Hi, where can i download a standard 2.1 rom to my computer please? I need it as I have bricked my galaxy s so need to reflash using odin.
Please help. Thanks
http://www.samfirmware.com/
Hi, thanks for your reply, but when I go to that website what do i download? Please see another thread i wrote earlier below.
Hi all, please can anybody help, I have bricked my galaxy s uk version so it only comes on to where the big S is on screen then the screen goes blank but the 2 bottom buttons are lit up and it vibrates every min or so. Now I have been reading and learning all weekend and am ok so far and am confident that after i get my jig off ebay in a few days (Cos the 3 button trick does not work) i can get in to download mode, then here is where i am a little unsure and would really appriciate some clear guidence on where to get the Stock rom from and what els do i need to download to use in odin? after downloading whatever I need to download what goes in to the fields on odin i have quoted below ?
1 PIT
2 PDA
3 PHONE
4 CSC
5 ETC
6 DUMP
I have watched a few very good vids on youtube but none clearly tell me what i need to download and what go in to each field in a none expert phone developpers language Please help?
Thanks Meurig.
Hi I'm currently at work be home in an hour or so ill send u the links and a guide how to reinstall the normal/ stock firmware.
NICK
Sent from my GT-I9000 using XDA App
mindiawl said:
Hi, thanks for your reply, but when I go to that website what do i download? Please see another thread i wrote earlier below.
Hi all, please can anybody help, I have bricked my galaxy s uk version so it only comes on to where the big S is on screen then the screen goes blank but the 2 bottom buttons are lit up and it vibrates every min or so. Now I have been reading and learning all weekend and am ok so far and am confident that after i get my jig off ebay in a few days (Cos the 3 button trick does not work) i can get in to download mode, then here is where i am a little unsure and would really appriciate some clear guidence on where to get the Stock rom from and what els do i need to download to use in odin? after downloading whatever I need to download what goes in to the fields on odin i have quoted below ?
1 PIT
2 PDA
3 PHONE
4 CSC
5 ETC
6 DUMP
I have watched a few very good vids on youtube but none clearly tell me what i need to download and what go in to each field in a none expert phone developpers language Please help?
Thanks Meurig.
Click to expand...
Click to collapse
Here is a guide you can follow:
1. Go to: http://www.samfirmware.com/
Go to Toolbox > Firmware > FW Android (and look for the firmware of your choice)
or (easy):
Download
ODIN 1.3
http://www.megaupload.com/?d=MADK0XTB
PIT (512) - file
Download: http://www.multiupload.com/I5WICSBFJ1
I9000XXJVO firmware (Android 2.3.3)
http://hotfile.com/dl/118194280/1ab7271/GT_I9000_XXJVO_XXJVO_OXAJVO.rar.html
2. Extract the zip (JVO-firmware) in a folder.
3. Open Odin as admin and boot phone into 'recovery mode':
- Connect your phone with the usb-cable and wait until Odin gives a green status and says 'connected'.
Mount the following files:
- PIT (512)
- PDA (from folder)
- PHONE (from folder)
- CSC (from folder)
Also check Re-Partition: ON
4. Press start and wait till your phone reboot properly (can take up too 10 minutes)
Good luck.
Wow thanks very much for that, i will try it tomorrow if hopefully my jig arrives. Thanks again and I'll let you know how I get on.
Sent from my galaxy s 2
No problem let me know if it worked
my galaxy fit is not booting normally or in recovery mode.it is going into download mode and ramdump mode.i have flashed it many time with the official firmware from sammobile.com after this problem but no luck.previously i had installed the cyanogen mod 10.1 rom in it.
cm-10.1-20130309-NIGHTLY-beni
"http://forum.xda-developers.com/showthread.php?t=2075503"
i got a video in youtube showing the same problem which i have for galaxy pop... " https://www.youtube.com/watch?v=VppXy6_1sAw "
i would be very thankful to anyone who can come up with a solution or help
my email id [email protected]
What error are u facing in Odin?
Galaxy_Rohit said:
What error are u facing in Odin?
Click to expand...
Click to collapse
while flashing in odin I get no erros the device flashes successfully but when the device starts after flashing the screen starts blinking neither it would go into recovery nor normally boot.....no blinking of screen in downloading mode or arm9 mode
Flash froyo first(since it is a full 4pkg firmware & contains bootloader as well). Then try flashing gingerbread & see if it succeeds. I can provide u my firmware files(ddkb1 & ddkt3) which 100% work everytime I flash 'em.
