Database Info

simple question. I9020A rooted running ICS rom. Do I accept OTA update?

Hi there,
Since my phone is a I9020A on Fido I rooted and currently running CM9 ICS rom, should I accept any OTA update or do I have to manually install it through CWM?

No, it can screw up your device if you do it like that. Just do it manually like everyone is doing.
Sent from my Nexus S using xda premium

HeavenlyWinds said:
No, it can screw up your device if you do it like that. Just do it manually like everyone is doing.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
for now what I did was downgrade to stock 2.3.6 in hopes teh OTA would be received
Can you tell me which package I should be flashing? I have yet to see the OTA for 4.0 for the I9020A

sspikey said:
for now what I did was downgrade to stock 2.3.6 in hopes teh OTA would be received
Can you tell me which package I should be flashing? I have yet to see the OTA for 4.0 for the I9020A
Click to expand...
Click to collapse
There is this rom
AndroidUser00110001 said:
ROM:
Android 4.0.3 IML74k
Bootloader Version : I9020XXKL1 - Works with all GSM devices. Please check HERE to see if it will work on your device.
Radio - No Radio. Your favorite radio will work with 4.0.3
Root - DO NOT UPDATE SUPERUSER. Wait for proper ICS version. The current version will not ask or show permission is granted for apps that require root.
Do not update superuser yet until a new version for ICS comes out.
All apps that can be downloaded from market have been removed. If you can not see your missing apps in Android Market then download attached zip files.
Building new ROM from source now. Will be all pure android but for status bar widgets and enhanced power menu.
Follow me on Twitter for more updates and when my AOSP ROM will be released.
There is a patch for new Systemui.APK file that will show H when you have HSPA signal. It is attached to this post and can be loaded from recovery.
Deodex Version
Download HERE
Odex Version
Download HERE
No Bootloader - These files do not contain the bootloader that came with ICS.
Odex Version
Download HERE
Deodex Version - thanks brenix!
Dowload HERE
Add On:
Depending on what country you are in, you may not see some of the missing apps in Android Market. Download the files below, extract the zip, place the apk files on SD Card and side load them if you favorite file browser or whatever.
Apps 1
Apps 2
Follow me on Twitter
If you would like to make a small donation for my work you may do so by clicking HERE
Click to expand...
Click to collapse

maxone001 said:
There is this rom
Click to expand...
Click to collapse
Run the Odex or Deodex version?
Where would I find the proper radio for Fido?
Sorry im a terrible noob!

sspikey said:
Run the Odex or Deodex version?
Where would I find the proper radio for Fido?
Sorry im a terrible noob!
Click to expand...
Click to collapse
Only difference between odex and deodex is that deodex is for theming. Odex boots faster.... And if the radio you're using right bow is working properly you don't need to flash another radio

JakeOcn said:
Only difference between odex and deodex is that deodex is for theming. Odex boots faster.... And if the radio you're using right bow is working properly you don't need to flash another radio
Click to expand...
Click to collapse
Ok so I flashed 2.3.6 back stock for OTA rom from the thread in this section and now for some odd reason I cant access my CWM. Whenever I try to it shows some box and triangle thing flashing
tried to reflash CWM using Rom Manager and kept getting an error.
Doh!

To the handful of people getting OTA update on i9020a, PLEASE PLEASE PLEASE get either:
a) name of ZIP file
b) URL of ZIP file
c) copy ZIP file and upload (should be in /cache folder I think)
(preferably all three)
Once you install it the file is deleted and you lost your chance, so please if you downloaded update don't apply until you get at least one of the above...but preferably all three, you would be a hero to all of us in this thread with i9020a wanting update. This is AT&T/Rogers model.

