Database Info

note 10.1 GT-N8010 jellybean update?

anyone Know when the Jellybean update will be available for this? the OTA one meaning official

buffblueyes said:
anyone Know when the Jellybean update will be available for this? the OTA one meaning official
Click to expand...
Click to collapse
There is an official out right now,if you are waiting for your specific country update,who knows? I have a canadian n8010 and sammobile dosen't even show a firmware at all on their site,ICS or JB so i'm getting these official updates the long way.If you are waiting for OTA it could be forever in the world of electronics.Do a nandroid backup(that way you will have a copy of exactly what you started with)then you can do anything after and always be able to go back if and when an official for your country is released.Hope this helps.
http://forum.xda-developers.com/showthread.php?t=2048213

Thanks for the reply. Prob be a while before its released over here as were never first
Sent from my GT-I9300 using xda premium

Still on ICS here in the UK with8010 wifi only version. Any news on 4.1 in the UK?
Sent from my GT-N8010 using XDA Premium HD app

krmurphy said:
Still on ICS here in the UK with8010 wifi only version. Any news on 4.1 in the UK?
Sent from my GT-N8010 using XDA Premium HD app
Click to expand...
Click to collapse
See Post Two .
jje

There's now two full 411 builds for the n8010 wifi note10 on sammobile.
The lk9 dbt rom contains the csc for the uk devices.
Regions supported are : Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
It works fine on my btu (uk) device without changing csc
There is also a ll3 rom for china/hk which is a lot newer build, not tested it though.

Is the update coming soon???? As it now sais access to the software update is provided to the users in which they request it try again later. Summit along them lines it sais that
Sent from my GT-N8010 using xda premium

That just means the servers delivering the OTA update are overloaded. In the past when I have got that message on my SGS3, I have then managed to update through Kies. Otherwise, you may just need to wait a day or two till the servers are less loaded.

dmarchant said:
That just means the servers delivering the OTA update are overloaded. In the past when I have got that message on my SGS3, I have then managed to update through Kies. Otherwise, you may just need to wait a day or two till the servers are less loaded.
Click to expand...
Click to collapse
Ah right I have always wondered what it meant lol thanks for the info
Sent from my GT-N8010 using xda premium

Just updated through kies
Sent from my GT-N8010 using xda premium

Thought it was gonna be 4.1.2 but its only 4.1.1
Sent from my GT-N8010 using xda premium

[i9500] Cant change firmwares anymore after flashing TTT MG9 firmware

Hi all, ive been meaning to try other stock firmwares but the only firmware that my phone recognizes is the MG9 version from TTT. Ive tried my previous firmwares and the newest ones from India and Thailand but its not working because my imei gets messed up. My phone originally came from South Africa.
Has someone experienced the same thing before? Were you able to fix it? Pls help. Thanks!

tclocki said:
Hi all, ive been meaning to try other stock firmwares but the only firmware that my phone recognizes is the MG9 version from TTT. Ive tried my previous firmwares and the newest ones from India and Thailand but its not working because my imei gets messed up. My phone originally came from South Africa.
Has someone experienced the same thing before? Were you able to fix it? Pls help. Thanks!
Click to expand...
Click to collapse
Simply flash the mg9 modem through odin or cwm after you flash a different firmware. You can find both .tar(odin) or .zip(cwm) files in the development section. It will fix the imei.
Cheers!!
Sent from my GT-I9500 using xda app-developers app

shamps said:
Simply flash the mg9 modem through odin or cwm after you flash a different firmware. You can find both .tar(odin) or .zip(cwm) files in the development section. It will fix the imei.
Cheers!!
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Wow great ill do that later. Although I havent needed to do that before until I flashed this TTT firmware.

Gs3 has the same problem after flashing latest firmware, it changes efs consistency. Not a big problem if you stay on the latest modem.
Sent from my GT-I9505 using xda app-developers app

[Q] Still waiting for 4.2.2 :(

I have A Galaxy s2 Plus NFC phone. The CSC is XEF (France). Since a year i have been waiting for sammobile or samsung-update to put up the updates firmware. Last i checked 5 minutes ago and can confirm that its not there yet. I have also tried OTA, but to no advantage. I am still using 4.1.1
Can I flash any other countries firmware on my 9105P? Like DBT(German) or any other one
Also let me know that if i flash german 4.2.2 firmware on my french phone, will i get modem or signal or any other issues? or flashing won't be possible at all???

Maisam.asif said:
I have A Galaxy s2 Plus NFC phone. The CSC is XEF (France). Since a year i have been waiting for sammobile or samsung-update to put up the updates firmware. Last i checked 5 minutes ago and can confirm that its not there yet. I have also tried OTA, but to no advantage. I am still using 4.1.1
Can I flash any other countries firmware on my 9105P? Like DBT(German) or any other one
Also let me know that if i flash german 4.2.2 firmware on my french phone, will i get modem or signal or any other issues? or flashing won't be possible at all???
Click to expand...
Click to collapse
U can flash other country firmware via odin without problems. I have flashed germany firmware
Sent from my GT-I9105P using XDA Premium 4 mobile app

Yes u can, but if u want to take advantage of ur warranty for repairing phone u need to reflash 4.1...

Cooetzee said:
Yes u can, but if u want to take advantage of ur warranty for repairing phone u need to reflash 4.1...
Click to expand...
Click to collapse
U can't reflash 4.2.2 to 4.1.2 cuz bootloader
Sent from my GT-I9105P using XDA Premium 4 mobile app

rs tony said:
U can't reflash 4.2.2 to 4.1.2 cuz bootloader
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not true you cn go back to 4.1.2
Sent from my GT-I9105P using XDA Free mobile app

Thanks all. I am downloading 4.2.2 DBT ROM now.

