I've tried a bunch of new 6.5 UI roms and I am facing this problem with all of them.
1. The OK button (bottom right) does not close applications. It simply minimizes them. This is really frustrating since I dont know what apps are open until i pull up the task manager. This also drains battery life. How do i make the OK button close an app? (detailed instructions appreciated)
2. The earlier UI used to have a quick task manager on the top right corner from which we could switch apps and close them. that doesnt come anymore, instead i get this new and useless notification bar. How do i make it show the quick task manager? (detailed instructions appreciated)
The above 2 make it really annoying to switch/close apps because once u minimize, the only way to go back to them it seems is to pull up dot fred task manager.
3. Pressing the home button on the device while running an app (the home iconed hardware button under the screen) takes me to the opened start menu not the home screen. when i exit out of the start menu it takes me back to the app, so i cannot access my homescreen unless i press ok on the app and minimize it, is there any way to make the hom button take me to the homescreen?
Thank you in advance?
1 & 2 : use showcase : http://forum.xda-developers.com/showthread.php?p=4030896
3 : use end button instead of home (which is an HTC non-sense, get the start menu like your rom is configured is really a better idea)
fantastic app - showcase. that solves my task manager problem, but i still have to press start, go to apps and press showcase to bring it up, can i have it mapped on the notification area so i can simply fire it up without having to go to the start menu?
thanks.
I have been having issues with Showcase not wanting to install or run properly on the newest 6.5 build 23071. If I load v1.0.1 It will work for the most part and I can configure it to still to close a program by clicking on the clock.. How ever when I switch to the newer 1.1.0 build I can not get the lower X to close thing like it should by either holding it or by setting to single tap.
I'm currently doing a hard reset because of trying taskfacade and trying to go back to Showcase.
i just installed 1.1.0 and it seems to be working fine. i even managed to figure out how to bring it up from any app. just tap and hold the win key and it comes up. very nice software.
Ya I have it back up and working. The only other issue to look forward to with Showcase is that some report it closing tmail.exe from time to time. I also map my PTT short press to open it for those programs that take the full screen and do not have the Windows icon.
You can also check out AEButton+. You have to pay for it, but it's pretty cheap. I got it last week, and have no idea why I didn't get it sooner. Haven't tried it on the newer com3 builds yet (still using com2), but I'm pretty sure it will close things. It isn't tied into the displaced 'X' button like a lot of task managers. You can close apps with a button push, and it also has a nice little task manager pop-up that you can also map to a button push (similar to the htc quick menu). You also get ~dozen more mappable button pushes on a fuze. It's really worth it, although I haven't tried a com3/4 6.5 build yet.
Newer WM6.5.1 builds such as 23071... clicking on the clock brings up the new drop down taskbar...
Running HTC Task Manager, you have to tap and hold, then release to get the task manager to shop up. Does Showcase experience this as well?
It seems to be with the new builds. I would assume Showcase would function the same.
Why don't you people just use inbuilt taskmanager.exe from Windows folder? I've configured it to open with long press "send" key (talk button), and it's working great.
I use aebutton and tie it to my Ok/Back key to close apps and it's working like a treat. that's the best way to really close apps I feel
i have a custom winmo 6.5 rom aslo, everything runs good on it, except the onscreen keyboard is useless now, all i can seem to enter are numbers only and i have messed with the input settings to see if that can correct it and so far to no avail or maybe im just one of the weird people who actualy use the onscreen compact qwerty i dunno.
Hey everyone? I've searched and searched, but I cannot find any app to assign an action like double-tapping the home or long-pressing the back button to launch an app like voice search. I thought I possibly found a way with tasker, but it didn't work. Anything you guys found for doing that? I came from the Atrix 2 where you could simply tap the search button to launch the voice command app of my choice (I preferred vlingo), but the One X, sadly, doesn't have that. It will be appreciated.
A third party launcher like Apex or Nova should do the trick if you have to have the home or right button long-press bring it up.
