Database Info

[HOW-TO]Prepare your phone to send into Samsung/AT&T

This Guide is for any user that has a Rom installed. This will back-up almost everything the user has put on the phone.
So, here are some things you need.
Heimdall One Click KB2 - http://forum.xda-developers.com/showthread.php?t=1266172 (thanks to AdamOutler)
1) First, make a nandroid backup.
2) Make an /efs backup (adb pull /efs) (also can use an app called nitrality available in market)
3) Now, you will need to Plug in your phone to the computer. Take ALL the folders on your SD card and copy them to your laptop. (Mine was user/android/sdcardbackup)
4) Remove Micro-sd card, and SIM card
5) Open up your dialer and dial this code *2767*3855# THIS WILL WIPE YOUR SD CARD and /DATA
6) Reboot the Phone
7) put your Phone in download mode, open heimdall One Click and insert the phone and make sure that heimdall recognizes it
8) Flash the new firmware Bootloaders not required
9) Have the Phone Boot up Completely (takes a long time)
10) Check to see if your /efs has been edited. Use this thread http://forum.xda-developers.com/showthread.php?t=881162 (and your efs backup) to get it back.
11) You might want to dial *2767*3855# Just in case if there is anything left.
12) You should be running KB2, have your SD cleared, and ready to be turned into samsung.
Post Questions and comments below!

i decided to save this one, no clue why, just wanted to feel important...

Better include this or your phone might come back with a voided warranty.
http://forum.xda-developers.com/showthread.php?t=881162

bigbooty said:
Better include this or your phone might come back with a voided warranty.
http://forum.xda-developers.com/showthread.php?t=881162
Click to expand...
Click to collapse
It isnt supposed to erase the /efs but ill include it, thanks!

sepherian said:
It isnt supposed to erase the /efs but ill include it, thanks!
Click to expand...
Click to collapse
No. Flashing different roms jacks with your efs. A while back I decided to clean up my phone. Internal storage was a cluster. Just for the hell of it I decided to odin back to stock and master clear, then try the 2.2 kies update. Never had tried it. Well got the unregistered device thing and kies wouldn't update it. Found the thread above and downloaded hex editor and followed the instructions, edited my NV_DATA.BIN and reloaded stock jf6 and this time kies upgraded with no problems.
Flashing many different roms changes your product code even though SG tools said I had a sgh-I897, NV_DATA.BIN said I had something else.

When my cappy messed up, my imei got corrupted. Luckily I messed with around with sgs unlock a few months before and still had my back up and was able to restore it before turning it in. first thing I did with new cappy was back up efs. Product code was different also. Flash enough roms and it can mess up something as someone might be a novice coder and mess your device up.
Sent from my SAMSUNG-SGH-I897 using XDA App
Edit: fixed Imei

Nucleartx said:
When my cappy messed up, my meid got corrupted. Luckily I messed with around with sgs unlock a few months before and still had my back up and was able to restore it before turning it in. first thing I did with new cappy was back up efs.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
meid? i think you mean imei?

bigbooty said:
No. Flashing different roms jacks with your efs. A while back I decided to clean up my phone. Internal storage was a cluster. Just for the hell of it I decided to odin back to stock and master clear, then try the 2.2 kies update. Never had tried it. Well got the unregistered device thing and kies wouldn't update it. Found the thread above and downloaded hex editor and followed the instructions, edited my NV_DATA.BIN and reloaded stock jf6 and this time kies upgraded with no problems.
Flashing many different roms changes your product code even though SG tools said I had a sgh-I897, NV_DATA.BIN said I had something else.
Click to expand...
Click to collapse
Yes, I know. This Flash is not intended to mess with the /efs AT ALL, i have checked the package and it has no reference to /efs in the scripting. The post including the package also says this:
This package does not wipe:
EFS(Where your serial number and carrier information is stored)
Data(where your market apps are stored)
SDCard (where your pictures are stored)
Click to expand...
Click to collapse
So as you can see the number i have them call wipes the data and SD but they have their nandroid and SD backups. The number i have them call also doesnt touch the /efs. Trust me, I tested this method before i posted it and i didnt make an efs backup and my IMEI was perfectly fine afterward. I assume that nothing here messed with my /efs at all.
The only thing that would change the NVdata.bin would be an unlock tool. And i doubt that it even changes it.

OP was updated with more accurate steps.

[TUT] Install Root, CWM, and the FC17 Update on Samsung Conquer 4G

Here are the files and instructions to get root and CWM on a Samsung Conquer 4G with the FC17 update. To enter Download Mode on the phone, make sure the phone is turned off and plugged into the wall charging. You should also make sure the phone has a good charge on it. Then turn the phone on by pressing the volume down and camera button and holding them while pressing the power button for a few seconds.
Here are the files you will need -
CONQUER-ROOT.zip
Unzip all the files on your computer and follow these steps.
1) Enter download mode on the phone and plug it into your computer. Open up the Odin program. Then press the OPS button and select the SPH-D600_FC17_CWM.ops file. Then press the PDA button and select the SPH-D600_FC17_CWM.tar.md5 file. The press the Start button, the images should install and the phone reboot. Congrats, your phone now has a stock FC17 image with a CWM Recovery.
2) Next, copy the Superuser-3.0.7-efghi-signed.zip and su-bin-3.0.3.2-efghi-signed.zip files to the root of your SD Card after booting up.
3) Once the phone boots up, go into settings, select Applications, then Development, then turn on USB debugging. Now you can restart the phone into recovery mode with adb. If you don't want to use adb, you can plug the phone into the wall and turn it on while holding the volume down and power button. Either way is fine, as long as you now get the phone into recovery mode.
4) The phone should now go into CWM recovery. Go to install zip from sdcard and select the Superuser-3.0.7-efghi-signed.zip file you put on the sdcard and install that. Next select the su-bin-3.0.3.2-efghi-signed.zip file from your sdcard and install that.
5) Congratulations, you now have a rooted phone with the FC17 update. If you had CWM installed before, you can now do an advanced back-up, and just restore the data from your most recent backup and get all your data back.
I've created a new custom ROM here - http://forum.xda-developers.com/showthread.php?p=29369141
You can just download the new files and follow those instructions if you haven't installed this yet.

it work like charm thank you very much sir very good job done..........
---------- Post added at 04:47 AM ---------- Previous post was at 04:38 AM ----------
there is any custom rom kool one ...

