Related
Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.
1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!
I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!
Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.
You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!
David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin
So because I'm on a mac, i've gotta work 3 times as hard to get anything done..
but now with paralells running, things might get easier.
i tried to get my phone (froyo) onto gingerbread.. and it was working but glitchy.. then it stopped altogether.. i figured out the only way to get it unbricked was to go back to what it was originally via odin.
I'd like to get back to gb and check out all the roms, but dont want to waste more time..
so what i want to know is:
1. Custom roms are to be installed either (as in only) Odin or CWM?
2. If the Rom is GB, can it be installed on a phone thats running on Froyo (and vice versa)?
3. If #2 is true, I have to install GB before I do anything...?
4. Can I install GB it via Odin?
so before anyone jumps down my throat, A THOUSAND APOLOGIES for THIS NOOBISH BEHAVIOUR!!!
ok..
thanks!
umlaaat said:
So because I'm on a mac, i've gotta work 3 times as hard to get anything done..
but now with paralells running, things might get easier.
i tried to get my phone (froyo) onto gingerbread.. and it was working but glitchy.. then it stopped altogether.. i figured out the only way to get it unbricked was to go back to what it was originally via odin.
I'd like to get back to gb and check out all the roms, but dont want to waste more time..
so what i want to know is:
1. Custom roms are to be installed either (as in only) Odin or CWM?
2. If the Rom is GB, can it be installed on a phone thats running on Froyo (and vice versa)?
3. If #2 is true, I have to install GB before I do anything...?
4. Can I install GB it via Odin?
so before anyone jumps down my throat, A THOUSAND APOLOGIES for THIS NOOBISH BEHAVIOUR!!!
ok..
thanks!
Click to expand...
Click to collapse
Go to this thread :
http://forum.xda-developers.com/showthread.php?p=16762954
follow the directions exactly, then I would suggest flashing Valhalla Final Rom by Whitehawx. IMO it is the best for the SGS4G by far. Good luck.
umlaaat said:
So because I'm on a mac, i've gotta work 3 times as hard to get anything done..
but now with paralells running, things might get easier.
i tried to get my phone (froyo) onto gingerbread.. and it was working but glitchy.. then it stopped altogether.. i figured out the only way to get it unbricked was to go back to what it was originally via odin.
I'd like to get back to gb and check out all the roms, but dont want to waste more time..
so what i want to know is:
1. Custom roms are to be installed either (as in only) Odin or CWM?
2. If the Rom is GB, can it be installed on a phone thats running on Froyo (and vice versa)?
3. If #2 is true, I have to install GB before I do anything...?
4. Can I install GB it via Odin?
so before anyone jumps down my throat, A THOUSAND APOLOGIES for THIS NOOBISH BEHAVIOUR!!!
ok..
thanks!
Click to expand...
Click to collapse
If it were me I'd use the 1-click method
http://forum.xda-developers.com/showthread.php?p=19601787
There is a Mac version of that program.
Sent from my SGH-T959V using xda premium
umlaaat said:
1. Custom roms are to be installed either (as in only) Odin or CWM?
Click to expand...
Click to collapse
No. Custom ROMs can also be installed via Heimdall.
umlaaat said:
2. If the Rom is GB, can it be installed on a phone thats running on Froyo (and vice versa)?
Click to expand...
Click to collapse
Yes, it can. The catch is that the ROM you install must have the proper GB boot loaders, else you'll end up with the "rainbow" screen or boot looping. Ditto for downgrading from GB to Froyo; you want to make sure the ROM has the right boot loaders.
umlaaat said:
3. If #2 is true, I have to install GB before I do anything...?
Click to expand...
Click to collapse
Not necessarily, but possibly. If your custom ROM has the right boot loaders (only important when going from Froyo to GB and the other way around - going from one GB ROM to another doesn't matter) then you don't need to flash a stock GB ROM first. I'm a fan of flashing stock, wiping all of the caches (cache partition and Davlik cache), then flashing a custom ROM. That might be extraneous but I feel it gives me a cleaner slate from which to start.
umlaaat said:
4. Can I install GB it via Odin?
Click to expand...
Click to collapse
Surely, as long as it has the right boot loaders or if you're already on GB.
umlaaat said:
so before anyone jumps down my throat, A THOUSAND APOLOGIES for THIS NOOBISH BEHAVIOUR!!!
Click to expand...
Click to collapse
Nah, no jumping down your throat. Your questions are quite valid.
umlaaat said:
thanks!
Click to expand...
Click to collapse
Quite welcome. Like one of the other posters said, the one-click methods are great for flashing. They utilize Heimdall, which is an open-source alternative to ODIN. They also only require you have Java installed to use them as they come packaged with Heimdall. Heimdall is cross-platform and is available for Windows, MAC, and Linux.
