Related
Is there any mods I can install on my phone, s off, rooted. Or do I need to flash certain ROM inorder to install mods like beats.
Sent from my HTC Sensation 4G using xda premium
jhobert said:
Is there any mods I can install on my phone, s off, rooted. Or do I need to flash certain ROM inorder to install mods like beats.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Hi,
The thing is to flash mods using the same base as your ROM.
If you check my sig , I have battery mods for ARHD base 2.3.4 and 2.3.5
Check with your ROM'S dev,to see which base you are using,and then flash the appropriate mod.
ALWAYS MAKE A NANDROID BACKUP BEFORE YOU INSTALL A MOD
For beats I installed THIS MOD ,because I am on base 2.3.5 using Sense 3.5
Or you could install ARDH 3.6.3 XE which contains beats anyway.
malybru said:
Hi,
The thing is to flash mods using the same base as your ROM.
If you check my sig , I have battery mods for ARHD base 2.3.4 and 2.3.5
Check with your ROM'S dev,to see which base you are using,and then flash the appropriate mod.
ALWAYS MAKE A NANDROID BACKUP BEFORE YOU INSTALL A MOD
For beats I installed THIS MOD ,because I am on base 2.3.5 using Sense 3.5
Or you could install ARDH 3.6.3 XE which contains beats anyway.
Click to expand...
Click to collapse
I'm still on stock tmobile us rom, I just came from arhd with no luck so I restored my phone to factory stock then s off and rooted.
Sent from my HTC Sensation 4G using xda premium
You can install anything you want, you just have to know what it is you want to do. Lets say you want to have beats audio (using the previous posters example). You know you have a stock ROM, version 2.3.4 most likely, so just find a beats audio only mod for 2.3.4 bases running Sense 3.0.
Or, as the previous poser says, you can install a whole ROM that already includes it. ARHD basically simulates a Sensation XE by removing the under-clocking on the CPU thats there stock bringing it up to 1.5 Ghz, adding beats audio, and overall just smoothing out the ROM. It looks the same as the stock ROM, it just works better.
The best thing to do is just make a backup of how it is now through recovery, then try stuff out and see what you like. You can always restore your backup and it will be right back to how it was before you did anything.
~T.J.
EDIT: Saw you came from ARHD. Sorry to hear about the bad luck. But yes, you can install mods without a full ROM.
02CWRX said:
You can install anything you want, you just have to know what it is you want to do. Lets say you want to have beats audio (using the previous posters example). You know you have a stock ROM, version 2.3.4 most likely, so just find a beats audio only mod for 2.3.4 bases running Sense 3.0.
Or, as the previous poser says, you can install a whole ROM that already includes it. ARHD basically simulates a Sensation XE by removing the under-clocking on the CPU thats there stock bringing it up to 1.5 Ghz, adding beats audio, and overall just smoothing out the ROM. It looks the same as the stock ROM, it just works better.
The best thing to do is just make a backup of how it is now through recovery, then try stuff out and see what you like. You can always restore your backup and it will be right back to how it was before you did anything.
~T.J.
EDIT: Saw you came from ARHD. Sorry to hear about the bad luck. But yes, you can install mods without a full ROM.
Click to expand...
Click to collapse
Yeah I did tried 3 of the most recent arhd Rom, it is smooth and fast but has too many glitches on my phone. I tried installing the recommended radio it does fixed my signal issue, but after 3 days of using my phone keeps goin on a black screen when somebody calls me or text me so I decided to revert to stock
Sent from my HTC Sensation 4G using xda premium
Interesting. Did you try turning the CPU back down to 1.2 GHz? I have ran 3.6.1 and only had one reboot before I switched to the beta kernel, never had any issues with 3.6.2 which came with the same kernel I upgraded to with 3.6.1, but I switched to bricked 0.91 kernel and its even better. Tried 3.6.3 and had a bunch of FC problems and issues so I restored back to 3.6.2.
Basically they all have worked well for me, but I've read of some people needing to stay at 1.2 GHz because of problems you have described.
Sent from my HTC Sensation XE with Beats Audio using XDA App
02CWRX said:
Interesting. Did you try turning the CPU back down to 1.2 GHz? I have ran 3.6.1 and only had one reboot before I switched to the beta kernel, never had any issues with 3.6.2 which came with the same kernel I upgraded to with 3.6.1, but I switched to bricked 0.91 kernel and its even better. Tried 3.6.3 and had a bunch of FC problems and issues so I restored back to 3.6.2.
