Database Info

(Update 5/02/2012 0.9.4) [APP][ICS4.0.3+]OpenVPN for ICS (no root/jailbreak required)

Note:
You can't install a pfx/p12 certification file which is not password protected, it is UNSAFE, android won't allow you do that
Please uninstall previous version first before install 0.9.0.
Due to Titanium Backup can't restore the permission to the keystore, if you are using Titanium Backup to backup/restore configurations, after a restore, please reconfigure your profile, repick the user certification to grant the permission to the keystore.
Features:
Compatible to all ICS device (NO ROOT REQUIRED, works on stock firmware)
Easy to use
Multiple VPN profile
Username/password authentication
Secure (Don't store your private key in App, but managed by Android system)
Open source
Limitation:
Only TUN mode, no TAP mode. (system API limitation)
One simultaneous connection only. (system API limitation)
ChangeLog:
5/02/2012 0.9.4
Fix redirect-gateway option
4/28/2012 0.9.3
Temporary fix tls-auth (Store tls key file in sdcard is insecure !!!)
Fix crash
4/27/2012 0.9.2
Add ns-cert-type option
Fix connection without user certification
4/25/2012 0.9.1
More error message
Fix extra arguments option
4/23/2012 0.9.0
Fix some crash
4/21/2012
Add username/password based authentication support. (Need to input password manually every time when connect)
Issues:
Connection interrupted if leave GUI while preparing/connecting. (It will be OK to leave once connected)
Won't work on JB, wait until google release openssl engine for system keystore
Screen Shots: Here
Download: Here
Source code: Here
Any feedback is welcome.

OpenVPN
Please don't retire this! people haven't stumbled on it but this is great!
The #1 reason most people root their phones even when they don't want to!

Thank you very much. I was using the one in cm7 and worked perfectly. Is there any plans to port it to cm9, this is the most missing feature for me in cm9. Thank you.

Waiting for password authentication.
Nice work anyway!

jcasares said:
Waiting for password authentication.
Nice work anyway!
Click to expand...
Click to collapse
Sure, I'm still working on it, it will be done soon. And I need to setup a test openvpn server first.

I can provide an OpenVPN connection (username and password) if required or it's too much work building a test server.

jcasares said:
I can provide an OpenVPN connection (username and password) if required or it's too much work building a test server.
Click to expand...
Click to collapse
I have already completed it, still thanks

Seems to be an issue with using the tls-auth option. It ignores the file even though the path is correct.

idmud said:
Seems to be an issue with using the tls-auth option. It ignores the file even though the path is correct.
Click to expand...
Click to collapse
I haven't test this feature before, maybe I should migrate this with the new keystore API.

can't select trusted CA
When I select my CA nothing changes so I'm not sure if it registers the certificate in the connection.
When I hit connect the icon flashes in the notification area and disappears.
I have tried the CA certificate in both .pem and .crt formats
Log says: No log.
Am running CM9 on AT&T Nexus S.

config request
Hi! Thanks for your great work!!!
Could you please add a simple checkbox in the connection settings to make the option "--ns-cert-type server" optional?

omriasta said:
When I select my CA nothing changes so I'm not sure if it registers the certificate in the connection.
When I hit connect the icon flashes in the notification area and disappears.
I have tried the CA certificate in both .pem and .crt formats
Log says: No log.
Am running CM9 on AT&T Nexus S.
Click to expand...
Click to collapse
Both .pem and .crt is pem format, where the content should be enclosed between "-----BEGIN CERTIFICATE-----" and "-----END CERTIFICATE-----", you can use any text editor like notepad to check it.
I'll make the error message more verbose and accurate. Before that, can you use `adb logcat` to check if there is any error message ?

zealot0630 said:
Both .pem and .crt is pem format, where the content should be enclosed between "-----BEGIN CERTIFICATE-----" and "-----END CERTIFICATE-----", you can use any text editor like notepad to check it.
I'll make the error message more verbose and accurate. Before that, can you use `adb logcat` to check if there is any error message ?
Click to expand...
Click to collapse
I know they are the same but for some reason the android store will only load .crt files.
The certificate begins and ends as mentioned.
I will try to run a logcat tomorrow.
Sent from my Nexus S using XDA

hamster79 said:
Hi! Thanks for your great work!!!
Could you please add a simple checkbox in the connection settings to make the option "--ns-cert-type server" optional?
Click to expand...
Click to collapse
I have fixed 'Extra arguments' option in 0.9.1, please update and you'll be able to specify custom options.

