I found this thread which says it's gonna increase the battery life and got +ve results. I wonder if that's gonna work on atrix2 also. http://forum.xda-developers.com/showthread.php?t=1723259
Sent from my stock rooted Atrix2!
This should of been posted in the general section.
Sent from my MB865 using xda premium
Oh k.. Sorry
Sent from my stock rooted Atrix2!
Yes this will work on the atrix 2. The speed it up script is built in to SCv7.
Sent from my MB865 running CM10
Oh! so can I apply it on ma stock rooted Atrix2?
Sent from my Atrix2 still stuck on GB
Ashwasash said:
Oh! so can I apply it on ma stock rooted Atrix2?
Sent from my Atrix2 still stuck on GB
Click to expand...
Click to collapse
Yes, you can run the script on your stock rooted A2.
See the original thread with instructions on how to. It's a great utility.
See HERE.
Related
Hey ladies and gentlemen, I thought I'd share this piece of info for anyone that's unhappy with his/her Infuse due to performance/bug errors on the stock rom. I recently was feeling the same way until I did a full restore back to the stock build through recovery. This changed my Infuse experience 100%. My battery lasts about 2-3 times longer, and the phone has Zero lag. If you're having the issues I was after getting it stock from AT&T, I'd suggest trying this before becoming totally po'd with the phone. I'm not entirely sure what this fixed, but I did clear out the dalvik cache along with all the other info. Hope it helps!
Probably un-crufted RFS. That filesystem is known for performance degradation over time, hence Voodoo Lagfix for ext4 conversion.
Sent from my GT-P7510 using Tapatalk
So you are running 100% stock? And it has better battery than rom's......I dunno
Explain more. Like you did flash back to with ultimate unbrick or what
Sent from my SAMSUNG-SGH-I997 using xda premium
tyshemi said:
So you are running 100% stock? And it has better battery than rom's......I dunno
Explain more. Like you did flash back to with ultimate unbrick or what
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I have no experience with the custom Roms for the Infuse, but it's running faster than my old Nexus S now. Also, there was no flash involved. I just did the default recovery image located on the stock phone.
How'd you get to that?
Sent from my SAMSUNG-SGH-I997 using xda premium
tyshemi said:
How'd you get to that?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I rooted the phone, downloaded quickboot, got into recovery mode.
Rogue_Breaker said:
I rooted the phone, downloaded quickboot, got into recovery mode.
Click to expand...
Click to collapse
Nice so you went stock to stock per say? Lol
Sent from my SAMSUNG-SGH-I997 using xda premium
tyshemi said:
Nice so you went stock to stock per say? Lol
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Essentially, yes lol. I just wanted to put it out there though, because it really made a huge difference and may help out all those people with GB thirst because of performance and battery issues.
Rogue_Breaker said:
Essentially, yes lol. I just wanted to put it out there though, because it really made a huge difference and may help out all those people with GB thirst because of performance and battery issues.
Click to expand...
Click to collapse
Cool thank you.
Sent from my SAMSUNG-SGH-I997 using xda premium
Title says it all I need advice on the issue at hand since I don't want to brick and I'm looking to fxz then move to the ics leak, btw I'm rooted stock rom 2.3.6 if that helps
Sent from my MB865 using xda premium
atrix2noob said:
Title says it all I need advice on the issue at hand since I don't want to brick and I'm looking to fxz then move to the ics leak, btw I'm rooted stock rom 2.3.6 if that helps
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
The fxz back to anything (2.3.5/.6) will wipe all as is without checking anything. If it's the wrong fxz... then that's bad news - that's where bricks happen.
The leaked upgrade package has checks before it will install, so that is the one you want to worry about a clean system on - but it typically won't brick you, it'll just fail..
So, long story short.. no, beats audio will not affect the fxz flash - just don't reinstall it before you upgrade to ics..
Which 2.3.5 fxz do I use then because I see multiple
Sent from my MB865 using xda premium
Are you on AT&T? USA?
Sent from my SAMSUNG-SGH-I727 using xda premium
Yes at&t, usa
Sent from my MB865 using xda premium
atrix2noob said:
Yes at&t, usa
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
http://sbf.droid-developers.org/edison/list.php
The very bottom one (InlineFlashing_edison_5.5.175.25_cfc_p3_APBP.xml.zip) is the AT&T 2.3.6 fxz.
The 2nd from the bottom (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip) is the AT&T 2.3.5 fxz (you would need to use the 2.3.6 "replace" files from the beginner's thread with this one)
So use the 2.3.5 fxz (second one from the bottom and then ota to 2.3.6 then to ics leak?
Sent from my MB865 using xda premium
atrix2noob said:
So use the 2.3.5 fxz (second one from the bottom and then ota to 2.3.6 then to ics leak?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Either should work. But, the 2.3.6 fxz at the bottom will put you back to stock 2.3.6, so no need to go to 2.3.5 at all.. but your choice. I have used both. (But remember to replace the files first if you use the 2.3.5 fxz!)
Sent from my phone's mind
Okay and 2 questions will I need to sd card in when doing the fxz to 2.3.6? And is there any chance of my atrix 2 soft or hard bricking randomly during the process?
