I connected my phone as usual to the computer via usb but all it does is charge.
No usb icon, no popup on computer no missing id just charging as if it was plugged in to a wall outlet.
never had this problem before
any ideas?
LRiley said:
I connected my phone as usual to the computer via usb but all it does is charge.
No usb icon, no popup on computer no missing id just charging as if it was plugged in to a wall outlet.
never had this problem before
any ideas?
Click to expand...
Click to collapse
Are you stock or modded?
Solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect
Sent from my GT-I9100G using xda app-developers app
shinjielric said:
Are you stock or modded?
Click to expand...
Click to collapse
modded
xdadarun said:
Solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
*#7284# did nothing in the dailer for me...
any more ideas?
LRiley said:
any more ideas?
Click to expand...
Click to collapse
try reinstall driver
turn on usb debugging?
snowman9031 said:
try reinstall driver
Click to expand...
Click to collapse
did that
fr8cture said:
turn on usb debugging?
Click to expand...
Click to collapse
already is
did you try a different usb port?
fr8cture said:
did you try a different usb port?
Click to expand...
Click to collapse
have 6 tried all
Are you on a custom rom?
fr8cture said:
Are you on a custom rom?
Click to expand...
Click to collapse
yes on clean rom 2.5
been on it since release and it was working fine
did you try clear cache, dalvik cache, fix permissions?
fr8cture said:
did you try clear cache, dalvik cache, fix permissions?
Click to expand...
Click to collapse
nothing still
When you re-installed the drivers on your computer did you first remove the old ones? Or just run the install again? (Stupid question, I know, but I had to ask)
I've ran out of ideas the last think i can think of is restoring to a backup or odin back to stock...
Brian Gove said:
When you re-installed the drivers on your computer did you first remove the old ones? Or just run the install again? (Stupid question, I know, but I had to ask)
Click to expand...
Click to collapse
installed over but Im pretty sure its not the comp because other devices work perfectly fine and regardless if drivers are installed or not the computer would detect unknown hardware
Uninstall the drivers then re-install them. I'm 99.9% positive that will work for you. For some reason they corrupt or something, and your computer wouldn't recognize it as new hardware if it thinks it already has the drivers installed.
Brian Gove said:
Uninstall the drivers then re-install them. I'm 99.9% positive that will work for you. For some reason they corrupt or something, and your computer wouldn't recognize it as new hardware if it thinks it already has the drivers installed.
Click to expand...
Click to collapse
tried it still nothing
fr8cture said:
I've ran out of ideas the last think i can think of is restoring to a backup or odin back to stock...
Click to expand...
Click to collapse
...(-_-) can't odin
Related
i cant get kies to work,i cant root, i cant even get it to be recognized by my pc. ive installed drivers,installed .net4 and other stuff but it just wont connect to my computer. im running vista 32 bit,this sucks. any help will be greatly appreciated
It's pissed me off for months.
damn,i at least wanted to remove the bloatware,i cant even do that
Where did you get the drivers?
What cord are you using, oem, or cheap one bought some where?
Have you tried different ports?
Mikey us f ing with you he is a dev
mcord11758 said:
Mikey us f ing with you he is a dev
Click to expand...
Click to collapse
It's kinda why I'm a dev.
im using the cord that came with the charger,i got the drivers off of the how to root post here on xda,i like the phone but i want flash and i want to be able to add video and music and i want to try and root
When you plug your phone into your pc what happens
Try these, click software tab
http://www.samsung.com/us/support/downloads/SGH-I897ZKAATT
To get my pc to recognize my captivate I had to use my rear usb not my front ones.
Sent from my SAMSUNG-SGH-I896 using XDA App
And what is your USB settings set to? If you don't know, go to:
Settings->Applications->USB settings
I tried all of the ports and have tried usb debugging and mass storage and kies
Sent from my SAMSUNG-SGH-I897 using XDA App
Try different drivers. Like the link I posted. Sometimes you may have to lead your computer to the drivers. When the pop up says unknown device click on it. You will need to know where the drivers are saved. Guide it to the drivers
Or you can insist you have done everything and in which case why create a thread
i installed the drivers,now do i need to restart my computer, thx again
Then take it into an AT&T store and see if they can make an USB connection. If not, then you can get the phone replaced with one that does work.
TopDogg1 said:
i installed the drivers,now do i need to restart my computer, thx again
Click to expand...
