Related
Hey so I found this great program called tugzip that not only unzips rar files but also checks updates to make sure they will work. After you download updates, themes open tugzip then go to actions, test. If no errors are found then your good to go. If error is found redownload. Works every time for me without having to run checksum and best part is its free. Just wanted to pass the tip along if anyone is interested in something like this.
http://www.filehippo.com/download_tugzip/
Not open source and no Linux ver = nothx.jpg
Hi everyone, this is a tool for easier switching of the radio, spl and recovery of a 32A Magic. Now written in Java!
Requirements:
Fully charged phone!
Engineering SPL! Get one here: http://forum.xda-developers.com/showthread.php?t=529019&highlight=hboot+collection
NOTE: If the program says that you DO NOT have root it means that you DO NOT have an Engineering SPL! (S-OFF)
Now a powerful program with a GUI that has several options.
The program allows you to flash the provided files, or select custom ones!
You may also erase the system, data and cache partitions, on demand or as part of the flashing process.
You may now watch the progress on your mobile and on the PC!
NEW! Able to erase partitions AND restore nandroid backups!
N.B! DO NOT RENAME OR TOUCH ANY FILES THAT YOU RECEIVE WITH THE PACKAGE! There is no need for you to mess with it because there are options for flashing CUSTOM files. (the ones you select)
HOW-TO:
1. Extract RadioSwitchGUI_v4.rar anywhere you like, but do not touch anything inside its folder.
2. Boot your phone into fastboot.
3. Connect it to your PC via USB.
Windows:
4. Run RadioSwitcherAPP.jar or WinRun.bat and select one of the options.
5. Enjoy the app.
Linux:
N.B Don't double click on the jar file. It will not load the folder options correct! Use the provided LinuxRun.sh!!!
4. Right click on LinuxRun.sh and choose "Properties".
5. Click on the "Permissions" tab.
6. Click on "Allow executing file as program" and enable it. If it is allready enabled then leave it!
7. Click "Close".8.Double click on LinuxRun.sh and choose "Run".
8. Enjoy the app.
Warning! The procedure involves RISK, by downloading the files you agree that YOU are to be held responsible in case of any damage.
WITH THE PROVIDED FILES IT CAN ONLY BE USED FOR THE OLD 32A MAGIC (W/O 3.5MM JACK)!!!
You can use custom files to use it for flashing ANY device though!
THIS PROGRAM WILL (by default) ERASE YOUR SYSTEM AND DATA PARTITIONS!
This program will NOT create a nandroid backup that you can revert to later, so do it manually.
I hope someone will find it usefull!
Enjoy!
I wish to thank
KOZE for testing the Mac version and providing the mac version of the fastboot program!
BIG thanks to mumilover who wrote the wonderful Java version!
Amon_RA for the recovery images.
CursorDroid for everything he has done and for hosting!
:No-Frost: for the idea and code improvements and the Spanish translation!!!
tomme45i for translating it into Polish!
Bcrook for making the (legacy) linux version!
capychimp for translating it into danish!
fabioccoelho for translating it into Portuguese (BR)!
VERSION "GUI v4" is out! The most secure version yet! (thanks mumilover!)
Full version: NOTE: Due to slight changes version number did not change. (thread version is 4.1, the program says 4.0)
DropBox
Lite version (only for those who used the previous versions!):
RapidShare
Direct download
N.B To use the lite version simply copy the contents of the .rar file above into your existing RadioSwitcher folder!
Older versions:
1. v."GUI":
RapidShare
Direct download
2. v."GUI 3.5":
RapidShare
Direct download
Legacy version:
English: http://www.theandroidkitchen.com/eyegor/Radio Switcher/Version 2/?download=Radio+Switcher+v2.1.rar
md5: http://www.theandroidkitchen.com/ey...n 2/?download=Radio+Switcher+v2.1+english.md5
LINUX: http://www.theandroidkitchen.com/eyegor/Radio Switcher/Version 2/?download=radio+switcher+linux.zip
N.B: PLEASE DOWNLOAD THE CORRESPONDING .MD5 FILE AND CHECK FOR CORRUPTION BEFORE PROCEEDING (Win only, linux has it integrated)
Great idea
Awesome idea, I like it, just a little concerning for noobs if a file is renamed as NEW instead of OLD it could cause a brick and vise versa
For those using this please follow the instructions provided carefully, and rename the correct readio/SPL to the correct names, Yes I know sounds simple enough.
