Database Info

Please assist with micro sd card with bad blocks

Hey everyone,
I have a 1gb micro sd card. It apparently has bad blocks and cannot be recognized by my 8525 (WM6.1), vista pc or xp sp2 pc. I have the programs to recover the info on it, but none of these programs are effective because the card doesn't show up as a drive.
I am attempting to access the card directly from the phone. With the pc's I have an usb adapter that I know works because I use it for my 8gb micro sd card to swap information.
Can some one give me an answer on how to either fix the bad blocks or make the card recognizable by the ppc or pc's? The recovery programs I have say they will get info off a formated card, but I can't format what the phone or pc's doesn't recognize.
Thanks.

which apps did you try?
if if i'm not mistaken i managed to recover a card using Active Recovery 7

The easiest way for me was, plug your card back to where it gave you a bad blocks, and it should be readable, then backup your datas there,.
this is what i did to my 2GB miniSD for Olympus e520 SLR Camera (the camera lost now),.
I plug it in to my friend laptop, then it cant be readable by any device, then i plug it again, and its readable, then i back it up, then i leave the miniSD,.

Hey G, Thanks for the reply. The card went bad in a digital camera. So I should place the microsd card in the camera, use the usb cord to connect to the pc, remove the usb cord once the card doesn't read, then reconnect the usb cord?

nir36 said:
which apps did you try?
if if i'm not mistaken i managed to recover a card using Active Recovery 7
Click to expand...
Click to collapse
I'll check out Active Recovery 7. Thanks.

[Q] external drive

there is a usb hookup.. so the question is raised, in my mind, can you hook up an external hard drive and thus rendering the 13gb a non issue (at least in the area of video/audio files).
anyone had experience with this?

I've been able to use my flash usb thumb drives without any problems, however when I plugged my WD 1Tb storage drive into the GTab, used ES File explorer to open usbdisk folder but did not see any files listed.

If you want to use a external usb hard drive for movies/files it has to be formated fat32 and it will work.

I have connected with 16gb, 32gb, 64gb and a 500gb Western Digital HD (usb powered). All work fine, but best to NOT remove the USB until the G is placed in sleep mode. There appears to be an unmounting issue that also blows up the app index. Apps can vanish and then not appear again until rebooting.
Archos 101 seems to have a similar issue, so maybe Froyo related.

rushless said:
I have connected with 16gb, 32gb, 64gb and a 500gb Western Digital HD (usb powered). All work fine, but best to NOT remove the USB until the G is placed in sleep mode. There appears to be an unmounting issue that also blows up the app index. Apps can vanish and then not appear again until rebooting.
Archos 101 seems to have a similar issue, so maybe Froyo related.
Click to expand...
Click to collapse
Yeah, I try to put mine to sleep before I pull out my thumb drive as well, but sometimes I forget and as soon as I yank it, the tablet reboots. Ugh!

I bought a 500gb Seagate the same night I got my tablet (been needing a portable hd for a while). It wouldn't work on either the tablet or my PS3. Definitely a format thing. As mentioned earlier, it needs to be formatted Fat32.
Just an FYI, formatting a big hd to Fat32 isn't the easiest thing in the world to do. Windows 7 won't do Fat32 and 95 has a size limit (32 gb maybe?). HP has a program you get download from their site. It works on any make, not just their's. If anyone needs it, I still have it on my PC at home.

J_Bone said:
I bought a 500gb Seagate the same night I got my tablet (been needing a portable hd for a while). It wouldn't work on either the tablet or my PS3. Definitely a format thing. As mentioned earlier, it needs to be formatted Fat32.
Just an FYI, formatting a big hd to Fat32 isn't the easiest thing in the world to do. Windows 7 won't do Fat32 and 95 has a size limit (32 gb maybe?). HP has a program you get download from their site. It works on any make, not just their's. If anyone needs it, I still have it on my PC at home.
Click to expand...
Click to collapse
What is the app called? Work with Vista? I tried formatting a 1gb HD to Fat32 via DOS commands, but failed.
As far as USB, main issue for removing while G is asleep (besides random reboots) is that removing while awake seems to be a main reason apps vanish until a reboot.

If I need to format a big, big hard drive to FAT32, I'll boot up a Linux LiveCD (usually Ubuntu or Knoppix) and use gParted to do it.

rushless said:
What is the app called? Work with Vista? I tried formatting a 1gb HD to Fat32 via DOS commands, but failed.
Click to expand...
Click to collapse
This is a different site but I think it is the same program. One of the comments said it didn't work on Vista business but YMMV. Worth a try.
http://hp-usb-disk-storage-format-tool.software.informer.com/
I went and checked my reformatted portable drive a few minutes ago and the tablet doesn't recognize it. It actually says there are no files in that directory. The drive is working on my pc and PS3. I put a small 4 gb stick in the tablet and it read it fine.
Any ideas?