I have a working OpenVPN server with PCs and Android devices connecting to it.
Here is the situation with ICS.
I have installed this OpenVPN for a friend running ICS Midnote 3.3 for his Samsung Galaxy Note. Unfortunately, I can't get it to work, the logs does not display anything. It goes on stating its preparing and does not do anything else.
I tried forcing it to write any logs by supplying log /sdcard/openvpn/log.txt under the parameter section.
My currently VPN settings include.
Ca.crt, username and password. No keys are supplied.
To isolate things, I tried it with DroidVPN client, which works but is painstakingly slow.
You assistance is highly appreciated.
Thank you.

jaidee said:
I have a working OpenVPN server with PCs and Android devices connecting to it.
Here is the situation with ICS.
I have installed this OpenVPN for a friend running ICS Midnote 3.3 for his Samsung Galaxy Note. Unfortunately, I can't get it to work, the logs does not display anything. It goes on stating its preparing and does not do anything else.
I tried forcing it to write any logs by supplying log /sdcard/openvpn/log.txt under the parameter section.
My currently VPN settings include.
Ca.crt, username and password. No keys are supplied.
To isolate things, I tried it with DroidVPN client, which works but is painstakingly slow.
You assistance is highly appreciated.
Thank you.
Click to expand...
Click to collapse
Would you please try this one , see if it works

zealot0630 said:
Both .pem and .crt is pem format, where the content should be enclosed between "-----BEGIN CERTIFICATE-----" and "-----END CERTIFICATE-----", you can use any text editor like notepad to check it.
I'll make the error message more verbose and accurate. Before that, can you use `adb logcat` to check if there is any error message ?
Click to expand...
Click to collapse
Double checked and there were a few characters before "begin certificate ". Removed them and the certificate loads(the app should ignore any text before/after those words). Still wouldn't connect and nothing in the log.
Just tried 0.9.2 and the log now says:
1335355150,D,MANAGEMENT: CMD 'state on all'
1335355150,D,MANAGEMENT: CMD 'hold release'
1335355150,D,MANAGEMENT: CMD 'username 'Auth' "xxxxxx"'
1335355150,D,MANAGEMENT: CMD 'password [...]'
Sent from my Nexus S using XDA

It seems that it doesn't work and I'm not clear about what the issue is. I'm using user+password authentication.
Code:
W/info.kghost.android.openvpn.OpenVpnService( 3856): Error generate pkcs12
W/info.kghost.android.openvpn.OpenVpnService( 3856): java.lang.NullPointerException: alias == null
W/info.kghost.android.openvpn.OpenVpnService( 3856): at android.security.KeyChain.getPrivateKey(KeyChain.java:291)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at info.kghost.android.openvpn.OpenVpnService$Task.prepare(OpenVpnService.java:123)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at info.kghost.android.openvpn.OpenVpnService$Task.doInBackground(OpenVpnService.java:313)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at info.kghost.android.openvpn.OpenVpnService$Task.doInBackground(OpenVpnService.java:44)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at android.os.AsyncTask$2.call(AsyncTask.java:264)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at java.util.concurrent.FutureTask.run(FutureTask.java:137)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1076)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:569)
W/info.kghost.android.openvpn.OpenVpnService( 3856): at java.lang.Thread.run(Thread.java:856)
D/dalvikvm( 2108): GC_CONCURRENT freed 433K, 28% free 10263K/14151K, paused 2ms+3ms
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): alias == null
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): java.lang.NullPointerException: alias == null
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at android.security.KeyChain.getPrivateKey(KeyChain.java:291)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at info.kghost.android.openvpn.OpenVpnService$Task.prepare(OpenVpnService.java:123)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at info.kghost.android.openvpn.OpenVpnService$Task.doInBackground(OpenVpnService.java:313)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at info.kghost.android.openvpn.OpenVpnService$Task.doInBackground(OpenVpnService.java:44)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at android.os.AsyncTask$2.call(AsyncTask.java:264)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at java.util.concurrent.FutureTask.run(FutureTask.java:137)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1076)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:569)
F/info.kghost.android.openvpn.OpenVpnService$Task( 3856): at java.lang.Thread.run(Thread.java:856)
Maybe you know why the alias==null happens.

Seems there are still some problem when user certification is not set. I'll figure it out soon.

