My phone wont pull down the OTA after loading the stock image. - Verizon Samsung Galaxy S III

I used this http://forum.xda-developers.com/showthread.php?t=1755386 and now it wont update to the newest OTA. I locked the bootloader, reset the flash counter, reloaded the stock image and nothing seems to work. I need to send this phone back to Verizon.
Edit: **** it, I just flashed the newest Odin OTA, http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip
I doubt Verizon techs will know any better.

When did this ota role out wonder what it is???
Sent from Vzw Galaxy SIII running CleanROM 2.0 w/CleanKERNEL

ForeverSupra said:
I used this http://forum.xda-developers.com/showthread.php?t=1755386 and now it wont update to the newest OTA. I locked the bootloader, reset the flash counter, reloaded the stock image and nothing seems to work. I need to send this phone back to Verizon.
Edit: **** it, I just flashed the newest Odin OTA, http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip
I doubt Verizon techs will know any better.
Click to expand...
Click to collapse
What were you running for a ROM on your phone? Did you flash the stick kernel back to?
-Need to figure out how to do something with your phone? Check out this Guide
-Did my rantings somehow help you? Hit the thanks button [email protected] :silly:
-Sent from my Synergized SIII

Related

If you recieve a new update..tonight/tomarrow

if anyone gets the rumored new update coming tonight/tomarrow, and takes it succesfully. make sure your rooted, and have adb setup, and access to a computer..then please pm me. thanks.
TO BE ABLE TO TAKE AN OTA. YOU CAN BE BOOTED. BUT YOU MUST:
have stock recovery...it can flashed with odin. see here:http://forum.xda-developers.com/showthread.php?p=19760508
you must also have all bloatware. INTACT.and i suggest NOT FROZEN.
if you lose root .....you can easily re-root. with odin. by flashing cwm recovery.tar in doin......then booting to cwm recovery and flashing...the superuser.zip...see here:http://forum.xda-developers.com/showthread.php?p=19223405
I forgot to get back to you a few days ago, sorry (I was busy, new kid on the way and working on the house like crazy). When I did get a chance to look at my phone, the update was gone.
I will see what I can do with this update, but I am not going to install it till everyone else has I need my phone too much to let ATT screw it up, I will however, try to get the download.
silver03wrx said:
TO BE ABLE TO TAKE AN OTA. YOU CAN BE ROOTED. BUT YOU MUST:
have stock recovery...it can flashed with odin.... you must also have all bloatware INTACT (NOT FROZEN)...
you must also not have removed any of ciq.
Click to expand...
Click to collapse
your last bullet (not have removed any CIQ) means anyone wanting to take update CANNOT have the UCLA3 rom/kernel/modem installed as well... correct? (ATT OTA, cd's, or yours since all of these have CIQ removed already). Do we need to be on a stock UCKJ2 like we did for last week's OTA to work... or will stock UCKK1 (your stock CWM KK1) accept update? If not, is there a UCKJ2 CWM rom/kernel zip package?
DoctorQMM said:
your last bullet (not have removed any CIQ) means anyone wanting to take update CANNOT have the UCLA3 rom/kernel/modem installed as well... correct? (ATT OTA, cd's, or yours since all of these have CIQ removed already). Do we need to be on a stock UCKJ2 like we did for last week's OTA to work... or will stock UCKK1 (your stock CWM KK1) accept update? If not, is there a UCKJ2 CWM rom/kernel zip package?
Click to expand...
Click to collapse
no i mean if your on kk1 or kj2 and tamper with the ciq files. it may prevent you from recieving it..... or mabye not..since ucla3 is ciq free.... hard to say . but i removed that from the op. hoping this update works lol with no data issues. but im sure there will be some bugs
if i had a skyrocket id probobly odin the kj2 stock tar, and wait for the ota...once atleast one person confirmed it was pushing out.
Sent from my SAMSUNG-SGH-I727 using xda premium
I'm restoring my phone to stock now, and will wait for an OTA
Sent from my Rocket that is in the Sky!
Making a nandroid backup as I type this.
Flashed back to stock recovery in anticipation, but no update just yet....as of about 10:30pm Eastern time...
I've been checking still nothing.
Sent from my SAMSUNG-SGH-I727 using xda premium