I know on the E4GT, sfhub is able to make tar's that do not wipe user data. The file difference between the 2 images are
removed: boot.bin, sbl.bin, param.lfs, cache.img, data.img
intact: recovery.bin, hidden.img, factoryfs.img(largest file) modem.bin and zImage(contains the kernel)
The Question I'm posing to you is which of the files in the conquer tar.md5 might be the counterparts to the above files, making them the ones to strip out in order to make it not wipe data?
My wife never wanted me to root her phone until recently, so no cwm backup that's pre-OTA, and there are some apps that don't work when re-installed (a security key-gen app)
Any help would be much appreciated.

AestenD said:
I know on the E4GT, sfhub is able to make tar's that do not wipe user data. The file difference between the 2 images are
removed: boot.bin, sbl.bin, param.lfs, cache.img, data.img
intact: recovery.bin, hidden.img, factoryfs.img(largest file) modem.bin and zImage(contains the kernel)
The Question I'm posing to you is which of the files in the conquer tar.md5 might be the counterparts to the above files, making them the ones to strip out in order to make it not wipe data?
My wife never wanted me to root her phone until recently, so no cwm backup that's pre-OTA, and there are some apps that don't work when re-installed (a security key-gen app)
Any help would be much appreciated.
Click to expand...
Click to collapse
Take out userdata.yaffs to retain your data, BUT you will have to rebuild the tar file and remake the OPS file by removing the line that reads -
Code:
9,userdata
If you need the Linux commands to rebuild the image, let me know.

brienj said:
Take out userdata.yaffs to retain your data, BUT you will have to rebuild the tar file and remake the OPS file by removing the line that reads -
Code:
9,userdata
If you need the Linux commands to rebuild the image, let me know.
Click to expand...
Click to collapse
Crap, and me with no Linux box lol
I'll figure something out, I have a live CD around here somewhere.

AestenD said:
Crap, and me with no Linux box lol
I'll figure something out, I have a live CD around here somewhere.
Click to expand...
Click to collapse
Just install Cygwin and use that and then extract all the files out of the .md5 file, it's just a regular tar file with md5 sums in it. WinZip, WinRAR, etc. will easily extract the files from it. Then use these commands to rebuild the image without the userdata.yaffs file.
tar -H ustar -c adsp.mbn amss.mbn appsboot.mbn boot.img cache.yaffs mibib osbl recovery.img system.yaffs > package_name.tar
md5sum -t package_name.tar >> package_name.tar
mv package_name.tar package_name.tar.md5
Click to expand...
Click to collapse
You can replace each package_name with whatever you want it called.

brienj said:
Just install Cygwin and use that and then extract all the files out of the .md5 file, it's just a regular tar file with md5 sums in it. WinZip, WinRAR, etc. will easily extract the files from it. Then use these commands to rebuild the image without the userdata.yaffs file.
You can replace each package_name with whatever you want it called.
Click to expand...
Click to collapse
Thanks for your help, took me a bit, because I mistakenly flashed the non-CWM image first, and the bootloader version just wasn't letting me in. Luckily I have a jig for my SGS2, and I'm up and running now. Hopefully just the fact that it's the full image, rather than OTA upgraded will fix some of the issues she's been having. If not, then having root gives me so many more troubleshooting options.

give me an error says the SPH-D600_FC17_CWM.tar.md5 is invalid image type please help

sromero619 said:
give me an error says the SPH-D600_FC17_CWM.tar.md5 is invalid image type please help
Click to expand...
Click to collapse
"known issue" just keep going, it'll work just fine.
Sent from my SPH-D710 using Tapatalk

sromero619 said:
give me an error says the SPH-D600_FC17_CWM.tar.md5 is invalid image type please help
Click to expand...
Click to collapse
It says this, even with an official Sprint Odin image. It will still work, like AestenD mentioned.

i did all the step but when i hit start on the odin it says please connect phones what can else can i do. loaded the drive from super one click because my laptop running windows seven wasn't reading my phone. Its reading my phone I downloaded the usb driver from this link http://r2doesinc.bitsurge.net/leaked/
now when i run odin now it say """an unnamed file was not found""" whats to do please help

brienj said:
It says this, even with an official Sprint Odin image. It will still work, like AestenD mentioned.
Click to expand...
Click to collapse
i got the phone to be read but now when i hit the start button a window pops out says "unnamed file is not found"

It worked for me.

Question
I have been reading up on this phone since I ordered it from my new provider. I should get the phone sometime later today and wanted to get everything ready to root it as soon as I get it. I've read JWhip804's tutorial on how to root the Conquer. I've also been keeping up with chrystal0925's efforts at making a working themed ROM.
My question is, if I want to have a recovery of my stock phone just in case I have to send it back to my carrier, should I use the method described in this thread or use JWhip804's thread?
I have a brand new Samsung Conquer SPHD600BKS on the Sprint network using a new provider to my area called Ting.
Android Version: 2.3.4
Baseband Version: S: D600.12 x.EG15
Kernel Version: 2.6.35.7-perf
Build Number: GINGERBREAD.EG15
Hardware Version: D600.12
Thanks.

roofus1812 said:
I have been reading up on this phone since I ordered it from my new provider. I should get the phone sometime later today and wanted to get everything ready to root it as soon as I get it. I've read JWhip804's tutorial on how to root the Conquer. I've also been keeping up with chrystal0925's efforts at making a working themed ROM.
My question is, if I want to have a recovery of my stock phone just in case I have to send it back to my carrier, should I use the method described in this thread or use JWhip804's thread?
I have a brand new Samsung Conquer SPHD600BKS on the Sprint network using a new provider to my area called Ting.
Android Version: 2.3.4
Baseband Version: S: D600.12 x.EG15
Kernel Version: 2.6.35.7-perf
Build Number: GINGERBREAD.EG15
Hardware Version: D600.12
Thanks.
Click to expand...
Click to collapse
Super-One-Click only works on EC15, and you can not do an OTA update to FC17 with root, and once you do update to FC17, Super-One-Click will no longer work to root your phone, so you must use the method I have made in this thread, or a similar one to it. You MUST get a stock FC17 image with the CWM recovery to push root onto your phone, as the OTA update has recovery updating scripts, etc. in it, and it's just easier to use the FC17 image and not bother with making the OTA able to be rooted. In order to get the phone back to a stock image, you can easily find the stock Odin image that is floating around, or change the recovery image in the Odin file I have in this thread, with a stock recovery image.

