Database Info

Sure fire way to stop background programs from running?

I'm attempting to try to increase my battery life so it lasts longer than 12 hours (~13 seems to be my limit). (I'll admit I'm a bit jealous of those who can run the phone 24+ hours) Though it's somewhat painful, I'm shutting down most the programs I have running in the background. However there seems to be a number that like to restart even after I think I've disabled their startup, widgets, notifications, etc.
Is there a way to make sure programs that you install don't run? Or at least don't launch during start up? Perhaps something like msconfig in windows?
Thanks.

Raleran said:
I'm attempting to try to increase my battery life so it lasts longer than 12 hours (~13 seems to be my limit). (I'll admit I'm a bit jealous of those who can run the phone 24+ hours) Though it's somewhat painful, I'm shutting down most the programs I have running in the background. However there seems to be a number that like to restart even after I think I've disabled their startup, widgets, notifications, etc.
Is there a way to make sure programs that you install don't run? Or at least don't launch during start up? Perhaps something like msconfig in windows?
Thanks.
Click to expand...
Click to collapse
Killing background tasks will only decrease your battery life. When an application goes to the background, it sits in memory but does NOT consume any CPU power. since the memory is in solid state, it requires no power to stay in that state. By constantly killing background applications, it will need to start up, reinitialize, and consume more power then if you had just left it alone. Also, long term performance will be negatively affected, even if you do expereince a small short term performance gain. the Android OS is designed at the core level to have applications behave this way, and modifying that behavior will make for a worse experience.

asrrin29 said:
Killing background tasks will only decrease your battery life. When an application goes to the background, it sits in memory but does NOT consume any CPU power. since the memory is in solid state, it requires no power to stay in that state. By constantly killing background applications, it will need to start up, reinitialize, and consume more power then if you had just left it alone. Also, long term performance will be negatively affected, even if you do expereince a small short term performance gain. the Android OS is designed at the core level to have applications behave this way, and modifying that behavior will make for a worse experience.
Click to expand...
Click to collapse
Eh, this is the first I've heard this. I don't remember reading this in the various battery optimization guides.
Still is there a was to stop things short of uninstalling? For example, I want to stop using the Yahoo Mail app but don't want to install yet. I went through all the options I could to disable checking/notifications, etc but it still pops back into memory constantly.

I assume youve tried the obvious, turn off WiFi (3G) and screen when not actively using it?! Those are the big batt.-eaters
Sent from my HTC Magic using XDA App

asrrin29 said:
Killing background tasks will only decrease your battery life. When an application goes to the background, it sits in memory but does NOT consume any CPU power. since the memory is in solid state, it requires no power to stay in that state. By constantly killing background applications, it will need to start up, reinitialize, and consume more power then if you had just left it alone. Also, long term performance will be negatively affected, even if you do expereince a small short term performance gain. the Android OS is designed at the core level to have applications behave this way, and modifying that behavior will make for a worse experience.
Click to expand...
Click to collapse
Documentation? As far as I have read an application does not go into any type of dehydrated state when running in the background / minimized. It can do anything it wants including using CPU cycles.
I do agree that most applications do not need to be killed with a task killer but leaving 3D games (for example) running in the background could hurt your battery. Also not all applications are progammed with ther same fore thought and skill level.
I get about 33% more runtime out of my battery using a task killer to kill specific applications that I know I do not want running in the background.

Streaker said:
I assume youve tried the obvious, turn off WiFi (3G) and screen when not actively using it?! Those are the big batt.-eaters
Click to expand...
Click to collapse
I leave wifi on since I'm usually in range. It's more efficient than 3g right? I alway sleep the device when I'm done. I still have huge percentages on the screen when looking at the battery usage. I'm trying a completely black screen now.

Mainly your widgets and icons and stuff still cover large portions of it, so: a black screen will help, not but alot.
Also, to keep items in RAM, to the second poster... What do you think is keeping those items in RAM?
Ummm... It's the CPU.
Task Killers won't help you on RAM usage at all (Because Android will automatically shuffle them out if it has to, or so I've read... I've yet to hit max memory). Task Killers DO help you as far as battery use goes, though... Keeping the browser killed if you aren't using it, etc.

Bjd223 said:
Documentation? As far as I have read an application does not go into any type of dehydrated state when running in the background / minimized. It can do anything it wants including using CPU cycles.
I do agree that most applications do not need to be killed with a task killer but leaving 3D games (for example) running in the background could hurt your battery. Also not all applications are progammed with ther same fore thought and skill level.
I get about 33% more runtime out of my battery using a task killer to kill specific applications that I know I do not want running in the background.
Click to expand...
Click to collapse
I should clarify. I guess the term I meant to use is "suspended." If a program is actively "running" in the background, it will use CPU cycles. But if you simply stopped using a program, say for example the xda app, and returned to your homescreen, the application stays "suspended" in the background and consumes no CPU cycles until you go back to it. Now services that are updating, such as email or SMS, will use CPU cycles in the background because they are still actively running. But if you want to conserve battery life you can simply disable the notifications from most of these programs.

asrrin29 said:
I should clarify. I guess the term I meant to use is "suspended." If a program is actively "running" in the background, it will use CPU cycles. But if you simply stopped using a program, say for example the xda app, and returned to your homescreen, the application stays "suspended" in the background and consumes no CPU cycles until you go back to it. Now services that are updating, such as email or SMS, will use CPU cycles in the background because they are still actively running. But if you want to conserve battery life you can simply disable the notifications from most of these programs.
Click to expand...
Click to collapse
The app itself at that point may not be but the Android OS still does to maintain that suspended state.

I have some applications I rarely use or even some that I've never used but may want to in the future. I see absolutely no benefit in keeping these applications in the background. Further more, I've noticed a signficant drain on the battery when extra applications are running in the background. I'm sure it's not all of them, but I've yet to discover who exactly the culpit is. Right now I suspect it's the NPR app, perhaps due to data use?
The point is, there are perfectly good reasons to keep some apps in the background, and perfectly good reasons to kill others - or perferrably not have them start up at all unless I do it myself. Could be due to data usage (especially if you do not have unlimited data), could be due to concerns about excessive cpu usage. There really should be a clear method in which you can stop applications from opening on their own.

You can use the program "Autostarts" to keep applications from starting at startup. With it you can also prevent things from launching under a number of other situations. That might be what you are looking for. Just do a google search for the APK as I don't think it is in the market.
Sent from my SAMSUNG-SGH-I897 using XDA App

Shuggins said:
You can use the program "Autostarts" to keep applications from starting at startup. With it you can also prevent things from launching under a number of other situations. That might be what you are looking for. Just do a google search for the APK as I don't think it is in the market.
Wouldn't tasker also help?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Sent from my AOSP on XDANDROID MSM using XDA App

To me, it's not a matter of "task killer or not", but rather when and where to use one. And I think it's simple: Don't bother, unless you suspect a specific app is doing something you don't want it to do in the background. Then, just kill that specific app and leave everything else alone. A Task manager that shows CPU% for each process can be handy for this as well.
I generally try to avoid killing tasks, but one night I had 50% battery on my phone and after about 2 hours or so I took it out of my pocket to make a phone call, and it was very hot and had about 12% of batter left -- something was running wild that shouldn't have been (I think it was Pandora, even though it was not currently playing any music!) So, background apps do occasionally run out of control, and you do need to occasionally kill them, but do it on an "as needed" basis.

Raleran said:
I'm attempting to try to increase my battery life so it lasts longer than 12 hours (~13 seems to be my limit). (I'll admit I'm a bit jealous of those who can run the phone 24+ hours) Though it's somewhat painful, I'm shutting down most the programs I have running in the background.
Click to expand...
Click to collapse
Unless the background process is syncing data, it won't eat your battery. So instead of wasting your time, you should focus on other energy hogs. Things like screen brightness, bluetooth, wifi, and gps.

Shuggins said:
You can use the program "Autostarts" to keep applications from starting at startup. With it you can also prevent things from launching under a number of other situations. That might be what you are looking for. Just do a google search for the APK as I don't think it is in the market.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I installed Advanced Task Killer from the Market. It lets you kill all running applications including itself.
durrence

jsmith8858 said:
To me, it's not a matter of "task killer or not", but rather when and where to use one. And I think it's simple: Don't bother, unless you suspect a specific app is doing something you don't want it to do in the background. Then, just kill that specific app and leave everything else alone. A Task manager that shows CPU% for each process can be handy for this as well.
I generally try to avoid killing tasks, but one night I had 50% battery on my phone and after about 2 hours or so I took it out of my pocket to make a phone call, and it was very hot and had about 12% of batter left -- something was running wild that shouldn't have been (I think it was Pandora, even though it was not currently playing any music!) So, background apps do occasionally run out of control, and you do need to occasionally kill them, but do it on an "as needed" basis.
Click to expand...
Click to collapse
Or an auto-killer would've killed it before it killed your battery by 38% lol

Task Killings are bad, mmmkay...

Slightly off topic:
To help conserve battery power,
Use an all black desktop background since the black areas dont use battery power.

Hmm, people in this thread have said a few things that I haven't heard or seen much before. Specifically that killing apps could decrease battery life. When I first downloaded advanced task killer I tended to kill most things. I slowly backed off and now I've been watching what launches and what tends to come back and not kill those (mail apps, widgets, performance watchers, etc). The second is that not having a black background doesn't necessarily improve battery life. Makes sense considering I have icons everywhere on my screen.
@Shuggins - Thank you! That's exactly what I was looking for. I've downloaded it but now I have to, er charge my battery a bit before I can take a close look at it.
@jsmith8858 - Are you running setCPU? A couple days ago I noticed my battery running pretty hot. I stopped using setCPU and the battery cooled down a lot. I've used setCPU since them without the heat issue so I'm not sure what was going on.
Well during todays iteration I ran for about 12 hours (typical). I had a couple short phone calls, 2 email accounts syncing as well as other bg syncing processes. I did eat up 30% in an hour messing with a game. I'd probably have 13-14 hours if I didn't play anything (but if I didn't what's the point of the phone . Still, as much as I love it the screen is killing me. Guess there's nothing to do about it though (usually brightness is all the way down, turn it off when I'm not using it, using a darker background). I didn't kill any of my background processes today. I'm going to set up that Autostarts program and start auto-killing various programs tomorrow.

You can try using autokiller and art it to extreme, but I don't recommend this
Sent from my HTC Dream using XDA App