Maisam.asif said:
Thanks all. I am downloading 4.2.2 DBT ROM now.
Click to expand...
Click to collapse
Make sure you get the latest, XXUBNB1.

Kies doesn´t find the KitKat Update [GT-N8000]

I heard that the Note 10.1 2012 got finally the KitKat Update but Kies say that my firmware is allready the newest.

Are you sure Germany got the KitKat update? What about the device, does it find the update under About Device > Software Update? If not, you'll have to wait for Samsung to release the update in your country. And if your device is rooted or modded it won't update by itself, you'll have to do it manually.
Sent from my SCH-R760 using XDA Free mobile app

chrismin13 said:
Are you sure Germany got the KitKat update? What about the device, does it find the update under About Device > Software Update? If not, you'll have to wait for Samsung to release the update in your country. And if your device is rooted or modded it won't update by itself, you'll have to do it manually.
Sent from my SCH-R760 using XDA Free mobile app
Click to expand...
Click to collapse
I have the 4.1.2 Stock Rom and Germany was the first European Country who got the Update. But I´m not sure if the device is branded.

RabbidZ said:
I have the 4.1.2 Stock Rom and Germany was the first European Country who got the Update. But I´m not sure if the device is branded.
Click to expand...
Click to collapse
What do you mean that the device is branded? I'm not sure what it means. Sorry. What's your model number?
Sent from my SCH-R760 using XDA Free mobile app

That means the carrier has a lot of bloatware on the Phone (I dont see any), the bootlogo is the carrier logo( I dont have it) and many more.
I have the GT-N8000. Its in the Thread Title.

RabbidZ said:
That means the carrier has a lot of bloatware on the Phone (I dont see any), the bootlogo is the carrier logo( I dont have it) and many more.
I have the GT-N8000. Its in the Thread Title.
Click to expand...
Click to collapse
I'm in germany, and my GT-N8010 (Wifi version) seems willing to update via Kies. I saw on Sammobile that the new version is available. Have you checked there if the N8000 is already listed?

CommanderROR said:
I'm in germany, and my GT-N8010 (Wifi version) seems willing to update via Kies. I saw on Sammobile that the new version is available. Have you checked there if the N8000 is already listed?
Click to expand...
Click to collapse
yes is it.

What about sending it to Samsung for the update? They'd probably do it for you. If you can be without your tablet for a few days that's an alternative. Or you could manually flash somehow the frimware through Odin.
Sent from my SCH-R760 using Tapatalk 2

G920i 6.0.1 Update

Hi guys.
I have an 128gb S6 SM-G920i on 5.1.1 Australia Vodafone, baseband G920IDVU3DOL4 and I would like to get a 6.0.1 FW from Sammy (http://www.sammobile.com/firmwares/database/SM-G920I/).
I am using the phone in Ireland so I could not find an Irish or UK 6.0.1 FW to put on it. Loads of other 6.0.1 like Brazil, Chile, India, etc but I'm not sure what effect that will have if I install those.
Any suggestions on how I can get 6.0.1 on my S6 or do I need to wait for Samsung?

I have my s6 from Brazil that came to me with ZTO 5.11 . First I flashed inu 5.1.1 after that I got Ota for inu 6.0.1 and I did the update with no issues at all.
Now I flashed TTT because inu was a bit laggy. Not happy with battery at TTT tomorrow will flash ARO.
So I think you're safe to flash the firmware you want. But check first if is the correct model firmware
Sent from my SM-G920I using Tapatalk

chubutnet said:
I have my s6 from Brazil that came to me with ZTO 5.11 . First I flashed inu 5.1.1 after that I got Ota for inu 6.0.1 and I did the update with no issues at all.
Now I flashed TTT because inu was a bit laggy. Not happy with battery at TTT tomorrow will flash ARO.
So I think you're safe to flash the firmware you want. But check first if is the correct model firmware
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
So as long as it is a 6.0.1 FW of the G920i model it should be ok regardless of country?

Yes at least in my case I flashed several Different fw no matter country or csc
Sent from my SM-G920I using Tapatalk

chubutnet said:
Yes at least in my case I flashed several Different fw no matter country or csc
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
Awesome, my concern was that if I flash let's say the Brazil FW it won't have English menus. Is that a possibility?

sd_dracula said:
Awesome, my concern was that if I flash let's say the Brazil FW it won't have English menus. Is that a possibility?
Click to expand...
Click to collapse
The language depends on which one you choose after installing. Some firmwares have all languages and some have a few.
But all them have English. After flashing firmware , the phone boot and you have to set the language, accounts, fingerprints etc
Then everything on menus will show the language you've chosen
Sent from my SM-G920I using Tapatalk

chubutnet said:
The language depends on which one you choose after installing. Some firmwares have all languages and some have a few.
But all them have English. After flashing firmware , the phone boot and you have to set the language, accounts, fingerprints etc
Then everything on menus will show the language you've chosen
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
Nice.
And will I need to reinstall all apps or will all data still be there after upgrade?

sd_dracula said:
Nice.
And will I need to reinstall all apps or will all data still be there after upgrade?
Click to expand...
Click to collapse
You can make a backup of all you want with an application call smart switch you should install it on the pc.
Then make a factory reset. Flash the firmware and if you can make a factory reset again
The restore everything with smart switch
Sent from my SM-G920I using Tapatalk