If still the problem persists then there are some other issues.
Galaxy_Rohit said:
Flash froyo first(since it is a full 4pkg firmware & contains bootloader as well). Then try flashing gingerbread & see if it succeeds. I can provide u my firmware files(ddkb1 & ddkt3) which 100% work everytime I flash 'em.
If still the problem persists then there are some other issues.
Click to expand...
Click to collapse
I have tried flashing froyo...i dont have the one package but different files.still no luck .even tried to install the clockwork mode recovery but it isnt even entering into recovery.if u can give me the download links to your file I can try flashing them.
Install this Samsung USB Driver on pc.
Note:-
*Use Odin v4.42
*Rename ops file exactly as "BENI_v1.0.ops"(without quotes)...(might b case sensitive, so be careful)
Goto download mode by keep pressing & holding Volume Down+Home+Power Buttons together until the phone turn on in "Downloading" mode.
First, flash Galaxy Fit Froyo 2.2.1(ddkb1)
Procedure:
OPS: BENI_v1.0.ops
BOOT: APBOOT......
PHONE: MODEM.....
PDA: CODE......
CSC: CSC......
Click "Start".:thumbup:
& then flash Galaxy Fit Gingerbread 2.3.6(ddkt3)
Procedure:
OPS: BENI_v1.0.ops
Tick one package in Odin & place that ".tar.md5" file under One Package field.
Click "Start".:thumbup:
Additional advice: Try another pc/laptop coz in most cases USB is the major issue
*This will work for sure*:thumbup:
However, if unfortunately none of these work for u, then give it to service center...only way left...
ok I will give it a try once again .....and do u think that there may be some other issues lyk some hardware part faliure....
If the Download Mode is stable, there's no failure on phone's side. Our Fit's hardware never failed for such circumstances.Hence, pc is the main issue.
I think that all kinds of wrongs are easily recovered if Download Mode still exists on the phone(some ppl have their phone blinking in Download Mode...which is bad).
& 1 more thing... those care takers will definitely tell u that u need to replace ur motherboard(even if its alright) which isn't a good deal IMO.
hey I tried it your way but the same problem.....i think I have to visit the customer care and see if they can hook up to something...and I thing it would be wise going for a new cell if they say to change the motherboard....and thanks for your help bro.....
goplu said:
...and I thing it would be wise going for a new cell if they say to change the motherboard....
Click to expand...
Click to collapse
Absolutely...!!!
Apparently there's a lot of people out there who bought the most international version of the Note3 in China: Galaxy Note 3 (China/WCDMA) SM-N9006. With scattered information on XDA and mostly information on the Chinese forums I thought I'd write up a quick rooting guide for all of the English speaking owners of this specific variant of the Note 3 phone.
WHY ROOT:
- Cause Stock Android nor the Samsung Experience isn't for everybody.
- The Samsung Galaxy Note 3 (China/WCDMA) SM-N9006 doesn't officially have Google Play, Gmail, and the essential lot of Google Services.
- I find a lot of Samsung bloatware reduction and battery / call quality / and other improvements from ROOTING an android phone.
- Great to have better control over your phone and most system related tweaking apps need ROOT.
- Besides, what's cooler than a newer custom built ROM?
>>> If you know of any solid Samsung Galaxy Note 3 SM-N9006 ROMS do share with others on the threads.
AM I ROOTED?:
Most likely no if you bought this phone from official sources. To check if your rooted use this app "Root Checker" its available on the Google Play market. If your on the stock android for the Samsung Galaxy Note 3 (China/WCDMA) SM-N9006 then you would need to look for some alternatives on its stock markets. After rooting your device you can use this same app to check if your rooted or not. If you follow these steps you should be rooted and have a much cooler experience with your Samsung Galaxy Note 3 SM-N9006 phone.
IS THERE A SAFER EASIER METHOD TO ROOT?
Yes, Mobile ODIN by @ChainfireXDA here: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro I haven't tried it, as of me writing this our Note3 variant is not supported. The price may be worth it down the line when its added to the list.
DO YOU INCLUDE THE FILES NEEDED?
Yes, I have them attached in the post but put links in the guide as well.
