Related
I have a rooted, unlocked SG3 running stock ROM and as of a couple weeks ago, continue to get prompted to install the OTA update (VRAGL7 I believe). Unsurprisingly the install fails when I try to apply it.
My question is, do I have to restore in order to apply this update? And if so, is it possible to instead defer the update indefinitely (since I dont want to restore and there doesnt appear to be anything useful in this update according to their site).
Im also sure someone else must have asked this before, but after browsing the last few pages and searching, I couldnt find anything. Feel free to direct me to a previous response if I missed it.
Thanks in advance!
This has been covered numerous times, but, here you go. If you want to take the update, lock your bootloader, Odin back to stock, take the OTA update, reroot, unlock, etc.
If you don't want to do that, freeze SDM 1.0 with Titanium and the message will stop. One thing though, you will not be able to update OTA until you restore SDM. Which, you shouldn't be updating a rooted phone to begin with unless you want a world of problems.
Good luck!
Sent from my SCH-I535 using xda premium
So to be clear, absolutely no way to apply the update without going back to stock first, correct?
Sorry for posting up whats probably been asked 100 times, but really couldnt track it down with a search and browse of the last few pages.
Thanks again.
timofcourse said:
So to be clear, absolutely no way to apply the update without going back to stock first, correct?
Sorry for posting up whats probably been asked 100 times, but really couldnt track it down with a search and browse of the last few pages.
Thanks again.
Click to expand...
Click to collapse
I did not have to do all that...
I used Mobile Odin Pro to Pre-Inject Root into the OTA Update before flashing it, then I flashed the latest modem immediately after flashing the OTA update.
I didn't lose Root or Unlocked Bootloader status..
Best part of it was... I didn't need my PC to do any of it...
The following thread is the one you should read in detail..
http://forum.xda-developers.com/showthread.php?t=1887741
Perfect. Exactly what I was looking for.
Thanks again.
timofcourse said:
Perfect. Exactly what I was looking for.
Thanks again.
Click to expand...
Click to collapse
Glad to help..
tekrhino said:
I did not have to do all that...
I used Mobile Odin Pro to Pre-Inject Root into the OTA Update before flashing it, then I flashed the latest modem immediately after flashing the OTA update.
I didn't lose Root or Unlocked Bootloader status..
Best part of it was... I didn't need my PC to do any of it...
The following thread is the one you should read in detail..
http://forum.xda-developers.com/showthread.php?t=1887741
Click to expand...
Click to collapse
Make sure that you read it and pay attention very carefully. I tried to do the same exact thing and had problems. Had to Odin back to stock. I think my problem was that I was running a custom kernel. Anyway I got the unauthorized software message and could only get into stock recovery and download mode.
Guess I will read the thread myself and see where I screwed up at.
Sent from my SCH-I535 using xda premium
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
yup your bootloader is still locked
check the downloads thread and use version 1.2.
That means your boatloader is locked. You now must Odin back to stock and start over. Droid style has a guide stickied in the development thread. Follow section 6 of it.
Next time use ez unlock version 1.2 to unlock you boatloader.
Sent from my SGS3 running Eclipse 2.1
downloads list
http://forum.xda-developers.com/showthread.php?t=1850506
tekrhino said:
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
Click to expand...
Click to collapse
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Prophotog said:
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Click to expand...
Click to collapse
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Thanks to everyone!! Looks to be a long night. :>)
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
I lol'ed at your post. A little dramatic, don't you think? He's not even close to bricked. Just Odin from download mode back to stock, and redo the steps with bootloader unlock.
Here is a gift (working ez-unlock v1.2)
http://dl.dropbox.com/u/42057363/com.mmmeff.ez.unlock_3.apk
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Prophotog said:
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Click to expand...
Click to collapse
No need to do the boot chains. Just follow section 5 of this guide and I recommend root 66 for the ROM you flash
http://forum.xda-developers.com/showthread.php?p=28530394
Sent from my SGS3 running Eclipse 2.1
tekrhino said:
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Click to expand...
Click to collapse
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Prophotog said:
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Click to expand...