It recognized my Ipod 120GB classic in disk mode. It also appears to be hot swappedable.

papote18 said:
It recognized my Ipod 120GB classic in disk mode. It also appears to be hot swappedable.
Click to expand...
Click to collapse
It is hardware wise. Software wise, depending on ROM, it can crash your tablet. I try to put it to sleep before pulling my flash drive out. If not, sometimes it will go black and I'll see the boot animation.

I went to the link above looking for the Fat32 > 32 gig tool and it was not available.
If you need this tool, Google for "HP SP27608" and there are a few places where you can download it. HP didn't even have it on their FTP server -- don't know why they have quit offering it?!
Rev

Hi,
Sorry for the late post, but I just got around to trying a bunch of my USB flash drives, and Gtab doesn't see any of them ...
The LED on the drives flashes for a second, then goes off.
Do I have to mount it or something?
Jim

same problem here too. Is there a way to mount a USB drive without formatting? I do not want to loose my collection.

I've never had an issue with my Flash drives (VEGAn or TnT Lite). Are the drives formatted to FAT32?

I have had an issue with a 32GB USB flash drive not showing up on the gtab. I plugged it into my win7. Machine, moved files off, formatted fat, put files back on and it worked fine in the tab.
Another note, using vegan, I never sleep the device to get the drive out. Just wait a second and Yank it. Never been an issue for me.

I have noticed that my flash drives don't mount 100% of the time and sometimes require dis/reconnecting. Also I have a 1tb wd my passport. I formatted the whole drive fat32 and the gtab wouldn't see it. I then formatted just a partition of 120gb in fat32.....still no dice. I then reduced the partition to 32gb nd the gtab sees/reads/writes no problem.
I'm wondering how that other Guy got his 500gb to mount....

I'd like to know how folks have been able to get their external hard drives recognized as well. I have tried stock and tnt lite roms. Also tried several different hard disks all formated fat32. Even repartioned disks to 8GB and still no joy. Flash drives I own all work OK. Just can't use hard disk as yet. Even tried new rom image that came out today, no luck. Am I missing or not doing something?

The usb port does not supply enough power for external hard drives. I tried several and they did not show up in dmesg. When I used one with external power, the drive was seen and the partitions, but was not mounted.

The usb port does not supply enough power for external hard drives. I tried several and they did not show up in dmesg. When I used one with external power, the drive was seen and the partitions, but was not mounted.
Click to expand...
Click to collapse
Thanks, but 2 out of 3 drives I tried use ext power. still no work.
Can anyone who has this working please post what drive they are using?

Micro SD help

I have my internal 16 gb all filled up about 95% and I bought a micro sd card which arrived today.
I began transferring media to the micro sd card under /removable/microsd/ and was able to transfer about 1gb so far of the possible 16gb.
i noticed when i would start a file transfer, i would get a pop up message saying the file "may be copied to the device for storage or transport use only. it is not supported for use on the device itself. if possible, use a media program that can convert the file before copying it. if you copy the file now, it will be stored on the device, but may not be presented in the device user interface."
however, i would get an error after saying theres not enough free space on the device when i began transferring my media.
wtf is going on and how do i transfer my media to the micro sd?

plug it into your PC and copy it to your PC then to microSD

yes, my tablet is hooked up to my pc. that is wherein lies the error messages i'm getting.

so it looks like when i cleared my micro sd and my internals and tried again it worked.
1) first i loaded my media onto the micro sd first
2) then i was able to transfer media to my internal storage
i find this strange because i was having errors loading to the micro sd card after my internal storage was filled up.

Where did you bought the microSDHC card? Did you tested it to full capacity and see if it's genuine?

hotshotz said:
so it looks like when i cleared my micro sd and my internals and tried again it worked.
1) first i loaded my media onto the micro sd first
2) then i was able to transfer media to my internal storage
i find this strange because i was having errors loading to the micro sd card after my internal storage was filled up.
Click to expand...
Click to collapse
I also get a message when trying to copy files to the microSDHC card (inserted in the TF) from the PC, but I just click to continue and they copy just fine.

yeah its real. transcend 16gb micro sdhc class 6 straight from amazon.
before i just bypass the message notification (hence loading about 2gb of media onto my micro sd).
when i tried to transfer more, i would get an error saying my storage was full. seems to be fluky.