Best of luck.
well let me just say this before someone decides to flame you. I haven't seen any "CUSTOM" rom for our device that requires heimdall to flash. all are flashed via CwM.
to the op, I highly suggest using the search feature before posting. read the bible thread and also the starter for flashing from froyo to gingerbread or the one click method for kj6.
and trust me when I say this, once you go to gingerbread, you most likely won't wanna go back to froyo. since this device received the OTA for gingerbread, most of the issues we had with the leaks are gone. just my 2 cents worth though.
sent from within pure darkness.
droidmyst said:
well let me just say this before someone decides to flame you. I haven't seen any "CUSTOM" rom for our device that requires heimdall to flash. all are flashed via CwM.
to the op, I highly suggest using the search feature before posting. read the bible thread and also the starter for flashing from froyo to gingerbread or the one click method for kj6.
and trust me when I say this, once you go to gingerbread, you most likely won't wanna go back to froyo. since this device received the OTA for gingerbread, most of the issues we had with the leaks are gone. just my 2 cents worth though.
sent from within pure darkness.
Click to expand...
Click to collapse
Depends on your definition of custom, I guess. Custom to me is non-stock, not necessarily tweaked for performance or anything. Bryan's one-clicks are custom ROMs, as they have modded kernels, cwm, root, etc.
I'm a Mac. I have OS X Lion. I do everything from that.
stephen_w said:
No. Custom ROMs can also be installed via Heimdall.
Yes, it can. The catch is that the ROM you install must have the proper GB boot loaders, else you'll end up with the "rainbow" screen or boot looping. Ditto for downgrading from GB to Froyo; you want to make sure the ROM has the right boot loaders.
Not necessarily, but possibly. If your custom ROM has the right boot loaders (only important when going from Froyo to GB and the other way around - going from one GB ROM to another doesn't matter) then you don't need to flash a stock GB ROM first. I'm a fan of flashing stock, wiping all of the caches (cache partition and Davlik cache), then flashing a custom ROM. That might be extraneous but I feel it gives me a cleaner slate from which to start.
Surely, as long as it has the right boot loaders or if you're already on GB.
Nah, no jumping down your throat. Your questions are quite valid.
Quite welcome. Like one of the other posters said, the one-click methods are great for flashing. They utilize Heimdall, which is an open-source alternative to ODIN. They also only require you have Java installed to use them as they come packaged with Heimdall. Heimdall is cross-platform and is available for Windows, MAC, and Linux.
Best of luck.
Click to expand...
Click to collapse
firstly, you guys f-ing rock..
ok. so the problems i had yesterday were due to Heimdall. The GUI is def easier and better looking but for some reason could not load the PIT file. If you were to flash without bootloaders, it would be ok (though only after a while), and even then only for the first flash..
And it did work the first time because I trashed the .kext in the system>ext folder.
Outside of being able to go into download mode, my phone was completely bricked.. nada. just the 4 lights (for the icons) would light.
So after HOURS of trying to google what the hell is a PIT file and how can i get Heimdall to install, I got ODIN to work on Parallels.
THIS unbricked my phone and i am now back to where I started.
I am PETRIFIED of this happening again but still want to go custom ROM...
So, in my limited experience with all things Android, I've found:
I can only flash with Heimdall if bootloaders box is unchecked
This is what "About Phone" says:
firmware: 2.2.1
Kernel: 2.6.32.9
Build: FROYO.VUVKD1
1. Can I install GB with ODIN?
2. Whats the difference btw using ODIN and Heimdall?
3. Are odin, heimdall and clockwork mod the same thing (ie they are all used to flash roms)?
4. Just to be on the safe side, i should install GB first before flashing any ROMS otherwise i go into "Rainbow Brite" mode?
5. Once i goto GB and once the phone is rooted, I'm pretty much good to go as far as flashing different ROMs?
6. Is the difference btw FROYO and GB the same as Windows XP and 2000 (OS 10.3 vs. 10.6 for my Mac ppl)?
btw, I'm asking these question bc i got HAMMERED (not in the alcoholic sense but like i've been beaten up by 4 large men) last night and was up till 6 trying to unbrick my ish... And YES I googled the HELL out of this site and the internet at large for these answers.. keep in mind there are like 144 pages per thread topic and maybe 3 posts are MAC related.
thanks and once again you guys f-ing ROCK!
umlaaat said:
firstly, you guys f-ing rock..
ok. so the problems i had yesterday were due to Heimdall. The GUI is def easier and better looking but for some reason could not load the PIT file. If you were to flash without bootloaders, it would be ok (though only after a while), and even then only for the first flash..
And it did work the first time because I trashed the .kext in the system>ext folder.
Outside of being able to go into download mode, my phone was completely bricked.. nada. just the 4 lights (for the icons) would light.
So after HOURS of trying to google what the hell is a PIT file and how can i get Heimdall to install, I got ODIN to work on Parallels.
THIS unbricked my phone and i am now back to where I started.
I am PETRIFIED of this happening again but still want to go custom ROM...
So, in my limited experience with all things Android, I've found:
I can only flash with Heimdall if bootloaders box is unchecked
This is what "About Phone" says:
firmware: 2.2.1
Kernel: 2.6.32.9
Build: FROYO.VUVKD1
1. Can I install GB with ODIN?
2. Whats the difference btw using ODIN and Heimdall?
3. Are odin, heimdall and clockwork mod the same thing (ie they are all used to flash roms)?
4. Just to be on the safe side, i should install GB first before flashing any ROMS otherwise i go into "Rainbow Brite" mode?
