My i9003 was half bricked!!!
So what I did was trying the root the phone by flashing ZHKPE-CFROOT-25-05-2012.tar through odin but it didn't go though and got stuck half way and I can't reboot the phone. So I tried to flash back to the ZHKPE stock rom using odin, but again it got stucked in Odin on system.rfs. Been trying for a few times but it's still stuck. So all I got now is the bricked screen, I can still get into download mode, so I was wondering if there is anyway I can revive my i9003.
PLEASE HELP someone!!!!
Ok.
Flash xxkpe with pit .
Then flash ZHKPE.
Then wipe and wipe cache through recovery.
Then you are good 2 go !!!
Enjoy
Related
My Galaxy Tab P6200 always stuck on bootloop mode after installation of CM9 ICS ROM. I update this via odin & its getting pass from odin. But while I try to wipedata/factory reset from recovery mode it cannot perform, after sometimes it automatically rebooted & stuck on bootloop page. Though download mode & recovery mode is available & Stock ICS & HC ROM installation success via odin, my device cannot boot successfully. I will try several times with diffrent stock ROM but cannot success.
NB: Stock pit not work, I found a patched pit for p6200 which works. with stock pit update always stuck on factoryfs.img
I want urgent help, please help me if you have any solution. sorry for my bad english & advance thanks for your help.
ive been having trouble with my P6200 too... the thing is that i flashed a ICS rom that actually worked but made some other tweaks to made the tab having errors... now ive been having this boot loop at the samsung galaxy logo and wont proceed... im still able to use the stock recovery & download mode is still working fine but somehow i could not make it work again...
i need help for my device...
thanx
I'm having a bootloop problem also
I flashed stock 4.1.2 jb! I first wipe/format everything using 6.0.2.7 CWM flashed stock jb 3 times already pass on all of them three.. but it seems to be still in a bootloop. It passes samsung logo then goes black no sign of the second blue logo that comes out.. When I flash CWM it flashes but the stock jb rom doesn't work..
hi plz someone help me..my fon was in Remics 1.7, then i just tried slimbean 3.0.1 then i felt my phone getting a little heat.then i entered to recovery mode then factory reset,wipe cache and reinstalled my previouse rom.but after that phone goes to black screen.then I tried to enter in download mode and tried to flash stock ddlf2 via odin..but its not booting now restarting when samsung logo appears.what to do...some one plz help me urgentlyyy.... I see a message like this when entered to recovery mode "rfs format failed on /dev/block/stl10"
Flash xxkpe with pit first when you come back to stock from rom using ext4 partition system
Sent from my GT-I9003 using Tapatalk 2
now I got an other sign of a phone ! mark and a pc icon...whats it..?
The phone ask you to flash it with odin.
It tell you that it is not connected with pc.
You wouldnt get this screen on hard brick.
So it is softbrick.
Go flash the xxkpe with pit. Than factory reset by dial *#2767*3855#
Sent from my GT-I9003 using Tapatalk 2
Problem solved.. close thread?...maybe?
Hello to all comunity,just registered but reading forum for long time ago.
I got some problem with my old samsung duos GT-S7562,it stuck at samsung logo boot.
I already tried instal cwm,but not able to enter,when combination keys apply i get yelow triangle.
Cant enter into recovery mode,i have acess to download mode,i already flashed via Odin 1.85 and last version too,2 firmware,
one for Country phone/Portugal (S7562XXALHB_S7562OXXALH5_TPH),other from JED( S7562XXBMD6_S7562OJVBMD3_JED),
but from Rom TPH i get stuck at boot logo,with the JED firmware i get allways,update install some file,but keep restarting.
What more should i do with acess to download mode?
Backup not available,sorry for my english but im not native,hope who read,understand.
Hello guyz,after 2 days,got it done!
Flash with Odin 1.85, with this repair firmware,and 100% solved.
Take around 7 minutes do done the job.
Odin v1.85
Full flash repair with Pit inclued
Hope it will help someone. Ty
Cant post external links,how i upload here the files?
Good Day Everyone. My Samsung Note 10.1 started the other day with a bootloop. I couldn't enter recovery so I downloaded odin and a stock Rom from sammobile for the device. I did the reflash it says pass and still was in the bootloop without access too the recovery. I did the reflash in odin with NAND Erase All ticked and instead of using PDA to select Rom I used CSC. It flashed and booted and showed the samsung Logo and stayed there for about 30 min. After a while it showed the recovery mode menu with the driod laying down with a red traingle and exlimation mark. I can't seam to get the Tablet back up and running and really need help and advice. Please can someone help me because the device doesn't work with Kies and that is why I tried Odin v3.10.7. Any suggestions would be appreciated
NAND Erase All ticked
.
Never ever do that .
Well you now need a service centre repair .
@silent001
do you fixed your problem?
Hey guys,I just got that phone and managed to mess it up real good!I tried to flash stock 4.4.4 rom and odin failed at system.now the phone is stuck at emergency mode.I cant install odin to use emergency recovery,it tells me i am not connected to the internet.All stock roms i try to flash fail when odin gets to system.That has as never happened before.any help will be appreciated !
UtokUser said:
Hey guys,I just got that phone and managed to mess it up real good!I tried to flash stock 4.4.4 rom and odin failed at system.now the phone is stuck at emergency mode.I cant install odin to use emergency recovery,it tells me i am not connected to the internet.All stock roms i try to flash fail when odin gets to system.That has as never happened before.any help will be appreciated !
Click to expand...
Click to collapse
It sounds like you need to repartition your phone by flashing a rom with a pit file included. I'm not sure if kies emergency firmware rescue is available for your device as that would have a pit file included. Try asking in this thread here
http://forum.xda-developers.com/android/development/4-4-4-5-1-1-6-0-1-samsung-xcover3-t3465132
Good luck
Sawdoctor