Database Info

simple question. I9020A rooted running ICS rom. Do I accept OTA update?

Hi there,
Since my phone is a I9020A on Fido I rooted and currently running CM9 ICS rom, should I accept any OTA update or do I have to manually install it through CWM?

No, it can screw up your device if you do it like that. Just do it manually like everyone is doing.
Sent from my Nexus S using xda premium

HeavenlyWinds said:
No, it can screw up your device if you do it like that. Just do it manually like everyone is doing.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
for now what I did was downgrade to stock 2.3.6 in hopes teh OTA would be received
Can you tell me which package I should be flashing? I have yet to see the OTA for 4.0 for the I9020A

sspikey said:
for now what I did was downgrade to stock 2.3.6 in hopes teh OTA would be received
Can you tell me which package I should be flashing? I have yet to see the OTA for 4.0 for the I9020A
Click to expand...
Click to collapse
There is this rom
AndroidUser00110001 said:
ROM:
Android 4.0.3 IML74k
Bootloader Version : I9020XXKL1 - Works with all GSM devices. Please check HERE to see if it will work on your device.
Radio - No Radio. Your favorite radio will work with 4.0.3
Root - DO NOT UPDATE SUPERUSER. Wait for proper ICS version. The current version will not ask or show permission is granted for apps that require root.
Do not update superuser yet until a new version for ICS comes out.
All apps that can be downloaded from market have been removed. If you can not see your missing apps in Android Market then download attached zip files.
Building new ROM from source now. Will be all pure android but for status bar widgets and enhanced power menu.
Follow me on Twitter for more updates and when my AOSP ROM will be released.
There is a patch for new Systemui.APK file that will show H when you have HSPA signal. It is attached to this post and can be loaded from recovery.
Deodex Version
Download HERE
Odex Version
Download HERE
No Bootloader - These files do not contain the bootloader that came with ICS.
Odex Version
Download HERE
Deodex Version - thanks brenix!
Dowload HERE
Add On:
Depending on what country you are in, you may not see some of the missing apps in Android Market. Download the files below, extract the zip, place the apk files on SD Card and side load them if you favorite file browser or whatever.
Apps 1
Apps 2
Follow me on Twitter
If you would like to make a small donation for my work you may do so by clicking HERE
Click to expand...
Click to collapse

maxone001 said:
There is this rom
Click to expand...
Click to collapse
Run the Odex or Deodex version?
Where would I find the proper radio for Fido?
Sorry im a terrible noob!

sspikey said:
Run the Odex or Deodex version?
Where would I find the proper radio for Fido?
Sorry im a terrible noob!
Click to expand...
Click to collapse
Only difference between odex and deodex is that deodex is for theming. Odex boots faster.... And if the radio you're using right bow is working properly you don't need to flash another radio

JakeOcn said:
Only difference between odex and deodex is that deodex is for theming. Odex boots faster.... And if the radio you're using right bow is working properly you don't need to flash another radio
Click to expand...
Click to collapse
Ok so I flashed 2.3.6 back stock for OTA rom from the thread in this section and now for some odd reason I cant access my CWM. Whenever I try to it shows some box and triangle thing flashing
tried to reflash CWM using Rom Manager and kept getting an error.
Doh!

To the handful of people getting OTA update on i9020a, PLEASE PLEASE PLEASE get either:
a) name of ZIP file
b) URL of ZIP file
c) copy ZIP file and upload (should be in /cache folder I think)
(preferably all three)
Once you install it the file is deleted and you lost your chance, so please if you downloaded update don't apply until you get at least one of the above...but preferably all three, you would be a hero to all of us in this thread with i9020a wanting update. This is AT&T/Rogers model.

