SD Card Snafu--No System.img - Transformer TF300T Q&A, Help & Troubleshooting

Hi all,
recently, I was able to flash the new JB Hydro but it was stuck on the boot animation so I decided to do a full fresh install of a different rom, maybe CM10. Therefore via fastboot I wiped everything.
'fastboot erase recovery'
'fastboot erase boot'
'fastboot erase system'
'fastboot erase userdata'
Now, I figure I should be able to boot by flashing my system.img and boot.img
('fastboot flash recovery cwm.img'
'fastboot flash boot boot.img'
'fastboot flash system system.img')
I have CWM Recovery flashed already..buut, i am unable to flash the boot.img and system.img because I cannot find them..I mean when i extract the .zip to the fastboot folder all i have is a system folder, boot.blob and some META info..I flashed the boot.blob (fastboot flash boot boot.blob) but i cannot do the same for the system..So please tell me how I can flash the system.img...because I am unable to find the system.img (even via explorer)
Thanks in advance.

Related

Stuck in Bootloop

Trying to install the 5.1 factory image and can't seem to escape bootloop. I can't even seem to get into recovery post flash to do a factory reset. It's funny, because if I flash TWRP instead of stock recovery i can get into TWRP. However, the file structure isn't built out at all when i mount from there. I flashed using the following method:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot erase cache
Thoughts?
pearlbrian said:
Trying to install the 5.1 factory image and can't seem to escape bootloop. I can't even seem to get into recovery post flash to do a factory reset. It's funny, because if I flash TWRP instead of stock recovery i can get into TWRP. However, the file structure isn't built out at all when i mount from there. I flashed using the following method:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot erase cache
Thoughts?
Click to expand...
Click to collapse
Can you get to bootloader? If so, just flash the stock image using the flash-all.bat
Unfortunately the flash all file never works for me. It hangs up after it flashes the radio. I was at least able to do a factory reset, during which several cache errors popped up. Maybe that is the root cause of the trouble?
pearlbrian said:
Trying to install the 5.1 factory image and can't seem to escape bootloop. I can't even seem to get into recovery post flash to do a factory reset. It's funny, because if I flash TWRP instead of stock recovery i can get into TWRP. However, the file structure isn't built out at all when i mount from there. I flashed using the following method:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot erase cache
Thoughts?
Click to expand...
Click to collapse
You erased the cache after flashing it... System is checking for the cache and so the boot loop, try without erasing the cache(without executing the last line of code)

[Q] Bootloop after android M preview 2

I used (http://forum.xda-developers.com/google-nexus-5/development/rom-android-m-t3121186) this link to flash previw version 2 of Android M while I was on Android 5.1.1. I did not erase data before flashing. Used fastboot from MAC to flash new version Now my phone was stuck in bootloop. I tried to flash android L stock back but still in bootloop. Please help. I flashed TWRP recovery to erase data and cache but it says error cannot mount cache. please help.
buildsaurabh said:
I used (http://forum.xda-developers.com/google-nexus-5/development/rom-android-m-t3121186) this link to flash previw version 2 of Android M while I was on Android 5.1.1. I did not erase data before flashing. Used fastboot from MAC to flash new version Now my phone was stuck in bootloop. I tried to flash android L stock back but still in bootloop. Please help. I flashed TWRP recovery to erase data and cache but it says error cannot mount cache. please help.
Click to expand...
Click to collapse
I ran into the same issue, but found this solution:
First, flash the bootloader and the radio, and then reboot the bootloader (radio only applies to some devices):
fastboot flash bootloader <bootloader file name here>.img
fastboot flash radio <radio file name here>.img
fastboot reboot-bootloader
Flash the recovery, boot, system, and vendor images (vendor only applies to the Nexus 9):
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
Recommended: For a full wipe, flash cache and userdata as well (userdata only applies to some devices):
fastboot flash cache cache.img
fastboot flash userdata userdata.img
Reboot your device:
fastboot reboot
Credit: http://9to5google.com/2015/06/01/how...-nexus-player/
knG333 said:
I ran into the same issue, but found this solution:
First, flash the bootloader and the radio, and then reboot the bootloader (radio only applies to some devices):
fastboot flash bootloader <bootloader file name here>.img
fastboot flash radio <radio file name here>.img
fastboot reboot-bootloader
Flash the recovery, boot, system, and vendor images (vendor only applies to the Nexus 9):
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
Recommended: For a full wipe, flash cache and userdata as well (userdata only applies to some devices):
fastboot flash cache cache.img
fastboot flash userdata userdata.img
Reboot your device:
fastboot reboot
Credit: http://9to5google.com/2015/06/01/how...-nexus-player/
Click to expand...
Click to collapse
Hi,
Instead of linking the OP to an external resource, which has instructions for another device (hammerhead does not have a /vendor partition, for example), you could/should have linked him to http://forum.xda-developers.com/showthread.php?t=2513701
OP, stickies exist for a reason.
a hammerhead wrote this.

