Database Info

Magic Number Mismatch

Hey guys,
I was tired and on accidentally put the most recent clockwork recovery onto my G-tab when i was reinstalling the Vegantab 5.1 Rom.
After the install it rebooted into a black screen that said "Magic Number Mismatch:" in red.
I have used NVflash before and I went ahead and reinstalled clockwork v08 Bekit.
I got this message:
C:\Program Files (x86)\NVIDIA Corporation\tegra_froyo_20101105>nvflash --bl boot
loader.bin --download 9 clockwork.img
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x171440424380b1d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 928945/928945 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
sending file: clockwork.img
| 3862528/3862528 bytes sent
clockwork.img sent successfully
Even after this the device still gives me the "Magic Number Mismatch:" message.
I read the other threads and none of those solutions worked, nor did most of them apply to me since I can't even boot into clockwork.
any help would be appreciated

You will need to flash the "recovery partition" using nvflash.
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk

Thanks man! That did the trick.
From there i was able to reflash the older version of clockwork and my ROM.

[Q] stock recovery

Anybody know if the stock recovery is available? I have to return my phone for an exchange and cant with clockwork on it. after my 14 days are up can i still get an exchange due to reboots and lcd bleeding?

crazythunder said:
Anybody know if the stock recovery is available? I have to return my phone for an exchange and cant with clockwork on it. after my 14 days are up can i still get an exchange due to reboots and lcd bleeding?
Click to expand...
Click to collapse
Yes you can. You actually have one year warranty on the phone.
Sent from my LG-P999 using XDA App

moshe22 said:
Yes you can. You actually have one year warranty on the phone.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
that's from the manufacturer
Sent from my LG-P999 using XDA App

I've had to exchange devices before and Tmobile will just exchange it for you they basically act as the manufacturer from what i can tell. I even bought a Slide off ebay (it was NIB) but after a slight gravitational incident the screen stopped working, called Tmobile and they sent me a replacement no problems (of course i didn't mention the battle with gravity). So I would think you should be fine..

nustherapy said:
I've had to exchange devices before and Tmobile will just exchange it for you they basically act as the manufacturer from what i can tell. I even bought a Slide off ebay (it was NIB) but after a slight gravitational incident the screen stopped working, called Tmobile and they sent me a replacement no problems (of course i didn't mention the battle with gravity). So I would think you should be fine..
Click to expand...
Click to collapse
I've exchanged my vibrant at least six times since january, for minor issues and they never ask any real questions, also got a new battery from them
Sent from my LG-P999 using XDA App

G2X Factory Firmware
There's a factory firmware posted on this thread (http://forum.xda-developers.com/showthread.php?t=1037120) for the G2X. The zip file contains 2 BIN files. I tried extracting (via ExtractNow) and mounting (via Virtual Clone Drive) the bin files to no avail. I was hoping that there would be a recovery image lying somewhere inside those files.

http://mirror.dal.tdrevolution.net/ctso/g2x/part5.img
Flash it with nvflash just like you did CWM:
nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --download 5 part5.img

ctso said:
http://mirror.dal.tdrevolution.net/ctso/g2x/part5.img
Flash it with nvflash just like you did CWM:
nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --download 5 part5.img
Click to expand...
Click to collapse
Many thanks as always!

ctso said:
http://mirror.dal.tdrevolution.net/ctso/g2x/part5.img
Flash it with nvflash just like you did CWM:
nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --download 5 part5.img
Click to expand...
Click to collapse
Thanks!
Sent from my LG-P999 using XDA Premium App

i keep gettiung this....
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
c:\nvflash>nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc _x8.
bct --bl fastboot.bin --download 5 part5.img
Nvflash started
unknown command: _x8.bct
if i take out the _x8.bct i get this...
c:\nvflash>nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc --b
l fastboot.bin --download 5 part5.img
Nvflash started
but it just sits there. and i see nothing on the phone. ????
any tips would be greatly appreciated.

i guess i'll just flash the factory firmware. that will remove the clockwork recovery,correct?
the nvflash error bothers me though. i hate when i can't get something to work. i hate even worse asking for help

crazythunder said:
i keep gettiung this....
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
c:\nvflash>nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.
bct --bl fastboot.bin --download 5 part5.img
Nvflash started
unknown command: _x8.bct
if i take out the _x8.bct i get this...
c:\nvflash>nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc --b
l fastboot.bin --download 5 part5.img
Nvflash started
but it just sits there. and i see nothing on the phone. ????
any tips would be greatly appreciated.
Click to expand...
Click to collapse
You can not take that out. Check that there's no space between _final_emmc and _x8.bct. Based on your post, there's a space between.