Guide to Maximizing Battery Life w/o Disabling Half Your Phones Features

*Disclaimer* This is all from a personal experience and testing/research from a long time android user, what I have discovered over time and has helped me and some friends. This will work whether your rooted OR not. I kept it as basic as I can so everyone can benefit. If you dont like what you read and disagree, or want to add something PM me, Ill change/add and give credit to you. Hopefully, this can grow with the community.
*Rooted Section Will be Added*
*When I charge my battery I usually drain it all the way down or as much as i can (around 20% left) then charge plugged in till green, then power down and charge for another hour or so. Not sure if this matters or not but seems to help me out try it!*
This guide will help you if your rooted or non-rooted, all the apps I talk about I honestly have no ties to the devs. I don't use any SUPER AWESOME AMAZING BATTERY SAVER 5000 apps or anything like that. Those mostly just turn ur radios off and on and kill apps in the background. In my experience a lot of them cause syncing issues with my e-mail and other notifications. I like to receive my information instantly not have an app waiting for me to turn my screen on to check for updates.
About my personal setup: Basically, I want my phone to last me all day but still perform well with a heavy use, WITHOUT needing to constantly change settings to save battery. With what I have here Im able to keep my Sensation running for a full day of moderate-heavy use (7:30am to around 10pm) with its STOCK battery (Did damn well on my Evo 4G too). Days of very minor use Ive gone into the second day with 60% + battery. Yes, I use all my home screens and have a good amount of widgets, I love sense and its widgets. I play games, surf the web, do a lot of texting, listen to a lot of music, decent amount of fbing and email, usually take a few pictures a day. Half my day is wifi/other is mobile data.
Here goes the real basics, mostly common sense here not trying to insult anyone. Feel free to browse thru it quick (green text) if your not totally new to the android scene, whats after it will be a good read for noobs and vets.
*I use the power control widget, make getting to a lot of settings quicker. Why waste battery digging thru menus?*
Basics:
-Screen brightness: (duh ) these pretty screens eat battery brighter=quicker drain naturally and from my experience leaving it on Auto Brightness kills more battery too. Each time your phone pulls information from the sensor to decide on how bright it should adjust itself too.
-GPS: If GPS is on it should not effect battery unless an app is using it and you see the GPS icon on your notification bar. I noticed a very slight increase in mA discharge when i had it enabled, to be safe leave it off if you dont use it extremely frequently.
Location thru mobile networks: Not to hard on battery. I leave mine on it does add drain but it takes away from my weather widgets updating when Im traveling.
-Bluetooth: Moderate battery drain. I honestly don't use it at all myself but if you do try your best to keep it off when not in use.
-Wifi: Android has gotten a lot better at managing wifi over the past few years. It doesn't drain that bad on battery and it shuts off/on periodically on its own when screen is off depending on whats using it.
Google Back-Up: Takes a little juice here and there no biggie. I dont use it just because I like to fresh install my apps when I try a new rom, run into less problems that way.
2G/3G/4G: This varies phone to phone, the slower speed the better battery life. If you know your not going to be using 4G for a while turn it off. I leave mine on 4G or wifi all day with my sensation. When I had Sprint and my Evo I would leave it off most of the time. Depending on your carrier and how their data works this is a big one. T-Mobile seems to handle well, Sprint and Verizon's 4G Ive seen eat an insane amount of battery.
Sync/Background Data: I lumped them together because sync is pretty much reliant on background data. These kill a lot of your battery in general. It syncs your apps (email, facebook, google data, contacts, etc.), the periodic checks your apps do to check for and download new emails and notifications, using background data (data still transmits when screens off). I always leave these on and still manage great battery life, I like things instant if I wanted to wait Id just wait till i got in front of a PC. Sync and Background data are the settings most battery saving apps control because they really can help your battery if you turn it off. You can control what core apps sync in settings>accounts and sync. Or the power widget that 95% of android phones have has it on there. I recommend minimizing the amount of apps you allow background data with, example: WeatherBug first launch it asks if it can automatically update itself in the background for apps were thats not necessary hit no.
Radio/Airplane Mode: Pretty self explanatory, turns off your connection to your wireless provider. No point in ever turning it off in my eyes, your phones no longer a phone.
What has really helped me with my battery life (non-basics):
There is a lot to be said when it comes down to 2.2+ android phones and whether they need a task killer anymore or not. Since Ive had a lot of android phones and a few now that are 2.2+ Ive done a lot of testing. I usually go about a 2 weeks on one idea or new task killer and keep a close eye on battery drainage using Battery Monitor Widget, free app in the market. It tells you exactly how much of your battery is being drained without killing battery itself. Each phone/rom settles at a different average mA lower the better. In my experience if I can keep my phone anywhere under 100mA when idle im doing good. This held true on both the Evo 4G and my Sensation. Some ASOP roms i could get down to the 30's but for sense under 100mA is good. Keep in mind you will get the occasionally spike here and there its just android and/or apps in the background. You can view the a chart of the battery data in Battery Monitor.
Instead of boring you guys with each task killer Ive used and its results, Ill just get down to what I found out in the end.
Basically, the way android 2.2+ works it really isn't necessary to run a task killer it does a decent job removing apps from memory when you need more memory. But at the same time I found running a task killer periodically (BUT not killing frequently used apps) results in a lower average mA drain leading to overall better battery life.
The best application I have used has to go Automatic Task Killer , trust me Ive used a lot from the top free ones to a few of the more popular paid ones. What this task killer does is kill a selection of apps you allow it too every time your phones screen shuts off and goes idle. On Automatic Task Killer's first boot your shown a screen of every application that could at some point run in the background on your phone. This part sucks a little bit but it is worth it, you need to select which of the apps you want to allow it to kill automatically. It does not kill foreground apps the ones you currently have open on the screen aka a browser or a game. Example your playing NFS: Shift and your boss walks by so you quickly pause and hit the power button turning off the screen, next time you turn the screen on it will kill all other allowed background apps but your game will still be up front and center.
Now the trick is to go thru and set it to kill apps you know your phone won't automatically just restart or you don't use 90% of the time. So don't select things like Dialer, Contacts, Clock, Calendar, Messages or apps you constantly use/check such as a third party SMS app or your main E-Mail Client or third party keyboards (various by person and what you use most). Letting the app automatically kill those is just going to lead to worse battery life because your phone will just restart it each time leading to more CPU cycles (not what you want and part of the reason some consider task killers bad things).
Also, when using any task killer and killing the proper apps sense runs smoother, a big deal with sense 3.0.
So hopefully with a little messing around you can get a good setup where your phone lasts you all day without having to constantly keep changing settings and watching your battery life. All while everything stays syncing and instant. Hope this helps!
*ROOT Section (now that we have s-off )
Everything posted above can be done on any rom, rooted or none. There has been a lot of posts on "freezing apps" that you dont need or typically use, which does in fact really help battery life. Since, we (by we i mean sensation users) now have a permanent root this is my tiny second part of the guide for rooted devices.
I dont freeze my apps I prefer them to be gone for good if its something I dont see myself using or its bloat that came with my phone/rom. Since 98% of us will be using custom roms now this usually isnt an issue since most dev's r good at what they do and remove all the bs we dont need or normally use. Still there is some apps we may not want on our phones so for that I use SystemApp Remover . Its a great App for people who dont want to have to worry about going in manually and getting rid of system apps.
Its just basically an Uninstaller that allows you to access any and every app on the phone for you to uninstall (thats y roots needed). For me I just go in an drop the apps I know i wont use. A lot of roms come with carrier add-ons and such, those I normally delete as well as a few HTC sense widgets and apps I see no need for. It will free up space and increase your phones battery life with most things you delete.
Now, be careful. You are prompted upon opening SystemApp Remover that messing in system apps is dangerous and it is. If your not sure what something is DONT touch it, simply do a google search or ask around to see if its safe to remove first.
Re-calibrate Battery: After you flash a new rom or start using a new battery, you should use your recovery (CWM or other) to Wipe Battery Stats. Before you do this make sure your battery is at 100% and has been on the charger for over an hour with the fully charged green led on. This will allow your device to better drain your battery and can really help battery life.
So hopefully with a little messing around you can get a good setup where your phone lasts you all day without having to constantly keep changing settings and watching your battery life. All while everything stays syncing and instant. Hope this helps!
Thanks to people who have contributed:
-JadeSoturi

thanks for sharing the experience
i'm trying Automatic Task Killer

devine might said:
thanks for sharing the experience
i'm trying Automatic Task Killer
Click to expand...
Click to collapse
no problem. let me kno how it goes for you

very good info! would also help if you specify which versions of android.....

Thanks for the info, hope it will increase my battery life to last a day

Airfaire said:
very good info! would also help if you specify which versions of android.....
Click to expand...
Click to collapse
im on my sensation so 2.3.3. Been getting a lot of hate on the sensation forums since task killers are officially deemed no longer needed, but this method really helps me with battery life hoping itd help some of u too

Watchdog> then any task killer
ADR6300

Hmm, ill try auto task killer as well, tried a few others.

I use JuiceDefender, I like it. It manages my connectivity pretty well and it does help.

This is excellent, many thanks. As a converted WM 6.5 user I have to say, I am enjoying android considerably more and I prefer it to the Metro interface of WP7. It's nice to know the little tricks to get the most out of it. Thanks again. ^_^

DarkSwanKnight said:
I use JuiceDefender, I like it. It manages my connectivity pretty well and it does help.
Click to expand...
Click to collapse
same here, JD works pretty good

TastyTorge said:
same here, JD works pretty good
Click to expand...
Click to collapse
Worth getting the full one or will the free version do?
Sent from my HTC HD2 running TyphooN CyanogenMod 7 via XDA Premium App

Thanks
Thanks for the info, and for sharing, i will try the different methods

i havent really bothered with task killers but ive found reducing the brightness and disabling data and sync makes my battery last alot longer. i just re enable when i need them.

also, i downloaded setcpu and added a profile for while the screen is off. that helps alot. the drain is about 5% with the screen off after every 3 or 4 hours.

Very good info thanks

You had me impressed until you mentioned task killers. Absolutely horrible...
Sent from my HTC Sensation 4G

Martin_Toy said:
Worth getting the full one or will the free version do?
Click to expand...
Click to collapse
Full version is much better.
It's killer app indeed. I think many of it's features should be natively included in android.
Options like "Turn off 3G/EDGE when connected to Wi-Fi", "Turn off all radios when screen is off", "Turn off Wi-Fi after x minutes if it doesn't connect to a network", "Set screen brightess to minimal when battery is low", etc....it wouldn't be that hard to implement and battery life, perhaps most criticized aspect of Android, would improve immensely.
fpu

floating_point_unit said:
Full version is much better.
It's killer app indeed. I think many of it's features should be natively included in android.
Options like "Turn off 3G/EDGE when connected to Wi-Fi", "Turn off all radios when screen is off", "Turn off Wi-Fi after x minutes if it doesn't connect to a network", "Set screen brightess to minimal when battery is low", etc....it wouldn't be that hard to implement and battery life, perhaps most criticized aspect of Android, would improve immensely.
fpu
Click to expand...
Click to collapse
Your mobile network DOES turn off when connected to wifi, and if all radios turned off when the screen went off, how would you ever get calls or emails with the phone in your pocket? The wifi after x minutes would be a nice feature, but I don't like things touching my screen brightness.

Thank you for your information.

