well the other day i flashed 2.3.6 4g firmware on to my i9003
using the mobile odin pro
my firmware was 2.2.1
im not sure why i did that but i did so yeah....
so now when i try to turn my phone on it gets stuck on the samsung logo, is there any way of fixing this? and also my pc didnt recongize my phone, when it worked maybe i didnt have the right usb driver installed?
please comment to help me out
Make a hard reset by
VolumeUp+homekey+power button Wipe data
Reboot
For usb driver,try this
http://forum.xda-developers.com/showthread.php?t=1879783
Hope it will helps
Sent from my GT-I9003 using xda premium
Which phone firmware did u flash ?
Sent from my GT-I9003 using xda premium
actually it was 2.3.5
i downloaded it from this link http://forum.xda-developers.com/showthread.php?t=1343881
Go to Odin then flash KPE with re partition checked twice then flash or your favorite ROM without re partition checked. It might solve ur problem
hard reset dont work
rockybb96 said:
hard reset dont work
Click to expand...
Click to collapse
Well, Is it going to download mod ( Volume Down + Home + Power Button ) ???
rockybb96 said:
well the other day i flashed 2.3.6 4g firmware on to my i9003
using the mobile odin pro
my firmware was 2.2.1
im not sure why i did that but i did so yeah....
so now when i try to turn my phone on it gets stuck on the samsung logo, is there any way of fixing this? and also my pc didnt recongize my phone, when it worked maybe i didnt have the right usb driver installed?
please comment to help me out
Click to expand...
Click to collapse
Hi!
If you can go to download mode (vol.down+home button+power button), then flash any stock firmware right away if you cannot go to download mode, use a usb jig. Go to sammobile.com for all your stock firmware downloads
I hope this will help you
Sent from my GT-I9300 using xda premium
Related
Hi ! by mistake and installed a bootloader incompatible with my galaxy S, now will not start, no download mode, no recovery .... : (
Please help me
if your phone can't go into download mode, the only option is the USB Jig Method. This video will help you http://tinyurl.com/6wb9c5l
Click Thanks if my post helped you
But this work 100% ??, the error is when i flashing other bootloader...
should work in this case ??
PS.: the link don't work
try this link http://www.youtube.com/watch?v=Rdn5GoRjhn0 ...whatever you have done that caused your phone to be bricked, the only solution is the jig method or you could go to any service center...but if you can still go to download mode, then there is no problem...
Click Thanks if my post helped you
Usb jig works 100% . Tested on galaxy s , s2 , ace, nexus s
Sent from my GT-I9000 using xda premium
you can also view this link http://code.google.com/p/android-roms/wiki/Unbrick and read other methods of unbricking your phone.
Used the mutilated USB cable jig and worked. You should try that.
Sent from my GT-I9000 using XDA Premium App
Umm... guys... the thread was moved here.
will this work on galaxy sl tooo..
and after getting an usb jig what to do
Finally, the last week i send the phone to SAT...
When i go to the shop to take the phone, the shopgirl says I can not fix ...
When i arrives to my home... i try "Volume down + Home + Turn on, and the download mode appears !!!
i was on ported ROM From Galaxy Mini and bricked ... i can go to download mode
i can't flash any firmware froyo or GB Odin stuck on setupconnection
i tried both Froyo and GB one package .....
i tried changing usb cable .. changing pc ... reinstallin latest drivers
but nothing ...
Please help me ...
i think the guy who installed the Custom rom for me ... installed The Stock Firmware of Galaxy Mini
Galaxy Mini S5570 screen is appearing in booting before samsung boot animation !!!!
Bro! Rename ur ops file exactly to "BENI_v1.0.ops"(without quotes). Hence, Odin will detect ur FIT & you'll b able to update it:thumbup:
Sent Via XDA™ Premium
Galaxy_Rohit said:
Bro! Rename ur ops file exactly to "BENI_v1.0.ops"(without quotes). Hence, Odin will detect ur FIT & you'll b able to update it:thumbup:
Sent Via XDA™ Premium
Click to expand...
Click to collapse
it is already with this name !!