anyone have a link to download the factory firmware?

p8585 said:
anyone have a link to download the factory firmware?
Click to expand...
Click to collapse
I guess you missed reading this right?
http://forum.xda-developers.com/showpost.php?p=13119243&postcount=6

joackie27 said:
I guess you missed reading this right?
http://forum.xda-developers.com/showpost.php?p=13119243&postcount=6
Click to expand...
Click to collapse
link in that thread isn't working

joackie27 said:
You can not take that out. Check that there's no space between _final_emmc and _x8.bct. Based on your post, there's a space between.
Click to expand...
Click to collapse
i copied it out of someones post. i'm gonna search for it and ask the op to correct it. thanks for pointing that out. i got it sorted out anyways. back to stock recovery and firmware.
actually, it's page one of this thread, doh!
that's odd. in the post with this command, there is a space. that's where i copied it from. but if i quote the op, it shows no space. something to be aware of. i've done this alot and never encountered anything like that.

p8585 said:
link in that thread isn't working
Click to expand...
Click to collapse
Yeah it's down. I downloaded it early this morning at work. But I'm home now.

How Long Must I Wait
ctso said:
http://mirror.dal.tdrevolution.net/ctso/g2x/part5.img
Flash it with nvflash just like you did CWM:
nvflash --bct 1108_Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --download 5 part5.img
Click to expand...
Click to collapse
Ok, so i've flashed and it was successful and i've been waiting on the "S/W Upgrade" screen for about 20 mins
Is that normal or am I missing a step?
How long do i have to wait?
Thanks

i know i can do the stock nandroid backup. then flash the stock recovery. then use soc to unroot. and my device will be like new.
i've just been looking for an easier way to flash those damn bin files lol. i got closer today.
the first step was the stock recovery part5.img which was successful.
C:\Users\crazythunder\Desktop\G2X\ROOT\nvflash files\NVFlash>nvflash --bct 1108_
Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --downloa
d 5 part5.img
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x02884206433fa2d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
sending file: part5.img
/ 5242880/5242880 bytes sent
part5.img sent successfully
C:\Users\crazythunder\Desktop\G2X\ROOT\nvflash files\NVFlash>nvflash --bct 1108_
Hynix_512MB_H8TBR00U0MLR0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --downloa
d 5 LGP999AT-01-V10f-310-260-MAR-27-2011+0_AP.bin
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x02884206433fa2d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 14 NvError 0x120000
command failure: partition download failed
this is the part that's failing me. i got an error with the cp.bin file as well.
i guess it's just easier to do it with the stock nandroid backup, then unroot.

Has anyone found a solution to this?

[Q] G2X won't turn on!

I have a problem with my g2x that can't be turned up, it stuck when I flash the NVflash "G2X_V21E_00_NVFlash". I did get through once then it's error again. Then I followed the same instruction but I have no idea why I can't pass through. I hope people can help me with this and tell me how or experience that they had it and solved it. Anyway, thank before the hand, I'm really appreciated your help.
Here the message I got when I tried to flash the NVFlash with G2X_V21E_00_NVFlash.
"C:\Users\Free\Desktop\Download\Software\Android\LG G2X\G2X_V21E_00_NVFlash>.\nvf
lash.exe --bct E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct --set
bct --odmdata 0xC8000 --configfile android_fastboot_emmc_full.cfg --create --bl
fastboot.bin --go
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x033c20c143e0b5d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
sending file: E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct
- 4080/4080 bytes sent
E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct sent successfully
odm data: 0xc8000
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
\ 888548/888548 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize"

Did you try doing it with the battery out and holding the volume buttons down until it gets past the bootloader?
Sent from my LG-P999

I did but it never go pass through it. It just stop at the " waiting for bootloader to initialize ". I tired dozen of time but it never works.

