Database Info

[Q] Root Creative ZiiO 7" Android 2.2

Hi, it is possible to root ZiiO tablet with Android 2.2 ?
I try with z4root 1.3.0 but is not working
Is there any other solutions ?

my friend's sister is working as a designer and user experience officer at creative. as far as her knowledge will carry her, the answer to root is NO

in any case, why did you wish to root it? even after you root it, it wun be able to perform up to anywhere normal tablets can

Thanks for the replay, i what root access to try to install Android Market ... do you think is possible?
coljuay said:
in any case, why did you wish to root it? even after you root it, it wun be able to perform up to anywhere normal tablets can
Click to expand...
Click to collapse

Solution
Just finished rooting this damn thing and it wasn't the easiest thing to figure out.
I used a 2 stage process.
Stage 1 (run superoneclick using the psneuter option until it fails)
If you're familiar with this skip to stage 2
get the adb driver from here
configure it to see the ziio using these instructions
get SuperOneClick from here
run it with psneuter root option selected until it stops and says FAILED
Explenation:
The ADB driver is needed for interacting with the tablet in a command line.
SuperOneClick comes with all you need to crack this baby. It loads the psneuter app which gives you temporary shell root and loads busybox on which is an app everybody and their grandmother uses.
Stage 2 (finishing what superoneclick can't)
Go to superoneclick's folder then in the Root folder you find there
Copy the su-v3 file to the adb folder (situated in Program Files/Android/android-sdk/platform-tools
Rename it to simply su
Start cmd and navigate to the adb folder
Use the following commands:
Code:
adb push su /sbin
adb install Superuser.apk
adb shell
chmod 4755 /sbin/su
rm /data/busybox/su
cp /data/local/tmp/busybox /data/busybox/busybox
chmod 4755 /data/busybox/busybox
exit
adb pull /system/ziilabs/init.rc
Open the new file in the adb folder named init.rc
Edit it and change the line
Code:
mount ext4 /dev/block/mmcblk_data1 /data nosuid nodev noatime nodiratime
with
Code:
mount ext4 /dev/block/mmcblk_data1 /data nodev noatime nodiratime
Save the file
Push it back to the ziio using
Code:
adb push init.rc /system/ziilabs/init.rc
Reboot the tablet and you should have root
Explanations:
SuperOneClick fails because it expects normal android file locations, which the ziio doesn't uses (probably to make it harder to root). All the files that are normally held in sbin apear to be in /data/busybox (weird). You have to delete the original su app, load the new su app in the /sbin directory where the superuser apk expects it to be, move the busybox application to the folder where the ziio has it's internal apps and allow it's use.
Thanks to CLShortFuse for superoneclick, to toolzz whose information gathering started me on this trail and thanks to mrrooty whose post here helped me figure out which su version I was suposed to use.

rooting too...
i try the guide and my ziio has now permanent root and android market working fine...

Im going to give it a try as soon as i can find out how to update the drivers in windows. Cant find the device in device manager on XP.
Any tips?
EDIT: OMG thanks so much it worked!! PS you need to shell root first or you cant adb push su /sdin

Thanks! It worked great on my Ziio 10 as well.

Thanks to linkerro!
I also have rooted my Ziio 7". But some additions by using Windows 7 for the guide i have:
1. Every programm (Editor, CMD, etc.) you need to start it as Administrator!
2. I added the file "adb_usb.ini" manually in %USERPROFILE%\.android
3. The Superuser.apk i have copied it manually to /sbin by using ADB
Dont forget to press the THANKS button ;-)
Thanks!

Thx for this Guide.
My ZiiO 10" was rooted and i had google apps alredy installed, but without a change file (/ system / ziilabs / init.rc) Now i edited it with totalcomander on my ziio.
Is this a 100% root pernament?
Work all the root only programs?
Anyone tested Chainfire 3d @ ziio ?

Thanks a lof for guide, i have only one problem with my ziio, i haven't notrification sound i app (gmail, facebook, talk, vCommunicator), it's some fix for this problem ?

help
I am stuck... I cannot get my ziio 7 to appear under adb..
On putting 'adb devices' under cmd it just shows 'List of devices'.. but the list is empty.

With a lot of persistence i finally managed to root and get the market running.
Initially my Ziio 7 did not show under abd devices as the file adb_usb.ini was non existing.. then i followed another thread "Tegra forum about adb-usb driver"...... which helped me create the above mentioned file.. and then got my ziio 7 to appear on the adb devices list.
and following this guide i got the root....but to get the markets and rest stuff installed i have followed the below mentioned guide.
"19300-ziio-shell-root-fully-working-android-market-ad-hoc-fix.html"

avathor said:
Thx for this Guide.
My ZiiO 10" was rooted and i had google apps alredy installed, but without a change file (/ system / ziilabs / init.rc) Now i edited it with totalcomander on my ziio.
Is this a 100% root pernament?
Work all the root only programs?
Anyone tested Chainfire 3d @ ziio ?
Click to expand...
Click to collapse
Yes it is full root, all root requiring apps working 100%

I just want android market, don't need root. Is it possible? how to?

i have full root now... thanks...

