Someone installed it?
I'm wondering if it's worth to upgrade from P6200XXLQ1.
komoornik said:
Someone installed it?
I'm wondering if it's worth to upgrade from P6200XXLQ1.
Click to expand...
Click to collapse
I have installed by ODIN, the rom is stable but there are big news than LQ1 ...
Changelog and link please. Thank you!
Got it from here, but haven't installed it yet.
hotfile.com/dl/170880162/f6875e7/GTP6200_ATO_P6200XXLQ2_P6200OXALQ2_original.zip
Graffiti Exploit said:
Changelog and link please. Thank you!
Click to expand...
Click to collapse
Download link :http://www.hotfile.com/dl/170840532/6b5fbbe/P6200XXLQ2_P6200OXALQ2_ATO.zip.html
Changelog bere : small changes , increase battery life and more fluid system.
Are there any bugs present or observed? Is 3G working well even if it's not your region? LQ1 works fine even if it's not my region. Thanks again.
Installed this one with Odin. Just one question the baseband still shows as P6200XXLQ1 even though Kernel is 3.0.15-P6200LQ2 and Build Number is IMM76D.XXLQ2.
Is it normal for Baseband version to still show P6200XXLQ1 or have I made an error somewhere?
I decided to flash the Philippines(SUN)(August) because it's my region and it's newer than the Open Austria firmware(July). I have to say it has better battery life. Performance wise, it got a little better based from the quadrant scores I took. Higher overall scores than LQ1 and system feels a bit more faster. Although one time, System UI forced closed for no apparent reason and it lagged so much before that but it's gone now. I have no idea what caused that.
Does your Baseband Version still show P6200XXLQ1 ?
Problems with 3G
Installed this ROM a few days ago. Everything worked well except 3G. Voice calls and SMS also worked. After a failed automatic configuration of the APN, I set it manually but without success.
So, I downgraded it to the original HC 3.2. and wait the official update for my region (Romania).
kazprotos said:
Does your Baseband Version still show P6200XXLQ1 ?
Click to expand...
Click to collapse
Yep, my baseband also shows that. Flashed with mobile odin.
kazprotos said:
Does your Baseband Version still show P6200XXLQ1 ?
Click to expand...
Click to collapse
Nope, it shows the new one for the firmware.
Strange my Baseband still shows XXLQ1
kazprotos said:
Strange my Baseband still shows XXLQ1
Click to expand...
Click to collapse
Modem.bin it's the same as LQ1 no change in LQ2 !
3G don't work
Had someone experienced problems with 3G ?
After flashing P6200 XXLQ2 everything works OK but not 3G. The SIM card is recognised, voice calls and SMS can be sent/received. All APN settings are correct.
Can someone give me a suggestion?
Yull said:
Had someone experienced problems with 3G ?
After flashing P6200 XXLQ2 everything works OK but not 3G. The SIM card is recognised, voice calls and SMS can be sent/received. All APN settings are correct.
Can someone give me a suggestion?
Click to expand...
Click to collapse
download the stock honeycomb and flash MODEM_P6200LVJKL4_REV_04_CL1089917.tar using Odin... should get your 3g back
Works Fine
Everything works absolutely fine.. including 3g..
i dont notice any difference from the previous version in terms of performance or battery life. im talking about real world experience, not benchmark wise.
ENJOY..
It doesnt seem to be a MUST UPGRADE.
Hope it helps..
cheers.
Graffiti Exploit said:
I decided to flash the Philippines(SUN)(August) because it's my region and it's newer than the Open Austria firmware(July). I have to say it has better battery life. Performance wise, it got a little better based from the quadrant scores I took. Higher overall scores than LQ1 and system feels a bit more faster. Although one time, System UI forced closed for no apparent reason and it lagged so much before that but it's gone now. I have no idea what caused that.
Click to expand...
Click to collapse
hey pal, after the update, is your tab still unlocked? just curious because it's a carrier tailored version. i want to upgrade my open austria to globe's firmware, too.
oh, and if it doesn't have a carrier (in parentheses) beside the Country/Carrier, that would mean that it's unlocked, yes?
oh, and after this update, if you're int he philippines, will kies work? i bought my unit in HK, so i'm curious if it's because of the austrian rom that i'm getting an error from kies saying that my device does not support upgrading via kies. is it in order for me to upgrade via kies, i need to install the HK version again?
