Related
Please help, my LG Optimus One won't even start anymore - I was using KDZ Updater and an error came up, I turned it off and tried to turn it back on, but nothing happens - it doesn't do anything, I press the button and nothing happens.
Take it to the warranty service. Tell them that you tried to update the firmware via official lg tool and something went wrong.
Sent from my LG-P500 using XDA Premium App
Acoole said:
Please help, my LG Optimus One won't even start anymore - I was using KDZ Updater and an error came up, I turned it off and tried to turn it back on, but nothing happens - it doesn't do anything, I press the button and nothing happens.
Click to expand...
Click to collapse
have u tried this http://forum.xda-developers.com/showthread.php?t=883314
and get some info on setting the drivers and stuff here http://forum.xda-developers.com/showthread.php?t=1038338
KDZ Updater guide
Acoole said:
Please help, my LG Optimus One won't even start anymore - I was using KDZ Updater and an error came up, I turned it off and tried to turn it back on, but nothing happens - it doesn't do anything, I press the button and nothing happens.
Click to expand...
Click to collapse
I cant help u out in this situation u should contact to LG but prefer u that in future if u faced any of this situation dont disconnect ur phone in EMERGENCY MODE, if in case of any error while updating or downgrading then at the same time restart KDZ Updater and flash ur phone with a working rom. (Officially available by LG)
Bhawan
Anyone have any other fixes for this? Can't send back to LG as I bought it off eBay.
Acoole said:
Anyone have any other fixes for this? Can't send back to LG as I bought it off eBay.
Click to expand...
Click to collapse
Still get it to LG service they will service it , and will charge you.
Sent from my LG-P500 using XDA Premium App
Resurrect your P500
Acoole said:
Anyone have any other fixes for this? Can't send back to LG as I bought it off eBay.
Click to expand...
Click to collapse
- don't worry , stay calm i brick'ed my phone like 50 times, i brick'ed so bad it diden't want to start, power button was usless.
TRY this:
- remove battery , while holding the UP volume key and back button connect it to PC via USB Emergency mode should apear , then open KDZ and install via 3GQCT and EMERGENCY an original/stock firmware ( Froyo 2.2.2 v10E.kdz http://www.4shared.com/file/O3Nw1b4s/V10E_00.html )
- after KDZ finishes an animation will apear , then you must put back the battery.
- things that you may encounter , errors in KDZ , phone fails to start after KDZ resets it , KDZ successfully installs rom and powers off phone when you power on phone it stopps at Android logo, sometimes the android logo animation work's and lags for 2 3 seconds (do a battery pull, put it back then power on the phone if it lags then you must reflash) , you must do a battery pull, connect usb without battery and chose DIAG in KDZ, reflash.
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
you can install Froyo 2.2.2 v10E.kdz
>>> http://www.4shared.com/file/O3Nw1b4s/V10E_00.html <<<
sorry for my bad english.
be patient !!
LE: when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i dident saw any difference.)
il tried the hold Up and hold Back button, but nothing happen, the screen is black no emergency mode
help please !!
memeru said:
il tried the hold Up and hold Back button, but nothing happen, the screen is black no emergency mode
help please !!
Click to expand...
Click to collapse
You should hold both buttons by one hand using 2 fingers and simultaneously connect it to pc through usb cable to enter into emergency mode..its a bit tricky..just by only pressing two button nothing will happen.
Sent from my LG-P500 using xda premium
xzet2 said:
- don't worry , stay calm i brick'ed my phone like 50 times, i brick'ed so bad it diden't want to start, power button was usless.
TRY this:
- remove battery , while holding the UP volume key and back button connect it to PC via USB Emergency mode should apear , then open KDZ and install via 3GQCT and EMERGENCY an original/stock firmware ( Froyo 2.2.2 v10E.kdz
- after KDZ finishes an animation will apear , then you must put back the battery.
- things that you may encounter , errors in KDZ , phone fails to start after KDZ resets it , KDZ successfully installs rom and powers off phone when you power on phone it stopps at Android logo, sometimes the android logo animation work's and lags for 2 3 seconds (do a battery pull, put it back then power on the phone if it lags then you must reflash) , you must do a battery pull, connect usb without battery and chose DIAG in KDZ, reflash.
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
you can install Froyo 2.2.2 v10E.kdz
>>> <<<
sorry for my bad english.
be patient !!
