I have the 9/1 Nightly of cyanogenmod 10 on my Verizon Galaxy S3. Others have had success getting google wallet to work on it, but it cant. I installed the 2 1.5-r75-v6 version on http://forum.xda-developers.com/showthread.php?t=1769083 this guide, and both have the same problem. It works fine until I go to add a card. Then the progress bar spins for a while and it always says it failed.
I searched for this problem and could only find people saying to force stop then try it again. That didn't work.
I called my bank to see if it was on their end. They said the request was approved on their end and it must be Google. So I called google and all they would say is google wallet isn't supported on Verizon yet.
Any help would be greatly appreciated
thanks
You must changed your build.prop. I have a write up here:
http://forum.xda-developers.com/showthread.php?t=1810040
Follow that and it will 100% guarantee fix your problem.
tonu42 said:
You must changed your build.prop. I have a write up here:
http://forum.xda-developers.com/showthread.php?t=1810040
Follow that and it will 100% guarantee fix your problem.
Click to expand...
Click to collapse
I found your guide but I didn't think you could modify your build.prop on cyanogenmod
yea, should have just assumed it was CM10 causing the problem, it's not nearly complete enough for everything to work
Yes, editing the build prop will get it to install and I believe your build prop needs to remain that way until you're dome adding all your cards to Wallet.
Once you are all setup, revert to your original build.prop
Sent from my Nexus 7 using Tapatalk 2
Marcismo55 said:
Yes, editing the build prop will get it to install and I believe your build prop needs to remain that way until you're dome adding all your cards to Wallet.
Once you are all setup, revert to your original build.prop
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Ok. I modified the build.prop and google wallet worked fine. had 10 dollars on the prepaid card. then i reverted back to the original build.prop and the prepaid card says "balance unavailable"
will it work this way, or will i have to stick with the modified build.prop?
you need to keep the modified build.prop
I found that every time I edited build prop on cm10 it would remove the NFC feature from my settings. I was able to get wallet working on the 09_01 release of cm10 by downloading the aosp wallet for the i9300.zip file on the wallet fix forum. Even though I am using the US Variant of the s3, the file worked fine and now wallet is up and running. Didn't have to edit build prop or anything. Just flash thru cwm and enjoy! Here's the link
http://forum.xda-developers.com/showthread.php?t=1769083
Its the 5th file.
Sent from my Nexus 7 using xda app-developers app
Related
I know koush's early ics port supported Wallet and it worked great for me. I currently have some money on wallet and would like to use it.
Can anyone direct me to a rom with wallet? I Tried to find Koush's Old GAPPS, but cant seem to find it.
THANK YOU
Edit: I know AndroidUser's AOSP+ supports wallet, Also An old alpha of CM, Also a Drew Garen Rom supports wallet. Would Like to know if there is any flahshable zip for ics? Or Any other Roms support WALLET?
BUMP. Can anyone give me any information on a mod or a bundled ICS rom with wallet except for AndroidUsers ICS rom?
Can devs only attact Wallet to ICS or is there a flashable zip? The one for GB doesnt work on ICS.
Bump too! Anyone link to a Ics compatible Google wallet that I can flash?
Sent from my Nexus S using xda premium
http://forum.xda-developers.com/showthread.php?t=1397358 this rom has working wallet.
Sent from my Nexus S using xda premium
jark99 said:
Bump too! Anyone link to a Ics compatible Google wallet that I can flash?
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Thanks for trying to help me keep this thread alive
melvinchng said:
http://forum.xda-developers.com/showthread.php?t=1397358 this rom has working wallet.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Thanks for the reply! Im currently Using this and one of Drew Garens Early Ports ONLY because it has WALLET bundled.
I wish someone can make an updated Flashable Zip For the NS 3G. Or Just more roms with WALLET bundled.
Anyone Have any other Ideas?!