5. Once i goto GB and once the phone is rooted, I'm pretty much good to go as far as flashing different ROMs?
6. Is the difference btw FROYO and GB the same as Windows XP and 2000 (OS 10.3 vs. 10.6 for my Mac ppl)?
btw, I'm asking these question bc i got HAMMERED (not in the alcoholic sense but like i've been beaten up by 4 large men) last night and was up till 6 trying to unbrick my ish... And YES I googled the HELL out of this site and the internet at large for these answers.. keep in mind there are like 144 pages per thread topic and maybe 3 posts are MAC related.
thanks and once again you guys f-ing ROCK!
Click to expand...
Click to collapse
The best advice I can give you is to use the GB Ext4 Starter Pack I mentioned in a earlier post. It will provide you everything you need to upgrade to Gingerbread. If you follow the directions in that thread you can't go wrong. Also as I said in my earlier post, if you want a Rom that is bug free and that everything works fine try Valhalla Final. Ive tried most of the GB Roms but I always wind up going back to it. No offence to the other Devs.
umlaaat said:
1. Can I install GB with ODIN?
2. Whats the difference btw using ODIN and Heimdall?
3. Are odin, heimdall and clockwork mod the same thing (ie they are all used to flash roms)?
4. Just to be on the safe side, i should install GB first before flashing any ROMS otherwise i go into "Rainbow Brite" mode?
5. Once i goto GB and once the phone is rooted, I'm pretty much good to go as far as flashing different ROMs?
6. Is the difference btw FROYO and GB the same as Windows XP and 2000 (OS 10.3 vs. 10.6 for my Mac ppl)?
Click to expand...
Click to collapse
1. Yes. although personally I would still use heimdall even if you have to run a parallel
2. Personal preference. I find heimdall easier. I give my other opinions on the subject in my guide. reference post 2.
3. in the sense you are asking yes.
4. You should ensure froyo boot loaders for froyo ROMs and GB boot loaders for GB ROMs. We have both.
5. you can flash a ROM via heimdall or Odin no matter the state of your device as long as you can bout to download mode. To flash with cwm you must have cwm recovery installed. In the case of this device it it's included in custom kernels.
6. Although this is not entirely true, for most that is a good comparison yes.
Sent from my SGH-T959V using XDA App
Bassmanjames said:
1. Yes. although personally I would still use heimdall even if you have to run a parallel
2. Personal preference. I find heimdall easier. I give my other opinions on the subject in my guide. reference post 2.
3. in the sense you are asking yes.
4. You should ensure froyo boot loaders for froyo ROMs and GB boot loaders for GB ROMs. We have both.
5. you can flash a ROM via heimdall or Odin no matter the state of your device as long as you can bout to download mode. To flash with cwm you must have cwm recovery installed. In the case of this device it it's included in custom kernels.
6. Although this is not entirely true, for most that is a good comparison yes.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
ok. so i'm downloading heimdall suite 1.3.1 for WINDOWS (dear god...) and will follow its rather extremely long and convoluted directions...
but hold on.. I was reading the directions for Valhalla Final and it says you must have pre installed kernel with clockwork recovery.. does Heimdall have/do this?
If so, I guess (according to the instructions) I can just reboot back into clockwork recovery...
Please correct if i'm wrong:
To flash via Heimdall or ODIN you have to use a Mac/PC. To flash via CWM, you just have to restart via recovery mode and CWM does the rest?
Heimdall 1.3.1 (the file you download from http://www.glassechidna.com.au/products/heimdall/) is an application that installs the DRIVERS into your phone so that you can flash custom ROMS?
Does Heimdall install GB or FROYO bootloaders? - How can you tell?
Is bootloaders the same as drivers?
The terminology is confusing, and (i think) i'm starting to understand:
In the Heindall instructions, it says "If the ROM is not a Heimdall Firmware Package it may instead be provided as multiple archives"
So "Heimdall Firmware Packages" is the same thing as a Custom ROM?
Once again thanks!!!
umlaaat said:
ok. so i'm downloading heimdall suite 1.3.1 for WINDOWS (dear god...) and will follow its rather extremely long and convoluted directions...
but hold on.. I was reading the directions for Valhalla Final and it says you must have pre installed kernel with clockwork recovery.. does Heimdall have/do this?
If so, I guess (according to the instructions) I can just reboot back into clockwork recovery...
Please correct if i'm wrong:
To flash via Heimdall or ODIN you have to use a Mac/PC. To flash via CWM, you just have to restart via recovery mode and CWM does the rest?
Heimdall 1.3.1 (the file you download from http://www.glassechidna.com.au/products/heimdall/) is an application that installs the DRIVERS into your phone so that you can flash custom ROMS?
Does Heimdall install GB or FROYO bootloaders? - How can you tell?
Is bootloaders the same as drivers?
The terminology is confusing, and (i think) i'm starting to understand:
In the Heindall instructions, it says "If the ROM is not a Heimdall Firmware Package it may instead be provided as multiple archives"
So "Heimdall Firmware Packages" is the same thing as a Custom ROM?