Master-ZizO said:
it is already with this name !!
Click to expand...
Click to collapse
When I got into ur same prob. I first flashed this FROYO 2.2.1 DDKB1, rebooted my phone, went to download mode again by pressing Home+Vol.Down+Power. Then flashed this Gingerbread 2.3.6 DDKT3 via Odin. Then I wiped data/cache via stock recovery(Home+Power) & my phone successfully booted with Gingerbread 2.3.6.
Btw I installed this SAMSUNG mobile drivers.
If still facing issues, then try a different computer.:thumbup:
Edit: Also uninstall kies, antivirus, firewall(recommended) & make sure that USB debugging is enabled(Hope u already have enabled)
Hope this helps...!!!
Sent Via XDA™ Premium
Galaxy_Rohit said:
When I got into ur same prob. I first flashed this FROYO 2.2.1 DDKB1, rebooted my phone, went to download mode again by pressing Home+Vol.Down+Power. Then flashed this Gingerbread 2.3.6 DDKT3 via Odin. Then I wiped data/cache via stock recovery(Home+Power) & my phone successfully booted with Gingerbread 2.3.6.
Btw I installed this SAMSUNG mobile drivers.
If still facing issues, then try a different computer.:thumbup:
Edit: Also uninstall kies, antivirus, firewall(recommended) & make sure that USB debugging is enabled(Hope u already have enabled)
Hope this helps...!!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Odin already detect my mobile but stuck on setupconnection
i tried aslo Froyo but still stuck too..
But One Question ... Galaxy Mini S5570 screen is appearing in booting before samsung boot animation !!!!
it can means that my friends installed Galaxy mini Firmware to Me and bricked bootloader! .. is that possible ?
It might be... So, the Froyo file I mentioned does have bootloader in it... Place them in given order:-
OPS:-BENI.........
BOOT: APBOOT.........
PHONE: MODEM...........
PDA: CODE..............
CSC: CSC............
Note:Remove sim card & memory card b4 the Odin flash.
However if it still gives GALAXY MINI boot screen after successful flash of given froyo file, then u might b left with no choice...but there will still b some ways left then which I want you to give them a try b4 handing it to SSC(last choice)
Sent Via XDA™ Premium
Galaxy_Rohit said:
It might be... So, the Froyo file I mentioned does have bootloader in it... Place them in given order:-
OPS:-BENI.........
BOOT: APBOOT.........
PHONE: MODEM...........
PDA: CODE..............
CSC: CSC............
Note:Remove sim card & memory card b4 the Odin flash.
However if it still gives GALAXY MINI boot screen after successful flash of given froyo file, then u might b left with no choice...but there will still b some ways left then which I want you to give them a try b4 handing it to SSC(last choice)
Sent Via XDA™ Premium
Click to expand...
Click to collapse
i think i can be solved with Samsung Box & Flash Tool
will try to remove sim & sdcard
All sugestions failed .. going to SSC
Master-ZizO said:
All sugestions failed .. going to SSC
Click to expand...
Click to collapse
did you try USB JIG?
Hello,
Am new on this forum, and basically new at android operative system. So I wanted to root my Samsung Galaxy Young GT-S6310 via Odin and I got PASS! But afterwards I couldn't enter CWM by pressing Vol+ Home Power button...Phone wasn't practically rooted but it was still working fine.
But after two days I thought of resetting it to STOCK and I used the option in Samsung settings. After the phone restarted and tried to boot up, the screen froze and it couldn't load further. Practically I cannot do anything because OS is not loading.
I have access to Vol- Home Power but I tried many tar files tru Odin to replace but i failed.
Can ANYONE help me out with this please? I just wanna make the phone work again.
Thanks A LOT in advance!
hello buddy
go to sammobile download a stock rom for your device then on your phone enter download mode and flash stock rom thru odin
try this and tell me what u get
good luck
Sent from my GT-S6312 using XDA Free mobile app
Hello bud. While i was waiting for any answer (even before yours) i used some tar.md5 thru Odin and luckly somehow got to use it normally again. Then i used kies n return my device to stock and after dat wiped all my data ...phone works fine now all good...but i would still like to root my s6310. Any idea?