I am also curious to find a usable .apk for Google Wallet. I am currently using Brainmasters 4.0.3 Stock Rom - which is amazing, with awesome tweaks!
I have tried an old 2.3.6 .apk, GoogleWallet_1.1R41V8-1.ics.zip (I forget where I found them) and they keep force closing.
Any Help would be amazing since AT&T wont allow Google Wallet due to the whole Isis thing or whatever.
Thanks!!
Toonhead
nexus s
i have root my nexus s (t-mobile),
i9020t
australia 3.
4.0.3 ota + root
install the google wallet for GN APK on the phone
also installed the maket enabler.
but i keep getting google wallet is not has not yet been certified in your country or device.
please help!!
After an embarassing debacle at the store this morning... time to knock this back up to the top.
I'm not going to make another thread when this one is basically asking the same thing.
wallet just failed - because the nfc chip seems to get disabled when wallet is installed. thought it was the kernel but after testing not the case..
Testing went like this:
Beam 4.1.0 rom clean install nothing else = nfc chip chirps at my CC when scanning.
Beam + eugene's kernel = nfc chirps.
Beam + glados kernel = nfc chirps
Beam + GoogleWallet_1.1R41V8-4.ics.403 = no chirp
Beam + any kernel + GoogleWallet_1.1R41V8-4.ics.403 = no chirp.
It's the package from testing that just busts nfc... ideas anyone?
or if anyone is running that Neapolitan flavor rom - export the wallet as an APK for us and attach it in this thread. I'll test it out to see if we can get it working.
callmejon said:
i have root my nexus s (t-mobile),
i9020t
australia 3.
4.0.3 ota + root
install the google wallet for GN APK on the phone
also installed the maket enabler.
but i keep getting google wallet is not has not yet been certified in your country or device.
please help!!
Click to expand...
Click to collapse
I have an i9023 in the US and running Pete Alfonso's latest (22-1-12) build and I'm also getting this message. I've never been able to get wallet to work no matter what rom I'm on. I always get this same message.
I'm on a t-mobile prepaid plan, perhaps that's why I can't use it?? I've tried without the sim card and I get the same problem
tycruickshank said:
I have an i9023 in the US and running Pete Alfonso's latest (22-1-12) build and I'm also getting this message. I've never been able to get wallet to work no matter what rom I'm on. I always get this same message.
I'm on a t-mobile prepaid plan, perhaps that's why I can't use it?? I've tried without the sim card and I get the same problem
Click to expand...
Click to collapse
No that's not a problem. Follow these instructions : http://forum.xda-developers.com/showthread.php?p=21704907
Sent from my Nexus S using Tapatalk
Double Post
vetvito said:
No that's not a problem. Follow these instructions : http://forum.xda-developers.com/showthread.php?p=21704907
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Thanks very much worked perfectly
Sent from my Nexus S using Tapatalk
I know that there are 1or two threads teaching you how to get google wallet up and running on your verizon galaxy s 3, but if your like me, you prefer learning by watching somebody do it. Thats why i made a video of how to install google wallet on your verizon galaxy s 3. If you have any questions you can post in here, or in the comments to my video
MY VIDEO HERE:
http://www.youtube.com/watch?v=A83kLpScJrg
ALL CREDIT GOES TO:
http://forum.xda-developers.com/showthread.php?t=1810140
https://plus.google.com/u/0/108019745978944993252/posts/ZqRXYf7NyBF
http://forum.xda-developers.com/showthread.php?t=1769083
Thanks and i hope this helps some of you guys out. Hope it works out for you guys!
thanks, video instructions easy to follow and it works. just cant update because it says unsupported phone or network.
a65lopez said:
thanks, video instructions easy to follow and it works. just cant update because it says unsupported phone or network.
Click to expand...
Click to collapse
That happened to me at first and I found that I didn't have my build.prop the exact way that it should be. So check your build.prop out!