LE: when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i dident saw any difference.)
Click to expand...
Click to collapse
Nothing happens. Can I try anything else before I take it to LG Service Center?
P.S: Removed the URLs as XDA would not allow me to post.
Just go to the service, i had this problem twice , but i just go to the LG service and they changed my phone mainboard
Yeah. That's what they said to me too. Will be a week without my phone now.
well my warranty has been over
so normally send to service center they will charge right ?
furthermore, almost everytime flash to v20g (gingerbread official ROM) my phone sure can't turn on
so flash back to v10g (froyo official ROM) then said something param error, and my phone matter how I turn on also black screen
which either turn on in emergency mode (back + volume up + power), factory reset (volume down + home + power) and normal turn on phone
try charge the phone also no respond
Refer this THREAD..!!
Might help.
rr0yy said:
Refer this THREAD..!!
Might help.
Click to expand...
Click to collapse
tried already
as I said can't even turn on into emergency mode
Then you have no other choice then to go to LG Service Center.
Find one with JTAG.. it will cost you less. Otherwise it will be costly!!
rr0yy said:
Then you have no other choice then to go to LG Service Center.
Find one with JTAG.. it will cost you less. Otherwise it will be costly!!
Click to expand...
Click to collapse
what is JTAG ? mind explain ?
and my warranty has been over
they normally will charge right ?
I will explain you in a simple way.. when you do a hard brick, you actually corrupt the IC data.
The main IC ( processor) on the board is a programmed one. (We used to program basic 8085 and 8086 processors which used to be a big pain).
So when you hard brick a device.. there is no other option than to change the board (PCB).
But if there is someone well experinced with JTAG.. they can reset and re-program it again.
And it will cost you less than replacing the board.
Not all Service Centre do JTAG though.. hope you find one!!
Yes.. they will charge you!!
did ur fone goes to offline charging mode still?? if yes playing a little wid kdz updater can bring ur fone bak. if nt go for service cntres.
rr0yy said:
I will explain you in a simple way.. when you do a hard brick, you actually corrupt the IC data.
The main IC ( processor) on the board is a programmed one. (We used to program basic 8085 and 8086 processors which used to be a big pain).
So when you hard brick a device.. there is no other option than to change the board (PCB).
But if there is someone well experinced with JTAG.. they can reset and re-program it again.
And it will cost you less than replacing the board.
Not all Service Centre do JTAG though.. hope you find one!!
Yes.. they will charge you!!
Click to expand...
Click to collapse
thanks
hope they charge cheaper @@
navz000 said:
did ur fone goes to offline charging mode still?? if yes playing a little wid kdz updater can bring ur fone bak. if nt go for service cntres.
Click to expand...
Click to collapse
can't, use either computer or AC charger also nothing
Guys ,
i was flashing a rom
everything was fine but when i choose to reboot the device
it never waked....
tried odin method also
reinstalled the usb drivers but no luck
i just can boot into emergency download mode ( vol up + vol down +home + power)
odin recognizes me at that mode
but stucks at setup connection ....
PLZ HELP !!!!
As per my knowledge if you can go to download mode its a soft brick. And are you flashing through one package if yes then don't use all four file and then try to flash
Sent from my GT-S5670 using xda premium
asad007 said:
Guys ,
i was flashing a rom
everything was fine but when i choose to reboot the device
it never waked....
tried odin method also
reinstalled the usb drivers but no luck
i just can boot into emergency download mode ( vol up + vol down +home + power)
odin recognizes me at that mode
but stucks at setup connection ....
PLZ HELP !!!!
Click to expand...
Click to collapse
what the f***!..
oh man,hope u revive it soon!...
if its under warranty then please contact Customer Care!..
which ROM were u flashing?
galaxy fit + Chocobreadv1.2+ 768Mhz
it has bricked the second time
it's not under warranty
and i've tried one package option and also the 4 files
asad007 said:
it has bricked the second time
it's not under warranty
and i've tried one package option and also the 4 files
Click to expand...
Click to collapse
Then change your Signature......... If not then buy a new device or Change your motherboard
THanks a ton
like i never knew it
and btw i'm still working on it
but i can't only test it
asad007 said:
THanks a ton
like i never knew it
and btw i'm still working on it
but i can't only test it
Click to expand...
Click to collapse
If you can go to the emergency download mode their is a method to unbrick phone
Maybe try this?
http://forum.xda-developers.com/showthread.php?t=751265
Also what were you flashing?