Click to collapse
And just for future reference, it's Dalvik, not Kelvic
Sent from my SCH-I535 using xda app-developers app
Prophotog said:
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Click to expand...
Click to collapse
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
kintwofan said:
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
Click to expand...
Click to collapse
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Prophotog said:
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Click to expand...
Click to collapse
Cool, I take it you're up and running again. Just make sure you use ez unlock 1.2 next time. And the positive is you're an Odin pro now!
Sent from my SGS3 running Eclipse 2.1
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Alex0826 said:
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Click to expand...
Click to collapse
Sprint kernel is causing the inversion. Flash a vzw kernel. Read first flash later.
Sent from my SCH-I535 using xda app-developers app
Who ever did your flash might not done it right cause ya not supposed to lose a flash like that unless he didn't do things right. I can factory reset mine and I wont loose flash
Sent from my SPH-L900 using Tapatalk 2
Hi All:
I was having some signal quality issues and Verizon had my apply the newest software update available. I was rooted, but after the update i lost root. It said the update failed, but it also says my phone is up to date. Now when I reboot the phone one of the screens says "Samsung Custom" with a a picture of an un-locked lock (i don't believe it showed that before).
1) Can i go through the process of rooting again without screwing up my phone? Do i need to do anything prior to rooting again if I can root again?
2) What does that screen on the reboot menu mean?
3) Should i bother to do Verizon software updates in the future?
Sorry if this has been covered elsewhere, I couldn't find a thread in my search. Thanks for your help!
This has been discussed to death, especially in the thread that YOU read to root your phone. You NEVER take an OTA update when rooted. You will most defiantly lose root with the possibility of locking your bootloader and never being able to root again or unlock the bootloader. Since you are this deep, you can do 1 of 2 things. 1. Sit tight and see what is figured out. 2. Odin to a pre-rooted image, restore your backup, and wait to see what the devs say about it.
HHF2 said:
This has been discussed to death, especially in the thread that YOU read to root your phone. You NEVER take an OTA update when rooted. You will most defiantly lose root with the possibility of locking your bootloader and never being able to root again or unlock the bootloader. Since you are this deep, you can do 1 of 2 things. 1. Sit tight and see what is figured out. 2. Odin to a pre-rooted image, restore your backup, and wait to see what the devs say about it.
Click to expand...
Click to collapse
Well I guess I forgot that little bit of valuable information. So does that reboot screen just mean my bootloader is locked? Also, my backup was deleted somehow during the update process. I tried to go into recovery and load my backup, but it is no longer available.
If you have an unlocked lock, I would thing that would mean unlocked, right? Do you still have your custom recovery?
fillyo said:
If you have an unlocked lock, I would thing that would mean unlocked, right? Do you still have your custom recovery?
Click to expand...
Click to collapse
I have ROM Manager, which i used to access CWM. But if i try to boot into recover from a power off state it says "System Software not authorized by VZW has be found on your phone. Please turn off your phone and go to the nearest VZW store for help." At the top of that screen in red it says "Secure Fail: Kernel." So that leads me to believe I don't have a custom recovery anymore, correct?
irl5fan said:
Well I guess I forgot that little bit of valuable information. So does that reboot screen just mean my bootloader is locked? Also, my backup was deleted somehow during the update process. I tried to go into recovery and load my backup, but it is no longer available.
Click to expand...
Click to collapse
Follow the steps here to root the new OTA: http://forum.xda-developers.com/showthread.php?t=2046439. The unlocked lock and custom when you boot up actually does mean that your bootloader has been relocked. Strange way to show it though. You could wait until mrRobinson updates his no wipe odin factory images but that might be a couple days. I always use that method instead.
BigErnM said:
Follow the steps here to root the new OTA: http://forum.xda-developers.com/showthread.php?t=2046439. The unlocked lock and custom when you boot up actually does mean that your bootloader has been relocked. Strange way to show it though. You could wait until mrRobinson updates his no wipe odin factory images but that might be a couple days. I always use that method instead.
Click to expand...
Click to collapse
Ok yeah I'll check that out if he updates this week. Do I need to do a factory reset or anything or just leave my phone as is for now?