Sent from my SPH-L710 using xda app-developers app
I can't get update to run either...
error reading card
I used gapps for cm9 and it has an error reading card every time I wiped dealvic cache to reboote in recovery to so if u have the answer reply asap
edsel111 said:
I used gapps for cm9 and it has an error reading card every time I wiped dealvic cache to reboote in recovery to so if u have the answer reply asap
Click to expand...
Click to collapse
I made it very VERY clear at the beginning of the video that you should only follow these instructions if you are on a STOCK ROOTED Rom. I don't know how to do it on any Rom besides that
Sent from my SPH-L710 using xda app-developers app
Could you post a video on how to properly wipe google wallet to save your secure element in the event you want to flash another ROM?
Hey, appreciate the video.
I'm on a stock rooted rom, but when trying to open the build prop in text editor as you did, a pop up message appears saying "Warning: You cannot edit this file because the file system is read-only."
At the top of root explorer you shoold see a button that says "mount r/w" . Tap that button and problem solved
Sent from my SCH-I535 using xda [email protected] app
After installing the wallet, build.prop file should be restored to original? Or leave it?
hjpark68 said:
After installing the wallet, build.prop file should be restored to original? Or leave it?
Click to expand...
Click to collapse
I would just leave it. I dont see why you wouldn't , I mean the build prop that you changed it to is the sprint galaxy s 3, so the only difference is that there are less blocked apps
Sent from my Transformer Prime TF201 using xda app-developers app
Thanks for nice guide!
MaleneAJepsen said:
Thanks for nice guide!
Click to expand...
Click to collapse
Anytime! Thanks for the appreciation
Sent from my Verizon Galaxy S3
My ultimate question is this, I am rooted only. My bootloader is not unlocked and with the exception of root, all is stock. Will these directions work for me or do I have to install a rom?
Sent from my SCH-I535 using Tapatalk 2
SubaruCop said:
My ultimate question is this, I am rooted only. My bootloader is not unlocked and with the exception of root, all is stock. Will these directions work for me or do I have to install a rom?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
You need a custom recovery to flash the files so you must unlock first. [Assuming you're on Verizon] Download https://play.google.com/store/apps/details?id=com.mmmeff.ez.unlock and click unlock. You're now unlocked. To install a custom recovery, download GooManager or Rom Manager and allow the app to install the custom recovery of your choice (TWRP or Clockworkmod). Then you're set to install Google Wallet.
I still can't manage to add a card to the wallet
Hey guys, if for some mod has already been mentioned just go ahead and delete this thread. I did a search and didn't find anything on it.
I take no credit for doing any work on this. I just want to post the file I used and let everyone here know that I've flashed it to my sgs4g and it seems to work like a charm. I have tested it and confirmed working on the 8/30 cm9 build and I believe it will work on most ICS builds.
This is a flashable zip to get Google now working on ICS builds. I used it on my Galaxy S2 without any problems and just flashed and tested it on my sgs4g and everything seems peachy.
I've attached the file I've used, but can't remember the exact thread I originally retrieved it from. This thread appears to be official though if you'd like to see what other versions are available.
http://forum.xda-developers.com/showpost.php?p=29756226&postcount=2856
If op of the thread is actually the person that created this mod then all credit goes to him for being a genius.
This is the mikey6 offline with dictation. You can read more about it in the link above. I've tested out the basic functions and everything seems to work well.
Installation:
Backup
Install zip using CWM or TWRP
I wiped cach/dalvik
and fixed permissions just for good measure (may not be necessary)
To use just hold the search button and select google and if it works for you just tell it to select every time.
I've tested weather and navigation so far.
[EDIT]
Sorry I can't attach the file due to the 8mb limit, but if you use the link above I installed the M6 version.
Sorry for the inconvenience.
How do you get the cards to appear?
I'm using CM9 and when I load the zip and matching APK the google "mountains" appear, then it goes directly to the voice search screen.
Wait for a day
Sent from my SGH-T959V using xda premium
jberger said:
How do you get the cards to appear?