doubleblack said:
To the handful of people getting OTA update on i9020a, PLEASE PLEASE PLEASE get either:
a) name of ZIP file
b) URL of ZIP file
c) copy ZIP file and upload (should be in /cache folder I think)
(preferably all three)
Once you install it the file is deleted and you lost your chance, so please if you downloaded update don't apply until you get at least one of the above...but preferably all three, you would be a hero to all of us in this thread with i9020a wanting update. This is AT&T/Rogers model.
Click to expand...
Click to collapse
There´s people getting OTA on i9020A?
I bought my Nexus in Canada so it´s a i9020A

r4du said:
There´s people getting OTA on i9020A?
I bought my Nexus in Canada so it´s a i9020A
Click to expand...
Click to collapse
People are claiming to get it, including what I believe was the OP of this thread...so I guess so? All I know is I have i9020a and I'm starting to get pissed off not having ICS!

doubleblack said:
People are claiming to get it, including what I believe was the OP of this thread...so I guess so? All I know is I have i9020a and I'm starting to get pissed off not having ICS!
Click to expand...
Click to collapse
The OP states he is running CM9 Kangs... He isn't getting the update since he is not on stock -- I think he is just asking how to actually take the OTA when it comes.
I am on Fido too in Canada and I can assure you, I have not received the OTA for my I9020A yet... Once it is available for my I9020A, I will post all the information here (if the I9020A official OTA is not already posted, that is...)

if i flash back to stock with root will i still receive OTA on ns4g?? even if with a different kernal?
Sent from my Nexus S 4G using XDA Premium App

Eniac77 said:
The OP states he is running CM9 Kangs... He isn't getting the update since he is not on stock -- I think he is just asking how to actually take the OTA when it comes.
I am on Fido too in Canada and I can assure you, I have not received the OTA for my I9020A yet... Once it is available for my I9020A, I will post all the information here (if the I9020A official OTA is not already posted, that is...)
Click to expand...
Click to collapse
bingo I didnt receive the update
just wantred to be prepared
I have an issue though where I cant seem to access the CWM.
I think I am going to revert my phone to stock for now until everything gets sorted out!

neo_x22000 said:
if i flash back to stock with root will i still receive OTA on ns4g?? even if with a different kernal?
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
I think the kernel has to be stock as well.
I just downloaded OTARootKeeper app and have reverted completely back to stock; I am patiently waiting for the i9020A OTA.
Hopefully we get it soon.
I don't mind a little wait though... by then all the other bugs and such with SuperUser app will be figured out for ICS.

Eniac77 said:
I think the kernel has to be stock as well.
I just downloaded OTARootKeeper app and have reverted completely back to stock; I am patiently waiting for the i9020A OTA.
Hopefully we get it soon.
I don't mind a little wait though... by then all the other bugs and such with SuperUser app will be figured out for ICS.
Click to expand...
Click to collapse
how do use root keeper...do i download it from the market after update...like i would with titanium backup..
Sent from my Nexus S 4G using XDA Premium App

Eniac77 said:
I think the kernel has to be stock as well.
I just downloaded OTARootKeeper app and have reverted completely back to stock; I am patiently waiting for the i9020A OTA.
Hopefully we get it soon.
I don't mind a little wait though... by then all the other bugs and such with SuperUser app will be figured out for ICS.
Click to expand...
Click to collapse
is that really all I have to do?
I installed 2.3.6 back (from the thread with all the stock OTA updates) and need to unroot using the app you mentionned and update via OTA? thats it?

sspikey said:
is that really all I have to do?
I installed 2.3.6 back (from the thread with all the stock OTA updates) and need to unroot using the app you mentionned and update via OTA? thats it?
Click to expand...
Click to collapse
I downloaded Voodoo OTARootKeeper from the android market. The description of the program claims it should hide your root during the ota and according to the apps latest reviews, it works on this ics upgrade. I am keeping my fingers crossed that it works and hopefully the super user app from the market will be updated by then to handle ics.

