Database Info

[Q] New android user

I recently rooted my Inspire. Today there was a WIFI update available and when I went to run the update the screen blacked out with an exlclamation mark. Is this because of the root that the phone will not take the update? Or is that the update process?
Thanks

Is the update from your service provider or from the people that created the ROM? If it's from your provider I would not even try to run the update just wait for an updated version of your rom to come out.

Thanks!
Kind of what I was thinking but being new to the device I thought I would ask.
Thanks again!

This is just to enable better speeds but all the ROMs already enable that.
Sent from my HTC Desire HD using XDA Premium App

Actually, its likely the side loading update, which most Roms also have. The speed update was weeks ago...
Sent from my Inspire 4G using XDA Premium App

Silas0220 said:
Actually, its likely the side loading update, which most Roms also have. The speed update was weeks ago...
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
The sideloading one is silent. You wont see a notification
Sent from my HTC Desire HD using XDA Premium App

AcesUnder said:
I recently rooted my Inspire. Today there was a WIFI update available and when I went to run the update the screen blacked out with an exlclamation mark. Is this because of the root that the phone will not take the update? Or is that the update process?
Thanks
Click to expand...
Click to collapse
The OTA update is a combination of a patch pack and some new firmware for the radio and hboot. The first phase is applying the patch pack. For this to work, you need a pretty much stock ROM. If you're rooted, you likely have a few files that will be different and the patch will fail. It also checks the CID and aborts if you're not using stock (ie you used gfree to "open" your SIM, etc.). The firmware will only install after the patching process has completed successfully.
If you are rooted, then your best bet is to just use ATTN1's package that contains all the patched files and firmwares. You can find it here:
http://forum.xda-developers.com/showthread.php?t=1058042

[Q] MIUI 1.1.11 working zip?

I've been using the older version for a while now but cannot update since official thread is locked and the link on there has not been working for me for some reason. Comes out as. Zip.zip format. And I keep getting an error messenger when I try to flash it. Something I found out has to do with it just being a bad zip. Anyone have a clean one that works?
Sent from my SGH-I997 using XDA App

MIUI 1.11.11 update fix
Go here for fixed update:
http://www.multiupload.com/M9UFH12L4Z
Ignore the date on the file. It IS the 1.11.11 update.

Who"fixed" it?
Sent from my SAMSUNG-SGH-I997 using xda premium

I did. I just switched out the busybox file.
That has seemed to be a problem with the last couple updates.

How did u manage to update it?
Sent from my SGH-I997 using xda premium

so I followed all the steps and it's still not working for me. coming from illuminance rom (latest version)
but I really wanna try it.

Worked for me....when it doesn't boot the first time...3 button back to recovery...it should be blue...reflash without wiping and reboot...should be good to go...I came from illuminance also
Sent from my GT-I9000 using xda premium

getting build prop error when trying to flash this happends with the older builds too for some reason this si something that just started since i rerooted my phone

CheesyNutz said:
getting build prop error when trying to flash this happends with the older builds too for some reason this si something that just started since i rerooted my phone
Click to expand...
Click to collapse
had the same problem coming from obsession i oden back to stock and then it worked

dman3285 said:
How did u manage to update it?
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
It is a fix of the update. The update was not installing.
It is not an update, so to speak.

anyone have a link to the 1.11.04 build... i use a custom email apk from here http://miui-germany.de/forum2/index.php?page=Thread&threadID=2325 but he switched phones and hasnt made one for the 1.11.11 build.. unless anyone knows how or where to get one.

cablegooru said:
anyone have a link to the 1.11.04 build... i use a custom email apk from here http://miui-germany.de/forum2/index.php?page=Thread&threadID=2325 but he switched phones and hasnt made one for the 1.11.11 build.. unless anyone knows how or where to get one.
Click to expand...
Click to collapse
The lastest one for the Infuse is 1.11.11. The guy who was porting the new updates for the Infuse every week is not doing it anymore, so no updates for the Infuse beyond 1.11.11.
You can find 1.11.11 here:
http://forum.xda-developers.com/show...postcount=1562
Ignore incorrectly typed version on the zip file.

Now that 1.11.18 is out I am happy camper. Thanks everyone
Sent from my SGH-I997 using XDA App

I did voodoolagfix recovery of cwm with sgs kernel flasher. So then flash using the red recovery. Works every time for me
Sent from my SGH-I997 using XDA App

g2x new baseband mar2012 flash miui phone call problem

make phone call have sound problem!
anyone know what problem, i tried cm and miui have same problem

Do a little searching would ya.
Sent from my LG-P999 using Tapatalk 2

There's a Q&A section for this type of thread
Sent from my Hellfire Kindle using Tapatalk 2

me too
i flash v21j.kdz
and restore cm7 by recovery
and issue in call
my god

i go there, didn't find out anything with this problem.