I'm using CM9 and when I load the zip and matching APK the google "mountains" appear, then it goes directly to the voice search screen.
Click to expand...
Click to collapse
you also need to have your google search history enabled.
I don't have mine enabled and it works just fine.
Sent from my HTC HD2 using xda app-developers app
Anyone get wallet working on cm 10.1?
Sent from my SCH-I535 using xda app-developers app
There is an app that installs the proper build.prop and the modified apk for you. I believe its under vzw gs3 general
VZW GS3. EXECUTIONER 2.5
I used the app by krazy koder that I believe you are speakering of. No dice. I had this working on another ROM but not now.
Sent from my SCH-I535 using xda app-developers app
Original wallet instructions for cm10 worked fine for me. I used gscript to edit the build.prop and installed the .zip.
Installed but didn't work in store
I downloaded the KrazyKoder installer, got it all set up, and then I went to Macys to use up a gift card I have there. I calibrated my card with Wallet, and I tried doing it. The first couple tries didn't work and then I tried holding it for a couple seconds. It pinged like it worked, and was showing it was processing, but then it said "Unknown status" and the cashier said it didn't go through. Luckily I had my card with me. I don't know if it works for other people but it didn't work for me.
I was running the CM10.1 Mastamoon 1/5 build.
Here is what I got.
Sent from my SCH-I535 using xda app-developers app
ryan49er said:
Here is what I got.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
thats because youre rooted. mine says that on every rom ive tried and its still worked for me.
When I updated from 10 to 10.1 I tried to install wallet the same way I did before (edit build.prop, flash wallet package) and I encountered problems, but was able to resolve them by disabling the wallet app from the wallet website and then starting again.
Every time I update to a later nightly I have to re-install wallet and I have done it manually as well as using the app, both ways I've encountered issues but at the end of the day they work. Once it gets working your good, the only issues I've had is setting it up and activating.
Sometimes I had to flash it again and sometimes go into root explorer and delete all the files and then start again, but the bottom line is it works
I'm trying top use krazyKoder's wallet install on my rooted SGIII with unlocked bootloader but i am not sure which info to select?
ICS TW ,AOSP,JB TW? I am on Cyanogenmod 10.x
Sorry, I can't find the info anywhere.
This is no longer supported as Google has removed support for everything except 4.4+.
If you still need this for 4.4+ let me know and I will open support again.
I modified the new Google Wallet to allow tap and pay on any device. This modified version has hard coded device information instead of the app looking at your build.prop. So the app and even the Google Wallet website will report that you're using a Galaxy Nexus instead of your actual device.
Install Instructions:
Pre Install
Push/copy the modified nfcee_access.xml attached to this post to /system/etc
Make sure permissions are set correctly (644, rw-r--r--)
Reboot
OR
Open nfcee_access.xml and add the following line:
Code:
<!-- Modded Google wallet signature -->
<signer android:signature="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" />
Reboot
New Install
Install the wallet apk like any other app. Do NOT push to /system/app
Upgrading from 1.x+
If you already have Wallet installed reset it (open Wallet>menu>Settings>Reset Google wallet)
Go to Wallet app settings (Settings>Application Manager>Wallet)
Force stop and Clear data
Using a file explorer with root access (Root Exlporer, Solid Explorer, etc.) go to /system/app
Remove all instances of wallet you may have (Wallet.apk, com.google.android.apps.walletnfcrel*.apk)
Repeat steps 4 & 5 but go to /data/app
Reboot
Install the wallet apk like any other app. Do NOT push to /system/app
Upgrading from 2.0-R151-v8 and older
Go to Wallet app settings (Settings>Application Manager>Wallet)
Uninstall updates
Using a file explorer with root access (Root Exlporer, Solid Explorer, etc.) go to /system/app
Remove all instances of wallet you may have (Wallet.apk, com.google.android.apps.walletnfcrel*.apk)
Reboot
Install the wallet apk like any other app. Do NOT push to /system/app
Upgrading from 2.0-R151-v8-update and newer
Install the wallet apk like any other app. Do NOT push to /system/app
Fixing NFC:
Most AOSP based Roms do not need any kind of nfc fix as the files included are already built correctly. Touchwiz, and other non AOSP Roms more than likely do not have the files built correctly. Some devices already have threads that have an nfc fix.