[GUIDE] The Total Newb's Guide to Wakelocks

PARTIAL WAKELOCKS
PWLs are a different beast. These are almost all caused by an app (with a couple of notable exceptions). For that reason, I won't go in-depth on too many of them, as the solution is usually to delete the app causing them. There are a few notable ones, and a few apps that merit mention.
AudioOut_1, AudioOut_2: This is an evil leech of a wakelock that will drain you dry if given the chance. For being such a pain in the app, it's surprisingly easy to get rid of. This wakelock is created whenever the phone's speaker plays a sound. With 99% of sounds, it goes away almost instantly. With keypad sounds, however, it doesn't go away so quickly, and it will sit there draining your battery for as long as it goes unnoticed.
To fix: Open Settings, then select sound. Turn off keytone sounds, touch sounds, screen lock sounds and vibrate on screen tap. It'll take some getting used to, but the extra battery you'll coax out just by solving this ridiculously simple problem is more than worth it. See DoctorQMM's post (#5), linked at the end of this one, for info on additional causes of this wakelock and how to fix them.
ConnectivityService: This will appear whenever your phone is trying to connect to a mobile data network. Excessive wakelocking here suggests that your phone is having a hard time finding a network, and an even harder time staying on it.
To fix: Test out different radios and see if one's better in your area. I personally have to use UCLF5, as UCLF6 is a mess out where I live. If you're able to control your radio bands and you don't live in an LTE area, setting your phone to hunt for GSM/HSPA connections only can save you a little bit of juice here. Not much, but every drop counts, and if you're not using LTE anyway...
AlarmManager: This isn't a wakelock unto itself so much as it's a compilation of app alarms and the time they held the device awake for. Seeing the wakelock alone doesn't tell you much, but here's where one of those features of BBS that I said we'd be using comes in.
To fix: Open BBS. Tap the menu button, then "More", then "Raw Alarms". That will show you which apps are waking up your phone, and how often they're doing so. Google will have a ton of wake-ups, but they're mostly innocuous. We'll discuss some of Google's problem apps later. Email clients will also have a ton of alarms. If anything else looks out of whack, though, first check the app settings to see how often it's refreshing. If the app is set to refresh every hour but it's set off 400 alarms in the last 30 minutes, get rid of that sucker and email the dev. You can't eliminate this wakelock, and it's constantly my #1 PWL at this point, but you can minimize it.
A special note about this wakelock: You will get all kinds of crazy numbers out of this wakelock. You may see as high as 20m on a 1h30m stretch of battery. You will want to kill this wakelock, and kill it with fire. Don't, I say, don't do it! Look at your deep sleep time vs. time awake - screen on. Odds are, it's far less than the 20m that this wakelock is showing. You may have a time awake - screen on time of less than 3 minutes. What's the reason for the discrepancy? Well, it's well-known that there are wakelocks out there, PWLs especially, that will hold your device awake even if it's already been woken up: i.e., you'll have a PWL registering while the screen is on. Alarms are certainly among those that do so, as they are designed to wake your device up, so that's the first thing they'll try and do. I suspect the remainder of the discrepancy is caused by the way BBS reports. I suspect every alarm is tallied differently, so that if you have two alarms go off at the same time and last for 2 minutes each, BBS will register 4m of wakelock even though it was only held awake for 2m. Make sense? It doesn't for me either, but that's the best pair of explanations I've got, and the numbers seem to back it up.
MediaScannerService: This is a wakelock created by the system as it scans your device for music, movies, pictures, etc. Once in a while, it will randomly get hung up and hold the phone at 384 MHz for...well...until you notice and do something about it. Like AudioOut_1, this is a heavy-drain wakelock. Luckily, like AudioOut_1, it's almost always easy to fix. A note about this wakelock: it's been shown to be an occasional, but serious, problem on Jellybean ROMs. We're still not entirely sure why, let alone how to solve it permanently. That said, haloeight has been able to beat it into submission on his phone.
To fix: Reboot. Ninety-nine times or so out of a hundred, this solves the problem. If the problem persists, go to Settings -> Applications -> Running then tap on "Show cached processes". Find the Media process and stop it manually to kill the wakelock. That's a short-term fix, though, as a persistent wakelock from this process most likely means you have a corrupt media file somewhere on your phone--and there are a lot of sounds, movies and images on your phone. This is one of the few wakelocks that, if it's a regular problem, justifies considering a full wipe and clean reinstall. That's not because it's doing any kind of damage to your phone, but more because sifting through every single media file on your phone to find the culprit isn't really a practical solution. If you've got a persistent wakelock here on a JB ROM, try haloeight's approach above.
SyncLoopWakeLock: This is exactly what it sounds like; your phone is being held awake while apps sync. There are two possible causes for this: apps syncing (duh) and a bad data connection.
To fix: Open BBS. Tap the menu button, then "More", then "Raw Network Stats". This will show you which apps are using the most data, and help you narrow down possible culprits. Once you've done so, check those app settings and make sure they're not set to constantly push notifications, refresh every five minutes or anything dumb like that. If they're set correctly and still holding sync open that long, try downloading the Speed Test app off of the Play Store and test your phone's connection. If your connection is on the slow side, it's possible that the apps are struggling to sync because of your bad data connection. Try flashing different radios to see if that solves it. If the troublesome apps remain so after you've found a better radio, it's best to just delete or freeze them.
ActivityManager family: This is a harmless wakelock. The typical cause is not exiting out of apps fully before turning the screen off.
To fix: Don't sweat this one too much. If it's a big issue for you, make sure that you're exiting out of apps fully (i.e., either use the back button to exit the app or FC it in Task Manager) before turning the screen off. Credit to the XDA Wiki on this one, as this is one of the PWLs I wasn't able to figure out for myself simply because I hardly ever saw it. I use the back key to exit apps.
GTALK_ASYNC_CONN family: Despite its name, this wakelock doesn't seem to be directly related to Google Talk. How do I know? I haven't had Google Talk on this phone in over a month, but the wakelock still pops up from time to time. This wakelock also seems to be related to a poor wifi connection, so keep an eye on that as well. These wakelocks can be absolute destroyers of your battery if given the chance, and unfortunately, there's no known root cause for them, and no reliable way of eliminating them.
To fix: These wakelocks will often disappear within a minute or so of generating. If one becomes persistent, check your wifi/data connection and make sure it's good. If it persists, reboot into recovery and wipe cache and Dalvik ASAFP. That solves the problem temporarily, but it will reoccur. Thanks, Google.
NetworkLocationLocator: What a lovely name for such a lovely wakelock. It's a minor annoyance usually, nothing more. If this one is persistent, it's because you're in an area with crappy cell coverage and very few Google-mapped Wifi networks.
To fix: Why, exactly, are you leaving Network Location on all the time anyway?
NetworkLocationCallbackRunner: Thanks to clankfu and mw86 to pointing this one out, and a huge thanks to promiseofcake for finding the solution. This is the first wakelock published here that's specific to a phone other than the Skyrocket; it's an S3 issue. Hooray, we've gone global! NetworkLocationCallbackRunner is another wakelock caused by that most wonderful of apps, Google Maps. If you're still using it, seriously, why?
To fix: Upon turning on your phone, don't open Google Maps or anything else that utilizes Google location data. Or, you know, you could just uninstall Google Maps and use an alternative program...details below.
show keyguard: This is a new one for me. It had always been there, but since switching ROMs, it's really started to show up. Not in massive quantities, but enough to make me scratch my head. I've already established that setting your lockscreen to not show user info, weather or calendar data will significantly reduce this. I'll play around with adding those back in more, and having sliders on your default lockscreen won't do much damage either. Still, the more people who've goofed around with this one, the better, as it makes this entry all the more accurate.
To fix: I'm testing several possibilities now, but the one that's worked best so far is turning calendar, weather and user info off. It seems that having those on causes the lockscreen to wake the phone to refresh itself, which creates the wakelock. Judging by my recent experience, this seems to be a pretty big leech.
Chekin Service: Thanks to epapsiou for finding this one and confirming my guess on it. Getting tough to test without my Skyrocket being used as a phone anymore. This wakelock, while a Google Services process, seems to be caused by Facebook. That kind of confirms my theory that Facebook "borrows" Google services.
To fix: Uninstall Facebook and use an alternative app, or just access Facebook through your mobile browser of choice.
SCREEN_FROZEN: Uh oh.
To fix: If this is high on your list, you've got bigger problems than a wakelock.
PWL OFFENDING APPS
We're almost done, I promise!
Down here, I'm going to list off for you apps that will cause you severe PWL migraines, and what to do about them.
A note when uninstalling Google built-ins: Google built-ins are often system packages, and deleting them can have unpredictable results. I highly recommend freezing them in Titanium Backup for several days to see how the phone runs before uninstalling them through there as well. Deleting system processes is inherently risky, and I assume no responsibility for your own decisions.
Facebook: Any social networking app will want to sync as often as it can, but you can overrule that by setting notification intervals. Thing is, Facebook doesn't respect those intervals, and wakes up the device for data exchanges pretty constantly (even though your news feed may only update every hour or so when you want it to). This app is no better than bloat, and should be treated as such when you clean house.
Alternative App: Friendcaster and Fast are both great alternatives that let you set how often the app wakes up, but I've taken to just accessing m.facebook.com through the browser of my choice lately.
Gmail: A running theme here will be that if there's a non-Google equivalent to a Google app, you should probably kill the Google and download the alternative. Gmail is an alarm fiend, and one of the main offenders if you have an excessive SyncLoopWakeLock problem.
Alternative App: How many email clients are out there? I've had the best luck with the stock Email app, but K-9, Kaiten, MailDroid, even Enhanced Email and Touchdown for the power users are all great alternatives. Speaking of which...
Whatever email client you're using: Email clients will always be high up on the list of alarms, and that's by their nature. Keep an eye with raw network stats on how long they're connected for, and don't be afraid to experiment. I tried K-9, Kaiten and MailDroid before settling back on the stock Email app as the one that gave me the best balance of battery life and necessary features.
Alternative Apps: Download and try out different clients until you find the one that works for you. Nothing ventured, nothing gained, right?
Google Latitude: Latitude is a tracking service. As such, it tracks you. Beyond the creepiness aspect of that, it holds your phone awake pretty often while doing so. Kill it. Kill it with fire.
Alternative App: Personally, I'm not into the whole stalking thing, but I've heard that Glympse works quite well.
Google Maps: Colossal waste of space and battery. You can do better. An important note on Google Maps: this app will still wake your device up even after being frozen in Titanium Backup. I don't know how it happens, but it does. To truly solve the alarms from Google Maps, you have no choice but to uninstall it. Do so at your own risk.
Alternative Apps: I'm a fan of Waze for navigation and MapQuest for a Google Maps-ish browseable interface. OSMAnd is also a great alternative, but it uses a ton of internal memory because of its offline nature. If you really love Google Maps, reinstalling it from the Play Store as a user app can reduce those wakelocks dramatically.
Google Play Music & Movies: Updates itself constantly and wakelocks. Even if you freeze it, it still somehow manages to tell you that there's an update available. It's the Google zombie.
Alternative App: There are literally 100+ music and/or movie players out there. I'm sure you can find one that works for you. I'm a big fan of RocketPlayer for music, and I just use the stock video app more often than not.
JuiceDefender: What's that you say? JD sets off tons of alarms and holds the device awake for more time than I'd care to discuss, largely because of its data control settings. More harm than good, in my opinion.
Alternative Apps: JuiceDefender's main goal in life is to minimize the amount of time your device is held awake. Therefore, if you've just gone through all this to clear out wakelocks, do you really need another wakelock-prone app to do what you've already done?
Skype: Occasionally, after a call, Skype will wakelock. This is not designed to happen, and is more a glitch in the app than a forced sync. Force-stopping the app and clearing its cache have solved it for me on the rare occasion that I've seen the wakelock occur.
Alternative Apps: No idea. I don't personally consider this a "replace" situation.
World Weather Clock Widget: Do you have this on your phone? Get rid of it. I installed it as an alternative to SiMi Clock Widget, and while it certainly looks pretty, it ignored my "Update every 3 hours" and tried to update 275 times in that 3 hour window. This drove AlarmManager, GSYNC_ACONN, and NetworkStats off the deep end, and left me at 82% deep sleep with 6% of my battery gone in 3 hours. Kill it. Kill it with flaming nuclear waste.
Alternative Apps: I liked SiMi Clock and wanted to try something new, basically. I'm back to SiMi, but there are literally hundreds of clock widgets out there.
Google Search: If you use Google Now, forget trying to fix this one. GNow is a battery hog, and there's nothing you can do about it without crippling the feature. If you don't use GNow, you can use Greenify to hibernate Google Search and stop the persistent alarms and wakelocks it creates. Greenify is a method I hadn't used in the past, but I've grown to like it for hibernating rogue Google apps.
Alternative Apps: A quick look at the Play Store revealed Quick Search to be the second most-popular option after Google Search. I've run devices without Google Search in the past without issue, but it is usually a system app, so freezing instead of deleting would be a safer option.
That's the bulk of what I've learned from clearing out wakelocks. Remember how, early on, I specified that the search engine of your choice was the third tool? Simple fact is, I haven't installed every app on the planet, so I haven't seen every PWL out there. Because of the way my phone's set up, there are KWLs that I've never seen and never will. If you've got a pesky wakelock that won't go away and it's causing noticeable battery drain, Google (or Bing, or Ask.com, or whatever) is your friend. Good luck, happy hunting, and enjoy the extra battery life you'll get just by spending a few hours over the course of a few days tracking down and killing those wakelocks.
Also, be sure to check out Jrockttu's thread on fixing your battery, as there's tons of great information in there.
Additional in-thread references below. If any of these posts helped you out, please click the link down here and send them a thanks.
DoctorQMM covers com.google.android.apps.maps, an alternate fix for AudioOut_1 and using CPU Spy to help track down wakelocks.
kishke tracks down an alternative cause for the sdio family of wakelocks (including sdio_al) and details it for us here.
polarbearno shares their experience with the mmc_detect family of wakelocks.
haloeight gives us some great steps on how to get rid of the MediaScannerService wakelock on AOKP-based ROMs.
promiseofcake solves the S3-specific NetworkLocationCallbackRunner PWL.

Hi,
I am trying to use smartcharging feature on my crdroid ROM. During the charge, when I reach the preset charging value, it is working well as the phone stop charging. However, at this time, I can see with betterbatterystat that a Kernel Wakelock appears and prohibit the deep sleep mode to be enable. The name of this kernel is c440000.qcom,spmi:qcom,[email protected]:qcom,qpnp,smb5.
As a result, the deep sleep consume a lot of battery and the next morning, when I unplug my phone, I can see a huge battery drain around 2-4% per hours, which is not ideal for a smartcharging feature...
Do you know why this kernel wakelock appears? Is it possible to do something to avoid that?
Thanks

A Comprehensive (but not by any means definitive) Guide to Wakelocks
OP edit, January 12, 2016: To say that I'm proud of what this guide grew into would be an understatement, given that drawing it up was a weekend project for me using my old Galaxy S2 Skyrocket and either ICS or JB.
Take that last little bit into account here. It was done over three years ago on an S2-variant phone using Android 4.0 or 4.1. A lot of the specifics here are no longer going to be 100% correct, even if the principles remain true. If you're a rookie de-wakelocking your phone for the first time ever, please take what you see in the OPs with a grain of salt and ask questions in the thread before making any drastic system changes or mucking around in a terminal emulator.
Thanks for stopping by, and I hope you know a little bit more about your phone when you're done here than you did coming in!
-TJ
----
Wakelocks suck. If you're trying to maximize your battery life, you know this already. Some wakelocks are happy, friendly things, but many are silent leeches, sucking away your battery life while you remain blissfully unaware of what's happening. The goal of this guide is to list some of the more common wakelocks you'll encounter and how to wipe them off of your system. As you encounter ones not on this guide, let me know and I'll add them to the list. For some reference, I typically have light to moderate use of my phone. Before de-wakelocking, I was getting maybe 24 hours on one charge. After de-wakelocking, I was up to 36. Then I bought the Galaxy Nexus Extended battery, and on that battery's third cycle, I went two and a half days on a single charge. Impressive, right?
First off, you have to understand the difference between kernel wakelocks (KWL) and partial wakelocks (PWL). KWLs are wakelocks caused at the kernel or hardware level. Some of these are benign, and some of them are vampires. The only way to solve them is to change how your phone behaves. You'll see examples of that below.
PWLs are wakelocks caused by an app. The solution to these, more often than not, is to freeze (or, in the case of Google apps, uninstall) the offending app. Before you do so, and this is critical, go in via Settings -> Apps, force close the app, and wipe its cache and data. If you don't, you'll almost certainly cause yourself more headaches about 30 seconds after killing the app.
Second, you need to know the tools involved in wakelock hunting. The first is Better Battery Stats. Google "better battery stats XDA" and the dev's post will come up; they give this app away to XDA members. That said, if BBS helps you out, show the dev some love and buy the paid version. It's only $2.89, and the dev will have more than earned it from you by the time you've finished de-wakelocking yourself. The other tools you'll need are (hopefully) this guide, and, of course, the Internet search engine of your choice. I won't cover everything simply because I haven't seen it all.
Two final notes before the guide: do not go wakelock hunting right after installing a new ROM or clean-wipe reinstalling your current one. New ROMs cause the phone to go nuts for a little while, as things decache and little behind-the-scenes tweaks are made. Wait one full battery cycle (100% to 0%, which you're probably doing to calibrate after a clean ROM install anyway) before trying this, or you'll drive yourself nuts. Also, remember that solving one wakelock will often create another, especially early in this process. That's normal and to be expected. God does not hate you, your ROM of choice is not crap, your phone is not glitched, and a clean install while your current ROM is still settling in will only make things worse.
So, how do you track these wakelocks down with BBS? This is a really complicated procedure, so make sure you're with me. First, open BBS. Then, see the dropdown menu at the top that probably says "Other" right now? Tap it, and then you'll see "Kernel Wakelocks" and "Partial Wakelocks" below. That was obscenely difficult, right?
Something to note with BBS: it seems to have a weird "counting" bug. While testing a ROM with BBS, I finally began to question why my PWL time would be considerably higher than my true wakelock time. "True wakelock time," simply put, is time awake - time awake with screen on. If your phone is awake for 45 minutes and the screen is on for 40, you have five minutes of true wakelock time.
So why does BBS say that you have 90 minutes of PWLs when you only have a true wakelock time of 45 minutes? Well, I have two theories to account for that. One, BBS counts wakelocks independently, even if they occur at the same time. For example, if AlarmManager wakes your phone up for two minutes and AudioOut_1 wakes your phone up for 30 seconds during that same time, BBS will register 2m30s of PWLs even though the device was only held awake for 2m total. Now throw 30s of wlan_rx_wake (KWL) in there, and BBS is registering 3 minutes of wakelocks when there were only two. Throw in the notion that you had the screen on for 30 seconds during that time frame, and suddenly you're showing 3m of wakelocks when really there was only 90 seconds of true wakelock time to begin with. BBS has effectively doubled the reported wakelock time, and thrown off your stats. Now, throw in several dozen mini-wakelocks happening at once with the screen on, and you can easily see, say, 6h of PWLs on a 24h run, even if your true wakelock time is only 45m. It seems that Android's battery screen in settings reports this the same way, so my advice to you is to use the true wakelock time when cleaning up and attack KWLs and rogue apps. Some PWLs (AlarmManager) will always be high.
The second theory is that alarms are given a minimum reporting duration; i.e., five seconds per alarm for the sake of demonstration. Now, let's say you have Facebook, Twitter, Google+, LinkedIn, Gmail, Email, News & Weather and BBC News all set to sync every 30 minutes. They'll each set off an alarm at the same time, and suddenly your five seconds of alarm reporting time becomes 40 seconds every half hour. Now, let's say you have 35 alarms going off every half hour (not out of the realm of possibility with Google Services Framework). 35 x 5 = 175 seconds of time awake (in the five seconds per alarm scenario), which is now 350 seconds per hour of wakelocks reported, even if the true wakelock time was only ten seconds. Just something else to keep in mind when attacking PWLs.
One more note on BBS and how it handles KWLs: There is no such thing as a 0-KWL cycle, regardless of what the BBS reporting screen says. If BBS is showing 0 KWLs, tap the menu button, then "More", then "Raw Kernel Wakelocks" to see them. KWLs are required to boot the phone. In essence, the only phone that has 0 KWLs since it was last charged is a phone that hasn't been turned on since its last charge.
There are a couple of other features of BBS that we'll make extensive use of later, but there's one you need to know right now. Tap your phone's menu button to get the BBS menu up. Tap on "More". See the button that says "Set Custom Ref."? You'll need it--you'll need it a lot.
Also, anytime new information about a certain wakelock or wakelock family comes to light elsewhere in the thread, I'll be sharing that information here. If it helps you out, please visit the post that gave us that information and thank the poster. I'll link to each post twice, once in the wakelock description and once at the bottom of the OP, so no excuses about not being able to find it!
Last, but certainly not least: modifying your system in any way, including altering or deleting processes needed to resolve wakelocks, can have unpredictable results. Use caution and make backups of your apps and data, as well as nandroid backups, frequently while finding and eliminating wakelocks. Any modifications you make are done at your own risk, and I assume no responsibility for any damage you may do to your phone while cleaning out wakelocks.
With that said, we'll get started with the KWLs, as they're the trickiest to get rid of. Use the guide below to identify your wakelock, what is causing it, and how to get rid of it.
KWLs in post #2
PWLs in post #3