Basically they all have worked well for me, but I've read of some people needing to stay at 1.2 GHz because of problems you have described.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I haven't tried restoring to 1.2ghz , I just restored my phone back to stock I got tired of trying all the versions and seems all of the versions I flashed had issues on my phone, don't get me wrong but I do love the speed and smoothness of arhd its just those fcs, unstable signal and not to mention the black screen issue. But like you said I haven't tried using different kernel I just used the one that came with the Rom and the other faux kernel that one of xda member suggested the beta 10. I even tried the insertcoin 3.3.9 and same issue with signal. I'm on tmobile carrier I don't know if that causes the signal issue with most of the Rom I flashed.
Sent from my HTC Sensation 4G using xda premium
Well, I'm on T-Mobile also and have had no issues, thats strange. Did you flash the recommended radio also? Maybe you need to try a different one if so.
I really like the Bricked kernel, it runs faster/smoother and the battery life is better than the Faux kernels I used - at least what I've seen so far. I run Sense 3.0 so Im limited to Bricked 0.91, but its still plenty good from what I've seen. He is developing more for Sense 3.5 kernels at this point I think.
Anyway, if it was me, I would try one of the ARHD ROMs with a bricked kernel (the kernel can also affect your reception I believe). If you still have issues, try clocking it back to 1.2 Ghz. I too ran IC for a little while, but finally just settled back to ARHD for a few reasons.
~T.J.
02CWRX said:
Well, I'm on T-Mobile also and have had no issues, thats strange. Did you flash the recommended radio also? Maybe you need to try a different one if so.
I really like the Bricked kernel, it runs faster/smoother and the battery life is better than the Faux kernels I used - at least what I've seen so far. I run Sense 3.0 so Im limited to Bricked 0.91, but its still plenty good from what I've seen. He is developing more for Sense 3.5 kernels at this point I think.
Anyway, if it was me, I would try one of the ARHD ROMs with a bricked kernel (the kernel can also affect your reception I believe). If you still have issues, try clocking it back to 1.2 Ghz. I too ran IC for a little while, but finally just settled back to ARHD for a few reasons.
~T.J.
Click to expand...
Click to collapse
What arhd version you using and kerne so maybe I can try and use itl? I believe mike suggested to.flash it with the radio 10.58 which I did and it made my signal stable but few fcs and blackscreen so I reverted back to stock.
Sent from my HTC Sensation 4G using xda premium
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
02CWRX said:
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I'll give 3.6.2 a try and the kernel you said and hope it works good now. Thanks. Let me know if the 3.6.4 works flawless. Thanks
Sent from my HTC Sensation 4G using xda premium
02CWRX said:
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
Any chance you could share the link for the bricked kernel 0.91 that u used. Thanks.
Sent from my HTC Sensation 4G using xda premium
jhobert said:
Any chance you could share the link for the bricked kernel 0.91 that u used. Thanks.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
malybru said:
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
Click to expand...
Click to collapse
Thanks so much, you've been so helpful with me and I do appreciate it.
Sent from my HTC Sensation 4G using xda premium
malybru said:
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
Click to expand...
Click to collapse
Hi I tried 3.6.2 with the bricked kernel that you said and also used the recommended radio 10.58 but I'm still having signal issues, signal still unstable constantly the bars goes up and down. Any idea how to fix the issue. Yha.ka again
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
Hi I tried 3.6.2 with the bricked kernel that you said and also used the recommended radio 10.58 but I'm still having signal issues, signal still unstable constantly the bars goes up and down. Any idea how to fix the issue. Yha.ka again
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
You really are having no luck...
Can I ask:
What was your signal like when you first got your phone out-of-the-box?
malybru said:
Hi,
You really are having no luck...
Can I ask:
What was your signal like when you first got your phone out-of-the-box?
Click to expand...
Click to collapse
I'm always either 3 to full bars, I barely get 2. Even when I restore my phone to stock using the stock RUU signal is good. I'm on tmobile us carrier I don't know I'd that matters on my case
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
I'm always either 3 to full bars, I barely get 2. Even when I restore my phone to stock using the stock RUU signal is good. I'm on tmobile us carrier I don't know I'd that matters on my case
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
Have you tried a custom ROM with the original radio?
I know it won't be matched,but sometimes it's a needs must situation.
Use the radio that will give you the BEST signal.
It might just be that it's the only one that will work properly in YOUR area.
malybru said:
Hi,
Have you tried a custom ROM with the original radio?