This is what I got now after installing the new version. The application doesn't stay in the notification bar as before and it seems there is no connection to the OpenVPN network.
Code:
D/PackageManager( 2000): New package installed in /mnt/asec/info.kghost.android.openvpn-1/pkg.apk
D/BackupManagerService( 2000): Received broadcast Intent { act=android.intent.action.PACKAGE_ADDED dat=package:info.kghost.android.openvpn flg=0x10000010 (has extras) }
I/ActivityManager( 2000): START {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 pkg=info.kghost.android.openvpn cmp=info.kghost.android.openvpn/.VpnSettings} from pid 12559
I/ActivityManager( 2000): Start proc info.kghost.android.openvpn for activity info.kghost.android.openvpn/.VpnSettings: pid=12965 uid=10087 gids={3003}
D/dalvikvm(12965): Trying to load lib /mnt/asec/info.kghost.android.openvpn-1/lib/libjni_openvpn.so 0x41357cc8
D/dalvikvm(12965): Added shared lib /mnt/asec/info.kghost.android.openvpn-1/lib/libjni_openvpn.so 0x41357cc8
D/dalvikvm(12965): No JNI_OnLoad found in /mnt/asec/info.kghost.android.openvpn-1/lib/libjni_openvpn.so 0x41357cc8, skipping init
I/ActivityManager( 2000): Displayed info.kghost.android.openvpn/.VpnSettings: +378ms
I/ActivityManager( 2000): START {cmp=info.kghost.android.openvpn/.VpnEditor (has extras)} from pid 12965
I/ActivityManager( 2000): Displayed info.kghost.android.openvpn/.VpnEditor: +263ms
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: real-time echo notification set to ON
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: END
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: real-time log notification set to ON
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367061,I,OpenVPN 2.2.2 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] [eurephia] built on Apr 25 2012
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367061,,MANAGEMENT: unix domain socket listening on /data/data/info.kghost.android.openvpn/cache/manage
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367061,,Need hold release from management interface, waiting...
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367062,,MANAGEMENT: Client connected from /data/data/info.kghost.android.openvpn/cache/manage
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367062,D,MANAGEMENT: CMD 'echo on all'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367062,D,MANAGEMENT: CMD 'log on all'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: END
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367062,D,MANAGEMENT: CMD 'state on all'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: real-time state notification set to ON
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367061,CONNECTING,,,
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: END
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367062,D,MANAGEMENT: CMD 'hold release'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: hold release succeeded
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367062,D,MANAGEMENT: CMD 'username 'Auth' "jcasares2"'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: 'Auth' username entered, but not yet verified
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367062,D,MANAGEMENT: CMD 'password [...]'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: 'Auth' password entered, but not yet verified
I/ActivityManager( 2000): START {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=info.kghost.android.openvpn/.VpnSettings} from pid 2256
I/ActivityManager( 2000): Displayed info.kghost.android.openvpn/.VpnSettings: +205ms
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: real-time echo notification set to ON
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: END
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: real-time log notification set to ON
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367167,I,OpenVPN 2.2.2 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] [eurephia] built on Apr 25 2012
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367167,,MANAGEMENT: unix domain socket listening on /data/data/info.kghost.android.openvpn/cache/manage
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367167,,Need hold release from management interface, waiting...
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367168,,MANAGEMENT: Client connected from /data/data/info.kghost.android.openvpn/cache/manage
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367168,D,MANAGEMENT: CMD 'echo on all'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367168,D,MANAGEMENT: CMD 'log on all'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: END
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367168,D,MANAGEMENT: CMD 'state on all'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: real-time state notification set to ON
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: 1335367167,CONNECTING,,,
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: END
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367168,D,MANAGEMENT: CMD 'hold release'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: hold release succeeded
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367168,D,MANAGEMENT: CMD 'username 'Auth' "jcasares2"'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: 'Auth' username entered, but not yet verified
I/info.kghost.android.openvpn.OpenVpnService$Task(12965): >LOG:1335367168,D,MANAGEMENT: CMD 'password [...]'
W/info.kghost.android.openvpn.OpenVpnService$Task(12965): Unknown Command: SUCCESS: 'Auth' password entered, but not yet verified