ROM Manager
In ROM Manager, which ROM should I choose? Without which, don't believe I can install Google market.

laverdone said:
i try the guide and my ziio has now permanent root and android market working fine...
Click to expand...
Click to collapse
@laverdone What method did you use to install the google apps?

thasan said:
@laverdone What method did you use to install the google apps?
Click to expand...
Click to collapse
guide to installing google apps:
After you have rooted or shell rooted your ziio
1. download rar with the apps from here (http:// www. megaupload .com/ ?d=QSM6ATPB)
2. unrar them into a directory (and rename them to something like googleApps so it's easier to work with)
3. delete app/SetupWizard.apk (you allready have this)
4. use adb to push the files to /data/googleApps (or any directory as long as it's not on the sdcard)
5. run chmod -R 755 /data/googleApps in the adb shell
6. copy the files to /system (cp -rf /data/googleApps/* /system)
7. clean up (rm -r /data/googleApps)

One more thing. The market doesn't see gmail and the other apps as installed so you have to get them again from the market if you want updates.

need help rooting flipside

i have a motorola flipside with 2.2.2 installed. somehow it lost its root and will not reroot z4root keeps shuting down and giving some odd error saying The application z4root (process com.z4mod.z4root) has stopped unexpectedly. Please try again and leaves only the option to force close the app. i left gingerbreak running all night and when i woke up it was still running not getting anywhere theyed superoneclick it will not finish im getting very fustrated with this phone i even went as far as asuming somthing on the phone went bad and flashed it to a stock att rom and still cannot get the root to finish and apply. is there some way i can mannualy root this phone? also yes usb debuging is on allow unknown aps to install is enabled

anyone please this dam phone is practicaly useless without a root to me id rather be using my stupid windows 7 phone at this rate because at least it had my ringtones and allowed me to use a different backround image than stock att ones.
---------- Post added at 02:09 PM ---------- Previous post was at 01:47 PM ----------
ok i have come accross this but i am a little lost at the steps
wiki.rootzwiki.com/index.php/Motorola_Flipside
it says to download 3 files psneuter busybox and super user unzip the downloads into the same folder. then it says to open a terminal and change to the folder i dont understand this what am i suposed to to? it then says i need android sdk installed and working witch i do i installed it for android screencast. then it says adb devices but does not say how im suposed to enter this command. after that im fairly sure its from the cmd entering the commands shown on that link. can anyone tell me how to get throgh the first few steps please?
copyed from link
Manual Root
[edit] Download
psneuter: Download
Superuser: Download
busybox: Download
Unzip the downloaded files into the same folder
Open a terminal and change to the folder.
You need the android SDK and ADB working. To make sure type:
adb devices
if your device lists, then you are ready to go!
[edit] Gain Root
Run the following commands:
adb push psneuter /data/local/temp/psneuter
adb shell
chmod 755 /data/local/temp/psneuter
./data/local/temp/psneuter
ADB should hang, wait a little while and then type:
adb shell
NOTE: You should have the "#" sign instead of the "$". If you do, you have temporary root, and can continue on.
Type:
exit
adb push busybox /data/local/temp/busybox
adb shell
chmod 755 /data/local/temp/busybox
./data/local/temp/busybox mount -o rw,remount /system
The last command should return nothing

update i learned how to do the procedure and finished sucesfully however the phone is still not rooted. i did reboot the phone after it seems faster now but not rooted.i downloaded the root checker app and scaned the phone it emailed me a log and here is that log
Root Access is not properly configured or was not granted.
Superuser.apk - com.noshufou.android.su - version 2.3.6.3 is installed!
System Environment PATH: /sbin /system/sbin /system/bin /system/xbin
The adb binary is set to default shell user access as a standard non-root user
Standard su binary location: ls -l /system/bin/su:
/system/bin/su: No such file or directory
Standard su binary location: ls -l /system/xbin/su:
/system/xbin/su: No such file or directory
Alternate su binary location: ls -l /sbin/su:
/sbin/su: Permission denied
Alternate su type binary location: ls -l /system/xbin/sudo:
/system/xbin/sudo: No such file or directory
SU binary not found or not operating properly
Results provided on your MB508 device by Root Checker version 3.7 from joeykrim in the Android Market

is it even posible to root this phone?

i guess im not allowed to be helped or somthing.