I know it won't be matched,but sometimes it's a needs must situation.
Use the radio that will give you the BEST signal.
It might just be that it's the only one that will work properly in YOUR area.
Click to expand...
Click to collapse
I did tried the stock radio at first but signal goes from 2 bars to no signal so I decided to use the radio that's been suggested by mike for his Rom.
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
I did tried the stock radio at first but signal goes from 2 bars to no signal so I decided to use the radio that's been suggested by mike for his Rom.
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
So,what combination of ROM and radio was the best for signal?
And with your current set-up,do you ALWAYS have bad signals?
Or does it vary from area to area?
Hey whats up everyone? I know there are threads about this but i feel mine is specific.
So i have my sensation and tonight im gonna prepair to install ICS. Few quick questions.
1. I havnt supercid yet which isnt a problem but from my understanding if i upgrade to the 3.24 then there is no need to supercid?
2. Which ics roms have u tried that run fast/stable/ with working camera/video camera.
3. Would like an ics rom thats either stripped of sense or an AOSP build
Thanks for reading.
sent from my Sensation
vabeachfc3s said:
Hey whats up everyone? I know there are threads about this but i feel mine is specific.
So i have my sensation and tonight im gonna prepair to install ICS. Few quick questions.
1. I havnt supercid yet which isnt a problem but from my understanding if i upgrade to the 3.24 then there is no need to supercid?
2. Which ics roms have u tried that run fast/stable/ with working camera/video camera.
Thanks for reading.
sent from my Sensation
Click to expand...
Click to collapse
1. You dont have to but you may have to edit the Firmware package to add your CID....all details instructions here:
http://forum.xda-developers.com/showthread.php?t=1412618
2. I am on ARHD 6.1.1 - its amazingly stable and battery is brill. Only bug effecting me is for now you cannot have apps on SD card as it cause Sense to crash. I moved mine all back to phone and have no issues. No issues at all with camera - effects also works and did not on earlier versions - but I am not a major camera user.
---------- Post added at 03:32 PM ---------- Previous post was at 03:29 PM ----------
boakesm said:
1. You dont have to but you may have to edit the Firmware package to add your CID....all details instructions here:
http://forum.xda-developers.com/showthread.php?t=1412618
2. I am on ARHD 6.1.1 - its amazingly stable and battery is brill. Only bug effecting me is for now you cannot have apps on SD card as it cause Sense to crash. I moved mine all back to phone and have no issues. No issues at all with camera - effects also works and did not on earlier versions - but I am not a major camera user.
Click to expand...
Click to collapse
...
Just remembered this thread for Firmware - think its more fool proof
http://forum.xda-developers.com/showthread.php?t=1459767
Nods to Above
Hi
Gotta say I agree with everything posted in#2 - I have moved to ARHD 6.1.1 and it is smooth as butter
Everything works and it looks amazing - I had thought that Sense 3.5 was good but this latest ICS is much better.
No FC's (other than when I had apps on my SD card)
If this is what the dev's can give us with a 'test' release then the official release (once dev-d) is gonna rock!!
vabeachfc3s said:
Hey whats up everyone? I know there are threads about this but i feel mine is specific.
So i have my sensation and tonight im gonna prepair to install ICS. Few quick questions.
1. I havnt supercid yet which isnt a problem but from my understanding if i upgrade to the 3.24 then there is no need to supercid?
2. Which ics roms have u tried that run fast/stable/ with working camera/video camera.
Thanks for reading.
sent from my Sensation
Click to expand...
Click to collapse
I think confused i am right in saying this. Without super CID you will be fine with custom roms however, if you install an un-lockable bootloader you will not, at this time, be able to downgrade again afterwards. Perhaps somebody with more knowledge would be able to clarify this.
Super CID is very simple to perform if you follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1192300 and is easily reversable if you make a note of your original CID if you are worried about your warranty.
Do u guys suggest to just go to 3.12 or 3.24? With 3.12 u need to supercid correct?
sent from my Sensation
Well doing the cid right now
sent from my Sensation
vabeachfc3s said:
Do u guys suggest to just go to 3.12 or 3.24? With 3.12 u need to supercid correct?
sent from my Sensation
Click to expand...
Click to collapse
See instructions above you dont needs supercid...but no harm by doing - supercid expands your options on ROMs, etc. Basically anything will work.
If you want lastest ICS release with Sense 3.6 you must have 3.24 - else wont work. Also 3.24 not backward compatable to GB or older ICS roms so if you want to go back to earlier Android version you will need to downgrade back to 3.12 or earlier. Not hard just the same as upgradingbut with correct firmware file.
