[CDMA] WP7 EFS Access? - Windows Phone 7 Q&A, Help & Troubleshooting

OK.. I'm at my wit's end.
I'm used to programming CDMA phones (Android) to other carriers. One such carrier (Verizon) requires a file to be written in the /DMU/ folder of the EFS filesystem. Trouble is, WP7 doesn't have an EFS filesystem that I can find.
Where on WP7 or WP7.5 is this?? Qpst says that the phone doesn't support EFS, as well as QMAT, and DFS. In android, this is normally part of the radio, but doesn't seem to be the case in WP7. I've got the latest QPST, QXDM, etc. But I think the file resides somewhere on the phone OS filesystem, and not in the radio.
Without this file, the phone never authenticates for 3G... it drops back to 1X.
Anyone, please help! I'd like to get one of these on Pageplus (the Arrive), which IMHO is better than VZ's model. (I like the slider).
Thanks in advance for any insight.

Stovepipe said:
OK.. I'm at my wit's end.
I'm used to programming CDMA phones (Android) to other carriers. One such carrier (Verizon) requires a file to be written in the /DMU/ folder of the EFS filesystem. Trouble is, WP7 doesn't have an EFS filesystem that I can find.
Where on WP7 or WP7.5 is this?? Qpst says that the phone doesn't support EFS, as well as QMAT, and DFS. In android, this is normally part of the radio, but doesn't seem to be the case in WP7. I've got the latest QPST, QXDM, etc. But I think the file resides somewhere on the phone OS filesystem, and not in the radio.
Without this file, the phone never authenticates for 3G... it drops back to 1X.
Anyone, please help! I'd like to get one of these on Pageplus (the Arrive), which IMHO is better than VZ's model. (I like the slider).
Thanks in advance for any insight.
Click to expand...
Click to collapse
its not specific to WP, it must be do to with your phone its self
I have the Focus S and have access to much of the EFS, but not all, I used EFS explorer in QPST, I can read and write but as yet ive not been able to get access to /sfs /nvm or /efs_private
Can you connect to your device at all with QPST?

Hmm.. that's interesting. I'd assumed it was a WP7 thing, but if you've got a WP7 device and can use QPST EFS explorer, then it may actually be an HTC Arrive or 7 Pro thing.
I use EFS explorer on other devices, and was able to use QPST and DFS and CDMA Workshop on the arrive. EFS Explorer said that the phone doesn't support an embedded file system.
Any thoughts?

Stovepipe said:
Hmm.. that's interesting. I'd assumed it was a WP7 thing, but if you've got a WP7 device and can use QPST EFS explorer, then it may actually be an HTC Arrive or 7 Pro thing.
I use EFS explorer on other devices, and was able to use QPST and DFS and CDMA Workshop on the arrive. EFS Explorer said that the phone doesn't support an embedded file system.
Any thoughts?
Click to expand...
Click to collapse
do you have your SPC code?
I used RevSkills tool to change mine to all zeros, I did that first before even attempting to use EFS so I cant be sure if that is why it wouldn't work but its an idea
the other thing is the diagnostic mode, how are you doing this? do you put it in to download mode? or do you use some kind of tool to change the USB mode to USB diagnostic mode WITHIN windows phone? I can only get the latter to work, but that doesn't give me full access to the file system, I cant get download mode to work at all which is a real pain in the arse!

Related

[Q] Is it possible to change NV Items in WM?

Hello, is it possible to change a NV Item by using a cab file , for instance?
I can change it by using QPST/QXDM but I'm wondering if a cab file could do the trick.
Tks,
Jeffrey
any clue? please!
Hypothetically it's possible and some vendors have left backdoors to access NVRAM from the OS, but I doubt there's a tool readily available that exploits these. So short answer is: no
do you know any AT command that would sticky the phone to GSM only? I tried a lot of them (AT+BANDSEL, etc etc..) none seems to work..
I'm trying to lock one MSM 7201 to gsm mode... I can do it using QPST/QXDM but I want to do this in the windows mobile.... tks!