i have a procedure here that i had to build up from 2 seperate write ups. i had to use this one http://androidforums.com/droid-all-...oid-without-rsd-lite-up-including-frg83d.html along with this one together http://wiki.rootzwiki.com/index.php/Motorola_Flipside to get it to root properly.
here is what i did. u will need the downloads from both links for this to work i beleive. follow the steps from the second link to gain root once u get to where the number simbole is shown in the command line u need to switch to the instructions in link 1 and start at step 13 and follow to the end. this works to root your flipside when nothing els will work at least for me it did none of the apps that are suposed to root for you worked for me.
thank you me for having to figure this out on my own have fun

Problem rooting
I rooted my Flipside at its stock state and it worked fine. And then I upgraded my software to 2.2.2 Froyo and lost the root so now I am trying to reinstall z4root and re-root the phone but z4root now doesn't work. It gets successfully installed but when I hit PERMANENT ROOT it just stays in that window with the turning wheel and gets stuck there. It doesn't completely root. I've tried the hard reset by pulling the battery, and hitting the back key and forced closing it and then trying it again. Nothing works! HELP!

I once had a flipside. I rooted it the stock rom and then updated to gingerbread and then rooted again. I used superoneclick though. I'm not sure which version, but there is (or was) a flipside forum here on xda with documentation on the entire process.
Edit: here's the forum link: http://forum.xda-developers.com/forumdisplay.php?f=772

jovanphilip said:
I once had a flipside. I rooted it the stock rom and then updated to gingerbread and then rooted again. I used superoneclick though. I'm not sure which version, but there is (or was) a flipside forum here on xda with documentation on the entire process.
Edit: here's the forum link: http://forum.xda-developers.com/forumdisplay.php?f=772
Click to expand...
Click to collapse
Really? I thought the only upgrade I can do to it is from stock to Froyo. How'd you do that? I'm sorry. I am totally untechie. :/

[Q] How to root AigoPad M60

Someone can help me how to root aigopad m60?.. im already searching all over the net...
Thanks.

kickhopperX said:
Someone can help me how to root aigopad m60?.. im already searching all over the net...
Thanks.
Click to expand...
Click to collapse
There are two apps aimed at rooting Android devices: 'z4root' and 'superoneclick' but success with these is hit or miss. It's worth a shot
Sent from my SCH-R880 using xda app-developers app

kickhopperX said:
Someone can help me how to root aigopad m60?.. im already searching all over the net...
Thanks.
Click to expand...
Click to collapse
Hello kickhopperX
I also have a tablet aigopad m60 like you. this tablet is already rooter, you need just one application as ES Explorer which will allow you access to the tree (/).
I needed time to mount my sd card external sd card to the system.
One question: your tablet restarts all the time?
Good Day
Escuse me if I speak a little sore I use google translate to translate.

aigoPad m60
fariik said:
Hello kickhopperX
I also have a tablet aigopad m60 like you. this tablet is already rooter, you need just one application as ES Explorer which will allow you access to the tree (/).
I needed time to mount my sd card external sd card to the system.
One question: your tablet restarts all the time?
Good Day
Escuse me if I speak a little sore I use google translate to translate.
Click to expand...
Click to collapse
do you mean that it's already rooted ?
have you tried Directory Bind or SwapSD ?

i already tried z4root & super one click to root this device..both option won't work..please help us

I already found the solution guys!
Search 4Shared this apps :
DamNxQQr/doomlord_v1_xperia-2011-ics-ro

hoho.. thanks dude.. its working!!..
well... got custom rom for this tablet?..

its working ? how u do it ?
kickhopperX said:
hoho.. thanks dude.. its working!!..
well... got custom rom for this tablet?..
Click to expand...
Click to collapse
Not working with my aigopad m60 need help here cause Im dont know where to start
already have DamNxQQr/doomlord_v1_xperia-2011-ics-ro download to my PC and i have not install anything yet on aigopad m60
follow the instruction on runme(windows batch file) and when i run the batch it say " adb server is out of date " and " more the 1 device and emulator " then its say "complete
YAY!!!!! nothing happen

arerain86 said:
I already found the solution guys!
Search 4Shared this apps :
DamNxQQr/doomlord_v1_xperia-2011-ics-ro
Click to expand...
Click to collapse
I'm trying on my AigoPad M60, but not working

Here's how i did it.
Download and install moborobo.Launch the app and let it download the driver for m60.
once stabilize, unplug your tablet and reboot. on your dektop exit moborobo and kill the process. Reconnect tablet and execute runme.bat.
Let me know.
Thanks