Awesome work, might give it a try to revert to old radio to try the latest cyanogenmod ROM
and just wanted to suggest to include the Radio/SPL file combo's in the download to create a full package and simplify things even further.
I did include them all in the download link (I've made it more clear in the OP) The reason why i also provided just the batch file is cause some people might prefer using their own radio/spl/recovery combo
BTW, the new Cyanogen is simply amazing. It is as fast as 1.6/1.5! I'm currently running it...
Very useful but it returns me an error:
"CHOICE: invalid choice switch syntax. Expected form: /C[:] choices"
and then asks for installing the NEW radio
What's wrong ?
Did you press either 1 or 2 and NOTHING else?
I've tested it again, if i press any other number the computer beeps. You can only select 1 or 2.
The options work fine for me.
/c[:] "choice" sets from which values you can choose. in this case its 1 or 2
It just start with the error as soon as i run it, no menu and no way to choose between the two option even pushing 1 (or 2) while starting the batch.
I guess you have Vista/7; it must be something wrong with XP, I will let you know....
yes, i wrote it under win7...but it has to be compatible.
try downloading it again...
ill make a version in xp later today if you cant get it to work
I've tested it on other machines running XP with the same result, and works as it should on the only PC running Vista I have at the office.
ah ah, it's kind of amazing, it's the first time Vista does something better than XP ;-)
I think it depends on the different choice files in the two system (choice.com in XP - choice.exe in Vista)
Don't worry about me, I will revert to old radio step by step (I'm just courious to try the new Cyanogen 5 since the Hero update to 2.1 is still late)
Anyway, it will be a very useful tool for many people, so I hope you to succeed in get it working in XP too (of course if other people has the same errors in XP).
Thank you eyegor
SOLVED
choice.com (XP) and choice.exe (Vista) have different syntax (poor MS customers). I've made some testing and found:
Vista (as in your batch): CHOICE /N /C 12 /M "Press "1" for the OLD radio, or "2" for the NEW radio"
to get it working in XP must be translated to:
CHOICE /N /C12 "Press 1 for the OLD radio, or 2 for the NEW radio"
and, yes, this is sooo stupid IMHO ......... blame MS once again
Ill provide an xp version later today...or tomorrow if i dont succeed today..
Sent from my HTC Magic using the XDA mobile application powered by Tapatalk
Support for Windows XP added!
XP users please download the attached XP version!
Enjoy!
Thanks but...
"Please enter 1 for the OLD radio or 2 for the NEW radio."
2
This will flash the NEW radio!!! (HTC Magic 6.35.xx.xx)
Press any key to continue . . .
'adb' is not recognized as an internal or external command,
operable program or batch file.
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
All done!
Press any key to continue . . .
The REQUIREMENTS state that you need to have working ADB/fastboot...
You need to add them to your system path
eyegor said:
Support for Windows XP added!
XP users please download the attached XP version!
Enjoy!
Click to expand...
Click to collapse
Woww dude, you´re fast
Thanks
EDIT: When I did switcher-for-xp download, just come a batch file! No radio or spl files! Some idea?
just put that new file in the folder with radio/spl/recovery instead of the old file ;-)
Sent from my HTC Magic using the XDA mobile application powered by Tapatalk
Let me know how it goes if you use it!
BTW, Lubu, I only just saw what you wrote about XP, i implemented XP support in another way
Thank you for your assistance!
xD Didn't expect somebody will use this ... Glad to know somebody likes the Batch file... I will upload the latest version that includes files verification...
The only problem is that I need to translate the batch from spanish to english...
Dou you have MSN???
EDIT::
Translation done... I will try to contact you to send you my batch file, it's has more security as it doesn't allow to install any file if it's not present in a "default" folder...
As you did the thread first, I don't want to take the credit of it ^^...