[Q] [Tool][Windows Only][Root] Android Reverse Tethering

Hi,
I am posting here as I am a newcomer and cannot post in the original post ([Tool][Windows Only][Root] Android Reverse Tethering 2.30)
problem: repeated messages : Tethering port not available
Seems like there is a problem in Redsocks process on the android.
however android usb tunnel is running (Reinstalled through the windows application)
Any help will be appreciated. I have been struggling with this for a while now.
Log:
=======================
10-01 02:30:43:406 W/I Connecting to device...
10-01 02:30:45:468 L/I Reverse tethering started. Process id is 9739
10-01 02:30:53.62 A/I SocketService.onStartCommand. Action = TTServiceStart
10-01 02:30:53.62 A/I UsbThread : thread main : wait current UsbThread to terminate 0
10-01 02:30:53.62 A/I UsbThread2.run() needToBeClosed is true
10-01 02:30:45:671 W/I Wait for android connection ready. If nothing happens now, close the program and retry
10-01 02:30:53.77 A/I UsbThread2 : thread stopped
10-01 02:30:45:781 W/I waiting android server connection ... 1
10-01 02:30:54.48 A/I TunnelController : thread stopped
10-01 02:30:54.63 A/I TunnelController : thread started
10-01 02:30:54.63 A/I UsbThread3 : thread started
10-01 02:30:54.64 A/I UsbThread3 : Create usb socket
10-01 02:30:54.65 A/I UsbThread3 : usbServerSocket : Waiting for the host to connect
10-01 02:30:46:859 W/W Tethering port not available
10-01 02:30:47:843 W/W Tethering port not available
10-01 02:30:48:171 W/I
10-01 02:30:48:171 W/E Connection Aborted. Restart program and try again
Server List
DNS List
192.168.2.1[default]
Status snapshot states:
=================
...
Windows->ADB->Usb port to android: Forward port 42000 nok
...
Android->Redsocks process: process is not running
input udp port port 42001 not opened
input tcp port port 42002 not opened
Configuration
==================
Samsung galaxy S2
Windows XP

[SOLVED][Q] WiFi won't turn on

All of a sudden, on Stock + Root TF700T, WiFi won't turn on. I highly doubt that this is related to my WiFi router ... the WiFi won't even enable on the tablet, and I can't even see a MAC address in About Tablet section.
I also did some digging and have some additional detail, but I cannot find a solution.
logcat:
Code:
E/WifiHW ( 122): Failed to open wlan fw path param (No such file or directory)
E/SoftapController( 122): Softap fwReload - failed: -1
E/WifiStateMachine( 489): Failed to reload STA firmware java.lang.IllegalStateException: command '43 softap fwreload wlan0 STA' failed with '400 43 Softap operation failed (No such file or directory)'
W/CommandListener( 122): Failed to retrieve HW addr for wlan0 (No such device)
D/CommandListener( 122): Setting iface cfg
E/WifiStateMachine( 489): Unable to change interface settings: java.lang.IllegalStateException: command '45 interface setcfg wlan0 0.0.0.0 0 down' failed with '400 45 Failed to set address (No such device)'
E/WifiHW ( 489): wpa_ctrl_open fail, retry again
I/wpa_supplicant( 2767): Successfully initialized wpa_supplicant
E/wpa_supplicant( 2767): nl80211: Could not add multicast membership for scan events: -2 (No such file or directory)
E/wpa_supplicant( 2767): Failed to initialize driver 'nl80211'
E/wpa_supplicant( 2767): wlan0: Unsupported driver 'nl80211'
D/dalvikvm( 1258): GC_CONCURRENT freed 427K, 14% free 3700K/4272K, paused 3ms+3ms, total 57ms
D/AsusBrightnessManager( 489): br transform : 35 -> 13
D/DockManagerService( 489): mLastAcOnline:false mAcOnline:false
D/LowBatteryService( 1487): onReceive:Intent { act=android.intent.action.BATTERY_CHANGED flg=0x60000010 (has extras) }
D/LowBatteryService( 1487): mAcOnline = false, mDeviceBatteryLevel = 96, mDockBatteryLevel = 0, mDockBatteryStatus = 0
D/LowBatteryService( 1487): Battery level is higher than threshold, no need to apply
D/LowBatteryService( 1487): Battery level is good, no need to apply low battery config.
D/DockManagerService( 489): mLastAcOnline:false mAcOnline:false
D/LowBatteryService( 1487): onReceive:Intent { act=android.intent.action.BATTERY_CHANGED flg=0x60000010 (has extras) }
D/LowBatteryService( 1487): mAcOnline = false, mDeviceBatteryLevel = 96, mDockBatteryLevel = 0, mDockBatteryStatus = 0
D/LowBatteryService( 1487): Battery level is higher than threshold, no need to apply
D/LowBatteryService( 1487): Battery level is good, no need to apply low battery config.
E/WifiHW ( 489): Supplicant not running, cannot connect
E/WifiHW ( 489): Supplicant not running, cannot connect
E/WifiHW ( 489): Supplicant not running, cannot connect
E/WifiHW ( 489): Supplicant not running, cannot connect
E/WifiHW ( 489): Supplicant not running, cannot connect
E/WifiHW ( 122): Failed to open wlan fw path param (No such file or directory)
E/SoftapController( 122): Softap fwReload - failed: -1
E/WifiStateMachine( 489): Failed to reload STA firmware java.lang.IllegalStateException: command '46 softap fwreload wlan0 STA' failed with '400 46 Softap operation failed (No such file or directory)'
E/WifiStateMachine( 489): Failed 6 times to start supplicant, unload driver
W/CommandListener( 122): Failed to retrieve HW addr for wlan0 (No such device)
D/CommandListener( 122): Setting iface cfg
E/WifiStateMachine( 489): Unable to change interface settings: java.lang.IllegalStateException: command '48 interface setcfg wlan0 0.0.0.0 0 down' failed with '400 48 Failed to set address (No such device)'
E/WifiHW ( 489): wpa_ctrl_open fail, retry again
I/wpa_supplicant( 2792): Successfully initialized wpa_supplicant
E/wpa_supplicant( 2792): nl80211: Could not add multicast membership for scan events: -2 (No such file or directory)
E/wpa_supplicant( 2792): Failed to initialize driver 'nl80211'
E/wpa_supplicant( 2792): wlan0: Unsupported driver 'nl80211'
D/dalvikvm( 1258): GC_CONCURRENT freed 427K, 14% free 3700K/4272K, paused 2ms+1ms, total 22ms
W/NvCpuClient( 489): Failed to bind to service
D/AsusBrightnessManager( 489): br transform : 35 -> 13
E/WifiHW ( 489): Supplicant not running, cannot connect
W/NvCpuClient( 489): Failed to bind to service
Also, output from netcfg:
Code:
[email protected]:/ # netcfg
lo UP 127.0.0.1/8 0x00000049 00:00:00:00:00:00
dummy0 DOWN 0.0.0.0/0 0x00000082 76:ad:93:6b:c9:b7
sit0 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
ip6tnl0 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
And here is output of my wpa_supplicant.conf:
Code:
[email protected]:/ # cat /etc/wifi/wpa_supplicant.conf
update_config=1
ctrl_interface=wlan0
eapol_version=1
ap_scan=1
fast_reauth=1
And I searched the entire filesystem for "nl80211" and found nothing.
Does anyone have suggestions on where to go next? Did my driver somehow get deleted, or am I just not looking for the right thing?
Thanks.