KERNEL WAKELOCKS
wlan_rx, wlan_rx_wake, wlan_wake: This is a wakelock caused by network traffic. The easy solution would be to just turn off Wifi, but be careful doing so! If an app goes to sync and it sees that Wifi is off, it will search for a mobile data connection (which causes the ConnectivityService wakelock). If it can't find a mobile data connection, it will wait and search again at its next sync interval and/or automatically sync when the phone wakes up. This wakelock can also, deceptively, be caused by the Wifi network itself as it refreshes connections or refreshes IPs.
To fix: This is a tricky little sucker to fix, as there are so many possible causes for it. Airplane mode is a safe bet--syncing apps seem to "respect" airplane mode, whereas if Wifi alone is turned off, they'll just try to find a way around. But then, of course, you lose your ability to talk on the phone. If you're particularly unlucky, your Wifi network itself will be the problem. Mine was--between my wife and I, we have four computers, an iPad, three Androids, a Wii, a PS3 and a Wifi-enabled TV hooked into our home network. The "background noise" caused by all of that would wake my phone up constantly. The solution? I happened to have a spare Wifi router laying around, so I hooked it up, set it on a different channel from my main router, and we now use that network for two of our three smartphones. Period. It's not the easiest fix ever, but wlan_rx_wake is almost completely eliminated (I'm looking now and have 4m45s of it 12h27m into a charge).
PowerManagerService: This is probably your #1 or #2 kernel wakelock, and you'd probably love to get rid of it at all costs, right? Hate to say it, but there's not much that can be done about this one. PowerManagerService is a KWL that serves as a "catch-all" for your PWLs. It's a placeholder, nothing more, nothing less. Don't spend much time worrying about it.
To fix: Reduce PWLs. See below.
deleted_wake_locks: Remember what I said above about force-stopping an app and deleting its cache and data before uninstalling it? This wakelock is why. It's the PowerManagerService for deleted apps. Once the app is gone, the wakelocks it caused suddenly become unknown to the system, so they get lumped in here. This number can also go up as the system "looks for" deleted apps and/or finds more wakelocks associated with them, but not dramatically.
To fix: Make sure to force close apps and wipe their cache and data before deleting. A reboot should eliminate the wakelock entirely. If it's still showing up, wipe phone cache and Dalvik.
sdio_al, sdio_dmux, etc.: This is an annoying wakelock, as there are two potential causes for it. One's easy, and one sucks. The easy one is that you've fallen victim to the charger wakelock. The easiest way to tell is to download Jrockttu's Skyrocket Charger Test App. If your charger shows up as AC Regular Charge, there's your problem. If it's AC Fast Charge or USB Normal Charge, your wakelock could be caused by your SD card. That can be an irritating fix, but the SD card version of this wakelock is typically small enough that it's not worth addressing. Also, a huge thanks to kishke for discovering a third cause for the sdio family of wakelocks: data. It seems that the sdio family is also the wlan wakelock family equivalent for cell data, and can be caused by apps searching for a data connection.
To fix: Check your charger and adjust if needed. To test the cell data possibility, make note of the time on the sdio wakelock, then turn cell data and Wifi off and walk away for an hour. Check it upon your return, and if you have minimal to no sdio wakelock, that was it. Try out some different radios for a better connection, or leave cell data off and stick with Wifi only. If it's the SD card, it's probably not a strong enough wakelock to be worth fixing, but if you want to fix it, you'll have to format your SD card. If formatting doesn't work, format it again, then wipe cache and Dalvik.
alarm_rtc: This is your phone's internal alarm scheduler, set to wake up your phone for sync, push, etc. Closely related to the AlarmManager PWL.
To fix: Check your apps and make sure they're only set to sync when you want them to, not for constant push or stupid-short intervals.
mmc0_detect, mmc1_detect, mmc2_detect: I'll be honest, I have no idea what causes these. Fortunately, they seem to be minimal, so I've never wasted much time worrying about them. polarbearno, however, has had a great deal of experience with this wakelock, and traced the cause of excessive activity here to a faulty SD card.
To fix: Unmount your SD card and pull it, then reboot. Might want to clear cache and Dalvik for good measure. If your problem was caused by a faulty external SD, this should solve it. If your problem was not caused by a faulty external SD, we're back to the original solution of "good question".
vbus_present: This wakelock exists as long as the phone is plugged into a wall charger. This wakelock can also persist if you use an Apple-compatible charger, which registers as "slow USB" charging and will cause the wakelock to hold after you'e unplugged.
To fix: Check your phone. Is there a cord plugged into it? If so, does that cord lead to a source of power? If so, unplug your phone (after it's fully charged, of course). Is the wakelock still there? Plug your phone into an OEM charger for a few seconds, then unplug it to kill the wakelock, then consider ditching that piece of fruit you're charging with. I try to use OEM Samsung chargers as much as possible, as they're designed for the phone (and to not cause persistent wakelocks). Jrockttu has an awesome charger test app, linked to in the OP of his outstanding "fix your battery life" thread.
suspend_backoff: This is a difficult one to nail down. Very difficult. To make a very long story short, this wakelock is caused when your phone wants to sleep, but a running process blocks it from doing so. Typically, this is going to be Wifi. Make sure your Wifi is set to stay awake when the phone sleeps. Otherwise, you risk the Wifi going out of its way to keep the phone from sleeping. This can also, unfortunately, be caused by apps, making it hard to pin down.
To fix: Do the Wifi thing, then reboot into recovery and wipe your caches. If it persists after that, you have no choice but to look at a dmesg output to pin it down. Go into a terminal emulator app and type the following commands, one per line:
su
dmesg >/mnt/sdcard/dmesg.txt
Next, transfer the .txt file onto your computer and open in WordPad or a similar program that automatically cuts line (i.e., no Notepad). Search the document looking for the word "event". You should find a lot of strings that look like this:
eventX-XXXX
Where the X's are all numbers. See those last four numbers after the dash? You should see them repeated again and again. Write them down, then go back into your terminal emulator. They are your process ID (PID). Once there, type:
ps
This will show you all processes that have run since your last boot. If you look at the second column from the left hand side of the page, and you should see a sequence of four numbers. These are listed sequentially, lowest to highest, as you come down the page. Scroll around until you find the sequence of four numbers that matches the one you wrote down. The line below those four numbers is the name of the process causing the wakelock. If it's instantly recognizable as an app, delete the app and see what happens. If it's a hardware thing that can easily be fixed, like Wifi, change your settings to accommodate it. If it's com.android.process.acore, I smell a wipe in your future. If you don't know what the process is, don't go screwing with things to find out. You can brick your phone in terminal emulators. Instead, write it down and Google it. Someone has already written about what this process is and what it does. If it's something you can easily fix, go for it. If it's a deeply-embedded system process, I'd just do a full wipe and clean reinstall.
Remember, terminal emulators can brick your phone if you're not careful. If you use them and something bad happens, or if you wreck your phone trying to fix this or any other wakelock, it is your problem, not mine.
There are a number of other, lesser KWLs that I'm not going to worry about here because you shouldn't worry about them either. You might occasionally see a battery cycle with very low (sub-1%) KWLs, but that's the exception and not at all the rule.
PWLs in post #3

The phone doesn't sleep when its charging, some android thing, that specific wakelock is called vbus_present.

kishke said:
The phone doesn't sleep when its charging, some android thing, that specific wakelock is called vbus_present.
Click to expand...
Click to collapse
That one's in there. It's the last wakelock under KWL.

I know it's there but you wrote: "This is a weird one. I never could quite figure out what causes it, but it seems like it's there as long as the phone's plugged it."
So I just want to clarify it so you could give it a straight explanation. Also you have a small typo there it=in.
It's a great guide!

T.J. Bender: Good topic… good write-up. I can’t agree with you more regarding the frustration level chasing down “greased-pig” wakelocks! The key is to have the right tool-set for analysis. At a minimum, make sure you have CPU Spy, BBS, and a utility which will show you what processes and services are active. Here’s my approach to identify wakelock problems. Again using CPU Spy to check time in Deep Sleep.. and using BBS to check Count of Alarms as well as time (minutes/seconds) of wakelocks:
1) open BBS and set a “Custom Reference” point (basically, this will reset the clock)
2) open CPU Spy and “Reset Timers”
3) turn screen off and let it sit for your predetermined time (i.e., 15min, 30min, 60min, etc)
4) when you reach the first predetermined time checkpoint, turn screen on and first check CPU Spy. How much time did the phone NOT sleep?
5) open BBS and check “Partial Wakelocks” against “Custom Ref Point”. Also check “Alarms” against “Custom Ref Point”.
6) do this every predetermined time (i.e., 15/30/60 min).. and write down results
What I found was very interesting. First I found "com.google.android.apps.maps" Partial Wakelocks were running about 80 times an hour (and preventing Deep Sleep): SOLUTION (thanks Bruno2123), un-check "Google Location Service” in "Location Services" in system setup.
Second culprit: AudioOut_1 : I also had unchecked all the keytone and touch sound options in setup, however, I was still getting a boat-load of PWL for AudioOut_1. I tracked it down (trial-and-error) to PowerAmp. Even though PowerAmp was not actively running, I had checkmarks (in PowerAmp Settings… Headset) in “Pause on Headset Disconnect” and “Resume on Headset Connect”.. which were preventing Deep Sleep. By un-checking these, it stopped the PowerAmp AudioOut_1 PWLs… and allowed Deep Sleep.
Third: this was a surprising find. Started to continue to see excessive AudioOut_1 PWL times; however, fewer counts (number of occurrences). Turns out, every time I open PlayStore, AudioOut_1 PWLs incremented… every time I played certain games (even with sound turned OFF in the game’s settings), AudioOut_1 PWLs incremented. However, these did not interfere with Deep Sleep.. these PWLs incremented when screen was on anyway!
Anyway, hope others find this approach useful and hopefully will help you identify PWL/ Alarm problems and find solutions.

kishke said:
I know it's there but you wrote: "This is a weird one. I never could quite figure out what causes it, but it seems like it's there as long as the phone's plugged it."
So I just want to clarify it so you could give it a straight explanation. Also you have a small typo there it=in.
It's a great guide!
Click to expand...
Click to collapse
Sarcasm is a fine art, mastered only by years of practice.
DoctorQMM said:
snip
Click to expand...
Click to collapse
I completely forgot to mention CPU Spy! Honestly, I did almost all of my hunting using the BBS "Other" timers, which show the percentage of time in deep sleep, awake, screen on, PWL and KWL. That's not to say CPU Spy isn't a valuable tool, because it is, but I had plenty of luck with BBS alone.
I kind of hinted at the benefits of leaving all Location Services off unless you need them. That said, I'm going to link this post from the OP, because you've kind of underscored the need to do so here.
And yeah, again, good catch on wakelock times. I was thrown for a loop the first time I had 94% deep sleep and 9.8% PWL until I realized that a lot of those PWLs were coming from apps that were running only when the screen was on.

This is an informative post. Thanks op
Sent from my SGH-I727 using xda premium

Good stuff...
Too bad your findings point to Google in a lot of ways as far as battery drain... maps, gmail, etc...
I don't mind Maps that much. It has been pretty accurate from me. When I ran BBS last time, it showed no problems on my phone as far as wakelocks, etc... I had more problems with BBS than anything.. WEIRD....
Every time I unplug my phone, it will ask for root permissions about 5-6 times before I get to my home screen even.... I just don't have time to be hitting allow that many times... (yes, remember is checked...)
Thanks for the posting! I subscribed and will check back here often!

onealvideo said:
Too bad your findings point to Google in a lot of ways as far as battery drain... maps, gmail, etc...
I don't mind Maps that much. It has been pretty accurate from me. When I ran BBS last time, it showed no problems on my phone as far as wakelocks, etc... I had more problems with BBS than anything.. WEIRD....
Every time I unplug my phone, it will ask for root permissions about 5-6 times before I get to my home screen even.... I just don't have time to be hitting allow that many times... (yes, remember is checked...)
Click to expand...
Click to collapse
Almost sounds like you've got a ROM issue. I've also read that switching from Superuser to SuperSU can solve a root permissions "loop" like that.
Unfortunately, yeah, a lot of the PWL headaches I've come across can ultimately be traced back to a Google app. That said, I set out looking to make a battery last as long as possible. If you get to a point where you're happy with your battery life, I'd stop there regardless of what apps are still on the phone. The more you change, the more you can potentially screw up.

Can someone post the link to xda bettery stats, I search for it and find nothing.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

specter07 said:
Can someone post the link to xda bettery stats, I search for it and find nothing.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately you don't know how to search my friend.
http://bit.ly/NuHF7q
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jyazzie110 said:
Unfortunately you don't know how to search my friend.
http://bit.ly/NuHF7q
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Seems you don't know how to google either. Where's the free better bettery stats for xda members? That just shows the link to the store for the paid one.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

No at the bottom of the second post is dl link I just grabbed it
Sent from my SGH-I727 using Tapatalk 2

specter07 said:
Seems you don't know how to google either. Where's the free better bettery stats for xda members? That just shows the link to the store for the paid one.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I know how to google....your the one who cant search or read! Haha
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jyazzie110 said:
I know how to google....your the one who cant search or read! Haha
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Be nice
Sent from my SGH-I727 using Tapatalk 2

Illnevertell said:
Be nice
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Wow, when he says it... u have issues lmao

Illnevertell said:
No at the bottom of the second post is dl link I just grabbed it
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I kept scrolling pass it since on my phone you can hardly even see the attachment on the broswer.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Come on, guys, please keep this thread on topic.
Wanted to share some results with you. Screenshots below. No KWLs in 24 hours since being unplugged...not half bad. PWLs are within reason, especially considering that Alarm Manager is one of those PWLs that will hold even if your screen is on. The only thing that strikes me is Twitter alarming my phone 6 times, when it's set to never auto-refresh. Not a huge deal, but worth investigating.
70% battery 24 hours into a charge, screen-on time of 31m. Granted, I have barely used my phone today outside of sending a few texts, checking into XDA once and playing a few quick hands of Blackjack, but I'm still pretty stoked with this run.
**EDIT: Good thing I checked! Twitter had automatically updated earlier in the day, and when it did, it reset itself to sync every hour. Switched it back to never sync, and that should solve it.