[Q] CDMA Workshop or the like to make alterations for Nexus S 4G?

Does cdma workshop work with the nexus s? nexus s 4g? looking to get in there and alter what I can...hopefully the eri banner. thank you!!
edit: any other way to get in there would be good too. looking to change the sci, accolc, eri, etc, etc. thanks!
I am looking for the same thing.
If I can get the phone into diag mode, I should be able to get it working.
I am having trouble figuring out how to enter the diag mode.
The normal methods (##Code) doesn't work.
I played with CDMA Workshop earlier after installing EPST and have it not working. It looks like it would need a modified dongle to get the Nexus to enter DL or modem mode as the ## codes don't work. Using all other modes I can't seem to get the program to recognize I have the phone plugged in. I could be missing something but have yet to find anything relevant as a CDMA Nexus is the new crittter on the block.
Update on my previous post, to get the NS4G into D/L mode you hold both volume keys down while pressing the power on button for just a second. Now I just need to find the drivers for this mode.
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
tanman21 said:
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
Click to expand...
Click to collapse
unfortunately, i need the samsung drivers seeing as how my mobile is my web connect.
anyone have the drivers to install??
edit: got it...somehow I found the drivers and got them installed...
tanman21 said:
Got it working!
Here are the steps. I am using Windows 7, I have the Android SDK installed, and Windows update gave me the drivers I need.
1. Make sure USB debugging is off.
2. Dial *#*#8778#*#*
3. Change both settings to Modem.
4. Windows 7 will install your drivers.
5. Add the correct com port, in QPST Config.
6. Open QPST Service Programming, and your all set.
Click to expand...
Click to collapse
got it!
i can view everything in cdma workshop. but when i click 'write', it tells me phone is asking for spc(6 digits). i assume this is my msl which i havent gotten yet for this device...
where do i enter the spc so that i can write changes? thank you!!!
edit: got my msl but i dont think its helping here...my main goal is to alter the sci, which i cant do without cdma workshop, yet. id also like to change the banner but nothing seems to be sticking. thanks for the help!
gotta change the banner, sci...
Last day of classes seems like a good time to tackle this issue.
Gonna continue tinkering around...hopefully we can change the SCI and eri banner(want mine to read 'Google' or 'Nexus S 4G').
Any help would be much appreciated and yield you a wookie life debt. Thank you!!!
Still messing around and I cant seem to find a way to make these alterations. Anyone else have any better luck? Skills?
Thanks!!!
Thanks for the dialer code .. much quicker than decompiling the apk.
I saw references to MSL in this thread and google brought it up as the first result for the ns4g, but no mention of how to obtain it.
For those wondering, getprop | grep MSL will show the MSL. If you don't have busybox installed (for grep), just type getprop after you after root in adb shell or terminal emulator/connectbot and scroll through the list of output, MLS will be in there.
Hope this helps save some time for people! Thanks Samsung and Google for keeping it simple! Thanks for this helpful thread!
when i change them both to modem nothing happens, what do di do when i change them.
with my unrooted s4g, i can access the info in cdma tools. i can connect, read the settings...when i attempt to write changes, sometimes it tells me the phone is requesting the spc. other times it will write certain things and fail writing others..regardless, nothing sticks. frustrating...hopefully i can hold off on rooting again until the 3d comes out...gotta be a way to make it happen without rooting(wishful) or editing eri.xml but if this the only way to make changes to sci, banner, etc; im gonna have to wait until i play with the evo3d...really dont wanna wipe data again
WITH BOTH QPST AND CDMA WORKSHOP, I AM ABLE TO READ THE PHONES SETTINGS BUT I CANT WRITE TO IT. woops, sorry bout the caps.
anyway, when i click write, some things write and others dont. then when i click read, the banner is recognized as google even though it reads sprint on my phone still. often time when i click write in cdma workshop, it tells me phone is requesting spc, spc is required.
update: it seems that the sci and access overload class have stuck to the values that i chose. however, the main goal for me is to alter the banner to read 'Google'.
any input is much appreciated. thank you!
By any chance, are there any tutorials or has anybody successful flashed a Hybrid PRL USING cdma workshop??
Samsung phones such as the Moment and Epic 4g need 'default password' sent to unlock the nvitems to be writeable. Has anyone thought of this or tried this? Maybe the Epic 4g password works?
USB Device Not recognized
Guys i need help i tried everything already!!! My nexus s when i connect the phone to the computer does recognized everything except when i tried to go on modem mode. Do u guys have any clue how to fix this?????
I've been able to flash prl with qpst.
I'm not certain why qpst or the like wouldn't recognize your device.
Sent from my Nexus S 4G via XDA Premium
USB Device Not recognized
it's not the program that is not recognized the phone is my computer that's not recognized my phone on modem mode. i really don't know what's wrong i tried to update the drivers but the computer still no recognizing the phone? what's the procedure that u are taking to get your phone recognized by your computer? (i am using windows xp sp3)
pilussa85 said:
it's not the program that is not recognized the phone is my computer that's not recognized my phone on modem mode. i really don't know what's wrong i tried to update the drivers but the computer still no recognizing the phone? what's the procedure that u are taking to get your phone recognized by your computer? (i am using windows xp sp3)
Click to expand...
Click to collapse
you got the sammy drivers installed? pda net? android usb driver?
yes i did.

