Database Info

i little problem i encountered :/

I just got a new mytouch because i lost my old one :/
last time i did the rooting through the gold card method, now i tried the one click method and it went horribly wrong, i belive i got root, i tried to boot up with a new image but i just stays stuck on the mytouch logo, i can go into fastboot, but when i try to go through fastboot through my computer, the computer doesn't recognize my phone(it doesnt show the serial number) should i install the drives all over again? right now i have i connected to my computer through usb, and it says "fastboot usb".
i have looked though the forums but i didnt find a specific answer, so please if im going to get bombed, all im asking is for a little help.
thanks in advance

ok so..
ok so i fixed my drivers and it detects my phone, but now when i am trying to fastboot it it doesnt let me

you are sure you installed the drivers correctly? can you make it to the recovery screen?

if u try adb devices in cmd using adb from sdk does it give you something like HT9623465? cos that should be fine, also if you're using the sdk try uninstall the driver and then copy the 'usb driver' folder contents from the sdk into the 'tools' folder so everythings in the same place and then refer to that directory for driver installation (windows detects it as android 1.0 device when in fastboot and the drivers are different from normal mode). forgive me if im wrong

USB not recognized + no Recovery

Hi All,
It has been a time that I unlocked my TF700t then followed the CM10 documentation to install 10.0 using CWM.
Recently I wanted to upgrade to 10.1 but it didn't work and ended with my tablet rebooting undefinitely.
I reverted then to install back the ASUS stock Rom from their website :
- I downloaded the file
- unzipped it (since it contains another zip)
- put it on a micro SD
- Booted into CWM
- installed the zip
I ended with a working tablet on the stock rom JB 4.1 but know I wanted to try again CM but I cannot access recovery anymore. I can access the bootloader but when I select RCK I get the droid laying on his back with the warning sign.
I thought I would need to flash another recovery (TWRP or other) using fastboot but now when I plug the tablet to my PC it keeps telling me that the device is not recognized. I tried to install the USB driver but it doesn't get detected.
Can anyone please help ? The tablet is working but I am afraid that it has lost some of its capabilities.
Thanks
Nacef

nacef_l said:
Hi All,
It has been a time that I unlocked my TF700t then followed the CM10 documentation to install 10.0 using CWM.
Recently I wanted to upgrade to 10.1 but it didn't work and ended with my tablet rebooting undefinitely.
I reverted then to install back the ASUS stock Rom from their website :
- I downloaded the file
- unzipped it (since it contains another zip)
- put it on a micro SD
- Booted into CWM
- installed the zip
I ended with a working tablet on the stock rom JB 4.1 but know I wanted to try again CM but I cannot access recovery anymore. I can access the bootloader but when I select RCK I get the droid laying on his back with the warning sign.
I thought I would need to flash another recovery (TWRP or other) using fastboot but now when I plug the tablet to my PC it keeps telling me that the device is not recognized. I tried to install the USB driver but it doesn't get detected.
Can anyone please help ? The tablet is working but I am afraid that it has lost some of its capabilities.
Thanks
Nacef
Click to expand...
Click to collapse
Go to your system setting and select storage. Click the 3 dots in the upper right corner and tick the box which is Media device (MTP).. Good luck..

LetMeKnow said:
Go to your system setting and select storage. Click the 3 dots in the upper right corner and tick the box which is Media device (MTP).. Good luck..
Click to expand...
Click to collapse
I just tried that but it did not work, windows is still displaying USB device not recognized.

nacef_l said:
I just tried that but it did not work, windows is still displaying USB device not recognized.
Click to expand...
Click to collapse
What Windows version are you running?
You may have to uninstall the drivers for your MTP device before installing new ones as well as disabling Windows to automatically install drivers for a new device, then manually point it to the Universal Naked Drivers folder.
Or downlaod Android SDK tool ad through it the Platform Tools and USB drivers.
BTW: When you flashed the stock firmware you lost your custom recovery. That's why you see the dead Droid - it's the stock recovery.
If you can't get fastboot to work you can use Motochopper to root your JB 4.1 stock firmware and then GooManager to install the latest TWRP recovery.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

I have tested it on WinXP, Win7, Ubuntu and another box with Win XP. Always same thing the device is not recognized.
When I try to update the driver and point it manually to the naked drivers it cannot detect them.
I guess that even for running Motochopper I will need to get USB working to be able to root my device.
Any help please ? I am stuck with a sluggish stock mod that buries the perfs of my device.