Once again thanks!!!
Click to expand...
Click to collapse
The one click setup is pre programmed to flash as the packager intended. Heimdall front end can be difficult to learn. Use the kj6 beta 2d file as I recommended before (cwm included). It looks like you understand the rest. Sad to see this be so difficult for Mac users
Btw not aimed at you directly
Sent from my SGH-T959V using XDA App
Bassmanjames said:
The one click setup is pre programmed to flash as the packager intended. Heimdall front end can be difficult to learn. Use the kj6 beta 2d file as I recommended before (cwm included). It looks like you understand the rest. Sad to see this be so difficult for Mac users
Btw not aimed at you directly
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
ok. so I will use the kj6 beta 2d file (that i download thru Heimdall) but the WINDOWS version.
I will then download a custom ROM (onto the parallels window)
and then flash it thru Heimdall
then it will work.
right?
omg.. wait a second..
so do i have to flash the kj6 beta 2d file via heimdall 1.3.1??
Is kj6 beta 2d file a ROM?
Because I've been trying to open this and use THIS as the app to flash a ROM that I found looks cool..
If so, why do I need to flash with kj6 beta 2d file first?
wow.. ok
so whenever I try to load a ROM via Heimdall frontend, I get "Tar header contained an invalid file size"...
!!!!!!!!!!!!
umlaaat said:
wow.. ok
so whenever I try to load a ROM via Heimdall frontend, I get "Tar header contained an invalid file size"...
!!!!!!!!!!!!
Click to expand...
Click to collapse
You're trying to load a .jar file into heimdall. The .jar files are "executables" that open with java. If you read the op for the one-click file you're most likely trying to use you'll get instructions as to how to make it work.
Basically you need to install java. Google "download java" and install it onto windows then you can run the one click file on windows.
FBis251 said:
You're trying to load a .jar file into heimdall. The .jar files are "executables" that open with java. If you read the op for the one-click file you're most likely trying to use you'll get instructions as to how to make it work.
Basically you need to install java. Google "download java" and install it onto windows then you can run the one click file on windows.
Click to expand...
Click to collapse
no, same thing. I loaded heimdall frontend, clicked on "heimdall firmware package" selected, first: "SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click" got the same Tar error message, then selected "sgs4g-OfficalGB2.3.6-NOCIQ-Octane v3.0" (another ROM i downloaded) - same Tar error message.
Googled and found JAVA, installed it, cant verify that I have it because I have to configure the net to with my version of windows (thru parallels), but when i tried installing it again, it said it was already installed so i'm guessing its working.
Rebooted, tried the whole process again, same damn thing,
Tried ODIN (I'm using ODIN3 1.85), and clicked on PDA, selected a ROM, some activity, but then nothing happens... Theres nothing in the ID:COM column, auto reboot and f. reset time is CHECKED
If it makes any difference i'm on Windows XP Pro SP3
umlaaat said:
no, same thing. I loaded heimdall frontend, clicked on "heimdall firmware package" selected, first: "SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click" got the same Tar error message, then selected "sgs4g-OfficalGB2.3.6-NOCIQ-Octane v3.0" (another ROM i downloaded) - same Tar error message.
Googled and found JAVA, installed it, cant verify that I have it because I have to configure the net to with my version of windows (thru parallels), but when i tried installing it again, it said it was already installed so i'm guessing its working.
Rebooted, tried the whole process again, same damn thing,
Tried ODIN (I'm using ODIN3 1.85), and clicked on PDA, selected a ROM, some activity, but then nothing happens... Theres nothing in the ID:COM column, auto reboot and f. reset time is CHECKED
If it makes any difference i'm on Windows XP Pro SP3
Click to expand...
Click to collapse
Dude it's the same as the first time you flashed it. Exit heimdall front end! run the file (beta 2d) you downloaded. flash, leave the one click open, reboot to download mode flash again with boot loaders box check. Enjoy ginger bread stock with root and cwm recovery.
Be respectful
Always click thanks
Post logs not complaints
Don't know the mac side of this... but after reading the thread I haven't seen anybody clearly say...
Flash the custom rom with CWM after you do what james just said.
You need to get gb with CWM through Heimdall first and only (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click).
After you successfully do that forget Heimdall, have whatever custom rom you want on root of your sd card, reboot into cwm recovery and install custom rom along with whatever other instructions the op of the custom rom states (i.e. clear cache, mounts, etc).
Add: And no beta kj6 beta 2d isn't a rom. It is a kernal. The kj6 beta 2d is the custom kernal that gives you CWM to flash the custom roms. "SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click" is a rom with the kj6 beta 2d kernal.
Sent from my SGH-T959V
Your Help
Heimdall or ODIN are programs used to flash Samsung made roms that have 6 basic files. Kernel(zImage), /System(Factoryfs.rfs), /data(data.rfs), Modem(Modem.bin), Primary Bootloader(boot.bin), and Secondary Bootloader(sbl.bin).
Custom roms are made by us. We take their files, hack and mod them to our liking, add root(the ability to change the system while using the phone), and flash them.
