Hi,
I got OTA of ICS and I am not liking it at all. I need to go back to Ginger Bread. Please help me find SBF of GB for India.
Thanks.
Unless I'm wrong.... You can't go back to GB from ICS, didn't you read the warning?
JDogg1329 said:
Unless I'm wrong.... You can't go back to GB from ICS, didn't you read the warning?
Click to expand...
Click to collapse
Hi,
Hmm, why its not possible ? I saw a thread here somewhere in which op has done the same but its related to AT&T only. Where as I am in India. If i get GB SBF, can't I just reflash it uisng RSD Lite to go back to GB ?
Thanks.
kikloo said:
Hi,
Hmm, why its not possible ? I saw a thread here somewhere in which op has done the same but its related to AT&T only. Where as I am in India. If i get GB SBF, can't I just reflash it uisng RSD Lite to go back to GB ?
Thanks.
Click to expand...
Click to collapse
DONT THINK OF FLASHING BACK TO GB you might possibly end with thick paper weight (HARD BRICK)
wait for few days .... our Awesome Devs are working on it. when they have solution, they'll let us know.... just buckle up
This sucks really, the phone is so un-responsive and I can hardly do anything on the phone as almost everything is crashing . Help! Help!!!
kikloo said:
This sucks really, the phone is so un-responsive and I can hardly do anything on the phone as almost everything is crashing . Help! Help!!!
Click to expand...
Click to collapse
What all is crashing ?
Try to Factory Reset...This will work for sure...
Abn is right. try a factory reset. All you can do at this point. You CANNOT go back to gingerbread. You will brick.
For Pete's sake. This is exactly why we have been telling everyone to stay on the leak. Sheesh.
Sent from my SAMSUNG-SGH-I727 using xda premium
Not only a factory reset, but a hard reset. That will definitely solve ur prblm. I had sm issue to as i frgt to do it after the update. :banghead:
Motorola Atrix 2 (MB865 asia retail on ICS, unrooted)
Related
Hi,
Can any one tell me the AT&T Motorola Atrix 2 can be upgraded to the official 2.3.6 ( XWKL1 )? I just got this phone for my wife and it comes with 2.3.5 and I don't think AT&T will release 2.3.6 any time soon plus I bought the phone from my friend after he claimed the insurance ( he lost his previous A2 ) I don't have no data plan so I won't be able to get the firmware update through AT&T.
I upgraded my Samsung GS 2 ( International version ) to XWKL1 so can I upgrade my wife's A2 with the same FW through Odin then?
I will be really appreciated if some one can help me to answer this?
Might wanna wait a little because it may be updating sooner than later, hopefully. I have the Atrix 4G and just got the SOAK notice. Gonna flash fruitcake and see what they send out...
You guys might want to read where you're posting this.
This is the Atrix 4G forum, not the Atrix 2 forum. Moderators please move.
tehrules said:
You guys might want to read where you're posting this.
This is the Atrix 4G forum, not the Atrix 2 forum. Moderators please move.
Click to expand...
Click to collapse
You can't just say "mods please move" unless you reported the post/thread using the exclamation point button.
Don't bother doing it, I already did.
Samkee007 said:
I upgraded my Samsung GS 2 ( International version ) to XWKL1 so can I upgrade my wife's A2 with the same FW through Odin then?
I will be really appreciated if some one can help me to answer this?
Click to expand...
Click to collapse
Ummmm...no. at best, Odin won't recognize the A2 BC Odin is meant for Sammy devices. At worst, if it does recognize your phone and you flash the SGS2 firmware to the A2, you will most likely end up with an unusable brick.
K thx bai
Sent from my MB860 using xda premium
Atrix 2 will probably be getting 2.3.7 pretty soon. Stay tuned.
By the way the atrix 2 gets OTA updates, not usually from a file that you flash to the phone. You will usually get a notice on your phone that an update is available for download, and ask you what to do, all wireless.
d3athsd00r said:
Ummmm...no. at best, Odin won't recognize the A2 BC Odin is meant for Sammy devices. At worst, if it does recognize your phone and you flash the SGS2 firmware to the A2, you will most likely end up with an unusable brick.
K thx bai
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
extide said:
Atrix 2 will probably be getting 2.3.7 pretty soon. Stay tuned.
Click to expand...
Click to collapse
jimbridgman said:
By the way the atrix 2 gets OTA updates, not usually from a file that you flash to the phone. You will usually get a notice on your phone that an update is available for download, and ask you what to do, all wireless.