Sent from my SCH-I535 using xda app-developers app
You don't have to reset anything if you don't want to. You can flash the full wipe or no wipe version. Everybody has their own preferences, I like the no-wipe versions. I usually avoid taking the Verizon OTAs directly by disabling the software update service with Titanium Backup Pro since they screw up root and the bootloader. I wait until there is an ODIN flashable image of it. Others prefer to take the OTA and root using the guide above, or flash the odex or deodex versions in recovery like the ones here: http://forum.xda-developers.com/showthread.php?t=2177798.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
So after seeing KitKat in action, I hunted down an Android phone eligible for a KitKat ROM. I traded my iPhone for a Verizon Samsung Galaxy S3 (i535) I got it rooted and CWM on it just fine, and the boot loader unlocked. (or so I thought) Went into recovery and did all the steps to install the ROM, got it installed, along with G-Apps and rebooted. My phone came to a screen saying
"system software not authorized by Verizon wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help."
As far as I can tell, the boot loader was not successfully unlocked. So, it's back to stock ROM via Odin, right? :laugh:
NO! All the guides I find say to download an app to reset the binary counter. How do I do that if I have no OS to boot to?
Any Ideas? Did my enticement for KitKat get the best of me?
You shouldn't need triangle away to Odin back to stock. Triangle away would be for if you were trying to take your phone back to Verizon or Samsung for warranty work and didn't want them to know it was previously rooted.
Sent from my SCH-I535 using xda app-developers app
dustin_b said:
You shouldn't need triangle away to Odin back to stock. Triangle away would be for if you were trying to take your phone back to Verizon or Samsung for warranty work and didn't want them to know it was previously rooted.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
O, thanks for clearing that up. So what's my next step to getting it back to a working phone?
jcaauwe said:
O, thanks for clearing that up. So what's my next step to getting it back to a working phone?
Click to expand...
Click to collapse
Follow the instructions in section 5 of this guide: http://forum.xda-developers.com/showthread.php?t=1762709. This will get you back to stock and unrooted. Then you will have to do the root unlock processs again.
Sent from my SCH-I535 using xda app-developers app
dustin_b said:
Follow the instructions in section 5 of this guide: http://forum.xda-developers.com/showthread.php?t=1762709. This will get you back to stock and unrooted. Then you will have to do the root unlock processs again.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
and or use the casual all in one tool and follow root, and flash insecure aboot then download Rom manager from google play and install latest CWM
I just had my s3 replaced under warranty. The new one, I used casual to root/unlock, etc. Worked great! I think I let casual install everything then flashed CM from recovery.
Sent from my SCH-I535 using xda app-developers app
jcaauwe said:
O, thanks for clearing that up. So what's my next step to getting it back to a working phone?
Click to expand...
Click to collapse
Not sure what you are trying to achieve, but once you get it back to functional and rooted, I would recommend you try out some of the wonderful custom TouchWIz ROMs on the forum here. They have most of if not more features than are in Kit Kat and there are no fully functional Kit Kat ROMSs for the S3 yet. Plus thse ROMs are stable and all your Samsung features will work properly . MORA, Hyperdrive, Synergy, and Jelly "beans" are good examples of excellent ROMs.
So I figured out what went wrong, and I'm still kicking myself for how stupid of problem it was. The reason Odin didn't want to work was because I was using the front USB ports on my system, which are not USB 2.0... I spent 6 hours trying to figure it out. So I hooked it up to a rear USB port, flashed it back to stock ROM, redid the Root, unlocked bootloader (which I didn't do in the first place) and now I'm getting Cyanogenmod on it.
Thanks everyone for the help! I hope anyone else who comes across this who where in the same boat I was can figure it out.
Sometimes it's a user-error.
Fix
jcaauwe said:
So after seeing KitKat in action, I hunted down an Android phone eligible for a KitKat ROM. I traded my iPhone for a Verizon Samsung Galaxy S3 (i535) I got it rooted and CWM on it just fine, and the boot loader unlocked. (or so I thought) Went into recovery and did all the steps to install the ROM, got it installed, along with G-Apps and rebooted. My phone came to a screen saying
"system software not authorized by Verizon wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help."