Hi eyegor
I have made little modification to this batch files. Here are my version (Radio_Switcher_tomme45i.zip includes XP and standard version) - added few commands and fully translated to Polish lang.
Cheers
great!
ill add it to the op when i get home
Sent from my HTC Magic using the XDA mobile application powered by Tapatalk
Version 2.1 is now out!
It is more secure and has more options!
It will NOT work with old files unless they are renamed to fit the names of the ones mentioned in the OP!
Code improvements done by :No-Frost: and I!
Uploaded!
I definetly want to see the improvements made by you ^^...
I'm working in an executable file that doesn't need anything more than a download and execute to show you the options (probably not even ADB )...
Hello, this is a basic software, that let you calculate the MD5 about files/folder , with just drag and drop inside the box.
Two version, English, and Spanish
Requirements:
Windows OS
Java installed
Screenshots attached
MD5's (Yes calculed with Drag'n'MD5)
D72F2AEF02AEE27126C1CE867F3305DA - EN
076B8B8A510179BDBC6DCD27FAE0542A - ES
Changelog:
15.08.2011 - v1
Initial release
going to test it
you are GENIUS workig just like that
Where you drop them? Is md4 and sha1 next? Nice one mate!
New version uploaded, added comparison, and recursive comparison with clipboard
EDIT: Fixed bugs, reuploaded, enjoy!
Nice work mate! Only you should use some less boring animation during md5 calc Works great!
We've been waiting for this for sometime, thanks.
Thanks for the hard work, and i am appreciative. is this used to check the MD5SUM post downloading a ROM or flash-able .zip, or to verify the md5sum prior to publicly posting a ROM or flash-able .zip If it is used for verifying downloads, what is the difference between this and using the
Code:
# md5sum /mnt/sdcard/[file_name].zip
from within the adb shell?
neidlinger said:
Thanks for the hard work, and i am appreciative. is this used to check the MD5SUM post downloading a ROM or flash-able .zip, or to verify the md5sum prior to publicly posting a ROM or flash-able .zip If it is used for verifying downloads, what is the difference between this and using the
Code:
# md5sum /mnt/sdcard/[file_name].zip
from within the adb shell?
Click to expand...
Click to collapse
Drag'n'MD5 it's a software originally made to get ANY file MD5, but last release also have MD5 check, that means you can use for check downloaded zip MD5, or pre-check MD5 for publishing a zip.
The difference with adb shell it's that you can drag & drop ANY file, and get its MD5, based on substrings, and file digest.
*Note* Any it's on caps, because it's not specifically designed for get Zip's MD5.
Cheers,
D4.
Is installation necessary? Could you release a "portable" version (executable only)?
halfsoul said:
Is installation necessary? Could you release a "portable" version (executable only)?
Click to expand...
Click to collapse
Consideer it as an "unpacker", you can choose desktop (or any place you like), disable shortcuts, and just run it, as an portable app.
Cheers.
Could you make a Portuguese version?
I'm sure it won't be difficult for you, since you know Spanish.
Sent from my Milestone 2 XDA App
dangpzanco said:
Could you make a Portuguese version?
I'm sure it won't be difficult for you, since you know Spanish.
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I'm sorry but you're wrong, spanish syntax it's very different to portuguese, so it's not easy for me. Also would be more work, because I forgot to use multilanguage settings, and I did release 2 versions as you can see. So portuguese will be 3 versions. Just use English or spanish version.
Cheers.
I'm trying to use this software and when I drag a zip file into the "drag and Drop Here" I get the Circle with a line through it, and nothing happens.
I made sure to run it as and administrator on my pc, and I have windows 7 x64 version. 8 gig of ram, and a quad core processor.
The zip file is from Prime_v1.8.2.zip from the Transformer Dev Roach2010.
Although I just tried dragging a few txt files, and those don't work either.
D4rKn3sSyS said:
Consideer it as an "unpacker", you can choose desktop (or any place you like), disable shortcuts, and just run it, as an portable app.
Cheers.
Click to expand...
Click to collapse
I see. Just to confirm, it doesn't make any registry/uninstaller changes?