Click to expand...
Click to collapse
Thanks all 3 of you. I don't think I can get any updates OTA simply because I don't have data plan secondly, I bought the phone from my friend not directly from AT&T. So I just wait & see then.
Thanks again
Samkee007 said:
Thanks all 3 of you. I don't think I can get any updates OTA simply because I don't have data plan secondly, I bought the phone from my friend not directly from AT&T. So I just wait & see then.
Thanks again
Click to expand...
Click to collapse
You can get the OTA updates from wifi too... no data plan needed.
Daywalker4 fxz 2.3.5 is not opening in dropbox as it says file corrupt ..what to doo
Arjindia said:
Daywalker4 fxz 2.3.5 is not opening in dropbox as it says file corrupt ..what to doo
Click to expand...
Click to collapse
Go to the beginners thread there is an alternative download there.
2.3.6
Hey guys,
Motorola and at&t released the 2.3.6 upgrade for teh Atrix 2 today (February 2nd 2012). Just go to settings > about phone> software updates for an OTA upgrade... u need wiFi connection though (its 58 Mb)
hopefully we also get ICS whenever it comes out!!! Maybe MOtorola hasn't forgotten the A2!!1
it keeps telling me checking for available update please wait forever
Note :- i unlocked my mobile (sim unlock ) and using it outside of the USA with a Vodafone Sim .
Maybe that's the reason?
I am testing it over wifi not data
Root
Will updating remove root access?
Yes, if you don't take steps to preserve it. Do a search or check the DEV forum for the details.
SeekerLoki said:
Yes, if you don't take steps to preserve it. Do a search or check the DEV forum for the details.
Click to expand...
Click to collapse
More specifically: http://forum.xda-developers.com/showthread.php?t=1477656
I would love to get this update.. but it won't let me cause it says I don't have a motoblur account set up. So I set one up. Entered in the new credentials.. says I have entered in the wrong info.. and it deleted my exchange email and hotmail account. Fabulous.. so I can't log in. It won't let me. I've been trying for over a week now. Ideas?
holeshot77 said:
I would love to get this update.. but it won't let me cause it says I don't have a motoblur account set up. So I set one up. Entered in the new credentials.. says I have entered in the wrong info.. and it deleted my exchange email and hotmail account. Fabulous.. so I can't log in. It won't let me. I've been trying for over a week now. Ideas?
Click to expand...
Click to collapse
Flash the FXZ and revert back to stock, probably the easiest way to get it.
holeshot77 said:
I would love to get this update.. but it won't let me cause it says I don't have a motoblur account set up. So I set one up. Entered in the new credentials.. says I have entered in the wrong info.. and it deleted my exchange email and hotmail account. Fabulous.. so I can't log in. It won't let me. I've been trying for over a week now. Ideas?
Click to expand...
Click to collapse
What ROM are you currently running? I would recommend flashing the 2.3.5 fkz's rerooting, and then using forever root. Then try using the OTA update. Or you could wait until lfaber06 incorporates this into his SC ROM which will make things a LOT easier.
I am on supercharged v4. I will do that and see hat happens.
Sent from my MB865 using xda premium
First of all, sorry for my poor english .
I just flash ICS Leak for my A2 for a few days, and i just upgrade it to SCV7.
Now i just need to come back to ICS Leak. But dont know how to do that.
So, can u show me the way to do that
Do you have a backup?
Sent from my locked MB865 on Ice Cream Sandwich.
i've tried to restored several time, but its not work
When i tried to restore, it said: MD5 Mismatch. what should i do
ZzMikezZ said:
First of all, sorry for my poor english .
I just flash ICS Leak for my A2 for a few days, and i just upgrade it to SCV7.
Now i just need to come back to ICS Leak. But dont know how to do that.
So, can u show me the way to do that
Click to expand...
Click to collapse
its a long process(might be a shorter way but i dont know any other way)downgrade to at&t 2.3.5 using jim's script and then using rsd lite flash searat asian retail 2.3.6 and then upgrade to ics
hit thanks if its helpful
Did the backup you are trying to restore get moved or renamed on your sd card?
That will cause a MD5 mismatch error
shaurya19 said:
using rsd lite flash searat asian retail 2.3.6 and then upgrade to ics
Click to expand...