Thanks
Sent from my MIUI.us Sensation 4G using XDA App
Suggestions on which rom i should go with?
Sent from my MIUI.us Sensation 4G using XDA App
So if I upgraded to 3.12 can I later go back to 1.17 or 1.18 if I want to flash a gingerbread rom. Or can I keep 3.12 and still be able to go back to gingerbread rom if I want?
Sent from my SGH-T989 using xda premium
I believe so
Sent from my MIUI.us Sensation 4G using XDA App
Ok so im supercid. Have the 3.24 on root of sd card. Have super wipe script on root of sd card. Have virtuous rom on root of sd card.
Now when i go to run the super wipe it says. Install aborted. System already mounted.
My steps so far....
All files on root of sd
Take sd card out boot into bootloader. Highlight recovery. Insert sd card. Get into clockworkmod 5.0.2.0 go to flash super wipe and install aborted. Wtf?
Sent from my MIUI.us Sensation 4G using XDA App
Hi.. Just flashed my first ROM yesterday a complete NOOB but all went well, due to the good advice given in the various thread on this forum...
I'm rooted & supercid.
I also initially had problems with super wipe which i think turned out to be a non sensation version.
Not sure if its possible to tell but search the forum for a known sensation version.
Yea thanks man. Doing that now
Sent from my MIUI.us Sensation 4G using XDA App
Virtuous quattro is very nice. Glad i updated to ics.
Sent from my Virtuous Quattro A3 ICS HTC Sensation
Try out Virtuous Inquisition or Virtuous Quattro if you want Senseless ROMS. They are lso for the most part AOSP. I run them both and they are really fast. I also like the 1.5 GHz kernel. Really comes down to personal preference. People really like InsertCoin and ARHD, but they are not as fast as VIQ or VI, in my experience with them. I would also highly recommend CID, why not it is easy and everything will work.
Done all the above. Check sig
Sent from my Virtuous Quattro A3 ICS HTC Sensation
Dolphin browser crashes like no one business. No 4g as of yet
Sent from my Virtuous Quattro A3 ICS HTC Sensation
I highly reccommend ARHD 6.2.1/XE. I'm running the XE version myself. Has been great.
Found it. Will try later tonightQUOTE=chrischoi;21889751]I highly reccommend ARHD 6.2.1/XE. I'm running the XE version myself. Has been great.[/QUOTE]
Sent from my Virtuous Quattro A3 ICS HTC Sensation
I'm using bricked kernel 3.0 v1.31.on the settings do I want sweep2wake? Do I want zram?on the 3D Gpu I picked 266 o.c. disabled.and for default governor I picked on-demand.and deadline default I chooses cfq.and shall I boot after install yes or no.I'm setting this kernel up for the best battery saving life.could someone help me out on what I want to choose on the different listed settings.I would really appreciate it.this is my first tie running a bricked kernel.I just trying to see if I can get better batt life with a bricked then a faux kernel. Thanks!!!
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Mesaman2012 said:
I'm using bricked kernel 3.0 v1.31.on the settings do I want sweep2wake? Do I want zram?on the 3D Gpu I picked 266 o.c. disabled.and for default governor I picked on-demand.and deadline default I chooses cfq.and shall I boot after install yes or no.I'm setting this kernel up for the best battery saving life.could someone help me out on what I want to choose on the different listed settings.I would really appreciate it.this is my first tie running a bricked kernel.I just trying to see if I can get better batt life with a bricked then a faux kernel. Thanks!!!
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Click to expand...
Click to collapse
"sweeptoweake" simply does not decrease or increase the battery life, but is quite comfortable to wake up the screen. Of course you'll want ZRAM, this is just to prevent the SENSE restarts. In my case I use the 3D and 2D options to best. And all that is left by default. But the battery life will depend much of the ROM you use and what type of user you are ... good luck!
Well the kernel I have listed is that a good one for batt life.
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Mesaman2012 said:
I'm using bricked kernel 3.0 v1.31.on the settings do I want sweep2wake? Do I want zram?on the 3D Gpu I picked 266 o.c. disabled.and for default governor I picked on-demand.and deadline default I chooses cfq.and shall I boot after install yes or no.I'm setting this kernel up for the best battery saving life.could someone help me out on what I want to choose on the different listed settings.I would really appreciate it.this is my first tie running a bricked kernel.I just trying to see if I can get better batt life with a bricked then a faux kernel. Thanks!!!