(Help please) Verizon warning triangle after trying to update to 4.3 from 4.1.2

I'm in need of some serious help here guys. Tonight I tried to update my rooted s3 on 4.1.2 to the new update 4.3. I accepted the download and after the download I installed it. My phone booted into the yellow Verizon triangle telling me it noticed I have unauthorized programs on my phone not authorized by Verizon and to turn the phone off and take it into Verizon. I tried to boot into clockwork recovery and it would not let me and booted back to the yellow Verizon triangle.
I have no idea what to do, did I permanently brick my phone or can I get back to 4.1.2 some how? I would greatly appreciate any information pointing in the direction to fix this.
I managed to recover my phone! I pulled the battery and sim card prior to signing up on xda because I read someone having the same issue on a note 2. Once the battery and sim is removed let it set for a half hour then place the sim and battery back into the phone. Once they were back in the phone press the power button ,it should boot right up as it normally would. I'm not saying there isn't more than one way of fixing this issue but this method worked for me and I thought I would share for those who might experience this yellow triangle notification as well. On a side note it did not successfully updated my phone but returned me back to 4.1.2
You need to be 100% stock to take an OTA (unrooted, stock recovery). The easiest way to get to that state is to ODIN a stock factory image. This will delete your internal storage.
Was your bootloader unlocked prior to trying to update to 4.3? I'm assuming so if you were running CWM recovery.
I actually had the same problem and am trying to fix right now. I tried running rootkeeper before the update, but that obviously didn't work. Anyone know where I can get the 4.1.2 image to flash? Also, do i need to do that "Triangle Away"? My custom binary dL says "Yes (4 counts)."
irl5fan said:
I actually had the same problem and am trying to fix right now. I tried running rootkeeper before the update, but that obviously didn't work. Anyone know where I can get the 4.1.2 image to flash? Also, do i need to do that "Triangle Away"? My custom binary dL says "Yes (4 counts)."
Click to expand...
Click to collapse
Triangle Away is free for XDA members. Must be stock rooted to work. Won't work on every rom. May have to odin stock, root run Triangle and then Odin Stock again. Remove tar from MF1 zip to Odin. Once on 4.3 there is no return and no unlock. Can run Saferoot to root. Do not try to unlock or flash custom recovery or device will brick.
Triangle Away- http://forum.xda-developers.com/showpost.php?p=22462960&postcount=1
MF1- http://www.androidfilehost.com/?fid=23134718111254196
BattsNotIncld said:
You need to be 100% stock to take an OTA (unrooted, stock recovery).
Click to expand...
Click to collapse
You sure about that? Seems quite a few people were on 4.1.2 stock + rooted, took the update, and went to 4.3 fine, but lost root.
Quite a few in the main 4.3 thread.
BattsNotIncld said:
You need to be 100% stock to take an OTA (unrooted, stock recovery). The easiest way to get to that state is to ODIN a stock factory image. This will delete your internal storage.
Was your bootloader unlocked prior to trying to update to 4.3? I'm assuming so if you were running CWM recovery.
Click to expand...
Click to collapse
Yes my bootloader is unlocked. I think I'm going to postpone the 4.3 update until I hear better reviews. I have seen posts on here where people are having issues after taking the update. I simply did not know what was going on if I had hard bricked my device or not, luckily I did not and was able to get back to 4.1.2
Rsc25 said:
Yes my bootloader is unlocked. I think I'm going to postpone the 4.3 update until I hear better reviews. I have seen posts on here where people are having issues after taking the update. I simply did not know what was going on if I had hard bricked my device or not, luckily I did not and was able to get back to 4.1.2
Click to expand...
Click to collapse
I updated my wifes Via the OTA and she has had 0 issues. I think most of the issues people are having after the OTA are self inflicted.
stock image
BattsNotIncld said:
You need to be 100% stock to take an OTA (unrooted, stock recovery). The easiest way to get to that state is to ODIN a stock factory image. This will delete your internal storage.
Was your bootloader unlocked prior to trying to update to 4.3? I'm assuming so if you were running CWM recovery.
Click to expand...
Click to collapse
just wonderingim trying to get a stock vrbm1 tar but every link I try is down I did have it on a usb but lost it, originally from dark menace if you know of another source would be great ive downloaded a few but md5 doesn't match

[Q] HELP ME!! I f$*ked my phone up royally!