This is a known issue.
Problem is with the baseband. It affects all known ROMs. If you want to make phone calls, you'll have to revert back to the older baseband, or go with stock 2.3.4 that was pushed.

nobody can fix that? may be just need cm or miui find out fix.

Where's the mod for this forum?

buru898 said:
Where's the mod for this forum?
Click to expand...
Click to collapse
Lol right!?
Sent from my LG-P999 using Tapatalk 2

Flash v21e baseband. Problem solved game over
Sent from my Galaxy Nexus using xda premium

The fact that two threads have been made here that shouldn't be here and the thread that was titled "Farewell" lasted this long (I messaged the mod and asked them to lock the "farewell" thread cause of that guy) makes believe even more than ever, not only has T-Mobile given up on this phone but so did our mods LOL.
Sent from my LG-P999 using xda premium

To those with the new baseband and with custom ROMs, have you tried to update your RIL using getRIL? https://play.google.com/store/apps/details?id=com.sibbor.getril&feature=nav_result#?t=W251bGwsMSwyLDNd

Mods here don't give a ****.
Sent from my LG-P999 using Tapatalk 2

Alakratt said:
To those with the new baseband and with custom ROMs, have you tried to update your RIL using getRIL? https://play.google.com/store/apps/...getril&feature=nav_result#?t=W251bGwsMSwyLDNd
Click to expand...
Click to collapse
Even with matching RIL/Baseband it still does the same thing on a custom ROM...verified that yesterday when I manually pushed the RIL to my phone...after submitting the RIL to Rob so he can update his app...
Sent from my LG-P999 using Tapatalk 2

i did, but getril nothing ril match new baseband

gb to ics

there is an update on server STAGING, master-sdc100.blurdev.com.......GB to ICS ..software update 67.21.125.en.us (298.6 MB) i've downloaded it a few time took like 45-60 mins, wipe data before downloading, n when i hit install, everything is ok for bout 1/4 of the installation ,till package icon changes to a triangle with exclamation inside phone reboots an msg window pops up update failed, i hav no roms installed, i'm on full stock rooted motorola atrix 2 at&t edidson 55.13.25.MB865.att.en.us....... can anyone help!!!!!!!

motowizz said:
there is an update on server STAGING, master-sdc100.blurdev.com.......GB to ICS ..software update 67.21.125.en.us (298.6 MB) i've downloaded it a few time took like 45-60 mins, wipe data before downloading, n when i hit install, everything is ok for bout 1/4 of the installation ,till package icon changes to a triangle with exclamation inside phone reboots an msg window pops up update failed, i hav no roms installed, i'm on full stock rooted motorola atrix 2 at&t edidson 55.13.25.MB865.att.en.us....... can anyone help!!!!!!!
Click to expand...
Click to collapse
Keep the downloaded OTA on your /sdcard, but DO NOT INSTALL it! There is some dev work being done on the newest "leak", and I can tell you, things have changed. Avoid complications, and just sit back and hold tight to the OTA you found until we (erm... the devs) have tested this, and can get us back to stock.
Trust me...

will do
Apex_Strider said:
Keep the downloaded OTA on your /sdcard, but DO NOT INSTALL it! There is some dev work being done on the newest "leak", and I can tell you, things have changed. Avoid complications, and just sit back and hold tight to the OTA you found until we (erm... the devs) have tested this, and can get us back to stock.
Trust me...
Click to expand...
Click to collapse
where do i find the update after i download it?

qa
motowizz said:
where do i find the update after i download it?
Click to expand...
Click to collapse
QA.... Master-Qa1.blurdev.com...... also has the update........

motowizz said:
where do i find the update after i download it?
Click to expand...
Click to collapse
Should be in your cache if you have root access.
Sent from my SAMSUNG-SGH-I727 using xda premium

If your rooted it wont install.
Sent from my DROID RAZR using xda app-developers app

So wat move d file bck in the root cache, unroot an then in install it will work?
Sent from my MB865 using xda app-developers app

motowizz said:
So wat move d file bck in the root cache, unroot an then in install it will work?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Don't install this leak!!! I am warning you, you can not fxz at all after this one. just go install the first leak that is posted in the general section, we have a way to fxz with that one still.