Click to collapse
we dont know if he is having ATT hardware or other hardware
so if you are on ATT hardware then only go with JIM's script "FXZ back to 2.3.5" here
if dont have ATT hardware ..... dont flash above fxz else you will HARD BRICK
one more thing ...... FOLLOW THE RULES xactly as in jims script .....
all the best :fingers-crossed:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Questions belong in the Q&A Section.
The signature verification failed because SCV7 is based on our ICS leak. Which is TOTALLY different than the OTA update you recieved. There are currently no ROMs available for the firmware you are on.
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
farshad525hou said:
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
Click to expand...
Click to collapse
Lol farshad, you're so right. I didn't even read that part of his post.
Fall the Moron.... Lol.
Sent from my SAMSUNG-SGH-I727 using xda premium
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
willyyumm27 said:
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
Click to expand...
Click to collapse
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
thordroid said:
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
Click to expand...
Click to collapse
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Apex_Strider said:
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Click to expand...
Click to collapse
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
is there no way out?
devilhunter47 said:
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
can i FXZ this to 2.3.5? would that be of help?
thordroid said:
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
Click to expand...
Click to collapse
Dont ever try to fxz from ota ics to gb..you'll hard brick
Sent from my MB865 using xda app-developers app
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Atrix 2 brick
I've bricked my atrix 2 and reinstalled the original rom with an application from Motorola that let me force the original back on my device. But I did not have ics. So I'll look up the application and the original rom. Later tonight or tomorrow.
You can FXZ from ICS to GB
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
thordroid said:
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
Click to expand...
Click to collapse
no dont cross flash..you'll end up with a hard brick
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks a lot mate!
It is due to recommendation of you guys that I'm still on GB, which is quite snappier than ICS. :good:
I am going to stick with GB too,no more flashing until a stable CM 10 is out
Sent from my MB865 using xda app-developers app
ICS giving "Invalid CG Version" - is this different than the 2.3.6 problems?
I've searched forums and keep finding this issue for people on Android 2.3.6
Super short version:
Bought Motorola Atrix 2 Used. It was stock everything when I got it; guy only had it a couple months. I did not root it or install CWM. Kept it stock. Updated to 2.3.6 without any problems. Ran that for awhile. Eventually switched to a new phone (Galaxy Nexus) but kept Atrix 2 around as a backup. To be safe I did a Factory Reset on 2.3.6. Phone wiped, SD card Wiped, everything booted up as normal.
Now: ICS comes out couple months ago. I updated Atrix 2 by OTA to ICS 4.0.4. Thought cool; don't really need this anymore so let's sell it. Well after testing everything to make sure I didn't sell a lemon I decided to do a Factory reset just to make sure it was clean when I sold it.
After the phone shuts down it reboots with the black screen:
"AP Fastboot Mode (S) (Boot Failure)"
and then at the bottom
"Invalid CG Version (CG: Recovery)
I see all the threads for this problem with phones in 2.3.6 but I also see the threads saying once you're on ICS you can't FXZ back to 2.3.5 so I'm hesitant to follow those threads.
Anyone got clarity for me? If at all possible I would like to get this phone to a point where Factory Resets work AND future OTA Updates will work so I don't screw over the next owner.
Thanks - SF
*Attached screen shot just in case it helps.
US or international version?
Also questions go in Q&A..
Edit: May not be on later, so here..
Fastboot files for US AT&T official ICS
http://forum.xda-developers.com/showthread.php?p=33402190
Sent from my MB865 using xda premium
Axis_Drummer said:
US or international version?
Also questions go in Q&A..
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
US on AT&T.
Dang, did not meant to put in general. Moderators please move to Q&A if I don't figure out how to do it before so.
sola fide said:
US on AT&T.
Dang, did not meant to put in general. Moderators please move to Q&A if I don't figure out how to do it before so.
Click to expand...
Click to collapse
I gave you the link to the fastboot files in the above post
Sent from my MB865 using xda premium
Hello All,
I AM REALLY SORRY IF THIS QUESTION HAS BEEN ASKED MANY A TIMES.
I am from India and running the OTA android 4.0.4 on my Motorola Atrix 2. The version is a headache and spoils the fun of using Atrix 2. I was very much happy with speed that 2.3.6 gave me. But one unlucky day I got the 4.0.4 update and never has it been the same then. I am frustrated to the point of selling off my device.
So i would like to ask anyone who can help me out. Is there anyway I can go to the Stock Motorola Atrix 2 android version 2.3.6 or is there any other 4.0.4 cooked ROM that works better than the OTA 4.0.4? and if there is, can it be installed on my device? I have not yet rooted my device.
