Database Info

Recovery console

Hey guys, here is the deal. I did toasts instructions but forgot to wipe the cache/data so it was just looping along the 4g screen. So I reboot using volume down key and reflash the original PC36IMG.zip, then I do "adb reboot recover" and restore my nandroid backup. Now I can't connect to my phone with my computer in any way. I can reboot using volume down and go to recovery, but when I try to run the script (I'm on a mac, so I'm running recovery-mac.sh) it just says "error: device not found". Furthermore, if I boot back in to android and try to send the "adb reboot recover" command from my macbook I get the same error. Any ideas?

For the record I have installed the SDK.
Also, I've just noticed that it won't even charge when plugged in to my macbook or my girlfriends win7 machine.

sambow said:
For the record I have installed the SDK.
Also, I've just noticed that it won't even charge when plugged in to my macbook or my girlfriends win7 machine.
Click to expand...
Click to collapse
ive only briefly played with the phone. i noticed settings to tell it what action to take when connected via USB. perhaps review these settings, also make sure ADB is turned on in the applications, usb debugging section.
this should at least get you a USB connection in normal android mode.
if you flash the userdebug RUU PC36IMG.zip and reboot into recovery, adb connection should work, otherwise something is wrong and i dont think its the software on the EVO because it seems to work fine for everybody else. perhaps try plugging/unplugging USB, switching USB ports, etc, the usual troubleshooting steps.
let us know how it works out!

No luck, I even tried the exe to reflash to stock (ran while HTC logo was up) and that was a no go.
Any more ideas?

Try a different USB cable. I had a cable suddenly go out on me, and wouldn't charge or act anything like a USB cable should. This was 'not' a cable that came with an EVO... but, worth a shot.

Did I completely mess up my Captivate?

So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.

I pull out my battery and let it discharge for about 15 secs and hold volume buttons then connect USB cable and finally insert battery while still holding volume buttons of course, it'll get you into download mode. Never failed me. I've had my phone not even turn on the screen, it stays dark during a screwed up flash with odin. I then flash UCKI2 with bootloaders and then flash to gingerbread ROM I like. If you plan on installing custom ROMs your phone will semi-brick numerous times. If its showing a phone, exclamation mark and computer with a message saying firmware flashing failed. That is perfect! Just make sure you have Samsung USB drivers and simply flash using odin, it'll show COM and a number like 5 (COM5) then just flash. I'd advise you to remove any external SD card and restart before using odin it acts up. Hope this helps

hupo224 said:
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
Click to expand...
Click to collapse
The "Phone - ! - PC" will be your download mode screen. Just download from there.

However, if a flash goes foul somehow, you may be left with the infamous "phone--/!\--PC" screen.
If you see this, don't panic. Although it's not technically the download mode screen, many users (including myself) have been able to successfully flash from that screen. Give it a try.
Click to expand...
Click to collapse
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.

asasione said:
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
Click to expand...
Click to collapse
100% - I had similar experience with my first flash but after a few goes at it and 3 or 4 "soft-bricks" all has been great!

Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..

It seems I got it in download mode this morning with the jig. Just trying to get my damn pc to read it. Sometimes the right drivers work sometimes they don't. ugh

Connection issue in my sig

Any chance you have another pc to try it with? Or possibly another cable?

Going to try one click on ubuntu...

Ive had issues in the past before with certain USB ports on my PC not reading the phone.
Try plunging in your phone to a different USB port and it can make a world of difference with the driver issue (even if you have to plug it in the back of your PC).

try one click unbrick in the android development page

hupo224 said:
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
Click to expand...
Click to collapse
Are you running x64? If so are you running the 64 bit drivers?

I also had the same issue a couple of times, which is technically called a "soft brick" . You could resolve this issue using ODIN flasher and reverting back to stock. Now coming to USB problem in windows, this is a known issue with windows (especially Vista and Win7) and samsung!! The remedy which I found is as follows :-
1.Disconnect the phone from USB
2.Remove samsung USB driver software from your windows PC.
3.Reboot and then navigate to C:\Program Files\ (assuming that C:\ is your windows OS partition)
Delete "samsung" folder.
4.Download latest samsung USB Drivers for captivate and install.
5.Reboot the phone.
6.Open ODIN and connect your Phone to PC.
It should detect the COM Port by now. Try this and get back
"Thanks" , If I helped U

"Key Driver Not Found.. " on Bootloader 4.2.1

So this morning my brother was using his TF300T in its dock. He undocked it and the screen went blank. Screen was still on but nothing displayed. I rebooted it for him (volume down and power button for 10s). After a minute of it powered on the screen went blank again, so I rebooted it again, but this time the Asus splash screen displays and the lock screen flickers before quickly going blank.
Thought a reinstall of the ROM would fix the problem but I now can't even boot into recovery or fastboot! Had no problem the first time I rebooted and selected cold-boot in the bootloader options. With the tablet on and screen blank I plugged it into a PC and Win7 detected and installed the proper drivers (I think). ADB commands seem to work, but the command to boot into bootloader only resets the tablet. Fastboot command does not work. Also noticed the below message flash before a flicker of bootloader options are shown. The PC seems to have access to the internal storage (I can see folders from the tablet) when plugged in via USB.
"Key driver not found.. Booting OS
Android cardhu-user bootloader <2.00 e> released by "US_ePad-10.6.1.8-20130PPt" A03"
Could it be a hardware issue? I ask because I see similar problems with the Asus splash screen indicative of a logic board problem when diagnosing a PC (images pixelated)...

MaMMiTs said:
So this morning my brother was using his TF300T in its dock. He undocked it and the screen went blank. Screen was still on but nothing displayed. I rebooted it for him (volume down and power button for 10s). After a minute of it powered on the screen went blank again, so I rebooted it again, but this time the Asus splash screen displays and the lock screen flickers before quickly going blank.
Thought a reinstall of the ROM would fix the problem but I now can't even boot into recovery or fastboot! Had no problem the first time I rebooted and selected cold-boot in the bootloader options. With the tablet on and screen blank I plugged it into a PC and Win7 detected and installed the proper drivers (I think). ADB commands seem to work, but the command to boot into bootloader only resets the tablet. Fastboot command does not work. Also noticed the below message flash before a flicker of bootloader options are shown. The PC seems to have access to the internal storage (I can see folders from the tablet) when plugged in via USB.
"Key driver not found.. Booting OS
Android cardhu-user bootloader <2.00 e> released by "US_ePad-10.6.1.8-20130PPt" A03"
Could it be a hardware issue? I ask because I see similar problems with the Asus splash screen indicative of a logic board problem when diagnosing a PC (images pixelated)...
Click to expand...
Click to collapse
It is unlikely windows installed the proper drivers for adb and fastboot. The drivers for accessing the internal sdcard yes.
See my signature for installing proper drivers in windows 7 and another for entering the bootloader after you have the proper drivers.
When I have seen that message it does not relate to hardware but software.
I don't suggest plugging and unplugging the dock when powered.

tobdaryl said:
It is unlikely windows installed the proper drivers for adb and fastboot. The drivers for accessing the internal sdcard yes.
See my signature for installing proper drivers in windows 7 and another for entering the bootloader after you have the proper drivers.
When I have seen that message it does not relate to hardware but software.
I don't suggest plugging and unplugging the dock when powered.
Click to expand...
Click to collapse
Will try what you suggested, but does it matter that I'm using the same PC I used to initially fastboot TWRP to the tablet? I thought once the driver is installed it there would be no need to re-install the driver...

MaMMiTs said:
Will try what you suggested, but does it matter that I'm using the same PC I used to initially fastboot TWRP to the tablet? I thought once the driver is installed it there would be no need to re-install the driver...
Click to expand...
Click to collapse
It will probably be ok. I was going by your comment "I plugged it into a PC and Win7 detected and installed the proper drivers (I think)"

tobdaryl said:
It will probably be ok. I was going by your comment "I plugged it into a PC and Win7 detected and installed the proper drivers (I think)"
Click to expand...
Click to collapse
Yeah. My problem is I can't get to fastboot mode on the tablet itself, and based on what I saw on another thread it seems like I'm going to have to replace the mainboard .

MaMMiTs said:
Yeah. My problem is I can't get to fastboot mode on the tablet itself, and based on what I saw on another thread it seems like I'm going to have to replace the mainboard .
Click to expand...
Click to collapse
OK.
Good Luck!

I unplug mine and reconnect all the time when on. Never had a issue.
Sent from magical jelly bean.

My brother's TF300T is back up and running!
As a last resort I opened it up to disconnect the battery. Still could not get into fastboot, so I left the battery plugged in and let the battery run out. After 48 hours of the battery being completely dead I charged it fully to see if I could do anything. Battery LED indicator was green and the first thing I noticed was that the unit was still off. (I wasn't able to completely shut it down before letting the battery completely drain). I powered it on thinking it would display a blank screen, but it powered up as usual! Everything seems to be working. I immediately flashed CROMI-X 4.3b6 on it (what my brother originally wanted me to do).
Thought I'd post this as a last resort hope for those who think they may have bricked their machine. I do recall completely draining the battery then waiting over 24 hours as a solution for one of the many machines I've hacked. Just thought disconnecting the battery would achieve the same purpose. Guess I was wrong . Hopefully this is a solution for someone else out there who may have bricked their machine. Sure doesn't hurt to try .
I'm actually mystified as to why this worked. Anyone know? I'm guessing completely draining the battery reset whatever was inside. I also have noticed more users have reportedly bricked their machines after Android 4.2.1. Coincidental? Thank God I'm perfectly happy with Android 4.1.1 based CROMI v3.4.6 .