Now, that's a lot of questions. Sorry and thank you so much for the answers!
Problem solved
mo-mo said:
download the stock honeycomb and flash MODEM_P6200LVJKL4_REV_04_CL1089917.tar using Odin... should get your 3g back
Click to expand...
Click to collapse
Flashed again 3 days ago, then even changed CSC from ATO to XEU (UK) using AnyCut. But funny thing is the APN settings from the website of my ISP were wrong. Now, everything is OK!
Thank you anyway!
dinzkie said:
hey pal, after the update, is your tab still unlocked? just curious because it's a carrier tailored version. i want to upgrade my open austria to globe's firmware, too.
oh, and if it doesn't have a carrier (in parentheses) beside the Country/Carrier, that would mean that it's unlocked, yes?
oh, and after this update, if you're int he philippines, will kies work? i bought my unit in HK, so i'm curious if it's because of the austrian rom that i'm getting an error from kies saying that my device does not support upgrading via kies. is it in order for me to upgrade via kies, i need to install the HK version again?
Now, that's a lot of questions. Sorry and thank you so much for the answers!
Click to expand...
Click to collapse
It is still unlocked. Do note that I'm using the SUN version, I think using Globe's or Smart's firmware will lock it, not sure. I am a SUN user but I tried a Smart Sim and it worked fine.
I did not see a Philippine ICS firmware without a carrier name on sammy.
Kies works here in the Philippines. It says it is the latest firmware.
Related
hi all.. I started on HC...
then to LQ1
then LQ2,
now I see LP5..
Can you say what are the differences?
Should I flash again?
I'm in the USA.
thanks.alot
XALQ1 first released ics for austria... XXLQ2 is an update to it... they fixed something... but dont have any log on what they fix...
ZSLP7 release for HK. did not have face unlock
DDLP5 is indian release version. dont really have any different with LQ2
OK.. thanks alot
I also moved from XXLQ2 to DDLP5.
This was a mistake, no improvements and if anything the wifi problem is even worse under DDLP5.
I wish Samsung would fix the wifi issue, it is a major problem for me.
Lacks copy paste option on many apps...talk qq, firefox. ..., while those were working fine on LQ2 rom
Sent from my GT-P6800 using xda app-developers app
i dont seem to facing any of the problem that you guys have... lucky me...
Just reflashed back to XXLQ2.
Wifi semi-operational again. More not working than working, but what can you do ?
Samsung could do much better if they started fixing their software, not sure if I could recommend these tablets to anyone that I know.
That said, the P6800 hardware is excellent - but I need a fully functional Jelly Bean software release !!!
BTW, is there a limit on the number of these Odin 1.85 flashes that one can do ?
Jola013 said:
Just reflashed back to XXLQ2.
Wifi semi-operational again. More not working than working, but what can you do ?
Samsung could do much better if they started fixing their software, not sure if I could recommend these tablets to anyone that I know.
That said, the P6800 hardware is excellent - but I need a fully functional Jelly Bean software release !!!
BTW, is there a limit on the number of these Odin 1.85 flashes that one can do ?
Click to expand...
Click to collapse
Hmm, not too sure I've never had any problems with WiFi..
I gets the signal, and connects fine, LQ1 LQ2, and DDLP5
But I was with LQ1 previously and when I traveled abroad, mine could not connect to the most of WiFis even when GS2 connected just fine..
(on the way back home at airport, I fleshed to one of the CM9 Jellybean 1.3v and paranodroid, (see the devel forum), but still had the WiFi problem connecting to airport WiFi...
when I got back home, I fleshed to LQ2 and also DDLP5, they all worked fine (but of course only tested with my home WiFi..)
But when I fleshed this time, one thing I did was to really wipe Everything using cwm v6.0.01, (formating /system, /sdcard as well) except the external_sdcard.
My 6800 is hk version, whats yours? try fully wiping everything and flesh to DDLP5 ? I think the DDLP5 feels a bit smoother..
cheers
dlee064 said:
Hmm, not too sure I've never had any problems with WiFi..
I gets the signal, and connects fine, LQ1 LQ2, and DDLP5
But I was with LQ1 previously and when I traveled abroad, mine could not connect to the most of WiFis even when GS2 connected just fine..