[Q] How to make cdma-carriers-conf can be used in the rom?

Hi Guys,
I am using the CDMA android phone and found that the phone is not able to connect the internet via 3G. The problem is that the APN is not set in the phone. However, I have another CDMA phone and there have a files call cdma-carriers-conf.xml under /system/etc. I copy this files to my phone but it seems that it doesn't work. Do anyone know how can I make the system to detect the cdma-carriers-conf.xml rahter than apn-conf.xml?
Thx,
Xcraft

Flashing Nexus 5 (D820) into your own CDMA carrier

This is just a small guide on how to flash Nexus 5 D820 (US version) from Sprint to other CDMA carriers. Please mind that this is a trial and error guide which I tried many times before I succeeded flashing my Nexus 5. So if there are some mistakes that needed to be corrected , please tell me and I won't mind .
So let's begin: First, you need to root your Nexus 5. I will not provide on how to root it since there are lots of guides out there if you google it. Ok, after that you need to install the Nexus 5 Windows driver which you can download it from here: http://drivers.softpedia.com/get/MOBILES/LG/LG-United-Mobile-Driver-381.shtml
Since LG Nexus 5 doesn't have dial code for diag mode we have to flash diag mode boot img file which you can download from here: http://forum.xda-developers.com/attachment.php?attachmentid=2421929&d=1385715923
You can use Flashify which can be downloaded from Google Play Store to flash the img file. The phone will reboot after you flash it.
Ok, after all that you can connect the Nexus 5 to the pc/notebook using the usb data cable. Usually Windows will automatically install all the drivers for the Nexus 5 once you connect it. Oh, don't forget to enable the USB debugging mode from the developer options menu.
After all the needed drivers have been installed, we will enter the rather complicated on how to use adb shell command. You all can read the guides here: http://forum.xda-developers.com/showthread.php?t=2514396
There will be SDK Tools which you have to download for Windows. The guide will tell you all on how to install it.
For the flashing tools, we need:
1) CDMA Workshop 3.9
2) DFS tools
3) QPST
All these tools you have to find/buy them by your own since I can't provide them. Sorry.
Ok let's enter into diag mode. Go into command prompt window and type:
adb shell
then type:
su
(here the $ sign will change into #)
and then type:
setprop sys.usb.config diag,adb
Ok we should be in diag mode now. We will use CDMA workshop first. Set the port. and then click connect. We will find the SPC code and change it. Go into the security tab. In SPC/user lock , let's change the Default (NV_read) into LG method. and click read. We will see some numbers in the box. We will click the SPC button now, there will be a writing like this: Write "000000". Choose that. And SPC code has been changed from those confusing numbers into simple numbers 000000. We succeeded unlocking the SPC. Click reset on the right top corner (it looks like reload button). After that reboot your Nexus 5.
Get into diag mode again. Open your CDMA Workshop again. Connect. Get into memory tab. Go into NV-items. Write nv-item which you can download from: http://www.cricketusers.com/sprint-lg-optimus-s/16145-optimus-s-cdma-ws-3-x-nv-items.html
Ok choose reset and then reboot your phone again.
Get into diag mode again as usual. We will use DFS software now. Choose port. Connect. And click SPC which usually written down 000000. It will unlock the phone so we can write down settings into it. All right in here go to Programming tab where you need to enter all your MDN, MIN, Akey, PRL, etc informations which you can get from your own carriers/operators. If using DFS is confusing, please read the guide first. I am sure you can find some in google .
Ok if everything is written and you press reset on DFS. Reboot your phone. Usually after this you can use your phone for calling and sending SMS text. Oh, don't forget to insert a simcard in your phone. Usually just put a GSM card. This phone can be used for either CDMA or GSM. There will be a new menu in mobile network. LTE-3G-1x-Global(GSM).