Not loaded in recovery mod

Not loaded in recovery mod.
I flashed through fastboot nv-recovery-st-wx-na-wf-4.1.0 firmware
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
In rekaveri does not go, the firmware is loaded.
I tried to flash twrp-3.0.2-2-shieldtablet.img, but also does not go into it. Just shows nvidia inscription.
What prompt do? It is necessary to go to recovery!
I flashed
nv-recovery-image-shield-tablet-factory.zip most original firmware.
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb tegra124-tn8-p1761-1270-a04-e-battery.dtb
I Nvidia after saying there's this
http://image.prntscr.com/image/64bb18f99d25468bb78aec67f7bd6fea.png
But it comes to recovery
http://image.prntscr.com/image/72805a63767148bab377a90d9b415623.png
everything is skewed
I flashed
twrp-2.8.7.0-shieldtablet
http://image.prntscr.com/image/836e3e3e40b94874b5a361a7f59d5b3b.png
What do I need to do?
I really need, if you not defective tablet (sent you to replace) 16 GB and a not new version of the tablet k1, please download the I
/dev/block/mmcblk0p24
If you have a version of the tablet with 16 GB and the battery b01, please copy me the file
/dev/block/mmcblk0p24 me it is very necessary. Without it, the tablet does not work.
PLS!!
It must be copied from the advanced> file manager from twrp

Need help to install stock ROM on Moto G 2013 Falcon

Hi guys,
Im from the UK and I have a Moto G XT1032 device which was running Cyanogenmod 12 up until yesterday when I decided to re-install the stock rom. Unfortunately, I have well and truly botched it. The current situation is that I have TWRP set up as the recovery image, so I can get into 'AP Fastboot Flash Mode (S)' OR into TWRP.
I accidentally wiped the 'system' via TWRP which seems to have caused most of my problems. I have tried to install the stock rom using a flashable zip (which failed) and I have also tried around 10 times to install the stock rom using the fastboot commands:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
#fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
When I try to do a basic wipe using TWRP, this is what shows up: hxxps://s27.postimg.org/r1dax21mb/falcon.jpg (change xx for tt, I don't yet have 10 posts so I cannot post links)
I just cannot seem to get the stock rom installed and booting no matter what I try. Can someone please work with me to get this sorted?
I would very, very much appreciate the help.
Thank you
Ok so i've managed to fix the 'unable to mount storage' issue via TWRP. I changed 'data' to EXT4 and I don't get any errors now.
But the problem is, for whatever reason, I am just unable to install a stock rom. I've used tutorials and still cannot seem to get a stock rom to load/work.
I used fastboot to install the rom files is this zip: XT1032_FALCON_TESCOGBSL_5.1_LPBS23.13-56-2_cid7_CFC.xml.zip
When I do a normal boot it gets stuck on 'Warning bootloader unlocked'
When I go to 'recovery', it boots up to a dead android which says 'no command'
When I go to factory restore, it gets stuck on the 'Warning bootloader unlocked' screen
What am I doing wrong?
edit: I even tried sideloading cyanogenmod and it said it was successful, but then it boots up to TWRP. Totally confused! In desperate need of help.
EDIT: I have now made progress. Here are my basic instructions:
put all the files from the zip file in a folder
put mfastboot.exe files into the same folder
install TWRP, erase
run bat file (add/remove sparse depending on files)
reboot and wait. Should work
I have managed to install the OS but wifi isn't working. And i'm now learning about a file called persist that I need to look into regarding wifi.

I cant flash userdata.img?

Im reverting back to android 6.0 for my k1
But when i go to flash userdata its says userdata isnt found
And i look in the zip and it wasnt there so i downloaded again and it still wasnt there any suggestions
1 more thing nvidias instrucrions say to
Fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
And rhats it do i reboot after blob?
Cause someone elses tutorial says to
fastboot flash recovery {dir}/recovery.img
fastboot flash boot {dir}/boot.img
fastboot flash system {dir}/system.img
fastboot flash userdata {dir}/userdata.img
fastboot flash staging {dir}/blob
fastboot flash dtb {dir}/tegra124-tn8-p1761-1270-a04-e-battery.dtb
Tjeres an extra command?
Which do i use?
Thx
Iceek1 said:
Im reverting back to android 6.0 for my k1
But when i go to flash userdata its says userdata isnt found
And i look in the zip and it wasnt there so i downloaded again and it still wasnt there any suggestions
1 more thing nvidias instrucrions say to
Fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
And rhats it do i reboot after blob?
Cause someone elses tutorial says to
fastboot flash recovery {dir}/recovery.img
fastboot flash boot {dir}/boot.img
fastboot flash system {dir}/system.img
fastboot flash userdata {dir}/userdata.img
fastboot flash staging {dir}/blob
fastboot flash dtb {dir}/tegra124-tn8-p1761-1270-a04-e-battery.dtb
Tjeres an extra command?
Which do i use?
Thx
Click to expand...
Click to collapse
Don't worry, that one isn't included in the latest Nougat builds as well and they still flash normally.
Just proceed without that

Categories

Resources