Anything new bout the new ics leak?
Sent from my MB865 using xda app-developers app

motowizz said:
Anything new bout the new ics leak?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yes. The new leak is very much final ICS for us. And, as jim mentioned, it will lock us down even more with no way to return to GB. Unless that doesn't matter to you for some reason, I would stick with the first ICS leak found and posted in the general section. Then you may flash a ROM made from the new leak if you wish to experience what the newest leak has to offer. Or, you can decide for yourself what's best for you..
asiandrg0n said:
If your rooted it wont install.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
That statement is not entirely true. You can install it being rooted. But, if you have ever had bootstrap/BootMenu installed.. or have removed any files that get patch checks, then it won't install.

Well where is the first leak? I'm lookin not finding, the one i found they said i had to rsd flash to searet or mearet but rsd would not flash with the files the site gave me, my bootloader says failed n evertime i rebooted is goes to bootloader, but i'm not a novice n fix that prob, so if anyone has a att edison ATRIX 2 n installed the first leak give a how to please, do i have to flash bck to 2.3.5 cause i did dat got the ota to 2.3.6 tried the update n still nothing, i just wanna get of GB it's cool but everyone is upgrading n I'm stuck waitin for moto dev to stop scratching their ass n give us what we want :banghead:
Sent from my MB865 using xda app-developers app

I installed the old blur ics leak on my at&t atrix 2 it runs real smooth so far n when go to system update their is an update, 67.125.us.en 43mb should i install that or leave that alone? Answers anyone?
Sent from my MB865 using xda app-developers app

Can we get a screen shot? My initial response is no, don't do it.
Firmware info for it would be great.
Screenshots in ICS are down on volume rocker and power button at the same time.
Sent from my SAMSUNG-SGH-I727 using xda premium

motowizz said:
I installed the old blur ics leak on my at&t atrix 2 it runs real smooth so far n when go to system update their is an update, 67.125.us.en 43mb should i install that or leave that alone? Answers anyone?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
There is already a thread on this update. It is not recommended you pull down the update, but is your decision.
http://forum.xda-developers.com/showthread.php?t=1879998

There it is
Sent from my MB865 using xda app-developers app

motowizz said:
There it is
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
I would hold off for now. But that's your decision.

The devs and other senior members are recommending against this update as you cannot go back to GB from it.
Read this thread: http://forum.xda-developers.com/showthread.php?t=1882335
Sent from my SAMSUNG-SGH-I727 using xda premium

[Q] New stock OTA update. Anyone know what it is?

This morning I woke up to my phone telling me that there was an update to install. I have installed cwm and rooted my phone but am still on the stock rom (less buggy than others) so the update wont work. Does anybody know what this update is, Could it be the JB update? I was just curious if it was worth taking my phone back to stock to do the update?
Thanks

Its a new baseband/radio update and it updates the AT&T apn settings. Nothing major. Its been covered a few times in general and q&a areas.
Sent from my SAMSUNG-SGH-I727 using xda premium

Vfan23 said:
Its a new baseband/radio update and it updates the AT&T apn settings. Nothing major. Its been covered a few times in general and q&a areas.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I was unaware that there were any APN changes. Just the new radio (that worked well for a bit for me, then completely freaked out yesterday).

liquidzoo said:
I was unaware that there were any APN changes. Just the new radio (that worked well for a bit for me, then completely freaked out yesterday).
Click to expand...
Click to collapse
Is it possible to run these at&t updates using CWM? Or will i have to download them elsewhere and install them manually?

Someone on here has a CWM flash able i3 radio but you'll have to find it
Sent from my SAMSUNG-SGH-I727 using xda premium

jacobsober said:
Is it possible to run these at&t updates using CWM? Or will i have to download them elsewhere and install them manually?
Click to expand...
Click to collapse
There's a thread in General that has a CWM flashable zip.

cdsheperd extracted it here http://forum.xda-developers.com/showpost.php?p=33344009&postcount=22
I uploaded it here so we don't have to use all his bandwith http://www.mediafire.com/?oj6kj6ad4e4gx9g
I've been running it for the past few days and it's worked much better for me then UCLF6

liquidzoo said:
I was unaware that there were any APN changes. Just the new radio (that worked well for a bit for me, then completely freaked out yesterday).
Click to expand...
Click to collapse
The only change to the APN, for me anyway, was it went from being named att pta to att phone. Everything else was the same.
Sent from my SGH-I727 using xda app-developers app

For some reason mine won't connect to LTE, didn't have that before. I'm switching back to UCLF6, if I can.
Sent from my SAMSUNG-SGH-I727 using xda premium

Mohan made a flashable zip of the update available in the dev section.
Sent from my SGH-I727 using Tapatalk 2