CAN YOU SUMMARIZE YOUR PROCRESS?
It involves you installing CWM recovery for our devices via ODIN and flashing "CF-AutoRoot" through CWM recovery on your Samsung Galaxy Note 3 SM-N9006.
CREDITS:
Go to all the sites with URLS listed on this guide and excellent team of developers on XDA. Also the team over at http://www.ibtimes.co.uk/ and ZOL.com http://samsung.zol.com.cn/278/98_2772226.html for visual guide to the root progress as well.
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Go here to find out on how check your firmware for the Samsung Galaxy Note 3 China Version SM-N9006 and update it: http://androidjinni.com/update-galaxy-note-3-chinawcdma-n9006zcubmj3-android-4-3-2417/
- DO NOT try this guide in any other Android devices it will work only with Galaxy Note 3 (China/WCDMA) SM-N9006.
- Check your device model number in: Settings » General » About Device
- This guide assumes that you have a factory unlocked Samsung Galaxy Note 3 SM-N9006 ( most of you should already as mine came unlocked ).
- This guide assumes that you are willing to take the risk of flashing your phone, I do not take responsibility for the mistakes you will make nor loss of your data.
- Try this guide at your own risk. It is very unlikely that you will damage your device if you following the instructions properly. Please check that you followed the instructions before posting comments.
- This guide assumes that your going to backup your data prior to proceeding.
- This guide assumes you have access to a Windows XP (or above) PC. I have not rooted on virtualized software.
- This guide assumes that you are aware about the Flash Counter and Samsung Knox Warranty issue. This method is not safe (it will void your warranty status).
- Once your device is rooted you may not be able to receive any future OTA updates. You should be able to flash firmware updates manually by looking for them on official forums.
- I am not responsible for dead-links from the sites containing files needed for this guide. I do not take ownership of such files, credit goes to respective developers.
- This guide was written while I was having a few beers, some minor grammar and spelling mistakes to be expected.
- This guide assumes you chose "English" as the devices default language during setup...my instructions are in English and phone language is as well ( not that it makes any big difference ).
PRE-ROOTING
++++++++++
1. Make sure you have at least 90% battery life remaining ( I recommend you fully charge the phone though - old habits die hard ).
2. Enable Debugging mode for your for Samsung Galaxy Note 3 China Version SM-N9006 in: Settings » General » About Device . Now tap the Build Number seven times. You will see a count down notification and a "your now a developer" which enables the Developer Options. Now go to Settings » General » Developer Options » USB Debugging ( check the USB Debuggging checkbox ).
3. Make sure you have unchecked the "Reactivation Lock" setting in: Settings » General » Security » Reactivation Lock
4. Make sure you use a PC running Windows XP and above with the latest USB Drivers for Galaxy Note 3 SM-N9006. Get drivers and other ADB tools from here: http://forum.xda-developers.com/showthread.php?t=2038555 You can skip this step if you have KIES installed on your PC.
5. Make sure use the latest version of ODIN. Get the current on here: https://hotfile.com/dl/248246506/848df76/Odin3_v3.09.zip.html Save this file because you will need it in the rooting guide.
6. Make sure you have downloaded CWM recovery and do not extract the .tar file, you will need it for later. https://hotfile.com/dl/246835247/21b6180/n9006-cwm-recovery-6.0.3.7(0922).tar.html
7. Make sure you have downloaded "CF-AutoRoot", thanks to @ChainfireXDA here: http://download.chainfire.eu/360/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-h3gduosctc-smn9009.zip and copy it to the SD card of the phone.
8. Make sure you backup your data. Since the phone is new I'm sure you won't need anything but your phone logs and sms. Head over here for instructions: http://androidjinni.com/how-to-take-complete-backup-of-android-phone-505/ . There's plenty of apps on Google Play to backup your phone and sms logs. Samsung Kies also helps.
ROOTING STEPS: Samsung Galaxy Note 3 China Version SM-N9006
+++++++++++++
Step-1: Install the USB drivers for your Device from Point 4. above (I recommend you to have full admin rights when you install the .exe file) and test that your phone gets recognized when you plug it into your PC (you shouldn't get something like "driver failed"). You should be able to see the notification of a new device / drive if you were successful.
Step-2: Unzip the ODIN files from Point 5. above ( there should be a folder with an ODIN..exe file ) which you would need to copy to that folder and its files to your drive ( desktop would do ). Run the ODIN..exe file. It will not list any connected devices.