Sent from my MB865 using xda premium
atrix2noob said:
Okay and 2 questions will I need to sd card in when doing the fxz to 2.3.6? And is there any chance of my atrix 2 soft or hard bricking randomly during the process?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
No, I do not believe that you need the sdcard in.
And, sorry to say, but there is always a chance for something to go wrong.
A few things to make sure of before starting:
- make sure you have the right fxz for your phone (and replacement files if necessary)
- make sure you have the moto drivers installed on your comp
- make sure you have like at least 50%+ battery left
- make sure to use a rear USB port on your comp (or a very reliable one on your laptop - I got 3 on my laptop, only one works solidly)
- make sure you are patient and let the process completely finish
Sent from my phone's mind
Okay thanks and are these all the correct files I need for the fxz then upgrade?
Sent from my MB865 using xda premium
atrix2noob said:
Okay thanks and are these all the correct files I need for the fxz then upgrade?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
From the looks of things...yes, they look like the right files. You are on AT&T 2.3.6, and have never been on ICS yet, right? RSDLite has been updated to 5.7 though I think.. not sure if it matters or not.
Good luck, looks like you're on the right path... (insert standard "I'm not responsible.." disclaimer)
Sent from my phone's mind
alteredlikeness said:
From the looks of things...yes, they look like the right files. You are on AT&T 2.3.6, and have never been on ICS yet, right? RSDLite has been updated to 5.7 though I think.. not sure if it matters or not.
Good luck, looks like you're on the right path... (insert standard "I'm not responsible.." disclaimer)
Sent from my phone's mind
Click to expand...
Click to collapse
yes this is correct i'm stock rom rooted 2.3.6 at&t and ill update it just incase it does matter, thanks
I'm using the rom found in the development that is for people on leak one but it is the full experience of the official ota for att and was wondering if you could put the 1% mod on it? I am on ics by the way. Ans if you can flash it Kong or what.
Sent from my MB865 using xda premium
Kong isn't supposed to be there. My bad
Sent from my MB865 using xda premium
willyyumm27 said:
I'm using the rom found in the development that is for people on leak one but it is the full experience of the official ota for att and was wondering if you could put the 1% mod on it? I am on ics by the way. Ans if you can flash it Kong or what.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Just so you know the battery mods have already been developed by alteredlikeness all you have to do is to reodex them.there are instructions in the link below try and make use of them.
An alternative would be to simply deodex your stock ICS(trust me it isn't that hard) as the toggles for deodexed ICS are already out there.
See here
http://forum.xda-developers.com/showthread.php?p=32532817
Sent from my Atrix2 Stock ICS Leak#2 Rooted,Deodexed,With Google Now...
I am on rooted OTA ICS with bootmenu installed. ICS is on 1st system and I already did a full backup. How do I flash SCv7 and keep original ICS rom intact? I am guessing to install on 2nd system?
Figured it out! Works really well and super easy to switch between roms. SCv7 is lightweight and fast.
Sent from my MB865 using xda app-developers app
Waiting4MyAndroid said:
Figured it out! Works really well and super easy to switch between roms. SCv7 is lightweight and fast.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Glad you figured it out, I was about to bust on you form posting yet another identical topic
atrix2 running majicmod
galaxy tab 2 3113 running cm10.1 nightlys
iPhone 4 traded for some computer work... just sits there...
guys tellme if we can go back to gingerbread from ics,im presently on scv7 on 1st system..if yes sujjest a good bug free gb rom
Sent from my GT-I9100 using xda app-developers app
pp_prathap said:
guys tellme if we can go back to gingerbread from ics,im presently on scv7 on 1st system..if yes sujjest a good bug free gb rom
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Where you on ICS leak1 or leak2/ota before flashing scv7? If on leak1 then there is a way to revert back to GB. If on leak2/ota then you are stuck with ICS based roms.
Sent from my MB865 using xda app-developers app
Waiting4MyAndroid said:
Where you on ICS leak1 or leak2/ota before flashing scv7? If on leak1 then there is a way to revert back to GB. If on leak2/ota then you are stuck with ICS based roms.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
i installed scv7 from rooted ota ics
Sent from my GT-I9100 using xda app-developers app
pp_prathap said:
i installed scv7 from rooted ota ics
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I think since you are one OTA ICS you cannot revert back to GB.
pp_prathap said:
guys tellme if we can go back to gingerbread from ics,im presently on scv7 on 1st system..if yes sujjest a good bug free gb rom
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Is it an Indian MB865 Atrix 2, if yes then you can revert back to stock gingerbread or stock ICS using proper fxz script.
I know, because i was on the final ICS OTA, when my Atrix2 bootlooped and i had to FXZ back to GB 2.3.5.
Also, when my phone bootlooped with Cyanogen mod, i fxz back to stock ICS.
djabhi003 said:
Is it an Indian MB865 Atrix 2, if yes then you can revert back to stock gingerbread or stock ICS using proper fxz script.
I know, because i was on the final ICS OTA, when my Atrix2 bootlooped and i had to FXZ back to GB 2.3.5.
Also, when my phone bootlooped with Cyanogen mod, i fxz back to stock ICS.
Click to expand...
Click to collapse
yeah its indian atrix2 mb865
can you give me instruction how to go back to stock GB 2.3.5 ..thanks!
Sent from my GT-I9100 using xda app-developers app