Okay, kind of a noob. I have the Samsung Galaxy S3 Verizon. I was on 4.1.2 rooted using Beanstown 106 method, and was running axis rom. It was ok but 4.3 came out & I wanted to try it, since the rom had excellent performance, but a lot of little bugs that were bothering me. I shut the root off in the SU accepted the 4.3 ota update and everything was fine except for when the phone would boot up it showed the samsung logo with an unlock padlock and said custom.. Not a big deal but I liked the 4.3 so wanted to take away the boot unlock icon (just in case for warranty purposes). It was my understanding if I would ODIN back to stock it would go away. Long story short in between trying to odin to stock, Kies back to stock and every other method I can find, my phone is stuck in ODIN/download mode and won't do anything else. I've searched everywhere and cannot figure it out. In odin mode the phone says something like Software upgrade error, use software repair assistant or something like that. Don't know what to try or do, and stuck using a razr until I get my GS3 back. Please help!!!
Didn't accept the OTA, but from what others have posted, it sounds like the correct way to do it is to revert to stock, unroot, relock bootloader and use triangle away to reset counter, then accept the OTA. If you dont use triangle away prior to accepting OTA, you get the unlock icon + custom. Once you accept the OTA, trying to revert to anything else or flashing a custom recovery will result in a hard brick.
Sent from my SCH-I535 using Tapatalk
Shibby87 said:
Didn't accept the OTA, but from what others have posted, it sounds like the correct way to do it is to revert to stock, unroot, relock bootloader and use triangle away to reset counter, then accept the OTA. If you dont use triangle away prior to accepting OTA, you get the unlock icon + custom. Once you accept the OTA, trying to revert to anything else or flashing a custom recovery will result in a hard brick.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Well then I'm hard bricked, because I tried to ODIN back to stock as well as KIES and they both just say fail..
I just fixed my phone with verizon software utility. My guide should be up with the utility sometime tonight. If you can get into bootloader it will flash SCH-I535_I535VRUCML1 I tried to get the files it downloaded but there not odin files or zips.
Hopefully this helps http://forum.xda-developers.com/showthread.php?t=2586319
ThePagel said:
Hopefully this helps http://forum.xda-developers.com/showthread.php?t=2586319
Click to expand...
Click to collapse
Holy **** I can't wait to get home and try this! Hopefully it works, thank you!

[Q] flashing locked bootloader doesn't stick?

So, my phone is running 4.1.2 rooted, and it got an OTA recently. The OTA failed because the bootloader was unlocked.
I thought easy-peasy, just odin flash the locked boot loader and download/apply OTA again, right?
Flashed fine, locked and clean for initial boot. But when it went to install the OTA, same problem happened, the bootloader was miraculously unlocked again, and the OTA failed.
Any ideas on how I can get past this? I really don't mind loosing root, just trying to avoid a complete odin reflash and loosing everything...
I am just curious ... why would you want to update to the OTA 4.3 and forever lock down the bootloader? Once the verizon 4.3 update takes hold, you might be able to root, but (so far) will not be able to load custom roms without bricking the device.
vax1170 said:
I am just curious ... why would you want to update to the OTA 4.3 and forever lock down the bootloader? Once the verizon 4.3 update takes hold, you might be able to root, but (so far) will not be able to load custom roms without bricking the device.
Click to expand...
Click to collapse
Well your almost right. First off you for sure can root. Second you can install custom roms with safestrap. Its limited to tw roms atm. There have been a hand full of people who upgraded just to use safestrap. I wouldnt recomend it right now because its alittle buggy.
RedBullet said:
So, my phone is running 4.1.2 rooted, and it got an OTA recently. The OTA failed because the bootloader was unlocked.
I thought easy-peasy, just odin flash the locked boot loader and download/apply OTA again, right?
Flashed fine, locked and clean for initial boot. But when it went to install the OTA, same problem happened, the bootloader was miraculously unlocked again, and the OTA failed.
Any ideas on how I can get past this? I really don't mind loosing root, just trying to avoid a complete odin reflash and loosing everything...
Click to expand...
Click to collapse
Wife's phone. She doesn't want to mess with it.
I think I figured it out, looks like I had a custom recovery installed. Flashed that to stock and locked bootloader and all is fine now. Running latest and greatest. Just what the missus is looking for...
RedBullet - Ah, I fully understand now I'm having a similar conversation with my misses.
ThePagel - Thanks. One one of my phones was cursed with an accidental OTA 4.3 upgrade. Nice to know something is in the works, I'll dig up that thread and watch it.
vax1170 said:
RedBullet - Ah, I fully understand now I'm having a similar conversation with my misses.
Click to expand...
Click to collapse
I assume if one wants to go the custom ROM route they would simply need to odin flash one of the older stock images and go from there. Doesn't seem like a big problem. Of course > 50% chance I have no idea what I'm talking about...
RedBullet said:
I assume if one wants to go the custom ROM route they would simply need to odin flash one of the older stock images and go from there. Doesn't seem like a big problem. Of course > 50% chance I have no idea what I'm talking about...
Click to expand...
Click to collapse
If you take the 4.3 OTA, you cannot odin flash an older stock image. Will brick your device.
landshark68 said:
If you take the 4.3 OTA, you cannot odin flash an older stock image. Will brick your device.
Click to expand...
Click to collapse
Really? That is pretty tragic. I may only buy unlocked devices from here on out; they seem to be getting better and better at making their devices less and less useful...
It sure is sad but true. Im thankful google blessed us with the nexus 5
RedBullet said:
Really? That is pretty tragic. I may only buy unlocked devices from here on out; they seem to be getting better and better at making their devices less and less useful...
Click to expand...
Click to collapse