Even with Sense, if you install Nova (but keep Sense as the default launcher), you can add an icon to the homescreen which launches voice search which is close, but would not allow voice serach popup from within an app (but then again, just press home, the the voice search icon). When long-pressing home in sense, select shortcuts at the bottom, Activities (with the Nova icon), then Voice Search, Recognition Activity. I did the same with WidgetLocker and have voice-search from the lockscreen. I can now send text without unlocking (whoooohoooo) even with PIN secured.
jmaddr said:
A third party launcher like Apex or Nova should do the trick if you have to have the home or right button long-press bring it up. ...I can now send text without unlocking (whoooohoooo) even with PIN secured.
Click to expand...
Click to collapse
Really? I can't seem to make that work...
I added a voice search icon to my Sense dock so it shows up on the lock screen. When I activate it from lock, it's still prompting me to unlock the screen. What am I missing?
Viper rom. You can make the capacitive buttons do whatever you want in venom tweaks.
filthyfnj24 said:
Viper rom. You can make the capacitive buttons do whatever you want in venom tweaks.
Click to expand...
Click to collapse
Thank you for the tip! I installed Viper and it's awesome.
Unfortunately, the screen lock's still causing me trouble. I can select Google Voice Search, but it's still prompting for me to swipe my unlock pattern. (Same is actually happening with the camera -- which wasn't the case before I flashed Viper) I tried WidgetLocker, but it isn't letting that happen either.
It runs fine but if I hit the home button, it bypasses the lock screen and just goes to my home screen. The power button works, its just the home button issue. Can anyone share their settings for widget locker or let me know what I'm doing wrong.
Sent from my Nexus 7 using xda app-developers app
I've only been using Widget Locker for a couple of days but try this:
Go to the WidgetLocker app - Press the settings Icon on top right corner - Select Buttons & Inputs - Uncheck Allow Home Button.
See if that works.
I also have a question if anyone can help. How do I get Google now on the Jelly Bean Themed slider. I can get Google Now by setting the app in the unlock screen, but how do I make it look like the stock Google Now app?
Thanks
iPhoneSlayer said:
I've only been using Widget Locker for a couple of days but try this:
Go to the WidgetLocker app - Press the settings Icon on top right corner - Select Buttons & Inputs - Uncheck Allow Home Button.
See if that works.
I also have a question if anyone can help. How do I get Google now on the Jelly Bean Themed slider. I can get Google Now by setting the app in the unlock screen, but how do I make it look like the stock Google Now app?
Thanks
Click to expand...
Click to collapse
That worked thanks!
What's the jelly bean themed slider? If I can find it I can see if I can figure out your answer.
Sent from my Nexus 7 using xda app-developers app
tu3218 said:
That worked thanks!
What's the jelly bean themed slider? If I can find it I can see if I can figure out your answer.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Glad I could help.
The slider I talking about is the slider to unlock the phone. You can chose from a list of slider like honeycomb, ICS, Jellybean, Sense, etc. I want it to look like my N7 tablet where if I slide it up, it goes to Google Now. I can still get Google now by adding the shortcut to google search, but I want the icon to look like the stock look. It's kinda hard to explain, sorry.
iPhoneSlayer said:
Glad I could help.
The slider I talking about is the slider to unlock the phone. You can chose from a list of slider like honeycomb, ICS, Jellybean, Sense, etc. I want it to look like my N7 tablet where if I slide it up, it goes to Google Now. I can still get Google now by adding the shortcut to google search, but I want the icon to look like the stock look. It's kinda hard to explain, sorry.
Click to expand...
Click to collapse
Oh okay yeah. I'm using the JB slider now. Mine has the stock looking "Google" for Google now. It just doesn't have the circle around the word " Google". I can post picture if you want.
Sent from my Nexus 7 using xda app-developers app
tu3218 said:
Oh okay yeah. I'm using the JB slider now. Mine has the stock looking "Google" for Google now. It just doesn't have the circle around the word " Google". I can post picture if you want.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Nevermind, I'm dumb. I've been trying to add it as a shortcut, but I should have used WidgetLocker Actions to choose google. Now it's all good.
Thanks
Oh alright good.
Ugh its not working now. Can you go into advance an go to home helper. What do you have there? I think that's regarding the home button. Its weird. Its off an on with it working.
Sent from my SCH-I535 using xda app-developers app
tu3218 said:
Oh alright good.