As far as I can tell, the boot loader was not successfully unlocked. So, it's back to stock ROM via Odin, right? :laugh:
NO! All the guides I find say to download an app to reset the binary counter. How do I do that if I have no OS to boot to?
Any Ideas? Did my enticement for KitKat get the best of me?
Click to expand...
Click to collapse
i know you say you are ROOT but why dont you check using ROOT CHECKER download it from the play store its gonna tell you if you are root or not. im using sspencer10 KITKAT 4.4 CM11 and is running pretty smooth why don't you try it out just download the .zip reboot into RECOVERY i preffer you use TWRP (last version) go to whipe>advanced wipe and clear, Dalvik Cache>System>Data>Cache (optional i alwayz check mark Internal storage looking for space and alwayz make a clean flash same as Format Data) make sure you backup everything first using Titatinium Backup go back, then go to Install search for your .zip file on ur SDCard or Internal Storage first select the ROM ADD MORE FILE and add the GAPPS click REBOOT SYSTEM AND ENJOY YOUR NEW KITKAT 4.4 CM11 ON YOUR SGS3.
Don't be scared of Kit Kat! Once u get ur issues figured out and get 4.4 up and running you will see its all worth it!
I have a Verizon S3 and saw a new symbol in my notification bar and stupidly clicked on it without really thinking and my phone tried to update to 4.3. Well after the update I get a screen that says I'm not using official verizon software or something like that and that I need to take my phone to a verizon store to fix it. I can get to the Odin downloading screen I just don't know how to fix it from there. Please help I really don't have the money to buy a new phone right now. Any advice would be welcome
It depends on what is happening to your phone. Is it working or not? Can you tell us what android version is loaded currently?
vax1170 said:
It depends on what is happening to your phone. Is it working or not? Can you tell us what android version is loaded currently?
Click to expand...
Click to collapse
It starts up and after the samsung logo. I get the message System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and to the nearest Verizon Wireless store for help. At the top in red it also says secure fail: kernal. I believe I'm running Android 4.1.2 but I can't remember. If I hold down volume, home, and power I can get into the odin downloading screen but those are the only 2 screens I can access.
deftjangle said:
It starts up and after the samsung logo. I get the message System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and to the nearest Verizon Wireless store for help. At the top in red it also says secure fail: kernal. I believe I'm running Android 4.1.2 but I can't remember. If I hold down volume, home, and power I can get into the odin downloading screen but those are the only 2 screens I can access.
Click to expand...
Click to collapse
As long as you can get to the download screen, you can flash the official 4.3 with Odin. Dont try to go back to 4.1.2 or any custom rom as that will result in a hard brick.
Sent from my SCH-I535 using xda app-developers app
5ft24 said:
As long as you can get to the download screen, you can flash the official 4.3 with Odin. Dont try to go back to 4.1.2 or any custom rom as that will result in a hard brick.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Could you tell me how to go about flashing the official 4.3 rom with Odin. I haven't messed around with my phone in years.
deftjangle said:
Could you tell me how to go about flashing the official 4.3 rom with Odin. I haven't messed around with my phone in years.
Click to expand...
Click to collapse
First go into download mode and see if the boot chain flashed. If it didn't you should flash 4.1 not 4.3.
Once you're in download mode, post all the information it says in the top left corner.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
First go into download mode and see if the boot chain flashed. If it didn't you should flash 4.1 not 4.3.
Once you're in download mode, post all the information it says in the top left corner.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
ok this is what is in the top left corner.
ODIN MODE
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: YES (1 COUNT)
CUSTOM BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOT: ENABLE
deftjangle said:
ok this is what is in the top left corner.
ODIN MODE
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: YES (1 COUNT)
CUSTOM BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOT: ENABLE
Click to expand...
Click to collapse
You're on mf1 still.
Flash this in Odin:
http://www.androidfilehost.com/?fid=23134718111254196
Using this guide, section 5:
http://forum.xda-developers.com/showthread.php?t=1762709
Then use this to root your phone again:
http://forum.xda-developers.com/showthread.php?t=2332825
After this, I'd unlock the bootloader with ez-unlock version 1.2 to make sure it's unlocked.
