Database Info

Help Annoying ROM

1st things first complete noob i apologize for any stupidity in the following post. Right i have faria wm6 ROM on my phone it is unlocked and i did all the steps to installing as to the instructions on this forum. Now heres wots happening my device will not load past the boot screen where it says windows mobile unless i take the battery out, now i thought it might be because of the new american dst so i ran the microsoft cab to patch it up. Well no luck there i sync my time it lags so much so i take the battery out it resets to feb 2006 and it's fine. Also active sync is a pain when you click sync the bar comes up at the bottom and thats it no roatating arrows the softkey does not change to stop. Also when i configure my exchange it says message format and i can change to plain txt or html well wen i first used it i could change it to html but now its stuck on plain txt but i dont know whether thats a setting my exchange provider has to change on there sever - i dunno. But it all seems to revolve around active sync and the devices time. Please help or point me in the right direction because i would hate to go back to t-mobiles rom which is boring!
Any help much appreciated
P.S sorry if this has been posted many a time maybe looked in wrong place but plz post link.
Cheers Guys

dnlohara said:
1st things first complete noob i apologize for any stupidity in the following post. Right i have faria wm6 ROM on my phone it is unlocked and i did all the steps to installing as to the instructions on this forum. Now heres wots happening my device will not load past the boot screen where it says windows mobile unless i take the battery out, now i thought it might be because of the new american dst so i ran the microsoft cab to patch it up. Well no luck there i sync my time it lags so much so i take the battery out it resets to feb 2006 and it's fine. Also active sync is a pain when you click sync the bar comes up at the bottom and thats it no roatating arrows the softkey does not change to stop. Also when i configure my exchange it says message format and i can change to plain txt or html well wen i first used it i could change it to html but now its stuck on plain txt but i dont know whether thats a setting my exchange provider has to change on there sever - i dunno. But it all seems to revolve around active sync and the devices time. Please help or point me in the right direction because i would hate to go back to t-mobiles rom which is boring!
Any help much appreciated
P.S sorry if this has been posted many a time maybe looked in wrong place but plz post link.
Cheers Guys
Click to expand...
Click to collapse
This post makes no sense to me. First you say you can't boot past the 3rd splash screen (Windows MObile 6). Then you start talking about doing cab files and other stuff (which indicates you are past this screen and working on your device).
Please take a breath and give us more information and full details of exactly where you are at. You also have to tell us your current IPL, SPL, and OS versions that show when you boot the phone (we need exact numbers to be able to help). Is your phone a G3 or G4? What is the last / current ROM you have on your phone? Are you now able to get into your phone (ie: did you flash back)? Is your phone CID Unlocked?

Sorry for my confusing post. I am able to get past the boot screen if i take my battery out and put it back in but turning on normally It wont get past if you get what i mean. further explained below...
Heres my numbers: ipl is 2.21, spl 2.21 os 2.18 gsm 02.19.11 , it is CID unlocked, it was flashed to farias rom from t-mobiles latest rom. Ive flashed farias rom twice now going back to t-mobiles first in both instances.
The main problem i seem to get is with the devices time - i'll try to explain this as well as i can - if the devices time is set to now then it is really slow and active sync does not work and the today screen will only show the time and nothing else like messaging, live, tasks, calender etc. and if you reset the device it does not get past the boot screen. Taking the battery out therefore reseting the devices time it works great but changing the time back to now and it lags again. Hope you understand this
P.S. I have installed microsofts dst patch