Step-3: Make sure you have backed data from your Samsung Galaxy Note 3 China Version SM-N9006 and you have at least 90% battery left. From this step you will be saying bye to your rooted phone state and possibly your important data.
Step-4: Turn off your Samsung Galaxy Note 3 China Version SM-N9006 and make sure its completely powered down.
Step-5: This part is a bit tricky for some people, you may need a try it several times. Its also a very crucial step. Make sure you have ODIN running on your PC. Place the Samsung Galaxy Note 3 in Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will appear, like the one below:
Now press the Volume Up button to continue to enter Download Mode. Don't worry about the screen looking like something is broke like below.
When the phone is connected successfully an Added message will appear under Odin. Also, ID: COM box in Odin will turn blue with COM port number, indicating successful connection.
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If Odin still fails to recognize the device then re-install USB driver.
Step-6: In Odin, click the PDA button and select the CWM recovery file with .tar extension from the location you on your pc you put it in.
Step-7: Make sure that on Odin the "Verify Auto Reboot" and "F.Reset Time" checkboxes are selected. Uncheck the "Re-Partition" option.
Step-8: When everything is set, click the Start button in Odin and wait for Odin to flash the custom recovery on your phone. DO NOT unplug your phone. Hopefully you see a green pass.
Step-9: Once the flashing process is completed, the phone will restart automatically. And soon a PASS message with green background will appear in the extreme-left box at the top of Odin indicating successful installation. Now unplug the USB cable from the Samsung Galaxy Note 3 SM-N9006 to disconnect it from the computer.
Step-10: Power off the Samsung Galaxy Note 3 and boot it into recovery mode by pressing and holding Volume Up and Power buttons together.
Step-11: In CWM recovery, select install zip from sdcard then select choose zip from sdcard. Navigate to the "CF-AutoRoot" zip file which was earlier copied to the SD card of the phone from Point.7 from the Pre-rooting section of this guide. Select it using the Power button and confirm installation
Step-12: Power off the Samsung Galaxy Note 3 and boot it into recovery mode by pressing and holding Volume Up and Power buttons together
Step-13: In CWM recovery, select install zip from sdcard then select choose zip from sdcard. Navigate to the SuperSU zip file which was earlier copied to the SD card of the phone. Select it using the Power button and confirm the installation.
Step-14: When the installation process is completed, return to the main recovery menu and reboot the phone by selecting "reboot system now"
Congratulations your Samsung Galaxy Note 3 SM-N9006 is now rooted. You can use the "Root Checker" app to verify this.
Looks like we can safely root this variant of the Note 3 without getting the Knox count :highfive:
Thanks to the devs @designgears & @Chainfire of the Root De La Vega [KNOX 0x0 Root - Lots of Versions - No Exynos]
Please choose the correct AP files and CSC files only for our phones, they should be:
AP Version: N9006ZCUBMJ3_VEGA.tar
CSC: N9006CHNBMJ3_CSC.tar.md5
Please head over to the link below for instructions and follow those directions precisely as described.:good:
http://forum.xda-developers.com/showthread.php?t=2479952
New Stock Firmware N9006ZCUBMI5
To check your AP and CP version Dial *#1234# (If SuperSU opens, press the back button)
SM-N9006 (China).
Build Date: 11.09.2013 -> Region: CHN (China) PDA: N9006ZCUBMI5 Changelist: 1590669 Android: 4.3 Download Link or Download Kernel
Credits to: @AdamLange
# WARNING
# DO NOT # Root using Kingo App or VROOT app, I just found out they have malware and XDA community is banning their threads until they find out what is going on.
# This applies to our SM-N9006 / Samsung Galaxy Note 3 N9006
From XDA
Kingo and vroot have been determined to be malware and unsafe for use, as such all threads will be closed and links removed. Thank you
I am currently following the discussion here: http://forum.xda-developers.com/showthread.php?p=46595305
I hope we can have an app similar to Kingo App working, I realize it will make easier for normal folks to root our Note 3 with 1 click ( which is super easier but has some security risks ).
Hello,
I can't apply your tutorial... I can't boot in to Download Mode. When I try, I arrives in a menu with this:
Select Boot Mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[Recovery Mode] <<==
[Fastboot Mode]
[Normal Boot]
I can move cursor to all three possibilties, but can't choose anyone. And, there is no "Download Mode".