doubleblack said:
To the handful of people getting OTA update on i9020a, PLEASE PLEASE PLEASE get either:
a) name of ZIP file
b) URL of ZIP file
c) copy ZIP file and upload (should be in /cache folder I think)
(preferably all three)
Once you install it the file is deleted and you lost your chance, so please if you downloaded update don't apply until you get at least one of the above...but preferably all three, you would be a hero to all of us in this thread with i9020a wanting update. This is AT&T/Rogers model.
Click to expand...
Click to collapse
There´s people getting OTA on i9020A?
I bought my Nexus in Canada so it´s a i9020A

r4du said:
There´s people getting OTA on i9020A?
I bought my Nexus in Canada so it´s a i9020A
Click to expand...
Click to collapse
People are claiming to get it, including what I believe was the OP of this thread...so I guess so? All I know is I have i9020a and I'm starting to get pissed off not having ICS!

doubleblack said:
People are claiming to get it, including what I believe was the OP of this thread...so I guess so? All I know is I have i9020a and I'm starting to get pissed off not having ICS!
Click to expand...
Click to collapse
The OP states he is running CM9 Kangs... He isn't getting the update since he is not on stock -- I think he is just asking how to actually take the OTA when it comes.
I am on Fido too in Canada and I can assure you, I have not received the OTA for my I9020A yet... Once it is available for my I9020A, I will post all the information here (if the I9020A official OTA is not already posted, that is...)

if i flash back to stock with root will i still receive OTA on ns4g?? even if with a different kernal?
Sent from my Nexus S 4G using XDA Premium App

Eniac77 said:
The OP states he is running CM9 Kangs... He isn't getting the update since he is not on stock -- I think he is just asking how to actually take the OTA when it comes.
I am on Fido too in Canada and I can assure you, I have not received the OTA for my I9020A yet... Once it is available for my I9020A, I will post all the information here (if the I9020A official OTA is not already posted, that is...)
Click to expand...
Click to collapse
bingo I didnt receive the update
just wantred to be prepared
I have an issue though where I cant seem to access the CWM.
I think I am going to revert my phone to stock for now until everything gets sorted out!

neo_x22000 said:
if i flash back to stock with root will i still receive OTA on ns4g?? even if with a different kernal?
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
I think the kernel has to be stock as well.
I just downloaded OTARootKeeper app and have reverted completely back to stock; I am patiently waiting for the i9020A OTA.
Hopefully we get it soon.
I don't mind a little wait though... by then all the other bugs and such with SuperUser app will be figured out for ICS.

Eniac77 said:
I think the kernel has to be stock as well.
I just downloaded OTARootKeeper app and have reverted completely back to stock; I am patiently waiting for the i9020A OTA.
Hopefully we get it soon.
I don't mind a little wait though... by then all the other bugs and such with SuperUser app will be figured out for ICS.
Click to expand...
Click to collapse
how do use root keeper...do i download it from the market after update...like i would with titanium backup..
Sent from my Nexus S 4G using XDA Premium App

Eniac77 said:
I think the kernel has to be stock as well.
I just downloaded OTARootKeeper app and have reverted completely back to stock; I am patiently waiting for the i9020A OTA.
Hopefully we get it soon.
I don't mind a little wait though... by then all the other bugs and such with SuperUser app will be figured out for ICS.
Click to expand...
Click to collapse
is that really all I have to do?
I installed 2.3.6 back (from the thread with all the stock OTA updates) and need to unroot using the app you mentionned and update via OTA? thats it?

sspikey said:
is that really all I have to do?
I installed 2.3.6 back (from the thread with all the stock OTA updates) and need to unroot using the app you mentionned and update via OTA? thats it?
Click to expand...
Click to collapse
I downloaded Voodoo OTARootKeeper from the android market. The description of the program claims it should hide your root during the ota and according to the apps latest reviews, it works on this ics upgrade. I am keeping my fingers crossed that it works and hopefully the super user app from the market will be updated by then to handle ics.