In order to flash the custom roms, we either repack the modded files into the factoryfs.rfs to flash via ODIN or Heimdall, or we do the easy one we flash via CWM which doesn't need a computer.
CWM is a type of android recovery. Recovery is used for stock android (AOSP) phones to be given updates. Samsung doesn't do so, they make us use Kies. The reason samsung still has recovery is because android requires it for booting, also if you need to wipe data or etc. Recovery is the only way to do so.
The purpose of CWM is tor replace the stock recovery with one that can flash custom made zip files that aren't signed by Samsung, as well as do additional features.
The android recovery on this device is embedded into the kernel. That is why CWM requires us to flash a different kernel.
I hope you learn from this.
ok so long story short i tried to flash my samsung infuse 4g with a rom from this website (ROM][Jellybean] CNA 3.5.0 for Samsung Infuse [PORT] ) i used to have froyo 2.2. all was well and then my phone just stopped working and wouldnt pass boot screen. but i saved my old rom's data with clockworkmod on my sd card. the thing is there are like 5 .tar files and i want to know if i can recover my old rom using odin since i cant even get passed the boot screen??? pls someone help me i'm freaking out, ive been googleing all night and i'm totally burnt out. the files i have are .android_secure.vfat.tar, cache.rfs.tar, data.rfs.tar, efs.rfs.tar, nandroid.md5 and system.rfs.tar...... pls someone show me how to fix my phone
thanks in advance
Don't think you can flash those files, but you should be able to go back to stock.
Sent from my sweet & buttery Infuse
Follow these instructions. I would use the zip that takes you back to stock with root.
Keep one thing in mind.....you CANNOT go from Froyo to JB.
http://forum.xda-developers.com/showthread.php?p=27286083#post27286083
I keep this thread bookmarked. I have soft bricked my phone so many times, it's not funny!!!
http://forum.xda-developers.com/showthread.php?t=1700416
Lack of reading/research caused your error :/
Anyways go back to stock with heimdall.or Odin, get red cwm again and you should be able to restore your backups
If you want to go to jb in the future....then you must first follow go to ics, then jb...you have to have ics before you can flash gb
Sent from my HTC PH39100 using Tapatalk 2
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
marielacvn said:
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
Click to expand...
Click to collapse
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Shawn said:
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
okay i think i understand....never has my phone disconnected during a flash with odin, ive always gotten a straight pass...exactly how important are the bootloaders anyways? if failures happen b/c of faulty usb cords, then im good...if bricking happens b/c of "unlucky chance" then id rather avoid it.... either way ill start the whole process tonight after i put the kiddos away so i can concentrate 100%.
thanks again for the tips
dparrothead1 said:
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Click to expand...
Click to collapse
okay, ill take ur advice and use option c. froyo to gb using odin and possibly bootloaders, then from gb to ics, ics to jb using cwm
wish me luck!
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Shawn said:
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
so far so good, it seems i need to do the gb bootloader after all...got the rainbow screen....i have my gbbootloader file ready to go....only thing is i want to confirm where i put the file, i've searched and i can only find a procedure for heimdall not odin...do i put the md5 file in PDA or bootloaders?? also it says in heimdall to tick bootloaders, do i do the same in odin??? it also says to flash twice....?? ok im really not risking a hard brick, i'll be patient and wait
http://forum.xda-developers.com/showthread.php?t=1878458
i'll wait for your answer before i proceed....after this i'll continue to flash ics and then jb...
btw, am i supposed to flash ics twice?? that's what the [GUIDE] How To Flash JB says,
"9. Flash ICS Rom, then ICS Gapps"
but when i tried to flash ics a second time i couldn't (because of rainbow screen, and because it didn't show up in my directory....and where does ICS Gapps show up?
thanks again
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Edit: to fully install ics you must flash twice, because I believe that what it does when coming from GB is that it just flashes the ics kernel on the first flash, requiring you to run it a second time after rebooting for it to install the complete rom.
Ics gapps are often linked in the rom OPs, although you don't need to flash them if you are headed to JB.
Sent from my sweet & buttery Infuse
andros11 said:
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
That's odd, I flashed GB bootloaders in Odin from a rooted stock GB. But andros is right about going in the PDA slot. Maybe its just me that didn't have to flash with heimdall first.
Sent from my JellyBeaned Infuse, unofficial cm10
Shawn what I meant is that heimdall one-click wont allow you to flash bootloaders the 1st time, so you must run it once and then a 2nd time but with "flash bootloaders" ticked on.
There's no need to use heimdall before flashing them with Odin.
Sent from my sweet & buttery Infuse
Oh, I see what you mean. My mistake.
Sent from my JellyBeaned Infuse, unofficial cm10
Alright guys, I'm officially a jelly beaner!! Thanks again to all who replied and helped me out, couldn't have done it without your help everything seems to we working fine (with the exception of a few apps that aren't compatible, but they weren't that important ) only issue I have now is that I can't use my data plan and surf the web I configured everything just as I had it before according to my carrier and nothing ...... could it have something to do with the change in modem? When I scan for available network operators I get two options one says :NICMS and the other is just a number 71021... any ideas?