[ROOT] [HOWTO] aigoPad M60 rooting script + generic su + generic usb driver
Hi.
I owned several aigoPad M60 bought from all over (to say it have slightly different ICS 4.0.3 revisions) and some I actually got them revisions by sending to service centre and flashed to a newer firmware.
Nevertheless, all of them can be rooted using this script (for Windows, 380 KB).
I actually rooted a Kindle Fire HD first using this script found on some chinese site (sorry I already forgot where I did so please pardon me for lack of credits). I cleaned up and englicised the whole thing, and updated the ADB tools to greater (and more compatible) version. Actually most ICS root scripts found everywhere are more or less the same.
So far, devices tested and succeded:
- Amazon Kindle Fire HD (ICS version)
- aigoPad M60 (ICS)
- Samsung Galaxy SII (GT-I9100 & GT-I9100G) ICS and Jellybean (works on mine, both phones and both 4.0.3 and 4.1.2)
- Chinese Samsung Galaxy SIII clone (can't explain much since it's a bootleg, it has MTK board) (ICS)
- Several other chinese tablets which somehow lose it's root or not rooted (ICS): Momo.cn 3G, AMPE, MaPaN. Sorry didn't remember it's exact models anymore.
This script contains a batch file, ADB exe file and two API libraries, and a generic su found in chinese tablets. The su works up to certain level but it is preferred to replace that with SuperSU from chainfire (Superuser from chainsdd didn't work well on these ICS chinese tablets, for me. Not sure about koushik's). Just install and when it asks to replace binary, choose normal and tap yes.
You have to have installed USB driver first. I have uploaded the compatible USB ADB driver for most chinese phones and tablets (8.5 MB, have to be split into x32 and x64 since the forum doesn't allow 8MB+ attachments, if you're not sure, download both and merge the folders, overwriting duplicate files).
Note: The driver works on Windows XP, 7 and 8. On Win 7 and 8 you will have to disable driver signature verify in order to install. (Win 7: Boot, F8, Disable signature. Win 8: Setting, Change PC Settings, General, Advanced Startup, look for Disable signature)
Those who already have ADB and drivers installed, here it is (simplified form of the actual script):
Windows (no need admin for ADB, just for driver installation):
Code:
adb wait-for-device
adb shell mv /data/local/tmp /data/local/tmp.bak
adb shell ln -s /data /data/local/tmp
adb reboot
adb wait-for-device
adb shell rm /data/local.prop
adb shell "echo \"ro.kernel.qemu=1\" > /data/local.prop"
adb reboot
adb wait-for-device
adb remount
adb push su /system/xbin/su
adb shell chown 0.0 /system/xbin/su
adb shell chmod 06755 /system/xbin/su
adb shell rm /data/local.prop
adb shell rm /data/local/tmp
adb shell mv /data/local/tmp.bak /data/local/tmp
adb reboot
adb kill-server
Linux:
Same
Tip: If you want to, you don't have to download anything. Just copy+paste the script. But make sure you have su in current directory. You can get chainfire's su from SuperSU.apk (assets\supersu.arm.png, rename it to su).
Careful though, this copy+paste script lacks safety measures compared to the one in the archive, such as it doesn't check if the rooting is a success or not, but the script inside archive will prompt you first before wiping /data/local/tmp ...
Note: What I mean by the su works 'up to certain level' is, it doesn't accept command lines such as su -c command. Also you will have to replace it with a proper superuser app (SuperSU, Superuser) if you want to use Titanium Backup, Lucky Patcher and so on...

i juz purchase one for my kids to play games and i google on how to root the aigopad m60, it took me here.
Many thanks for the guide, i succesfully root it.

[ROOT] $99 Walmart Nextbook 8 (NX008HD8G)

The Nextbook 8 (NX008HD8G) is a $99 tablet available from Walmart. It sports a AMLogic AML8726-MX SoC (1.5Ghz dualcore Cortex-A9 w/400mhz dualcore Malli400 GPU), 1 Gb of DDR3 RAM, 8" display, and 8Gb internal storage. Its a nice little budget tablet for those who don't need a Nexus 7 or greater performance rated tablet. Not too long ago I discovered how to root it and apparently I'm the first to do it as far as I can tell. Now here's how.
What you will need is Bin4ary's One Touch Root App. This app will get you only partial root via the ADB Shell. My guess is the ADB exploit he uses does work to get basic root access for ADB, but some incompatibility prevents proper installation of su & SuperUser.apk. What we're going to do is finish the job manually.
First run Bin4ary's app and use the Normal Method. Be sure to ignore all errors. After your tablet reboots move su and Superuser.apk from Bin4ry's app folder to the root of the Internal SDCard. Next you will need ADB. If you don't have it you can get it either from Bin4ary's app folder you found su & superuser.apk in or you can install the Android SDK. At the command prompt enter the following:
Code:
adb shell
su
At this point you should see a # sign indicating root privileges. If you do enter the following commands.
Code:
mv /system/xbin/su /system/xbin/osu
cp /sdcard/su /system/xbin
chmod 6755 /system/xbin/su
The use Astro or your favorite file manager to navigate to /sdcard and install SuperUser.apk then reboot your tablet. From here on you should have full root on your tablet. Credit should definitely goto Bin4ry for his work on his One Touch Root App for getting us half way there.