But the 3G EVDO for data connection will not work at this stage. So we will use QPST software. Use the latest QPST software 2.7 built. Connect and as usual you have to enter SPC code. Go into PPP config tab. There you will go into Um tab. Check if our user id is the same as the user id as given by your own carrier or is it still filled by Sprint's user id? If the Sprint's id is still written there, go into the user id box and press ctrl-d from your keyboard to wipe the Sprint's ID. And then do the same thing in AN tab. After all that, press write to phone. Reboot your Nexus 5.
Get into the diag mode again...hope you guys don't get tired of it though :laugh: Open QPST, read from your phone, get into PPP config. Go into Um tab and the user id box should be empty now. Fill it with your user id and password too. And do the same thing in AN tab. Go into M.IP tab and check if profile 1 (ignore profile 0) is enable. get into it and check if both NAI and Tethered NAI are written with our own user id. Write to phone and reboot your phone.
We will wait for a few minutes......and usually 3G EVDO sign will come up. Go into About Phone, take a look in Status is it written: CDMA-Evdo rev. A....if it is congrats, you have successfully flash your phone with your own carrier. :laugh:
Hopefully this guide will help you guys. I know it's a bit confusing. Hey it's my first time writing a guide....If there's any mistake that I made, please don't hesitate to tell me. Thanks guys.
hendrali said:
This is just a small guide on how to flash Nexus 5 D820 (US version) from Sprint to other CDMA carriers. Please mind that this is a trial and error guide which I tried many times before I succeeded flashing my Nexus 5. So if there are some mistakes that needed to be corrected , please tell me and I won't mind .
So let's begin: First, you need to root your Nexus 5. I will not provide on how to root it since there are lots of guides out there if you google it. Ok, after that you need to install the Nexus 5 Windows driver which you can download it from here: http://drivers.softpedia.com/get/MOBILES/LG/LG-United-Mobile-Driver-381.shtml
Since LG Nexus 5 doesn't have dial code for diag mode we have to flash diag mode boot img file which you can download from here: http://forum.xda-developers.com/attachment.php?attachmentid=2421929&d=1385715923
You can use Flashify which can be downloaded from Google Play Store to flash the img file. The phone will reboot after you flash it.
Ok, after all that you can connect the Nexus 5 to the pc/notebook using the usb data cable. Usually Windows will automatically install all the drivers for the Nexus 5 once you connect it. Oh, don't forget to enable the USB debugging mode from the developer options menu.
After all the needed drivers have been installed, we will enter the rather complicated on how to use adb shell command. You all can read the guides here: http://forum.xda-developers.com/showthread.php?t=2514396
There will be SDK Tools which you have to download for Windows. The guide will tell you all on how to install it.
For the flashing tools, we need:
1) CDMA Workshop 3.9
2) DFS tools
3) QPST
All these tools you have to find/buy them by your own since I can't provide them. Sorry.
Ok let's enter into diag mode. Go into command prompt window and type:
adb shell
then type:
su
(here the $ sign will change into #)
and then type:
setprop sys.usb.config diag,adb
Ok we should be in diag mode now. We will use CDMA workshop first. Set the port. and then click connect. We will find the SPC code and change it. Go into the security tab. In SPC/user lock , let's change the Default (NV_read) into LG method. and click read. We will see some numbers in the box. We will click the SPC button now, there will be a writing like this: Write "000000". Choose that. And SPC code has been changed from those confusing numbers into simple numbers 000000. We succeeded unlocking the SPC. Click reset on the right top corner (it looks like reload button). After that reboot your Nexus 5.
Get into diag mode again. Open your CDMA Workshop again. Connect. Get into memory tab. Go into NV-items. Write nv-item which you can download from: http://www.cricketusers.com/sprint-lg-optimus-s/16145-optimus-s-cdma-ws-3-x-nv-items.html
Ok choose reset and then reboot your phone again.