Ugh its not working now. Can you go into advance an go to home helper. What do you have there? I think that's regarding the home button. Its weird. Its off an on with it working.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I think Home helper is for some launcher settings.
If you uncheck Allow Home Button under the Buttons and Inputs, then it should work, however it may be a bug that sometimes causes it not to work. I've noticed that widget locker acts weird if the phone is charging. I have only been using it for a few days so I'm sorry if I wasn't more helpful.
tu3218 said:
It runs fine but if I hit the home button, it bypasses the lock screen and just goes to my home screen. The power button works, its just the home button issue. Can anyone share their settings for widget locker or let me know what I'm doing wrong.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I had the same problem the other day. Particularly after I updated to 4.1.1. The lockscreen would unlock (once awake) by pressing home.
I solved it by using HomeHelper (widgetlocker settings -> advanced -> homehelper).
1) tick the "HomeHelper component" and choose "WL HomeHelper" as the default.
2) tap "HomeHelper's Launcher" and choose your default launcher (Touchwiz, Nova, AWG, Launcher Pro, etc.)
3) Make sure "HomeHelper Block Home" is checked.
4) (Optional) You can also choice "Block Home in other apps" to return to the lockscreen after opening apps from the notification bar or shortcuts.
HomeHelper worked fine for me, but I got the feeling it was slowing down my system a tiny bit. Most notably, the wallpaper would quickly blink every time I hit the home button (what is effectively happening is that the home button activates HomeHelper, that then activates the launcher). It was not a major deal but I personally found it annoying.
However, I may have stumbled upon the culprit behind all this: S-Voice. Once I upgraded to 4.1.1 I turned off the option to activate s-voice through pressing home twice (S-voice -> menu button -> Settings) because I was happy to use Google Now (aka Voice Search) instead. That is when I had the problem with widgetlocker's lock screen unlocking with the home button. After not liking HomeHelper's performance, I reluctantly went back to the default Touchwiz lockscreen (I maintained my custom launcher though, and reset the home button to default to it).
After Google Now failed embarrassingly to call the right people from my contacts list (most of whose names are foreign), I decided to go back to using S-voice. I reactivated the "press home twice" option. However, I still hated the "slide anywhere to unlock" Touchwiz lockscreen, as well as its inability to silence the ringer in one slide (you have to either hold the power button or open the notification bar first). So I went crawling back to widgetlocker for forgiveness. I activated widgetlocker (I did not meddle with the HomeHelper settings assuming those were already set), and later noticed that the lockscreen was not being unlocked with the home button, while the homescreen wallpaper was no longer blinking. I went into the homehelper settings and made sure it was turned off, and also made sure that the home button was by default linked to the custom launcher (not HomeHelper). I confirmed my theory by deactivating S-voice's double-press home option, and the problem above came back.
tl;dr. I theorize that the problem is caused by turning off S-Voice's quick-access option (double-press home). You can also use Widgetlocker's HomeHelper if you don't want to turn S-Voice back on. I hope my experience is not simply coincidence and someone could confirm this theory.
Found this thread because I was having basically the same problem. Widget locker's lock screen would be bypassed coming from sleep by single pressing home (power button from sleep continued to work normally). I could not fix this using any method mentioned here so far, except for enabling S Voice via double tapping home. I emailed the dev and hope it gets fixed, because I'd like to avoid the lag added to the home button by having double tap for S Voice enabled.
Anyone else have an alternate solution?
netter123 said:
Found this thread because I was having basically the same problem. Widget locker's lock screen would be bypassed coming from sleep by single pressing home (power button from sleep continued to work normally). I could not fix this using any method mentioned here so far, except for enabling S Voice via double tapping home. I emailed the dev and hope it gets fixed, because I'd like to avoid the lag added to the home button by having double tap for S Voice enabled.
Click to expand...
Click to collapse
Oddly enough this fixed it for me too. I had disabled S-Voice yesterday and today noticed that using the home button bypassed Widget locker. I re-enabled S-Voice and all is back to normal. Hopefully the dev will be able to give us an answer soon.