dnlohara said:
Sorry for my confusing post. I am able to get past the boot screen if i take my battery out and put it back in but turning on normally It wont get past if you get what i mean. further explained below...
Heres my numbers: ipl is 2.21, spl 2.21 os 2.18 gsm 02.19.11 , it is CID unlocked, it was flashed to farias rom from t-mobiles latest rom. Ive flashed farias rom twice now going back to t-mobiles first in both instances.
Click to expand...
Click to collapse
I honestly don't know if this will help, but you might try flashing the latest TMobile US ROM to get you to 2.26 instead of 2.21
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Then flash Faria's over that. Note that the 2.26 ROM will put the 2.25 Radio on your phone. You may want to then get the 2.19 UK radio from the ftp site here and go back to that one (I find the 2.19 works better than the higher versions on WM6 for me).
Also (and maybe before doing what I just suggested) try either turning off BatteryStatus, or upgrading it to 1.04.201 Beta 3. There have been fixes and I had a lockup problem (I couldn't reboot my phone if the USB cord was plugged in and BatteryStatus 1.04.200 Beta 2 was running). I'll attach the cab to this post.
The main problem i seem to get is with the devices time - i'll try to explain this as well as i can - if the devices time is set to now then it is really slow and active sync does not work and the today screen will only show the time and nothing else like messaging, live, tasks, calender etc. and if you reset the device it does not get past the boot screen. Taking the battery out therefore reseting the devices time it works great but changing the time back to now and it lags again. Hope you understand this
Click to expand...
Click to collapse
Are you overclocking or anything? Have you installed other apps, or does it work this way right after installing Faria's WM6 rom?
Faria's WM6 ROM is very good and I've never seen stuff like this reported so it seems its something with your setup. You could try flashing the fixed mUn's ROM ( http://forum.xda-developers.com/showpost.php?p=1172977&postcount=361 ) and see if it behaves the same way. If it does then you have an issue with your phone it would seem. If it doesn't then its an interaction with software on the device.
P.S. I have installed microsofts dst patch
Click to expand...
Click to collapse
You don't have to install this on WM6.

Mda compact with serial v1.02 screen

Hi everyone.
After much searching I seem to have got nowhere. Can someone please help.
My mda compact 2 starting playing up yesterday, rebooting on its own, so I tried to install the upgrade from tmobile (ruu charmer). The upgrader stopped and my mda now has a screen that only either says serial v1.02 or usb v1.02.
I've tried rebooting it several times in several different ways without any joy, the screen just remains the same. I tried connecting to my laptop via active sync, but its like it doesn't exist anymore!
I'm about to give up after hours of trying to fix it, so any assistance in very simple terms would be much appreciated!

problem solved
Seems like my problem must have been too basic or too common for anyone to bother to help, so I did some searching myself throughout this site and elsewhere.
However, what I found was thoroughly misleading and unhelpful.
The error messages are also inaccurate and totally misleading. Error 274 might mean pc can't connect to pda, but it also means other things, like your using the wrong upgrade firmware!!. Having serial v1.02 or usb v1.02 on your screen does not mean its a grey and black brick(useless), its simply the upgrade mode screen.
Basically, I made an error in choosing my upgrade. I chose the wrong firmware package from t-mobile thinking what I had was a mdacompact 2, when it actually was just a mda compact. This error was the main issue, yet from this forum I had the idea it could have been a number of things.
One important thing to remember is adhering to all the instructions regarding the installation of the new rom.
Don't bother unless you do the following:
1) Make sure you have a good connection via cradle or usb lead when doing the download.
2) Make sure you close all unnecessary programs on your pc.
3) Dont touch either your pc or the mda during installation.
4) Don't give up after you read misleading rubbish on the web.
5) Make sure you download from the web the correct upgrade firmware!!(very important in my case!)
6) Active sync is not totally necessary during the process.(I turned off usb connection in its setting during my installation).

Hey
I have the same Problem
i tried updating the software on the phone but now i get that screen..
Im still stuck on what exctly to do, I've been googling it for hours!! HELP!!!
matty x

Cotulla,thank you for made the WM6.1 FOR HTC magican

Cotulla,thank you for made the WM6.1 FOR HTC magican.
I am a student from China.On 17th March,I saw a message in the BBS"口袋数码（in English means "PDAfans"）" showed that I could use my phone-Dopod 828+(=O2 XDA MINI) with WM6.1 ROM。There was a link in the message that connected to the ROM file.I couldn't imagine it is ture.I downloaded it quickly and freshed it from my PC to my phone.Really?MY GOD!It was working now!
I was very happy.But I found some problems:
1.The Activesync and Bluetooth was not working.
2.Not support Chinese.
I hope you can solve them in your next ROM version.
Cheer up！Please remember there are many Chinese users in your ROM's users.I'm stand for them to support you!I hope you can bring us more and more good ROMs.
Maybe my English is not very well,Please don't laugh.

