Someone please help me on this!!
Ok so we are all familiar with the jaggy jags method of rooting our explorer.. Now my question is for adding recovery! We download the rar file into a folder and just run the batch file to add recovery.. And if I want to add some other recovery like twrp I just replace the recovery file with twrp's... So If I want to add recovery to my friend's wildfire s, can I use this jaggy's method and replace the recovery file of wildfire s Cwm to this folder of explorer extracted from jaggy's rar and run the batch to add recovery??
Anyone?? :crying:
No. That would probably result in a brick. Search for a CWM port suitable with Wildfire.
xpmode said:
No. That would probably result in a brick. Search for a CWM port suitable with Wildfire.
Click to expand...
Click to collapse
are u sure??im talking about replacing recovery file of pico with recovery file of wildfire s!! the batch just run commands !
Related
Hi there, I have tried to search for this issue but I haven't found anything...
I'm currently following this guide (http://forum.xda-developers.com/showthread.php?t=1192300), and have successfully made my device S-OFF.
I can't find the PG58IMG file when trying to flash CWM, the two files I can see are:
recovery-clockwork-5.0.0.8-pyramid.img
and
recovery-clockwork-5.0.0.8-pyramid.zip
Which one do I download, and do I simply rename it? What about the file extension?
Thanks in advance.
I'm a noob...
I just bought a new HTC Sensation, and didn't find what so called PG58IMG.
Just
recovery-clockwork-5.0.0.8-pyramid.img
and
recovery-clockwork-5.0.0.8-pyramid.zip.
Can Anybody help?
Simply rename the .zip file to PG58IMG.zip. make sure it's not PG58IMG.zip.zip. then place it on the root of your sd card, boot the phone into bootloader and select yes with the volume and power buttons when asked to update.
Easy as that ;-)
Sent from my HTC Sensation using XDA
hi
I downloaded arabic stock rom from htcdev.com but it isn't a zip file :crying:
how can I install it?
my bootloader is unlock and I'm using jaggyrom 3.2
the stock rom has this name:
pico-2.6.38-gb-crc-6dd95d7.tar.gz
Double click the file to open it. If it contains boot.img, system folder & meta-inf folder... then this can be flashed, but not in that tar.gz format.
You need to extract it and make another zip archive. Put all those items into the zip archive and set the compression method as store.
Now, flash this zip file.
Pre - requisites for flashing any rom :
1. Wipe data/factory reset from recovery mode.
2. Wipe cache from recovery.
3. Wipe dalvik-cache from advanced option in recovery.
Click to expand...
Click to collapse
Sent from my HTC Explorer A310e using XDA Premium HD app
thanks
but it doesn't have those folders
I attached the photo of opened archive
I'll be appreciated if you take a look
This can be flashed using RUU (rom update utility) for your phone.
I am seraching for methods...
-----------------------
It is very complicated to flash tar.gz rom file.
For that reason, i found this flashable zip file... --> htc arabic stock 1.28.415.1
-----------------------
If you wish to take the trouble of flashing the tar.gz, then follow this thread (i can't guarantee you anything regarding this)
[HOWTO] HTC Explorer - Install RUU
Hello everyone,
Please Help !!
i have installed android version 4.0.4 on my GT-19103
the base band version is 19103DDLP3
kernel version is 3.1.10-1169726
i tried every way to root my device but completely failed
i installed CWMR 4.0.0.2 using odin
my problem starts from here when i put the .Zip file in internal or external SD card (not in a folder)
and when i choose select zip file from SD
its not there
any other file is there
but any .zip file is not there (can't find .zip or .apk)
even i cant upgrade CWMR because higher version is .zip which i cant find either when i choose select zip file from SD
i tried all instructions and googling for days
i tried one click root
but the only thing i didn't try is
can i root my device using odin and old rooting package for android version 2.3.4 gingerbread although i am running android version 4.0.4 now??
regards;
First welcome to Galaxy R forum ..
From next time please don't create new thread for each every small thing, I didn't get you have you flashed CWM using ODIN if yes just flash Ardatdat's kernel you can download it from Dev Section....
armada_2004 said:
Hello everyone,
Please Help !!
i have installed android version 4.0.4 on my GT-19103
the base band version is 19103DDLP3
kernel version is 3.1.10-1169726
i tried every way to root my device but completely failed
i installed CWMR 4.0.0.2 using odin
my problem starts from here when i put the .Zip file in internal or external SD card (not in a folder)
and when i choose select zip file from SD
its not there
any other file is there
but any .zip file is not there (can't find .zip or .apk)
even i cant upgrade CWMR because higher version is .zip which i cant find either when i choose select zip file from SD
i tried all instructions and googling for days
i tried one click root
but the only thing i didn't try is
can i root my device using odin and old rooting package for android version 2.3.4 gingerbread although i am running android version 4.0.4 now??
regards;
Click to expand...
