Hi,
I had baught flytouch 5 but once I recieved it, I only could find "Superpad" written on the box!!!. it is great in terms of the touch and wifi , browsing etc, but the arabic letters are displayed as disconnected, I know that is somehow will not be understood for the non-Arabic readers but, you can imagine that there is some thing wrong that makes the reading very very hard. Anyway, I started to google all the options, starting from installing a custom rom to just intall some fixes for the fonts or even font changers. but non of them worked out. the only methods left, are those that needs connecting the device to the PC , while I found there is no option in the device that changes the USB from a host to a device. and the PC does not recognize/ sens the tablet when it is connected. I had tried DSLR controller, but the device did not accept the installation. another trial with the USBcontrooler.apk also an error message that refuses the installation. I am really tired of this. Any help regarding either fixing the letters appearance or making the PC recognizing it will be highly appreciated. please if you have a solution try as much as you can to mention the details as I am totaly new to that staff .
Related
Hi everyone.
After much searching I seem to have got nowhere. Can someone please help.
My mda compact 2 starting playing up yesterday, rebooting on its own, so I tried to install the upgrade from tmobile (ruu charmer). The upgrader stopped and my mda now has a screen that only either says serial v1.02 or usb v1.02.
I've tried rebooting it several times in several different ways without any joy, the screen just remains the same. I tried connecting to my laptop via active sync, but its like it doesn't exist anymore!
I'm about to give up after hours of trying to fix it, so any assistance in very simple terms would be much appreciated!
problem solved
Seems like my problem must have been too basic or too common for anyone to bother to help, so I did some searching myself throughout this site and elsewhere.
However, what I found was thoroughly misleading and unhelpful.
The error messages are also inaccurate and totally misleading. Error 274 might mean pc can't connect to pda, but it also means other things, like your using the wrong upgrade firmware!!. Having serial v1.02 or usb v1.02 on your screen does not mean its a grey and black brick(useless), its simply the upgrade mode screen.
Basically, I made an error in choosing my upgrade. I chose the wrong firmware package from t-mobile thinking what I had was a mdacompact 2, when it actually was just a mda compact. This error was the main issue, yet from this forum I had the idea it could have been a number of things.
One important thing to remember is adhering to all the instructions regarding the installation of the new rom.
Don't bother unless you do the following:
1) Make sure you have a good connection via cradle or usb lead when doing the download.
2) Make sure you close all unnecessary programs on your pc.
3) Dont touch either your pc or the mda during installation.
4) Don't give up after you read misleading rubbish on the web.
5) Make sure you download from the web the correct upgrade firmware!!(very important in my case!)
6) Active sync is not totally necessary during the process.(I turned off usb connection in its setting during my installation).
Hey
I have the same Problem
i tried updating the software on the phone but now i get that screen..
Im still stuck on what exctly to do, I've been googling it for hours!! HELP!!!
matty x
I just traded my X1 for an x7510, but find many of the settings not reacting at all. It's apparently running a version of 6.5
USB to PC does nothing when clicked, along with various other settings such as Device Information and Format Microdrive.
I can't connect to my PC, so I can't even begin to sync or think about updating the ROM to something that might work again.
Does anyone have any useful tips how I could get this thing working again?
Go into bootloader, its camera button and reset. And it will work. Thats the whole points of a hard-spl...Make sure you have the correct drivers in windows.
...
Well, that's such an obvious solution I rightfully feel like a n00b now.
Thanks.
First off i live in New Zealand and i imported the captivate because i preferred it over the standard galaxy s phone we have over here.
Since i received it however i have noticed a few software issues which i am needing help with or wondering if theres a stock GT-i9000 rom?
The issues are as follows:
No Swype keyboard, came with 'Chinese keyboard'. i have sinced installed a keyboard form the marketplace
No Accelerometr/gyro. When trying to access game or apps that require it they say it cannot be detected. furthurmore i cannot put the phone into landscape mode when sending an SMS for example to flip the keyboard
The ambient light sensor and the proximity sensor are same as above, they either do not work or arent detected
The phone cannot connect to Kies or any computer in general. It worked once where i could access the external SD card through my computer, but when trying to get it to connect to any computer simply nothing happens, even when windows says its succesfully installed drivers it cannot find it.
As you can see thats alot of issues. It also crashes when i try to access 'mobile AP' in the settings menu. The phone came rooted without any samsung apps, widgets, wallpapers or anything else that it should have. There is also a app called 'superuser permission' which i believe is related to it being rooted?
So what i'm thinking the most logical choice is to somehow install android again, but with a fully functioning OS (e.g. accelerometer, swype etc). im not looking for anything fancy, preferably just stock andorid 2.1.
Since i cannot properly connect to a computer how would i backup all my data on it? And since its being used in New zealand, not america (its been unlocked) will doing this unlock it?
im sort of a noob at all this and haven't had any help from anyone yet.
P.S sorry if ive got spelling mistakes and what not, i wrote this in a rush before bed
Thanks,
Doctorwhobbc
I don't have the technical knowledge to help you that much with your inquiry.
It seems like your phone has a lot of problems with one you just imported. Are you sure that the place you got the phone from is reliable?
There are hundreds of threads around the web about this bluetooth issue but none of them seems to answer questions. So, here it goes;
The solution is so simple you won't believe it. (actually you will) The problem is PC not the phone.
Just keep installing the device. I had to remove/add device at least 20 times. At last it just gave up and some "installing driver software" box appeared. When you see this popup it means you've successfully beaten the computer.
It may happen again if you try to send files to your phone without enabling bluetooth.
You might also want to change your phones bluetooth name. This could be just a superstition of myself. I won't try it again just to test it
Hello all!
I have a windows 8.1 full tablet, I recently, I found that my touch suddenly stopped working, I thought it was because of the windows update, so I reformatted my tablet and the touch work again.
After several days, although I've disabled the auto-update, the problem came again. I looked at device manager and found that I2C HID device marked with yellow triangle. I googled it, nobody seems to know the exact cause, just bunch of assumptions.
At last, I found that it is a hardware problem, (maybe something is loose inside)
The easiest way to fix it (before costing money) is to go to device manager, uninstall the device, move the tablet a bit, and then scan for new device again. The touch should work again. You may have to repeat these steps several times. (using an external keyboard and mouse, of course.)
That's all. Hope this helps.