Eniac77 said:
I downloaded Voodoo OTARootKeeper from the android market. The description of the program claims it should hide your root during the ota and according to the apps latest reviews, it works on this ics upgrade. I am keeping my fingers crossed that it works and hopefully the super user app from the market will be updated by then to handle ics.
Click to expand...
Click to collapse
Also, Superuser has been officially updated for ICS, so you don't really need to use OTARootKeeper. The new SU works just like before.
http://androidsu.com/superuser/
Also, it looks like I hit "Thanks" instead of "Reply" at first, so.... free "Thanks" for you

I've been through the threads and nothing on Android 4.0.3 OTA for the I9020A as yet. My guess is when it shows up it will be posted in the master thread below
ALL Nexus S OTA Updates for ALL Variants, Plus Full ROM Packages
http://forum.xda-developers.com/showthread.php?t=1063664
Btw I'm on Telus and nothing as yet.

Official Rogers ICS upgrade to Skyrocket has arrived - I just got it!

This morning I plugged my phone into Kies and was informed a firmware upgrade was available. I proceeded with the upgrade and how have ice cream sandwich on my phone. I have taken some pictures, which I will try to attach.

Here are a couple of pictures to prove it.

Anyone else?
Sent from my SGH-I727 using xda premium

Its posted on sammobile. I727RUXLF3. Android 4.0.4.
Didn't the t989 just get 4.0.3?
Looking like rogers is finally stepping its game up
Sent from my SGH-I727 using xda premium

SO jelly
Sent from my SAMSUNG-SGH-I727 using xda premium

sorry if this is wrong but, how do we root this.

Just took the update too
Edit: I believe this is how to root ICS

Just flash cwm or twrp and then install superuser.zip to root.

bluntman420 said:
Just flash cwm or twrp and then install superuser.zip to root.
Click to expand...
Click to collapse
cant do that always says something about signiture fails or something.
i spell bad.

rezadue said:
This morning I plugged my phone into Kies and was informed a firmware upgrade was available. I proceeded with the upgrade and how have ice cream sandwich on my phone. I have taken some pictures, which I will try to attach.
Click to expand...
Click to collapse
Cool man; things are looking up!

Thanks for the heads up!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

bluntman420 said:
Just flash cwm or twrp and then install superuser.zip to root.
Click to expand...
Click to collapse
Make sure you have the latest superuser.zip and you have to flash it a few times.

I am in Kies and my current firmware is PDA:KJ7/PHONE:LE2/CSC:KJ7 (RWC) and if I click on Firmware Upgrade and Initialization I get a message saying SGH-I727R does not support initializing.
Am I doing something wrong? Can you get the update from Kies if your phone is root?
Thanks.

What is the build date of this Rogers ICS update?

If I'm on a ROM can I just go ahead and update via keis? Or so I have to reinstall an official build first?
Really not sure I want to revert back to TouchWiz from SKY ICS though, any comments on the Rogers build?

could someone grab the radio from this and make cwm flashable please ?

June 9th
petrochemicals said:
What is the build date of this Rogers ICS update?
Click to expand...
Click to collapse

bluntman420 said:
Make sure you have the latest superuser.zip and you have to flash it a few times.
Click to expand...
Click to collapse
yeah i can install superuser through the store but i can not get root.
i cannot install anything through the recovery, it tells me the signiture fails.
how do i root this new ics rom for the sgs2 i727r.
thanks.

First thing I did after Rogers official update was to install Apex Launcher. All is good so far.
petrochemicals said:
What is the build date of this Rogers ICS update?
Click to expand...
Click to collapse
veames said:
If I'm on a ROM can I just go ahead and update via keis? Or so I have to reinstall an official build first?
Really not sure I want to revert back to TouchWiz from SKY ICS though, any comments on the Rogers build?
Click to expand...
Click to collapse

Can someone be kind enough to take a nandroid backup of the new ROM and post it? Can seem to be able to get the update from Kies. Also it would be good for dev to have a nandroid backup so they can start mod