[Q] [How-To Root] video removed-- help!

Sorry all for those who read my last post in my other thread - "can't root- twrp not working" which makes this post redundant but I'm feeling a little desperate and I'm also new to this stuff. Since I was unable to install TWRP for some reason it was advised I use the old fashioned NV flash method with prime rom, however 'how to' video from the following thread- http://www.tabletroms.com/forums/tr...ment/976-nvflash-unbricking-forever-root.html
has been removed and now I'm stuck with this message on my tablet :
entering nv flash recovery mode/nv3p server
chip vid ----
I hope this doesn't mean I bricked "permanently mt tf101. I've completed the following 3 steps to get this far:
downloaded nvflash zip and prime 1.4.
1 Connect cable to computer and turn device on while holding down Volume Up. Screen will stay off, but USB will come on.
2 (Windows only) Find “APX” device in Device manager and update driver, then point it at usbpcdriver directory from the zip
3 Run download.sh (linux) or download.bat (windows)
In step 2 - driver wouldn't take I presume since I already updated driver when using frederuco's guide. Shouild I have uninstalled APX and reinstalled this version?
Anyhow, after step 3 allot of messages about partioning came up on tablet and now there is the entering nvf flash recovery mode message stuck on tablet screen. Is this right? Am I supposed to flash prime 104 now? If so how? I was advised to install this way as a back door if you will so as I can later install a better rom once I've successfully rooted.

The tablet will reboot when NVFlash is finished, you should be able to follow its progress on the PC screen / CMD window
NVFlash can take a while

There is no cmd window open. I cant remember if there even was one or if i closed it. What do i do now? Do i re-run bat program as shown in step 3?

leif2 said:
There is no cmd window open. I cant remember if there even was one or if i closed it. What do i do now? Do i re-run bat program as shown in step 3?
Click to expand...
Click to collapse
Basically the entire procedure for NVFlash is this
1: Connect TF101 to PC USB
2. Power Off TF101
3. Put TF101 into APX mode (Power & Volume Up)
4. Run download.bat as Administrator (Right click > Run as Admin)
5. Keep an eye on the CMD window as it will say things like "Deleting partitions > Creating partitions > Sending System / Boot / etc"
6. TF101 should reboot when done
----
If you didn't see the above, just start again from No.1

Yeah, i remember seeing a bunch of messages on tf101 about partioning ect.. . I dont think tf 101 rebooted though. Or maybe it did. This was some hrs ago now since tablet has been stuck with entering recovery mode on screen so i cant remember. I also dont remember if i ran bat with admin privilages. Shall i restart the entire nv flash procedure then? Should i first uninstall and reinstall the apx driver as i sugguested since the one i installed came with a different download pack?

leif2 said:
Yeah, i remember seeing a bunch of messages on tf101 about partioning ect.. . I dont think tf 101 rebooted though. Or maybe it did. This was some hrs ago now since tablet has been stuck with entering recovery mode on screen so i cant remember. I also dont remember if i ran bat with admin privilages. Shall i restart the entire nv flash procedure then? Should i first uninstall and reinstall the apx driver as i sugguested since the one i installed came with a different download pack?
Click to expand...
Click to collapse
It doesn't take hours to complete, not even an hour, you're looking at somewhere around the 15-30 minute mark, been a long time since I used it
Yea just cancel it, you can't break NVFlash, it is hard coded into the TF itself, its the lowest level communication between TF and PC that will still work even if you messed up your firmware, so long as hardware is fine
Drivers come with the NVFlash ROMs, uninstall the one you have running at the minute and install the one from the NVFlash zip
You'd be better off getting the new drivers ready and uninstalling the old ones while the TF is still connected in APX mode or they will disappear from device manager
These are the ones I use
http://www.xdafileserver.nl/index.php?dir=Asus%2FAsus+Transformer+%28TF101%29%2FSTOCK+ROMS%2FICS+.27
EDIT - Is your TF101 SBK1 ? (Serial number below B7O)

I went into device manager and uninstalled apx driver like you said but after that I didn't see a way to update apx driver. Holding down vol up/ power didn't seem to be doing anything so I rebooted my PC with asus still attached. That caused the asus screen to go dark which had previously been stuck with the entering nv flash recovery mode/nv3p message for the last 3 hrs. tf101 wouldnt seem to turn on so I plugged it into wall thinking battery may have died but now it still wont turn on. Have I killed my tf101? If not what do I do now? I can feel the charger heating up so pherhaps I better leave it plugged into wall until charger cools down again letting me know it's charged?