Confirmed Working
Confirmed. Works as described.
Nice work!

Thank you for this information, works excellent.

Ron Overdrive said:
The Nextbook 8 (NX008HD8G) is a $99 tablet available from Walmart. It sports a AMLogic AML8726-MX SoC (1.5Ghz dualcore Cortex-A9 w/400mhz dualcore Malli400 GPU), 1 Gb of DDR3 RAM, 8" display, and 8Gb internal storage. Its a nice little budget tablet for those who don't need a Nexus 7 or greater performance rated tablet. Not too long ago I discovered how to root it and apparently I'm the first to do it as far as I can tell. Now here's how.
What you will need is Bin4ary's One Touch Root App. This app will get you only partial root via the ADB Shell. My guess is the ADB exploit he uses does work to get basic root access for ADB, but some incompatibility prevents proper installation of su & SuperUser.apk. What we're going to do is finish the job manually.
First run Bin4ary's app and use the Normal Method. Be sure to ignore all errors. After your tablet reboots move su and Superuser.apk from Bin4ry's app folder to the root of the Internal SDCard. Next you will need ADB. If you don't have it you can get it either from Bin4ary's app folder you found su & superuser.apk in or you can install the Android SDK. At the command prompt enter the following:
Code:
adb shell
su
At this point you should see a # sign indicating root privileges. If you do enter the following commands.
Code:
mv /system/xbin/su /system/xbin/osu
cp /sdcard/su /system/xbin
chmod 6755 /system/xbin/su
The use Astro or your favorite file manager to navigate to /sdcard and install SuperUser.apk then reboot your tablet. From here on you should have full root on your tablet. Credit should definitely goto Bin4ry for his work on his One Touch Root App for getting us half way there.
Click to expand...
Click to collapse
Did NOT work for me.
1-On first attempt, got pound sign....tried to push code resulting in cant find SD
2-On second attempts, would not let me be superuser su
3-Did a factory reset....same results as (2)
Im stomped!....please help

Amlogic Next8HD8G (NX008HD8G) Modified Recovery - Stock Rom - Root & Gapps
Modified recovery, stock rom, flashable root and flashable Gapps here: http://www.freaktab.com/showthread.php?7010-Amlogic-Next8HD8G-%28NX008HD8G%29-Modified-Recovery-Stock-Rom-amp-Flashable-Root
ShaunMT

Confirmed as well..
Ty... no fusses at all..

zenkillizen said:
Ty... no fusses at all..
Click to expand...
Click to collapse
I need someone to be more clear on rooting this device because I already bricked one using the method from tab freaks instructions aren't that clear and I don't want to brick another one ! Please thanks

andrew09 said:
I need someone to be more clear on rooting this device because I already bricked one using the method from tab freaks instructions aren't that clear and I don't want to brick another one ! Please thanks
Click to expand...
Click to collapse
this guide is like the clearest root guide I've seen Just sit down and read it, take your time Rooting my seem hard at first, but you catch on

Aiko0923 said:
this guide is like the clearest root guide I've seen Just sit down and read it, take your time Rooting my seem hard at first, but you catch on
Click to expand...
Click to collapse
Parts are missing from the guide like how to install the adb drivers the computer needs to recognise the tablet first before u try and root it I have read through it and I've already bricked one also I noticed if you go to recovery on this tablet it erases the system and factory reset doesn't fix anything there's no factory ROMs or anything to fix it if it messes up. If someone can't a sure me that the method is correct I'll do it I'll try it.

Does this method work on the newer models say model number starting with YFG12 and up?

I bought this today.
I am having problems here:
I did what you said to do:
Normal Mode enabled!
Pushing busybox....
4806 KB/s (1165484 bytes in 0.236s)
Pushing su binary ....
7134 KB/s (104576 bytes in 0.014s)
Pushing Superuser app
6792 KB/s (2139595 bytes in 0.307s)
Making busybox runable ...
Now unlock your device and confirm the restore operation.
Please look at your device and click RESTORE!
If all is successful I will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
RunMe.sh: line 222: wait: pid 10 is not a child of this shell
Waiting for device to show up again....
RunMe.sh: line 225: wait: pid 10 is not a child of this shell
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
---
And then I copied the files su and the .apk to /sdcard
Then I try to run su, and it says:
su
/system/bin/sh: su: not found
so I do
[email protected]:/sdcard $ ./su
/system/bin/sh: ./su: can't execute: Permission denied
---
Other times, it just does this:
Now unlock your device and confirm the restore operation.
Please look at your device and click RESTORE!
If all is successful I will tell you, if not this shell will run forever.
Running ...
and it runs forever
what do I do?

http://www.cydiaimpactor.com/
Worked for me.