Thanks for ur first post tho.
Newbee android said:
Hello bud. While i was waiting for any answer (even before yours) i used some tar.md5 thru Odin and luckly somehow got to use it normally again. Then i used kies n return my device to stock and after dat wiped all my data ...phone works fine now all good...but i would still like to root my s6310. Any idea?
Thanks for ur first post tho.
Click to expand...
Click to collapse
For rooting use an app named "framaroot" install this app on your phone and open it and set it to install superuser (super su is not recommended) and select gandalf exploit if u get a success reboot your device
Here is a link for framaroot: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
Good luck
Press thanks if i helped ..sent from my galaxy note 8.0
I tried flashing original firmware with odin. It said failed so i unplugged the usb. I went back on my tablet and it said "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". My tablet is a Samsung galaxy note 10.1 gt n8010. I need help because kies wont recognise my device so i dont get emergency code. Please helpp!!!! Thnx
soyuz4u said:
Try rebooting in download mode and then flash again. If that doesnt work then try downloading again. May be a broken firmware.let me know what happens.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your help I managed to flash a stock firmware.
Hi,
Thanks for using XDA Assist Since your issue is solved i will be closing this thread
Thread Closed Thanks
Hi all. I have problem with "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not blue status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help? Also tried Odin old versions, almost all show "nand error write". Tried also repartition with pit file, "there is no pit partition" error message. Looks like problem with emmc, but why. No one tried to flash. Just want to be sure before order nand flash.
When flash in old version Odin, then I see a little blue status bar on tablet. But flashing finish with error.
Maybe someone know, if to change nand chip not flashed but empty or with another firmware will the tablet flash it?
same problem with my GT-P3100,.
eboyenoki said:
same problem with my GT-P3100,.
Click to expand...
Click to collapse
Maybe I can help you
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Maybe I can help you
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
The trouble for my GT-P3100 now just shown "Firmware upgrade encountered an issue. Please select . .. . . . ." and i can't going to download mode, and i have try to install CWM or Official Recovery and also official ROM JB and ICS, but still the same even the odin shown Pass. Thanks for your help Mr Shsagnik.
eboyenoki said:
The trouble for my GT-P3100 now just shown "Firmware upgrade encountered an issue. Please select . .. . . . ." and i can't going to download mode, and i have try to install CWM or Official Recovery and also official ROM JB and ICS, but still the same even the odin shown Pass. Thanks for your help Mr Shsagnik.
Click to expand...
Click to collapse
Have you tried using heidmall? Try to Google on how to use it to unbrick your tab
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Have you tried using heidmall? Try to Google on how to use it to unbrick your tab
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Ok, I will try, thanks again for fast reply..
shsagnik said:
Have you tried using heidmall? Try to Google on how to use it to unbrick your tab
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Thanks again for your help Mr Shsagnik.. but i need more advise from you..
I already use heimdall and can't fix it also,, So this maybe for extra information
1. When I charge that P3100, " Firmware upgrade encountered an issue. Please select ..... " appear on screen, and if i charge about 1 or 2 hours, i feel the heat from main PCB / Mother Board, not for battery.
2. So I pull out battery for along time, and i try to charge with power bank with 2 mA output, and i not feel the heat from battery and also from main PCB, so I let this battery to charge about 3 hours, and i can see that battery charging on the screen, i try to going to download mode but still cant,so i wait until that battery charge full 100%. And finally, now I can going to download mode perfectly.
3. After that I try to install stock rom original ICS with ODIN v3.07, with re-partition not checked, the installation in ODIN succes, but on tablet there is no status bar below the download mode information, and after that my tabs not reboot also, so i try to go to download mode again and I stuck with " Firmware upgrade encountered an issue. Please select ..... " again... and then back to number one, now i try to fully discharge that battery, maybe you have any advise for me,,,
Thanks before.
----------------------------------------------------------------------------------------------------------------------------------------------------
Every little good thing that you do, it will be very meaningful for the them.
If you can't make anybody else happy, please don't hurt them