Is there a tips to enter in Download Mode ? Otherwise ?
Thank you in advance
luisfigueira said:
Hello,
I can't apply your tutorial... I can't boot in to Download Mode. When I try, I arrives in a menu with this:
Select Boot Mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[Recovery Mode] <<==
[Fastboot Mode]
[Normal Boot]
I can move cursor to all three possibilties, but can't choose anyone. And, there is no "Download Mode".
Is there a tips to enter in Download Mode ? Otherwise ?
Thank you in advance
Click to expand...
Click to collapse
Strange its usually pretty simple, did you try doing this below? And is your phone SM-N9006? (sorry for asking a dumb question)
Place the Samsung Galaxy Note 3 in Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will appear...Now press the Volume Up button to continue to enter Download Mode. Don't worry about the screen looking like something is broke..
Click to expand...
Click to collapse
Thank you for your prompt answer.
Yes, I have:
Model:
SM-N9006
Build Number:
JSS15J.N9006ZCUBMI5
My phone came rooted but without CMW. I want install CMW to install Gapps 4.3
I'm agree with you, normally it's very easy and goes well, but this time, I don't know what happens... :crying:
Anyway, I'm happy that you try to help me !
(and sorry for my english, not always good ^^)
luisfigueira said:
Thank you for your prompt answer.
Yes, I have:
Model:
SM-N9006
Build Number:
JSS15J.N9006ZCUBMI5
My phone came rooted but without CMW. I want install CMW to install Gapps 4.3
I'm agree with you, normally it's very easy and goes well, but this time, I don't know what happens... :crying:
Anyway, I'm happy that you try to help me !
(and sorry for my english, not always good ^^)
Click to expand...
Click to collapse
Oh, your question is on installing CMW...my post is about rooting. There's instructions on this post: http://forum.xda-developers.com/showthread.php?t=2474697 which talks about Gapps for the N9006 and N9002
Let me know if that helps you
Hi,
Not working... I'm always blocked at screen:
Select Boot Mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[Recovery Mode] <<==
[Fastboot Mode]
[Normal Boot]
I tried to flash new firmware, or reflash same firmware, but SP Flash Tool doesn't detecte my phone
I think I read all tutorials in internet...
same here stuck at samsung logo cant enter download at recovery mode
same here stuck at samsung logo cant enter download at recovery mode
How to reflash
I have chinese Samsung Note3 named Kaswah.
Model:
SM-N9006
Build Number:
JDQ39.N9006ZCUBMHJ
First, I can't uncheck Reactivation Lock because there's not such an option in menu.
By pressing volume up + power button, I get the same menu mentioned above by luisfigueira. However scrolling to Recovery Mode and confirming gets me to see the construction Android robot and a triangle, which is one step before getting into Download Mode as mentioned in "How to update your Android device Firmware" . I am not allowed to post outside link here.
Afterwords pressing power button should get me into Download Mode. But nothing happens. I tried to connect to PC at the moment with running ODIN, but the phone wasn't recognised.
On the other side by pressing volume down + power button gets me to "Factory mode". I get tiny menu with 7 different items in left top corner. Everything in the menu is in chinese though. At the end of sixth item in menu is "e MMC". The only thing I can read. No clue what to choose or how to confirm.
Any help would be very appreciated since the phone is working "erratically". No data connection, despite label under battery saying 3G.
I think that reflashing would solve strange behavior, but first I need to know how to get there.
Hello there, i may wan to ask i not sure my clone phone is it from china. But when i go to the factory mode, it display all the chinese words. Can i use your firmware to root my phone? SM-N9006 N9006XXUAMF5 android 4.3 kernel 3.4.5
petokato said:
I have chinese Samsung Note3 named Kaswah.
Model:
SM-N9006
Build Number:
JDQ39.N9006ZCUBMHJ
First, I can't uncheck Reactivation Lock because there's not such an option in menu.
By pressing volume up + power button, I get the same menu mentioned above by luisfigueira. However scrolling to Recovery Mode and confirming gets me to see the construction Android robot and a triangle, which is one step before getting into Download Mode as mentioned in "How to update your Android device Firmware" . I am not allowed to post outside link here.