Click to collapse
buddy, there is Q/A thread for the same. I think you must use it first. But if you have made it so here is the solution for rooting:
Q. 4) How Can I flash CMW & Root my Galaxy R.?
A. 4) This is something Critical. Just Joking. Its so easy. If you are over GB then flash Superuser zip file(attached) & if you are over ICS then just flash Ardatdat's Kernel V4 or higher. it will automatically Root your Galaxy R. Link for Ardatdat's kernels in dropbox: → Dropbox ←
Also, one can follow this tutorial for Rooting ICS - > {Guide} Rooting Galaxy R on version 4.0.4 & for flashing CMW please follow this tut -> [Guide] How to flash stock FW and CWW and Root i9103
Also there is Q/A thread for your all questions(most probably) here → http://forum.xda-developers.com/showthread.php?t=1983262
Edit: Great, MJ used Hammer first.
mj.vikram said:
First welcome to Galaxy R forum ..
From next time please don't create new thread for each every small thing, I didn't get you have you flashed CWM using ODIN if yes just flash Ardatdat's kernel you can download it from Dev Section....
Click to expand...
Click to collapse
WOW what a reply ! i like this part "each every small thing"
regardless it is a HUGE issue to me at least
you didn't understand the problem !
i can't flash any kernel because it is a ZIP file
CWR is not recognizing ZIP files
CWR can't see ZIP files
my problem with CWR and ZIP files
Hello, You can try one of these:
1. Try reflashing CWM v4.0.0.2 via ODIN and check if its recognizing the said zips.
2. Place the zips in a folder inside the internal sdcard and try.
The-Droidster said:
Hello, You can try one of these:
1. Try reflashing CWM v4.0.0.2 via ODIN and check if its recognizing the said zips.
2. Place the zips in a folder inside the internal sdcard and try.
Click to expand...
Click to collapse
thank you for your reply
i already tried that many times but still no luck
i wonder if i can use TWRP instead of CWR if i can flash TWRP using odin
armada_2004 said:
WOW what a reply ! i like this part "each every small thing"
regardless it is a HUGE issue to me at least
you didn't understand the problem !
i can't flash any kernel because it is a ZIP file
CWR is not recognizing ZIP files
CWR can't see ZIP files
my problem with CWR and ZIP files
Click to expand...
Click to collapse
CWR is not able to detect the zip file, which version of CWM you have flashed and how you have flashed it, Can you please explain in detail....
I was just trying to help you only buddy and i guess you took me wrong...
mj.vikram said:
CWR is not able to detect the zip file, which version of CWM you have flashed and how you have flashed it, Can you please explain in detail....
I was just trying to help you only buddy and i guess you took me wrong...
Click to expand...
Click to collapse
no problem bro, thank you for your reply
version of CWM is 4.0.0.2 .tar file and i flashed it using odin
armada_2004 said:
Hello everyone,
Please Help !!
i have installed android version 4.0.4 on my GT-19103
the base band version is 19103DDLP3
kernel version is 3.1.10-1169726
i tried every way to root my device but completely failed
i installed CWMR 4.0.0.2 using odin
my problem starts from here when i put the .Zip file in internal or external SD card (not in a folder)
and when i choose select zip file from SD
its not there
any other file is there
but any .zip file is not there (can't find .zip or .apk)
even i cant upgrade CWMR because higher version is .zip which i cant find either when i choose select zip file from SD
i tried all instructions and googling for days
i tried one click root
but the only thing i didn't try is
can i root my device using odin and old rooting package for android version 2.3.4 gingerbread although i am running android version 4.0.4 now??
regards;
Click to expand...
Click to collapse
Duplicate thread.
Check. here
Flash ardatdats kernel v4 or higher (download it from here) and youll be done.
And if CWM Recovery is not recognizing zip files..
Dont put it in a FOLDER like
/sdcard/xyz folder/abcd.zip
Put it like
sdcard/abcd.zip
i.e. Directly in the basic folder of sdcard..
NOT in any folder like bluetooth,clockworkmod,android,DCIM etc.
This might solve your issue mate
Sent from my GT-I9103 using xda premium
DeepankarS said:
Duplicate thread.
Check. here
Flash ardatdats kernel v4 or higher (download it from here) and youll be done.
