I just received my Note 10.1 and am loving it. The only question I have is the handwriting and shape recognition. I have opened S Note and for some reason I cannot see it anywhere. Can anybody help?
In the S Note app in the upper left hand corner inbetween the pen icon and the Text Icon is a another box. Press and hold down o that icon with finger or pen for a few seconds and a productivity toolbar will appear and you can choose between Formula, Shapes and Handwriting recognition. Hope this helps.
Any of you guys noticed that when the pen thickness is very tiny and I draw a circle, it fills it? Everytime I draw a circle, it fills it black but when I make the pen thicker, it works fine.
cheznutts said:
Any of you guys noticed that when the pen thickness is very tiny and I draw a circle, it fills it? Everytime I draw a circle, it fills it black but when I make the pen thicker, it works fine.
Click to expand...
Click to collapse
Yeah that's quite weird. If you move it to the next lowest thickness it doesn't do it. And it doesn't do it for other shapes.
Sent from my GT-N8013 using Tapatalk 2
Time for an update.
Is anyone able to enter a simple sentence without it popping into text half way through. I can't stand the fact I can't delay 'recognition' until I enter punctuation. Is there anyway to modify this behavior?
-Apologies for hijacking.
Smalls_ said:
Is anyone able to enter a simple sentence without it popping into text half way through. I can't stand the fact I can't delay 'recognition' until I enter punctuation. Is there anyway to modify this behavior?
-Apologies for hijacking.
Click to expand...
Click to collapse
That was going to be the question I was going to ask too.
Related
Ive been pulling my hair out over this for about 6 hours.
I cannot get my CHT softkey bar to line up properly with the screen. I attached a couple of screens shots to show my problem EVERYTIME. The only time it went all the way down is when i stretched my image the whole 512x128.
What im trying to do is get the bottom edge of the graphic to line up perfectly with the bottom of the screen.
If anyone could show or explain to me how to accomplish this it would be greatly appreiciated.
ericv99 said:
Ive been pulling my hair out over this for about 6 hours.
I cannot get my CHT softkey bar to line up properly with the screen. I attached a couple of screens shots to show my problem EVERYTIME. The only time it went all the way down is when i stretched my image the whole 512x128.
What im trying to do is get the bottom edge of the graphic to line up perfectly with the bottom of the screen.
If anyone could show or explain to me how to accomplish this it would be greatly appreiciated.
Click to expand...
Click to collapse
Ok I have made quite a few Softbars now, so I might be able to help you
I uploaded i little pic with a previous work of mine.
There are 2 lines in it. The upper line (completely red) shows you what is the limit of what is displayed on the screen. Everything above this line will be displayed.
The space between the 2 lines is more or less not necessary
and everything you see below the lower line will be stretched to be the menu panel when the cht softbar slides up
It is however the case, that the part between two lines will fill the lower like 5 pixels of the screen so you want to adapt that to the rest of your softbar, so that it fits
But normally if the upper design reaches down to the upper line there shouldnt be any problem
Nordpolcamper said:
Ok I have made quite a few Softbars now, so I might be able to help you
I uploaded i little pic with a previous work of mine.
There are 2 lines in it. The upper line (completely red) shows you what is the limit of what is displayed on the screen. Everything above this line will be displayed.
The space between the 2 lines is more or less not necessary
and everything you see below the lower line will be stretched to be the menu panel when the cht softbar slides up
It is however the case, that the part between two lines will fill the lower like 5 pixels of the screen so you want to adapt that to the rest of your softbar, so that it fits
But normally if the upper design reaches down to the upper line there shouldnt be any problem
Click to expand...
Click to collapse
again.. you come to save the day.. haha..
thank you for that..im gonna have a another go at it. lets see what comes up...
im still getting that gap.
check out my file and tell me what im doing wrong..
ericv99 said:
im still getting that gap.
check out my file and tell me what im doing wrong..
Click to expand...
Click to collapse
I adjusted some little things in the psd try it this way there shouldnt be anything wrong now If you leave the space between the two line black it will normaly produce the gab you were talkin about
it still happens... it like just cuts it off too short..
ericv99 said:
it still happens... it like just cuts it off too short..