When you reboot, find sdm1.0.apk and fwupdater.apk and rename them to sdm1.0.apk.bak and fwupdater.apk.bak. Or use titanium backup and freeze both of them. Then you don't have to worry about an update being pushed to your phone.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
You're on mf1 still.
Flash this in Odin:
http://www.androidfilehost.com/?fid=23134718111254196
Using this guide, section 5:
http://forum.xda-developers.com/showthread.php?t=1762709
Then use this to root your phone again:
http://forum.xda-developers.com/showthread.php?t=2332825
After this, I'd unlock the bootloader with ez-unlock version 1.2 to make sure it's unlocked.
When you reboot, find sdm1.0.apk and fwupdater.apk and rename them to sdm1.0.apk.bak and fwupdater.apk.bak. Or use titanium backup and freeze both of them. Then you don't have to worry about an update being pushed to your phone.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
This is perfect thankyou! I will let you know how it turns out
I unlock bootloader using CASUAL i read the newest version of EZ umlock can brick ur fone or give off issues
twistedillutions said:
I unlock bootloader using CASUAL i read the newest version of EZ umlock can brick ur fone or give off issues
Click to expand...
Click to collapse
Ez-unlock will brick your phone if you're on the 4.3 base. In this case it will work just fine, he's on the 4.1.2 base.
Sent from my SCH-I535 using Tapatalk 2
locked bootloader on rooted verizon galaxy s3
my phone was rooted and i mistakenly upgraded to 4.3.
i didn't have any problems rerooting my phone.
however though the phone is rooted, from what i've read i'm going to assume my bootloader is locked.
so i've decided to seek answers from the professionals.
i have root checker, rom manager, goomanager, titanium back up, root broswer, rom installer, root explorer, android root tool,superuser, super su, quickboot, terminal emulator and the hackers keyboard.
all to no avail...everytime i try to install a custom rom a message pops up on the screen saying i have unauthorized software on my phone and that i need to take it to verizon. yes from recovery mode...as a matter of fact the recovery mode won't load it just takes me to the " take my phone to verizon screen "...
just to be clear i have a galaxy s3 on verizon running 4.3
phone is rooted and super su, or superuser has been granted to the necessary apps,
still everything i've tried hasn't worked.
sorry for the length but i was attempting to provide as much info as possible...
any and all help regarding this matter will be greatly appreciated...
wesyde said:
my phone was rooted and i mistakenly upgraded to 4.3.
i didn't have any problems rerooting my phone.
however though the phone is rooted, from what i've read i'm going to assume my bootloader is locked.
so i've decided to seek answers from the professionals.
i have root checker, rom manager, goomanager, titanium back up, root broswer, rom installer, root explorer, android root tool,superuser, super su, quickboot, terminal emulator and the hackers keyboard.
all to no avail...everytime i try to install a custom rom a message pops up on the screen saying i have unauthorized software on my phone and that i need to take it to verizon. yes from recovery mode...as a matter of fact the recovery mode won't load it just takes me to the " take my phone to verizon screen "...
just to be clear i have a galaxy s3 on verizon running 4.3
phone is rooted and super su, or superuser has been granted to the necessary apps,
still everything i've tried hasn't worked.
sorry for the length but i was attempting to provide as much info as possible...
any and all help regarding this matter will be greatly appreciated...
Click to expand...
Click to collapse
Sounds like you're on 4.3, if that's the case then you can't install any custom roms without a special recovery.
Just to be sure, boot into download mode and type out what the text says in the top left corner. Your symptoms sound like it could be either, the install of will usually fail if you're rooted, unless everything you had was completely stock.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Sounds like you're on 4.3, if that's the case then you can't install any custom roms without a special recovery.
Just to be sure, boot into download mode and type out what the text says in the top left corner. Your symptoms sound like it could be either, the install of will usually fail if you're rooted, unless everything you had was completely stock.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
i'd like to thank you for taking the time to respond, however i must admit i'm even more confused..my phone is in download mode as i type this,yet i'm at a loss as to what it is i'm supposed to type, plus in download mode i don't have access to any keyboard.