Also, when installing jb in the initial setup it asked which would be the defualt location to save I think I chose the sdcard instead of the emmc directory. ..can I change that setting?
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Shawn said:
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Click to expand...
Click to collapse
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
marielacvn said:
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
Click to expand...
Click to collapse
It probably won't but you never know.
how is [ROM][JellyBean][4.1.1]Unofficial CM10 - Updated CM10 9/14 Butter - MTD - OC Kernel working out? since ive gotten cna nightly my camera and video are extremly buggy, more than id like...what works and doesnt work in unofficial cm10
guys this is 4th day :angel:and i m trying to fix sgs4g t959v.......i downloaded a lot of roms but no one will go beyond boot screen except froyo kd1.....but in froyo after successfull boot it freezes very quickly and reboots...........i m very annoyed now and want someone to share his expertise......thank you in advance:good:
yes it always go into download mode easily and sometimes into recovery but freezes very soon...............
Hi
1. Please update your thread topic, no one will help an empty topicless [Q].
2. Go here and follow instructions. This will bring you to Gingerbread (with GB bootloaders) and from there it will be very easy to upgrade.
3. Once you have a rooted GB ROM with CWM recovery 3 and above, you will be able to flash an MTD ICS ROM such as CM9/MIUI/Ultragen and then JB...
already tried that
itzik2sh said:
Hi
1. Please update your thread topic, no one will help an empty topicless [Q].
2. Go here and follow instructions. This will bring you to Gingerbread (with GB bootloaders) and from there it will be very easy to upgrade.
3. Once you have a rooted GB ROM with CWM recovery 3 and above, you will be able to flash an MTD ICS ROM such as CM9/MIUI/Ultragen and then JB...
Click to expand...
Click to collapse
bro i already tried that......upgraded with kies mini and kies said upgrade is successful but it did not go beyond boot screen
If you used kies mini you did not try that at all.
uninstall all Samsung drivers and actually try that.
itzik2sh said:
If you used kies mini you did not try that at all.
uninstall all Samsung drivers and actually try that.
Click to expand...
Click to collapse
the link you provided said first upgrade from stock froyo to stoc gb, then onwards....i did so......everything went fine but didnt boot
I think if you have the kies drivers installed you should try using gremlin remover.
dervash said:
the link you provided said first upgrade from stock froyo to stoc gb, then onwards....i did so......everything went fine but didnt boot
Click to expand...
Click to collapse
No. You need to read better. The link I sent allows you to upgrade to GB without kies and then further on. Now what you can do is uninstall kies and any other Samsung driver from PC, switch USB port and use heimdall to flash to rooted GB. From there zip flash ICS and then JB...
If you say you don't have boot you probably don't have bootloaders. Please follow instructions and read them well.
sent from me
Did you do the factory reset between?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
champ1919 said:
Did you do the factory reset between?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Click to expand...
Click to collapse
nothing comes beyond boot screen.......how can i do a factory reset.....the one stock rom kd1 i m able to boot but it freezez after seconds.......let me try
i managed to do a factory reset but to no avail
You might be getting confused. Please go back to the link provided by itzik2sh and study the guide on using Heimdall. It's fairly lengthy but completely accurate. It will show you how to use Heimdall to get to stock GB, how to use Heimdall to root your phone by flashing AntonX's kernel, how to flash the necessary bootloaders, and even how to get your device into download mode. It's pretty much foolproof...and it works...please do your homework...we will be grading you.
DickyG said:
You might be getting confused. Please go back to the link provided by itzik2sh and study the guide on using Heimdall. It's fairly lengthy but completely accurate. It will show you how to use Heimdall to get to stock GB, how to use Heimdall to root your phone by flashing AntonX's kernel, how to flash the necessary bootloaders, and even how to get your device into download mode. It's pretty much foolproof...and it works...please do your homework...we will be grading you.
Click to expand...
Click to collapse
bro i did all heimdall one clicks...stock kj6, stock+root, stock kf1..,,but nothing happened........the only thing worked is i downloaded this starter pack http://forum.xda-developers.com/showthread.php?t=1223765 and installed both but nothing happened...then again i flashed first which is kc1 with pit file then i flashed stock froyo rom downloaded from sammobile.....it boots up but suddenly freezes after 20 or so seconds......i erased to factory but the result was same.......then i flashed bali 3.03 kernel and booted to cwm recovery and tried to flash icbinb.....as required i flashed ext4 converter then immediately as i try to flash icbinb....recovery freezes randomly.....and i m unable to complete process.......may be it has some hardware issue
One final thought...looks like you've tried kies, Odin, & Heimdall. There is the possibility that you might have some conflicting drivers wandering around your computer. Why don't you try another computer (if one's available). Run Heimdall...be sure to follow the instructions on verifying your Java version and Microsoft Visual C. If you are successful, be sure and flash the bootloaders and then the basic-with-a-twist kernel.