I am an administrator on my Windows 7 machine but when I try run setup.exe it tells me "You must be logged in as an administrator when installing this program." Any ideas?
halfsoul said:
I see. Just to confirm, it doesn't make any registry/uninstaller changes?
Click to expand...
Click to collapse
No, uninstaller it's an .ini file, not even touchs registry, don't worry.
Silly Man said:
I am an administrator on my Windows 7 machine but when I try run setup.exe it tells me "You must be logged in as an administrator when installing this program." Any ideas?
Click to expand...
Click to collapse
Right click and select Run as administrator?
Sent by Skeletor from Castle of Greyskull using XDA Premium App
metaldood said:
Right click and select Run as administrator?
Sent by Skeletor from Castle of Greyskull using XDA Premium App
Click to expand...
Click to collapse
I thought of that as well, but I get the same message!
AndroidSuite 2012
Coded & Tested by:
Tom Dolan (Scriptr)
Joel Duncan (Slethen)
AndroidSuite 2012 what it does
Decodes and encodes Dex files
Decodes and encodes APK files(Previously bugged in APKManager)
Gives a console output
Whats to be added?
Experimental features (currently in testing)
Thread piority
Config editor
Help file
System requirements:
Windows (XP/Vista/7)
1024x768 monitor resolution
512MB free system memory
Java (JRE/JDK 6 prefered)
Android Suite 2012 by Team Scripthen
APKs:
Place the APKs in the directory \apk\
refresh the list,
select from the first list box which one you want to decode then hit
"decode selected" you can then edit the source in "decoded-apks".
to re-encode, refresh the list again, the select from the second list which directory
you'd like to encode hit "encode selected" once the progress bar has stopped you can
then safetly remove the APK from "encoded-apks" directory.
Dex:
place your .dex file in the directory "\repo\Dex" go to the main window and then hit
"Decode Dex", then you can click "Open OUT Directory" to view the source code.
Once finished with the source code you can then hit "Encode Dex" to reencode it to
"classes.dex" which will appear in programs root.
Experimental:
Version 99 they do not work.
However, when they do work, this shall be updated but you are to be careful and
take note it is not our fault if anything goes wrong, as these are critical these
will be throughly tested to ensure the correct configuration is used.
Experimental features added:
Apply update.zip;
Applies an update.zip to the device,
please note:
To apply the update, the archive needs to be in %PROGRAMROOT%\repo\
Reboot;
Send reboot signal to the phone
Boot to fast mode;
Reboot the phone to fast mode
boot.img;
This has NOT been fully tested!!!
To apply the new boot image put it in %PROGRAMROOT%\repo\
It would be extremely helpful if you were to post bugs/errors on this topic so we can find them easier.
http://node2.scriptr.co.uk/Dev/AndroidSuite/
thanks,
Scriptr|Slethen=Scripthen
first of all, thank you for this, it looks great! However, I am unable to encode anything. I get a sound effect as soon as i click encode decoded directory and the progress bar moves at an incredibly slow pace. is it doing what it's supposed to do? I let it sit for 15 minutes and nothing ever happened.
How big is the apk? And whats your cpu speed?
the app size is 5mb and my cpu is an i5 clocked at 2.3ghz. the odd thing to me is that it doesn't seem to try to encode the apk at all. when the decode finishes, a chime goes off. that same chime sounds within half a second of my trying to encode the same app. The decode works perfectly though!
pokedroid said:
the app size is 5mb and my cpu is an i5 clocked at 2.3ghz. the odd thing to me is that it doesn't seem to try to encode the apk at all. when the decode finishes, a chime goes off. that same chime sounds within half a second of my trying to encode the same app. The decode works perfectly though!
Click to expand...
Click to collapse
Does the Console output give you any errors? or could you paste what the error is instead of clogging the chat.
What it sounds is that you dont have java recognised as a program. I will fix that when I log on Windows again.
please use pastie (google I cant use links yet) with the error so we can look into it.