IF ANYONE OUT THERE KNOWS WHERE I CAN FIND A LINK TO A PROPER VID I'D BE MOST GRATEFUL IF YOU'D SEND ME THAT LINK...I HAVE SPENT THE LAST 2 DAYS FOR OVER 10 HRS ATTEMPTING TO FIND THE INFO OR VID I MAY NEED TO BE SUCCESSFUL...
once again thank you for the help...
wesyde said:
i'd like to thank you for taking the time to respond, however i must admit i'm even more confused..my phone is in download mode as i type this,yet i'm at a loss as to what it is i'm supposed to type, plus in download mode i don't have access to any keyboard.
IF ANYONE OUT THERE KNOWS WHERE I CAN FIND A LINK TO A PROPER VID I'D BE MOST GRATEFUL IF YOU'D SEND ME THAT LINK...I HAVE SPENT THE LAST 2 DAYS FOR OVER 10 HRS ATTEMPTING TO FIND THE INFO OR VID I MAY NEED TO BE SUCCESSFUL...
once again thank you for the help...
Click to expand...
Click to collapse
You're on 4.3 with a locked bootloader, meaning you can't install custom recovery, rom, kernel. The only thing available for 4.3 is root. Don't try to install custom recovery or you will brick your phone. At this time you may have a soft brick, go here to fix it http://forum.xda-developers.com/showthread.php?t=2586319
wesyde said:
i'd like to thank you for taking the time to respond, however i must admit i'm even more confused..my phone is in download mode as i type this,yet i'm at a loss as to what it is i'm supposed to type, plus in download mode i don't have access to any keyboard.
IF ANYONE OUT THERE KNOWS WHERE I CAN FIND A LINK TO A PROPER VID I'D BE MOST GRATEFUL IF YOU'D SEND ME THAT LINK...I HAVE SPENT THE LAST 2 DAYS FOR OVER 10 HRS ATTEMPTING TO FIND THE INFO OR VID I MAY NEED TO BE SUCCESSFUL...
once again thank you for the help...
Click to expand...
Click to collapse
Physically type down in a reply to @BadUsername, exactly what is written when you are fully booted into download mode. Everything in the upper left of the screen where it starts with "Odin Mode" in red all caps. Someone is helping you and they can't continue to help you, unless you help them first with that info.
BadUsername said:
You're on mf1 still.
Flash this in Odin:
http://www.androidfilehost.com/?fid=23134718111254196
Using this guide, section 5:
http://forum.xda-developers.com/showthread.php?t=1762709
Then use this to root your phone again:
http://forum.xda-developers.com/showthread.php?t=2332825
After this, I'd unlock the bootloader with ez-unlock version 1.2 to make sure it's unlocked.
When you reboot, find sdm1.0.apk and fwupdater.apk and rename them to sdm1.0.apk.bak and fwupdater.apk.bak. Or use titanium backup and freeze both of them. Then you don't have to worry about an update being pushed to your phone.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Would those be appropriate to block if on rooted 4.1 currently and wanting to block the 4.3 update? Anything else to block/freeze?
andydumi said:
Would those be appropriate to block if on rooted 4.1 currently and wanting to block the 4.3 update? Anything else to block/freeze?
Click to expand...
Click to collapse
Here is my list:
If the OTA already downloaded, delete it here /cache/fota
To disable the OTA:
Rename or freeze the apps with Titanium backup:
otacerts.zip located in /etc/security - rename to otacerts.zip.bak
Rename fwupdate.odex, fwupdate.apk located in /system/app
and freeze SDM1.0 located in /system/app
Awesome thank you. And without TiBu? My wife uses the GS3, and I don't think she has a license for TiBu.
I guess just rename the first two with a file manager, delete the update and disable sdm1 in the app settings?
andydumi said:
Awesome thank you. And without TiBu? My wife uses the GS3, and I don't think she has a license for TiBu.
I guess just rename the first two with a file manager, delete the update and disable sdm1 in the app settings?
Click to expand...
Click to collapse
That would also work.
Sent from my SCH-I535 using Tapatalk 2