nacef_l said:
I have tested it on WinXP, Win7, Ubuntu and another box with Win XP. Always same thing the device is not recognized.
When I try to update the driver and point it manually to the naked drivers it cannot detect them.
I guess that even for running Motochopper I will need to get USB working to be able to root my device.
Any help please ? I am stuck with a sluggish stock mod that buries the perfs of my device.
Click to expand...
Click to collapse
You do have USB debugging enabled in the Developer settings, do you?
Sent from my DROID4 using Tapatalk 2

berndblb said:
You do have USB debugging enabled in the Developer settings, do you?
Sent from my DROID4 using Tapatalk 2
Click to expand...
Click to collapse
Yes checked and double checked that

nacef_l said:
Yes checked and double checked that
Click to expand...
Click to collapse
Then it's a driver problem and it's solvable. What do you see in Device Manager under Portable Devices with your tablet connected? Did you uninstall the driver and re-install it?
Did you try to install Asus Sync (which should give you compatible drivers for the TF700)?
So many driver problems lately... there's got to be a pattern to it, but what it may be beats me :what:
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

berndblb said:
Then it's a driver problem and it's solvable. What do you see in Device Manager under Portable Devices with your tablet connected? Did you uninstall the driver and re-install it?
Did you try to install Asus Sync (which should give you compatible drivers for the TF700)?
So many driver problems lately... there's got to be a pattern to it, but what it may be beats me :what:
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
In the Device Manager I have nothing under Portable Devices, but under USB devices it appears an Unrecognized USB Device and a bubble notifying about an unrecognized USB device keeps popping in the task bar. Even after installing ASUS Sync it is not detected.

nacef_l said:
In the Device Manager I have nothing under Portable Devices, but under USB devices it appears an Unrecognized USB Device and a bubble notifying about an unrecognized USB device keeps popping in the task bar. Even after installing ASUS Sync it is not detected.
Click to expand...
Click to collapse
You don't connect your tablet to the PC through the dock USB port, do you?? Just had that in another thread....
If you connect the tablet directly, I'm stumped. No idea why it's not recognized...
Sent from my DROID4 using Tapatalk 2

berndblb said:
You don't connect your tablet to the PC through the dock USB port, do you?? Just had that in another thread....
If you connect the tablet directly, I'm stumped. No idea why it's not recognized...
Sent from my DROID4 using Tapatalk 2
Click to expand...
Click to collapse
I don't have a dock and I am connecting directly with the cable. I have just reflashed it to stock rom again hoping it resolves itself but nothing.
It's driving me crazy. The stock rom is really sluggish and I want to flash it to CM

Sounds like a windows driver issue to me. You need to force windows to use the right usb drivers. You normally do this by upgrading thenm in device manager. You may have a borked windows installation to fix as well..
Try the ones I have attached.

sbdags said:
Sounds like a windows driver issue to me. You need to force windows to use the right usb drivers. You normally do this by upgrading thenm in device manager. You may have a borked windows installation to fix as well..
Try the ones I have attached.
Click to expand...
Click to collapse
I have tried different windows installations with the different drivers that you provided me, still nothing. It seems to me that the device is not even sending proper ids to the system. Can it be caused by a damaged cable ?
Sent from my iPhone using Tapatalk - now Free

Had the same problem.I fixed it by uninstalling the faulty usb device. Then disconnected the usb cable. Reconnected. And the drivers installed.

nacef_l said:
I have tried different windows installations with the different drivers that you provided me, still nothing. It seems to me that the device is not even sending proper ids to the system. Can it be caused by a damaged cable ?
Click to expand...
Click to collapse
Im having the same problem and after one day of research I could not find a solution. I bought a use TF700 with a standard andriod on it, no mod, not unlocked, no root. When I connect it to the pc I get the same error, meaning just a USB Device showing up. Tried different PC's with different types of OS, no success.
Did you manage to fix the problem ? I would really appreciate some help because now I can't use that tablet in debug mode to test my android applications and that's all I bought it for. By the way, is there a adb tool that works wireless and doesn't neet root access or can I get root access without connecting my pad to my pc ?
Thanks for the help !

Well did you install adb fastboot drivers on the PCs you tried? Did you try it under Linux? Do you have the original Asus cable you connect it with?
adb over network is an option under Developer Options in Omni and Omni based roms - at least the LP roms. I don't think you can get that with an app you install. Probably needs to be baked into the kernel.