[GUIDE] Basics For A Better Battery

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*If you find this Guide Thread helpful, feel free to hit the "thanks" button below!​
Getting a full day out of your battery isn't something that should be fantasized over, but rather is absolutely attainable with most phone configurations. With following this [GUIDE] you should have no trouble getting more from your Atrix 2's battery life. I will outline several "usual suspects" and "battery butchering bandits" that some may already know of, and some that you might not have ever considered. However, if you try all of these it, may ruin your Android experience because you’ll be constantly fussing with your battery; that's not what this is for. These are ALL the tips/tricks I know. Even I don’t use all of them. Using just a few of these (possibly even one or two) should be enough that you notice an increase in your battery life. So, n00bs and more knowledgeable users can both benefit from this, and for the more resident members here, we've all seen the threads like, “Please help with my battery issue”, “Does undervolting save you battery life” or “Getting horrible battery life”, so this should help give everyone some great ways to improve upon your battery's performance and lifespan between charges.
First off, let me start by telling you all to be realistic. What I mean by that is this: You Atrix 2 is meant to be used! Your Atrix 2 is more than just a phone, it is a pocket-sized computer, an arcade full of your most favorite games, it is meant to be talked on, played with, downloaded to, uploaded from, tweaked/modded/themed/rom'd and everything else that you may desire! So, again, after reading and implementing some of (or all, if you're neurotic) the things I'll outline, hopefully this will alleviate some of the questions you may have as to why your battery performance isn't everything you anticipated it to be. Though, if you think you will get days out of your battery's life by following these suggestions, you're either not using your phone for anything other than holding down a stack of papers, or you're just not being realistic. Will these suggestions help give you more from your battery? Absolutely. I know this is all (well, mostly) very elementary in effort, but overall this WILL HELP you.​
*"There are many things to consider when thinking of your battery's performance, such as: Animation Speed. Polling For Notifications. GPS, WiFi scans, Overclocking. CPU/Ram Usage, Proper Sleep, Widgets, Brightness, 2G/3G/4G Data Usage, Call Time, Text Volume, just to name a few ~THESE are the things that really affect your battery life. The bottom line is, if you truly want to save battery you are going to have to get your hands dirty... there simply isn't a "one-click" (or one-flash) solution."​
*STANDARD DISCLAIMER: I cannot be held responsible for any and all damage related to Hardware loss or Data or Software, which the user might cause while attempting these procedures. Additionally, I am taking the liberty to assume that anyone who attempts these procedures understands the potential risks involved. Though, there should be no such issues to arise from following this guide, I am still exempting myself from any liability.
---For All Users (Rooting Not Required)---
​
1) Turn Off Your Radio(s) When Not Using Them:
Radios are what connect your phone to the rest of the world. You have your general mobile connection, WiFi, data/internet connection (3G), GPS, and/or 4G. Those are listed in order from least to greatest in battery consumption. If you’re not using the radio turn it off. If you know you won’t be online for a long time, why turn 3G data on? If you’re at home, use WiFi instead of 3G. If you’re not using Google Maps why is your GPS on? You’d be amazed at how much battery life you can save just by turning off the radios that you aren’t using.
2) Vibrate Uses More Battery:
Anytime your phone vibrates a lot of battery is used. This include haptic feedback. A lot of keyboards have the option to turn off haptic feedback and I would recommend it. If you’re a heavy texter you’ll notice very quickly how much longer your phone will last. Also, if you’re in a place where you can easily hear your phone why do you need to have vibrate enabled? If you know you’ll be able to hear your phone there’s no reason for it to be buzzing too.
3) Don’t Use Task Killers:
Crazy, right? Android has it’s own task killer that’s actually very good. If programs are using too much memory your Android OS will kill it. A common misconception is that apps run in the background forever; this is not true. If an app is using too much memory (which links to battery life) it’ll be killed by your phone. That’s why if you play a game, check a message, and come back the game is still running. It’s memory usage isn’t that high. However if you put your phone down, walk away for an hour, and the game is still trying to run in the background, there’s a good chance it will be closed before you come back. Separate task managers have to constantly be running in the background which can actually use more battery than it saves. Yes, task managers can use more battery than claim to save.
4. Power Cycling:
Not sure about the real effectiveness of this charging policy, but some users have tried it and have claimed to have had good results from it. So, to begin with the phone in the on position, fully charge the battery with the phone on. Once your Atrix 2 is fully charged, unplug the charger until the led goes off. After the led goes off, plug the charger back in. When the led turns green , power off the phone. Now, with the phone fully powered off, 1) Unplug the charger. 2) Wait until led goes off. 3) Plug charger back in until the led turns green. When it turns green, unplug the charger again and go to step 1). Repeat steps 1) and 3), 10 times. This may take anywhere from 30 seconds to 30 minutes per cycle. Typically only about 1 minute though. It takes too much work for me, but I’ve done it once just to test it.
5) Don’t Use Live Wallpapers:
They look awesome, right? They also use a lot of battery (especially the more complex ones). We’ve all used live wallpapers to show off how cool our phones can be, but for daily use they can KILL your battery. Also, your animations will be a factor in diminished battery life expectancy. To adjust this, simply navigate to: Settings>Display>Animations>set to "Off or Medium". #1 when it comes to what is eating your battery, is your display. It always has been and always will be, so accept it and try to do something about it. If you don't believe me, go to your Settings>Battery> and see just how much percentages the screen takes up. But, you want to do something about this, right? This part is easy. Just lower the brightness. You can set it to a brightness that is low but you are still able to see well enough to function. Live Wallpapers fall into this category. They are cool to look at but static ones take up less RAM and also less display because they are not running all the time in the background. These screens are very bright at 100%, so tone it down.
6) Watch Your Applications:
You have to pay attention to your applications. I repeat. You have to pay attention to your apps! Especially if they run in the background. This can be anything from a harmless .99¢ game to a monster like a Live Wallpaper. The battery drain threat is twofold here because the application is running in the background but it could also be using its anonymous data collection abilities and sending that back to the Mother ship. Ever wonder why your signal bars in the status bar have arrows or other animations going back and forth when your phone is just sitting there? This is because some application is transmitting data, whether you are using it or not. There are apps in the market that monitor these situations like Watchdog Task Manager Lite or you can adjust app permissions like LBE Privacy Guard. Data transfer is #2 on the "What Kills My Battery" list.
7) Worthless Widgets:
They look cool. But widgets are nothing more than RAM and battery hungry monsters that you purposely put in your home screen. Think about it. What does a widget really do? All it really does is monitor an app that you have running. So not only is it running and taking up battery and RAM but the app that it is linked to is running in the background a la Facebook, Twitter, Google+, CNBC, MSNBC, BBC, …the list goes on and on because they want us to put THEM on our home page. What a great marketing campaign the widget is: "Hey, look at me new home screen!" "Cool. Hey what widget is that?" "Oh, it is (whatever widget)." "Nice, I’ll have to download that tonight when I get home." Right then and there, they have you and your battery. If you're serious about getting the very most out of your battery, get rid of the widgets. I know, they're hard to resist, but trust me, your Atrix 2 will be a better place if you want the most out of your battery.
8) Set Your Screen Timeout:
Some phones start with their screen timeout at 3 minutes or more. That’s completely unnecessary. While you don’t want it to be instant, you know your preferences. Set it to as low as you see fit. The sooner your screen goes off, the longer your battery life will last. I set my screen timeout to the lowest "never" -but, in doing so, every time I am done checking emails or sending a text, I kill the display with the power button to turn off the display. This takes some habitual conditioning, and if you're used to allowing your phone the responsibility of turning off the display for you, it might bode well for your battery capacity crusade to simply adjust this to the minimum. But, if if you're like me and like 'control' over your display, I recommend you still set the timeout to the lowest possible setting, in the event that you forget to manually shut the display off yourself. It's just good practice when going for battery life longevity.
9) The Charger, and What You Can Do Regarding it:
Using certain chargers causes a wakelock on your phone that prevents it from going into deep sleep. This can result in roughly 10% battery attrition, regardless of activity or screen on time. Before you try anything else, you should test each of your chargers and make sure they aren’t causing a wakelock. Though this shouldn't be of concern if you are using the stock wall charger that came when you purchased your Atrix 2, there are other aftermarket ones that you may not suspect as reasons to worry about charging your phone with. If you are not using the stock charger, and you suspect you may have a problem, or may be curious to find out: Install CPU Spy from the Play Store. Open the app to see how much time your phone spends in each CPU state. If Deep Sleep is a very small percentage, or Deep Sleep doesn’t even appear, you have a problem with your charger. Or, follow the method below to test each of your chargers:
Testing CPU Spy:
1) Plug your phone into the charger and turn the screen off. Leave it charging for about 30 seconds. (Don't do this with a fully charged phone, as I don't know how that affects the testing)
2) With the screen still off, unplug the phone from the charger.
3) Open CPU Spy, hit the menu button, and "Reset Timers". Turn the screen off.
4) Let the phone sit idle for a few minutes with the screen off.
5) Turn the phone back on and refresh the timers in CPU Spy (menu button again).
If Deep Sleep doesn’t appear in the list of CPU states, your phone is experiencing a wakelock brought on by the charger. It’s probably spent the majority of time at 192mhz or 384mhz. To further confirm this, leave your phone unplugged, restart it, leave the screen off for a few minutes, and then check CPU spy again. You should now see it going into Deep Sleep.​​
10) Your Camera Flash and Battery Don’t Get Along:
If you like using your camera LED for a flashlight realize that will absolutely MURDER your battery. In all seriousness, your flash uses battery more than any other process on your phone. Turn off the flash. Don't set it to "automatic", you should know when you will need it and when you will not. By setting it to "automatic" you're relying on the phone's light meter to determine if the flash is needed. Sometimes it is, and other times it isn't.
11) Low Cell Signal Hurts Battery
Your phone is always searching for a stronger signal…This process gets more hectic as the cell signal goes down. So if you’re at one bar your phone’s battery life will drop faster than if you’ve got full coverage. There’s not much you can do here, but if you’re in a place where your phone has little to no signal anyway, you probably won’t be making calls so you might want to just turn on airplane mode or your phone off. And with Airplane Mode, you can toggle the airplane mode on/off 3 times in a row, that will reduce your Cell Standby battery usage. It should only be necessary to do it once after flashing but if you think Cell Standby uses too much power at some stage, you could toggle again the airplane mode 3 times. This is a handy little trick, not well known, but should give you some relief with Cell Standby usage. I travel for my job, which means that at times, I do not get good reception, or bounce around between Edge/3G/4G, and each time that happens, your Atrix 2 is sucking more juice by trying to find a good signal. If you are not in a static network, meaning one that is either 3G/4G at any given time, without locating off-network tower connections, turn your radio off or switch to Airplane Mode.
12) Speaking Of Syncing…:
Check your settings to see what is syncing and when. You probably have things syncing you don’t even use (stocks, news, contacts, etc). You can turn those off and edit the other ones. I don’t need my contacts’ statuses every hour, so my facebook sync is scheduled for once a day rather than the old once an hour. Find out what you need and how often you want it, and turn the rest off. I know you are very important and you need to know what LeBron James is doing right now, or that you need to upload a picture of you and your girlfriend every time you two are at a party, drinking beer. That is fine and I applaud you for it, and will probably download the picture and Photoshop myself in your place. This is not the problem. Syncing your accounts is. That is what is causing battery drain. Do you really need to have your FB widget (see widgets section) streaming all day long? I doubt it. Kill it (not LeBron, but rather the auto-syncing). Every time you “friend” someone their numbers, contact info gets sync’d to your phone. Also, there are settings in Facebook, Twitter and Google+ that you can upload pictures instantly. Don’t do that. Once you do, it is out in the Ether-World and just swallowed a bunch of battery doing it too. Settings>Accounts and Sync>Auto-sync>uncheck it
13) Don’t Use GPS Unless You Have To:
Some apps give you the option to precisely determine your position using GPS, or make a general estimate (usually within 100 meters) based on WiFi or 3G data. While this isn’t always the best (like if you’re driving or getting navigated), try to use the 3G connection when it doesn’t really matter. The data radio uses far less battery than GPS.
14) We're Gonna Need A Bigger Boat, erm... I Mean Battery:
If still not completely convinced that you have have stellar performance from your stock Atrix 2 battery, you can always check out the Atrix 2 Accessories threads for suggestions and/or discussions on extended capacity batteries. I've never used one myself, but don't see as to why this wouldn't certainly add to your life expectancy of your battery -assuming you're choosing foregoing the suggestions above, and simply insist on having your widgets and eating them to -or your battery, for that matter. Nonetheless, there are several manufacturers that supply an aftermarket extended capacity battery for the Atrix 2, just use your pal Google to help you find one.
​
---For All Users (*Rooting Required)---
​
*FOR ROOT USERS: If you’ve rooted your phone you have a few more options. You don’t gain too many more options, but they are even more effective than the ones listed above.
Underclock Your Phone:
Just like SetCPU can overclock your phone, it can underclock it as well. Set it to underclock when the phone is sleeping or even lower the max clocking speed. This will give your CPU's scaling frequencies a lower "resting" point, and will not allow the load of the CPU to be any higher than the maximum setting you permit. I know everyone who likes to get their hands into the belly of their Atrix 2 and start tweaking it loves the idea of overclocking, but c'mon, you don't have to run your CPU at 1.3GHz all day, everyday. Scale that baby down when you don't require such a high CPU load, and trust me, your CPU and your battery will thank you. Also, along with underclocking your CPU, you can undervolt as well. This will allow (after some testing you'll need to do first to make sure you're not undervolted too low for stable CPU loads) for your Atrix 2 to run at a lower voltage consumption, and with these types of settings, you can allow your Atrix 2 to run at your desired CPU frequency scaling, but a slightly lower voltage rate. *Note: As aforementioned, some testing is required for this to be effective with both your CPU's table values, as well as how it may improve your battery's life. Also, please reference This Thread for the latest kernel/module overclocking and undervolting methods.
Wakelocks That Destroy Your Battery Life:
If you're not familiar with wakelocks, they're basically processes that run on your phone that prevent it from going into deep sleep. Deep sleep is the mode your phone should go into when you're not using it so that it can conserve battery. Some wakelocks are intentional, while others can be the result of rogue apps or system processes. If you're trying to maximize your battery life, you know this already. Some wakelocks are happy, friendly things, but many are silent leeches, sucking away your battery life while you remain blissfully unaware of what's happening. First off, you have to understand the difference between kernel wakelocks (KWL) and partial wakelocks (PWL). KWLs are wakelocks caused at the kernel or hardware level. Some of these are benign, and some of them are vampires. The only way to solve them is to change how your phone behaves. To effectively find your wakelocks, you'll need Better battery Stats It's free to us XDA users. You can get it IN THIS THREAD. More on wakelocks can be found in the post below.
Use SetCPU:
Create a special profile that forces the device to run at low clock speeds when the display is off.
Go to profiles
Check Enable
Press Add Profile
Set the following:
Condition: Screen Off
Max: 600MHz Max
Min: 300MHz Min
Governor: ondemand
Priority: 50
Press Save
On the Main tab make sure you have
Max: 1000MHz
Min: 300MHz
Governor: ondemand
Scheduler: deadline
Clean Out the Bloat:
Some of the bloatware and unnecessary applications on our Atrix 2's can drain battery. I really recommend you freeze the applications by using Root Freezer and run your Atrix 2 for a few days after you have frozen an unwanted application, and certainly before you decide to uninstall. This way you won’t accidentally uninstall something your phone needs to remain stable. Albeit, most of the custom roms that you will see here are already "de-bloated", if you're new to rooting and Android, and haven't quite decided that taking the next jump to flashing roms is for you, use Root Freezer to "freeze" applications that you suspect are bloat, until you decide to run a de-bloated ROM -and you will, eventually...
The Stock ROM Sucks:
If you’re still unrooted and on stock Gingerbread, I feel sorry for you. What the heck are you doing on this forum if you’re scared to flash a new ROM? This guide would be way too long if I tried to explain the battery improvements you might see by stepping up to the Stock ICS leak. You’ll probably see even more improvement if you flash one of the many custom ROMs in the Development section. If you’re dedicated to getting the most out of your phone, spend a weekend reading the ever-loving crap out of the stickies in the Development forum, and the [ROM] threads. Only after you have read those threads and feel like you have a good understanding, backup your phone and flash a new ROM on it. As long as you’ve backed up properly, you can flash between several ROMs and choose the one that works best for you. If you have any questions about the ROM you’re trying to flash, ask in that ROM's specific thread, don’t start out by creating a new thread in the General Section. You did do a search first, right?
Lost DIR Liability:
Let's say that you have your phone plugged into your PC and for some reason you, in a fit of rage, jerk the plug out without unmounting it first. This creates a file that is put into your LOST DIR folder on your SD card. Anytime you don't safely unmount the SD card, it will create a file in that folder. In the scheme of the SD card, it isn't too much, but I don't like having useless items free floating about. Clear them out using Root Explorer or a like Root File Explorer, and this will free up some (depending on how many times this has been done) valuable memory real estate.
Tombstones:
So you are downloading an update from the market and for some reason your phone freezes and the Force Close-Retry-Wait doesn't work out for you. You have to do a battery pull. Frustrating I know and the memory takes a hit too. Every time you have to do a battery pull because of a freeze up or something of the like, it creates a TOMBSTONE file in /data. These are useless and can be deleted. If you are flashing ROMs and are constantly having to do battery pulls b/c market crashes or an app freezes, then you are creating a Tombstone file. Here is where your file manager (with root) will help. Go into /data and scroll all the way to the bottom and open /tombstone. There should be some files in there and depending on how many there are, I could be a nice chunk of wasted memory. Just select all and delete. They are not needed. Your internal memory should go up by doing this.
Lost & Found:
Same scenario, but now go into /data/ cache or /cache and you'll see Dalvik Cache (don’t mess with this), Lost & Found and Recovery. If you tried to download an app and it got frozen for some reason and had to do a battery pull, the apk will be free floating in there, uninstalled (free floating radical). You can delete this. While it isn't in the Dalvik Cache folder, it is taking up space. Once you are able to download something completely and correctly from the market, it will populate into Dalvik Cache correctly and won't be a free radical, as I like to say.​
---For All Users (Miscellaneous)---​​​​​​
Some More Memory Clearing Tips:
Home Launcher:
If you have a 3rd party home launcher, see if it has the ability to long-press an icon to take you to its screen in the Manage Apps section. I use ADWex and if you long-press on say Market, it takes me to the same place as is I were to go to Settings>Applications>Manage Apps>Market. Instead of all that, just long-press on the icon and BAM! it takes you there. Here you can clear out your cache for the market or delete the data (if you need to do that). Or clear the cache of the XDA app because you looked at too many posts with pictures, etc.
Browsers:
These develop cache that takes up memory and space, especially the stock browser. If you use a 3rd party, you can get the settings to clear cache, cookies, passwords,…on exit. I use Dolphin, but I am pretty sure that most have something like this on them. (side note: most 3rd party browsers once exited will not run in the background unlike the stock one)
Media:
So you download a bunch of mp3's from the internet or you've clicked on some pix and saved them to your SD card. Or maybe you just felt like wiping your card and having a fresh start. Every time you reboot, you phone will scan media. No big deal, but the more you criss-cross things from PC to phone and back again, it can create a bunch of double files in your media cache on the phone. With the proper placement of .nomedia files (this prevents your media scanner from doing just that, scanning media- i.e. pix, jpegs,…Don’t place a .nomedia in your music, album art or DCIM files**bad). Every once in a while, I'll hit the Diskusage or go to Manage apps and clear the media cache. Then I got to my file manager and the DCIM->Thumbs and delete the thumbnails files (should be 2). Unmount the SD card and remount to start the media scan, pull up the Gallery and wait for the thumbs to come back (depending on how many you have, this could take awhile). By doing this you can get almost 5 mb back if you have a bunch of double scans in your media folder.​
Applications That Use Advertisements:
Try to avoid ad-supported applications, if you can. A research showed that in apps where there is adds, 70% of the power use comes from downloading and managing those adds to your screen. With just a 30 second use of an application that uses ads, it might drain your fully charged battery anywhere from 0.35% to 0.70%, which is enough to completely discharge the battery within a couple of hours if the process is repeated. This, according to a team of researchers, show that applications using advertisement support can take a high toll on your Android smartphone’s battery. The researchers analyzed how Android apps use the battery and concluded that the ad-serving processes that run in the background are responsible for heavy battery drainage. This may not seem like much, but so many applications that are free utilize advertisements and are blasted about the bottom or top of your application. I know I'll likely get ostracized for mentioning this, at least by some of the developers who rely on ad-support within their applications, but there is a way to eliminate these ads from showing themselves in your application(s). This is for BOTH rooted and un-rooted devices, as there are applications available from Google Play Store, such as AdFree Android (for ROOTED users only) or you can find one that will work on a non-rooted device. Or better yet, you could pony up the nominal dollar or two and show your own support for your favorite applications by buying the paid version, and thus eliminating the ads in that manner.​
*I will be updating this OP as I see necessary, and if anyone has useful tips that I may have missed or overlooked, please let me know. I'm aware that there are threads of this capacity floating about through XDA, but I have taken the liberty to create on specifically for our community.
Credits & Big Thanks To: Woodrube