ActiveSyncPatch
http://forum.xda-developers.com/showpost.php?p=3515963&postcount=473

Thank you,kaito.
Thank you,kaito.
And today I found another problem:
When I fresh the ROM into my phone and use it with 2 days,If I restart my phone, It will display a message on the screen :"The backup bettery's power is low."

er...
Sorry,the word "restart " in the above message is wrong,the correct one is"reboot".

liusiqi said:
Thank you,kaito.
And today I found another problem:
When I fresh the ROM into my phone and use it with 2 days,If I restart my phone, It will display a message on the screen :"The backup bettery's power is low."
Click to expand...
Click to collapse
i don't have the problem
maybe your backup bettery really have low power or will be breakdown
because 818 828...are 3 years ago. maybe the backup battery is too old.

thank you for your idea,coralpoyap
but when i hardreset my phone,the power message shows that the backup battery have 100 percent power.

[Q] HTC Mozart From Telstra stuck in a Demo mode??

Hi,
I've receieved a HTC Mozart as an evaluation device from Telstra for my company, but when I boot it up it does not seem to go through the normal setup process.
It boots and when it is pre-populated with some data such as contacts, text messages, emails, calander entries, etc. I have hard reset the device and it comes back to the same place after it goes through the loading process, at no stage am i prompted to enter my windows live ID or anything like that and there is already an example account present.
Is this some sort of demonstration mode the phone is set in???
Thanks,
Ryan

i would suggest contacting telstra? maybe they sent you a demo model by mistake? though to be honest if this was that case that would be one of the most funniest things they could do to a customer. it was just halloween? didn't you give them a treat?

The Gate Keeper said:
didn't you give them a treat?
Click to expand...
Click to collapse
We all know Sol took all the treats with him when he left LOL

Everytime i unlock the phone it get a text message that tells me welcome to windows phone 7 and the screen saver is a demo that says 'touch to begin' and I am unable to use my windows live login as there is an account called [email protected] that cannot be deleted and cannot be changed.

Try flashing the std ruu package from the mozart forum? Might have a demo rom on it.

Are you able to hard reset it?
If not then contact Telstra and they should replace it.

How do I install the generic RUU on the mozart? I have been a blackberry user previously.

Mate, dont bother, take it back to telstra.

otech said:
Mate, dont bother, take it back to telstra.
Click to expand...
Click to collapse
rybriggs said:
How do I install the generic RUU on the mozart? I have been a blackberry user previously.
Click to expand...
Click to collapse
rybriggs said:
Everytime i unlock the phone it get a text message that tells me welcome to windows phone 7 and the screen saver is a demo that says 'touch to begin' and I am unable to use my windows live login as there is an account called [email protected] that cannot be deleted and cannot be changed.
Click to expand...
Click to collapse
It Would seem not all people actually read the questions in these forums very well - having acquired one of these STORE DEMO ROM Mozarts as well I know exactly what you are saying - Mate - Check my post Under the Telstra ROM in the ROM section of Mozart Development Forum. Should be around post 3.
This is how I reflashed/unlocked from store demo mode and now have a fully functioning HTC Mozart.
Should help you out.

I believe i purchased a store demo HTC Surround, as it does exactly what you describe your mozart doing. I hope soon there will be a way to flash the rom because my battery dies from all the bogus updates and the screensaver or splash screen. any help would be greatly appreciated.

Yes, anyone here please plz plz plz help us out with this annoying thing ever. ....
GREAT GREATLY Appreciate ... it makes me piss off !!!