And if CWM Recovery is not recognizing zip files..
Dont put it in a FOLDER like
/sdcard/xyz folder/abcd.zip
Put it like
sdcard/abcd.zip
i.e. Directly in the basic folder of sdcard..
NOT in any folder like bluetooth,clockworkmod,android,DCIM etc.
This might solve your issue mate
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
thanks for reply
if you read my post carefully
i put the zip file directly into sd card not inside any folder
problem still exist
armada_2004 said:
thanks for reply
if you read my post carefully
i put the zip file directly into sd card not inside any folder
problem still exist
Click to expand...
Click to collapse
UPDATE
finally problem solved
thanks to everybody replied
the solution was to rename the zip file to update.zip
and choose option from CWR install.zip not the option to choose zip from sd card
now it is rooted !
thank you all
armada_2004 said:
thanks for reply
if you read my post carefully
i put the zip file directly into sd card not inside any folder
Click to expand...
Click to collapse
What option do you chose while.chosing the zip in CWM?
---------- Post added at 05:15 AM ---------- Previous post was at 05:13 AM ----------
armada_2004 said:
UPDATE
finally problem solved
thanks to everybody replied
the solution was to rename the zip file to update.zip
and choose option from CWR install.zip not the option to choose zip from sd card
now it is rooted !
thank you all
Click to expand...
Click to collapse
Good..
Sent from my GT-I9103 using xda app-developers app
armada_2004 said:
UPDATE
finally problem solved
thanks to everybody replied
the solution was to rename the zip file to update.zip
and choose option from CWR install.zip not the option to choose zip from sd card
now it is rooted !
thank you all
Click to expand...
Click to collapse
Prefix [Solved] in subject..
I searched for a thread with a similar thread but i couldn't find one.
SO here is my problem.
I am using CWM 5 and it refuses to install CWM zips for some reason. It gives status error 0 installation failed. I have no idea how to fix this problem. Will be grateful for your help.
Aniket.t20 said:
I searched for a thread with a similar thread but i couldn't find one.
SO here is my problem.
I am using CWM 5 and it refuses to install CWM zips for some reason. It gives status error 0 installation failed. I have no idea how to fix this problem. Will be grateful for your help.
Click to expand...
Click to collapse
status 0 error comes due to bad binaries file. Just update binaries of that zip or give a shot from CWM 6.0.1.1.
kataria.vikesh said:
status 0 error comes due to bad binaries file. Just update binaries of that zip or give a shot from CWM 6.0.1.1.
Click to expand...
Click to collapse
I'm at a loss here. How do i update binaries and could u explain this to me in a bit of detail( what are binaries? - Sorry for the newbie questions but Im only trying to learn)
Aniket.t20 said:
I'm at a loss here. How do i update binaries and could u explain this to me in a bit of detail( what are binaries? - Sorry for the newbie questions but Im only trying to learn)
Click to expand...
Click to collapse
For updation of binaries->Just extract any CWM File of Galaxy R at your PC/mobile. It will show 2-3 folders. Go to Meta-info folder->In the end of Folders you will see 2 files. one is Update script & second is Update-binaries. These Wrong update binaries become problem of Status 0.
For flashing CWM 6.0.1.1-> Flash This file using CWM
Just click "Show Content" if you think you are Newbie.
kataria.vikesh said:
For updation of binaries->Just extract any CWM File of Galaxy R at your PC/mobile. It will show 2-3 folders. Go to Meta-info folder->In the end of Folders you will see 2 files. one is Update script & second is Update-binaries. These Wrong update binaries become problem of Status 0.
For flashing CWM 6.0.1.1-> Flash This file using CWM
Just click "Show Content" if you think you are Newbie.
Click to expand...
Click to collapse
So CWM 6.0.1.1 will flash the zips irrespective of their binaries? And should i choose to update the binaries, How do i do it?
Aniket.t20 said:
So CWM 6.0.1.1 will flash the zips irrespective of their binaries? And should i choose to update the binaries, How do i do it?
Click to expand...
Click to collapse
Hope you have CWM Flashed in your mobile, then Just Flash the file which is given by vikesh using CWM buddy everything will be fine....
mj.vikram said:
Hope you have CWM Flashed in your mobile, then Just Flash the file which is given by vikesh using CWM buddy everything will be fine....
Click to expand...
Click to collapse
kataria.vikesh said:
For updation of binaries->Just extract any CWM File of Galaxy R at your PC/mobile. It will show 2-3 folders. Go to Meta-info folder->In the end of Folders you will see 2 files. one is Update script & second is Update-binaries. These Wrong update binaries become problem of Status 0.