I will use this question in the future as an example of how to ask for support properly. Unfortunately I don't have a solution for you, but you could check the files in your /data/misc/wifi, maybe you can find something unusual. Your MAC address should come from some file on the FAT filesystem on /dev/block/mmcblk0p5 - I'd recommend making an image of it as a backup and then analyze the image.

_that said:
I will use this question in the future as an example of how to ask for support properly.
Click to expand...
Click to collapse
I provide Enterprise-level support to software devs working in the Cloud and particularly on CentOS/RHEL Linux servers. This is why I know how to ask for help properly.
Well, since I can't find much, and there aren't any definitive answers here, my next thoughts are:
1) Something is seriously jacked up on the filesystem, possibly corrupted driver, possibly something worse. Hopefully, this is the case, because a software problem is possible to fix.
2) The WiFi radio is permanently damaged, or "burnt out".
In the hopes that it's something more like software, I'm going to reimage. I just need to decide what ROM to use. Not having network connectivity will make the prep for this a bit more challenging, but I can work through it using a MicroSD card.
If it's #2, well then I suppose I will have wasted my time reimaging and will be on the market for a new tablet ... and I need to get on that right away because I need to travel soon. Any suggestions are welcome ... I'd like a 9" or 10" tablet and it must have an HDMI out (micro preferred) and be able to handle 1080p video.
Thanks.

[SOLVED]
I am having a heckuva time even doing what I described above.
-I had never unlocked the bootloader before, so when I tried the ASUS unlock util v8, it gave error "INSTALL_FAILED_SHARED_USER_INCOMPATIBLE"
-I tried the ASUS unlock tool v7, and was finally able to install it but when I run and select Unlock I get an error that there is no network connection (FFS that's what I'm trying to resolve!)
-I can't get into recovery, I just get the Android guy with "ERROR!" when I enter fastboot and select "RCK".
My only option is to go back to Stock. So, I tried this:
http://forum.xda-developers.com/showthread.php?t=1833212
The steps in that post result in the same Android guy with the "ERROR!" screen ... not a very helpful error msg.
So, I tried this, and used the stock firmware from ASUS. (NOTE: I downloaded "ASUS Transformer Pad TF700T Firmware: V10.6.1.14.10 Only for US SKU (Android 4.2.1)" directly from ASUS after I read their notes on where to check for which one you need ([Settings]-->[About tablet]-->Build number).):
http://www.transformerforums.com/fo...e-firmware-tf700-tf701-tf300-tf101-tf201.html
From that post ^^ I did Method B: Flash from MicroSD. I extracted the .zip I downloaded from ASUS, and renamed the new zip EP201_768_SDUPDATE.zip per the GUIDE linked above.
I put in my MicroSD, went back into fastboot, and selected "RCK". It was at this point that I began typing the above. Total time to get to this point was about 90 minutes!
-----
FINALLY, for the first time, I saw a progress bar under the Android guy, and he had gears turning in his belly.
*INSERT SIGH OF RELIEF HERE*
As I was typing out all the above, progress bars were moving, and a few reboots happened. I expected that I would be fully back on Stock ROM, and that my data would have been wiped. I never ran a data wipe, I just assumed the ASUS installer would do that by default.
Well, it didn't wipe data. But, what it did do: restore all my device drivers!! After about 10 minutes, and 2-3 reboots, Android loaded with my existing desktop and settings, and the WiFi connected right away!!
So, this fixed it. I documented the above so anyone (even me, months from now) having a similar problem might be able to use these steps.
WOO HOO!

