Related
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Joshdmo said:
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Click to expand...
Click to collapse
You can get into recovery via ADB, Download the USB drivers for your device and then get the Android SDK tools, you can read up how to do that, then get into your platform tools folder, get a cmd prompt going, turn it on, and type "adb reboot recovery" as fast as you can before it freezes.
orangekid said:
You can get into recovery via ADB, Download the USB drivers for your device and then get the Android SDK tools, you can read up how to do that, then get into your platform tools folder, get a cmd prompt going, turn it on, and type "adb reboot recovery" as fast as you can before it freezes.
Click to expand...
Click to collapse
Thanks man, I now downloading the android SDK tools, but i can't find the usb driver, but i think my pc already has it installed because I rooted my tablet from here with unlockroot, anyways I will get it a shout and I let you now if i need some help, thenks for the answer so fast.
Joshdmo said:
Thanks man, I now downloading the android SDK tools, but i can't find the usb driver, but i think my pc already has it installed because I rooted my tablet from here with unlockroot, anyways I will get it a shout and I let you now if i need some help, thenks for the answer so fast.
Click to expand...
Click to collapse
yeah bro, let us know if it worked
Ok bro i did install the sdk and the plataformtools how i open the adb sorry i'm kind of noob in this sdk stuff
Sent from my LG-P500 using xda app-developers app
Ey man thanks for the help, I install recovery from ADB shell but for some reason every time i reboot my tablet the recovery is gone, so i restore stock rom but the touch is nota working and now i can't connect to adb because debugging mode is off in the tablet, any ideas? Please bro and thanks for the help
Sent from my LG-P500 using xda app-developers app
Hello. I have the same problem but where do you get the stock firmware?
Sent from my Xperia Mini Pro using xda app-developers app
Stealth Pro
siuishere said:
Hello. I have the same problem but where do you get the stock firmware?
Sent from my Xperia Mini Pro using xda app-developers app
Click to expand...
Click to collapse
Don't know if you're still having the same problem but if so, you're in luck. I have the same tablet, what I did to restore mine was to download livesuit to flash a recovery image onto your device. Of course everything will be deleted but once you're back into your tablet you can put all your apps back on &/or your custom rom. I was able to get CM10 onto mine running very smoothly so I recommend iit.
Anyway, use the recovery image for the ly-f1 tablet. It's exactly like the stealth pro trio tablet so you can use the same things. Just google "ly-f1 recovery image" download a good one and open it up in livesuit. After that you're gonna wanna put your tablet into download mode.To do that you wanna make sure the tablet is off. Plug your usb in. Press and hold the volume down button on your tablet while pressing the power button about 10 times or at least until you hear your computer respond. Livesuit will guide you there rest of the way. It's really simple.
GOOD LUCK.
YannaMariex said:
Don't know if you're still having the same problem but if so, you're in luck. I have the same tablet, what I did to restore mine was to download livesuit to flash a recovery image onto your device. Of course everything will be deleted but once you're back into your tablet you can put all your apps back on &/or your custom rom. I was able to get CM10 onto mine running very smoothly so I recommend iit.
Anyway, use the recovery image for the ly-f1 tablet. It's exactly like the stealth pro trio tablet so you can use the same things. Just google "ly-f1 recovery image" download a good one and open it up in livesuit. After that you're gonna wanna put your tablet into download mode.To do that you wanna make sure the tablet is off. Plug your usb in. Press and hold the volume down button on your tablet while pressing the power button about 10 times or at least until you hear your computer respond. Livesuit will guide you there rest of the way. It's really simple.
GOOD LUCK.
Click to expand...
Click to collapse
Can you tell me where would I find the Image files. I tried to using the livesuite i keep getting invalid img file with files that i have
trio7-a10-bma250-stockimg
and
trio7-a10-mxc622x-stockimg
Joshdmo said:
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Click to expand...
Click to collapse
Hi, I'm kinda of a noob at this stuff, but I've learned quite a bit recently from just reading around, so bear with me if I don't understand or need more specific instructions. I have the trio stealth pro 7 and it is always stuck on the boot screen with the android logo when I boot. I was attempting to flash cm9 on the tablet but after I wiped the tablet initially, i couldnt find the cm9 rom on my internal memory while in recovery mode, so I ended up turning off my tablet, which now doesn't boot up anymore (stuck with android logo). I found a fix where you can use livesuite and adb to fix this issue; however, after installing adb, my tablet is not being detected, (my phone does). My tablet is not being recognized by windows in general, and it doesn't show up under device manager. There was one part of the step where I need to install usb drivers for the tablet; however, I cant find any online. I have used the tablet before with my computer before the attempt to flash cm9, so I am guessing drivers should already be installed. I feel I can get this issue fixed if I can just get adb to recognize my tablet. Perhaps this fix is not the one I need and maybe there's a simpler fix. I'm just too dumb to have realized it. Another note to add is, pressing the combination of power and volume buttons does nothing. Please help!!! thank you!!