Wakelocks Explained
Two final notes before I get started with the Wakelock Portion of this guide: Do not go wakelock hunting right after installing a new ROM or clean-wipe reinstalling your current one. New ROMs cause the phone to go nuts for a little while, as things decache and little behind-the-scenes tweaks are made. Wait one full battery cycle (100% to 0%, which you're probably doing to calibrate after a clean ROM install anyway) before trying this, or you'll drive yourself nuts. Also, remember that solving one wakelock will often create another, especially early in this process. That's normal and to be expected. God does not hate you, your ROM of choice is not crap, your phone is not glitched, and a clean install while your current ROM is still settling in will only make things worse.
So, how do you track these wakelocks down with BBS? This is a really complicated procedure, so make sure you're with me. First, open BBS. Then, see the drop down menu at the top that probably says "Other" right now? Tap it, and then you'll see "Kernel Wakelocks" and "Partial Wakelocks" below. That was obscenely difficult, right?
There are a couple of other features of BBS that we'll make extensive use of later, but there's one you need to know right now. Tap your phone's menu button to get the BBS menu up. Tap on "More". See the button that says "Set Custom Ref."? You'll need it--you'll need it a lot.
Last, but certainly not least: modifying your system in any way, including altering or deleting processes needed to resolve wakelocks, can have unpredictable results. Use caution and make backups of your apps and data, as well as nandroid backups, frequently while finding and eliminating wakelocks. Any modifications you make are done at your own risk, and I assume no responsibility for any damage you may do to your phone while cleaning out wakelocks.
With that said, we'll get started with the KWLs, as they're the trickiest to get rid of. Use the guide below to identify your wakelock, what is causing it, and how to get rid of it.
KERNEL WAKELOCKS
wlan_rx, wlan_rx_wake, wlan_wake: This is a wakelock caused by network traffic. The easy solution would be to just turn off Wifi, but be careful doing so! If an app goes to sync and it sees that Wifi is off, it will search for a mobile data connection (which causes the ConnectivityService wakelock). If it can't find a mobile data connection, it will wait and search again at its next sync interval and/or automatically sync when the phone wakes up. This wakelock can also, deceptively, be caused by the Wifi network itself as it refreshes connections or refreshes IPs.
To fix: This is a tricky little sucker to fix, as there are so many possible causes for it. Airplane mode is a safe bet--syncing apps seem to "respect" airplane mode, whereas if Wifi alone is turned off, they'll just try to find a way around. But then, of course, you lose your ability to talk on the phone. If you're particularly unlucky, your Wifi network itself will be the problem.
PowerManagerService: This is probably your #1 or #2 kernel wakelock, and you'd probably love to get rid of it at all costs, right? Hate to say it, but there's not much that can be done about this one. PowerManagerService is a KWL that serves as a "catch-all" for your PWLs. It's a placeholder, nothing more, nothing less. Don't spend much time worrying about it.
To fix: Reduce PWLs. See below.
deleted_wake_locks: Remember what I said above about force-stopping an app and deleting its cache and data before uninstalling it? This wakelock is why. It's the PowerManagerService for deleted apps. Once the app is gone, the wakelocks it caused suddenly become unknown to the system, so they get lumped in here. This number can also go up as the system "looks for" deleted apps and/or finds more wakelocks associated with them, but not dramatically.
To fix: Make sure to force close apps and wipe their cache and data before deleting. A reboot should eliminate the wakelock entirely. If it's still showing up, wipe phone cache and Dalvik.
sdio_al: This is an annoying wakelock, as there are two potential causes for it. One's easy, and one sucks. The easy one is that you've fallen victim to the charger wakelock. If your charger shows up as AC Regular Charge, there's your problem. If it's AC Fast Charge or USB Normal Charge, your wakelock is caused by your SD card. That can be an irritating fix, but the SD card version of this wakelock is typically small enough that it's not worth addressing.
To fix: Check your charger and adjust if needed. If it's the SD card, it's probably not a strong enough wakelock to be worth fixing, but if you want to fix it, you'll have to format your SD card. If formatting doesn't work, format it again, then wipe cache and Dalvik.
alarm_rtc: This is your phone's internal alarm scheduler, set to wake up your phone for sync, push, etc. Closely related to the AlarmManager PWL.
To fix: Check your apps and make sure they're only set to sync when you want them to, not for constant push or stupid-short intervals.
mmc0_detect, mmc1_detect, mmc2_detect: I'll be honest, I have no idea what causes these. Fortunately, they seem to be minimal, so I've never wasted much time worrying about them.
To fix: Good question!
vbus_present: This is a weird one. I never could quite figure out what causes it, but it seems like it's there as long as the phone's plugged it. Strange...
To fix: Check your phone. Is there a cord plugged into it? If so, does that cord lead to a source of power? Like, I don't know, an adapter plugged into a wall socket? That's your root cause. vbus_present is a completely harmless wakelock, which will appear for as long as your charger is plugged into your phone. Set a custom reference point in BBS when you unplug, and you'll note that it's magically disappeared.
There are a number of other, lesser KWLs that I'm not going to worry about here because you shouldn't worry about them either. You might occasionally see a battery cycle with very low (sub-1%) KWLs, but that's the exception and not at all the rule.
PARTIAL WAKELOCKS
PWLs are a different beast. These are almost all caused by an app (with a couple of notable exceptions). For that reason, I won't go in-depth on too many of them, as the solution is usually to delete the app causing them. There are a few notable ones, and a few apps that merit mention.
AudioOut_1: This is an evil leech of a wakelock that will drain you dry if given the chance. For being such a pain in the app, it's surprisingly easy to get rid of. This wakelock is created whenever the phone's speaker plays a sound. With 99% of sounds, it goes away almost instantly. With keypad sounds, however, it doesn't go away so quickly, and it will sit there draining your battery for as long as it goes unnoticed.
To fix: Open Settings, then select sound. Turn off key tone sounds, touch sounds, screen lock sounds and vibrate on screen tap. It'll take some getting used to, but the extra battery you'll coax out just by solving this ridiculously simple problem is more than worth it. See DoctorQMM's post (#5), linked at the end of this one, for info on additional causes of this wakelock and how to fix them.
ConnectivityService: This will appear whenever your phone is trying to connect to a mobile data network. Excessive wakelocking here suggests that your phone is having a hard time finding a network, and an even harder time staying on it.
To fix: Test out different radios and see if one's better in your area. If you're able to control your radio bands and you don't live in an LTE area, setting your phone to hunt for GSM/HSPA connections only can save you a little bit of juice here. Not much, but every drop counts, and if you're not using LTE anyway.
AlarmManager: This isn't a wakelock unto itself so much as it's a compilation of app alarms and the time they held the device awake for. Seeing the wakelock alone doesn't tell you much, but here's where one of those features of BBS that I said we'd be using comes in.
To fix: Open BBS. Tap the menu button, then "More", then "Raw Alarms". That will show you which apps are waking up your phone, and how often they're doing so. Google will have a ton of wake-ups, but they're mostly innocuous. We'll discuss some of Google's problem apps later. Email clients will also have a ton of alarms. If anything else looks out of whack, though, first check the app settings to see how often it's refreshing. If the app is set to refresh every hour but it's set off 400 alarms in the last 30 minutes, get rid of that sucker and email the dev. You can't eliminate this wakelock, and it's constantly my #1 PWL at this point, but you can minimize it.
MediaScannerService: This is a wakelock created by the system as it scans your device for music, movies, pictures, etc. Once in a while, it will randomly get hung up and hold the phone at 384 MHz for...well...until you notice and do something about it. Like AudioOut_1, this is a heavy-drain wakelock. Luckily, like AudioOut_1, it's almost always easy to fix.
To fix: Reboot. Ninety-nine times or so out of a hundred, this solves the problem. If the problem persists, go to Settings>Applications>Running then tap on "Show cached processes". Find the Media process and stop it manually to kill the wakelock. That's a short-term fix, though, as a persistent wakelock from this process most likely means you have a corrupt media file somewhere on your phone- and there are a lot of sounds, movies and images on your phone. This is one of the few wakelocks that, if it's a regular problem, justifies considering a full wipe and clean reinstall. That's not because it's doing any kind of damage to your phone, but more because sifting through every single media file on your phone to find the culprit isn't really a practical solution.
SyncLoopWakeLock: This is exactly what it sounds like; your phone is being held awake while apps sync. There are two possible causes for this: apps syncing (duh) and a bad data connection.
To fix: Open BBS. Tap the menu button, then "More", then "Raw Network Stats". This will show you which apps are using the most data, and help you narrow down possible culprits. Once you've done so, check those app settings and make sure they're not set to constantly push notifications, refresh every five minutes or anything dumb like that. If they're set correctly and still holding sync open that long, try downloading the Speed Test app off of the Play Store and test your phone's connection. If your connection is on the slow side, it's possible that the apps are struggling to sync because of your bad data connection. Try flashing different radios to see if that solves it. If the troublesome apps remain so after you've found a better radio, it's best to just delete or freeze them.
GTALK_ASYNC_CONN family: Despite its name, this wakelock doesn't seem to be directly related to Google Talk. How do I know? I haven't had Google Talk on this phone in over a month, but the wakelock still pops up from time to time. These wakelocks can be absolute destroyers of your battery if given the chance, and unfortunately, there's no known root cause for them, and no reliable way of eliminating them.
To fix: These wakelocks will often disappear within a minute or so of generating. If one becomes persistent, reboot into recovery and wipe cache and Dalvik ASAFP. That solves the problem temporarily, but it will reoccur. Thanks, Google.
NetworkLocationLocator: What a lovely name for such a lovely wakelock. It's a minor annoyance usually, nothing more. If this one is persistent, it's because you're in an area with crappy cell coverage and very few Google-mapped WiFi networks.
To fix: Why, exactly, are you leaving Network Location on all the time anyway?
SCREEN_FROZEN: Uh oh.
To fix: If this is high on your list, you've got bigger problems than a wakelock.
PWL OFFENDING APPS
We're almost done, I promise!
Down here, I'm going to list off for you apps that will cause you severe PWL migraines, and what to do about them.
A note when uninstalling Google built-ins: Google built-ins are often system packages, and deleting them can have unpredictable results. I highly recommend freezing them in Titanium Backup for several days to see how the phone runs before uninstalling them through there as well. Deleting system processes is inherently risky, and I assume no responsibility for your own decisions.
Facebook: Any social networking app will want to sync as often as it can, but you can overrule that by setting notification intervals. Thing is, Facebook doesn't respect those intervals, and wakes up the device for data exchanges pretty constantly (even though your news feed may only update every hour or so when you want it to). This app is no better than bloat, and should be treated as such when you clean house.
Alternative App: Friendcaster. It's as good a third-party Facebook client as you'll find on Android, and it only wakes up when you tell it to.
Gmail: A running theme here will be that if there's a non-Google equivalent to a Google app, you should probably kill the Google and download the alternative. Gmail is an alarm fiend, and one of the main offenders if you have an excessive SyncLoopWakeLock problem.
Alternative App: How many email clients are out there? I've had the best luck with the stock Email app, but K-9, Kaiten, MailDroid, even Enhanced Email and Touchdown for the power users are all great alternatives. Speaking of which...
Whatever email client you're using: Email clients will always be high up on the list of alarms, and that's by their nature. Keep an eye with raw network stats on how long they're connected for, and don't be afraid to experiment. I tried K-9, Kaiten and MailDroid before settling back on the stock Email app as the one that gave me the best balance of battery life and necessary features.
Alternative Apps: Download and try out different clients until you find the one that works for you. Nothing ventured, nothing gained, right?
Google Latitude: Latitude is a tracking service. As such, it tracks you. Beyond the creepiness aspect of that, it holds your phone awake pretty often while doing so. Kill it. Kill it with fire.
Alternative App: Personally, I'm not into the whole stalking thing, but I've heard that Glympse works quite well.
Google Maps: Colossal waste of space and battery. You can do better. An important note on Google Maps: this app will still wake your device up even after being frozen in Titanium Backup. I don't know how it happens, but it does. To truly solve the alarms from Google Maps, you have no choice but to uninstall it. Do so at your own risk.
Alternative Apps: I'm a fan of Waze for navigation and MapQuest for a Google Maps-ish "browseable" interface. OSMAnd is also a great alternative, but it uses a ton of internal memory because of its offline nature.
Google Play Music & Movies: Updates itself constantly and wakelocks. Even if you freeze it, it still somehow manages to tell you that there's an update available. It's the Google zombie.
Alternative App: There are literally 100+ music and/or movie players out there. I'm sure you can find one that works for you. I'm a big fan of RocketPlayer for music, and I just use the stock video app more often than not.
JuiceDefender: What's that you say? JD sets off tons of alarms and holds the device awake for more time than I'd care to discuss, largely because of its data control settings. More harm than good, in my opinion.
Alternative Apps: JuiceDefender's main goal in life is to minimize the amount of time your device is held awake. Therefore, if you've just gone through all this to clear out wakelocks, do you really need another wakelock-prone app to do what you've already done?
Skype: Occasionally, after a call, Skype will wakelock. This is not designed to happen, and is more a glitch in the app than a forced sync. Force-stopping the app and clearing its cache have solved it for me on the rare occasion that I've seen the wakelock occur.
Alternative Apps: No idea. I don't personally consider this a "replace" situation.
That's the bulk of what I've learned from clearing out wakelocks. Remember how, early on, I specified that the search engine of your choice was the third tool? Simple fact is, I haven't installed every app on the planet, so I haven't seen every PWL out there. Because of the way my phone's set up, there are KWLs that I've never seen and never will. If you've got a pesky wakelock that won't go away and it's causing noticeable battery drain, Google (or Bing, or Ask.com, or whatever) is your friend. Good luck, happy hunting, and enjoy the extra battery life you'll get just by spending a few hours over the course of a few days tracking down and killing those wakelocks.
Credits & Big Thanks To: T.J. Bender