(on the way back home at airport, I fleshed to one of the CM9 Jellybean 1.3v and paranodroid, (see the devel forum), but still had the WiFi problem connecting to airport WiFi...
when I got back home, I fleshed to LQ2 and also DDLP5, they all worked fine (but of course only tested with my home WiFi..)
But when I fleshed this time, one thing I did was to really wipe Everything using cwm v6.0.01, (formating /system, /sdcard as well) except the external_sdcard.
My 6800 is hk version, whats yours? try fully wiping everything and flesh to DDLP5 ? I think the DDLP5 feels a bit smoother..
cheers
Click to expand...
Click to collapse
I ordered my tablet from HK, but not sure that it is HK version, how do you tell ?
I have had wifi problems with LQ1, LQ2 and LP5.
But it seems to be more of an issue when there is more than one router around - so it does not always happen. But it never happened with HC.
Jola013 said:
I also moved from XXLQ2 to DDLP5.
This was a mistake, no improvements and if anything the wifi problem is even worse under DDLP5.
I wish Samsung would fix the wifi issue, it is a major problem for me.
Click to expand...
Click to collapse
I have also faced same problem with Wifi so back to honeycomb it is bit slow but better than annoying wifi dropping issue with ICS.
some say after clearing data and factory reset this problem solves but not happened in my case!
If you are lucky may be it will help you!
Give it a try!
Regards,
Ashwin
it take alot of nerve to do a factory reset with these babies.. not a lot of safe kernels available.... only 1 really
LQ2 vs LP5
jimmbomb said:
it take alot of nerve to do a factory reset with these babies.. not a lot of safe kernels available.... only 1 really
Click to expand...
Click to collapse
I use LP5 and luckily for me i have no issue (wifi works fine, performance with antutu benchmark (6194) is good compared with LQ1 AND LQ2 -no overclock). I did factory data reset as well as using this (https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature=search_result) to enable my kies identify the device. I am using recovery from locerra (http://forum.xda-developers.com/showthread.php?t=1542897). The only boot loop happen when i want to do supercharge v6. Perhaps, i slipped up the procedure. No dare to repeat again.
Using locerra's cwm should be safe for a factory reset as it uses a safe kernel. Note that recovery has its own modified kernel that is used for the various operations. It does not use the rom's running kernel on the 7.7.
Sent from my GT-P6800 using xda premium
kishd said:
Using locerra's cwm should be safe for a factory reset as it uses a safe kernel.
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
Thanks.....
Can you give us a link to ' locerra's cwm' for our 6800's??
Thanks again
Thread moved to Q & A section, post in the relevant section next time.
XXLQ2 is good enough！
niceashwin79 said:
I have also faced same problem with Wifi so back to honeycomb it is bit slow but better than annoying wifi dropping issue with ICS.
some say after clearing data and factory reset this problem solves but not happened in my case!
If you are lucky may be it will help you!
Give it a try!
Regards,
Ashwin
Click to expand...
Click to collapse
Hi Ashwin,
Can I flash a different country's ROM on my tab 7.7 (saudi / middle east) as ICS is officially still not available for the middle east. Are the firmwares available on sammobile & samsung-updates dot com genuine and risk free ? If yes, then how do I flash it on the tablet.
Sorry for the questions, still a newbie
Regards,
Kaustav
I noticed a lot of users discussing firmwares in plenty of threads. Seeing that you guys lacked a dedicated thread to have general conversation on firmwares and their usage, I have created one.
Feel free to post details regarding official firmwares, news, changelists, your review/experience etc
Note: This thread is not to be confused with the Off-topic thread.
Thats What We Really Need
Is it still the case that the German release gets the official firmware updates before the UK model, was looking at the 32Gb model on the German Amazon site?
Super Chimp said:
Is it still the case that the German release gets the official firmware updates before the UK model, was looking at the 32Gb model on the German Amazon site?
Click to expand...
Click to collapse
seems to be the case
many of us have flashed to DBT firmware, changed the CSC to DBT and are running as if we have german S4 i9505's
Sorry guys all new to this, previously iPhone user (dont hate).
My firmware ver. is I9055XXUBMG7 with EE. How can I root? Where's a nice guide I can find?
ChainFire (CF) is the fav
Hi. I got the mg5 ota today. Have updated the phone.. as usual it just says stability improvement.. has anybody seen any improvements?
Sent from my GT-I9500 using xda app-developers app
tidusjar said:
Sorry guys all new to this, previously iPhone user (dont hate).
My firmware ver. is I9055XXUBMG7 with EE. How can I root? Where's a nice guide I can find?
Click to expand...
Click to collapse
Use CF Auto Root to root your phone, read the instructions carefully!
Updated to latest MG5 update.
Changes I felt so far:
- Phone feels faster.
- More free RAM (Screenshot attached, after normal usage and no clearing of memory).
- Camera opens faster.
- Weather widget still get cleared but it comes back instantly.
Been running EE EVR MG7 for about a week and I've noticed that when it goes into sleep - WIFI disconnects.
This means it uses up my 4G data when the screen is not on. It does reconnect when the screen comes on though.
Anyone else experienced the same? A friend of mine moved up to DBT MGA and said he got the same thing (for some reason one of the programs killed 1Gb of data in one night lol!)
Was thinking of moving to BTU MGA if its any different? thanks in advance.
zoomee said:
Been running EE EVR MG7 for about a week and I've noticed that when it goes into sleep - WIFI disconnects.
This means it uses up my 4G data when the screen is not on. It does reconnect when the screen comes on though.
Anyone else experienced the same? A friend of mine moved up to DBT MGA and said he got the same thing (for some reason one of the programs killed 1Gb of data in one night lol!)
Was thinking of moving to BTU MGA if its any different? thanks in advance.
Click to expand...
Click to collapse
Do not own this phone, so the answer may vary.
But afaik, Android defaults to cellular connection in sleep. There is an option in your wifi settings which allows you to select "wifi-connected" during sleep.
Search around in wifi and network related settings.
Switch it to "never"
a.cid said:
Do not own this phone, so the answer may vary.
But afaik, Android defaults to cellular connection in sleep. There is an option in your wifi settings which allows you to select "wifi-connected" during sleep.
Search around in wifi and network related settings.
Switch it to "never"
Click to expand...
Click to collapse
Found it - thanks bud - sneeky gits at EE must have turned it off as default
zoomee said:
Found it - thanks bud - sneeky gits at EE must have turned it off as default
Click to expand...
Click to collapse
It's been there since froyo days.
cirian75 said:
seems to be the case
many of us have flashed to DBT firmware, changed the CSC to DBT and are running as if we have german S4 i9505's
Click to expand...
Click to collapse
Thanks. When I had the original Note that seemed to get firmware updates before the UK model so I am not surprised to hear this is still the case.
Im in uk on 3 network. . Got my ota mga update last night at work.. im all you can eat data so did the update straight away.
Went through all my apps and moved everything movable to sd card.. yet in storage it still says I have 5 gig of apps in device mem..
Dont understand..
Sent from my GT-I9505 using xda app-developers app
la8rat said:
Im in uk on 3 network. . Got my ota mga update last night at work.. im all you can eat data so did the update straight away.
Went through all my apps and moved everything movable to sd card.. yet in storage it still says I have 5 gig of apps in device mem..
Dont understand..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Hi,
You can move the apps,but you CANNOT move the data.
The only way is to use FOLDERMOUNT
I'm looking to install the google edition Firmware GT-I9505G.. And I have a couple of questions for those who use it ..?
Is it good...? Does it work flawlessly?
How do updates work on it? Can I get OTA updates?
Can you give me name or a link to the download?
Thanks in advance
Sent from my GT-I9505
onbacardi said:
I'm looking to install the google edition Firmware GT-I9505G.. And I have a couple of questions for those who use it ..?
Is it good...? Does it work flawlessly?
How do updates work on it? Can I get OTA updates?
Can you give me name or a link to the download?
Thanks in advance
Sent from my GT-I9505
Click to expand...
Click to collapse
The best way to find out is probably to read the thread, or at least the first post and the last load of recent pages. From what I have read/seen it seems to be very good and certainly usable for daily use. I don't think you should accept (or even receive) any OTA updates. As its essentially a custom ROM its probably safer to let the developer create a new update to flash. I have downloaded the 4.2.2 version but haven't installed it just yet, been hanging on for a new 4.3 version.
malybru said:
Hi,
You can move the apps,but you CANNOT move the data.
The only way is to use FOLDERMOUNT
Click to expand...
Click to collapse
Doesn't that beg the question. . What's the point ?
Sent from my GT-I9505 using xda app-developers app
la8rat said:
Doesn't that beg the question. . What's the point ?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Absolutely!
You need to address that question to Samsung.
I am starting this thread so us Nordic users can discuss anything about the latest update 4.4 once it is out.
Hopefully we will see it soon!
Been waiting way too long
Update: 4.4 is now available!
Sent from my SM-N9005
Anyone seen a Nordic update??
Arrgh
Anyone seen a Nordic update??
Click to expand...
Click to collapse
No - And it´s getting a bit frustrating i might add.
Check out Sammobile - It has become increasingly & annoyingly difficult to swing a dead cat around you without hitting obscure carrier specific KitKat updates left & right.
But 5 entire nordic countries?? Ohh - No.
We ought to contact Amnesty International and get "Update With holding" registered as an official form of torture. :silly:
At the very least it might have been usefull as an "Improved interrogation technique" at Guantanamo! :crying:
Regards
Elo.
I personally don't see any point in upgrading to KitKat as per now as it messes up more stuff than it actually "fix". NO move to SDcard support, battery drain for no apparent reason, locked bootloader and so on.
Correct me if I am wrong...
Seems like we are forgotten by sammy. Kitkat came in january and now 3 months later still nothing. Out last update was in december. lol.
I dont really need kitkat, but i need samsung to support my phone and now its been a lot of new fw's and nothing to NEE...
I just run the Polish version, works fine, except it's a battery hog.
i'm wondering why it takes 3-4 month to roll-out update for all regions !!!
really why ?
mehdi.moha said:
i'm wondering why it takes 3-4 month to roll-out update for all regions !!!
really why ?
Click to expand...
Click to collapse
We're talking about 1/4 of a YEAR! Weird since the fw is already done and you can install it from other region and everything works.
Downloading it now!
Sent from my SM-N9005
Juan123 said:
I am starting this thread so us Nordic users can discuss anything about the latest update 4.4 once it is out.
Hopefully we will see it soon!
Been waiting way too long
Update:
Nordic 4.4 is now available!
Sent from my SM-N9005
Click to expand...
Click to collapse
Sent from my SM-N9005
Juan123 said:
Downloading it now!
Click to expand...
Click to collapse
Jay, downloading too. Hope this helps with my battery issues because it can't get any worse than it already is in 4.3.
Ya I hope so too
Sent from my SM-N9005
Just did upgrade via OTA. Now running N9005XXUENC2. Build number KOT49H.N9005XXUENC2. Kernel 3.4.0-636608.
As expected not much have changed. Didn't do factory reset yet, i guess that is recommended? How about all the settings and saved games etc, those should be backed up?
neurocid said:
Just did upgrade via OTA. Now running N9005XXUENC2. Build number KOT49H.N9005XXUENC2. Kernel 3.4.0-636608.
As expected not much have changed. Didn't do factory reset yet, i guess that is recommended? How about all the settings and saved games etc, those should be backed up?
Click to expand...
Click to collapse
You can try going without a reset - if there are no problems then you have no need to wipe the phone. If you have issues or sudden battery drain or something then do a reset. Apps and saved games can be backed up with Titanium Backup if you are rooted or I use Helium which works without root. Not sure if it saves settings - I try to never restore settings if I go to a different version so I haven't tested this.
I'm gonna do a factory reset 3 times as I did after the MJ7 disaster, it really helped with my battery life (not alot but a little).
I could usually squeeze out 6,7 hours of screen time on 10% this pales in comparison to MJ3 but I'll write here once I have some results.
Sent from my SM-N9005
After installing this my AnTuTu Benchmark score went 4000+ points down. Is this supposed to happen?
Does anyone have a faster download link, the one on sammobile is so SLOOWWW
c900712 said:
Does anyone have a faster download link, the one on sammobile is so SLOOWWW
Click to expand...
Click to collapse
do you have the url to Sammobile for nee? i only found the Tre firmware, since i got a account there downloading should be faster. i will upload it to M when i got it.
mega.co.nz/#!TEpCVDqL!iuE6b0Kik81eHg5cqpDOeS3OID0qEU3-oWvbG6e8r2o
Vasastan said:
do you have the url to Sammobile for nee? i only found the Tre firmware, since i got a account there downloading should be faster. i will upload it to M when i got it.
Click to expand...
Click to collapse
http://dl.sammobile.com/OlFZQ1wrLD0...lNBXkNMWA../N9005XXUENC2_N9005NEEENB2_NEE.zip
KitKat photo editor
Just updated to 4.4.2 this morning and was disappointed that the Nexus photo editor wasn't in this update. Not sure if this has been discussed somewhere but is there a way to "easily" get it on my phone without rooting or anything?
Modem + NON-HILOS
Extract rar/zip file
Flash with Odin. You may need to flash it twice.
Enjoy.
OA1 modem:
https://mega.nz/#!L45klT7S!ZmpO-NwadNrYgMsYgd0kRpCmneLLeLBSturkt-a-rFI
NK1 modem:
https://mega.co.nz/#!HlJXkSIK!RB93ncfZFBACZYfqc72wz-9FWx4lFg30d4sPcWvJ0NI
NI2 modem:
https://mega.co.nz/#!i4BFBTIb!14g7fp8lph0j5T4sfz1AHSChuZqTFUz8V00se0Fqn7s
Where did this come from? Anyone test on Rogers?
cantenna said:
Where did this come from? Anyone test on Rogers?
Click to expand...
Click to collapse
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Yes, I'm on NI1 as well, thanks
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
ma678 said:
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
There all multi-csc aren't they? Just asking cause its the first time I heard this term.
So it should work with Rogers. I'll give it a try later this afternoon
cantenna said:
There all multi-csc aren't they? Just asking cause its the first time I heard this term.
So it should work with Rogers. I'll give it a try later this afternoon
Click to expand...
Click to collapse
The modem definitely works with Rogers.
The NI2 rom has all Canadian GSM carriers and quite a few more carriers. By default it flashes Bell. I tried Telus and then stick with Fido.
Sent from my SGH-I337M using Tapatalk
Confirmed Working fine here with MDJ & NH1 bootloader Rogers network
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
Bootloader = VLUFNE1
Modem = VLUFNI2
Non-HILOS = VLUFNI2
Working well, no improvements compared to UMUFNI1 or UMUFNE3. The dBm readings are about the same, but at least this is the official Canadian modem.
ma678 said:
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
My friend how you changed the CSC ???
Dial *#272*imei# on your keypad.
omek07 said:
My friend how you changed the CSC ???
Click to expand...
Click to collapse
if not better is it stable-er?
Im on a 337m that I picked up used and was on ne1.
So anyway I gave it a few days on stock- cell n data worked fine. Im actually getting up to 15 mbps on wind, wow. Tried goldfinger rom by ibastid and great but lacking some stuff I was used to like the tw refusing to rotate. Tried hyperdrive and wow feature rich. but I lose signal every now n then or upon a reboot. Like randomly once a day or so, toggling flight mode gets it back instantly. But modem issue yall think? Dont know if there is something I can tweak in ktoonzez
Loosing signal every so often, that's because your on wind network. I used to be o. Wind network as well and had this issue. Went away after switching to Rogers.
Rogers/Fido firmware was also updated last night. Basically they are all the same, though.
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
cantenna said:
Where did this come from? Anyone test on Rogers?
Click to expand...
Click to collapse
cantenna said:
Loosing signal every so often, that's because your on wind network. I used to be o. Wind network as well and had this issue. Went away after switching to Rogers.
Click to expand...
Click to collapse
Can not enable WiFi
I have rooted Fido Samsung Galaxy S4. Today I have updated it to NI2 firmware using Kies3.
When update finished, my modem was still showing NE1 and WiFi did not work.
I flashed NI2 model file (from the first post) using Odin.
Now both Firmware and baseband version show NI2, however WiFi is still disabled and I can not get it to work.
Already tried to to reflash NI2 modem with Odin for a few times, but it does not solve the problem.
Could someone please help me to solve this issue ?
Thanks!
Why would u update using kies?
fmark said:
I have rooted Fido Samsung Galaxy S4. Today I have updated it to NI2 firmware using Kies3.
When update finished, my modem was still showing NE1 and WiFi did not work.
I flashed NI2 model file (from the first post) using Odin.
Now both Firmware and baseband version show NI2, however WiFi is still disabled and I can not get it to work.
Already tried to to reflash NI2 modem with Odin for a few times, but it does not solve the problem.
Could someone please help me to solve this issue ?
Thanks!
Click to expand...
Click to collapse
I had the same problem after upgrade. Here is what I did.
Odin the full rom. Downgrade modem following the website:
http://www.w0lfdroid.com/2014/09/To...-and-Note3-Android-4.4.2-NF-or-Later.html?m=1
Root phone with TowelRoot. Install SuperSu and twrp recovery. Odin back NI2 modem. Install a customized kernel. I tested Adam and Alucard working on wifi.
Note: you will probably have to turn off Smart Connect to keep wifi staying. Try it first before you start to Odin the stock firmware.
Good luck.
Sent from my SGH-I337M using Tapatalk
Thanks! In the end I just backed everything up with Titanium and did hard reset and then restore. Now WiFi works.
anyone got changelog for new update
nabbasi said:
anyone got changelog for new update
Click to expand...
Click to collapse
All I've read online is that Google Play Services have been updated. And this Play Services update really does a number on the battery life. I haven't installed it yet, can't seem to find much info about this update.
I have the 32Gb LTE version with an AT&T Sim installed (5gb data plan), Wifi on as well.
I was at the latest KitKat update and noticed that lollipop had been released a few days ago. Every time I goto about tablet / system updates it says its up to date, but still on version 4.4.2. Bought the tablet new from Newegg when it came out. Never had any problems with updates, even using TowelRoot in between updates.
I have reset back to factory and still am not having any luck getting an OTA update, No error messages it just returns with an already up to date message. Any ideas?
Download it and flash it manually.
It's at&fee causing you the strife
Sent from my SHIELD Tablet using Tapatalk
SEscobedo said:
Download it and flash it manually.
Click to expand...
Click to collapse
I've looked, can't find any roms for the LTE version, only WiFi
jb0nd38372 said:
I've looked, can't find any roms for the LTE version, only WiFi
Click to expand...
Click to collapse
Same here and mine says I'm up to date. hmm.
After looking around .. it seems that AT&T hasn't "approved" the LTE version and since the damn thing ships with an AT&T sim card ... yeah .. doesn't matter that it works with TMO (which I'm using) ... we're not getting it for a bit for the 32GB LTE version.
http://www.reddit.com/r/Android/comments/2mpi31/nvidia_shield_tablet_32_gb_lte_us_not_getting/
The LTE version is linked to in the following post/thread - be sure to read it through and it's at your own risk: http://forum.xda-developers.com/showthread.php?p=56856907
Sent from my SGH-I337M using XDA Free mobile app
THANK YOU!!!!!
An Droid said:
The LTE version is linked to in the following post/thread - be sure to read it through and it's at your own risk: http://forum.xda-developers.com/showthread.php?p=56856907
Sent from my SGH-I337M using XDA Free mobile app
Click to expand...
Click to collapse
Thank you VERY MUCH!!!!!
Also I'd like to redirect anyone to THIS LINK as it has full instructions to do it with stock recovery (Need an SD card though)
aergern said:
Same here and mine says I'm up to date. hmm.
After looking around .. it seems that AT&T hasn't "approved" the LTE version and since the damn thing ships with an AT&T sim card ... yeah .. doesn't matter that it works with TMO (which I'm using) ... we're not getting it for a bit for the 32GB LTE version.
http://www.reddit.com/r/Android/comments/2mpi31/nvidia_shield_tablet_32_gb_lte_us_not_getting/
Click to expand...
Click to collapse
The link that was posted above does indeed work with AT&T and i'm getting impressive LTE transfer rates. Only had Lollipop installed for 45 minuets but I have not seen any issues with it. Much faster than Jelly bean.
jb0nd38372 said:
The link that was posted above does indeed work with AT&T and i'm getting impressive LTE transfer rates. Only had Lollipop installed for 45 minuets but I have not seen any issues with it. Much faster than Jelly bean.
Click to expand...
Click to collapse
Yep. It's working well on mine as well and I'm getting 40mb/13mb on TMO's LTE. Really nice. I just forgot that I'd rooted mine with a GUI tool instead of the normal way so my bootloader was still locked ... when all was said and done ... fresh start.
Ah well .. a quite Titanium restore and I was back in black.