Your device does not support software upgrading via Kies

I live in Bangladesh. I bought my at&t skyrocket i727 from a person just returned from usa which is unlocked.
every time i try to update my phone via kies it says "Your device does not support software upgrading via Kies".
my phone is not rooted and in stock rom.
what should i do to update my phone officially?????
My phone details are
version 2.3.5
Baseband I727UCKJ2
kernel 2.6.35.11
Build GINGERBREAD.UCKJ2

kamol1985 said:
I live in Bangladesh. I bought my at&t skyrocket i727 from a person just returned from usa which is unlocked.
every time i try to update my phone via kies it says "Your device does not support software upgrading via Kies".
my phone is not rooted and in stock rom.
what should i do to update my phone officially?????
My phone details are
version 2.3.5
Baseband I727UCKJ2
kernel 2.6.35.11
Build GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
go here http://forum.xda-developers.com/showthread.php?t=1652398

vincom said:
go here http://forum.xda-developers.com/showthread.php?t=1652398
Click to expand...
Click to collapse
thanx a lot bro.
i have one more confusion if u can clear.
i will do odin tonight to flash stock ATT ICS 4.0.4: I727UCLF6_I727ATTLF6_ATT.
all i need to know that do i need to carrier unlock my phone again? will it become carrier locked after firmware update?

kamol1985 said:
thanx a lot bro.
i have one more confusion if u can clear.
i will do odin tonight to flash stock ATT ICS 4.0.4: I727UCLF6_I727ATTLF6_ATT.
all i need to know that do i need to carrier unlock my phone again? will it become carrier locked after firmware update?
Click to expand...
Click to collapse
If it's unlocked it will stay unlocked forever
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

xcrazydx said:
If it's unlocked it will stay unlocked forever
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
testing now, please wait........................................................confirmed working, unlock stays unlocked
i added this info to the sticky

vincom said:
testing now, please wait........................................................confirmed working, unlock stays unlocked
i added this info to the sticky
Click to expand...
Click to collapse
Thanx again......downloaded odin and stock firmware 4.04. will be doing it tonight.
its my first time in flashing. need a lot of luck. will let you know what happens.

kamol1985 said:
Thanx again......downloaded odin and stock firmware 4.04. will be doing it tonight.
its my first time in flashing. need a lot of luck. will let you know what happens.
Click to expand...
Click to collapse
are you following my guide, if you are
just follow the newb directions and you should be fine, soon u will be a power user

vincom said:
are you following my guide, if you are
just follow the newb directions and you should be fine, soon u will be a power user
Click to expand...
Click to collapse
everything went so smooth. did it in first go. wow updated in 4.0.4. phone working fine. took 6.48 minute to upgrade.
for your information extracted stock tar file using winzip.
thanxxxxx a lot brother.

kamol1985 said:
everything went so smooth. did it in first go. wow updated in 4.0.4. phone working fine. took 6.48 minute to upgrade.
for your information extracted stock tar file using winzip.
thanxxxxx a lot brother.
Click to expand...
Click to collapse
Don't just say "thanks" & don't be shy.... If you think that these guys helped you.... Hit the "THANKS" button It's always appreciated!
Sent from, The Eclectic Chair.

shaggyskunk said:
Don't just say "thanks" & don't be shy.... If you think that these guys helped you.... Hit the "THANKS" button It's always appreciated!
Sent from, The Eclectic Chair.
Click to expand...
Click to collapse
+1
I but alot of time making and reediting those stickies
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

[Q]Installing Supercharged Atrix ROM after OTA update

Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!

thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Questions belong in the Q&A Section.

The signature verification failed because SCV7 is based on our ICS leak. Which is TOTALLY different than the OTA update you recieved. There are currently no ROMs available for the firmware you are on.

thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock

farshad525hou said:
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
Click to expand...
Click to collapse
Lol farshad, you're so right. I didn't even read that part of his post.
Fall the Moron.... Lol.
Sent from my SAMSUNG-SGH-I727 using xda premium

thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.

willyyumm27 said:
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
Click to expand...
Click to collapse
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!

thordroid said:
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
Click to expand...
Click to collapse
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...