For flashing CWM 6.0.1.1-> Flash This file using CWM
Just click "Show Content" if you think you are Newbie.
Click to expand...
Click to collapse
Tried flashing via CWM 6.0.1.1 and it didnt work. Same status error 0
Aniket.t20 said:
Tried flashing via CWM 6.0.1.1 and it didnt work. Same status error 0
Click to expand...
Click to collapse
Buddy, I have given then CWM 6.0.1.1. extract the inside files. Just follow the above process ( Copy paste of Update-binary file).
MJ buddy, I think we must create the Status error thread with solution coz its so hard to make understand "HOW TO" for the same.
kataria.vikesh said:
Buddy, I have given then CWM 6.0.1.1. extract the inside files. Just follow the above process ( Copy paste of Update-binary file).
MJ buddy, I think we must create the Status error thread with solution coz its so hard to make understand "HOW TO" for the same.
Click to expand...
Click to collapse
Mj asked me to flash the CWM zip that u gave me so thats exactly what i did. I flashed the zip via CWM and then tried flashing the other zip files(which had failed earlier) and it didnt work. So to be clear - u want me to extract the zip u provided and replace the binaries in the zips(whose flashing failed) with the one from CWM 6.0.1.1 ? and then compress it into zip format (via winzip or winrar). Am i right ?
Aniket.t20 said:
Mj asked me to flash the CWM zip that u gave me so thats exactly what i did. I flashed the zip via CWM and then tried flashing the other zip files(which had failed earlier) and it didnt work. So to be clear - u want me to extract the zip u provided and replace the binaries in the zips(whose flashing failed) with the one from CWM 6.0.1.1 ? and then compress it into zip format (via winzip or winrar). Am i right ?
Click to expand...
Click to collapse
Aniket can you please confirm one thing are you using Stock Recovery or CWM recovery presently if you are not sure please post the Picks... Have you ever flashed CWM on your device in some thread i have see that you are using Stock ROM so i am asking this...
Aniket.t20 said:
Mj asked me to flash the CWM zip that u gave me so thats exactly what i did. I flashed the zip via CWM and then tried flashing the other zip files(which had failed earlier) and it didnt work. So to be clear - u want me to extract the zip u provided and replace the binaries in the zips(whose flashing failed) with the one from CWM 6.0.1.1 ? and then compress it into zip format (via winzip or winrar). Am i right ?
Click to expand...
Click to collapse
mj.vikram said:
Aniket can you please confirm one thing are you using Stock Recovery or CWM recovery presently if you are not sure please post the Picks... Have you ever flashed CWM on your device in some thread i have see that you are using Stock ROM so i am asking this...
Click to expand...
Click to collapse
Yes buddy, so instead of compressing it, just use Winrar. open both files (i.e. error one & CMW)-> Delete update binaries file from Error one-> extract File (update binaries) from CWM.-> Just Drag & drop using mouse the extracted file to Error Ziped file-> Just press ok whatever Winrar says(it will add it in the file)-> Flash that error file now & report.
@MJ, i think you have made a thread regarding CWM errors..??
mj.vikram said:
Aniket can you please confirm one thing are you using Stock Recovery or CWM recovery presently if you are not sure please post the Picks... Have you ever flashed CWM on your device in some thread i have see that you are using Stock ROM so i am asking this...
Click to expand...
Click to collapse
Stock ROM yes but i use CWM recovery for all practical purposes. As all zips are given in CWM flashable formats including ones as basic as Superuser.zip . Currently I am on X-perience ROM and im using CWM 6.0.1.1. before which i was using CWM 5.5.x
i can't flash ''vicksi rom for mt6577 ''''on huawei u8836d.it say that ''Replace boot.img and /system/lib/libfmjni.so from your Base rom 4.2.2, then make .zip again rom and instal via recovery''.where can i get these files?
sawlay said:
i can't flash ''vicksi rom for mt6577 ''''on huawei u8836d.it say that ''Replace boot.img and /system/lib/libfmjni.so from your Base rom 4.2.2, then make .zip again rom and instal via recovery''.where can i get these files?
Click to expand...
Click to collapse
You can get these files in the root of your phone in /system/lib/libfmjni.so . Use a root explorer and just copy these file.
As for the boot.img there are methods like these
1) simplest one is to make a backup of your rom and then use 7zip on pc to browse it and find the boot.img
2)use adb to extract it.( never tried this cause the first one always worked for me)
HIT THANX IF I HELPED:laugh: