I recently replaced the screen on my Inspire because the touch digitizer didn't work and the LCD back-light always remained on. I thought the problems were related but after replacing the screen (LCD and digitizer) the touch works but the back-light is always on. Even if I shut it down the normal way(hold screen lock select shutdown) it says on, the back-light not the phone. I have to pull out the battery or shut down through recovery. Does anyone know why this might happen or any way to turn off the screen back-light?
I also can't adjust the screen brightness it is always 100% and this is killing my battery.
I'm guessing their is no way to fix this but I thought I'd ask. Plus my Inspire like this is still 1000 times better than using my Motorola Flipside.
Edit : (Mod please move to Q&A)
Related
I recently got a touch pro of a friend with a damaged screen that didn't turn on but the touch screen was responsive. Apparently he sat on it and the screen broke.
I then acquired it and replaced the LCD screen and i turned it on but all it shows is a blank black screen with the backlight on. I was tapping while it booted up and it was making that beep noise so i know the touch screen works. What do i do now.
dazz245 said:
I recently got a touch pro of a friend with a damaged screen that didn't turn on but the touch screen was responsive. Apparently he sat on it and the screen broke.
I then acquired it and replaced the screen (with digitalizer) and i turned it on but all it shows is a blank black screen. I was tapping while it booted up and it was making that beep noise so i know the touch screen works. What do i do now.
Click to expand...
Click to collapse
if the lcd is damaged and you only replaced the digitizer then that wont solve the problem, the digitizer just sits ontop of the lcd and recognizes your touches, hence why it mite know that your touching the screen but the screen is still blank
mancsoulja said:
if the lcd is damaged and you only replaced the digitizer then that wont solve the problem, the digitizer just sits ontop of the lcd and recognizes your touches, hence why it mite know that your touching the screen but the screen is still blank
Click to expand...
Click to collapse
I replaced the LCD along with the digitalizer. Tats what i meant.
Sounds like either the new screen is inop on fit (fraid you need another to test, then send the first back as faulty), or the fault is not the LCD itself.
Possibily its the wrong screen, or its not installed correctly, or you damaged either the screen or the controller when installing.
I'm afraid you dont have many options - take it apart & rebuild to ensure correct parts & fitment, spend £££ on alternative parts to see whats broken (or serious £££ on test equipment!), send it off for repair or give up!
I'd go for option 1 first
If your friend sat on it hard enough to break the screen, i'd be looking for any damage / cracking to the boards / ribon cable mounts and be looking very carefully at the mountings of any IC chips. Incedently, when (s)he sat on it, did the screen work at all? and was it 100% working before they did?
Okay thanks for the replies. I just bought a flex cable where the slider thing is because the old one looked a bit old and flexed out and on inspection of the old screen i found a tiny rip on the screen's flex cable too. I wait for my cable and see if it works and if it doesn't then i'll sent the screen back as faulty and get a new one and if that doesn't work then I'll give up and sell it again
hi
sorry to wake up an old thread.
so what's your solution/conclusion?
is it the flex, or the LCD that broke?
i have the same problem right now.
thanks
was mainboard
Hi! Two days ago, my phone dropped in water , i put them immediately in rice until today. When start it with the power button, i felt the vibration and i hear the open sound. But the screen remains black... but i discover that it was just the backlight because when i watch the screen under a lamp i can see the interface and slide between pages... but its very dark. Is it possible to change this backlight? or just wait few other days to allow time to dry fully. I welcome your suggestions! thanks
samnup said:
Hi! Two days ago, my phone dropped in water , i put them immediately in rice until today. When start it with the power button, i felt the vibration and i hear the open sound. But the screen remains black... but i discover that it was just the backlight because when i watch the screen under a lamp i can see the interface and slide between pages... but its very dark. Is it possible to change this backlight? or just wait few other days to allow time to dry fully. I welcome your suggestions! thanks
Click to expand...
Click to collapse
When there's water involved, IT's hard to know exactly what damaged. Could be just stain on the ribbon connectors, a burned fuse/diode/resistor (all of them micro sized) etc.. or just the LCD's backlight damaged entirely.
Keep it on rice for more time. I would make the battery to discharge to 0%, But it's also more recommended to keep the phone OFF. Only my friend LUCK knows.
To change the backlight, the whole screen needs to be changed.
Backlight died on me. Possible moisture.
First, it was on boot loop (on stock rom)
i went to restart it (holding power button and volume down)
then the screen turned bright white, restarted it and then the backlight died, dismantled the phone, now still in rice, also happened on 2nd April.
Any help is greatly appreciated.
Sherman Han.