Here's for the Galaxy S3: http://forum.xda-developers.com/showthread.php?t=2555612
Here's for the Galaxy S4: http://forum.xda-developers.com/showthread.php?t=2454971
If you need to fix your nfc, here's how it was done for the S3:
Go to https://support.google.com/wallet/answer/1347934
Find a device similar to yours, as in same device but different carrier.
Find the forums for that device here on xda and download a Rom for that device.
Alternatively: go to http://get.cm and download a CM build for that device. Will probably be a smaller download.
Pull the following files:
NOTE: The device you're pulling from may be different from this as this was for the Galaxy S3. You might need to get some help/input on which files you'll actually need.
Code:
/system/app/Nfc.apk
/system/etc/nfcee_access.xml
/system/lib/libnfc.so
/system/lib/libnfc_jni.so
/system/lib/libnfc_ndef.so
/system/lib/hw/nfc.MSM8960.so (Yours will most likely be called something different)
Push/copy those files to their respective locations.
Make sure permissions are set correctly (644, rw-r--r--)
How-To(Devs):
I grep'd the smali folder looking for Landroid/os/Build and replaced every model, product, device, fingerprint with a string of what it would return from a Nexus 4 build.prop.
So this:
Code:
sget-object v0, Landroid/os/Build;->MODEL:Ljava/lang/String;
was replaced with this:
Code:
const-string v0, "Nexus 4"
FAQ:
Why use this instead of the Play Store version? That one works on all devices.
Yes, but tap and pay does not! Carriers (AT&T & Verizon) have restricted Google Wallet on their devices to get you to use their proprietary (ISIS) service.
I don't trust a modified app that I use with my bank account and credit cards.
I don't either. But I'm sure if you're reading this, you've already been running a modified version of 1.6.
Either way, I have no interest in anybody's bank account/credit card information. The only lines of code I modified were the ones that look at the build.prop for device information and I added "modded by loserskater" to the nav drawer. There are no other servers/proxies that your information is going to.
I found out my device doesn't have the Secure Element, how can I fix that?
Get a new phone. There is no amount of software hacking that will enable a hardware specific feature. There are some carriers that have SIM cards with the Secure Element, but I'm not knowledgeable enough in that to know if those will work.
I tried to make a transaction but the screen said "Reader detected. Your last tap may not have been successful"
This seems to be happening to an odd variety of users. It may be a Rom issue but there isn't enough info to be sure. It's reported that 1.6 was working fine but this issue is happening in 2.0. The only thing I can suggest to try is going back to a stock Rom and attempting again. It could be that there needs to be a few more files that the 2.0 wallet is relying on that need to be replaced in the nfc fix.