stock images download
Hi guys ... Trio tablet Is similar or the same as Ly-F1 tablets :cyclops: these stock images will work and can be downloaded from link bekow.. make sure you download live suite first, applicable drivers (adb/fastboot) and you should be good . Follow directions accordingly and as reminder ,, :highfive: ,,, flashing / adb / sdk should only be used by advanced users who are comfortable using the SDK ADB flash tools.. . I am in no way responsible for bricked devices... Happy Flashing. :cyclops:
http://lyxfsz.com/en/downs.htm?sortid=0_22 Downloads LINK
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hi u all!
First of all thank you for your time and sorry for my english, I speak spanish.
I have a nexus s i9023. I was using CyanogenMod 11 experimental 24042014.
I was having many problems and decided to downgrade to the stable version 10.1.2
It downloaded ok, installed all the updates, rebooted and then got stuck in the logo screen when booting.
The problem is that my nexus s has a broken the power button, it doesn't work.
As for right now the olny thing I can do is to enter the bootloader screen, but cant move throgh the options with the volume keys, it's like its stuck.
If I plug in the device when in the bootloader (fastboot mode) screen my PC doesn't recognice it, I search in the device manager but it doesn't appear.
If it helps when I plug in the battery the phone starts on in it's on.
Please, any help is appreciated.
Im really sad because I love my nexus.
Thank you!!!
Same here. Any help for us would be great. Thanks.
shd128 said:
Hi u all!
First of all thank you for your time and sorry for my english, I speak spanish.
I have a nexus s i9023. I was using CyanogenMod 11 experimental 24042014.
I was having many problems and decided to downgrade to the stable version 10.1.2
It downloaded ok, installed all the updates, rebooted and then got stuck in the logo screen when booting.
The problem is that my nexus s has a broken the power button, it doesn't work.
As for right now the olny thing I can do is to enter the bootloader screen, but cant move throgh the options with the volume keys, it's like its stuck.
If I plug in the device when in the bootloader (fastboot mode) screen my PC doesn't recognice it, I search in the device manager but it doesn't appear.
If it helps when I plug in the battery the phone starts on in it's on.
Please, any help is appreciated.
Im really sad because I love my nexus.
Thank you!!!
Click to expand...
Click to collapse
kijp15 said:
Same here. Any help for us would be great. Thanks.
Click to expand...
Click to collapse
Seems like a driver issue. Can you try installing the drivers in a different system?
If it goes well, then use install cwm touch recovery from fastboot. You can take backup and flash new ROMs after that.
Try Nexus Root Toolkit to install drivers if you don't have access to a different system.
smit.sanghavi said:
Seems like a driver issue. Can you try installing the drivers in a different system?
If it goes well, then use install cwm touch recovery from fastboot. You can take backup and flash new ROMs after that.
Try Nexus Root Toolkit to install drivers if you don't have access to a different system.
Click to expand...
Click to collapse
Don't I need to have android debugging enabled? If so, I don't think Nexus Root Toolkit will work. I flashed a ROM to my NS4g & I get boot loops. I flashed the wrong Gapps a few months ago.
I was hoping there would be a way to automatically turn android debugging on. I know it may sound dumb & also probably impossible.
Any other tips.
Tell me I'm screwed. Haha.
kijp15 said:
Don't I need to have android debugging enabled? If so, I don't think Nexus Root Toolkit will work. I flashed a ROM to my NS4g & I get boot loops. I flashed the wrong Gapps a few months ago.
I was hoping there would be a way to automatically turn android debugging on. I know it may sound dumb & also probably impossible.
Any other tips.
Tell me I'm screwed. Haha.
Click to expand...
Click to collapse
I disabled USB debugging. Rebooted to bootloader. Fired up 'fastboot devices' on cmd and could see my phone. This tells me that I do not need USB debugging on fastboot.
If you see an unknown device in Device Manager while in fastboot then use Universal Naked Driver to install the drivers. But since you don't, you'll need another PC to do this stuff. Once drivers are installed, you can do a 'fastboot reboot recovery' to get into recovery and fix the the problems. The first thing I advice is to flash a touch recovery. The rest is up to you.
Flash back the original soju firmware back onto your device by first using "nexus s root toolkit v.1.8.2 by wugfresh". It may take a little of your time downloading the roms and installing the drivers but trust me it should be working and your phone will boot into stock android 4.1.2. You can then root your device and install custom recovery as normal. Anything do pm me :laugh: ps, click the bricked option one the software is loaded up and remember to connect your device only and remove other phones from your computer
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol
I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com