Get into diag mode again as usual. We will use DFS software now. Choose port. Connect. And click SPC which usually written down 000000. It will unlock the phone so we can write down settings into it. All right in here you need to enter all your MDN, MIN, Akey, PRL, etc informations which you can get from your own carriers/operators. If using DFS is confusing, please read the guide first. I am sure you can find some in google .
Ok if everything is written and you press reset on DFS. Reboot your phone. Usually after this you can use your phone for calling and sending SMS text. Oh, don't forget to insert a simcard in your phone. Usually just put a GSM card. This phone can be used for either CDMA or GSM. There will be a new menu in mobile network. LTE-3G-1x-Global(GSM).
But the 3G EVDO for data connection will not work at this stage. So we will use QPST software. Use the latest QPST software 2.7 build 422. Connect and as usual you have to enter SPC code. Go into PPP config tab. There you will go into Um tab. Check if our user id is the same as the user id as given by your own carrier or is it still filled by Sprint's user id? If the Sprint's id is still written there, go into the user id box and press ctrl-d from your keyboard to wipe the Sprint's ID. And then do the same thing in AN tab. After all that, press write to phone. Reboot your Nexus 5.
Get into the diag mode again...hope you guys don't get tired of it though :laugh: Open QPST, read from your phone, get into PPP config. Go into Um tab and the user id box should be empty now. Fill it with your user id and password too. And do the same thing in AN tab. Go into M.IP tab and check if profile 1 (ignore profile 0) is enable. get into it and check if both NAI and Tethered NAI are written with our own user id. Write to phone and reboot your phone.
We will wait for a few minutes......and usually 3G EVDO sign will come up. Go into About Phone, take a look in Status is it written: CDMA-Evdo rev. A....if it is congrats, you have successfully flash your phone with your own carrier. :laugh:
Hopefully this guide will help you guys. I know it's a bit confusing. Hey it's my first time writing a guide....If there's any mistake that I made, please don't hesitate to tell me. Thanks guys.
Click to expand...
Click to collapse
ok nice info. can u clarify ll flashing clears all apps & phone ? need to take backup ? probably a noob question.
No, it will not wipe out any of your app. But you are welcome to backup your phone first
Sent from my Nexus 5 using XDA Premium 4 mobile app
hendrali said:
No, it will not wipe out any of your app. But you are welcome to backup your phone first
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
is cdma workshop must ? coz i dont have or cant buy it. dfs itselfs allows read & write of spc.
getting PRL is also prob. tried cant find for cdma service provider. any other option ?
---------- Post added at 08:20 PM ---------- Previous post was at 07:29 PM ----------
madroamer said:
is cdma workshop must ? coz i dont have or cant buy it. dfs itselfs allows read & write of spc.
getting PRL is also prob. tried cant find for cdma service provider. any other option ?
Click to expand...
Click to collapse
i flashed the device. i can see nexus 5 under devices in ddevice manager. all drivers installed. no issue.
i opened command prompt and type adb shell... den su...
wen i type setprop sys.usb.config diag,adb nexus 5 disappears in devices but doesnt show in any ports ...!!!!!!! y so ? how to rectify this
Hi could you please clarify me what do you get when doing this operation? I was looking into a way to use 4g in Europe from the nexus 5 d820 version, since here the channels used are not supported by this version. I suppose this tutorial doesn't have anything to do with the lte channels é hehe.
Thx
Sent from my Nexus 10 using Tapatalk
Hey,
Very nice detailed guide, I'm sure it will help a lot of people looking to flash their N5s.
Thanks.
Sent from my Nexus 5 using Tapatalk
leonux said:
Hi could you please clarify me what do you get when doing this operation? I was looking into a way to use 4g in Europe from the nexus 5 d820 version, since here the channels used are not supported by this version. I suppose this tutorial doesn't have anything to do with the lte channels é hehe.
Thx
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Sorry this guide is only for flashing CDMA.
madroamer said:
is cdma workshop must ? coz i dont have or cant buy it. dfs itselfs allows read & write of spc.
getting PRL is also prob. tried cant find for cdma service provider. any other option ?
---------- Post added at 08:20 PM ---------- Previous post was at 07:29 PM ----------
i flashed the device. i can see nexus 5 under devices in ddevice manager. all drivers installed. no issue.
i opened command prompt and type adb shell... den su...
wen i type setprop sys.usb.config diag,adb nexus 5 disappears in devices but doesnt show in any ports ...!!!!!!! y so ? how to rectify this
Click to expand...
Click to collapse
Ok for the SPC try this app which u can download from here: http://forum.xda-developers.com/showthread.php?t=2394499
I haven't tried it yet, but I hope it will work for you. Read the SPC first and then write 000000. Hope it helps. As for the PRL, you have to have it or else it will not work. Ask your carrier/operator or search it in Google.
And for the adb shell....what happen when u type su? does the $ sign change into # sign?
hendrali said:
Ok for the SPC try this app which u can download from here: http://forum.xda-developers.com/showthread.php?t=2394499
I haven't tried it yet, but I hope it will work for you. Read the SPC first and then write 000000. Hope it helps. As for the PRL, you have to have it or else it will not work. Ask your carrier/operator or search it in Google.
And for the adb shell....what happen when u type su? does the $ sign change into # sign?
Click to expand...
Click to collapse
s boss it does change to $ sign. den only typed the code...i cant get in ports
hendrali said:
Use the latest QPST software 2.7 build 422.
Click to expand...
Click to collapse
Hello, fellow QPST users.
QPST 2.7 Build 4.2.2 is a fake version with keylogger.
Some a$$hole downloaded latest public QPST build (4.0.2) and decompiled MSI installer package, then edited all "4.0.2" to "4.2.2", added "fake changelog", added keylogger (qualcomm.exe), then repackaged and spread around web!
Everyone who downloaded QPST build "4.2.2" should change all his passwords.
More info about malware from fake 4.2.2 build (QPST.2.7.422.msi)
MSI package (QPST.2.7.422.msi) was embedded/tampered with qualcomm.exe which is a .NET based malware that logs your keystrokes and sends it to attacker's server.
How to delete the actual malware from your system?
Look at the startup from msconfig or CCleaner, there should be a file called qualcomm.exe thats set to start everytime system starts. Delete both registry and file.
If you wanted to see what data thief was stolen from you. Just open the .dc file (in "dclogs" folder) with Notepad and see for yourself.
In XP, dc file is located here!
C:\Documents and Settings\Administrator\Application Data\dclogs
there should be a file called "201X-XX-XX-X.dc
if you open that DC files with Notepad, you'll see all your keystrokes.
Here is mine. I've intentionally entered paypal site with fake info.
:: Run (3:01:51 AM)
Script kiddie. NET Based malware, huh?[ESC]
:: Program Manager (3:02:14 AM)
e
:: Firefox (3:02:18 AM)
www.paypal.com
[email protected][TAB]
mypaypalpass
[ENTER]
:: Documents and Settings (3:02:19 AM)
[UP]
:: Administrator (3:02:28 AM)
[DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN]
[DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN][DOWN]
d
:: (3:02:34 AM)
:: Administrator (3:02:34 AM)
d
:: (3:03:11 AM)
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
:: [Release] QPST 2.7 BUILD 422 - Download Here - Enjoy - Mozilla Firefox (3:03:57 AM)
crap
How to delete?d
:: Clipboard Change : size = 16 Bytes (3:03:57 AM)
QPST.2.7.422.msi
:: (3:04:23 AM)
cccccc
Click to expand...
Click to collapse
Keylogger sends the logs from keylogger to "qpst.hopto.me"
So please report about this incident where and when you encounter QPST 4.2.2 somewhere (forums, posts, sharing-sites, etc)
Copy my whole post and paste it where you see 4.2.2 mentioned.
Bonus: Fake Changelog
If you've installed this 422 build, then open the Readme.txt in C:\Program Files\Qualcomm\QPST\Documents
Scroll down and see the "6/12/13 QPST 2.7.422 changelog"
6/12/13 QPST 2.7.422
1) EFS Hello commands will not be sent unless the device is in a compatible mode. Sending this command when the
device is in download mode can cause a "server busy" message for a few seconds because of command retries.
2) Support for the Sahara device protocol (see 80-N1008-1 or equivalent) is now built in to the QPST server process.
This protocol is only supported by USB Serial ports, not TCP/IP connections. In QPST Configuration a device in
this mode will display as "Q/QCP-XXX (Sahara Download)". This mode can only be detected (1) when the QPST server
process starts or a COM port in this mode added to QPST, or (2) when a device enters Sahara mode on a port assigned
to QPST. This is because the device only sends its Hello message once, as soon as the COM port is opened.
Click to expand...
Click to collapse
Changelog above is actually cloned from QPST 2.7.394 Just scroll down and see Build 2.7.394 changelog. Its same!
So forget about Build 422. It doesn't exist.
Use QPST 2.7 Build 402. It's the latest public build
Sorry about my english
Best Regards
AnycallMongolia
Ok. Thanks for giving this info about the QPST 4.2.2. I didn't know it was a fake one. Luckily i checked mine didn't have the virus. I guess someone cleaned up the version that i downloaded somehow.
Sent from my Nexus 5 using XDA Premium 4 mobile app
hendrali said:
Ok. Thanks for giving this info about the QPST 4.2.2. I didn't know it was a fake one. Luckily i checked mine didn't have the virus. I guess someone cleaned up the version that i downloaded somehow.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Uh, no! You've just been told it's a fake. Get the official one until told otherwise would be my recommendation
Yup i guess so. I will download the latest official release then. I will edit my post so no one will download the fake one.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Flashing My N5 To Boost (maybe...lol)
I really want to flash mine to Boost but I since I only want to do one phone I don't want to purchase CDMA workshop to do it and the free edition (2.7) lets you get the SPC but won't let me write the NV items. Is there another program that will let me write the NV items, one that doesn't cost $100
Also, I want to flash mine to Boost Mobile and wondered if anyone out there has done it and succeeded. I sent mine to a phone flasher and at first he said he could do it then sent it back telling me he couldn't. So I paid $360 for a phone thats just sitting there...LOL
s me too waiting for a s/w free to use to write NV & misc
Did u guys try this one yet? http://forum.xda-developers.com/showthread.php?t=2394499
Sent from my Nexus 5 using XDA Premium 4 mobile app
no new port or lg.... shows in com/port in device manager
wat is the reason ?
device is otherwise fine with response to commands...
using windows 8. pl help
i even tried in win 7. after type setprop ... no change...no new port opens...
tried for so many time...some one help to identify issue
This is AWESOME news!!! Now I do have one question... If we were to flash the N5 to our carrier (nTelos in this case) and I put in my LTE sim card, will it activate on LTE, or will it only work with the 3G CDMA portion? - I know that with the nTelos iPhones, they can be activated on standard CDMA and work on 3G, then when you insert a sim card, it updates the carrier settings automatically, and it starts working on LTE. Is that the same case here?
EddyOS said:
Uh, no! You've just been told it's a fake. Get the official one until told otherwise would be my recommendation
Click to expand...
Click to collapse
where?
Whe last I looked all I found was on forums like XDA.?
BTW there's a post somewhere (can;t remeber exactly, it's either Nexu 5 or 4 or some other LG phones forum ) that shows you how to get the SPC,
resign all the APK that come with the blobs
OmaDmclient.apk,SprintHiddenMenu.apk,Term.apk,TimeService.apk,UpdateSetting.apk,qcrilmsgtunnel.apk,shutdownlistener.apk
with the platform key (if on stock rom no need anything else AOSP based you have to resign then with the platform key which is the testkey -the one everyone uses to signe zips)
and Nexus 5 test field from the play store
and o/c ADB
EDIT: to get SPC
http://forum.xda-developers.com/showthread.php?t=2515798
*#*#3282#*#* doesn't work
so you'll need http://forum.xda-developers.com/showthread.php?t=2524744
or simply in adb type "am start -n com.lge.SprintHiddenMenu/.sprintspec.Debug"
to arrive to the "6. Select "LTE/Edit" again."
you need stock rom for that unless you resign the apk I mentionned above.