When I use nvflash for flashing clockworkmod, I know it's not identical to what you are doing but it should be close enough, I use these instructions and it has always worked:
===== STEP 1 - Flashing ClockworkMod Recovery 5.0.2.0:
download the 5.0.2.0 clockworkmod recovery image
place recovery-clockwork-5.0.2.0-p999.img in C:\G2x\NVFlash
Unplug everything
remove the battery
Hold Vol Up/Down (and keep them held)
Insert USB cable
open command prompt
execute the following commands:
Code:
navigate to folder with nvflash.exe in it at command prompt, for me cd g2x\nvflash
nvflash.exe --bct E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct --bl fastboot.bin --download 5 recovery-clockwork-5.0.2.0-p999.img
You should see it send a bunch of files to the device and the phone screen should say "S/W Upgrade - Please wait while upgrading...". You can let go of the volume buttons at this point. Once the files are sent and the program is finished running in the command window, you CAN just pull the USB cord or be safe and just wait a few extra minutes, however it will still say "upgrading.
Click to expand...
Click to collapse
Hope that helps somehow....

kuhla said:
When I use nvflash for flashing clockworkmod, I know it's not identical to what you are doing but it should be close enough, I use these instructions and it has always worked:
Hope that helps somehow....
Click to expand...
Click to collapse
I have no idea it's still not working any thank for your replying.

Maybe try re installing the LG and APX drivers?
Sent from my LG-P999

[Q] ZTE Grand X stuck in APX-mode

Hello
I have a ZTE Grand X.
Last night I wanted to get it out of standby (just press te power button) but that didn't work.
When I connect it to my computer it sais 'Unknow XPA Device'.
I tried all the button combinations already. NVFlasher detects the device but says that it can't find the bootloader.
(I got the drivers from here: modaco[dot]com /topic/335416-nvflash-setup-instructions-drivers-links-active/ (Sorry, not enough posts to make a link)
Any help?
Thank you!

Help?
Anyone who has a clue?
I'm getting nothing out of this phone, except the information about the chip and stuff (when I run 'nvflash --sync').
I have experience with a whole lot of flashing, but not with NVFlasher...
Help, please?
Thanks in advance!

bootloader.bin
Alright, after some searching I think I've found out how to flash the whole thing.
Not sure if it's going to work and if it does, if it's going to fix my problem.
I just need the bootloader.bin for my device (ZTE Grand X (V970)).
I hope someone responds now.

Bump... I really don't want to just throw my phone away.

Bump
bump bump bump
I've been on this forum for a long time (just surfing, not posting) and know there are a lot of talented/smart people here.
Why isn't anyone helping?

Hello, i have more problems with that phone.
I can provide the bootloader.bin, but i will not take any responsibility for it.
My problem is this, Grand X ofc stuck in APX mode, and can not download bootloader at all ! Cannot repartition memory to, can not do nothing, except sync
Here are the posts from nvflash, can someone HELP ?! Can it be helped at all ?
Code:
C:\NVFLASH\nvflash>nvflash --sync
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 4
chip sku: 0xf
chip uid: 0x04507204405fc157
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 1
command failure: no bootloader was specified
Code:
C:\NVFLASH\nvflash>nvflash --bct flash.bct --setbct --odmdata 0x80098011 --confi
gfile flash-v0901.cfg --create --bl bootloader.bin
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 4
chip sku: 0xf
chip uid: 0x04507204405fc157
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 1
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
command failure: bootloader download failed (bad data)
bootloader status: device failure (code: 2) message: flags: 0

having the same problem , need help please am stack in the APX MODE

[Completed] LG P880 Cant get out of APX mode

I have a LG P880 that had it's power disconnected and it would not turn back on. When i plugged it into PC by USB it was detected as a APX device I've read about this i downloaded and installed APX driver and a script that will supposably unbrick it with nvflash, however when i run the said script it outputs this to the command prompt
cd nvflash
nvflash --blob blob.bin --bct flash.bct.encrypt --setbct --configfile flash_encrypt.cfg --create --bl bootloader.bin.encrypt --go
Nvflash v1.7.75664 started
Using blob v1.1.57813ckY\Ap+¦}ß9
rcm version 0X30001
System Information:
chip name: unknown
chip id: 0x30 major: 1 minor: 3
chip sku: 0x81
chip uid: 0x015d3f1934440e0b
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 17
sdram config strap: 0
sending file: flash.bct.encrypt
- 6128/6128 bytes sent
flash.bct.encrypt sent successfully
downloading bootloader -- load address: 0x80108000 entry point: 0x80108000
sending file: bootloader.bin.encrypt
data send failed NvError 0x120002
command failure: bootloader download failed (bad data)
More details about the phone
OS: CyanogenMod 11 (Official, some build in 2016)
Recovery: TWRP version 2.6
Any help would be much appreciated
Cheers

Hi there and welcome to assist,
Unfortunately there is nothing about your question on XDA forum.
You'll have to create an account to post in the main forums if you have any other questions.
> LG Optimus 4X HD > Optimus 4X HD Q&A, Help & Troubleshooting
Good luck