Finished
brienj said:
Super-One-Click only works on EC15, and you can not do an OTA update to FC17 with root, and once you do update to FC17, Super-One-Click will no longer work to root your phone, so you must use the method I have made in this thread, or a similar one to it. You MUST get a stock FC17 image with the CWM recovery to push root onto your phone, as the OTA update has recovery updating scripts, etc. in it, and it's just easier to use the FC17 image and not bother with making the OTA able to be rooted. In order to get the phone back to a stock image, you can easily find the stock Odin image that is floating around, or change the recovery image in the Odin file I have in this thread, with a stock recovery image.
Click to expand...
Click to collapse
I just finished backing up my Conquer using this guide. It was really easy. Thanks.

Hi guys. Anyone use tethering with this? I had tethering working on the old rom fine and another unrooted phone with the ota update. I got a replacement phone and tethering does not work. It only works for google sites - with any tethering app i tried. Is it the hardware or maybe its the stock fc17? I tried reflashing and clearing everything and the problem persists.

I tried using Odin today to root my Samsung Conquer and had a bit of trouble. When I attached the .tar file it gave me an error but as I read this thread I just kept going as if there was no issue. About half way through the Odin installation my phone just rebooted, I tried again and it rebooted it the same spot. I tried putting my phone back into download mode and continue the process, which it did, and I got a "Pass" message at the end. But I don't have CWM and I'm almost positive its still not rooted. Any suggestions?

Any chance of an update with the new OTA included?
Sent from my SPH-D710 using xda premium

There is a new ota fe17. Does anyone know if it will break root? Will it install?
Sent from my SPH-D600 using XDA

[IMPORTANT][GUIDE] What to do after you have bought your Galaxy S3 4G GT-I9305?

Ok these steps are very important but before anything I also have to thank Lyriquidperfection & Ausdim for setting up their important parts of the instructions inside the links below:
So before you flash anything, or start playing with your gem, follow these important steps below to get all the important parts backed up and safe, so that you will not have to return your device back to samsung broken. Believe me I have seen it happen PLENTY of times in this forum, so read carefully
Make sure you have a Good USB cable and a stable PC and that don't get any power outages or surges, you dont want to be half way through something and you loose power or get a bad connection.
1st: Install Samsung Kies on your PC this will then Install the Samsung USB drivers you will need to connect your device to your PC OR you can get the samsung drivers on there own from the Link in 2nd step, but I recommend you install kies as it may be useful to you in the future.
2nd: Now as your IMEI number is like the heart of your device lets back it up right now: Follow only part of these steps in this link, you will finish the rest of the backups at the end when your rooted. I have copied and bolded the parts you will need to do right now, once finished this section of the backup you should be left with a *.qcn file which is roughly around 250kb of size.
http://forum.xda-developers.com/showpost.php?p=33048706&postcount=1
*Setting up QPST with your PC:*
*Backing Up IMEI / NV Data:*
*Restore USB Settings after Backup / Restore:*
Now keep that page open because you will return here in step 6 once you are rooted to complete the backup process.
3rd: Now Install Odin V3.04 - You can get the link for odin in the 4th step link, So you may aswell just continue on to 4th step as the instructions inside that link advice you to install Odin aswell.
4th: Now you must Root your device and install CWM recovery , Follow these steps carefully > http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1
5th: Once you have root I recommend you instantly make a full backup of your device also known as a Nandroid backup. You must go into recovery mode to do this with the CWM recovery you have just installed in 4th step above. (In recovery mode just click backup/restore and then choose backup, after its done your backup will be placed on your ext sd card , if you dont have ext sd card then choose backup onto internal sd card.)
6th Now lets finish the backup process since we are now rooted, I am going to say this again, this is VERY important incase something goes wrong and you loose your Imei and Data, you need to back it all up. By doing this it will save you returning your device back to samsung like many have done previously because they have not done this, Remember where you left off in 2nd step above? Well now you can go back and complete the partition backup of the efs folders. You should be left with 4 backup files for this final section of the backup process >>> http://forum.xda-developers.com/showpost.php?p=33048706&postcount=1
--------====FINISHED====--------
Congratulations you now have your Imei/Nv data backed up , You are rooted and Nandroided. Now you can play around but off-course DO NOT be reckless make sure you know what you are playing with
Peace
PS: Only trust what you see in this I9305 XDA forum, as i have been following the device from day one and I can only recommend the information you see here.

can't find step 4..