Hope this works...I'm out of ideas.
i did so.....but no difference......i think it has some hardware problem.....because even if i m in recovery....it freezes after some tine....be it stock recovery or cwm......also i mentioned earlier that only rom which i was able to boot was stock froyo.....but it also freezes after a couple of minutes. and if i dont turn off during it is frozen it becomes very hot and gives over heat signal at next restart..................so assuming it had a hardware problem i returned back the device
How do you unroot the GS3 and get back to stock unrooted? I am currently just stock rooted. I'm just done with flashing and don't want to worry about something happening to my phone while I'm rooted, and am sick of it not being able to take the VZW update on a daily basis. I understand there is an unroot in the superuser app, is it as simple as clicking that and it will unroot by itself? Is there more I need to do? Thanks for your help!
Bump
Many ways to unroot, you could use SuperSU and select remove root, then uninstall the app then reboot or use universal unroot app from play store.
buhohitr said:
Many ways to unroot, you could use SuperSU and select remove root, then uninstall the app then reboot or use universal unroot app from play store.
Click to expand...
Click to collapse
Thank you. Once you perform either or these methods, can you still root again in the future if you decide to?
I unrooted through SuperSU. Went to install the VZW update and it went into Teamwin Recovery. When it was trying to update the software and running all the checks, etc. I saw "checking for MD5 file...no MD5 file found." What is this and is this what is causing me to not be able to take the update? Am I supposed to still have Teamwin Recovery? How do I get rid of it? Root Checker said I'm unrooted now.
Where do I go from here? Thanks again!
Bump
irl5fan said:
Bump
Click to expand...
Click to collapse
Flash this file:
http://forum.xda-developers.com/showthread.php?t=2795659
With this guide:
http://forum.xda-developers.com/showthread.php?t=2586319
Then you're unrooted and up to date, but you'll erase all of your data. So backup all the pictures and music you want to keep.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Flash this file:
http://forum.xda-developers.com/showthread.php?t=2795659
With this guide:
http://forum.xda-developers.com/showthread.php?t=2586319
Then you're unrooted and up to date, but you'll erase all of your data. So backup all the pictures and music you want to keep.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
None of the links to the files have anything in them. Is there another way? Any other location to find these files?
irl5fan said:
None of the links to the files have anything in them. Is there another way? Any other location to find these files?
Click to expand...
Click to collapse
You're right, try to search for it in Google. I didn't bookmark anything.
Sent from my HTC6525LVW using Tapatalk
irl5fan said:
I unrooted through SuperSU. Went to install the VZW update and it went into Teamwin Recovery. When it was trying to update the software and running all the checks, etc. I saw "checking for MD5 file...no MD5 file found." What is this and is this what is causing me to not be able to take the update? Am I supposed to still have Teamwin Recovery? How do I get rid of it? Root Checker said I'm unrooted now.
Where do I go from here? Thanks again!
Click to expand...
Click to collapse
Dude.... You shouldn't be rooting if you don't know what TWRP is.... LMAO!
You need to flash stock recovery to take the OTA, you should of backed it up when you first flashed TeamWin to the device and it would of been a simple reflash through Flashify and it would of been good.
Now you need to download Odin (A PC flash tool) and reflash through that programme....
Sent From V500
Using XDA App
unroot gs3
LiamAtkins90 said:
Dude.... You shouldn't be rooting if you don't know what TWRP is.... LMAO!
You need to flash stock recovery to take the OTA, you should of backed it up when you first flashed TeamWin to the device and it would of been a simple reflash through Flashify and it would of been good.
Now you need to download Odin (A PC flash tool) and reflash through that programme....
When did I say I didn't know what TWRP is? So if I flash stock recovery will that get me where I want to be...stock unrooted and able to take OTA updates. I never did flash any custom roms or anything while I was rooted.
Click to expand...
Click to collapse
irl5fan said:
When did I say I didn't know what TWRP is? So if I flash stock recovery will that get me where I want to be...stock unrooted and able to take OTA updates. I never did flash any custom roms or anything while I was rooted.
Click to expand...
Click to collapse
Sorry, I realise my reply come of a little arsey, I will explain.
If you take the OTA in stock recovery it will go through, but as soon as you flash a custom recovery you give up the right to an OTA whilst on said recovery,
Instead you either:
1. Flash a custom ROM, and do updates with there ROM team.
2. Wait for stock ROM to come in a flashable zip for Custom Recoverys.
If you have root and stock recovery and take it, sometime it will go through, sometimes it won't.... Like Samsung Knox for example....
Sometimes it will take but as soon as you boot back up you will have no root.
If you OTA in Custom Recovery it will boot to TWRP and most likely abort straight away and bad things will ocure.
Mixed Partitions no ROM etc...
Now back to your question....
Yeah Stock non rooted you can take OTA (but in Samsung's case, they have a flash counter, that keeps track of system mods)
Best bet would be flash through Odin, to out-the-box firmware and take the OTA from there...to avoid any conflicts with the system.
I do apologise for my earlier post mate, write back if you got it upgraded.
LiamAtkins90 said:
Sorry, I realise my reply come of a little arsey, I will explain.
If you take the OTA in stock recovery it will go through, but as soon as you flash a custom recovery you give up the right to an OTA whilst on said recovery,
Instead you either:
1. Flash a custom ROM, and do updates with there ROM team.
2. Wait for stock ROM to come in a flashable zip for Custom Recoverys.
If you have root and stock recovery and take it, sometime it will go through, sometimes it won't.... Like Samsung Knox for example....