Eniac77 said:
I downloaded Voodoo OTARootKeeper from the android market. The description of the program claims it should hide your root during the ota and according to the apps latest reviews, it works on this ics upgrade. I am keeping my fingers crossed that it works and hopefully the super user app from the market will be updated by then to handle ics.
Click to expand...
Click to collapse
Also, Superuser has been officially updated for ICS, so you don't really need to use OTARootKeeper. The new SU works just like before.
http://androidsu.com/superuser/
Also, it looks like I hit "Thanks" instead of "Reply" at first, so.... free "Thanks" for you

I've been through the threads and nothing on Android 4.0.3 OTA for the I9020A as yet. My guess is when it shows up it will be posted in the master thread below
ALL Nexus S OTA Updates for ALL Variants, Plus Full ROM Packages
http://forum.xda-developers.com/showthread.php?t=1063664
Btw I'm on Telus and nothing as yet.

Nexus S M200 can't update JellyBean?

i have Nexus S korean version (M200). Now, running ics 4.0.4(stock rom), and i try to check update Jeanbean. But i get " the system i currently up to date" . Cann't M200 update JB?? who can help me about this?? :crying:

I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk

ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
thank u very much.. hix, i think stock rom than better. but long time wait for update... i will update cook rom

JB on K200
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted

zeehere said:
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
Click to expand...
Click to collapse
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2

Articudos said:
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
Could you please help me with some links for downloading the custom ROM for M200

zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?

zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
ghanchi2000 said:
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
Click to expand...
Click to collapse
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2

Articudos said:
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]

zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
Link: 404 page not found.:/
Radio compatitability depends on where u live.
If you experienced problem, look for this thread
http://forum.xda-developers.com/showthread.php?t=1116884
And flash krkc1 again.
If it's not compatitable, it can cause sudden signal drops and low mobile data speed.(afaik)
Sent from my Nexus S using Tapatalk 2

Thanks for the information. So far its been good. Will keep a watch.
Sent from my Nexus S using xda app-developers app

Correct the link
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
The link is wrong.Please post the correct link please.I have been using ics on m200 so far.Its good.I would like to know if you've experienced
any issues on JB?

This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app

Confirmation
zeehere said:
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I am from Kolkata,India.Using m200 korean model.Have the same problem as the threadstarter.I guess when you're using it smoothly then inshallah,i too would.
Just to be pretty sure,you're telling me to follow ONLY this:
First up, let me tell you that doing this is not necessay to get the OTA or having a smooth JB experience. The JB OTA installs without a wipe which means the data is preserved.
UPDATE: Google has put up the full image for 4.1.1 [i9023, i9020a and i9020t] . Now you do not need to clean flash ICS and then JB. Follow the part 1 of the guide below and flash the JB image instead of ICS. Nothing more to it.
Thanks anshumandash for pointing it out
That being said, I wanted to have the real stock image on my Nexus S and then Upgrade to JellyBean. Below are the steps that I took.
Go to this GoogleAndroidImages page and download the appropriate image for your phone & download. Since mine is an international version a.k.a I9023, I chose that ROM.
The download will be a tar.gz file. Use a utility like 7Zip to uncompress it. The tar.gz will have a .tar file inside and the /tar file will have a folder. Extract the folder to your PC. For my download, the folder was named soju-imm76d
Next Steps will wipe your phone, completely
Reboot your phone into bootloader mode.
Open a command prompt, navigate to the folder in step 2.
Enter the below commands, the image file names are for my download, modify it to the file names in your folder before running (I assume that you have fastboot working)
fastboot flash bootloader bootloader-crespo-i9020xxkl1.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
fastboot -w update image-soju-imm76d.zip
Click to expand...
Click to collapse
RIGHT?Meaning just the above process?
---------- Post added at 06:52 PM ---------- Previous post was at 06:47 PM ----------
also,this means it'll wipe all my data/apps/settings ? ?

Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app

zeehere said:
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
You dere?.i downloaded m200 again and installed it.Which one did you download?
soju ,sojua, or sojuk?
i guess i was supposed to download soju

Yes you should have downloaded soju. Sojuk is the same Korean one.
Sent from my Nexus S using xda app-developers app

Need help to return ICS Leak from SCV7

First of all, sorry for my poor english .
I just flash ICS Leak for my A2 for a few days, and i just upgrade it to SCV7.
Now i just need to come back to ICS Leak. But dont know how to do that.
So, can u show me the way to do that

Do you have a backup?
Sent from my locked MB865 on Ice Cream Sandwich.

i've tried to restored several time, but its not work

When i tried to restore, it said: MD5 Mismatch. what should i do

ZzMikezZ said:
First of all, sorry for my poor english .
I just flash ICS Leak for my A2 for a few days, and i just upgrade it to SCV7.
Now i just need to come back to ICS Leak. But dont know how to do that.
So, can u show me the way to do that
Click to expand...
Click to collapse
its a long process(might be a shorter way but i dont know any other way)downgrade to at&t 2.3.5 using jim's script and then using rsd lite flash searat asian retail 2.3.6 and then upgrade to ics
hit thanks if its helpful

Did the backup you are trying to restore get moved or renamed on your sd card?
That will cause a MD5 mismatch error

shaurya19 said:
using rsd lite flash searat asian retail 2.3.6 and then upgrade to ics
Click to expand...
Click to collapse
we dont know if he is having ATT hardware or other hardware
so if you are on ATT hardware then only go with JIM's script "FXZ back to 2.3.5" here
if dont have ATT hardware ..... dont flash above fxz else you will HARD BRICK
one more thing ...... FOLLOW THE RULES xactly as in jims script .....
all the best :fingers-crossed:

[Q] help me about Custom GB to ICS!!!

Hi guys.
Now I am using a GB custom rom called 'Lithium v1.3 (2.3.6)' .
I have a question. If I want to install ICS leak what steps should I take?
Can I go directly stock recovery mode and then Install from a zip file? or
should I do FXZ and then do OTA 2.3.6 to install ICS leak?
Plz give me little help Thanks

Take a look at the link below. It may not have all the answers, but it's something to get you started.
http://forum.xda-developers.com/showthread.php?t=1902675

bryan0phone said:
Hi guys.
Now I am using a GB custom rom called 'Lithium v1.3 (2.3.6)' .
I have a question. If I want to install ICS leak what steps should I take?
Can I go directly stock recovery mode and then Install from a zip file? or
should I do FXZ and then do OTA 2.3.6 to install ICS leak?
Plz give me little help Thanks
Click to expand...
Click to collapse
I don't believe you can go to ICS with out FXZ back to 2.3.5. Read the below thread to get started. Its for AT&T Version, if you use different version phone make sure you FXZ back the correct Image to get started.
http://forum.xda-developers.com/showthread.php?t=1779968

bryan0phone said:
Hi guys.
Now I am using a GB custom rom called 'Lithium v1.3 (2.3.6)' .
I have a question. If I want to install ICS leak what steps should I take?
Can I go directly stock recovery mode and then Install from a zip file? or
should I do FXZ and then do OTA 2.3.6 to install ICS leak?
Plz give me little help Thanks
Click to expand...
Click to collapse
Yes, the easiest thing would be to fxz back to stock first, then install ICS.
For AT&T only:
alteredlikeness said:
http://sbf.droid-developers.org/edison/list.php
The very bottom one (InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip) is the AT&T 2.3.6 fxz.
The 2nd from the bottom (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip) is the AT&T 2.3.5 fxz (you would need to use the 2.3.6 "replace" files from the beginner's thread with this one)
Click to expand...
Click to collapse
Sent from my phone's mind

[Q] ICS Update Fail Error?