Apex_Strider said:
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Click to expand...
Click to collapse
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app

is there no way out?
devilhunter47 said:
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
can i FXZ this to 2.3.5? would that be of help?

thordroid said:
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
Click to expand...
Click to collapse
Dont ever try to fxz from ota ics to gb..you'll hard brick
Sent from my MB865 using xda app-developers app

No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium

Atrix 2 brick
I've bricked my atrix 2 and reinstalled the original rom with an application from Motorola that let me force the original back on my device. But I did not have ics. So I'll look up the application and the original rom. Later tonight or tomorrow.

You can FXZ from ICS to GB
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!

thordroid said:
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
Click to expand...
Click to collapse
no dont cross flash..you'll end up with a hard brick

Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks a lot mate!
It is due to recommendation of you guys that I'm still on GB, which is quite snappier than ICS. :good:

I am going to stick with GB too,no more flashing until a stable CM 10 is out
Sent from my MB865 using xda app-developers app

[Q] OTA ICS fails

Hey,
I rooted my phone a long time ago and really didn't do much with it other than used droidwall. I tried OTA updating and it failed. So I did a factory reset and then tried the OTA and it also failed. What are my options?
Thanks!

You've deleted or modified one of the files it checks. At this point you need to fxz to stock.

mtnlion said:
You've deleted or modified one of the files it checks. At this point you need to fxz to stock.
Click to expand...
Click to collapse
Thanks for the quick reply. Do I need to FXZ to 2.3.5 or is it possible to FXZ to 2.3.6. Im US ATT.

brokenarray said:
Thanks for the quick reply. Do I need to FXZ to 2.3.5 or is it possible to FXZ to 2.3.6. Im US ATT.
Click to expand...
Click to collapse
First what were you on?

brokenarray said:
Thanks for the quick reply. Do I need to FXZ to 2.3.5 or is it possible to FXZ to 2.3.6. Im US ATT.
Click to expand...
Click to collapse
If you are rooted, you can check /cache/recovery/last_log for details about the install fail.
But, yes, you can use the 2.3.6 fxz if you are on GB.

brokenarray said:
Thanks for the quick reply. Do I need to FXZ to 2.3.5 or is it possible to FXZ to 2.3.6. Im US ATT.
Click to expand...
Click to collapse
If you was on ICS Leak#1, you can fxz back to 2.3.6, but if you was on 2.3.6 GB, you'll have to go back to 2.3.5 with the normal fxz and patch.
Edit: wow, I was slow on the draw!
Just be sure you use the correct one.
Sent from my MB865 using xda premium

Just wanted to update everybody that I successfully FXZ'd 2.3.6 to 2.3.6 and OTA'd to ICS!!!
Thanks!

brokenarray said:
Just wanted to update everybody that I successfully FXZ'd 2.3.6 to 2.3.6 and OTA'd to ICS!!!
Thanks!
Click to expand...
Click to collapse
Where do I get FXZ 2.3.6 to 2.3.6? I looked in the UPDATE[7/22/12] The Beginners Guide !!! (NOOBS)[ALL IN 1 RESOURCE GUIDE]
I did not see the files. I am rooted and 2.3.6 I am getting an error when I try to update to ICS. I checked the cache and the error I had is:
failed to open the file (java.io.IOException at com.estrongs.android.pop.app.ct.run(unknown source) SO I assume if I FXZ to 2.3.6 I should be able to update to ICS?

Here if you're on 2.3.6
http://forum.xda-developers.com/showthread.php?t=1539167
Here if you are on ics leak#1
http://forum.xda-developers.com/showthread.php?t=1805975

mtnlion said:
Here if you're on 2.3.6
http://forum.xda-developers.com/showthread.php?t=1539167
Here if you are on ics leak#1
http://forum.xda-developers.com/showthread.php?t=1805975
Click to expand...
Click to collapse
Does it matter if my phone is AT&T?

These are for at&t