Sometimes it will take but as soon as you boot back up you will have no root.
If you OTA in Custom Recovery it will boot to TWRP and most likely abort straight away and bad things will ocure.
Mixed Partitions no ROM etc...
Now back to your question....
Yeah Stock non rooted you can take OTA (but in Samsung's case, they have a flash counter, that keeps track of system mods)
Best bet would be flash through Odin, to out-the-box firmware and take the OTA from there...to avoid any conflicts with the system.
I do apologise for my earlier post mate, write back if you got it upgraded.
Click to expand...
Click to collapse
No problem. This has been a long drawn out process over the past few months, so forgive me for all the questions and details of events. This is where I'm at. When I started the unrooting process, as stated above, used triangle away to reset the counter and then I unrooted through SuperSU. According to root checker apps I am unrooted, but I believe my bootloader is still unlocked. And obviously still have TWRP. Phone Info: SCH-I535, Version 4.1.2, Baseband I535VRBMF1.
Given that info, do I still flash the stock firmware (from here?--->) (http://downloadandroidfiles.org/download-sch-i535-vzw-i535vrbmb1-1360821900-zip/) and then flash stock recovery? Does flashing stock firmware re-lock my bootloader? Thanks for your help.
irl5fan said:
No problem. This has been a long drawn out process over the past few months, so forgive me for all the questions and details of events. This is where I'm at. When I started the unrooting process, as stated above, used triangle away to reset the counter and then I unrooted through SuperSU. According to root checker apps I am unrooted, but I believe my bootloader is still unlocked. And obviously still have TWRP. Phone Info: SCH-I535, Version 4.1.2, Baseband I535VRBMF1.
Given that info, do I still flash the stock firmware (from here?--->) (http://downloadandroidfiles.org/download-sch-i535-vzw-i535vrbmb1-1360821900-zip/) and then flash stock recovery? Does flashing stock firmware re-lock my bootloader? Thanks for your help.
Click to expand...
Click to collapse
So you used Triangle Away to clear the flash counter?
Great, so the only thing you need now is the stock recovery image for your device,
I would say just flash the stock recovery image through Odin, but their is that many models
with different numbers, it would be easier flashing 4.1.2 firmware again through Odin.
In future bud if your gonna be messing with ROMs and Recovery files I recommend this:
Flash recovery with this:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en_GB
(Backup Stock Recovery 1st)
Backup Stock EVERYTHING, Boot, System, EFS, Data etc in Recovery of choice.
Move backup to computer or cloud storage.
Then all you need to do to go back is triangle away, restore stock backup, restore stock recovery, unroot through SuperSU.
And the OTA should work.
Sent From V500
Using XDA App
LiamAtkins90 said:
So you used Triangle Away to clear the flash counter?
Great, so the only thing you need now is the stock recovery image for your device,
I would say just flash the stock recovery image through Odin, but their is that many models
with different numbers, it would be easier flashing 4.1.2 firmware again through Odin.
In future bud if your gonna be messing with ROMs and Recovery files I recommend this:
Flash recovery with this:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en_GB
(Backup Stock Recovery 1st)
Backup Stock EVERYTHING, Boot, System, EFS, Data etc in Recovery of choice.
Move backup to computer or cloud storage.
Then all you need to do to go back is triangle away, restore stock backup, restore stock recovery, unroot through SuperSU.
And the OTA should work.
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I just want to clarify before I go ahead and do anything and get myself into a pickle. Are you saying to flash 4.1.2 firmware instead of stock recovery? Or am I still flashing both of them? If so, which order? Does that link I posted look like it is the correct firmware to you? Also, I have an older version of Odin on my computer, does that matter or should I get the newer one first?
irl5fan said:
I just want to clarify before I go ahead and do anything and get myself into a pickle. Are you saying to flash 4.1.2 firmware instead of stock recovery? Or am I still flashing both of them? If so, which order? Does that link I posted look like it is the correct firmware to you? Also, I have an older version of Odin on my computer, does that matter or should I get the newer one first?
Click to expand...
Click to collapse
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
My model number is SCH-I535. I have used Odin before, but I'll take a look at the guide just to make sure. Thanks for your help!
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I just wanted to say thanks for helping out someone in our forums with the VZW variant, I was going to chime in but I see you had things under control. It's just odd to see so many people in our forums who don't have the version we have
From my Wicked S3 on SOKP
ShapesBlue said:
I just wanted to say thanks for helping out someone in our forums with the VZW variant, I was going to chime in but I see you had things under control. It's just odd to see so many people in our forums who don't have the version we have
From my Wicked S3 on SOKP
Click to expand...
Click to collapse
No problem, glad I can help.
Verizon edition Models tend to get overlooked as oppose to International variants which is a shame, I think both should get equal recognition. Not just Sammy Verizon, most Verizon models and also Google Play Edition Model Phones/Tablets get pushed aside.... Crying shame.
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
Everything worked out great, flashed the stock firmware and was able to take the OTA. Thank you so much for your help, it's greatly appreciated!