NfcPaymentSetupFailure Error Codes:
UNKNOWN_FAILURE = new NfcPaymentSetupFailure(1);
LOW_BATTERY = new NfcPaymentSetupFailure(2);
NETWORK_FAILURE = new NfcPaymentSetupFailure(3);
NETWORK_ACCESS_REQUIRED = new NfcPaymentSetupFailure(4);
NFC_NOT_ENABLED = new NfcPaymentSetupFailure(5);
TSA_INIT_FAILURE = new NfcPaymentSetupFailure(6);
REBOOT_REQUIRED = new NfcPaymentSetupFailure(7);
INTERRUPTED = new NfcPaymentSetupFailure(8);
SECURE_ELEMENT_ACCESS_REQUIRED = new NfcPaymentSetupFailure(9);
MIFARE_MANAGER_INSTALL_REQUIRED = new NfcPaymentSetupFailure(10);
PROVISIONING_FAILED = new NfcPaymentSetupFailure(11);
FRONTING_INSTRUMENT_SUSPENDED = new NfcPaymentSetupFailure(12);
RPC_METADATA_REJECTION = new NfcPaymentSetupFailure(13);
SECURE_ELEMENT_BRICKED = new NfcPaymentSetupFailure(101);
APPLET_LOCKED = new NfcPaymentSetupFailure(102);
NFC_EE_SECURITY_EXCEPTION = new NfcPaymentSetupFailure(103);
SECURE_ELEMENT_ID_CHANGED = new NfcPaymentSetupFailure(104);
SECURE_ELEMENT_ID_UNAVAILABLE = new NfcPaymentSetupFailure(105);
UNSUPPORTED_SECURE_ELEMENT = new NfcPaymentSetupFailure(106);
NO_SECURE_ELEMENT = new NfcPaymentSetupFailure(107);
Troubleshooting:
Menu>Settings>Change account. Don't actually add another account, just press back or home.
Settings>App Manager>Wallet and Force Stop and Clear Data.
Reboot
Try adding your account again.
If tap and pay still isn't working for you, try from a fresh STOCK rom install. Do not use this apk, but instead make a backup of your build.prop and then change the following information:
Code:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
Now install Google Wallet from the Play Store. If your device needs an NFC fix, then apply that. If you are still having issues then there is something else wrong and the version in this post is not to blame.
Reporting Issues:
Please report the device, carrier, rom, android version, if you applied an nfc fix and where you got it from, the EXACT steps you used to install.
Updates:
R151-v8: Now reports device as Nexus 4.
R151-v8-update: Big changes! New install process. For some reason adding loyalty cards with the camera would not work as a system app. So I had to re-sign the apk with my own private key, that way it can be installed as a user app. But because of the new signature, it had to be added to nfcee_access.xml so make sure you update that as well!
.
Issues:
R151-v8: Adding loyalty cards causes a FC. To get around this you can install the stock app, add the loyalty cards and then install this modified version.
Install the udpate!
R151-v8+: When opening the app you'll get a notification that there was a sign in error, it doesn't affect anything and I haven't figure out a way to get rid of it. Just dismiss this notification and you'll be fine.
Downloads:
com.google.android.apps.walletnfcrel-2.0-R133-v9-MODDED.apk
com.google.android.apps.walletnfcrel-2.0-R133-V14-MODDED.apk
com.google.android.apps.walletnfcrel-2.0-R141-V14-MODDED.apk
com.google.android.apps.walletnfcrel-2.0-R151-v8-MODDED.apk(Note: this one breaks adding loyalty cards)
New install method!!!
nfcee_access.xml
com.google.android.apps.walletnfcrel-2.0-R151-v8-MODDED-update.apk
com.google.android.apps.walletnfcrel-2.0-R155-v14-MODDED.apk
Sprint Galaxy Note II running JZO54K.L900VPAMC2, custom stock-based rom. Wallet app from the store will return error 11 when Tap-and-Pay is turned on. Your version displays "Not Enabled" for Tap-And-Pay in the settings->about panel. I'm 105% sure I have a secure element in my phone, as I have used Wallet on this device in the past.
Thoughts?
MrDoom said:
Sprint Galaxy Note II running JZO54K.L900VPAMC2, custom stock-based rom. Wallet app from the store will return error 11 when Tap-and-Pay is turned on. Your version displays "Not Enabled" for Tap-And-Pay in the settings->about panel. I'm 105% sure I have a secure element in my phone, as I have used Wallet on this device in the past.
Thoughts?
Click to expand...
Click to collapse
Are you sure you removed all other versions of wallet and cleared all wallet data from your device? My version should at least setup tap and pay. The transactions seem to be the real problem. What does it say under OS in settings>about? Double check http://wallet.google.com and see what device it says.