NV partition gone

Hello , yes i erased the nv partition by a mistake , but, i still have the box with 2 dual sim IMEI and ither 2 codes on it, someone told me i can repair them but dont know how exactly. Should i use Maui meta or Sn writer tool? Do i need nv backup of another redmi 9 to do this? I remember many years ago i did it but i really cant remember how
The /NV partition not only holds the IMEI but other important data, too, such as SN, Baseband, product code, BT/WiFi mac address, RIL calibration files, DRM info and some other data like language, timezone set by your provider.
​
xXx yYy said:
The /NV partition not only holds the IMEI but other important data, too, such as SN, Baseband, product code, BT/WiFi mac address, RIL calibration files, DRM info and some other data like language, timezone set by your provider.
​
Click to expand...
Click to collapse
Ty for helping, can i ask you wich one of those Is foor Google authentication? I have SN , imeis and others, but seems like i cant use sn writer to writer those, my NV partiton Is erased, i tried to flash nvram and nvdata with no luck, tried with SPFT gives errors, tried via fastboot but there Is a protection and doesnt work.
Now i flashed twrp and installed magisk, i wonder how i can remove those protection that wont allow me flash those partitions.
Aniway only thing not working Is the signal ( but detects Sims) , and Google , seems like invalid Mac address too
IDK
what exactly does not work with SN Write Tool?
"It allows users to flash various options apart from flashing the IMEI only. It supports Barcode, BT Address, Wifi Address, Wifi EPPCopy, Mac Address, DRMkey MCID."
the funny thing is you did the same stupid mistake like years ago..
I get errore messages, seems like my PC fails to connect, i do t know if needs CDC drivers, but i cant Install them because my PC wont Install unsigned drivers even if i try to disable that with CMD, changing boot options, or tools to allow that, maybe because its a light, modded version of windows and Is missing many services and sruff, aniway i fixed It by using Maui Meta winth a ENG rom, second IMEI was ok but had still the dm Verity corrupted, then i installed Magisk and disabled Verity check teough Fastboot when flashing Vbmeta.
I still have invalid Mac no serials etc, but everything Is working indont really Need to write those, i can Remember using SN write tools before with another windows
, Will try when i change OS, thank you
aIecxs said:
what exactly does not work with SN Write Tool?
"It allows users to flash various options apart from flashing the IMEI only. It supports Barcode, BT Address, Wifi Address, Wifi EPPCopy, Mac Address, DRMkey MCID."
the funny thing is you did the same stupid mistake like years ago..
Click to expand...
Click to collapse
Did you write Mac address?
aIecxs said:
Did you write Mac address?
Click to expand...
Click to collapse
I did not, i can ONLY use Maui Meta v 10, i dont understand HOW and if i can use the NVRAM editor to write that. I researched a bit but found nothing about that
I think you need to select proper baseband from database, then just enable one more checkbox for repair Mac address, thats it.
Or do you mean SN Write Tool isn't working at all? The flashing procedure is same as for SP Flash Tool, you need VCOM preloader drivers installed and device powered off.

Categories

Resources