Click to collapse
Yes, always reboot after installing drivers. It's the safe bet.
Ok ill try that and see if it works...thx guys..i hope i can get this thing workin right
Sent from my SAMSUNG-SGH-I897 using XDA App
that still didnt work,i have usb debugging turned on,any more suggestions
TopDogg1 said:
that still didnt work,i have usb debugging turned on,any more suggestions
Click to expand...
Click to collapse
Take it to the store and have them do it. Tell em you want to put music on it and it won't connect.
From a phone
TopDogg1 said:
that still didnt work,i have usb debugging turned on,any more suggestions
Click to expand...
Click to collapse
Did you pull down the notification menu click mass storage, select mount
Take a screen shot of the my computer folder
From a phone
Kies used to recognize my phone till it was on JF6 stock. Even after 2.1 update 1 JF7, it stopped connecting.
Well a few days I rooted with SOC worked for a couple days now USB doesn't work at all. It charges just fine but computer does not recognize an external device, nor does my SGS4G. This has been happening with multiple computers and multiple cables, which are the 2 solutions I have found. And yes, I did try restarting my phone, toggling debugging mode, toggling SD card mount, etc.
Thank you for any help I can get.
i am having the exact same issue...i will be watching this thread...sorry i can not help
AndyYankee17 said:
Well a few days I rooted with SOC worked for a couple days now USB doesn't work at all. It charges just fine but computer does not recognize an external device, nor does my SGS4G. This has been happening with multiple computers and multiple cables, which are the 2 solutions I have found. And yes, I did try restarting my phone, toggling debugging mode, toggling SD card mount, etc.
Thank you for any help I can get.
Click to expand...
Click to collapse
Interesting problem. I've not used SOC so I may be useless here, but have you tried unrooting with SOC to see if it solves the problem?
If its not recognizing your external SD card have you tried reformatting it?
Sent from my SGH-T959V using xda premium
stephen_w said:
Interesting problem. I've not used SOC so I may be useless here, but have you tried unrooting with SOC to see if it solves the problem?
Click to expand...
Click to collapse
I can't unroot, because it connects to the phone via USB
Exodian said:
If its not recognizing your external SD card have you tried reformatting it?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I could, but it's not recognizing a connection. When I try to tether it says "USB not recognized". I think it's more low-level than the SD card.
Have you tried downloading the drivers again?
Sent from my SGH-T959V using XDA App
I don't think it's a driver issue, neither my Windows 7 box, nor my CR-48 (Chrome OS) see it as a device. If I had bad drivers it would say "unrecognized device", right? It's just allowing electricity, not data to go over the cable.
AndyYankee17 said:
I don't think it's a driver issue, neither my Windows 7 box, nor my CR-48 (Chrome OS) see it as a device. If I had bad drivers it would say "unrecognized device", right? It's just allowing electricity, not data to go over the cable.
Click to expand...
Click to collapse
Have you tried a factory data reset? Heck, maybe just shut it off, remove the battery, put it back together, and hope for the best?
ok....here is what i did....power down,remove sim card and sd card...power up,plug into computer...it recognizes the phone....so it has to be the sd card i would assume...at least it worked on mine....try it,and let us know please?
stephen_w said:
Have you tried a factory data reset? Heck, maybe just shut it off, remove the battery, put it back together, and hope for the best?
Click to expand...
Click to collapse
I can but it says it does not affect firmware. As far as power cycling it like that? yes
joeblow7272 said:
ok....here is what i did....power down,remove sim card and sd card...power up,plug into computer...it recognizes the phone....so it has to be the sd card i would assume...at least it worked on mine....try it,and let us know please?
Click to expand...
Click to collapse
Did that, no effect.
AndyYankee17 said:
I can but it says it does not affect firmware. As far as power cycling it like that? yes
Did that, no effect.
Click to expand...
Click to collapse
Yeah, my bad. I saw that in the OP and forgot. What ROM are you running on it? Would it be worth your time to flash a different ROM to see if it makes a difference?
Could be a hardware issue & possibly unrelated to SOC. I'm not a hardware guy, though, so I'm not sure what tools you need/can create to test the USB port.
stephen_w said:
Yeah, my bad. I saw that in the OP and forgot. What ROM are you running on it? Would it be worth your time to flash a different ROM to see if it makes a difference?
Could be a hardware issue & possibly unrelated to SOC. I'm not a hardware guy, though, so I'm not sure what tools you need/can create to test the USB port.