-Tom.
pokedroid said:
the app size is 5mb and my cpu is an i5 clocked at 2.3ghz. the odd thing to me is that it doesn't seem to try to encode the apk at all. when the decode finishes, a chime goes off. that same chime sounds within half a second of my trying to encode the same app. The decode works perfectly though!
Click to expand...
Click to collapse
Updated, your problem might be fixed.
Might be an idea to state in the title or under system requirements whether this is for Linux or Winblows.
Hey, I just downloaded android suite, but seems that the zip is damaged.
The folders from the zip created, but no files and I get errors from winrar like this:
Unknown method in bin\apktool.jar
No files to extract.
I' ll try to download it again, but can you please check it?
EDIT:
Redownload it 5 times, same errors. Archive is damaged, shows that is 36,3MB, but need less than a second to complete download(which is wrong for sure).
unzip it with Winzip, winrar cant extract it.
dancer_69 said:
Hey, I just downloaded android suite, but seems that the zip is damaged.
The folders from the zip created, but no files and I get errors from winrar like this:
Unknown method in bin\apktool.jar
No files to extract.
I' ll try to download it again, but can you please check it?
EDIT:
Redownload it 5 times, same errors. Archive is damaged, shows that is 36,3MB, but need less than a second to complete download(which is wrong for sure).
Click to expand...
Click to collapse
I'll get right on it.
Must of been the compression method, also try with 7-zip.
Right, re-uploaded with 0 compression, the archive shouldnt cause trouble now.
I'm actually unable to even get the download to start. I get an error when I click the link from google saying they can't find the requested link. I've tried 5 times.
Somehow the link had been replaced by "*****"
Here's the direct URL:
http://node2.scriptr.co.uk/Dev/AndroidSuite/AndroidSuite-b112.zip
I will add a downloader soon so hopefully it will be more efficient.
I will integrate that in next release,
sorry for all the trouble so far.
Scribblezzz said:
Somehow the link had been replaced by "*****"
Here's the direct URL:
http://node2.scriptr.co.uk/Dev/AndroidSuite/AndroidSuite-b112.zip
I will add a downloader soon so hopefully it will be more efficient.
I will integrate that in next release,
sorry for all the trouble so far.
Click to expand...
Click to collapse
What exactly is in the archive that requires us to download 113mb? To decompile and recompile and apk all you need is:
Java - Already on my system
aapt.exe - Already on my system
apktool.jar - Already on my system
Command Prompt - Well duh, part of windows.
Could you provide screenshots of the application?
cornelha said:
What exactly is in the archive that requires us to download 113mb? To decompile and recompile and apk all you need is:
Java - Already on my system
aapt.exe - Already on my system
apktool.jar - Already on my system
Command Prompt - Well duh, part of windows.
Could you provide screenshots of the application?
Click to expand...
Click to collapse
It's got the Java binaries in the directory.
as some people dont have the "java.exe" patj, it fails to load it.
I will add some screenshots later, and I shall update it later, I just need to do more testing on Java findings...
personally I'm good to go. A simple scan with an anti-virus is all I need to ensure it's legit. I have a backup so I'll take the OP's word for it. Also, no need to apologize for "problems" IMO, I have no idea how to decompile/recompile or sign an apk so even if there are bugs, you're still doing me (and a lot of others) a favor. Thanks for all of the work you've put in so far!
Screenshot of AndroidSuite2012
so, every time I try to close the .exe, a web browser opens that takes me to ad.fly.... not sure what that's about. I don't know what the link was for, so I closed it and didn't click anything. Also, the utility still doesn't seem to be able to recode the apk. the error message I received is in a .txt file attached to the link below. I didn't want to post this whole thing inline.
http://www.box.com/s/yoaxly1na5mjqhjralca
sorry, double post
I see the problem..
I will start to work on the fix later today...
Also I will test better java detection reducing the archive about 70 or so megabytes...
Sorry for the bulk archive it was just a temporary solution...
Thank you again for posting error log.
-Scribblezzz.
SVN Updater
Introduction:
This is my first thread in XDA. It is just meant to help flashohoolic people to prepare automatically installable aroma zip files based on SVN releases of their favourite ROM.