A Little Charging Trick
If, after rooting or more likely that case after flashing a new ROM, you often have battery reporting errors, and re-calibrating the battery along with some steps I will outline for you below will ensure that your battery is getting a full charge, and the battery reporting accuracy is right on. I run my device's CPU governor in performance mode all the time, and with a CPU overclock of 1.25GHz and various tweaks, I have about a day and a half - to a day and a quarter of full run time from my battery. This is with moderate usage (calls, emailing, text, gaming, web browsing, etc.) so you should have no problems getting acceptable battery performance after following these steps, coupled with the ones I've given in the OP:
1. Take the case off your Atrix 2 (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your Atrix 2 to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. Write it down.
My Atrix 2 was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your Atrix 2 completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%.
10. Let it sit there charging for 2-3 hours (or more).
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours (or more), turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
13. When the phone turns on, go into Battery Calibration app again and look up your MV numbers -if you were like me, they should be significantly higher than before. After this whole process I had 4351MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
14. Before going to sleep - Install Watchdog Task Manager Lite from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
15. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
16. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.

NICE JOB!!!!
Sticky... I will ask...

Nice Guide just fixed minor things and my battery is already better!
Sent from my locked MB865 on Ice Cream Sandwich.

temperature
what causes battery temperature rising ? oc? data? games?
cause i've noticed that battery drops horribly on graph when temperature increases

shardul.phatak said:
what causes battery temperature rising ? oc? data? games?
cause i've noticed that battery drops horribly on graph when temperature increases
Click to expand...
Click to collapse
Battery temperature is a direct result of device usage. If you go to sleep at night, and are NOT charging your phone overnight, in the morning when you wake up and roll over to check xda or Facebook or whatever, the phone isn't warm, right? During the day, if you're running a browser or streaming music or just have a lot of screen time on, your phone will get warmer and warmer. It's hard to say without seeing any test results from your phone as to what is causing higher temperatures, but it's safe to say that any or all of the things you listed could be a cause. Obviously, overclocking WILL cause your phone to run warmer. Your permitting a higher CPU load value at the maximum frequency scaling, and subsequently your phone's CPU is working harder. Try some (or most) of the suggestions in this thread and see if you notice a lower temperature and battery drop as a result of the changes...

Great guide mister strider!
Motorola lied and I'm still locked mb865

Nice! Thanks for putting this together, Apex... Keep on striding, man!

Apex_Strider,
Can you tell us the final result when you applied these trick on your phone ?
Mine was not used any above, and gave me ~24hrs with heavy use, wifi on 24/24, screen on 5h using wifi. Phone for 15 mins/day, sometime movies for 2hrs.
I charged it at 22:30 PM every night.

Awesome guide. I made my lady read it. She was constantly complaining about her new atrix2's battery life. She learned quit a bit. It was easier to take this way than coming from a frustrated loved one.
You should use your skills to write a guide about how to use the report button and what help or response should be given and how to give it by non op's or those not involved in a given project for all the sudo (ha!) forum cops. (See I can't do it. My sentences are too long.) The constant correcting of anyone by everyone is getting annoying.
Sent from my MB865 using Tapatalk 2

Nice guide Apex!! Keep up the excellent work!

Thanks guys, your appreciation of my time doing these is more appreciated than I can say. Writing has always been a passion of mine, and really the only thing I was good at in school/college- when I wasn't ingesting illicit substances by the truck load. I'm working another guide thread now, hopefully completing it by tonight or tomorrow sometime. Thinking, since I'm nowhere near "dev" status or knowledge, I might apply for Recognized Contributor. Not sure we have any here in this community, at least that's not as present here as I am. Not to slight anyone who might be one, just haven't seen any floating around in here...
Sent from my SAMSUNG-SGH-I747 using xda premium

Apex_Strider said:
Thanks guys, your appreciation of my time doing these is more appreciated than I can say. Writing has always been a passion of mine, and really the only thing I was good at in school/college- when I wasn't ingesting illicit substances by the truck load. I'm working another guide thread now, hopefully completing it by tonight or tomorrow sometime. Thinking, since I'm nowhere near "dev" status or knowledge, I might apply for Recognized Contributor. Not sure we have any here in this community, at least that's not as present here as I am. Not to slight anyone who might be one, just haven't seen any floating around in here...
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Wait isn't "ingesting illicit substances" part of the college curriculum? If it is not officially it should be, cause it does, ur, um, it did help... LOL.

vinamilk said:
Apex_Strider,
Can you tell us the final result when you applied these trick on your phone ?
Mine was not used any above, and gave me ~24hrs with heavy use, wifi on 24/24, screen on 5h using wifi. Phone for 15 mins/day, sometime movies for 2hrs.
I charged it at 22:30 PM every night.
Click to expand...
Click to collapse
Are you asking for my "results", meaning my battery usgae stats (i.e.: maximum duration of battery from full charge to full discharge, screen time, etc.)? If so, I'll have to do this again, as it's been a couple of months since I had. Keep in mind, that everyone's results will vary, as it depends on so many different variables.
Also, being on WiFi will demand less from your battery than relying solely on the network connection. So, if you're 'always' on WiFi, you will get more from your battery than not. On my Atrix 2, I can get a full day or more from one full charge. Now, this is from my usage, and like I mentioned -everyone's will vary. Generally speaking, in practical use Wi-Fi isn’t any more or less friendly on your battery than cellular is. Sure there are differences, but the biggest one of all is distance. Since you’re probably a good-deal closer to your Wi-Fi WAP than you are to your cellular tower, it’s likely that your battery life will be better if you’re using Wi-Fi rather than cellular data.
The charging trick I outlined in this thread is very useful for battery reporting errors after flashing a new rom, or just is one feels like their battery isn't getting the kind of "full" charge it should. It helped me out, as well as others...

I have an extended battery that I've run through several full drain/charge cycles over the past two weeks (when I got it). However, it still doesn't register the charge % properly - it will say 5% for over a day. I used the BatteryCalibration app to no avail.
Ideas?

Ajfink said:
I have an extended battery that I've run through several full drain/charge cycles over the past two weeks (when I got it). However, it still doesn't register the charge % properly - it will say 5% for over a day. I used the BatteryCalibration app to no avail.
Ideas?
Click to expand...
Click to collapse
Try the battery charge trick above, without the Watchdog part -sounds like a battery reporting error. Are you using 1% battery mods?
Sent from my SAMSUNG-SGH-I747 using xda premium

Apex_Strider said:
Try the battery charge trick above, without the Watchdog part -sounds like a battery reporting error. Are you using 1% battery mods?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
No, I'm completely stock with root.
The Battery Calibration app DOES list the appropriate mV levels, though.
I'll give it a shot.

governors, i/o schedulers ?
may be this & this could help if u want to do sum experiment :silly:

+10 awesome job again !!!!!

[Q] Help with Tasker

Hey everyone, first I'm not really sure if this belongs in a Tasker forums. Seeing as I use a N5, I figured it could also go here. Anyway, I've been having some problems with Npl wakelocks. I downloaded wakelock terminator with xposed and it seemed to have helped, however something didn't seem right as my battery was draining the same amount as when the wakelocks were happening. The only time I wasn't having the drain was when location was set to device only, which makes sense.
I'm completely new to tasker. I've watched a few tutorials and I've messed around with it a bit but with not much luck. I wanted to do one of two things. Either have location set to battery saver/high accuracy when the screen is on, and have it set to device only when the screen is off. Another option is to have it set to battery saver/high accuracy when google now/maps is open and device only the rest of the time. I feel like this shouldn't be that hard but I messed around with it and got no where. Anyway, what are your guys' opinion about this strategy and would anyone be able to help me with implementing these tasks. Thanks!