Copy from one USB-device to another with Asus Infinity

Hello,
New to Android and new to this forum. I have my TF700T two weeks now and I'm glad I bought it. My target is to copy the content of my Compact Flash cards (16GB each - from my DSLR) to a portable hard drive. Therefore I tried to connect both a card reader and a portable hard drive via an auto-powered USB-hub to the only usb-connection of my tablet. I even tried with another hub and even with a third hub. The only result was that my tablet only found the first device that was connected (regardless wich one: the CF-card or the HD) with the hub and not both at the same time, so copying from the CF-card to the drive isn't possible in one step. Sure I can copy the CF-card to the internal memory of the tablet and in a second pass move it to the HD, but that is very time-consuming.
Anyone who knows how to connect more then one usb-device at the same time via a powered USB-hub and do a file transfer between them? Your help is greatly appriciated.

You can use wi fi transfer to do it with a file manager, like file expert.

tbtaf said:
You can use wi fi transfer to do it with a file manager, like file expert.
Click to expand...
Click to collapse
@tbtaf: When on vacation or on a photo trip I only have that portable hd, my tablet and a powered usb hub. I think a Wifi appraoch is not applicable then. Or am I missing something?

Sounds like you need to setup a second mount point for the additional device - don't know if that can actually be done or not, but I do know that some people who could not even connect the first device were able to manually specify the device by mounting it in a terminal window.
I'm not sure 100% on the code, but let me try to find out.

Or you could copy the 16 Gb CF card onto the pad's internal memory (or external MicroSD card), disconnect it, connect the HD and then copy it out again.

HeartWare42 said:
Or you could copy the 16 Gb CF card onto the pad's internal memory (or external MicroSD card), disconnect it, connect the HD and then copy it out again.
Click to expand...
Click to collapse
He already mentioned, he doesn't want to do this, he wants to copy straight.
For now, it's not possible since the powered hub or non power hub unable to recognize 2 devices at the same time.

CF, now there's nostalgia if anything. I thought those became outdated over 3 years ago... Fact is the CF is hardly compatible with mobile devices these days.
No, you can't copy from an external cardreader directly onto an external HDD through your tablet. It can only read 1 storage device in the USB port. Multiple devices works, but multiple storages doesn't. Some people have had some success with USB Flashdrives/Pendrives instead of HDD's though. You could try that.
You can copy from an SD to HDD easily though, so you could consider using an SD with a CF adapter if your camera has no SD slot. (SD's have the added advantage that the pins can't bent.)

[Q] Help!! Connecting External Hard Drives

I have two Hard drives, one is a 320Gb (Portable Seagate momentus) which I successfully formatted to exFAT and can access & copy files back and forth through my OTG cable to the S5. It mounts perfectly as USBDRIVEA without the need for paragon NTFS+exFAT.
My second hard drive however is a different story together, I'm quite new to Android though I pull a brave face about it. It's a 640 Gb (Portable western digital) hard drive that worked well at first as NTFS with paragon until recently when it couldn't mount anymore. I resorted to formatting it as well and it worked the first time after mounting only to revoke access on the second attempt at transferring files.
Please assist as I'd rather use a bigger drives to store my files. Any reason why it doesn't on double its storage size?

GizoMot said:
I have two Hard drives, one is a 320Gb (Portable Seagate momentus) which I successfully formatted to exFAT and can access & copy files back and forth through my OTG cable to the S5. It mounts perfectly as USBDRIVEA without the need for paragon NTFS+exFAT.
My second hard drive however is a different story together, I'm quite new to Android though I pull a brave face about it. It's a 640 Gb (Portable western digital) hard drive that worked well at first as NTFS with paragon until recently when it couldn't mount anymore. I resorted to formatting it as well and it worked the first time after mounting only to revoke access on the second attempt at transferring files.
Please assist as I'd rather use a bigger drives to store my files. Any reason why it doesn't on double its storage size?
Click to expand...
Click to collapse
thats odd it works fine with my 1000 Gb hard drive, did you unmount your HDD in paragon settings before you disconnect?

Yes immediately after completing the format I was able to mount on the phone as it recognized it as USBDRIVEA even without opening ParagonNTFS which I then checked in any case to get the file directory to use with root explorer.
I dismounted the drive successfully through paragon, then again on the notification panel to safely remove and that's the end of it. Next time I tried to mount I got the "OEM Evaluation" notification under the same drive I had previously mounted. I even restarted my phone assuming there was a problem with my OTG cable.
I've reformatted to the default NTFS, I can only view but not transfer to my drive from the phone or vice versa.
Another thing, on NTFS format I still get a "blank drive" notification on mounting though I can view the contents. Uninstalled paragon twice as well.