Sorry I just fixed all the links

stuck on whether to install the I9305_CWM_Recovery.tar.md5 software and what I risk
EDIT: thread Readers please note. I was a NOOB and I initially and accidentally credited "Lyriquidperfection" (who has also been very considerate in assisting) for the thread when "btemtd" was the original thread creator. "btemtd", I have edited to show appropriate. I am sorry please forgive my oversight.
**
Dear "btemtd"
*Note the following pre-install procedures and verifications confirmed:
1) My phone is NOT bricked and is running stock OEM i9305 installed software with details for the device posted at the end of this reply.
2) prior to doing ANYTHING I verified I can Dial *#7284# on phone and can see the 'Qualcomm USB Settings' button
3) KIES drivers installed and i9305 to PC works in KIES application and drag and drop modes
4) I have downloaded the Param_Bin_I9305.tar.md5 file in case I need it.
5) I have downloaded the I9305_CWM_Recovery.tar.md5 file for use when I install the CWM.
6) I have downloaded the CWM-SuperSU-v0.96 application but have not yet installed it and have not yet learned about how to operate it (I will study and follow your instructions prior to doing so)
7) I have read this entire thread and all replies.
8) I have also read the entire thread and all replies to: [WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305
9) I don’t care about losing any of the media or pictures or applications (whatsapp) installed on my phone as these can all be reinstalled later on.
I have successfully executed the following so far:
1) I installed QPST v2.7.378 program on my PC and backed up a .qcn file. I then restored the .qcn file back to the i9305 and it accepted the restoration without problem. I can see my IMEI number by dialing Dial *#06#
2) I DID NOT back up any of these files below because I was NOT rooted and I DO NOT have a terminal emulator application (I can learn the emulator application if it is necessary and if someone can provide a link to where to get it). IF it is required for me to back up these files PRIOR to proceeding using ODIN please direct me to do so. I would prefer to not have to learn the emulator program unless it is required.
m9kefs1 - Located at: '/dev/block/mmcblk0p4'
m9kefs2 - Located at: '/dev/block/mmcblk0p5'
m9kefs3 - Located at: '/dev/block/mmcblk0p6'
3) I installed ODIN version Odin3 v3.04 (but I still have no clue how to operate this software)
*
This is where I stopped. Why? Well, after reading the instructions "btemtd"provided in thread I became concerned. My primary objective is to first save a backup of my phone. Since I am such a noob I don’t even know what a backup file extension is named (for example a backup for PC might be named xxxxx.img). I suspect that the backup extension file might be named xxxxx.tar.md5 but I still don’t know.
*
As I read "btemtd"instructions further I became concerned about the following items:
1) "btemtd"states in the In the 4th that one should “Now you must Root your device and install CWM recovery”. Well, since I am still such a noob I don’t know how I should root my device. Ideally, I want to make a backup of my phone (I think that will eventually be called a “nandroid”) as quickly as possible so if I inadvertently damage something during an install I will have an original source file to revert to (and hopefully be able to restore). I have a few questions:
A) Is there a special “rooting” software I should be using it or is “rooting” just a process name (like “flashing” a drive for example)? It might help me if I could have some noob instruction on how to root an i9305 without bricking it.
B) If I “root” my phone at this stage (without having made any backups other than the xxxx.qcn file) do I risk bricking my phone and not being able to revert to the stock OEM i9305 software?
2) Another area of concern was as follows. "btemtd"advocates installing the CWM (I presume that is short for clockwork module) application and provides a hyperlink for it (which I read). In this instruction it advocates downloading the file named “I9305_CWM_Recovery.tar.md5”. This is where things get a little murky and hence the advance questions (which hopefully will help other noobs beyond myself and allow "btemtd"to concentrate on the i9305 problems I couldn’t solve in a lifetime). My critical question is as follows: IF I follow the instructions that "btemtd" hyperlinked to (these instructions were posted by senior member “ausdim”) and IF I install the CWM (install via ODIN) file named “I9305_CWM_Recovery.tar.md5” WILL I be replacing my stock i9305 OEM software with this new one created as “I9305_CWM_Recovery.tar.md5”? Could you please apprise on this instruction (remember, my first goal is to make a full backup of my existing stock i9305 OEM software on the i9305 so that I can restore if I late noobify any of the instructions). I want to confirm that by proceeding with the procedures kindly laid out by audsim I will NOT be wiping out my OEM software on the i9305 supplied when the phone was new. IF the answer to that question is “YES, you will be essentially replacing the stock OEM software for the i9305” with the new one created under “I9305_CWM_Recovery.tar.md5.”” then I might have to consider the implications of losing all of the factory OEM software that came on the phone. Please note that I am hoping that this procedure will result in the phone OS changing from:
FROM: stock OEM i9305 software
TO: stock OEM i9305 software + CWM module
*
This post is lengthy, yes, but I hope accurate and hopefully it will provide some clearance, comfort, or guidance to other noobs looking to backup their phone prior to risk bricking it on more risky adventures.
Thanks in advance and donations to "btemtd" for his hard and thankful efforts.
DEVICE MODEL BUILD is as follows:
Samsung Galaxy S3 LTE Hong Kong Version
Model number:GT-19305
Android version: 4.1 .1
Baseband version: 19305ZHALl1
Kernel version
3.0.31-177985
[email protected] #1
SMP PREEMPT Thu Sep 20 23:04:05 KST 2012

First of all I am the one who made this guide with all the links to the appropriate places, You cannot see this? LOL
Anyways.... You asked
" Is there a special “rooting” software I should be using it or is “rooting” just a process name (like “flashing” a drive for example)? It might help me if I could have some noob instruction on how to root an i9305 without bricking it.
B) If I “root” my phone at this stage (without having made any backups other than the xxxx.qcn file) do I risk bricking my phone and not being able to revert to the stock OEM i9305 software?"
A)There is no special rooting software, its basically a file which you flash onto your phone which gives you the root access. If you follow the instructions 100% and nothing on your side fails well then you should not brick your device, reason people brick is becuase they have done the wrong thing or have flashed the wrong thing or it could be bad flash files. But I can confirm none of these files are bad as they have all been used with success.
B) we would hope that the qcn is enough, but maybe not. Only because we have not seen it happen yet, everyone who has lost imei so far has made the mistake and not made any type of backup, But lyriquid says JUST TO MAKE SURE you should also backup those partitions after u root just incase it comes to the point where you need them.
You want a Noob instruction on how to root without bricking it? ummmm What the hell is that! LOL Mate this guide is almost as NOOB as it gets, and OF COURSE if you follow this guide and all the links you wont brick it.
Reason you want root is this will then allow you to further back up the partitions and also allow you to make a nandroid (FULL BACKUP) of your current software/ROM
Only way to do this FULL BACKUP is by having CWM installed:
CWM is NOT firmware it is only recovery module, CWM will only replace your stock recovery module it is Only 7mb. it will NOT replace your stock firmware. Also this recovery module has much more capabilities then your stock recovery. It will also allow you to flash Mods, tweaks,roms if you wish to do so in the future.
Even if you do all of this you can still even return it back to OEM with stock recovery firmware and UNROOT. anything is possible. So my recommendations if you want to start flashing software and want to backup your rom is to follow my steps fully in this thread and click on the links and follow those guides as well. Each link will guide you as well. Once you have root and CWM installed and you want to make a FULL BACKUP of your OEM Softwareall you need to do is boot into recovery mode, then choose Backup/restore and then >>> Backup Thats it very simple which is why i didn't include it in the thread because as soon as you go into recovery mode you will be able to figure it out yourself
By the end of all this procedure you will have
Rooted Stock OEM software + CWM REcovery
EDIT: I reccomend you do what the full guide says, and install a terminal emulator because you dont need to learn code Lyriquidperfection has written down exactly what you type inside the terminal and thats IT your done. Its that easy!!!

For now you type the commands anyway. I am working on updating EFS Pro to have Qualcomm support so you can back up all NV Items from there and also backup and restore other important partitions just with a few clicks. I'll keep everyone updated when something good enough for a beta develops.
Sent from my GT-I9305 using Tapatalk 2

lyriquidperfection said:
For now you type the commands anyway. I am working on updating EFS Pro to have Qualcomm support so you can back up all NV Items from there and also backup and restore other important partitions just with a few clicks. I'll keep everyone updated when something good enough for a beta develops.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
This would be awesome. must say

Thanks btemtd, great post!
I am also a recent convert (from iphone) to a galaxy s3 and have an i9305T model. I have been doing a bit of research in order to prepare myself to safely root my phone and was stoked to see such a helpful post. I will admit that I am also a noob with this sort of stuff but still do my best to learn what I can.
I just wanted to confirm that the process you have listed will support my aforementioned phone model with telstra as the carrier? I only ask because I remember a previous rooting guide that was only applicable to Optus phones and just want to make sure.
Thanks again for your help