Its likely still in APX mode, you'll need to hold power for about 20-30 seconds, then power it on again normally
To install the new APX drivers, you'll need to power it into APX mode while it is attached to the PC USB, then once the PC sees it, point the driver install to the new driver location and install them that way

I plugged back into pc and in device manager it wont let me change apx. It says it already has the best version. This even though i had uninstalled it just before. At this point since i cant see my battery leval im going ro leave plugged into wall for a while and then try running bat file again with current apx drivers and come back here to post my results. Thx for assistance. By the way before plugging back into pc i tried holding power button down for 30 seconds and nothing happened.

You'll need to check the "Delete driver software" box when you uninstall the APX driver or it will just install it again automatically
Likely that driver is fine anyway if it can see the TF
Holding the power button down for 30 seconds just powers the TF off, you won't see anything until you power it back on again
APX mode is 99% black screen on the TF until you power it off and back on normally again

Before i run the bat file- did you say to do it in a cmd prompt? Cause i dont remember reading directions to do it that way. I think before i just double clicked the bat file that was extracted on my PC. By the way i held rhe power button for at least 30 seconds more than once im pretty sure, and there was no activity on my screen

The .bat file will open CMD itself

you were right, when i checked the box "delete driver software" I was able to uninstall. Then after rebooting W8 in advanced settings I was able to disable driver certification which let me update my APX to that of the same folder in which I downloaded the nvflash im currently using. Unfortunately all this had the same result. That is the cmd ran successfully formatting/ partioning ect.. and then like before the cmd said something quickly about being successful and then self closed. Now like before my tf101 is stuck showing entering nvflash recovery message on screen. It never rebooted. Could this be that my tf101 is too new for this method to work? My serial bar sticker came off so I can't check it but my sales invoice is dated june 8 2011 if that helps. Please advise what I should do now

leif2 said:
you were right, when i checked the box "delete driver software" I was able to uninstall. Then after rebooting W8 in advanced settings I was able to disable driver certification which let me update my APX to that of the same folder in which I downloaded the nvflash im currently using. Unfortunately all this had the same result. That is the cmd ran successfully formatting/ partioning ect.. and then like before the cmd said something quickly about being successful and then self closed. Now like before my tf101 is stuck showing entering nvflash recovery message on screen. It never rebooted. Could this be that my tf101 is too new for this method to work? My serial bar sticker came off so I can't check it but my sales invoice is dated june 8 2011 if that helps. Please advise what I should do now
Click to expand...
Click to collapse
Normally it tells you that it can't find the tablet or fails sending the data if your TF is SBK2, it sounds like something else is wrong somewhere
You could try using Easyflasher, that works on SBK1 and SBK2 TF101s
http://forum.xda-developers.com/showthread.php?t=1688012
That should install TWRP Recovery, and from there you can flash any ROM you like from MicroSD Card
Make sure you choose TWRP recovery though

[Q] Hard-Bricked, no boot. Failed during flash

OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?

gtgeek said:
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
Click to expand...
Click to collapse
+1

gtgeek said:
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
Click to expand...
Click to collapse
So will the tablet not boot into the bootloader ?
Thx Josh

lj50036 said:
So will the tablet not boot into the bootloader ?
Thx Josh
Click to expand...
Click to collapse
Nothing, just the black screen.
I only know something is going on when I connect it to a pc I can here it connect/disconnect when I hold the power button or press the reset button. Also checked the hdmi output on another screen to make sure that wasn't the problem....it wasn't.

gtgeek said:
Nothing, just the black screen.
I only know something is going on when I connect it to a pc I can here it connect/disconnect when I hold the power button or press the reset button. Also checked the hdmi output on another screen to make sure that wasn't the problem....it wasn't.
Click to expand...
Click to collapse
I see....
If you dont have your nvflash blobs, its a brick ...
Sorry for the bad news ....
Thx Josh

lj50036 said:
I see....
If you dont have your nvflash blobs, its a brick ...
Sorry for the bad news ....
Thx Josh
Click to expand...
Click to collapse
That was the conclusion I was coming to.
Now, for a nerdier question. If I had physical access to the processor, could I program it directly using it's programming ports?

gtgeek said:
That was the conclusion I was coming to.
Now, for a nerdier question. If I had physical access to the processor, could I program it directly using it's programming ports?
Click to expand...
Click to collapse
Nope there is just no way...
The chip is locked down ... :crying:
There is lots of info out there but its just info ...
No one to date has come back from where you are ....
Thx Josh