Related
Just bricked my defy last nigh accidentally then flased a full nordic 2.2.2 via rsd lite everything went fibe BUT when i was going to install some roms via nandroid backup I get this errors.
tried flashing a 2.1 eclair but it wont boot up so I reflashed the 2.2.2 nordic for about 10x already
here's what cwm says when restoring
ClockworkMod Recovery v2.5.1.8
Checking MD5 sums...
Restoring System...
Restoring Data...
Restoring ,Android_secure...
Restoring Cache...
Restoring sd-ext
no app2sd partiton found. Skipping format of /sd-ext.
E:Can't mount /dev/block/mmcblk0p2 (file exists)
Can't mount /sd-ext/!
and more when on the stock recovery is says something that it can't mount etc2
please help me out guys this is really important
ive read through some forums and found that I need to repartition.how?what's the easiest way?
tried wiping dalvik cache but it fails too.
cant download from market too.
this sucks.
its my first android phone and now im messed up!!
I will really apreciate your help please
EDIT:now Im using MIUI but still unable to mount sd-ext
and these few errors
E:Can't mount /dev/block/mmcblk0p2
(File exists)
E:Can't mount CACHE:recovery/command
and log
what do O do pls?
sent from my MB525 using XDA Premium App
In stock recovery do factory reset wipe cache and reboot and flash ur SBF....
Sent from my MB525 using XDA App
bricked?
WTH happened?
are u able to go stock recovery? did you do a data & cache wipe?
it should all do it.after u can flash a different & clean SBF.
also try to format sdcard as well..dont bother losing the nand backup...
then just use rsd lite to reflash a different leaked/official 2.2 froyo
hi tnx all for ur help.
yes i am able to go stock recovery and even cwm recovery via 2init 1.4 its a stock clean froyo
im getting this error on stock recovery
it says
E:un able to read cahe/recovery/command and starter
anyone suggestion?
wiping dalvik cant be done due to errors posted above
Sent from my MB525 using XDA Premium App
After wipe and reset just flash SBF...Error is not problem according to me....
Sent from my toilet using my Motorola DEFY
Ok if you heve stock and second init recovery then nothing is lost. What CWM- says is totally OK. And stock recovery always unable to read /cache/recovery/command.
What firmware were you on when installed second init? You sould try to restore the nandroid of that firmware with CWM.
If you wiped your phone with stock recovery then CWM will not work then you should flash your stock sbf with RSD lite.
ok will try when I get back home and will post the results
note: im on cm7 beta 6 b4 this happened.
Sent from my MB525 using XDA Premium App
You have to go back to Nordic, via RSD Lite .
Flash the full rom, since you already flashed the whole sbf one time, you won't be worry about downgradability, it's lost.
Then wipe again, at the end the cwm should work as expected.
Just as a note after i flashed the full Nordic sbf i got stuck so i went into stock recovery and wiped data etc. This let me boot the nordic rom. Then just need to root, install 2nd init and reinstall cm7
yay! now im on cm7 and will check if the errors are still there
and btw how do I go back to 2.2.2 stock in order to install ephunord rom
edit:
custom recovery says
E:unable to read cahe/recovery/command
E:unable to read cahe/recovery/starter
then when wiping dalvik cache on cwm
when pressing wipe dalvik cache
E:unknown volume for path [/sd-ext]
then when I confirm it it says
dalvik cache wiped.
is it normal?
can't install the google apps package too downloaded many times but it always end up on bad installation or something
wew im so stressed with my phone right now
gonemad02 said:
yay! now im on cm7 and will check if the errors are still there
and btw how do I go back to 2.2.2 stock in order to install ephunord rom
edit:
custom recovery says
E:unable to read cahe/recovery/command
E:unable to read cahe/recovery/starter
then when wiping dalvik cache on cwm
when pressing wipe dalvik cache
E:unknown volume for path [/sd-ext]
then when I confirm it it says
dalvik cache wiped.
is it normal?
can't install the google apps package too downloaded many times but it always end up on bad installation or something
wew im so stressed with my phone right now
Click to expand...
Click to collapse
yah that appears on mine too,those unable to read things:i reformat my sdcard clean & i treat it normal since i've been flashing & experimenting a lot,& i dont do a backup of any of my nands i only back up my apps.
since IMO i will never go back to eclair for any warranty,only forward to the developments..
i trust my defy just like i trust the resources i get here in the forums ;D
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
gonemad02 said:
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
Click to expand...
Click to collapse
Have you tried to format your sd card with your phone?(not from pc)
yes tried it a couple of times already
anyone knows how do I wipe dalvik cache using adb?
these are the remaining errors I still have
E:Can't mount /dev/block/mmcblk0p2
(File exists)
E:Can't mount CACHE:recovery/command
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
bomgavs said:
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
Click to expand...