Hello, I don't mean to hijack your thread but I am unable to go into download mode on my phone too. I have been using CM 7.2 rc2 and CWM recovery. I need to flash the original firmware through odin to go back to the factory GB. Can anyone please tell me what I am doing wrong?
asad007 said:
i just can boot into emergency download mode ( vol up + vol down +home + power)
odin recognizes me at that mode
but stucks at setup connection ....
PLZ HELP !!!!
Click to expand...
Click to collapse
i think download mode is just vol down+home+power .... no vol up
Yes But Asad007 has said he was unable to go into normal download mode and instead tried to use the emergency download mode Which I think cannot be used to flash New Firmware....
i was just wandering around and i found this thread
hmm interesting....
I have exactly the same problem like you,odin find me only when i press volume up+ menu+ power wich is dump mode from what i know.
I buy a Usb Jig now i wait to receive it ,i think is the las thing that i can do ,then i will send to samsung warranty to replace the motherboard ,will see if will do that.
This is a hard brick so no method listed here don`t work because the screen is dead and computer see it only if you use dump mode
Freedomalfa said:
I have exactly the same problem like you,odin find me only when i press volume up+ menu+ power wich is dump mode from what i know.
I buy a Usb Jig now i wait to receive it ,i think is the las thing that i can do ,then i will send to samsung warranty to replace the motherboard ,will see if will do that.
This is a hard brick so no method listed here don`t work because the screen is dead and computer see it only if you use dump mode
Click to expand...
Click to collapse
USB Jig doesnt support
As some of you speak of changing motherboard ... does such procedure cost much? Or do you guys all make this via warranty?
i believe it's all covered under the warranty.
though i doubt that they actually change the motherboard.
asad sir i know i m noob here but i have an suggetion my phone alsdid this and my comp. was not recognizing that then i tried from other computer and it worked i hope this would surely help you........
and if work than plz press thnx cz it wld be first thnx for me......
If your phone has bricked try using riff box jtag.
Sent from my GT-S5670 using xda premium
1784-'85 sitegic
i have the same problem an nothing in here solves it, the phone screen is black an does nothin when u press power+ vol down + home, will try the riff box jtag maybe it will work
Gharo said:
i have the same problem an nothing in here solves it, the phone screen is black an does nothin when u press power+ vol down + home, will try the riff box jtag maybe it will work
Click to expand...
Click to collapse
i have the same problem like yours... any button combination wont bring back to life my phone... i think thats the hard brick.... when you can enter to odin its soft brick... is usb jig method applicaple for this problem??
I dunno if my G3 has bricked or not, but it can't be Booted.
It is not even showing Charging screen.
Is it Soft bricked or Hard bricked ?
Should I take it to Samsung Service Center ?
Did you tried Menu button+Power button+ Volume up & down combination?
Press them all at once for a while...
harry1995 said:
Did you tried Menu button+Power button+ Volume up & down combination?
Press them all at once for a while...
Click to expand...
Click to collapse
I tried all such combinations.
It was stuck at G3MOD logo, so I tried to rebooted, but it then didn't reboot.
Vaibhav.Adsul said:
I tried all such combinations.
It was stuck at G3MOD logo, so I tried to rebooted, but it then didn't reboot.
Click to expand...
Click to collapse
shut the the phone by taking the battery out, put it back in, boot into download mode (vol- , menu, power button), and reflash the rom. If the download mode doesn't show up, then I think your phone is probably hard-bricked....
I think it's gone......
Jason-EX said:
shut the the phone by taking the battery out, put it back in, boot into download mode (vol- , menu, power button), and reflash the rom. If the download mode doesn't show up, then I think your phone is probably hard-bricked....
Click to expand...
Click to collapse
Nothing can be done for my phone.
Can't go into download mode, recovery mode.
Charging for 4 hours, but no response.
Tried "unsoft brick", but phone doesn't get detected (obvious it is ).
I'll visit Samsung Service center tomorrow, let's see what happens.
Before all this happenings: I flashed G3MOD 2.3 OC. Wiped Cache and dalvik, rebooted, but during this it got stuck at G3MOD screen for a long, which is unexpexted. So I rebooted once again, but it never....
Vaibhav.Adsul said:
Nothing can be done for my phone.
Can't go into download mode, recovery mode.