Yes this will work on all i9305 models. No probs bro i was starting to get amazed on how many ppl were flashing the wrong stuff and braking there imei lol so i thought this may come handy
Sent from my GT-I9305 using xda app-developers app

nvmd, stupid noob
Sorry about this post. Misread something between steps 4 and 5.
Now fully rooted. Thanks for the great post. Very helpful to someone entirely new to this daunting process. Makes jailbreaking a walk in the park xD

Unroot
"btemtd" Thanks for you above tutorial.
Is it possible to add and process on how to unroot the GT-i9305, if required

Thanks btemtd, I am working on a YouTube Video, to help noobs like me to root their I9305. Would I be able to pm you just incase I need some help on anything regards to rooting and roming?

bleepsake said:
Thanks btemtd, I am working on a YouTube Video, to help noobs like me to root their I9305. Would I be able to pm you just incase I need some help on anything regards to rooting and roming?
Click to expand...
Click to collapse
yes offcourse you can PM me.. Thats a good Idea I might add your video to this guide if you dont mind, this will make it totally complete!!...

FOR NOOBS only
This is written by a noob for other noobs. It contains a set of very detailed instructions and is compilation of varies inputs from lyriquidperfection, audsim, btemtd, and nnnevvv. Without them I would be nowhere. I hope this guide, despite being very detailed, can help others so they don't have to hunt and pester devs for answer. This guide is only an expansion and extrapolation of this post which was kindly created by btemtd.
*
It also involves other work from the developers I credited above.
*
This guide is NOT for you if you have:
1) Bricked your phone
2) have an i9300
3) lost your IMEI
4) installed a custom ROM
5) already have CWM or SU installed.
*
Please remember it is only an expanded set of instructions built upon btemtd original work. Its only intention is to help get it done, right, without using up other's time. If the thread creator or OP ed suggests I amend or remove anything please let me know.
*
Pre-install instructions:
1) Your device is NOT bricked and is running stock OEM i9305 installed software with details for the device posted at the end of this reply.
2) Prior to doing ANYTHING you can Dial *#7284# on device and can see the 'Qualcomm USB Settings' button
3) KIES drivers installed and i9305 to PC works in KIES application OR you have verified that USB drivers work fine for PC to device
4) You have downloaded on to your PC the Odin3 v3.04. application.
5) You have downloaded the I9305_CWM_Recovery.tar.md5 file to your PC.
6) You downloaded the CWM-SuperSU-v0.96. zip file and stored it on the device’s internal memory card. You can store it directly on the device’s INTERNAL SD card (don’t worry, CWM will allow you to navigate to it).
7) You don’t care about losing any of the media or pictures or applications (whatsapp) installed on my device as these can all be reinstalled later on.
8) Battery is charged to 80 percent or more
9) Solid dual use power and data cable tested and working.
10) Back up all of the contacts to SIM Card in case Data wipe.
11) You are okay with warranty being void and binary counter reset being added
Installation procedure
1) Get coffee
2) Install the latest version of Samsung KIES and check that complete cable communication works and that all drivers on the PC are installed. Confirm that KIES communicates with device on PC. DO NOT update your device using KIES to the latest Samsung or Android software.
3) install QPST v2.7.378 program on your PC. The QPST software is a qualcomm product and is a diagnostic tool that has a variety of subtools that you can use to test, manage and edit the form factor device. Click the setup.exe file and follow instructions. This is a qualcomm product and it is not complicated. A user manual (in case you feel like exploring) is available in .pdf.
4) Dial *#7284# on your device to access DeviceUtil and select 'Qualcomm USB Settings' at the bottom. Now scroll down and select 'RNDIS + DM + MODEM' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit DeviceUtil. Your device is now in DIAG Mode.
5) Connect your device to PC via USB. Note, it may showing “loading drivers” on your PC. Wait for USB drivers to load and install.
6) Find the QPST application on your PC and navigate to the 'QPST Configuration' menu. Select it and navigate to the 'Ports' tab. Press 'Add New Port...' button. Select the COM Port that has 'USB/QC Diagnostic' next to it, change the Port Label name (if you wish to) to 'Samsung GT-I9305 diagnostic” then press 'OK'. You should now see your device listed in the 'Ports' tab and the 'State' should indicate 'Enabled'. Close this QPST application.
7) The next step will help you to BACK UP the IMEI/NV Data.
8) Go back to the QPST application Folder and navigate to the 'Software Download' application and then select the 'Backup' tab. You will need to select and name the file. I chose “i9305-qcn-back-up-file.qcn”. Press the 'Browse' button and select a Save Location for your QCN File. Press the 'Start' button and wait for it to finish. DON’T TOUCH YOUR DEVICE during this process. This will back up all your devices NV Items and save them to the QCN Backup File you just named. The resulting QCN Backup File should be about 250KB in size. The QPST application will show the backup has been completed. Verify that the file was actually backed up by looking in the directory to where you selected to store it. Then close the program.
9) The next step will help you to check to RESTORING IMEI / NV Data:
10) Go back to the QPST application Folder and navigate to the 'Software Download' application and then select the ‘Restore’ tab. Press the 'Browse' button and search for the QCN Backup File you created (remember I named mine “i9305-qcn-back-up-file.qcn”). Press the 'Start' button and wait for it to finish. This will restore all your devices NV Items from the QCN Backup File. Your IMEI / NV Data should now be fully restored. Dial *#06# on your device's keypad to check your IMEI is restored. It should show your 17 digit long IMEI number on screen. Write it down and store for future purposes in case you need to recall it one day.
11) The next step is to Restore the USB Settings after you have performed the above QPST Backup / Restore procedure. Dial *#7284# on your device to access DeviceUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit DeviceUtil. The device will reboot as you ask it to save and reset. Your device is now back to default USB operation.
12) Exit the QPST application.
13) The next step is to install ODIN which you will use to flash the CWM files from your PC to the device.
* Note that ODIN packages can be device specific. For the GT-i9305 I used “Odin3 v3.04.exe”. Navigate to where you have stored the ODIN application and select “Odin3 v3.04.exe” file and double click. ODIN will open.
NOTE: ODIN will not self install on your computer like a standard-install.exe folder. You will need to run the “Odin3 v3.04.exe” file every time to open ODIN up. Forgive my noobness for not knowing what the name of this procedure it.
14) Search for the ‘ I9305_CWM_Recovery.tar.md5 ‘ file you have downloaded previously in the “pre-install” instructions. For logistics purposes you may wish to drag and drop this file from its current storage location over the ODIN folder directory.
15) If KIES is running shut it down or suppress it on your PC.