lost root
I should add that I lost root now. I think at this point, after all I've been through with this, I'm just going to press on and install CyanogenMod which is what I was planning to do anyway.

CaptainRewind said:
I should add that I lost root now. I think at this point, after all I've been through with this, I'm just going to press on and install CyanogenMod which is what I was planning to do anyway.
Click to expand...
Click to collapse
Just flash this to get root
http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip

sbdags said:
Just flash this to get root
http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Click to expand...
Click to collapse
Yep, I had to do that anyway because I wanted to do a full Titanium Backup first. Still, I'm moving to CM now.

[FIX] Fix crashing setup wizard

For those who have a force closing/crash on first boot (setup wizard) because of GAPPS, have just to enable wifi manually via ADB.
This is a problem which cause a crash:
Code:
04-08 02:47:08.867 5272-5272/? E/AndroidRuntime: FATAL EXCEPTION: main
Process: com.google.android.setupwizard, PID: 5272
java.lang.NoSuchMethodError: No interface method setWifiEnabled(Z)Z in class Landroid/net/wifi/IWifiManager; or its super classes (declaration of 'android.net.wifi.IWifiManager' appears in /system/framework/framework.jar)
at com.google.android.setupwizard.BaseActivity.tryEnablingWifi(BaseActivity.java:692)
at com.google.android.setupwizard.network.BaseWifiActivity.init(BaseWifiActivity.java:65)
at com.google.android.setupwizard.network.NetworkActivity.onCreate(NetworkActivity.java:222)
at android.app.Activity.performCreate(Activity.java:6682)
at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1118)
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2634)
at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2742)
at android.app.ActivityThread.-wrap12(ActivityThread.java)
at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1489)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:154)
at android.app.ActivityThread.main(ActivityThread.java:6178)
at java.lang.reflect.Method.invoke(Native Method)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:891)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:781)
04-08 02:47:08.873 874-900/? W/ActivityManager: Force finishing activity com.google.android.setupwizard/.network.NetworkActivity
04-08 02:47:08.903 874-900/? W/ContextImpl: Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:877 com.android.server.am.AppErrors.crashApplicationInner:370 com.android.server.am.AppErrors.crashApplication:305 com.android.server.am.ActivityManagerService.handleApplicationCrashInner:13554 com.android.server.am.ActivityManagerService.handleApplicationCrash:13536
04-08 02:47:08.906 874-900/? E/ActivityManager: Sending non-protected broadcast projekt.substratum.APP_CRASHED from system 874:system/1000 pkg android
java.lang.Throwable
at com.android.server.am.ActivityManagerService.checkBroadcastFromSystem(ActivityManagerService.java:17973)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:18545)
at com.android.server.am.ActivityManagerService.broadcastIntent(ActivityManagerService.java:18636)
at android.app.ContextImpl.sendBroadcast(ContextImpl.java:881)
at com.android.server.am.AppErrors.crashApplicationInner(AppErrors.java:370)
at com.android.server.am.AppErrors.crashApplication(AppErrors.java:305)
at com.android.server.am.ActivityManagerService.handleApplicationCrashInner(ActivityManagerService.java:13554)
at com.android.server.am.ActivityManagerService.handleApplicationCrash(ActivityManagerService.java:13536)
at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:1660)
at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:2813)
at android.os.Binder.execTransact(Binder.java:565)
To fix an issue, connect your device to PC, open ADB and write this:
Code:
adb shell svc wifi enable
After that you'll pass the screen.
Cheers
Sent from my Nexus 5 using Tapatalk

i hope to get this problem soon or someday so i can test this ?
thanks for the solution tho Dani ?
Sent from my Nexus+5 using Tapatalk

How to access adb shell, if unable to enable USB debugging?
What am I missing?