The ICS update isn't installing on my Atrix 2. The download process will finish and the installation will start, but it stops just a little into it and the phone will restart saying that the software update failed. I purchased the phone used and it was already rooted when I bought it. Will that keep the update from installing? How can I unroot or flash back? I'm new to all this, so I'm not entirely sure what to do and I don't want to try anything without knowing anything for sure. I don't want to mess up my phone. Any help would be appreciated. Thanks

Ok, I'm assuming you bought it used? And if so, why firmware are you on?
Sent from my SAMSUNG-SGH-I727 using xda premium

Ics update fail on at&t atrix 2
Hi.
same problem i have exist when update ATRIX 2 via OTA.
I have AT&T cell.
Ginger bread 2.3.6
System version: 55.13.25.MB865.ATT.en.us
Base band veesion: 2011-11-16 23:52 off Bld
LUD_EDISION_R1D7_PATCH_36_111116_2336
Kernel veraion version: 2.5.35.7-g98a0a06
[email protected] #1
All system info is above kindly help in this regard. I live in Asia. Pakistan
Regards
M. Yousuf

Have the same problem. Have rooted Atrix 2 on 2.3.6, official update is downloaded, but after "install" it just boots back to 2.3.6, and in About device section it says "Update failed."
General question now, how to officially update rooted phone?

Well all of you have modified or removed some of the stock system apps.of you are rooted go into cache/recovery and see the last_log it will give you the reason why the update is failing.
If you are not rooted just fxz back to stock and then try.
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...

http://forum.xda-developers.com/showthread.php?t=1930474
Do a Lil bit of searching before posting!
Sent from my MB865 using xda premium

Thanks manish
Also thanks ashwasah for providing link.
Dears i like to tell u guys i am absolutely new with Android this is my first android phone.
I have experience of updating windows phone, i had HTC touchpro 2 and HTC hd2 several time i update custom rom on it. And off course all this i learn via xda and helpful memberz like you guys.
So therefore kindly guide me as new student. I have few questions
1. How i get into cache /recovery to see last log coz i did see any option in cell to find log.
2. If i am able to get stock 2.3.5, can phone starts normally and can i use it because this is at&t phone and i am using in in pakistan with other gsm carrier.
3. Can cell update via OTA to 2.3.6 and ICS after stock.
4. Kindly mention link how to downgrade to stock, i mean procedure.
any other thing which is helpful in this regard.
Thanking you.

rao_yousuf said:
Thanks manish
Also thanks ashwasah for providing link.
Dears i like to tell u guys i am absolutely new with Android this is my first android phone.
I have experience of updating windows phone, i had HTC touchpro 2 and HTC hd2 several time i update custom rom on it. And off course all this i learn via xda and helpful memberz like you guys.
So therefore kindly guide me as new student. I have few questions
1. How i get into cache /recovery to see last log coz i did see any option in cell to find log.
2. If i am able to get stock 2.3.5, can phone starts normally and can i use it because this is at&t phone and i am using in in pakistan with other gsm carrier.
3. Can cell update via OTA to 2.3.6 and ICS after stock.
4. Kindly mention link how to downgrade to stock, i mean procedure.
any other thing which is helpful in this regard.
Thanking you.
Click to expand...
Click to collapse
Well first of all you need to be rooted to see the cache folder.if you are rooted download root explorer or es file explorer.using that you can go into cache folder and see the last_log
Anyways if you wanna return to stock use the procedure from here and you'll be good to go http://forum.xda-developers.com/showthread.php?p=29560267
And yes if you fxz back to 2.3.5 you can OTA to 2.3.6 and then to ICS but in the link above now you can directly goto 2.3.6 just read the post and follow the instructions carefully
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...

Thanks @deveshmanish!
That got me back on course and updates.
Now if I can just find correct info to re-root after the at&t update to ice cream 4.

justanumber said:
Thanks @deveshmanish!
That got me back on course and updates.
Now if I can just find correct info to re-root after the at&t update to ice cream 4.
Click to expand...
Click to collapse
See here for ICS Root: http://forum.xda-developers.com/showthread.php?t=1779968
Sent from my phone's mind

Thanks @alteredlikeness
I did see that one (along with the many others, lol) but moved on after seeing "2.3.6". Will go back and read thread more closely.
Thanks again.
alteredlikeness said:
See here for ICS Root: http://forum.xda-developers.com/showthread.php?t=1779968
Sent from my phone's mind
Click to expand...
Click to collapse