YES! use cydia impactor
H0wdy said:
http://www.cydiaimpactor.com/
Worked for me.
Click to expand...
Click to collapse
Yes, I used it also. worked for me too (my serial for the tablet is YF07... in case there is a problem with the newer versions)
Thanks, H0wdy
Steps to do it:
Download Cydia Impactor
Turn on USB debug in settings-> Developer options
Plug in tablet into PC (I used a 32 bit Windows 8.1)
Wait a while... a long while for me... for windows to download drivers, disconnect tablet, wait a few seconds, then reconnect.
you should see in the device manager (on the top) android phone and underneath Android Composite ADB interface
Unzip Cydia, run impactor.exe and just choose start for # drop SuperSU su to /system/xbin/su
Wait a bit, then you're done. (no reboot or anything else necessary).
Install supersu (or I guess any other superuser app) from the android market. It will tell you that you can update the su binary... your choice, I updated without a problem.
I had supersu installed beforehand, but I guess it has nothing to do with it, it wasn't working anyway)
Ranting, but maybe someone has this issue also:
One ( -- BIG --) problem I had was getting the connection between the tablet and my computer, and Not because I can't plug-in a cable
the tablet said it was connected, but on the computer, nothing showed up in device manager and the list of devices kept refreshing.
The PC was beep-ing just like it found a device. the device list would refresh once or twice, then again beep, all this till the end of my patience.
At first I thought it was the USB 3.0 port, then the cable, then the ESXi USB redirection (my desktop is actually a VM), then the windows version, then the architecture,
Then I switched to a laptop, nothing.. same story.
I can BET it's Sony's F***ed up drivers
So, I used a clean system (no other adb or phone drivers installed) and worked as a charm
I think I hat this much trouble because I had a lot of other drivers (for sony, samsung, universal adb, etc etc.)
So on the computer I had all this stuff installed, it looked like the tablet was connected, then disconnected in the space of 10-15 seconds, then repeat forever.
If this happens to you, use a clean windows.

[Working]Root Kindle Fire HD8 6th Gen

Ladies and Gentleman,
I was able to root the HD8 6th Gen using Kingoroot while in airplane mode. I download the executable and ran it directly from my computer. My Fire tablet is on version 5.3.1.1 and was never registered with Amazon. I can run su in adb but the SuperUser app is not working on my tablet. I am looking into replacing the KingoRoot SuperUser app with SuperSU. I suggest you block updates as soon as you achieve root.

look at this thread to see if you can remove Kingroot and replace
https://forum.xda-developers.com/am...rtool-root-t3272695/post69855730#post69855730
This applied to 7" but may be same issue you are having. Note I would suspect you at least need to install the app since you used the PC version but then that might allow replacement fully. The Rootjunky script basically installs supersu and removes the kingroot app following this approach: https://www.droidmen.com/remove-kingroot-kinguser-with-supersu/
So now the questions are:
* Does the app work too or just PC version
* Does a device which has been used and registered with Amazon work? I am on 5.3.1.1, have OTA disabled, have Novalauncher sort of working, and managed to get Amazon to disable the ads lock screen but right now the device does not leave home due to Opendns constraints as I did not want to lose 5.3.1.1 while waiting.

Decided to try this on 5.3.2.1, ran Kingroot for PC few times (version 3.4.0 build 1142). Did not work. Hope it works for you 5.3.1.1 guys.

I believe 5.3.2 can be downgraded to 5.3.1.1 but I also believe 5.3.2.1 is confirmed to not be downgradable.
I was lucky and got my BF unit with 5.3.1.1 and blocked OTA right away

I register to reply this thread and tell everyone that 5.3.1.1 CAN BE ROOT using KingoRoot(not KingRoot)
blocked OTA and planning to place Kingoroot with Supersu now.
go kingoapp.c0m(replace 0 with o) and download the PC one.
Tried APK one but seems stuck at 90% or not enough patient?
---------- Post added at 05:17 PM ---------- Previous post was at 05:12 PM ----------
chemie99 said:
look at this thread to see if you can remove Kingroot and replace
https://forum.xda-developers.com/am...rtool-root-t3272695/post69855730#post69855730
This applied to 7" but may be same issue you are having. Note I would suspect you at least need to install the app since you used the PC version but then that might allow replacement fully. The Rootjunky script basically installs supersu and removes the kingroot app following this approach: https://www.droidmen.com/remove-kingroot-kinguser-with-supersu/
So now the questions are:
* Does the app work too or just PC version
* Does a device which has been used and registered with Amazon work? I am on 5.3.1.1, have OTA disabled, have Novalauncher sort of working, and managed to get Amazon to disable the ads lock screen but right now the device does not leave home due to Opendns constraints as I did not want to lose 5.3.1.1 while waiting.
Click to expand...
Click to collapse
my device is registered with amazon and it works
Detailed instruction on post#38

so what is difference between
kingoroot
and kingroot
??
I am familiar with Kingroot but kingoroot seems to be another animal? Is kingo safe? We have a total of 3 lifetime posts from two accounts who are speaking its benefits....

chemie99 said:
so what is difference between
kingoroot
and kingroot
??
I am familiar with Kingroot but kingoroot seems to be another animal? Is kingo safe? We have a total of 3 lifetime posts from two accounts who are speaking its benefits....
Click to expand...
Click to collapse
honestly I dunno, I'm new to android, just bought the kindle to start playing with android...
but I found it difficult to replace the kingoroot with supersu, when I type su in terminal, it show nothing, can't give root permission to terminal emulator.

I replaced kingoroot with supersu following instruction from androidforums.com/threads/script-replace-kingoroot-with-supersu.919175/
After it's done, supersu doesn't prompt for root access. So I set 'default access' to 'grant' in supersu settings, and it seems to be working.

g4ry12 said:
Decided to try this on 5.3.2.1, ran Kingroot for PC few times.
Click to expand...
Click to collapse
I was not paying attention, it's KingoRoot, not KingRoot. Downloaded KingoRoot for PC (v1.4.9), and tried on 5.3.2.1. Rooting failed, unfortunately.

I ran the PC kingo and rooted.
I then tried to remove and replace with supersu and it failed
I lost root
I tried to rerun Kingo PC but it wanted debugging enabled even though it was
tried the apk kingo (from kingoapp.com; playstore it is a adware hack)
got stuck at 90%
exited and kindle was really sluggish; maybe something to do with my novalauncher or something?
power off reboot and stuck in boot up (Fire image). Now can't boot.
Message is be careful with kingo when removing....will try restore now.
Edit: wiping data and cache did not help. Did brick recovery to 5.3.1.1 (which is what it was on when I got it), and managed to recover. Glad I don't have to send this one back to Amazon!
I will now restart kingo root effort and if it works will report back steps (including supersu replacement).

So I have root according to kingo but "root checker basic" says I do not have root.
Try to open "superuser" (which is a kingo superuser app) and it is just a blank screen then back to Home.
The removal tool that @2ig2ag linked did not work.
It failed on "mount -w -o remount /system" with "mount: operation not permitted"
I also tried to manual cp the su file over and get error "read only file system"
Edit: Despite kingo saying you have root, you don't. At least not complete root. I am unable to copy anything into system/app via ES File explorer too. I am unable to grant programs that want access, that access. For example, Titanium BackUp is unable to detect "Su and Busybox" so no go.
I am able to pm disable the firelauncher for example but that is about it

chemie99 said:
So I have root according to kingo but "root checker basic" says I do not have root.
Try to open "superuser" (which is a kingo superuser app) and it is just a blank screen then back to Home.
The removal tool that @2ig2ag linked did not work.
It failed on "mount -w -o remount /system" with "mount: operation not permitted"
I also tried to manual cp the su file over and get error "read only file system"
Edit: Despite kingo saying you have root, you don't. At least not complete root. I am unable to copy anything into system/app via ES File explorer too. I am unable to grant programs that want access, that access. I am able to pm disable the firelauncher for example but that is about it
Click to expand...
Click to collapse
I soft-bricked once, stuck at fire logo, sideload adb and resumed normal.
I didn't use the root checker to check, the superuser included will crash when I launch it,
but I can su in adb shell..
@2ig2ag's way not work for me either,
I cannot run the script, it said permission denied, then I try to run it manually,
I can remount /system, it do not show any error, but I am stopped at "cp ./su /system/xbin/daemonsu",
it said "daemonsu" text file in use.

tried ultra explorer as another way to get to /system and it just locks up when trying to detect root.
Tried manually installing supersu.apk and it locks up and requires reboot to get back to working device.
@phpbb88 I retried "mount -w -o remount /system" and it worked; maybe I wasn't in su at the time. I get the same error on file copy
So to summarize:
you can: adb su
you can: pm disable fire launcher and OTA (not sure if unrooted allows this too?)
you can not:
write to /system
install any apk that require root and grant root access
switch to supersu
adb remount (fails)
I would not call this a successful root. I am not even sure of the pm disables will last more than 24 hours.