berndblb said:
Well did you install adb fastboot drivers on the PCs you tried? Did you try it under Linux? Do you have the original Asus cable you connect it with?
adb over network is an option under Developer Options in Omni and Omni based roms - at least the LP roms. I don't think you can get that with an app you install. Probably needs to be baked into the kernel.
Click to expand...
Click to collapse
First of all thanks a lot for your response, didn't think anyone would still react on that post because it's quite old. Yes I did install adb fastboot drivers, the device only shows up in the usb section saying usb device not recognized. I tried nearly every driver I found, installed the Andriod SDK, the Asus Sync Tool, the naked drivers... then removed them all (including the hidden ones) and installed just the adb fastboot -> no success. I have not tried it on linux, but on windows 7, 8 and 10. Android version is 4.2.1 and Build is 10.6.1.14.10. I now unlocked it using the apk provided by asus (version 7 , 8 did not work). Still for rooting I need pc connection, so I ordered a new cable today (cable is original Asus though).
I installed the Rom Manager and that tells me the ClockworkMod Recovery and TWRP are already installed. I also tried that recovery (power + vol) and got the same result as nacef meaning " I can access the bootloader but when I select RCK I get the droid laying on his back with the warning sign." Thing is, I don't know what the previews owner did, so it might be the reason he sold the Tablet. Can I get anywhere form that Bootloader ? Maybe boot as a Superuser and then use wireless adb to root the device ?
Thanks a lot for your help, Im feeling that I have wasted the money and the only way to get rid of that feeling is to fix the problem

Grab the Puppy Linux live CD from here: http://www.transformerforums.com/fo...t/46090-guide-adb-fastboot-linux-live-cd.html
It has adb fastboot already installed. If you don't get a connection with that one the problem would be tablet side, not Windows related.

I booted using that Puppy Linux and followed the Guide but no success. After entering "adb devices" I get the output "list of adb devices attached" and than a blank space. So I tried booting in fastboot like you described in your guide and entered "fastboot devices" but that also gives me nothing. Fastboot works though (as it's already included in that image) so I tried a bunch of other fastboot commands but that just results in "waiting for the device".
I don't know what to do now, it has something to do with the tablet itself. Im waiting for the new cable but don't think thats gonna change anything.

You are not trying to do this through the dock port, right? You are connecting the tablet directly to the PC?
The only answer I have left is either a broken cable or one of the pins in the port is bent or broken. Get a magnifying glass and check them out.

[Q] LG-P506 Fastboot Can See My Device But Won't Show The Serial Number

So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.

baked cake said:
So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.
Click to expand...
Click to collapse
fastboot doesn't show a serial number for that device. At least never has for me. If 'fastboot devices' lists something like
Code:
List of devices attached
???????? fastboot
then you're good to go.

damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.

baked cake said:
damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.
Click to expand...
Click to collapse
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.

shinobisoft said:
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.
Click to expand...
Click to collapse
ill give it a try, but i have tried just about every recovery file i can get my hands on and no luck, also looks like winds 8 doesn't want to acknowledge my phones existence. I downloaded and installed the driver from LG but still no luck, windows 8 is giving me a failed descriptor error as well.

ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.

baked cake said:
ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.
Click to expand...
Click to collapse
I'd say that was/is the correct port name. I don't have that device anymore so I cannot say for sure.
Sent from my LG-P769 using Tapatalk

ok, so this is a follow up on some things i have tried recently.
Since my last post i have:
1. put the sdcard into my tablet, and formatted it/ ran an error scan on it via windows.
2. i then flashed a recovery file via my phones fastboot, i pulled that card put it back in tablet to see what files it installed.
3. according to windows, flash recovery installed a .LOST folder with nothing in it, which is the same thing my tablet has on its internal memory, so i don't think there's anything wrong there.
4. phone still cant boot past LG logo(or recovery), or charge the battery when plugged in.
5. I still get a stall get_descriptor error when connected via usb, and commands such as fastboot reboot don't work, tho the phone will say its rebooting (it says its rebooting then just sits there and does nothing, command prompt will say action completed).
6. one thing i have tried as well, is telling windows not to automatically install drivers, then uninstalling my phone from device manager.
Whats interesting about this was that windows was installing its own ADB modem driver from it's own library every time i plugged in the phone. After disabling auto drivers, and reinstalling my LG drivers, the phone simply remains an unknown device.
Some things I have tried include pointing windows to the driver folder, both the downloaded folder and the folder windows installed it to. Neither worked.
The next thing I tried is the have disc option on both. Although there are setup information files in the install folder (about 50 of em), pointing the phone to each file one at a time did not work.
What did work, interesting enough was pointing the phone to a set of Naked Drivers I downloaded, although none of those drivers are specifically for my phone, and they only gave me the same problem I had when i had windows auto installing its own driver.

LG L5 612 - fastboot issue
Hi,
I have an LG L5 612.
I'm trying to perform below actions, but always get "waiting for device" ... and nothing happens.
fastboot reboot-bootloader
fastboot flash boot boot.img
"adb devices" lists my device correctly, while "fastboot devices" output nothing.
C:\ADB>adb devices
List of devices attached
LGOTMS840b676a device
C:\ADB>fastboot devices
C:\ADB>
C:\ADB>fastboot reboot-bootloader
< waiting for device >

[Q] fastboot, win7/64 drivers?