Agh ...I was so excited to get back to WidgetLocker I got used to from my pevious phone, only to find out this little anoying thing. Are there any news, some reply from the dev ?
So I am using widgetlocker, and my home button only wakes to my widgetlocker screen (never see the touchwiz lockscreen). I have s-voice/double-tap disabled.
In widgetlocker settings, under "advanced" I have root checker checked, homehelper component checked, "select system home" is widgetlocker, and "homehelper's launcher" is the launcher I use (nova in my case).
Does that not fix the problem for you all?
(On CleanRom 5.6)
Sent from my SCH-I535 using Xparent BlueTapatalk 2
Does your launcher blink every time you press home button while in the launcher itself ? If yes, then you know why it does not work for us.
JustSomeDude said:
So I am using widgetlocker, and my home button only wakes to my widgetlocker screen (never see the touchwiz lockscreen). I have s-voice/double-tap disabled.
In widgetlocker settings, under "advanced" I have root checker checked, homehelper component checked, "select system home" is widgetlocker, and "homehelper's launcher" is the launcher I use (nova in my case).
Does that not fix the problem for you all?
(On CleanRom 5.6)
Sent from my SCH-I535 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
No, these settings don't solve the problem for me. I messed with various combinations of the settings your talking about as well, but no matter what I still bypass the lock screen (and also experience a quick blink every time home is pressed, which would be a secondary concern). I'm also on the latest Cleanrom and use Nova.
netter123 said:
No, these settings don't solve the problem for me. I messed with various combinations of the settings your talking about as well, but no matter what I still bypass the lock screen (and also experience a quick blink every time home is pressed, which would be a secondary concern). I'm also on the latest Cleanrom and use Nova.
Click to expand...
Click to collapse
Hmm, strange... One more setting I have: do you also have "appear on boot" checked under Behavior? Otherwise I'm stumped as to why it works for me and not you.
As for the quick blink, yeah, I have that too - I assume from widgetlocker being assigned as home, thus registering that before going to nova - but I hit home so rarely that I barely notice it.
Sent from my SCH-I535 using Xparent BlueTapatalk 2
JustSomeDude said:
Hmm, strange... One more setting I have: do you also have "appear on boot" checked under Behavior? Otherwise I'm stumped as to why it works for me and not you.
As for the quick blink, yeah, I have that too - I assume from widgetlocker being assigned as home, thus registering that before going to nova - but I hit home so rarely that I barely notice it.
Sent from my SCH-I535 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Yeah have that checked too. Must be some setting slightly different somewhere though. Not that big of a deal, I've just been living with the slight lag on home press and sounds like otherwise I'd have to get used to the quick blink.
Btw never got a response from the developer so that's kind of disappointing..
It's working for me but I get the annoying flicker when hitting the home button as well. It's a drag for sure. Go Launcher is my launcher. Shoulda did my homework before paying for this one. Love what the lockscreen can do but has issues with the home button for sure
Dothgar said:
I had the same problem the other day. Particularly after I updated to 4.1.1. The lockscreen would unlock (once awake) by pressing home.
I solved it by using HomeHelper (widgetlocker settings -> advanced -> homehelper).
1) tick the "HomeHelper component" and choose "WL HomeHelper" as the default.
2) tap "HomeHelper's Launcher" and choose your default launcher (Touchwiz, Nova, AWG, Launcher Pro, etc.)
3) Make sure "HomeHelper Block Home" is checked.
4) (Optional) You can also choice "Block Home in other apps" to return to the lockscreen after opening apps from the notification bar or shortcuts.
HomeHelper worked fine for me, but I got the feeling it was slowing down my system a tiny bit. Most notably, the wallpaper would quickly blink every time I hit the home button (what is effectively happening is that the home button activates HomeHelper, that then activates the launcher). It was not a major deal but I personally found it annoying.
However, I may have stumbled upon the culprit behind all this: S-Voice. Once I upgraded to 4.1.1 I turned off the option to activate s-voice through pressing home twice (S-voice -> menu button -> Settings) because I was happy to use Google Now (aka Voice Search) instead. That is when I had the problem with widgetlocker's lock screen unlocking with the home button. After not liking HomeHelper's performance, I reluctantly went back to the default Touchwiz lockscreen (I maintained my custom launcher though, and reset the home button to default to it).