Click to collapse
try wiping cache factory and dalvik cache
gonemad02 said:
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
Click to expand...
Click to collapse
most probably yes,my card would be on fat32 on default since its 4gb.
unless i force format it w/ fat16 from my pc.but it shouldnt be an issue.
well i get those kinds of errors too.i cant flash the gapps zip for the cm7
i even get failed write to SD whenever i download an app from the market or an unknown file out of the market.
bomgavs said:
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
Click to expand...
Click to collapse
when u see the green robot:
press the volume up & down together to enter stock recovery.
use the volume up/down & power button to select.
tap ok button on the left corner to continue the process of wipe.
I see. we do really have the same issue.
Im now on MIUI.shame...can't even try roms via nandroid backups.
will parted work to fix/format my cache including the sd-ext one?
I cant mount it no matter what I do
I believe parted will work.
and whenever I try to root using super one click
it gives some error regarding cant mount etc2 file exists
but in the ened it's successful.
Sent from my MB525 using XDA Premium App
Errors in our sd card
Well yah.thats tthe reason why im back now on stock blur french..everything back to normal & ready to flash again...i dont know,maybe the card gets corrupted whenever im on a custom rom...
Ok so how's miui?any luck on that one? No time to flash now busy w/ my baby.... Im still longing for the cm7,maybe the nxt rel will be complete.
I tried to use the superboot method for 2.3.4 as I have in the past, and did it, but now my phone gets stuck on the Google screen with the unlock symbol. I can boot into Bootloader Mode, but I have to do a battery pull to get off the Google screen. I need help ASAP.
I have a Mac with Fastboot installed
I need to get fresh 2.3.4, no root
I have the stock recovery
Try using oneclick.
Sent from my Nexus S 4G using XDA App
That's not enough information. Plus I don't care about root. I just need a working phone at this point
Download both cwm recovery and a full rom for your device (see sticky in general forums for the rom)
Flash cwm recovery via fastboot
Boot into recovery
Factory/data reset
Wipe dalvik cache
Mounts&Storage > format /system (should be enough, if not format everything there is)
Mounts&Storage > mount /sdcard
Mounts&Storage > Mount USB storage
Copy rom on the sdcard
Install rom via recovery (install zip from sdcard)
If you get a signature error deactivate the sig check in recovery (install zip from sdcard menu, IIRC not sure, but it's there somewhere)
--
Afterwards you'll have a stock rom with stock recovery, unrooted.
Im stucked at boot logo...i tried factory reset and wipe cashe partition and after that i flashed 2.3.4 firmware over cm 7.1 and after that i couldnt pass boot logo
i just get this massage when i try to factory reset phone from recovery.
PLS help!!
E:failed to mount /data (invaled argument)
E:copy_logs_files_to_data :: can't mount /datareboot...
Chutura said:
Im stucked at boot logo...i tried factory reset and wipe cashe partition and after that i flashed 2.3.4 firmware over cm 7.1 and after that i couldnt pass boot logo
i just get this massage when i try to factory reset phone from recovery.
PLS help!!
E:failed to mount /data (invaled argument)
E:copy_logs_files_to_data :: can't mount /datareboot...
Click to expand...
Click to collapse
Stay calm, we do step after step.
First of all, that we all understand some questions:
1. which Firmware you started before it happened?
2. what did you flash over it then?
I have CM 7 and i did factory reset and wiped data and also formated system before i flashed 2.3.4 firmware
After factory-reset everything was fine with 2.2.1 (as this version can be fine)? And then you flashed gingerbread and it stuck. flashed by Odin? Or used ROM Manager?
Did you get it going?
i can boot with 2.3.4 firmware(flashed fuzonoidv3)but with cm7.1 and 7.2 im stucked with android letters :S
dont know y!!! cm7 depends on the connection u are using....im using bsnl nd cm7 wont work for me...bt whn i use a different connection i works!!!
what connections are u talking about? i only know that i can flash all roms except cm7(i let phone to boot for 1 night still nothing it just heated) pls help me if u know how i would be thankful
Hi guys,
i've a samsung p6200 and i was running on ics 4.0.4 austria, then i've tried to move to P6200/P6210/T869 CyanogenMod 10 using cwm recovery.
so, since then i couldn't install any other rom without bootlooping.
I tried putting back ICS (previous version) using odin like i did before, it completes without errors but i get stuck on galaxy logo.
I tried several ways of flashing through cwm and heimdall, all go through but end up with the same results :S
Can i get some help? I'm kinda lost here and don't know what to try next.
Thanks in advance.
xzard said:
Hi guys,
i've a samsung p6200 and i was running on ics 4.0.4 austria, then i've tried to move to P6200/P6210/T869 CyanogenMod 10 using cwm recovery.
so, since then i couldn't install any other rom without bootlooping.
I tried putting back ICS (previous version) using odin like i did before, it completes without errors but i get stuck on galaxy logo.