I wouldn't go the route of using tasker for your problem. And I would ditch that xposed module for wakelocks too. I run rooted with xposed on high accuracy at all times. My battery life is great. You need to find the source of your battery drain and eliminate it. Don't look for a bandaid fix using tasker. My guess is you have some rogue app killing your battery. Give us a list of all your apps, or delete them all, and install them one by one to track down the culprit. Also, are you running stock Rom and kernel? What other mods do you have?

Lokke9191 said:
I wouldn't go the route of using tasker for your problem. And I would ditch that xposed module for wakelocks too. I run rooted with xposed on high accuracy at all times. My battery life is great. You need to find the source of your battery drain and eliminate it. Don't look for a bandaid fix using tasker. My guess is you have some rogue app killing your battery. Give us a list of all your apps, or delete them all, and install them one by one to track down the culprit. Also, are you running stock Rom and kernel? What other mods do you have?
Click to expand...
Click to collapse
I can run the phone as normal today with location and everything on and post my BBS log after. Basically, when I'm at home the battery is great. However, ever since updating to the new google search app I've been having extreme wakelocks from the Npl whenever I would leave my house. Which is why I found a thread on xda that was talking about that exact wakelock. You're right though. I'm going to get rid of the app because it seemed weird. The wakelocks weren't showing up on BBS but I feel like it didn't get rid of them. Who knows though, maybe you're right and it is something else that's draining the battery which is why the wakelock app didn't help.
Anyway, I'm running stock ROM/kernel with xposed. I use greenify module, appOpsX, snapshare, gravity box, and gesture navigation module. With gravity box I just use custom quick settings, smaller nav bars, some status bar mods like the day and double tap to sleep. However, again I have had the same GB mods since before the drain. I use a pebble however I've never had a drain from that and I've been using it since Dec. Most of my apps are greenified including facebook, instagram, as well as all my music streaming apps. A lot of the google services I don't use are disabled like books/magazines/movies. I have snapchat, but I don't use it too much, and facebook messenger that I don't greenify. When I check GSam stats though, android system and kernel take the most battery, followed by music players if I was streaming music that day. The rest of the apps are way down the list.
I posted in the battery thread asking if anyone had the same problem with the wakelocks after having the latest google play services. I noticed mine is still 4.3 for some reason so I might just update manually from androidpolice and see if theres a difference. But yeah, I will keep this updated with todays logs.

Try this. Use titanium backup to uninstall Google play services and Google search. Then launch maps, and reinstall both from the play store.

PsychDrummer said:
Another option is to have it set to battery saver/high accuracy when google now/maps is open and device only the rest of the time.
Click to expand...
Click to collapse
This is what I ended up doing. You will need the secure settings plugin for tasker.
Set up a new profile for application "Maps".
When on, launch task GPS On (Secure settings, configuration GPS enabled)
Exit task, launch task GPS On (Secure settings, configuration GPS disabled)
I used the app factory to create an app for this, and use that on my N5 and my second phone too. Works great. Enables GPS when I launch Maps for navigation, and switches to battery saving when I exit Maps

PsychDrummer said:
I can run the phone as normal today with location and everything on and post my BBS log after. Basically, when I'm at home the battery is great. However, ever since updating to the new google search app I've been having extreme wakelocks from the Npl whenever I would leave my house. Which is why I found a thread on xda that was talking about that exact wakelock. You're right though. I'm going to get rid of the app because it seemed weird. The wakelocks weren't showing up on BBS but I feel like it didn't get rid of them. Who knows though, maybe you're right and it is something else that's draining the battery which is why the wakelock app didn't help.
Anyway, I'm running stock ROM/kernel with xposed. I use greenify module, appOpsX, snapshare, gravity box, and gesture navigation module. With gravity box I just use custom quick settings, smaller nav bars, some status bar mods like the day and double tap to sleep. However, again I have had the same GB mods since before the drain. I use a pebble however I've never had a drain from that and I've been using it since Dec. Most of my apps are greenified including facebook, instagram, as well as all my music streaming apps. A lot of the google services I don't use are disabled like books/magazines/movies. I have snapchat, but I don't use it too much, and facebook messenger that I don't greenify. When I check GSam stats though, android system and kernel take the most battery, followed by music players if I was streaming music that day. The rest of the apps are way down the list.
I posted in the battery thread asking if anyone had the same problem with the wakelocks after having the latest google play services. I noticed mine is still 4.3 for some reason so I might just update manually from androidpolice and see if theres a difference. But yeah, I will keep this updated with todays logs.
Click to expand...
Click to collapse
Just run device only all the time, like everyone else does. It's a problem with Google's code, and the same bad coding is clearly seen throughout their entire app lineup.

Lokke9191 said:
Try this. Use titanium backup to uninstall Google play services and Google search. Then launch maps, and reinstall both from the play store.
Click to expand...
Click to collapse
What would that do though?
jj14 said:
This is what I ended up doing. You will need the secure settings plugin for tasker.
Set up a new profile for application "Maps".
When on, launch task GPS On (Secure settings, configuration GPS enabled)
Exit task, launch task GPS On (Secure settings, configuration GPS disabled)
I used the app factory to create an app for this, and use that on my N5 and my second phone too. Works great. Enables GPS when I launch Maps for navigation, and switches to battery saving when I exit Maps
Click to expand...
Click to collapse
Thanks! So, how would I set this up using device only/high accuracy? I'm also super new to tasker so if you don't mind I might PM you asking for help.
Aerowinder said:
Just run device only all the time, like everyone else does. It's a problem with Google's code, and the same bad coding is clearly seen throughout their entire app lineup.
Click to expand...
Click to collapse
Well, I actually like to use maps and google now. However, I don't actually need the location on when I'm not using either of the two services which is why I wanted to setup tasker.

It'll change them from being system apps to user apps. This has solved nlp wakelocks for many others experiencing the same problems.

PsychDrummer said:
Thanks! So, how would I set this up using device only/high accuracy? I'm also super new to tasker so if you don't mind I might PM you asking for help.
Click to expand...
Click to collapse
Sure.
It isn't that hard - install the secure settings plug in first, and when prompted, give it Superuser access. Then, create a new profile in tasker - call it whatever you want. Set up the profile for the application "Maps"
When Maps is launched, set it up to fire a new task (I called it GPS On) - this task just enables the GPS setting in the secure settings (under third party plugins)
GPS on -> high accuracy
GPS off -> battery saving mode
Set up an exit task (I called it GPS Off) - this turns the GPS settings in the secure settings off.
I can send you the apk if you want (but you don't really know me, so you probably shouldn't use an apk from a stranger! lol!), or you can try to import this attached xml into tasker (rename the file to remove the .txt extension - filename will be AutoGPS.prj.xml) - the xml option should be safe.
I haven't tried importing an xml, but it should be fairly straightforward (Save profiles in /sdcard/tasker/profiles and then, in tasker, long press the profiles "tab" and "import"). Before doing this, backup your existing profiles in tasker, just in case. Also, make sure you have secure settings set up before you import this.

jj14 said:
Sure.
It isn't that hard - install the secure settings plug in first, and when prompted, give it Superuser access. Then, create a new profile in tasker - call it whatever you want. Set up the profile for the application "Maps"
When Maps is launched, set it up to fire a new task (I called it GPS On) - this task just enables the GPS setting in the secure settings (under third party plugins)
GPS on -> high accuracy
GPS off -> battery saving mode
Set up an exit task (I called it GPS Off) - this turns the GPS settings in the secure settings off.
I can send you the apk if you want (but you don't really know me, so you probably shouldn't use an apk from a stranger! lol!), or you can try to import this attached xml into tasker (rename the file to remove the .txt extension - filename will be AutoGPS.prj.xml) - the xml option should be safe.
I haven't tried importing an xml, but it should be fairly straightforward (Save profiles in /sdcard/tasker/profiles and then, in tasker, long press the profiles "tab" and "import"). Before doing this, backup your existing profiles in tasker, just in case. Also, make sure you have secure settings set up before you import this.
Click to expand...
Click to collapse
Cool, thanks I will give it a try. And it would be the same if I want to have location on when using google search/now?

PsychDrummer said:
Cool, thanks I will give it a try. And it would be the same if I want to have location on when using google search/now?
Click to expand...
Click to collapse
Yes, it should be. But in my experience, I haven't found Google Search/Now really requiring high accuracy GPS level location for any of the features yet. It gets by fine with just battery saving mode. So, I only enabled this for the Maps application.
Actually, now that I think about it, I don't know how you'd enable it for Google Now - since it runs in the background to notify you about upcoming events. Since you aren't launching Google Now most of the times, I don't know how you'd set up Tasker to enable the high accuracy GPS for that (and it is possible that Google now using active GPS may be part of the battery drain issue - I don't know for sure)

jj14 said:
Yes, it should be. But in my experience, I haven't found Google Search/Now really requiring high accuracy GPS level location for any of the features yet. It gets by fine with just battery saving mode. So, I only enabled this for the Maps application.
Actually, now that I think about it, I don't know how you'd enable it for Google Now - since it runs in the background to notify you about upcoming events. Since you aren't launching Google Now most of the times, I don't know how you'd set up Tasker to enable the high accuracy GPS for that (and it is possible that Google now using active GPS may be part of the battery drain issue - I don't know for sure)
Click to expand...
Click to collapse
I actually wanted to keep the device on "device only" location instead of battery saving. For Google now I wanted the traffic card, but I would only need it if I physically open google now. I don't really need the notification.

PsychDrummer said:
I actually wanted to keep the device on "device only" location instead of battery saving. For Google now I wanted the traffic card, but I would only need it if I physically open google now. I don't really need the notification.
Click to expand...
Click to collapse
To keep device only, you should use Location mode (in secure settings) and set it to Device only or whatever you need, instead of GPS.
Note that "Device only" still uses active GPS and "This mode may use more battery power and take longer to determine your location" (Ref: https://support.google.com/nexus/answer/3467281?hl=en)
The traffic card still works on "battery saving" because it uses cellphone triangulation, and shows you the traffic in your vicinity, and based on your destination.

jj14 said:
To keep device only, you should use Location mode (in secure settings) and set it to Device only or whatever you need, instead of GPS.
Note that "Device only" still uses active GPS and "This mode may use more battery power and take longer to determine your location" (Ref: https://support.google.com/nexus/answer/3467281?hl=en)
The traffic card still works on "battery saving" because it uses cellphone triangulation, and shows you the traffic in your vicinity, and based on your destination.
Click to expand...
Click to collapse
I know, I have always used battery saving. The problem is that with battery saving, I'm having these extreme wakelocks and Google is constantly searching for my location which is what I think is the cause of the drain I'm having. I'm going to use my phone today by just using device-only location and see how the battery lasts. It should be much better since I'm hoping the phone will be deep sleeping longer. Basically, when I take my phone off the charger in the morning and I'm still at home for the first 2 hours of the day the standby time is great. It usually goes down 1-2% in those 2 hours even if I use the phone a little. However, once I leave the house is when I get constant wakelocks from location services and the battery stats to deplete a lot faster. I mean, I can still get through a day just because I don't use the screen a lot. I tend to only use about 1 hr 30 min on a regular day but I just want to play around with settings to see what works.If I can get the same standby time throughout the day that I get within the first two hours when im at home that would be great.

PsychDrummer said:
I know, I have always used battery saving. The problem is that with battery saving, I'm having these extreme wakelocks and Google is constantly searching for my location which is what I think is the cause of the drain I'm having. I'm going to use my phone today by just using device-only location and see how the battery lasts. It should be much better since I'm hoping the phone will be deep sleeping longer. Basically, when I take my phone off the charger in the morning and I'm still at home for the first 2 hours of the day the standby time is great. It usually goes down 1-2% in those 2 hours even if I use the phone a little. However, once I leave the house is when I get constant wakelocks from location services and the battery stats to deplete a lot faster. I mean, I can still get through a day just because I don't use the screen a lot. I tend to only use about 1 hr 30 min on a regular day but I just want to play around with settings to see what works.If I can get the same standby time throughout the day that I get within the first two hours when im at home that would be great.
Click to expand...
Click to collapse
That's strange. With battery saving mode, I get no wakelocks, which with device only or high accuracy, I used to get a lot of wakelocks by the location services.
But yes, no harm in trying out the options. Tasker+secure settings should be able to set up the battery saving or device only (as described above)

jj14 said:
That's strange. With battery saving mode, I get no wakelocks, which with device only or high accuracy, I used to get a lot of wakelocks by the location services.
But yes, no harm in trying out the options. Tasker+secure settings should be able to set up the battery saving or device only (as described above)
Click to expand...
Click to collapse
You get Npl wakelocks? So far I haven't gotten it and that's the wakelock that usually keeps my phone awake for 2 hours or so. basically, I think the way it works is that the device only setting uses more battery when using apps that use location such as maps but when the apps are not in use it uses no battery on location.

PsychDrummer said:
You get Npl wakelocks? So far I haven't gotten it and that's the wakelock that usually keeps my phone awake for 2 hours or so. basically, I think the way it works is that the device only setting uses more battery when using apps that use location such as maps but when the apps are not in use it uses no battery on location.
Click to expand...
Click to collapse
No. Ever since I switched to battery saving (and tasker toggling to high accuracy when I use maps), I have no location based wakelocks (no NPL wakelocks)

jj14 said:
No. Ever since I switched to battery saving (and tasker toggling to high accuracy when I use maps), I have no location based wakelocks (no NPL wakelocks)
Click to expand...
Click to collapse
Interesting, I've been having the opposite. I even took a screen shot of the wakelocks on the stock battery app where when the screen is off there's a huge amount of individual lines for awake (of course this is backed up by BBS). However when using device only the awake and screen on match almost perfectly.

PsychDrummer said:
Interesting, I've been having the opposite. I even took a screen shot of the wakelocks on the stock battery app where when the screen is off there's a huge amount of individual lines for awake (of course this is backed up by BBS). However when using device only the awake and screen on match almost perfectly.
Click to expand...
Click to collapse
Not sure why the difference, but regardless, as long as the individual 'fix' works, that's all that matters