After Google Now failed embarrassingly to call the right people from my contacts list (most of whose names are foreign), I decided to go back to using S-voice. I reactivated the "press home twice" option. However, I still hated the "slide anywhere to unlock" Touchwiz lockscreen, as well as its inability to silence the ringer in one slide (you have to either hold the power button or open the notification bar first). So I went crawling back to widgetlocker for forgiveness. I activated widgetlocker (I did not meddle with the HomeHelper settings assuming those were already set), and later noticed that the lockscreen was not being unlocked with the home button, while the homescreen wallpaper was no longer blinking. I went into the homehelper settings and made sure it was turned off, and also made sure that the home button was by default linked to the custom launcher (not HomeHelper). I confirmed my theory by deactivating S-voice's double-press home option, and the problem above came back.
tl;dr. I theorize that the problem is caused by turning off S-Voice's quick-access option (double-press home). You can also use Widgetlocker's HomeHelper if you don't want to turn S-Voice back on. I hope my experience is not simply coincidence and someone could confirm this theory.
Click to expand...
Click to collapse
Thank you. It is what i want
Looking to see if there is any ability to get the right capacitive key to do anything other than switch/clear open apps? I sure do miss being able to hit the right key on my old phone and it would typically bring up menu options for whatever app you happened to be in and also a shortcut into your settings when on one of the home screens. What a PITA having to go up to the top right side of each app, hit the 3 little menu dots and change menu options that way.
Anybody figure any work-arounds or other 3rd party apps that can help out with this?
It would be nice if Alcatel would allow the right capacitive key to access the settings or menu of an app with a long hold of the button. Short hold of the button accesses the open apps. That would be intuitive. My old phone was the opposite, a short tap would open a backdoor to menu options and a long hold would open the active apps for dismissal or switch.
Very much an extra effort reaching up to the right when in Chrome to have to go to your bookmarks...that's just one example.
Any 3rd party launchers include something of this ability?
Also a PITA having to reach allllllll the way up to the top of the phone to pull down the notification panel. My old phone with KK 4.4.4 all you had to do was slide down anywhere on the home screen and the notification panel would come down. Vice versa, sliding up on a home screen would open the backdoor to your settings menu.
These are my two biggest *****es 24 hours into having this phone. Everything else I've tried so far seems pretty good.
I can propose solutions to two of your problems ..
(a) For bookmarks, could a bookmark widget help ? I believe Chrome has its own , but you could also use the stock widget and have it open any browser. Of course this only works in you are not already inside the browser. You can also try a browser with gestures. I think dolphin can do that.
(b) For the notification shade, you can use a launcher than offers a swipe down gesture. I use Apex which has gestures for free, and I have swipe down set for the notification shade.
Cool, thanks! Hopefully Alcatel is taking notes for future updates?
Did your phone have a custom room or Launcher? Those are not standard gestures for kit kat or stick Launcher.
Sent from my Alcatel OneTouch Idol 3 using Tapatalk
Not sure if this is where my question is supposed to go, I just joined. I'm having a minor frustration with my keyboard, because it won't go down when I want it to. What prompted me to create a thread for this: posting an Instagram story, pressing the back button so the keyboard will go away so I can select a text color... except, the text color options go away too when I press the back button. There's other instances where this has been annoying, that's just one example. On my browser, it'll go away if I scroll, but obviously not in all apps. :/
Main summary: My Sony Xperia z3 is rooted and I'm wondering if there's a tweak I can do, or a module to install, to make Gboard go away whenever I want it to. Swipe? Pressing the camera button? (It's unmapped, I originally wanted it to take screenshots but I can't seem to get that working with tasker or modules....) Pulling notification shade down? Possible to make any of those options close the keyboard?? I don't want to change keyboards so please don't suggest that, it's a modded version I'm using after installing iOS styled emojis.
Edit. Setting up tasker to switch my input method to null keyboard when I cover proximity sensor before switching back after 5 seconds allows me to do what I need to in Instagram, but this 'solution' is annoying and messy at best. Any better suggestions?
*null*
Bump please help