Sent from my SAMSUNG-SGH-I747
loserskater said:
Are you sure you removed all other versions of wallet and cleared all wallet data from your device? My version should at least setup tap and pay. The transactions seem to be the real problem. What does it say under OS in settings>about? Double check <snip> and see what device it says.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Device is listed as Galaxy Nexus.
OS string is yakju JDQ39E Galaxy Nexus release-keys
Version string is Version 2.0-R133-v9-RELEASE
Wallet was NOT working with Tap prior to this mod, it kept returning error 11.
Disregard
xpose patch will be nice
[Edit]
how does it work? I cannot send any money without confirming my identify only with a us adress
Thank you man! I finally have wallet working! Just paid at the Honda dealer with it. Stock ROM 4.1.2 T-Mobile rooted following the NFC fix and apk in the op!
Thank you thank you thank you!
So says latinmaxima, so it shall be!
worked for my G S4 on AT&T on stock ROM 4.2.2. I had it working with Wallet 1.0 all i did was install this mod and worked just fined, tested at 711 this morning with no problems. I didnt have to do anything else other than these instructions here. It worked so well i even created an account to write this.
So you think this will work on the Galaxy S4 loserskater?
Did you read any of this thread? Look at the post above yours.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
RobbieL811 said:
Did you read any of this thread? Look at the post above yours.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Lol yes I did actually but I don't use wallet and wanted to be sure.....
Sent from my SCH-I545 using xda premium
sbreen94 said:
Lol yes I did actually but I don't use wallet and wanted to be sure.....
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Not meaning to sound like a ****. I have it going on my AT&T S4. It should work on any variant though. There is also another thread dedicated to Wallet. I'll edit this post with the address.
Sent from my SGH-I337 using Tapatalk 4
---------- Post added at 03:27 PM ---------- Previous post was at 03:27 PM ----------
RobbieL811 said:
Not meaning to sound like a ****. I have it going on my AT&T S4. It should work on any variant though. There is also another thread dedicated to Wallet. I'll edit this post with the address.
http://forum.xda-developers.com/showthread.php?t=2454971
Sent from my SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Sent from my SGH-I337 using Tapatalk 4
So far so good...install went fine, tap+ pay is active. I just need to test operation. Vzw GS3.
Nice work, thank you. Much easier than before.
Can verify that this is working 100% on my Verizon galaxy S3 running aosp (currently carbon rom). Tested tap+pay @ Macdonalds and CVS, worked great, zero issues. Awesome work, thank you for such ease of getting wallet back on our phones.
I have a friend that has a vzw note2. He generally runs tw based roms. Any idea what he would need for a nfc fix to get this working?
Tried 3 7-Elevens today with no luck. I know the stores are fine since I use it all the time with the GE ROM.
T-Mobile SGS4 running CM 10.2
Sent from my GT-I9505G using Tapatalk 4
Works without issue, tap and pay successful.
Tmobile touch wiz 4.1.2 rooted
Sent from my SGH-T999 using Tapatalk 4
I[E said:
Tried 3 7-Elevens today with no luck. I know the stores are fine since I use it all the time with the GE ROM.
T-Mobile SGS4 running CM 10.2
Sent from my GT-I9505G using Tapatalk 4
Click to expand...
Click to collapse
Seems to be hit or miss on the s4. I'll try to look into it more.
Sent from my SAMSUNG-SGH-I747
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I'm going to manually push the app.
BTW, running AOCP 6.0 (4.3)
That might be the issue. I will flash an older release or a TW ROM and follow up in the next few days.
Thanks dude. Having you dev on the i747 has made me better understand the operating system and made me love Android even more than I already did!
P.S. Thanks again.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
scorpiopantera said:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
You can't install the app this way since this method would only install it as a user app (data/app). You must always manually push this to system/app so it works as a system app.