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Click to expand...
Click to collapse
i disabled the zRam option, dunno why, using zram slightly drains my battery more. the rest is just fine with your setting
I seem to get better battery life on bricked rather than faux. Give both a try and see what you think.. which Rom are you running? Viper has given me excellent battery life with bricked. Hope this helps.
Sent from my HTC Sensation 4G using xda premium
@realsis- crap, didnt mean to but enjoy the free thanks!
Ive found that Bricked kernel is better for battery life and everyday use, while Faux kernel is great for gaming
I'm running 6.6.7 x.e. 4G with beats audio.the bricked kernel that I have listed above a good one for my Rom?
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Mesaman2012 said:
I'm running 6.6.7 x.e. 4G with beats audio.the bricked kernel that I have listed above a good one for my Rom?
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Click to expand...
Click to collapse
Yes its a good one.
Please note.that 1.36beta is out as well with some wifi fixes and other nice changes in frequency/2nd cpu management.
Might be worth a shot as well.
Sent from my HTC Sensation using xda premium
I'm have been running bricked kernel 3.0 v1.36 and I have all the setting set the lowest for batt life.Is that what I want to do?How do I exactly want to set the scheduler,governor and everything else for maximum batt life.
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Mesaman2012 said:
I'm have been running bricked kernel 3.0 v1.36 and I have all the setting set the lowest for batt life.Is that what I want to do?How do I exactly want to set the scheduler,governor and everything else for maximum batt life.
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Click to expand...
Click to collapse
That is completely different from one user to another. It really depends on what appa you use, how often, how much wifi/3g/4g you use and their signal strength etc etc...
Usually badass works great, and it is more juice friendly than ondemand.
OC the gpu is usually draining some.
But again, it's very peraonal.
Please keep in mind to run a few cycles on whatever configuration you try. A day is usually not enough and no two days are the same
Sent from my HTC Sensation using xda premium
I want to thank all of you I'm just going to mess with settings and runs a few and see what I come up with. Takecare!!!
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
I never see a difference on any kernel ? How you guys can notice better battery?
Sent From My Sexy Sensation Running Aokp.
i am using the stock rom ics 4.0.3 with firmware 3.33.401.6
rooted device,S-ON with hboot 1.27
bootloader unlocked
it that kernel compatible with my device or not?
i just want to be sure.thx
Just make sure you have the sense version of the bricked kernel then flash it on a them reboot. Have fun buddy!!!
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Mesaman2012 said:
Just make sure you have the sense version of the bricked kernel then flash it on a them reboot. Have fun buddy!!!
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
Click to expand...
Click to collapse
how can i know that?
is that the sense version of the bricked or not?
http://forum.xda-developers.com/showthread.php?t=1256668
in features it says is tested on sense 3.6(i have the same) and it is based on HTCs-3.0.16-Sources(which i have the same kernel)
i just wanna be sure.
if someone can confirm
thx again
Yes as long as it says Ics that's sense.
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app
i have flashed bricked kernel but in the end said assert failed: bla bla bla something about boot.i don't remember
also i pressed finish
when i rebooted my device the wifi shows error
i tried to flash boot.img from the firmware zip with adb but it didn't work
does anyone knows any solution otherwise pls give me the link for the stock ics kernel
i don't even know if bricked kernel is installed
my stock kernel is 3.0.16-g31a4fc7
also if i flash the stock rom again will solve the problem?
Hi make sure the bricked kernel you downloaded SAYS its for ICS ok then you should not have any problems. Hope this helps you. I'm running bricked and have zero problems with WiFi working. Don't give up just find the correct ICS bricked kernel. It will say in the description of the kernel ok. Best wishes
Sent from my HTC Sensation 4G using xda premium
i have tried many versions of bricked kernel and all of them says the same thing in the end
assert failed:write_raw_image''(''/tmp/new.boot.img'',''boot'')
the strange is that after it says crongatulation bricked has been installed
i press finish ,i reboot my phone and i have the same wifi issue
any other suggestion otherwise i'll flash the rom again
thx for your help and time
rzr86 said:
i have tried many versions of bricked kernel and all of them says the same thing in the end
assert failed:write_raw_image''(''/tmp/new.boot.img'',''boot'')
the strange is that after it says crongatulation bricked has been installed
i press finish ,i reboot my phone and i have the same wifi issue
any other suggestion otherwise i'll flash the rom again
thx for your help and time
Click to expand...