It's amazing how many of these demo phones make it out in the real world.

ngphucok said:
Yes, anyone here please plz plz plz help us out with this annoying thing ever. ....
GREAT GREATLY Appreciate ... it makes me piss off !!!
Click to expand...
Click to collapse
just flash a new rom http://forum.xda-developers.com/showthread.php?t=807801
Amsim said:
Through work aquired a Mozart with Telstra Demo(Store) Rom. Very furstrating as it wouldnt hold settings and kept playing that damn video.....
Downloaded this rom (following the links from here and trying a few download mirrors until I found one that worked)
Turned off Phone
Held Volume Down Key while Pressing Power Button (This turns the phone on and launched Bootloader)
Connected to PC Waited about 5 minutes while Windows auto detected the drivers and installed what it needed
Right Mouse clicked on the downloaded Rom and selected "Run as Administrator"
Followed the prompts.
****NOTE**** When it got to 10% the phone rebooted - LET IT!!!!! DO NOT TOUCH IT DO NOT DISCONNECT IT - Just wait -The computer will redetect and about 10 Min later VIOLA - All sorted nice and clean WP7 HTC Mozart (with a with Telstra One Hub - which aint that bad) - Whacked the 3 Sim card in - Downloaded Connection Setup Wizard from market place and a few minutes later was sending and receiving MMS etc
Thanks for the ROM
Click to expand...
Click to collapse

Same thing here, i got an optimus 7 (LG) though and there are no roms around so i can flash it. bummer...

Windows Phone 7 Error Code: C101002E

I have been having this error where the phone prevents itself from booting, showing a screen that tells you to connect to PC , for a while. Only way to fix it is to remove the battery and restart but that is just a temporary fix. What exactly is this? What causes it? Is it a software issue or a hardware issue? Should I get an exchange or do you guys think this will be fixed with the next update?
Thanks

Never seen that error message. I'd say reset once, if you see it again, get it exchanged.

Yea this my 4th HD7 it shows the error code when you plug it to the PC in zune. Funny thing is that I owned a speck case and I reboot the phone in the case till then. This time i pulled the battery out, put it back in and powered the phone on without the case and it is working fine. I guess the case is pushing down a button or sth and that prevents the phone from working properly. Very weird..

Hey there! I've been having the same error! This is my 2nd HD7, I own the Speck case and I do not think its the case. This issue is happening on mine with or without the case. Pulling out the battery just doesn't cut it. I have to:
1. Remove the battery
2. Plug the USB Charger
3. Insert the battery back
4. Turn on.
I love the phone but this is really frustrating!
Edit: Too bad I can't post the link to youtube due to member status. But the video is up just search for it "c101002e"

Just happened to me too. First day using the Speck case too and i let the battery drain till it died and upon reboot it showed the 'plug into computer' screen. Hope it is just the case causing problems.

did you all updated the sd card ?
you could try to reflash this rom (if you are on t-mobile USA ) http://forum.xda-developers.com/showthread.php?t=810346
Take this one "RUU_Schubert_TMOUS_1.20.531.01_Radio_5.51.09.11a_2 2.31.50.09_Signed_SCHUBERT_RELEASE"
its just the stock tmous rom .

Weird coincidence that all of y'all are using the same case. Maybe it is damaging on of the buttons?

nrfitchett4 said:
Weird coincidence that all of y'all are using the same case. Maybe it is damaging on of the buttons?
Click to expand...
Click to collapse
somewhere on the board they did tell that this case make the buttons really sensitive and it make the phone unusable .

theres a thread on tmobiles forums talking about the same issue, and most if not all the people there have the speck case. Someone says they tested it with and without the case and came to conclusion that the case is putting too much pressure on the camera button, which seems to be causing the problem.
would post the link to the other forum but i cant find it lol

pierce_m said:
theres a thread on tmobiles forums talking about the same issue, and most if not all the people there have the speck case. Someone says they tested it with and without the case and came to conclusion that the case is putting too much pressure on the camera button, which seems to be causing the problem.
would post the link to the other forum but i cant find it lol
Click to expand...
Click to collapse
Yea that was pretty much what was happening to mine. Although I remember trying to boot it without the case and having the same error before so what I did that I did a hard reset ( press power and both volume buttons at the same time) then when the phone booted, I rebooted it without the case immediately and its been working no problem since. I am pretty sure that case pushes the camera button since it grips the phone very tightly. I even overloaded the ram by opening lots of apps that runs in the background and then rebooted but it is working perfectly fine as of right now. Weird.. I am guessing its just a weird bug not a hardware defect.

