[Resolved] LG Optimus 4X HD firmware V10f upgrade problem - General Questions and Answers

Hello,
I just bought a new LG P880 (Optimus 4X HD), which is Hong Kong version and has firmware version of V10C.
AFAIK, HK and other Asian regions do not have firmware V10F yet. So I decided to follow the tutorial in this topic:
http://forum.xda-developers.com/showthread.php?t=1861854
Unfortunately, after "Launch Software Update" on KDZ_FW_UPD, the logs printed few lines and then my phone reboot and disconnected from the PC, and not entering S/W Upgrade mode anymore, just a black screen (sometimes gray or green). Soft buttons still have light on but it seems nothing happening to my phone. No more log in KDZ_FW_UPD, even I wait for 10 more mins.
Now I can start my phone (put the battery in and normal start lead to S/W Upgrade mode).
Please help me
Thank you.
EDIT: never mind, found the solution here: http://forum.xda-developers.com/showpost.php?p=30891812&postcount=23

Related

any1 have a copy of Bell/Virgin LG Eclypse C800G Stock Rom/backup?

any1 have a copy of Bell/Virgin LG Eclypse C800G Stock Rom/backup? and info how to re-add the rom back to the phone?
I restarted my phone and now its stuck on the LG Logo boot screen. I tried doing the Hard reset using Vdown + A + F + Power came up with the android logo and still nothing. now since doing the hard reset its just always after turning on it goes into the reset mode then lo boot logo and sticks with the boot logo.
Thanks
P.S. sorry if this is in the wrong section and if so please place it to right section without deleting topic? Thanks
anyone?
Please I'd be most thankful if you could help me out as i really need the phone since the wife is 8months pregnant and I need the phone just in-case she goes into early labor and I'm out or at work she can call me.
Thanks
solution yet?
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
Nope sorry. Wish I did.
DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
where did you buy the phone?
i got it off my roommate he just turned it off one night then when he turned it back on it was stuck on LG screen then i tried a restore and now it gets stuck on the restore/ android unboxing screen then it stops and reboots and does it again
I believe that I have found the Stock Rom for the LG Eclypse | LG-C800G
LG Eclypse | LG-C800G Stock Rom in KDZ file format:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
I'm new to this so if anyone knows how to load the .KDZ file to the phone can you please let me know?
Thanks
BTW I found the ROM by going here:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>YOUR IMEI WILL BE HERE</esn>
<model>LGC800G</model>
<suffix>AVMBDG</suffix>
<msn>YOUR PHONES S/N WILL BE HERE</msn>
<esn_date>THE DATE OF THE IMEI WAS CREATED</esn_date>
<sw_version>V10C_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_url>
<sw_locale_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Thanks to Crashff over @ androidforums.com and his/her post @- http://androidforums.com/t-mobile-mytouch-q/589060-c800-submodels-g-dg-vl.html
I would like to inform XDA-Dev that the LG Eclypse | LG-C800G Stock Rom in KDZ file format is the true stock rom for the LG Eclypse | LG-C800G. I have tested it and it recovered my device.
I will give a lil info on how I did it the best I can but bare with me as I was not really keeping track on what I was doing when i did it.
1.) Download the LG Eclypse LG-C800G Stock Rom in KDZ file format by going
here:
- http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
and enter your IMEI where you see INSERT IMEI HERE in the address bar
or if your with (Virgin Mobile CANADA) then here:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
2.) Plugged in the phone
3.) I disabled the lge android platform usb modem
4.) I clicked on msxml.msi and
uninstalled it. then reinstalled after
uninstall was completed
5.) right clicked on KDZ_FW_UPD.exe ( You can download KDZ_FW_UPD.exe here: http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698 ) and
went to Properties then Compatibility and selected Windows XP SP2.
I also clicked on Run this program as an administrator. then pressed Apply or OK
6.) I then opened up B2CAppSetup.exe (DON'T DO ANYTHING WITH IT YET wait till you get to ((STEP 10)) ) it can be found here: http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
7.) I then ran KDZ_FW_UPD.exe and only changed the phone mode to EMERGENCY or CS_EMERGENCY I can't remember what one i picked so try all.
8.) I then selected the KDZ File
9.) I then pressed Launch software update as it was extracting the KDZ file
I did this (Step 10)
10.) I then went back to B2CAppSetup.exe then clicked on Customer Support then clicked on Recovery Phone then I entered in my IMEI then pressed Check
and there ya go. the B2CAppSetup.exe should look for and download your rom as KDZ_FW_UPD.exe starts recovering your phone. now let both complete even if one says its done.
Again hope this helps and sorry if its not a good guide as i was not keeping track as to what I was doing.
Lnks not working for the downloads
Plz am currently in gh same situation bt th lknks are not working. plz help me find th stock fom since I've looked allover in vain.
Halp
I need this, I have the T-mobile version of the rom. But I would really like the Canadian version, without the T-mobile **** on it.