Hey all,
I've got a new-to-me TF700. Got CROMBi-KK installed, which took some backflips as I could not get fastboot connectivity.
I'd like to be setup for NvFlash (but then never need it), so even though I don't need fastboot right now, I'm feeling the lack.
Data transfer works fine.
ADB (not fastboot) works fine (adb shell gets me a shell, etc, etc)
When I put the phone in fastboot/bootloader "fastboot devices" gets an empty response "fastboot reboot" gets no response.
In Win7 device manager, the TF700, which appears in the "portable devices" section normally when I plug it in, does not appear.
So... probably device drivers.
Have you had this problem on your w7/64 box? How did you fix it? Sorry, but "install linux" isn't all that helpful.
Thanks!

From a semi-related question I'd asked, berndblb mentioned
berndblb said:
Windows is infamous for driver problems.....
Connect the tab in fastboot and open device manager. Near the top you should have an entry for Android device, bootloader mode or something similar, and probably a yellow ! next to it.
Right click it and choose "update driver", let Windows search for it.
If you're lucky it'll install the driver by itself.
If not: What Windows version are you running?
Click to expand...
Click to collapse
Yep, I get an "unknown device" in the USB section when I connect a TF700 in fastboot. Win can't find an appropriate driver. I've tried (manually) ASUS_Android_USB_Drivers and Universal_Naked_Driver_0.72 (both, AFAIR, from the xda tf700 forums). Neither worked.
So... if you got this going, what driver did you use? Thx!

I have a Win7 32 bit laptop and this cool little tool installed the drivers for me:
http://forum.xda-developers.com/showthread.php?t=2588979

berndblb said:
http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
I'd installed that previously (easiest way to setup fastboot). Re-downloaded, re-installed. Went fine. Still no fastboot.
Unzipped the exe, looked at the drivers being installed - labeled "google". No google driver in the driver cache (so no device ever associated with it.)
Looked at the driver error again. Code 43. That means hardware or driver. I'd been taking it to mean driver, but... switched the USB cable to a port in the rear of the PC - and it worked.
Thanks!
So, for anybody with a similar issue, install the package above. If that doesn't work, maybe try a different USB port.

[Q] Computer will not see tf300t in fastboot

hey i've tried searching the forum and couldn't find anything the helped.
i'm trying to load a custom ROM on my transformer but i can not get my computer to recognize my tablet in fastboot
i have already unlocked the device. i can get the bootloader menu on the tablet but when it's connected to my computer and i go into cmd i will type fastboot devices and it doesn't see anything it just goes straight to the next prompt.
i'd tried reloading the drivers and this has not worked either.
any ideas?

trinity343 said:
hey i've tried searching the forum and couldn't find anything the helped.
i'm trying to load a custom ROM on my transformer but i can not get my computer to recognize my tablet in fastboot
i have already unlocked the device. i can get the bootloader menu on the tablet but when it's connected to my computer and i go into cmd i will type fastboot devices and it doesn't see anything it just goes straight to the next prompt.
i'd tried reloading the drivers and this has not worked either.
any ideas?
Click to expand...
Click to collapse
Try using a different USB port or cable. What does the device show up as in device manager on your computer?

cmendonc2 said:
Try using a different USB port or cable. What does the device show up as in device manager on your computer?
Click to expand...
Click to collapse
i'll try a different port but the computer does recognize the tablet plugged in when it's fully booted. had it listed as Asus Transformer TF300T.
don't have another cable i can use.

trinity343 said:
i'll try a different port but the computer does recognize the tablet plugged in when it's fully booted. had it listed as Asus Transformer TF300T.
don't have another cable i can use.
Click to expand...
Click to collapse
Are you using the full Android SDK for fastboot or one of the minimal versions? You may want to try a minimal version to get a fresh install of fastboot. http://forum.xda-developers.com/showthread.php?t=2317790

cmendonc2 said:
Are you using the full Android SDK for fastboot or one of the minimal versions? You may want to try a minimal version to get a fresh install of fastboot. http://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
Using a minimal that i installed a while ago. though now that i'm thinking about it my desktop didn't recognize my last phone either. had to do it on my laptop

trinity343 said:
Using a minimal that i installed a while ago. though now that i'm thinking about it my desktop didn't recognize my last phone either. had to do it on my laptop
Click to expand...
Click to collapse
Yeah you may want to give that minimal a reinstall or install a newer version of it.