Click to expand...
Click to collapse
I am running Firmware 2.2.1, kernel 2.6.32.9, Build number FROYO.VUVKD1.
I can't even send it in for warranty because it's rooted.
AndyYankee17 said:
I am running Firmware 2.2.1, kernel 2.6.32.9, Build number FROYO.VUVKD1.
I can't even send it in for warranty because it's rooted.
Click to expand...
Click to collapse
I can only assume CWM isn't installed, eh? If not, then I had to admit I'm at a loss. I don't know hardware so I'm not sure what you would use or how you would use it to test the USB port.
Well, sorry my way didn't help...i tried for you buddy...
Sent from my SGH-T959V using XDA App
Well, what's CWM?
AndyYankee17 said:
Well, what's CWM?
Click to expand...
Click to collapse
I probably can't give you a great explanation, but CWM is the ClockWork recovery Mod. It's a mo-better recovery mode for the phone.
Take a peek at a better definition here:
http://forum.xda-developers.com/showthread.php?t=1172628
Thanks to golmar88 for putting that together.
if you were to use superone click always use rage against the cage...
also if you have issues with your phone stick it in download mode and plug it into the pc if it was a rom issue your pc would pick it up as download mode is done by the bootloaders not the rom... if it sill not working eather a you have a faluty cable can happen b you do have messed up drivers c you have a debunk usb port... if you still have root access.. you can still instal a new rom just goto krylons cwm final thread use search kinda hard to miss its called KRYLONS CWM FINAL download the files stick them on your sd card ... eather downoad to yuour device directly or use a usb card reader..
oh and for odin to work right 99 percent of the time yuo gotta plug the usb cable into the PORT YOU INSTALLED THE DRIVERS ON
Well, I was able to get USB recognized ONCE, on my laptop that I use for the charging. So, it gets plugged in every day and got recognized once. Unable to reproduce.
I have the same issue, have you tried going settings>wireless and network > Usb utilities click connect storage to PC and then connect the usb cable?
mine says mtp connected but windows still doesn't recognize it
Im having the same.problem to...once i used super one click my computer won't recognize my phone...i have the same builds as you...and even tried to change my drivers...nothing worked...im stuck too...
Sent from my SGH-T959V using XDA App
My phone died and requires me to flash boot.img in order to bring it back to Android. To my surprise, I couldn't get it to go, and after some testing it seems my USB port is having an issue where it won't connect data, but will charge. Both of my computers with seperate USB cords are stating that the USB device has malfunctioned. Does anyone know of a good solution? I know there are the pogo pins on the back, but I don't know if there is anything that connects to them or if they transfer data. Is my only option at this point looking for someone to do a USB port repair for me? Any ideas would be very welcomed. Thanks!
Not sure exactly what your problem is? Boot.bin? What exactly is that?
RollTribe said:
Not sure exactly what your problem is? Boot.bin? What exactly is that?
Click to expand...
Click to collapse
Probably boot.img
Sent from my HTC One XL using xda premium
serotoninzero said:
My phone died and requires me to flash boot.img in order to bring it back to Android.
Click to expand...
Click to collapse
Where is it now if not Android? There are only certain instances that the computer will recognize it. Try a different computer as well (fresh install of HTC drivers).
chris948 said:
Where is it now if not Android? There are only certain instances that the computer will recognize it. Try a different computer as well (fresh install of HTC drivers).
Click to expand...
Click to collapse
Sitting at the bootloader as well as TeamWin recovery usb mount. Both times comes up as USB device not recognized.
serotoninzero said:
Sitting at the bootloader as well as TeamWin recovery usb mount. Both times comes up as USB device not recognized.
Click to expand...
Click to collapse
You are trying to go into fastboot, right, and not just regular bootloader.
I connect my tablet to my two laptops, one is win 8.1 and the other osx, neither shows any sign of knowing the tablet is connected at all.
it does not prompt me to instal any drivers, i dont see it in device manager though i could be missing it. definitely doesnt show up in file explorer as a drive. have tried switching from mtp to ptp and back again. I have no dea. The same cable when connected to the charger works fine, but no sign of life on a computer.
I'm trying to root it and get CM10 on there but this is stopping me in my tracks.
edit: i also just tried an older windows xp computer, no luck their either.
Bad cable?
Turn in USB debugging in developer options?
sbdags said:
Bad cable?