chemie99 said:
tried ultra explorer as another way to get to /system and it just locks up when trying to detect root.
Tried manually installing supersu.apk and it locks up and requires reboot to get back to working device.
@phpbb88 I retried "mount -w -o remount /system" and it worked; maybe I wasn't in su at the time. I get the same error on file copy
So to summarize:
you can: adb su
you can: pm disable fire launcher and OTA (not sure if unrooted allows this too?)
you can not:
write to /system
install any apk that require root and grant root access
switch to supersu
adb remount (fails)
I would not call this a successful root. I am not even sure of the pm disables will last more than 24 hours.
Click to expand...
Click to collapse
I am using a file explorer called "ES File explorer", it cannot view the system file when it is not root.
After Kingoroot, I can view them, but I still cannot create file in /system by using that File explorer.
However I can successfully create a dir in /system in adb shell, shown below.
[email protected]:/system # mkdir 123
[email protected]:/system # ls
123
app
bin
build.prop
data
etc
fonts
framework
lib
lib64
lost+found
media
priv-app
recovery-from-boot.p
sbin
security
sqfs
tts
usr
vendor
xbin
[email protected]:/system #

I have made progress...with kingo install I did this:
copy the files of the kingo root removal to sdcard/kingo
adb shell
su
mount -w -o remount /system
cd /sdcard/kingo
cp ./su /system/xbin/daemonsu
fails because it is locked. Then I started to think that the steps were for the kingo app and not the PC so
with adb window still open, run PC program and remove root
then
cp ./su /system/xbin/daemonsu
chmod 0755 /system/xbin/daemonsu
daemonsu -d &
./step1.sh
got some errors
then sideload the supersu apk via ES file explorer
then allow supersu to do it thing and reboot.
Now I have supersu running!''
edit:
but do I have root?
Titanium backup still fails but ultra explorer does say it has root
now adb shell su fails.....

chemie99 said:
I have made progress...with kingo install I did this:
copy the files of the kingo root removal to sdcard/kingo
adb shell
su
mount -w -o remount /system
cd /sdcard/kingo
cp ./su /system/xbin/daemonsu
fails because it is locked. Then I started to think that the steps were for the kingo app and not the PC so
with adb window still open, run PC program and remove root
then
cp ./su /system/xbin/daemonsu
chmod 0755 /system/xbin/daemonsu
daemonsu -d &
./step1.sh
got some errors
then sideload the supersu apk via ES file explorer
then allow supersu to do it thing and reboot.
Now I have root with supersu!
Titanium backup still fails but ultra explorer does say it has root
Edit: hmmm..
now adb shell su fails.....
Click to expand...
Click to collapse
I cannot run the step1.sh, still show permission denied.
I tried manually, but got another permission error...
[email protected]:/sdcard/Kingo # cp ./su /system/xbin/daemonsu
[email protected]:/sdcard/Kingo # chmod 0755 /system/xbin/daemonsu
[email protected]:/sdcard/Kingo # daemonsu -d &
[1] 8434
[email protected]:/sdcard/Kingo # ./step1.sh
sh: ./step1.sh: can't execute: Permission denied
[1] + Done daemonsu -d
126|[email protected]:/sdcard/Kingo # cp ./su /system/xbin/su
[email protected]:/sdcard/Kingo # chmod 0755 /system/xbin/su
[email protected]:/sdcard/Kingo # ./chattr.pie -ia /system/xbin/ku.sud
sh: ./chattr.pie: can't execute: Permission denied
126|[email protected]:/sdcard/Kingo # ./chattr.pie -ia /system/xbin/supolicy
sh: ./chattr.pie: can't execute: Permission denied
126|[email protected]:/sdcard/Kingo #

after the errors, did you install supersu.apk?
I ignored the errors thinking they were from differences between kingo apk and kingo PC versions of what they put on device.
Supersu does manage to install itself but root checker still says I do not have root.

chemie99 said:
after the errors, did you install supersu.apk?
I ignored the errors thinking they were from differences between kingo apk and kingo PC versions of what they put on device
Click to expand...
Click to collapse
I didn't finish all the steps in step1.sh, cause I have installed SuperSU at the beginning of time,
I then try to run Supersu and it said blahblahblah error, need to reboot my device.
wola, i lost my connection to root adb shell, and now going to root it again

phpbb88 said:
I didn't finish all the steps in step1.sh, cause I have installed SuperSU at the beginning of time,
I then try to run Supersu and it said blahblahblah error, need to reboot my device.
wola, i lost my connection to root adb shell, and now going to root it again
Click to expand...
Click to collapse
I only install supersu as the step after running step1; it worked, and took hold (at least no errors and opening the program looks normal). The issue is that it won't grant access to anything (TB, flashfire, etc)

chemie99 said:
I only install supersu as the step after running step1; it worked, and took hold (at least no errors and opening the program looks normal). The issue is that it won't grant access to anything (TB, flashfire, etc)
Click to expand...
Click to collapse
Kingoroot PC asked me to grant root access to it by pressing OK on my device's pop up when my device is under root,
but my device wouldn't show anything.
Is there any problem on fire OS that wouldn't show this pop up?