16) The next step will involve “installing” the ‘ I9305_CWM_Recovery.tar.md5’ file. Actually, this is just a “module” that is intended to “replace” the stock recovery module. To do this, you will need to first set up your device to boot in what is called the “download” mode. To do this you must: POWER off the device first. Then after power is completely off, PRESS and HOLD the ‘power’ + ‘volume down’ + ‘home’ buttons all at the same time. I suggest that you start by pressing the “volume” + “home” buttons first instead of pressing the “power” button as you may inadvertently just power the device up (instead of booting it up into “download” mode). If you did it right you will boot up in “download” mode and Android will then ask if you if you “want to download a custom OS”. You will confirm “continue” by pressing the volume up key.
NOTE: it’s possible your PC computer may want to install device driver software. If so, just let it install and wait for it to finish.
NOTE: to navigate the menus in “download” mode (and also in “recovery” mode) you should use the VolUp / VolDown to go “up” or “down” the menu. Press the “power” button to select items (kind of like a “go” or “enter” function).
17) Now Connect your device (make sure battery is at least 80% charged) to your PC ( it is preferable to connect directly to the computer and not through a USB HUB or port replicator).
18) Open the ODIN application by navigating to the Odin3 v3.04.exe file . Make sure your device is detected and you should see a blue (older models may show yellow color) square in the top left corner.
NOTE: Make sure only the “auto-reboot” and “f reset time” boxes should be checked in the ODIN Application.
19) Click on the box next to “PDA”. And then click the “PDA” and navigate to the area where the ‘ I9305_CWM_Recovery.tar.md5’ file is stored. Select it and it will auto populate into the ODIN application. Then, on the ODIN application, press “start”. You will see a series of command actions showing in the ODIN Application which should show the status. Upon completion it should show that CWM was installed in the ODIN application. You may have to repeat this process once again as CWM may not “stick”.
20) There has been considerable debate about different units requiring the battery to be pulled due to the fact that some factory units have been shown to reboot back into its own factory state and therefore exclude the CWM file that you just tried to install in the previous steps. I read of many users who were experiencing this problem. See For further reading please see: http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1 to show how to deal with and manage this problem. I, along with another user that I confirmed with, DID NOT have to do the battery pull method. Why? Well, I think that some factory models require this process and others do not. My device (specifications at end of post) did not require it. Also, the problem may have been created by user’s updating their device software through the KIES application which I recommend not doing until the device has been rooted and CWM and SU installed in this process.
21) After instructing ODIN to install the ‘ I9305_CWM_Recovery.tar.md5’ onto the device the device should reboot. If it does not reboot after awhile you can power down your device. What will happen? Well, you have either successfully installed the ‘ I9305_CWM_Recovery.tar.md5’ file or your device has reverted back to the factory restore option. You shouldn’t have much risk of bricking the device during this step. The key is to get the ‘ I9305_CWM_Recovery.tar.md5’ file to stick during the “download” process. If it does not stick you will need to refer to the thread For further reading please see: http://forum.xda-developers.com/showpost.php?p=32235061&postcount=1 as to how to employ the “2 different battery pull during the reboot process” methods he suggested (again, fortunately I did not need to do this).
22) Now you need to put the device in “recovery mode”. Unplug the device from the USB Cable attached to the PC. To put it in recovery mode you must: POWER off the device and the PRESS and HOLD the ‘power’ + ‘volume up’ + ‘home’ buttons all at the same time. Again, I suggest that you start by pressing the “volume” + “home” buttons first instead of pressing the “power” button as you may inadvertently just power the device up (instead of booting it up into “recovery” mode). If you did it right you will boot up in “recovery” mode and you will clearly see the words “CWM-based Recovery” written in white on the top line. If you don’t see that then your installation of the ‘ I9305_CWM_Recovery.tar.md5’ did not work and you will need to repeat the steps above until you get it right.
23) Next you will be installing the SUSuperuser module while your device is in "recovery mode". Remember you should have stored the “CWM-SuperSU-v0.96.zip” (DO NOT unzip it yourself) on the Device’s internal memory card. Using the volume up/down keys and the “power” button for enter/go you should scroll down and select menu option "install zip from SD card"
select menu option "choose zip from internal SD card"
scroll down to the “CWM-SuperSU-v0.96.zip file and select that using the “power” button. It will then ask you “if you are sure you want to install, it can’t be done”. Scroll down to the “YES” and then select the power button to confirm. It will then mount and install it. Once it is done installing you will then need to scroll to the “go back” choice on the menu. Then go back to the “reboot” device and select that. It will reboot.
24) Your device should reboot and you should be able to confirm that SUSuperuser is installed by looking at the apps page on your device. You should be able to see a little blue Android with a red cape. If you see it, you have successfully installed.
25) Once you have root and CWM + SU installed and you want to make a FULL BACKUP of your settings and software. Using the same methods above, boot into “recovery mode”, then choose Backup/restore (select it with the “power button”). Then, it will begin the “back up” process which will take about (7 ) minutes (it takes longer if you are backing up lots of items). Note that the program will back up the backup items onto the EXTERNAL SD Card in a folder named “2012-11-07.10.57.45 (“time stamped”) and it will contain 6 items including boot image, recovery image, nandroid.md5, and 3 others. Mine was about 1.17 gb in size and DID NOT include any music, videos, or pictures. MAKE SURE that your external SD Card has enough free space to store the CWM back up folders. I suggest that you then copy the entire back up folder over to another secure location on your PC (which you can copy over to the SD card anytime) in the event your current external SD card or device goes whacky.
26) Well, it was not brief but it was detailed and concise and I hope it helps other noobs like myself to successfully install and execute this process as it will lead to further dev opportunities to trying out other ROM’s while being able to reverse the process if things goes really wrong.
27) If I was of help just say “thanks”. Will try to answer PM if you have them but I am just a noob and may be of little use. This was written by a noob and for other noobs. Hope I haven’t annoyed anyone else in the process.
*
Model number:GT-I9305
Android version: 4.1 .1
Baseband version: I9305ZHALI1
Kernel version
3.0.31-177985
[email protected] #1
SMP PREEMPT Thu Sep 20 23:04:05 KST 2012
Build number: JRO03C.I9305ZHALI7