Problem Solved.
coly37 said:
First, it was on boot loop (on stock rom)
i went to restart it (holding power button and volume down)
then the screen turned bright white, restarted it and then the backlight died, dismantled the phone, now still in rice, also happened on 2nd April.
Any help is greatly appreciated.
Sherman Han.
Click to expand...
Click to collapse
Took it apart down to the Screen (not the screen layers), left it in rice, works like a brand new now. Cheers.
I just replace all the frame and lcd for a new on my nexus 5, but the problem was still there... no backlight, i can see a little bit the screen, but it's very dark... do you have any idea for try to repair this, because now i don't think that it's the screen but more a motherboard or power problem for the backlight :S
exactly same problem here
nexus 5 phone dropped in water.
Backlight went out permanently - rice didn´t help.
Can see the display working using a flashlight - so rest of the phone seems to be working ok.
Just pruchased a new screen, put it all in and still the same problem: display works, touch works, backlight is off.
So it seems the backlight part of the display receives no power - anybody has an idea how to fix that?
thanks
I have answer to this!
I have had this problem like 3 months now and i finally fixed it.
Basically what i did was that i bought a broken nexus 5 (only the screen glass was broken) and tried to swap every part one by one. The one that was not working was the main dock!
It is a cheap fix, like 10£ on Ebay.
I am writing this post because anyone else haven't.
I hope that someone sees this.
I now copy this message to all other threads so people can fix their nexus 5's
PS:as you can probably tell English isn't my first language.
Hello! I am having the same problem. The cell phone fell to the floor and the next day the problem began. The display is not broken.
What are you taking about when you say "main dock"? Motherboard aka mainboard?
Thanks!
Hi,
I have this really weird stuff going on with my Nexus 5 screen. I cracked it a couple months ago and bought a legit replacement screen for it and installed it myself (glass, lcd and frame). I fixed it with good instructions and it worked properly for two months. However though, now when I take it out of a pocket and try to turn screen on, sometimes it just doesn't light up. It's still on and every button works but the screen doesn't turn on. I have to give it a light tap or two on the back in order to make it light up again. Same thing happens sometimes when I'm using the phone normally, the screen just goes black and goes on after tapping it couple of times. Otherwise the phone works normally like it did when I bought it two years ago and after running couple of tests with screen, everything seems to work from touch interface to the graphics card.
Tried looking it up, no results.
I've noticed that the front camera doesn't work for some reason (probably just broken) and the battery lasts in use only 2-4 hours which isn't that much of an issue since I'm looking for a new phone. I just want this one to last long enough till I buy a new one.
It comes up when tapping the screen or power button? It could be a power button issue.
The screen comes back on when tapping the screen or the back of the phone. The power button isn't the issue. The screen just goes black but nothing else happens. It doesn't turn off or go to sleep mode.
Strange issue. I've never experienced it and any problems I had were related to the power button.
Could it be a loose connection inside the phone? Maybe an issue related to the proximity sensor?
Thats actually what I've thought. I have checked the phone's insides twice and didn't see loose connections, and the problem feels like it's related to proximity sensor since the screen going black happens exactly same way that when calling someone or doing something else where proximity sensor shuts the screen. It's really weird though...
Huh, I took backplate off and unscrewed the motherboard cover and took everything apart and rebuilt it and now the problem is gone. Seems like there was just some bad connection somewhere.
Glad you got it to work without having to pay someone to fix it
I dropped my gs6 and the screen cracked but the screen doesnt turn on.
The led indicator and soft button turns on but there is no life on the screen itself.
So does this mean that i only need to replace the screen or is there some internal damage like motherboard etc?
I thought if you crack your screen it does show you whats on the screen but you cant interract with it.
Sorry for my very bad english.
Thanks!
Should be broken only display, not motherboard etc but in the worst case can be also something like that. Try to do something on the phone when is supposedly turned on, for example change volume level or turn on the silence mode. If something will be happened for example some sound or vibration, then there is a chance...
Hi
I have Mate 7 MT7-L10.
I smashed the screen and bought replacement screen from ebay.
After replacement phone started OK for 2min. After that no display.
I took of lcd connection and reconnect but no luck.
Then tried battery connection and reconnect after few seconds.
It started for a while then turned off again.
So need to do the battery and LCD connection again to get the display.
If I don't flip the phone it stays on display.
As soon as I flip over to put all screw and put the back cover display goes off. Then I need to reconnect everything.
I got display more more than 30 min while just left stable.
Any idea how to fix this.
Thanks
I have the same problem, but in my case the screen displays a set of white footprints, the date and time. It won't let me get past that after. I know it's not the digitizer since I can boot into recovery twrp and make selections, but booting the system brings me back to the display of the footprint in the center screen. No idea why it's like that...only after I replaced my broken lcd it gives me this problem.