truxartis said:
How to access adb shell, if unable to enable USB debugging?
What am I missing?
Click to expand...
Click to collapse
I have done process from above without USB debugging enabled.
Sent from my Nexus 5 using Tapatalk

Paget96 said:
... without USB debugging enabled.
Click to expand...
Click to collapse
Okay...I must be missing something basic:
Code:
X:\>adb devices
List of devices attached
X:\>adb shell svc wifi enable
error: no devices/emulators found
of course, because no devices listed from "abd devices", since I don't have USB debugging enabled.
Can you provide another hint?

truxartis said:
Okay...I must be missing something basic:
Code:
X:\>adb devices
List of devices attached
X:\>adb shell svc wifi enable
error: no devices/emulators found
of course, because no devices listed from "abd devices", since I don't have USB debugging enabled.
Can you provide another hint?
Click to expand...
Click to collapse
Check both answers one is how to enable it, second is about authorization. It worth trying.
http://android.stackexchange.com/questions/120394/can-i-enable-usb-debugging-using-adb
Sent from my Nexus 5 using Tapatalk

Paget96 said:
For those who have a force closing/crash on first boot (setup wizard) because of GAPPS, have just to enable wifi manually via ADB.
This is a problem which cause a crash:
Code:
04-08 02:47:08.867 5272-5272/? E/AndroidRuntime: FATAL EXCEPTION: main
Process: com.google.android.setupwizard, PID: 5272
java.lang.NoSuchMethodError: No interface method setWifiEnabled(Z)Z in class Landroid/net/wifi/IWifiManager; or its super classes (declaration of 'android.net.wifi.IWifiManager' appears in /system/framework/framework.jar)
at com.google.android.setupwizard.BaseActivity.tryEnablingWifi(BaseActivity.java:692)
at com.google.android.setupwizard.network.BaseWifiActivity.init(BaseWifiActivity.java:65)
at com.google.android.setupwizard.network.NetworkActivity.onCreate(NetworkActivity.java:222)
at android.app.Activity.performCreate(Activity.java:6682)
at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1118)
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2634)
at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2742)
at android.app.ActivityThread.-wrap12(ActivityThread.java)
at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1489)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:154)
at android.app.ActivityThread.main(ActivityThread.java:6178)
at java.lang.reflect.Method.invoke(Native Method)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:891)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:781)
04-08 02:47:08.873 874-900/? W/ActivityManager: Force finishing activity com.google.android.setupwizard/.network.NetworkActivity
04-08 02:47:08.903 874-900/? W/ContextImpl: Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:877 com.android.server.am.AppErrors.crashApplicationInner:370 com.android.server.am.AppErrors.crashApplication:305 com.android.server.am.ActivityManagerService.handleApplicationCrashInner:13554 com.android.server.am.ActivityManagerService.handleApplicationCrash:13536
04-08 02:47:08.906 874-900/? E/ActivityManager: Sending non-protected broadcast projekt.substratum.APP_CRASHED from system 874:system/1000 pkg android
java.lang.Throwable
at com.android.server.am.ActivityManagerService.checkBroadcastFromSystem(ActivityManagerService.java:17973)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:18545)
at com.android.server.am.ActivityManagerService.broadcastIntent(ActivityManagerService.java:18636)
at android.app.ContextImpl.sendBroadcast(ContextImpl.java:881)
at com.android.server.am.AppErrors.crashApplicationInner(AppErrors.java:370)
at com.android.server.am.AppErrors.crashApplication(AppErrors.java:305)
at com.android.server.am.ActivityManagerService.handleApplicationCrashInner(ActivityManagerService.java:13554)
at com.android.server.am.ActivityManagerService.handleApplicationCrash(ActivityManagerService.java:13536)
at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:1660)
at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:2813)
at android.os.Binder.execTransact(Binder.java:565)
To fix an issue, connect your device to PC, open ADB and write this:
Code:
adb shell svc wifi enable
After that you'll pass the screen.
Cheers
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
command executed but not working..
only shows setup wizard has stopped