Woahh thats alot of writing, but thanks for your time, I didnt know that myself and the guides in the links that LyriquidPerfection and Ausdim created were that hard to understand But i guess I dont know how a PURE noob thinks, Even though I was a noob in August this year i kind of know my way around a computer but I still think i am a noob compared to these programming devs, Maybe I am not the Noobiest noob anymore if thats a word LOL oh well the more information in this thread the more valuable. I think they should get this entire thread Stickied, I have already asked

btemtd said:
yes offcourse you can PM me.. Thats a good Idea I might add your video to this guide if you dont mind, this will make it totally complete!!...
Click to expand...
Click to collapse
Thanks buddy. Of course I dont mind you adding the video to this thread. I want to make a few videos actually that you might be able to help with. =)
working on a pm now.
Sent from my Beautiful GT-I9305 using Tapatalk

Ok I will reply when I wake up thanks
Sent from my GT-I9305 using xda app-developers app

hey droid!
This is awesome, I hope I can use this for my youtube guide for iOS refugees like me.
Sent from my Beautiful GT-I9305 using Tapatalk

bleepsake, can't wait to see your video.
Is unrooting unique per phone or is it the same? When I search unroot, I've seen guides to unroot only for certain phones.

mrbarbz said:
bleepsake, can't wait to see your video.
Is unrooting unique per phone or is it the same? When I search unroot, I've seen guides to unroot only for certain phones.
Click to expand...
Click to collapse
mrbarbs all you need to do to unroot is use odin and flash Official samsung firmware over the top of what you have. Done... its that easy no need for a guide lol
this will also get rid off CWM and put the stock original recovery back in and also stock kernel.... as a matter of fact stock EVERYTHING

[Q] Help! tried updating my samsung gt-i9000. No success..

Hi everyone I hope someone can help me resolving this problem I made myself...
I tried to install kitkat 4.4 on one old samsung S1 (the first galaxy model)
first I rooted the phone, and installed clockwork mod, and a *.zip that should contain kitkat 4.4 for the phone.
It all whent well in clockworkmod until I selected to install kitkat. It starts to install, but i get a droid with an red triangle and a exclimation mark, and then it reeboots
Is it somehow possible to reset the install and get it bak to normal? I have also the odin program. can I do something to get the phone working again?
sorry for no pics or video, but the forum didnt allow me before my 10th post..
go to youtube, search on user sixors1 and there is a video who is called cam00376. sorry for the inconvenience
thanks for reading

Haakons said:
Hi everyone I hope someone can help me resolving this problem I made myself...
I tried to install kitkat 4.4 on one old samsung S1 (the first galaxy model)
first I rooted the phone, and installed clockwork mod, and a *.zip that should contain kitkat 4.4 for the phone.
It all whent well in clockworkmod until I selected to install kitkat. It starts to install, but i get a droid with an red triangle and a exclimation mark, and then it reeboots
Is it somehow possible to reset the install and get it bak to normal? I have also the odin program. can I do something to get the phone working again?
sorry for no pics or video, but the forum didnt allow me before my 10th post..
go to youtube, search on user sixors1 and there is a video who is called cam00376. sorry for the inconvenience
thanks for reading
Click to expand...
Click to collapse
okay, listen. the first step is download the stock rom. in the link at the bottom of this post is a list of firmwares for i9000. choose the one from your region, and download it, (or i can give you a link to my firmware, its international, so it will almost certasinly work. you might have to unzip the downloaded file, but only once. inside should be a folder withe the firmware name. go into the folder, you shouild see
a bunch of files.
then go to odin, connect you phone in download mode,navigate to the folder with the firmware folders, then:
Click on “PDA” and select file with “CODE” in its name.
Click on “Phone” and select file with “MODEM” in its name. (Note: Ignore this step if you don’t able to find such file)
Click on “CSC” and select file with “CSC” in its name. (Note: Ignore this step if you don’t able to find such file)
Click on “PIT” and select “.pit” file. (Note: Ignore this step if you don’t able to find such file)
press start, and hopefully your phone will be back working again.
Firmware download link:
http://samsung-updates.com/device/?id=GT-I9000
press thanks if i helped!

Hi and thanks for your reply:good:
I was to download my stock file (region TEN), but i just came to something called rapid gator, and i entered wrong werificatin code, and was told that I have to wait one hour before trying again.. suppose thats a method for getting folks to pay for service. but why do samsung do such a thing?..
anyway, i would highly appreciate if you can send me the stock ROM

Now I was able to get the system up and runing again. I guess it has been changed since you been doing this.
I simply unzipped the package for my region and placed the zip file that was not going to unzip. When I placed this in Odin, at the pda button, it showed a *.md5 file. Set the phone in download mode, and it did the rest itself
But the reason I began doing this was that the phone dont read the sim card, and I was hoping for software malfunction, but I guess I wasnt that lucky.
Anyone who knows how I can get it to read the sim again?

Bought on Craigslist, Factory reset it, Many default apps are gone, Lots of issues?

Hey Guys,
Brand new to XDA and new to messing with my phone in anyway, I looked through some threads, but am not sure if I can mess something up worse by not following the right steps,
I basically bought a used phone on craigslist, AT&T LG G FLEX 2 - LG-H950 and when I factory reset it, many of the default apps are not installed, cannot use my calendar and the phone is just a little off all together.
Not sure if the phone is still rooted or if the factory reset cleared it, and I am all together worried that the only reason the kid sold it to me was because he messed it up and couldn't fix it and just pawned it off to my dumas
I know its frowned upon to start new threads when the answers are out there, but i need this for work ASAP and if I screw it up and cant use it all Ill have to go back to my work iPhone (last resort, i hate it)
I started to follow hyelton's video http://forum.xda-developers.com/showthread.php?t=2785089
but got cold feet when i couldnt find my exact model the h950
It is currently on the android 5.0.1 and when i tried the update before i reset it, it said i couldn't update it something about the root. So i reset it and everything is the same as when I bought it on CraigList.
How do I get it back to square one, like it came in the box. I am interested in learning how to root and be in control of my own property, but I just want to get back to the start safely without bricking it so I can follow the forums and not feel so helpless.
im sorry if the first response to this just point me to another thread, but I will appreciate even that much guidance so at least i know i am headed in the right direction
Thanks a lot xda community
Branden