P.S. if there is anyway to go back to Stock 2.3.6, nothing could be better than that.
Any help regarding this will be really appreciated.
suket123 said:
Hello All,
I AM REALLY SORRY IF THIS QUESTION HAS BEEN ASKED MANY A TIMES.
I am from India and running the OTA android 4.0.4 on my Motorola Atrix 2. The version is a headache and spoils the fun of using Atrix 2. I was very much happy with speed that 2.3.6 gave me. But one unlucky day I got the 4.0.4 update and never has it been the same then. I am frustrated to the point of selling off my device.
So i would like to ask anyone who can help me out. Is there anyway I can go to the Stock Motorola Atrix 2 android version 2.3.6 or is there any other 4.0.4 cooked ROM that works better than the OTA 4.0.4? and if there is, can it be installed on my device? I have not yet rooted my device.
P.S. if there is anyway to go back to Stock 2.3.6, nothing could be better than that.
Any help regarding this will be really appreciated.
Click to expand...
Click to collapse
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
deveshmanish said:
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
The problems I am facing is a lot of lag when flicking through screens, slow downs, non-responsive apps, basically ICS is creating too much stress on the hardware of the phone. I like my phone to run smooth and lag free, so pls suggest me if there are any ROM's that can solve my issues, and if i can upgrade to those ROM's on my OTA ICS 4.0.4... Thanks DeveshMainsh
suket123 said:
The problems I am facing is a lot of lag when flicking through screens, slow downs, non-responsive apps, basically ICS is creating too much stress on the hardware of the phone. I like my phone to run smooth and lag free, so pls suggest me if there are any ROM's that can solve my issues, and if i can upgrade to those ROM's on my OTA ICS 4.0.4... Thanks DeveshMainsh
Click to expand...
Click to collapse
Do a data/ factory reset... ics runs nice and smooth sounds like ur phone needs an old fashioned cleaning out..
Sent from my MB865 using xda app-developers app
I have the same problem with my AT&T Motorola Atrix2. I upgraded it OTA 4 days ago and it is VERY FRUSTRATING!! Its super laggy with lot of lag between flicks, apps open slower and the worst part - once my dialer simply would not place a call on pressing the call button!! What use is a phone that refuses to call??
@Opener did u try factory resetting your phone? Did it help?
@Others, please suggest what I should do. I am a newbie too to android modding so I am not familiar with the currently trending mods/tweaks/cooked roms. Any way to downgrade to 2.3.6? If not, is there any custom firmware that gives better performance?
MenTaLLyMenTaL said:
I have the same problem with my AT&T Motorola Atrix2. I upgraded it OTA 4 days ago and it is VERY FRUSTRATING!! Its super laggy with lot of lag between flicks, apps open slower and the worst part - once my dialer simply would not place a call on pressing the call button!! What use is a phone that refuses to call??
@Opener did u try factory resetting your phone? Did it help?
@Others, please suggest what I should do. I am a newbie too to android modding so I am not familiar with the currently trending mods/tweaks/cooked roms. Any way to downgrade to 2.3.6? If not, is there any custom firmware that gives better performance?
Click to expand...
Click to collapse
First thing to do after update is factory reset..if still your phone is slow apply the awesome v6 supercharger script..my phone is super fast..
Sent from my MB865 using xda app-developers app
There is definitely something wrong with the OTA ICS update. I did many factory resets after the update and performance was unbearable. It seemed to work fine for a little while after the reset, but as soon as I signed into my google account it started giving me fits. I even reset, then created a new google account and it was the same thing. So I reset again and never signed into my account, seemed to work okay for a couple of days, but eventually it was the same performance issues.
I took my phone into the AT&T service center and they knew of the "issue". AT&T ended up replacing the phone under warranty and now I'm back to Gingerbread, kind of wishing I had a stable version of ICS because I really like it.
dmroeder said:
There is definitely something wrong with the OTA ICS update. I did many factory resets after the update and performance was unbearable. It seemed to work fine for a little while after the reset, but as soon as I signed into my google account it started giving me fits. I even reset, then created a new google account and it was the same thing. So I reset again and never signed into my account, seemed to work okay for a couple of days, but eventually it was the same performance issues.
I took my phone into the AT&T service center and they knew of the "issue". AT&T ended up replacing the phone under warranty and now I'm back to Gingerbread, kind of wishing I had a stable version of ICS because I really like it.