I found it in a post in the mozart forums, so i tried it, as you do, cause its something new to play with cause my TP2 didnt like swimming, but anyway it was something about hoding down the camera button while power on, and it brought up a picture of a phone and cable and instructing you to plug it into a pc and when i did it started Zune and something about restoration error, so like in the previous posts it may be a stuck or faulty button somewhere on the phone that is causing it.
i didnt watch the video so if that had it in it never mind
cheers

Today 11 April 2011 I got notification about NoDo update for my phone.
It is HTC Mozart on Orange France network.
The pre-NoDo update was istalled about 20 days before.
The update got stuck at step 8. It seemed I had an unusable phone. In a periodic reboot mode into the update screen.
I checked on my W7 64 bit laptop the relevant backup folder, where all my phone data was supposed to have gotten backed up during the update. The folder was empty.
I therefore realized my phone got its rom corrupted during the update and I could not get back my pre-NoDo backup, since this latter was missing from my laptop.
Zune was on no help, stating a C101002E error.
The Windows Phone Support Tool was also of no use, reporting an error code while trying to restore my data.
XDA-forum provided me with a solution:
I went here
http://forum.xda-developers.com/showthread.php?t=1000781
and downloaded both bootloaders with relative roms.
After getting into the bootloader screen (red, green and blue screen), I installed the first ROM provided by Ansar. This could not install succesfully.
With the bootloader tool I could nevertheless confirm my idea I did not have anymore a functioning rom into my phone.
The second rom, the one ending with "Signed_by_ansar" could be succesfully installed.
I now have a Mozart fully functioning.
I had to restore my windows live account, Gmail, etc. My apps did not come back up after syncing with Zune.
I realized I just lost all my SMSs and home screen settings.
My phone was originally network unlocked and remained as such.
I got a notification that there is an official update for my phone the first time I rebooted. I will wait before attempting this update. The ROM by Ansar has got anyway copy/paste, being a NoDo ROM.
The ROM from Ansar, although for Orange France, removes the Orange splash screen when the phone starts. I guess if I need to use warranty on this phone right now I may have some issues with Orange France. Maybe when I update the phone following the update notification I got, I will re-establish a fully certified Orange ROM.

i9o pls and any one pls help me , i faced problem with [260] connection problem between my hd7 and pc vista 64 bit, actually i followed to steps in forum (error code C101002E) and drivers were installed (htc usb sync) before i started to flash rom NoDo bootloader 1, But no way still the problem [260]. i also tried another RUU htc asia xxx707xxx. because i have spl 1.23.2250.0(112138).also some links of RUU to download signed by ansar disappeared in rapid and other sourses, pls help to solve connection problem

Microsoft has release the Windows Phone Support Tool to fix this problem: http://support.microsoft.com/kb/2530409

WPS doesnt help in my case, Im malaysian and thought that need Asia RUU, but when i tried Europian RUU it nicely works, maybe because of i have 8G phone. the RRU is RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE(2)

day2die said:
Microsoft has release the Windows Phone Support Tool to fix this problem: http://support.microsoft.com/kb/2530409
Click to expand...
Click to collapse
Do you know what this tool does to the computer?
I would try it but honestly don't want to do it before I have info what it does to my PC settings. Unfortunately MS doesn't share with this knowledge.

Hi everyone!
I have a big problem with my new hd7.
Just bought, and wired for the very first charging but the phone continues to restart by itself.
Tried a hard reset, to set it in download mode and fix with Windows Phone Support Tool but still nothing to do. Even tried to install a new ROM but at the first start it continues with its loop.
In download mode zune tried to upgrade to nodo but it shows the error C101002E.
Don't know what else to do. Any idea? It's new!

MusicMan587 said:
Hi everyone!
I have a big problem with my new hd7.
Just bought, and wired for the very first charging but the phone continues to restart by itself.
Tried a hard reset, to set it in download mode and fix with Windows Phone Support Tool but still nothing to do. Even tried to install a new ROM but at the first start it continues with its loop.
In download mode zune tried to upgrade to nodo but it shows the error C101002E.
Don't know what else to do. Any idea? It's new!
Click to expand...
Click to collapse
No one had this problem? am i the only unlucky on the earth!?

Return for warranty replacement. Your phone is broken.

Thank you...i hoped i could solve it to not to wait september to have my phone back.