Factory reset won't remove root BTW. Recent Android phones seem to perform an integrity check prior to updating that fails when root is present.
http://forum.xda-developers.com/showthread.php?t=3171550
Just read that to get the phone back to stock, then you'll be able to upgrade to 11x (5.1.1) and eventually 11z.
Sent from my LG-H950

cool, thanks, one more question
I made an account with MEGA
downloaded the Flex2Tool 1.4.1 and unzipped
downloaded the system.img.gz
Started watching your video. however i am not bricked.
it has missing default apps and it says this device is suspected in rooting, software update is not available for rooted device.
so what is my first step after downloading these files. do i connect phone to my computer and open up the flex2tool and
select variant 1 which is H950 v10d etc
then do I select 1 , ( i do not need anything on the phone.)
or move straight to variant 2. restore unroot stock system.
if i do that next where do I put the system.img.gz file on my phone. anywhere in the internal memory and before or after I reset it?
sorry for all the questions and thanks for all the help. i am very new to doing anything besides calling or texting on my phone
Branden

koronab said:
I made an account with MEGA
downloaded the Flex2Tool 1.4.1 and unzipped
downloaded the system.img.gz
Started watching your video. however i am not bricked.
it has missing default apps and it says this device is suspected in rooting, software update is not available for rooted device.
so what is my first step after downloading these files. do i connect phone to my computer and open up the flex2tool and
select variant 1 which is H950 v10d etc
then do I select 1 , ( i do not need anything on the phone.)
or move straight to variant 2. restore unroot stock system.
if i do that next where do I put the system.img.gz file on my phone. anywhere in the internal memory and before or after I reset it?
sorry for all the questions and thanks for all the help. i am very new to doing anything besides calling or texting on my phone
Branden
Click to expand...
Click to collapse
1. You first need the LG USB drivers for the Flex to be installed
2. The system image file (gz) will have a .img file inside that's about 4GB, so unzip the one you downloaded with 7zip, preferably from a PC. Put the .img file on the root of the phone's internal memory before proceeding. You'll also want USB debugging enable and disable the verify over USB option
3. Once file is on phone you can continue with the tool, it will eventually go into download mode & show ## when finished
Sent from my LG-H950

okay i did that but
I dont understand your last thing >>>>"You'll also want USB debugging enable and disable the verify over USB option"
when i have my usb connected the phone gives three options
1.Charge Phone
via usb
2.Media Sync (MTP)
3.Send images (PTP)
When restarting the recovery tool after img. has been installed to root of internal storage. do i just start program or do i need to turn off phone or reset it or just run it with the MTP

koronab said:
I dont understand your last thing >>>>"You'll also want USB debugging enable and disable the verify over USB option"
when i have my usb connected the phone gives three options
1.Charge Phone
via usb
2.Media Sync (MTP)
3.Send images (PTP)
When restarting the recovery tool after img. has been installed to root of internal storage. do i just start program or do i need to turn off phone or reset it or just run it with the MTP
Click to expand...
Click to collapse
http://i.imgur.com/ynGFv1j.jpg
Like that. Check that the USB debugging icon shows in the notification area while USB is connected as MTP. Then you can start the tool. Be sure that the .img is present on the root(sdcard0) prior to letting the tool reboot the phone.
Sent from my LG-H950

i dont see developer options
under system there is
shorcut key
date and time
accessibility
quick circle case
printing
about phone

figured it out, thanks
got it

firmware update
I am on a screen that says
FIRMWARE UPDATE
sync symbol with usb symbol
don not unplug the USB connection until the process is complete
status bar has read 0%
then there is box and in it says USER B99
the black window on my pc has the "##" and says that i can disconnect the USB cable
should i do this now or wait till something happens in the status bar on the phone

nevermind, phone stared back up
Thanks ACE I appreciate it

koronab said:
Thanks ACE I appreciate it
Click to expand...
Click to collapse
Did you remove the USB cord, then re insert after ##? The tool will reboot for you, and are you back into the OS now?
Sent from my LG-H950

yes it worked do i factory reset it now to get all the default apps working again

koronab said:
yes it worked do i factory reset it now to get all the default apps working again
Click to expand...
Click to collapse
Probably a good idea. I think the previous owner was trying to delete some of the bloatware and didn't properly restore the phone before selling it, not sure if that was done purposely or not.
Sent from my LG-H950

okay, i reset it but still dont have default apps
the default apps for the calendar which was my original issue still is not there, just a generic Android icon. because there is no default it will not allow me to sync calendars, also no default messaging app.
not sure if this just put me back to 5.0.1 which is where already was but i am still missing default apps to make the phone run smoothly,
any ideas on what i may have done wrong

koronab said:
the default apps for the calendar which was my original issue still is not there, just a generic Android icon. because there is no default it will not allow me to sync calendars, also no default messaging app.
not sure if this just put me back to 5.0.1 which is where already was but i am still missing default apps to make the phone run smoothly,
any ideas on what i may have done wrong
Click to expand...
Click to collapse
In settings -> apps -> disabled is calendar listed?
Sent from my LG-H950

7zip
i believe what is happeneing is the img file is not unzipping. i had originally just copied the img.gz file over witout unzipping it. now i am trying to unzip it but no success
do i unzip before or after i copy to root storage

koronab said:
i believe what is happeneing is the img file is not unzipping. i had originally just copied the img.gz file over witout unzipping it. now i am trying to unzip it but no success
do i unzip before or after i copy to root storage
Click to expand...
Click to collapse
Dude , you are new in Android? XD
Yes you need to unzip that file before run the tool
Sent from my Redmi Note 2

Super noob
Looks like it came unzipped when I downloaded from Mega. Icon is a blank paper folded too right corner and reads system.img.gz and 1.6 gb which is what I copied to the root storage and then followed everything else and did it again starting from scratch and still have generic icon without the default apps like calendar, browser, and messaging. I'm trying tho. Been reading forums since last night with no luck
I do appreciate everyone's help tho,
And ace there is no calendar under apps

koronab said:
Looks like it came unzipped when I downloaded from Mega. Icon is a blank paper folded too right corner and reads system.img.gz and 1.6 gb which is what I copied to the root storage and then followed everything else and did it again starting from scratch and still have generic icon without the default apps like calendar, browser, and messaging. I'm trying tho. Been reading forums since last night with no luck
I do appreciate everyone's help tho,
And ace there is no calendar under apps
Click to expand...
Click to collapse
You need to unzip that file
.gz like .rar or .zip are different types of compression, so download the latest version of winrar or use 7zip, you need the system.img file (4gb)
Sent from my Redmi Note 2

THANKS
Sj12345 said:
You need to unzip that file
.gz like .rar or .zip are different types of compression, so download the latest version of winrar or use 7zip, you need the system.img file (4gb)
Sent from my Redmi Note 2
Click to expand...
Click to collapse
finally did it. Thanks alot you and ace were a life saver