Click to expand...
Click to collapse
Yes I thought that this might happen. That means, that you have to shrink the upper part a little and move it upwards.
Nordpolcamper said:
Yes I thought that this might happen. That means, that you have to shrink the upper part a little and move it upwards.
Click to expand...
Click to collapse
Yes, as said above and in some instances, I have found it easiest, just to adjust the softkey height just slightly in CHTeditor.
Sometimes that seems to be another simple enough workaround.
When I touch a text-field, the onscreen keyboard pops up, which is all fine and dandy, but the text-field doesn't move up and away so I can see what I'm typing. This problem is universal to all apps, so I know it's a system problem. Any ideas?
Either move the on-screen keyboard for input boxes near the bottom, or pin/dock it (which will re-size the app window and should bring the field into view or at least let you scroll to it)
GoodDayToDie said:
Either move the on-screen keyboard for input boxes near the bottom, or pin/dock it (which will re-size the app window and should bring the field into view or at least let you scroll to it)
Click to expand...
Click to collapse
Is there an easy way to mod the on screen keyboard on desktop mode so that it can be made smaller? The size it scales to when in portrait mode is more than big enough, pity it wouldn't stay that small on landscape, thanks.
Boomchaos said:
When I touch a text-field, the onscreen keyboard pops up, which is all fine and dandy, but the text-field doesn't move up and away so I can see what I'm typing. This problem is universal to all apps, so I know it's a system problem. Any ideas?
Click to expand...
Click to collapse
This is for the desktop and not Metro? If so that's by design - unless you pin the keyboard it floats, and you move it out of the way...
schettj said:
This is for the desktop and not Metro? If so that's by design - unless you pin the keyboard it floats, and you move it out of the way...
Click to expand...
Click to collapse
It was for Metro. Somehow it fixed itself after a couple of hours...
So my Asus has an option where you can lock the bottom bar so you don't accidentally open the setting menu or press back during games/movies.
I want something similar for my Note10 as when using S-note my palm sometimes sits on the bar and opens the menu which is very annoying! This isn't a palm detection issue within the S-note app it's just a general Android tablet issue.
Anyone got any ideas?
Acctually, when your s-pen is hovering on your screen, your screen is automatically locked from your hand touch
correct me if I'm wrong
Dam you're right. I guess the issue happens when I lift the pen too high and still lean on it. Might need to adjust my writing style.
courtn00b said:
Dam you're right. I guess the issue happens when I lift the pen too high and still lean on it. Might need to adjust my writing style.
Click to expand...
Click to collapse
You can use air view pointer as indicator is your pen too high or not..
correct me if I'm wrong
How do I move multitasking bar to right, left on the screen. Currently placed at the bottom is very annoying as it pops out everytime I use S pen and my palm touches it. I hv checked the palm restrict button but it only works in s note area not in menu bar at bottom.
Pl help. GT N8000, 4.1.2
fanta182 said:
How do I move multitasking bar to right, left on the screen. Currently placed at the bottom is very annoying as it pops out everytime I use S pen and my palm touches it. I hv checked the palm restrict button but it only works in s note area not in menu bar at bottom.
Pl help. GT N8000, 4.1.2
Click to expand...
Click to collapse
You need to enable palm rejection in system setting, not s-note settings
se1988 said:
You need to enable palm rejection in system setting, not s-note settings
Click to expand...
Click to collapse
Thanks. But I can't find option to set palm rejection in sys settings. Pl pardon my ignorance but could u give me the menu steps.
fanta182 said:
Thanks. But I can't find option to set palm rejection in sys settings. Pl pardon my ignorance but could u give me the menu steps.
Click to expand...
Click to collapse
Sorry, palm rejection seems to be on by default. are you rooted?
se1988 said:
Sorry, palm rejection seems to be on by default. are
No not rooted.
Click to expand...
Click to collapse
Agree
fanta182 said:
How do I move multitasking bar to right, left on the screen. Currently placed at the bottom is very annoying as it pops out everytime I use S pen and my palm touches it. I hv checked the palm restrict button but it only works in s note area not in menu bar at bottom.