I tried several ways of flashing through cwm and heimdall, all go through but end up with the same results :S
Can i get some help? I'm kinda lost here and don't know what to try next.
Thanks in advance.
Click to expand...
Click to collapse
Reinstall cwm, wipe data, install cm9/10, wipe data again, reboot. Don't wipe data using stock recovery, only cwm
Sent from my myTouch 4g via Tapatalk
ringnutz said:
Reinstall cwm, wipe data, install cm9/10, wipe data again, reboot. Don't wipe data using stock recovery, only cwm
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
i reinstalled cwm , wiped data :
-- wiping data...
formatting /data...
error mounting /data!
skipping format...
formatting /cache...
formatting /sd-ext...
formatting /sdcard/.android_secure...
error mounting /sdcard/.android_secure...!
skipping format...
data wipe complete.
then when i go to choose zip from sd card it gives me " E:Can't mount /sdcard
or if i try choose from internal sdcard : "E:Can't mount /emmc/
Can u please help me ...
thank you in advance
xzard said:
i reinstalled cwm , wiped data :
-- wiping data...
formatting /data...
error mounting /data!
skipping format...
formatting /cache...
formatting /sd-ext...
formatting /sdcard/.android_secure...
error mounting /sdcard/.android_secure...!
skipping format...
data wipe complete.
then when i go to choose zip from sd card it gives me " E:Can't mount /sdcard
or if i try choose from internal sdcard : "E:Can't mount /emmc/
Can u please help me ...
thank you in advance
Click to expand...
Click to collapse
Your EMMC is gone, tipical hard brick ! look at releated thread ....
It's possible you have executed a "Factory reset" from ICS recovery before ?
losteagle said:
Your EMMC is gone, tipical hard brick ! look at releated thread ....
It's possible you have executed a "Factory reset" from ICS recovery before ?
Click to expand...
Click to collapse
i tryed so many options thant i don't remember i've executed that from ICS...
but now the only thing i can access on my TAb is the dowload mode cause if i try recovery gives the mensage " firmware upgrade encountered an issue"
and if i try to flash ICS again with odin it hangs on move to FACTORYFS.IMG and appears the fail menssage on odin.
any kind of help pleasee!???
thanks in advance
xzard said:
i tryed so many options thant i don't remember i've executed that from ICS...
but now the only thing i can access on my TAb is the dowload mode cause if i try recovery gives the mensage " firmware upgrade encountered an issue"
and if i try to flash ICS again with odin it hangs on move to FACTORYFS.IMG and appears the fail menssage on odin.
any kind of help pleasee!???
thanks in advance
Click to expand...
Click to collapse
Right now i've downloaded samfirmware pit file and tryed to flash ICS with that pit file selected and repartition too...
i've succeed to finishing the installation and now i can access to stock recovery. but when i try to turn tab on it hangs on galaxy tab logo !
any idea?
thanks in advance
Have a look at this thread, should work for our device as well
http://forum.xda-developers.com/showthread.php?t=1667886
from my myTouch 4g via Tapatalk
Hi,
After a weekend lost searching for a fix to my problem I've decided to take the Tab to repair at the dealer. my tab has an insurance and i will activate it.
for a small resume, i've scanned for partition errors, having received I/O error on mmcblk9 / 10 / 11.
i tried re-partition without success
at last i 've flashed my tab with pit file modified for devices who have bad sector issues and i nearly succeeded, because get an ICS boot but gave me a message that need to do a data wipe because of some encryption. when i made the wipe with the CWM recovery i get mount /data and /sdcard error...
so once that i have insurance i'll use it .
the bad news is that it can take up to ninety days, i'll prai that does not happen and take much less time.
tks
Hi i have Moto Maxx 64 GB.... Today i was trying to flash newly released RR rom. When i booted my phone to TWRP Recovery.... it gives an error in logs that
unable to mount /data
unable to mount /cache
unable to mount /firmware
unable to mount /system
Now after erasing cache and userdata from fastboot and then reboot in to recovery data and cache partitions are back but firmware and system partitions are same saying unable to mount /system....
Help needed please
Hi,
Flash stock brazil 5.0.2 firmware with rsd lite, it will be fine.
Can you please give the download link???
https://drive.google.com/file/d/0B8ENz9WTAsk_WFprNVF1RFRFSUk/view
http://forum.xda-developers.com/droid-turbo/development/moto-maxx-moto-turbo-xt1225-factory-t3078274
Stilll no solution... rsd lite fails on 10% and when i flash twrp recovery its now saying unable to mount /firmware........Seems any expert opinion is required or maybe last solution is jtag.....
You cant boot twrp on read-only mode, just swipe when it starts (dont click on read-only option)
You will need to be more specific with the RSD error - it should have no problem fully recovering the phone with stock firmware.