Afterwords pressing power button should get me into Download Mode. But nothing happens. I tried to connect to PC at the moment with running ODIN, but the phone wasn't recognised.
On the other side by pressing volume down + power button gets me to "Factory mode". I get tiny menu with 7 different items in left top corner. Everything in the menu is in chinese though. At the end of sixth item in menu is "e MMC". The only thing I can read. No clue what to choose or how to confirm.
Any help would be very appreciated since the phone is working "erratically". No data connection, despite label under battery saying 3G.
I think that reflashing would solve strange behavior, but first I need to know how to get there.
Click to expand...
Click to collapse
> Very strange, I have the Note 3 version and firmware displayed in my XDA signature. Reactivation Lock is in:
" Settings> General> Security > Reactivation Lock "
> You should be able to easily get into Download mode, its a bit tricky. I will try and post a better explanation when I get time.
> Flashing your phone via ODIN or KIES is simple, just find the firmware you need to flash specifically for this phone. Note you will void your warranty. I have posted a link to a recent firmware on here somewhere.
hausam said:
Hello there, i may wan to ask i not sure my clone phone is it from china. But when i go to the factory mode, it display all the chinese words. Can i use your firmware to root my phone? SM-N9006 N9006XXUAMF5 android 4.3 kernel 3.4.5
Click to expand...
Click to collapse
Note sure about this, I have rooted on: SM-N9006 / N9006ZCUBMJ3 and it looks like something is different with your firmware as others have reported issues with getting to "download mode" so do it at your own risk.
I mentioned:
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Attention rooters
I have rooted on: SM-N9006 / N9006ZCUBMJ3 and it looks like something is different with some firmware versions of N9006 as others have reported issues with getting to "download mode".
I have not tried rooting on other firmware variants of N9006.
I mentioned:
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )[/QUOTE]
1 Click Rooting SM-N9006 ( Warranty Safe )
As you all know KingoApp is still under investigation on XDA: http://forum.xda-developers.com/showthread.php?p=47158184 but I helped my friend root this N9006 model / info below and it works brilliantly!!!!! You get to keep all your apps, no flashing needed or download mode fiddling.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Just go to the KingoApp website, pick our phone model under Samsung N9006, download the app on your windows native machine ( I used Windows 8.1), run the app as "admin" and follow its instructions, that's all, really super awesomely simple I got my friend loving his Note3 rooted and laughing at my old method
I'm not promoting KingoApp, but I double checked on his phone after rooting with it. There was no strange Apps running on the background.
Earlier reports had pointed out some strange apps running on the background and rooting error messages pertaining to access permissions after installing KingoApp. But it looks like KingoApp has been updated because my friend's phone is clean. Zero permission errors and no strange background apps running.
Knox is 0x0, warranty is safe so that's good, he has not frozen or messed with any system apps yet (at least I didn't advise him to until a solid rom comes out).
My friend is Chinese of course, so if you don't mind all the warnings I'd like to say that you can use KingoApp but......like all things, at your own risk.:laugh:
michael1982t said:
As you all know KingoApp is still under investigation on XDA: http://forum.xda-developers.com/showthread.php?p=47158184 but I helped my friend root this N9006 model / info below and it works brilliantly!!!!! You get to keep all your apps, no flashing needed or download mode fiddling.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Just go to the KingoApp website, pick our phone model under Samsung N9006, download the app on your windows native machine ( I used Windows 8.1), run the app as "admin" and follow its instructions, that's all, really super awesomely simple I got my friend loving his Note3 rooted and laughing at my old method
I'm not promoting KingoApp, but I double checked on his phone after rooting with it. There was no strange Apps running on the background.
Earlier reports had pointed out some strange apps running on the background and rooting error messages pertaining to access permissions after installing KingoApp. But it looks like KingoApp has been updated because my friend's phone is clean. Zero permission errors and no strange background apps running.
Knox is 0x0, warranty is safe so that's good, he has not frozen or messed with any system apps yet (at least I didn't advise him to until a solid rom comes out).
My friend is Chinese of course, so if you don't mind all the warnings I'd like to say that you can use KingoApp but......like all things, at your own risk.:laugh:
Click to expand...
Click to collapse
Thanks for the detailed instructions.
But I am having some problems.
CWM installed successfully. In recovery mode I go successfully.
But when installing Avto-Root takes what the error is related to verification and the device reboots.
Prompt if you had a similar problem? How do you cope with it?