[FIRMWARE] VRUDNE1 (Android 4.4.2 - Kit Kat) No-Wipe Factory Image

WARNING: I am posting this for development purposes only (and for those of you already on the new locked bootloader)!
If you have an unlocked bootloader or are still on MF1 firmware, DO NOT flash this in ODIN or you will be permanently locked down to the new bootloader with no way of going back!
Those of you who know how to work with this file feel free to use it as you see fit. Otherwise, consider yourself warned!
Download: http://www.androidfilehost.com/?fid=23501681358553154
First!
Hairiest chest?
Can't wait till you guys crack this open for us unlocked folks!
i need to send my phone back into verizon. if i odin this i will be cool right?
Cannot wait for baseband update, hopefully it will be pulled separate soon.
So what does no-wipe mean?
Currently I am on NC1. If I want to odin to NE1 with fresh start, will this no-wipe affect in anyway?
You couldn't just flash the system and kernel partitions?
Sent from my GT-P5110 using Tapatalk 2
ruokuo said:
So what does no-wipe mean?
Currently I am on NC1. If I want to odin to NE1 with fresh start, will this no-wipe affect in anyway?
Click to expand...
Click to collapse
Means it is exactly the same as OTA. Does not wipe data. No difference flashing it and letting Verizon update it except Odin will unroot for you. Must unroot or hide root to take OTA.
kuronosan said:
You couldn't just flash the system and kernel partitions?
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
Won't boot with 4.3 firmware. It all or nothing for now or we would already have it fixed in dump thread.
Worked like a charm! Now I'll wait and see how to root this baby. I already had the locked bootloader so figured I didn't have anything to lose. Thanks!
gherman222 said:
Worked like a charm! Now I'll wait and see how to root this baby. I already had the locked bootloader so figured I didn't have anything to lose. Thanks!
Click to expand...
Click to collapse
Towelroot works.
Is there a version of this with an unlocked bootloader? I currently am running my S3 rooted and unlocked with 4.1.2. Do I need to run a ROM instead - and if so is there one that is stock 4.4.2 with an unlocked bootloader?
v1ncent said:
Is there a version of this with an unlocked bootloader? I currently am running my S3 rooted and unlocked with 4.1.2. Do I need to run a ROM instead - and if so is there one that is stock 4.4.2 with an unlocked bootloader?
Click to expand...
Click to collapse
They are currently at Work our beloved developers trying to bring us a rooted touch wiz version for those with unlocked bootloader in tact and the very first of it's kind I might add. Do not flash this if your bootloader is of value and be patient as the very best of the best of developers are collaborating to bring it to us.
Sent from my SCH-I535 using XDA Free mobile app
MIKEYSAKZ said:
They are currently at Work our beloved developers trying to bring us a rooted touch wiz version for those with unlocked bootloader in tact and the very first of it's kind I might add. Do not flash this if your bootloader is of value and be patient as the very best of the best of developers are collaborating to bring it to us.
Click to expand...
Click to collapse
Thanks - I have patience and definitely planning on waiting. That's why I still have an unlocked bootloader
prdog1 said:
Means it is exactly the same as OTA. Does not wipe data. No difference flashing it and letting Verizon update it except Odin will unroot for you. Must unroot or hide root to take OTA.
Won't boot with 4.3 firmware. It all or nothing for now or we would already have it fixed in dump thread.
Click to expand...
Click to collapse
Hello, how can i load in this firmware another modem like VRLHD, or there is some other way to install modem ?
P.s i have issue with sms/mms/i-net cuz of stock modem.
leroyinc said:
Hello, how can i load in this firmware another modem like VRLHD, or there is some other way to install modem ?