Description :
It is an Excel file combining formulas and some VBA Code to create Aroma Zips Automatically with appropriate changelog for the revision and the some specific additions to aroma-config and updater-script files.
ChangeLog :
V1.0 Initial release
V1.1 Added automated zipping
V1.2 Cleaning Folders after Zipping
V1.3 Changed messagebox text when cleaning update folder
V1.4 Added FTP Support
ToDo:
Give some colors to this thread
Add automatic SVN Update and Export
HowTo:
You must have already set up SVN on you computer
Extract Zip file somewhere on your computer
Open the excel file in it
Click on button 'Choose SVN Folder'
Before clicking on 'Go' button, Follow the steps in the sheet named 'HowTo'
Thanks
Amarullz for Aroma
ONEderground team : belsj, ziaul.ch, hunt, harbir, bilal_liberty and pawlso1984
Again harbir for theming aroma
InsertCoin team for giving me a reason to do this (their exceptional ROM)
PS
As it is, the Excel file is preconfigured for my SVN of InsertCoin ROM. I just removed the FTP password
You may do all the modifications you want, use it, share it,..
Downlaod link
V1.4
reserved 1
Reserved 2
Great App! A must use to remain updated!!
Thnaks Hedi, Belsj and all the team
Sound interesting, is this app compatible with OSX?
stlouie65 said:
Sound interesting, is this app compatible with OSX?
Click to expand...
Click to collapse
does osx support VBA? if yes then it may be adapted then.
Sent from my HTC One using Tapatalk
Great work. Exactly what I needed. Only if it worked with 64bit excel.
Will see if I can get it to work. But need time. Awefully busy.
EDIT Added PtrSafe attribute to Declare statetements and seems to pass that error. Now when I say go, I get two popups: One to clear initially exported files, and two to FTP upload. But nothing happens then. Is FTP a must?
EDIT2: Something happens. I get an output with 2228KB size that only contains the META INF directory.
Hi,
don't work on 64bit Windows
regards
starbase64
eyosen said:
Great work. Exactly what I needed. Only if it worked with 64bit excel.
Will see if I can get it to work. But need time. Awefully busy.
EDIT Added PtrSafe attribute to Declare statetements and seems to pass that error. Now when I say go, I get two popups: One to clear initially exported files, and two to FTP upload. But nothing happens then. Is FTP a must?
EDIT2: Something happens. I get an output with 2228KB size that only contains the META INF directory.
Click to expand...
Click to collapse
ftp isn't a must comment the call for that function.
you are meant to export Modded files from svn to the folder. see the HowTo sheet in the file.
Sent from my HTC One using Tapatalk
starbase64 said:
Hi,
don't work on 64bit Windows
regards
starbase64
Click to expand...
Click to collapse
I have 32bits excel sorry. seems like the post before yours found the solution.
Sent from my HTC One using Tapatalk
hedifezai said:
ftp isn't a must comment the call for that function.
you are meant to export Modded files from svn to the folder. see the HowTo sheet in the file.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
stupid of me, didn't see that sheet.
after going thru how to, it works great with that change I posted above on win8.1 64bit with 64bit excel. thanks.
when trying to use this program I get the error as attached.
durius said:
when trying to use this program I get the error as attached.
Click to expand...
Click to collapse
I'll need to know what changes you have made to sheets. And if you have followed all the steps described into the file itself.
hedifezai said:
I'll need to know what changes you have made to sheets. And if you have followed all the steps described into the file itself.
Click to expand...
Click to collapse
Yes I have followed the instructions contained in the how-to sheet.
When I click go it gives me that error
Thanks for your help
Please make a screen shot of the error itself not the instruction.
hedifezai said:
Please make a screen shot of the error itself not the instruction.
Click to expand...
Click to collapse
I have already found a way to make the script work.
Anyway, the files I create cause an error while flashing like this E: error executing updater binary in zip '/sdcard/flash/svn/SVN_IC_UPDATE_R195.zip.
Error flashing zip '/sdcard/flash/svn/SVN_IC_UPDATE_R195.zip
I have tried several times and error persists
thanks for your help
Thanx
Sent from my HTC One using XDA Free mobile app
I have too same problem.