Thanks in advance for your reply.
michael1982t said:
I have rooted on: SM-N9006 / N9006ZCUBMJ3 and it looks like something is different with some firmware versions of N9006 as others have reported issues with getting to "download mode".
I have not tried rooting on other firmware variants of N9006.
I mentioned:
WARNING
++++++++++
- This guide assumes that you have the following phone model for the Note 3, and only this one.
SM-N9006
N9006ZCUBMJ3
Android 4.3 ( STOCK )
Click to expand...
Click to collapse
[/QUOTE]
Hi,
My name is Daniel and I am from Malaysia.
Just 2 days ago i bought a Samsung Note 3 clone from a night market costing RM600 (US186.7).
Everything works fine, except there are some options not available from the settings, like the power saver option. And it can't add Google Account for my contacts synchronization. Does rooting solve this problems?
And i have read through the whole thread but cant find any rooting file on my phone specification. I attached herewith 'About My Device" information for your information.
Thank you.
Daniel
Its not a note 3, its a cheap china copy...no firmware for note 3 will work on it...
Teleported from my SM-N9005 from the Enterprise
Hello dude, can you provide a flashable version of your rom SM-N9006 N9006ZCUBMJ3? can you do this for us? i think it's about 10 minuts
Hello,
Am new on this forum, and basically new at android operative system. So I wanted to root my Samsung Galaxy Young GT-S6310 via Odin and I got PASS! But afterwards I couldn't enter CWM by pressing Vol+ Home Power button...Phone wasn't practically rooted but it was still working fine.
But after two days I thought of resetting it to STOCK and I used the option in Samsung settings. After the phone restarted and tried to boot up, the screen froze and it couldn't load further. Practically I cannot do anything because OS is not loading.
I have access to Vol- Home Power but I tried many tar files tru Odin to replace but i failed.
Can ANYONE help me out with this please? I just wanna make the phone work again.
Thanks A LOT in advance!
hello buddy
go to sammobile download a stock rom for your device then on your phone enter download mode and flash stock rom thru odin
try this and tell me what u get
good luck
Sent from my GT-S6312 using XDA Free mobile app
Hello bud. While i was waiting for any answer (even before yours) i used some tar.md5 thru Odin and luckly somehow got to use it normally again. Then i used kies n return my device to stock and after dat wiped all my data ...phone works fine now all good...but i would still like to root my s6310. Any idea?
Thanks for ur first post tho.
Newbee android said:
Hello bud. While i was waiting for any answer (even before yours) i used some tar.md5 thru Odin and luckly somehow got to use it normally again. Then i used kies n return my device to stock and after dat wiped all my data ...phone works fine now all good...but i would still like to root my s6310. Any idea?
Thanks for ur first post tho.
Click to expand...
Click to collapse
For rooting use an app named "framaroot" install this app on your phone and open it and set it to install superuser (super su is not recommended) and select gandalf exploit if u get a success reboot your device
Here is a link for framaroot: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
Good luck
Press thanks if i helped ..sent from my galaxy note 8.0
i tried to root my s5 mini duos G800H, didnt work got my fone bricked i think, does not turn on, i can only go into the recovery modes, vol up and the vol down ones, i have downloaded a few "stock roms" but none have got my fone back into normal, i downloaded a "recovery" used Odin 3.10.7, did all the right things as videos show to do went to AP, hit start, the recovery one gives "PASS" but when i turn it on (REBOOT) it stays at SAMSUNG S5 MINI screen (LOGO). i reboot it into the volume UP and it gives me a "recovery is not seandroid enforcing"... so ok now i tried to download a new "stock ROM" this one here "twrp_kmini3g-31102014-2247" now when i go into volume UP i get a menu "team win recovery project v2.8.1.0"... but still cant get the fone to start what do i do? what am i doing worng, can someone please help me just get the fone back to normal.? 3 days without a cell fone
Modelo: SM-G800H/DS
Also, when i go to sites where there is a list of firmwares to download, there are a few differente contries does it matter witch one i pick? i dont know where my fone is form is there a way to find out?
Well ,
U only need to odin the stock firmware for phone , what ever the country firmware u can try it , lile the BTU firmware there ok
& u can post ur question on ur device forum
http://forum.xda-developers.com/galaxy-s5-mini
Thank you for using XDA Assist ,,