Charging for 4 hours, but no response.
Tried "unsoft brick", but phone doesn't get detected (obvious it is ).
I'll visit Samsung Service center tomorrow, let's see what happens.
Before all this happenings: I flashed G3MOD 2.3 OC. Wiped Cache and dalvik, rebooted, but during this it got stuck at G3MOD screen for a long, which is unexpexted. So I rebooted once again, but it never....
Click to expand...
Click to collapse
Then it's a hard-brick obviously.....and yes, I think you'll have to go to the service center. By the way, I remember a thread that talks about 'unhardbrick' g3, try to search for it, it may help a lot!
Confirmed: Hard Bricked.....
I visited Samsung Service Centre. Motherboard needs to be replaced. Cost ~90 $.
I'll better get a new phone.
Jason-EX said:
Then it's a hard-brick obviously.....and yes, I think you'll have to go to the service center. By the way, I remember a thread that talks about 'unhardbrick' g3, try to search for it, it may help a lot!
Click to expand...
Click to collapse
Lost a gud Droid...
I'll try that. Now I've a lot of time to do all such stuff...
Boot Loader
Can I do anything with Boot loader ?
Also if someone knows JIG or like that pls tell me. I didn't get that.
New Solution???
Is there any new solution to recover my device? Please! :crying:
Nope
VAMGDroidFan said:
I dunno if my G3 has bricked or not, but it can't be Booted.
It is not even showing Charging screen.
Is it Soft bricked or Hard bricked ?
Should I take it to Samsung Service Center ?
Click to expand...
Click to collapse
Seriously..
You cant brick i5801 .. i tried all stuff with it and somehow it works all the time.
Try JIG cable .
Hello,
My phone is stuck on LG logo and keeps blinking its key lights and then turning on and gets to the LG logo and does the same again and again, I can turn it on in emergency mode, so I tried to do a recovery, but all softwares don't detect it, except one time it was detected but not anymore.
Any help would be appreciated.
FuryCradle said:
Hello,
My phone is stuck on LG logo and keeps blinking its key lights and then turning on and gets to the LG logo and does the same again and again, I can turn it on in emergency mode, so I tried to do a recovery, but all softwares don't detect it, except one time it was detected but not anymore.
Any help would be appreciated.
Click to expand...
Click to collapse
Can you reboot into recovery? ( Power + Volume Up + Home ) Or fastboot? ( Power + Home )
shinobisoft said:
Can you reboot into recovery? ( Power + Volume Up + Home ) Or fastboot? ( Power + Home )
Click to expand...
Click to collapse
No, nothing but emergency mode
FuryCradle said:
No, nothing but emergency mode
Click to expand...
Click to collapse
Have you installed a custom recovery? If not, you should be able to do a factory reset. Power off the device. Press and hold both volume keys and the Power button for 10 seconds. This only works with factory recovery.
shinobisoft said:
Have you installed a custom recovery? If not, you should be able to do a factory reset. Power off the device. Press and hold both volume keys and the Power button for 10 seconds. This only works with factory recovery.
Click to expand...
Click to collapse
I did before, and I did root my hone and installed custom rom, but still my phone won't boot except into logo loop or recovery mode, Android Flash recovery detected the phone once, I selected by mistake reboot phone into normal mode, the software went unresponsive, I unplugged my phone and replugged it and now no software would detect it.
FuryCradle said:
I did before, and I did root my hone and installed custom rom, but still my phone won't boot except into logo loop or recovery mode, Android Flash recovery detected the phone once, I selected by mistake reboot phone into normal mode, the software went unresponsive, I unplugged my phone and replugged it and now no software would detect it.
Click to expand...
Click to collapse
Sounds like LGMDP or KDZ are about the only things that you can try at this point. With the phone booting to the LG Logo, it's not a permanent brick yet. I would try LGMDP before KDZ as KDZ has been known to brick devices. It's bricked two for me.
shinobisoft said:
Sounds like LGMDP or KDZ are about the only things that you can try at this point. With the phone booting to the LG Logo, it's not a permanent brick yet. I would try LGMDP before KDZ as KDZ has been known to brick devices. It's bricked two for me.
Click to expand...
Click to collapse
The problem is neither are detecting my phone now, they did before but now they don't, I have no idea why not :/
FuryCradle said:
The problem is neither are detecting my phone now, they did before but now they don't, I have no idea why not :/
Click to expand...