Click to expand...
Click to collapse
Could always get on ICS leak #1. If you not satisfied, can always go back to GB. From ICS leak #1 ONLY. Leak #2 and OTA CANNOT get back to GB. You'll only end up with a brick.
Sent from my MB865 using xda premium
A2Trip said:
Could always get on ICS leak #1. If you not satisfied, can always go back to GB. From ICS leak #1 ONLY. Leak #2 and OTA CANNOT get back to GB. You'll only end up with a brick.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
can we go back to gb via custom roms.. actually i am new to atrix2.. i dont know much about recovery roms and stuffs on atrix 2, as far as i know atrix2 is of little problems and low dev support.. i am on ics ota..
farz2farz said:
can we go back to gb via custom roms.. actually i am new to atrix2.. i dont know much about recovery roms and stuffs on atrix 2, as far as i know atrix2 is of little problems and low dev support.. i am on ics ota..
Click to expand...
Click to collapse
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
That's awesome news !! So now we have two confirmed cases of successful fxz from OTA 4.0.4 to GB for AsiaRetail version of our phone.
Sent from my MB865 on rooted ICS leak
anikadam said:
That's awesome news !! So now we have two confirmed cases of successful fxz from OTA 4.0.4 to GB for AsiaRetail version of our phone.
Sent from my MB865 on rooted ICS leak
Click to expand...
Click to collapse
Oh and btw i had flashed the china retail ics fxz while i was on searet ics leak and then back to searet 2.3.6 while i tried out miui on my phone..also fxzd directly from china retail ics to searet ics
Sent from my MB865 using xda app-developers app
devilhunter47 said:
Oh and btw i had flashed the china retail ics fxz while i was on searet ics leak and then back to searet 2.3.6 while i tried out miui on my phone..also fxzd directly from china retail ics to searet ics
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
That is some good news, might get the OTA after all
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
man.. how u do that. As fars i know, everyone ended bricking. i am from india. please help me.
farz2farz said:
man.. how u do that. As fars i know, everyone ended bricking. i am from india. please help me.
Click to expand...
Click to collapse
No big deal..just grab the fxz and flash via rsdlite..that is if your phone isnt at n t
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
man how u do it. as far as i know every one ended bricking please help me..
---------- Post added at 01:43 PM ---------- Previous post was at 01:36 PM ----------
devilhunter47 said:
No big deal..just grab the fxz and flash via rsdlite..that is if your phone isnt at n t
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
i dont understand. are you from kerala. am also. please help me. my phone is ics ota
farz2farz said:
man how u do it. as far as i know every one ended bricking please help me..
---------- Post added at 01:43 PM ---------- Previous post was at 01:36 PM ----------
i dont understand. are you from kerala. am also. please help me. my phone is ics ota
Click to expand...
Click to collapse
Read the beginner's guide under general section..just drop a pm when you are done..oru malayaliye kandathil santhosham
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
devilhunter47 said:
Read the beginner's guide under general section..just drop a pm when you are done..oru malayaliye kandathil santhosham
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
wow thats great.. sounds great. I am from thrissur. mm.. i think its better u give me ur phone number. so i can call u and clear my doubts. if you dont mind ( i am stuck on motorola atrix 2. damn i used lot of android phones before including atrix 4g, htc sensation, sgs2, lg 2x etc.. rooting and flashing, never been a problem for me, even installed android on a n9. but this one, a2 is a real pain. haa i,m stucked please help me ]
farz2farz said:
wow thats great.. sounds great. I am from thrissur. mm.. i think its better u give me ur phone number. so i can call u and clear my doubts. if you dont mind ( i am stuck on motorola atrix 2. damn i used lot of android phones before including atrix 4g, htc sensation, sgs2, lg 2x etc.. rooting and flashing, never been a problem for me, even installed android on a n9. but this one, a2 is a real pain. haa i,m stucked please help me ]
Click to expand...
Click to collapse
why no reply pleaaaaase help me.. now i rooted my ics ota installed bootmenu
flashed cm10, now i am on cm10 bootloop, my bootmenu gone, what i do. please help. i installed cm10 to second system. please help.
which version to flash via rsd. some one please reply..
att atrix2 downgrade
deveshmanish said:
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Can you help me pls to downgrade my phone from 4.04 to gb?
My phone is no longer functioning the way it was ever since it was accidentally upgraded to ICS.
It's an AT&T motorola arix2 mb865.
Thanks in advance for your assistance.