Turn in USB debugging in developer options?
Click to expand...
Click to collapse
Tried both that I own. And it charges fine. Also tried connection the keyboard dock and then the cable to that. Out of ideas.
USB debugging has been enabled and disabled multiple times. Multiple reboots. I'm going to try rolling back the firmware from .10 to .8
edgex said:
I'm trying to root it and get CM10 on there but this is stopping me in my tracks.
Click to expand...
Click to collapse
You don't need to root it to install a custom ROM, you need to unlock the bootloader.
_that said:
You don't need to root it to install a custom ROM, you need to unlock the bootloader.
Click to expand...
Click to collapse
Well its successfully unlocked. But I'm like 99% sure I need root for goo manager to install twrp. Or USB to work to install twrp via fastboot.... No?
edgex said:
Well its successfully unlocked. But I'm like 99% sure I need root for goo manager to install twrp. Or USB to work to install twrp via fastboot.... No?
Click to expand...
Click to collapse
I wouldn't start installing custom anything without working fastboot and adb access.
- Make sure the contacts of the connector and cable are clean.
- Do the equivalent of "lsusb" under OSX to check if the tablet is detected.
- Try different USB ports.
_that said:
I wouldn't start installing custom anything without working fastboot and adb access.
- Make sure the contacts of the connector and cable are clean.
- Do the equivalent of "lsusb" under OSX to check if the tablet is detected.
- Try different USB ports.
Click to expand...
Click to collapse
Have tried five ports accross three computers on three operating systems. Two usb cables, and the use of the dock should have bypassed any dirty connections. I can try Ubuntu live boot tomorrow if it comes to that.
Sent it off to get fixed, they verified they had the same problem, waited weeks for a replacement part, they replaced it and sent it back. And its doing the samn damn thing. So done with this tablet.
edgex said:
Sent it off to get fixed, they verified they had the same problem, waited weeks for a replacement part, they replaced it and sent it back. And its doing the samn damn thing. So done with this tablet.
Click to expand...
Click to collapse
Did you freeze or disable your system apps by any chance?
LetMeKnow said:
Did you freeze or disable your system apps by any chance?
Click to expand...
Click to collapse
No, and I would think a factory reset which I've done multiple times would have undone that even if I had on accident some way.
edgex said:
No, and I would think a factory reset which I've done multiple times would have undone that even if I had on accident some way.
Click to expand...
Click to collapse
How do you connect the tablet to the PC? Always through the dock USB?
Do you have the same problem when connecting the tablet directly? Undock it, use the original cable to connect to different USB ports.
Hey there,
I've tried every thing' download kies, used another usb cable, turned off computer/s6 device , usb debugging on/off
nothing helped, what else can I try to be able to connect to my computer ?
Gabi_Medayev said:
Hey there,
I've tried every thing' download kies, used another usb cable, turned off computer/s6 device , usb debugging on/off
nothing helped, what else can I try to be able to connect to my computer ?
Click to expand...
Click to collapse
Have you tried downloading drivers for the S6? (Not entirely sure they even exist but I would assume they do)
Japultra said:
Have you tried downloading drivers for the S6? (Not entirely sure they even exist but I would assume they do)
Click to expand...
Click to collapse
I tried to find and look for them but didn't found...normal gs6 g920f... 32gb white
Gabi_Medayev said:
I tried to find and look for them but didn't found...normal gs6 g920f... 32gb white
Click to expand...
Click to collapse
How about using a different usb port?
Japultra said:
How about using a different usb port?
Click to expand...
Click to collapse
already tried this... :/
http://www.robvanderwoude.com/devcon.php look for RemoveUSB.bat file and run it as admin.
tommybrrr said:
http://www.robvanderwoude.com/devcon.php look for RemoveUSB.bat file and run it as admin.
Click to expand...
Click to collapse
do you mean renewusb.bat, there is not remove ?
Gabi_Medayev said:
do you mean renewusb.bat, there is not remove ?
Click to expand...
Click to collapse
right,sorry for the typo
You can find Samsung USB drivers here.
http://www.teamandroid.com/download-android-usb-drivers/
Alternatively, the drivers should automatically be installed when you install Smart Switch desktop app which you can get from Samsung's website.
Once the drivers are installed you should be and to plug in the phone and all should be OK.
I'd have thought that installing Kies would have fixed your issue so the above may not work but my fingers are crossed for you
Sent from my Galaxy S6 Edge