Paget96 said:
For those who have a force closing/crash on first boot (setup wizard) because of GAPPS, have just to enable wifi manually via ADB.
This is a problem which cause a crash:
Code:
04-08 02:47:08.867 5272-5272/? E/AndroidRuntime: FATAL EXCEPTION: main
Process: com.google.android.setupwizard, PID: 5272
java.lang.NoSuchMethodError: No interface method setWifiEnabled(Z)Z in class Landroid/net/wifi/IWifiManager; or its super classes (declaration of 'android.net.wifi.IWifiManager' appears in /system/framework/framework.jar)
at com.google.android.setupwizard.BaseActivity.tryEnablingWifi(BaseActivity.java:692)
at com.google.android.setupwizard.network.BaseWifiActivity.init(BaseWifiActivity.java:65)
at com.google.android.setupwizard.network.NetworkActivity.onCreate(NetworkActivity.java:222)
at android.app.Activity.performCreate(Activity.java:6682)
at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1118)
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2634)
at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2742)
at android.app.ActivityThread.-wrap12(ActivityThread.java)
at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1489)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:154)
at android.app.ActivityThread.main(ActivityThread.java:6178)
at java.lang.reflect.Method.invoke(Native Method)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:891)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:781)
04-08 02:47:08.873 874-900/? W/ActivityManager: Force finishing activity com.google.android.setupwizard/.network.NetworkActivity
04-08 02:47:08.903 874-900/? W/ContextImpl: Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:877 com.android.server.am.AppErrors.crashApplicationInner:370 com.android.server.am.AppErrors.crashApplication:305 com.android.server.am.ActivityManagerService.handleApplicationCrashInner:13554 com.android.server.am.ActivityManagerService.handleApplicationCrash:13536
04-08 02:47:08.906 874-900/? E/ActivityManager: Sending non-protected broadcast projekt.substratum.APP_CRASHED from system 874:system/1000 pkg android
java.lang.Throwable
at com.android.server.am.ActivityManagerService.checkBroadcastFromSystem(ActivityManagerService.java:17973)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:18545)
at com.android.server.am.ActivityManagerService.broadcastIntent(ActivityManagerService.java:18636)
at android.app.ContextImpl.sendBroadcast(ContextImpl.java:881)
at com.android.server.am.AppErrors.crashApplicationInner(AppErrors.java:370)
at com.android.server.am.AppErrors.crashApplication(AppErrors.java:305)
at com.android.server.am.ActivityManagerService.handleApplicationCrashInner(ActivityManagerService.java:13554)
at com.android.server.am.ActivityManagerService.handleApplicationCrash(ActivityManagerService.java:13536)
at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:1660)
at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:2813)
at android.os.Binder.execTransact(Binder.java:565)
To fix an issue, connect your device to PC, open ADB and write this:
Code:
adb shell svc wifi enable
After that you'll pass the screen.
Cheers
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Genius!
Many thanks, worked first try.
Went to c:
Went to c: adb
Ran your command
Passed.

ydv21yash said:
command executed but not working..
only shows setup wizard has stopped
Click to expand...
Click to collapse
Send me a logcat, maybe it's something other.
Sent from my Nexus 5 using Tapatalk

ydv21yash said:
For those who have a force closing/crash on first boot (setup wizard) because of GAPPS, have just to enable wifi manually via ADB.
This is a problem which cause a crash:
To fix an issue, connect your device to PC, open ADB and write this:
command executed but not working..
only shows setup wizard has stopped
Click to expand...
Click to collapse
boot into recovery and delete folder in priv-apps.

Camera/HAL issue with official LOS

A big thank you to all the devs who made the official rom possible!
I just installed an app (EU Exit: ID Document Check) that needs to use the camera to scan a document. When the app switches to the camera, I only see a black screen. The logs seem to indicate that the app is calling into HAL to use the camera but for some reason the connection fails. Has anyone seen this before? Other apps do not seem to have a problem using the camera.
Code:
01-27 15:42:24.609 3025 3025 E Camera3-Device: Camera 0: waitUntilDrainedLocked: Error waiting for HAL to drain: Connection timed out (-110)
01-27 15:42:24.609 3025 3025 E Camera2Client: notifyError: Error condition 1 reported by HAL, requestId -1
01-27 15:42:24.712 3025 3025 D CameraTraces: Process trace saved. Use dumpsys media.camera to view.
01-27 15:42:24.712 3025 3025 E Camera2Client: stopPreviewL: Camera 0: Waiting to stop streaming failed: Connection timed out (-110)
01-27 15:42:24.718 3025 3499 E Camera3-Device: Camera 0: createDefaultRequest: Device has encountered a serious error
01-27 15:42:24.718 3025 3499 E Camera2-StreamingProcessor: updateRecordingRequest: Camera 0: Unable to create default recording request: Function not implemented (-38)
01-27 15:42:24.718 3025 3499 E Camera2Client: updateRequests: Camera 0: Unable to update recording request: Function not implemented (-38)
I am happy to provide the output from dumpsys media.camera (I have the pastebin link but the rules do not allow me to post it here)
Device: SM-G920F
ROM name: Official
Build number: 14.1-20190126-NIGHTLY-zerofltexx
kernel version and its settings: 2.10.61-gab2e937 [email protected] #1

I have the same problem, do you have a solution to resolve this ?