P.s i have issue with sms/mms/i-net cuz of stock modem.
Click to expand...
Click to collapse
Sounds like you borked your radios. Or your APN is missing. Only thing can do is run that tar. Can try running Verizon Software Updater in repair mode. It will wipe and then flash tar. If don't fix have to get new device from Verizon.
prdog1 said:
Sounds like you borked your radios. Or your APN is missing. Only thing can do is run that tar. Can try running Verizon Software Updater in repair mode. It will wipe and then flash tar. If don't fix have to get new device from Verizon.
Click to expand...
Click to collapse
hmm, i can't ask for new phone cuz im from another country, everything works on 4.2, but whe i updated to 4.3 i done with my phone
but what about Software Updater in repair mode, where is this ?
---------- Post added at 11:29 PM ---------- Previous post was at 11:01 PM ----------
prdog1 said:
Sounds like you borked your radios. Or your APN is missing. Only thing can do is run that tar. Can try running Verizon Software Updater in repair mode. It will wipe and then flash tar. If don't fix have to get new device from Verizon.
Click to expand...
Click to collapse
mms works, didnt know why wont work sms
leroyinc said:
hmm, i can't ask for new phone cuz im from another country, everything works on 4.2, but whe i updated to 4.3 i done with my phone
but what about Software Updater in repair mode, where is this ?
---------- Post added at 11:29 PM ---------- Previous post was at 11:01 PM ----------
mms works, didnt know why wont work sms
Click to expand...
Click to collapse
Make sure you are in Global mode before try any of this. If go with Software updater it is going to update you to 4.4.2. Not sure if can stop after repair or not. If that 4.3 tar in odin don't fix this is about only option I know of. Since bootloader is locked cannot use the fixes we have for this problem.
http://www.verizonwireless.com/support/devices/knowledge_base.html/80200/
open1your1eyes0 said:
WARNING: I am posting this for development purposes only (and for those of you already on the new locked bootloader)!
If you have an unlocked bootloader or are still on MF1 firmware, DO NOT flash this in ODIN or you will be permanently locked down to the new bootloader with no way of going back!
Those of you who know how to work with this file feel free to use it as you see fit. Otherwise, consider yourself warned!
Download: http://www.androidfilehost.com/?fid=23501681358553154
Click to expand...
Click to collapse
Is it safe to flash the modem only, in recovery, with existing mf1 firmware?
Thanks.
Sent from my SCH-I535 using XDA Free mobile app
I am on MF1 rooted and unlocked but I have had the phone since it's release and have no interest in installing AOSP ROMs. I do need root because I have to be able to use root explorer or similar so I can edit the "keys" system files to disable the "WAKE" function of the home key. I keep my phone in my back pocket and it constantly turns on if the home key has wake enabled.
Before I flash this I wanted to confirm that flashing this No-Wipe Factory Image with Odin, I can root with Towelroot and install Root Explorer? Would I also be able to install TW based ROMs like a new Clean Rom if Scott gets one figured out? Would I also be able to create nandroids using Clockwork or TWRP?
Lastly, Since my most recent install of CR 8.2 my phone's behavior has been a bit sketchy (random reboots, laggy, etc). I assume if I flash this stock image it should return my phone to whatever level of performance "stock" yields, without any of my current, likely self imposed, performance issues?
I have never had a phone this long and expect I'll get a new one whenever there really is a "next big thing", but I don't think we're there yet.
Thanks in advance.
Going back to stock
So, if I want to go back to stock, this is the way?
I'm on beanstalked / MF1 rooted and unlocked of course. But I'd like to get the phone back to stock condition so I can sell it here soon.

Categories

Resources