Pl help. GT N8000, 4.1.2
Click to expand...
Click to collapse
I totally agree, mutlitasking bar and even more the Quikpanel popping out very very often are very very annoying.
Multitasking bar keeps coming even with no apps in it, what's the point of this bar anyway as you get a button that brings you all the openned apps at the bottom left of the screen.
But what bothers me most is the Quick Panel, drives me crazy !
Sure, there's palm rejection, but when thinking of what to write next, I don't think of keeping the pen close enough to the screen and bam the quikpanel pops up, hate it.
I love this tablet, it's fantastic, handwriting to text is amazing,
but why on earth did they put the quick panel on the bottom right right where 90% users put their writing hand,
Menues have allways been on the left in Windows, MacOs, in all softwares, why change ??!!
Can't it be deactivated ?
Lefties are lucky.
Philippe0742 said:
I totally agree, mutlitasking bar and even more the Quikpanel popping out very very often are very very annoying.
Multitasking bar keeps coming even with no apps in it, what's the point of this bar anyway as you get a button that brings you all the openned apps at the bottom left of the screen.
But what bothers me most is the Quick Panel, drives me crazy !
Sure, there's palm rejection, but when thinking of what to write next, I don't think of keeping the pen close enough to the screen and bam the quikpanel pops up, hate it.
I love this tablet, it's fantastic, handwriting to text is amazing,
but why on earth did they put the quick panel on the bottom right right where 90% users put their writing hand,
Menues have allways been on the left in Windows, MacOs, in all softwares, why change ??!!
Can't it be deactivated ?
Lefties are lucky.
Click to expand...
Click to collapse
Thanks buddy, at least some one shares the same concern, I am surprised that no responses from the expert developers so far on this forum. I wish they can reach this to the Samsung guys......and before that help to come up with a work around.
Use GMD s-pen control. You can enable palm rejection from there.
Sent from my GT-N8013 using xda premium
Hello,
I've recently bought a Lenovo P11 tablet to take notes. When drawing with a pen, however, I have this problem (and I have verified it by enabling touch detector in developer options): when I lay the pen/finger on the screen, there is an area (I would say 2-3 cm) where the cursor doesn't move even if I move the pen. When I exit that area, a line gets drawn between where I started and where I arrived, but this is wrong as I may have drawn curves in the middle of the two.
This leads to two things:
* When I want to draw something rounded (like a "2"), the upper part gets drawn as a line unless I draw it very big.
* When I want to draw something small, only a dot gets drawn because I didn't leave the "area" and therefore didn't trigger the cursor.
Now I am pretty sure this is a software problem, as if it were a problem with the screen this wouldn't happen only at the start of the line.
Also, I'm sure this is not because of the application I'm using (OneNote), as I've tested with the developer options to show the cursor and in any place in the OS, when I start drawing, the cursor is stuck at where I've begun.
Anyone can help?
Thanks.
Nexgan said:
Hello,
I've recently bought a Lenovo P11 tablet to take notes. When drawing with a pen, however, I have this problem (and I have verified it by enabling touch detector in developer options): when I lay the pen/finger on the screen, there is an area (I would say 2-3 cm) where the cursor doesn't move even if I move the pen. When I exit that area, a line gets drawn between where I started and where I arrived, but this is wrong as I may have drawn curves in the middle of the two.
This leads to two things:
* When I want to draw something rounded (like a "2"), the upper part gets drawn as a line unless I draw it very big.
* When I want to draw something small, only a dot gets drawn because I didn't leave the "area" and therefore didn't trigger the cursor.
Now I am pretty sure this is a software problem, as if it were a problem with the screen this wouldn't happen only at the start of the line.
Also, I'm sure this is not because of the application I'm using (OneNote), as I've tested with the developer options to show the cursor and in any place in the OS, when I start drawing, the cursor is stuck at where I've begun.
Anyone can help?
Thanks.
Click to expand...
Click to collapse
was it a solution?