Click to collapse
Something has changed the way the devices are identified since ICS came out. Have you tried using either of those programs with the device boot-looping on the LG Logo? That will be about the only way the device is detected. You may get lucky enough to have LGMDP detect it. The only other option I know of is to visit a local cell shop that has JTAG equipment.
Uninstall all lg drivers, reinstall the latest drivers and try again after disabling lg modem from control panel-devices
Sent from my LG-P500
shinobisoft said:
Something has changed the way the devices are identified since ICS came out. Have you tried using either of those programs with the device boot-looping on the LG Logo? That will be about the only way the device is detected. You may get lucky enough to have LGMDP detect it. The only other option I know of is to visit a local cell shop that has JTAG equipment.
Click to expand...
Click to collapse
I thought so, thank you for your answers.
pmvyas said:
Uninstall all lg drivers, reinstall the latest drivers and try again after disabling lg modem from control panel-devices
Sent from my LG-P500
Click to expand...
Click to collapse
The device is boot-looping on the LG logo. There's not much of a chance of any drivers getting installed or at least the necessary ones.
Hey my Lg ms345 wont boot up.stuck at Lg logo screen or on the battery charging screen. I cant do any resets or modes.
hi guys
i flashed xperia S kernel to my nexus 5
and now my phone i think is dead!
fastboot is gone!!
i read all thread about bricked n5,but no one like my situatiuon!
now! what can i do??
pleasssse
You can't hardbrick your phone just with a kernel.
Can you boot into fastboot-Mode?
Sent from my Nexus 4 using Tapatalk
simmac said:
You can't hardbrick your phone just with a kernel.
Click to expand...
Click to collapse
You most certainly can.
aryalireza said:
hi guys
i flashed xperia S kernel to my nexus 5
and now my phone i think is dead!
fastboot is gone!!
i read all thread about bricked n5,but no one like my situatiuon!
now! what can i do??
pleasssse
Click to expand...
Click to collapse
If you've damaged or replaced your bootloader and the phone will not boot, all you can really do is send it to a service centre, so they can reflash the memory. I doubt very much there is anything you can do as a "home" user.
rootSU said:
You most certainly can.
Click to expand...
Click to collapse
HARDbrick with a kernel? Sure? I thought you can only do that while flashing a bootloader...
Sent from my Nexus 4 using Tapatalk
simmac said:
HARDbrick with a kernel? Sure? I thought you can only do that while flashing a bootloader...
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yeah, sure. Kernel control all sorts of things for the device, including the amount of electrical current sent to the hardware such as the digitiser, cpu etc. Flashing an incorrect kernel can literally fry the components.
Besides, he has damaged / lost / replaced his bootloader, which sounds like there is a problem that may not be rectified. He may even have flashed the kernel to the bootloader partition, who knows?
There is only one kind of brick. Hard brick / soft brick doesn't exist, despite what people say. It's either bricked or it's not. If this user can recover his device, it was not bricked. If he cannot, then it is. I will also include in the term "bricked" if it can be repaied, but only with industrial equipment available to a service centre,
aryalireza said:
hi guys
i flashed xperia S kernel to my nexus 5
and now my phone i think is dead!
fastboot is gone!!
i read all thread about bricked n5,but no one like my situatiuon!
now! what can i do??
pleasssse
Click to expand...
Click to collapse
Remove usb cable.
Press and hold power key for 20 secs
Release power key.
Press power key, volume_up key and volume_down key.
If the screen does not turn on then press power key for 20 secs.
Release power key.
Press and hold volume_up key while you connect the usb cable.
After connecting the usb cable you have to keep pressing volume_up key for 2-3 secs.
If the screen turns on follow my guide about lg flashtool. Link in my signature.
If the screen still remains black you have to claim your warranty. If you cant claim your warranty then you have to buy a new motherboard and replace it for yourslef or pay someone to buy a new motherboard and replace itnfor you or buy a new phone. JTAG is not possible, because every msm8974 soc comes with disabled JTAG. Your other option is to find the right connection for the emmc on the motherboard and solder wires to it between an sdcard adapdter.
bitdomo said:
If the screen still remains black you have to claim your warranty
Click to expand...
Click to collapse
This will not be covered by warranty. The only way to get this covered by warranty would be to not tell the truth, which is fraud. Any damage is purely the users fault and not a manufacturing defect,
rootSU said:
Yeah, sure. Kernel control all sorts of things for the device, including the amount of electrical current sent to the hardware such as the digitiser, cpu etc. Flashing an incorrect kernel can literally fry the components.