[Q] [HELP] i can't update firmware Lg P705 (Optimus L7)

Hello! Anyone could help me, please? I have done everything I can already and I couldn't fix my problem...
My cellphone is a LG Optimus L7 (P705 model)
1) I tried to update the firmware by KDZ program and the operation stopped in the middle of the process, so my phone is stopped in "EMERGENCY MODE", a yellow screen.
2) I tried again and again, but the program stops and it never lets me complete the process. The version of my firmware was V10e, I downloaded any types of Firmwares, but i cant update it anyway.
3) The recovery mode and hard reset option is off in my phone, so, i can't make the phone back to normal by this way, only by the flash/updating mode.
4) I tried to update by Lg Smar tool, but when the ROM download, the program stops and stops working.
5) I already tried to make the same process by another computer, but it happens the same thing is happening in mine.
Currently my phone is broke and locked in this screen "EMERGENCY MODE" and i cant even turn it on.
Anyone know any way to make my celphone back to turn on?
HELP ME!
Sorry, my english isn't so good.

[Completed] [Q] LG G3 D852 FlashTool Says Wrong Model

So Long Story,
Monday I Changed Out Battery Go To Restart Phone, Phone Wont Boot Stuck On LG Screens And Constantly Retrying. Tuesday Night I ReInstall Factory Firmware For G3 D852 - With Success - Phone Working. Wednesday I Decide To Root & Install TWRP - With Success - Phone Working No Issues. Today This Is Where Sh*t Hits The Fan! I Get Crazy & Attempt To Install ChupaChups Lollipop Rom With TWRP - Seemingly Successful Install But After Reboot Wont Boot Stuck In Fast Boot. So I Attempt To Resolve This Following Other Forum Posts Using FastBootOV - WITHOUT Success - Now When Attempting To Boot Phone LG Screen Comes Up Top Left Corner Says "ERROR Boot Certification Verify" Below That Says "590 Secure Booting ERROR!" Then Black Screen With Flashing Red & Blue LED. I Attempted To ReInstall Factory Firmware With LG Flashtool Attempt Fails Stating Wrong Model Number - Phone States On Screen Near Bottom Now D855 Ver5.0 Below That D85520A. What Do I Do Now? How To Get Back To D852? Do I Try To Install D855 Firmware? HELP Im Lost & Frustrated :crying:
Thanks
LG G3 D852 Bell Mobility Phone. 32G.
I Just Want To Try A Debloated OS. And Here I Am.
Hi,
I see you found your device section and asked about this there.... Awesome! ?
XDA Assist is here to help navigate the site, not for support.... And you found your way already!
Thank you, thread closed.

LG G3 D858HK unbrick issue

Hi XDA friends.
Am from india. am using LG G3 D858HK model 32gb dual LTE version.
My mobile as bricked last 2 months back Model as LG G3 D858HK Hong Kong version 32GB varient. Actually i mistakenly installed another not compatible Rom(Android operating system) like Cynongenmod 12.1 on this device. so my mobile not working like below symptoms are behaving.
1. display not coming
2. only without battery as showing like not charging no battery inserted display
3. led light as blinking when its i press back power button
4. when i press back power button its showing like 0% battery no charge(when i insert battery)
5. its not displaying download mode( i pressed special keys like top volume +button and power button and inserting USB for installing OS
So its possible to solve this bricked mobile to unbrick (LG G3 D858HK)
above issues are am getting. but i tried to repair my self. when i insert USB it showing in device manager LG Android usb device. not showing qualcomm hsb like. i properly installed QDLoader HS-USB Driver_64bit_Setup. but it below link as per your mentioned my device hardware as been different. so how can i find it GND and EMMC pins ( for short in using copper wire ) in this mobile LG G3 D858hk. actually am already checked in that mother board but i didn't find pins and GND. compare to sprint model or else D855 model as different between my device.
Please friends help me out on this
Hard-bricked LG G3 D858HK
Will you please, please help me too!
It seems I've hard-bricked my LG G3 D858HK Dual Sim 4G LTE 32GB too. It wasn't updating the firmware (only found out 3 weeks after warranty expired). So, successfully flashed the ROM to Marshmellow 6.0, then tried to root it with (mistakenly) wrong firmware - lollipop app/tool.
Problems: black screen, won't boot (red & blue light flashing), won't go into download mode, computer not recognising phone/USB is plugged into - even with right drivers installed.

Where I can Find TOT and Dll file for LG H900

My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....

Categories

Resources