Click to collapse
The problem is you are S-ON, so kernels wont flash properly.
Either you need to S-OFF or you need to repacked the zImage file into an existing boot.img file (dsixda kitchen and cygwin needed) then use the command "fastboot flash boot boot.img"
Personally I would go with S-OFF, its so much easier and less faffing about than the other way
Please answer!
I made a mistake.
Please add Bricked /Trinity/RCMixSensationICS/PYD-X/
Hi I'm using pydx2.5 It's a great new kernel use with mod. The mod is from pachaxxx tuner pack. It's really fast yet you will get a super battery life. You have the ability to change the settings in Aroma for CPU etc. I've been using it for about a week and I love it! Just upgraded from stable 2 to 2.5 today. You use terminal emulator to flush system when/if your system seems laggy. It works wonderfully and I'm very happy with it. I've had no problems whatsoever with it. You definitely need to give it a try and see what you think! Best wishes
sent from HTC sensation, soff, 3.33 firmware, viper Rom, sense 4.1, mugen battery. please press thanks if I helped in anyway.
i'm recently using sebastianFM kernel and i am happy so far
realsis said:
Hi I'm using pydx2.5 It's a great new kernel use with mod. The mod is from pachaxxx tuner pack. It's really fast yet you will get a super battery life. You have the ability to change the settings in Aroma for CPU etc. I've been using it for about a week and I love it! Just upgraded from stable 2 to 2.5 today. You use terminal emulator to flush system when/if your system seems laggy. It works wonderfully and I'm very happy with it. I've had no problems whatsoever with it. You definitely need to give it a try and see what you think! Best wishes
sent from HTC sensation, soff, 3.33 firmware, viper Rom, sense 4.1, mugen battery. please press thanks if I helped in anyway.
Click to expand...
Click to collapse
Same here, no problems with that. I had Bricked kernel before, it was good too, but pydx2.5 gives me more poinst in antutu plus very nice battery life.
Sent from my Sensation Elegancia 3.1 with Sense 4.1 using xda app-developers app
OpenSensation + Tamcore Kernel
I plan on testing out Viper's ROM on my Sensation tomorrow & I wanted to see how you guys like it & what kernel you used with it.
Hi there. I use pyd-x stable 3 kernel on my viper Rom . I really love it. The Rom has tons of customization and that particular kernel has a system tuner type of mod that goes with it and you can flush your system on terminal emulator if it's getting lag. This kernel is very fast and I've got great battery life .
I'm very happy with my set up. Play around with different kernels and see what suits you best. Best wishes !
sent from HTC sensation, soff, 3.33 firmware, viper Rom, sense 4.1, mugen battery. please press thanks if I helped in anyway.
One of the better roms I've used, preferred at the moment
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Been on Viper for about 2-3 weeks now...Customization is awesome. The team is very helpful as well as non team members. I was running Coredroid for a long time and decided to try this for a while and I give Kudos to both roms and member..im sure you wont be disappointed.
Viper
Skip-Breezy said:
I plan on testing out Viper's ROM on my Sensation tomorrow & I wanted to see how you guys like it & what kernel you used with it.
Click to expand...
Click to collapse
The ROM is wonderful except, if you set something in the settings wrong it goes into a reset loop. I have no idea which setting it is as you have to reinstall the ROM including a full wipe to make the restart loop go away. I have now given up on the ROM until someone can tell me it stops restarting
I'm currently on Elegencia's ROM but I've heard nothing but good comments about Viper's ROM so I'm use it for a while
Been using this ROM for about a month now with latest Faux kernel. Battery life awesome, love all the tweaks, running smooth as a babies butt!
Had no reboots, very stable. Only minor gripe is that recently don't always get message notifications for Handscent. Probly something on phone not the ROM though.
Defo recommend!
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
I used to use it but would get a gradual lag over time so I went to CM10 went back now am back on CM10. CM10 by Bruce is amazing, jelly bean rocks.
Sent from my HTC Sensation using xda app-developers app
I'd try it been on it awhile now..latest version is simply amazing
Sent from my HTC Sensation 4G using xda app-developers app
yeah...CM 10 rocks any day. Bruce is awesome
Chance
Any chance that you can post the link to the CM10 rom?
Joshua3109 said:
I used to use it but would get a gradual lag over time so I went to CM10 went back now am back on CM10. CM10 by Bruce is amazing, jelly bean rocks.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
corbin1747 said:
Any chance that you can post the link to the CM10 rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1782009