Click to expand...
Click to collapse
Okay, you're right.
rootSU said:
There is only one kind of brick. Hard brick / soft brick doesn't exist, despite what people say. It's either bricked or it's not. If this user can recovery his device, it was not bricked. If he cannot, then it is.
Click to expand...
Click to collapse
Yeah, I get your point, I see it like this: Soft"brick" is when a normal user (not users which are in this forums, but users which haven't heard about flashing and rooting) can't use his phone, for him it is literally a brick.
Hardbricked is when you have a damaged hardware/bootloader and not even the best "recoverer" in the forums can't fix the phone on software - layer.
Sent from my Nexus 4 using Tapatalk
simmac said:
Okay, you're right.
Yeah, I get your point, I see it like this: Soft"brick" is when a normal user (not users which are in this forums, but users which haven't heard about flashing and rooting) can't use his phone, for him it is literally a brick.
Hardbricked is when you have a damaged hardware/bootloader and not even the best "recoverer" in the forums can't fix the phone on software - layer.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yeah I see what you're saying. I just try not to see it that way. I prefer to talk in absolutes rather than perceptions
thank you guys,but i cant go to bootloader!
i just flash a zip kernel via philiz touch! and it's gone!
what can i do?
aryalireza said:
thank you guys,but i cant go to bootloader!
i just flash a zip kernel via philiz touch! and it's gone!
what can i do?
Click to expand...
Click to collapse
I told you everything you could do. There is nothing else.
bitdomo said:
Remove usb cable.
Press and hold power key for 20 secs
Release power key.
Press power key, volume_up key and volume_down key.
If the screen does not turn on then press power key for 20 secs.
Release power key.
Press and hold volume_up key while you connect the usb cable.
After connecting the usb cable you have to keep pressing volume_up key for 2-3 secs.
If the screen turns on follow my guide about lg flashtool. Link in my signature.
If the screen still remains black you have to claim your warranty. If you cant claim your warranty then you have to buy a new motherboard and replace it for yourslef or pay someone to buy a new motherboard and replace itnfor you or buy a new phone. JTAG is not possible, because every msm8974 soc comes with disabled JTAG. Your other option is to find the right connection for the emmc on the motherboard and solder wires to it between an sdcard adapdter.
Click to expand...
Click to collapse
i've done your instruction,but nothing happend!!
but when i pressed volume up and connect to pc,my pc recognize new driver of LG!
but nothing happend!
any solution?
If i remember right Xperia S's have kernel/recovery/bootloader all in one so you've probably overwritten the lot at once
aryalireza said:
i've done your instruction,but nothing happend!!
but when i pressed volume up and connect to pc,my pc recognize new driver of LG!
but nothing happend!
any solution?
Click to expand...
Click to collapse
There is no solution.
Ben36 said:
If i remember right Xperia S's have kernel/recovery/bootloader all in one so you've probably overwritten the lot at once
Click to expand...
Click to collapse
i think so,because bootloader is gone!
and nothing happend
if i just boot to fastboot everything going to normal and easy
Can you load the secondary bootloader (POWER + VOL UP + VOL DOWN)? If not, then it's hopeless. Why would you flash another device's kernel?
aryalireza said:
i think so,because bootloader is gone!
and nothing happend
if i just boot to fastboot everything going to normal and easy
Click to expand...
Click to collapse
Do you have insurance? Most bank accounts do have them as part of them. If so, throw it on the floor and claim for a new one. They won't bother replacing a smashed screen and damaged housing so they'll just send a new one out ?
Ben36 said:
Do you have insurance? Most bank accounts do have them as part of them. If so, throw it on the floor and claim for a new one. They won't bother replacing a smashed screen and damaged housing so they'll just send a new one out ?
Click to expand...
Click to collapse
That's still fraud.
Send it for repair and own up to what you did. Surely flashing the memory via a service centre is not an expensive endeavour.
Edit: geez,Ignore the post, didn't read the later pages.
rootSU said:
That's still fraud.
Send it for repair and own up to what you did. Surely flashing the memory via a service centre is not an expensive endeavour.
Click to expand...
Click to collapse
Mehh if you throw it on the floor you'd have to claim on insurance so nerr ?