Database Info

[Q] how to root my phone?

I bought this phone //lyt.no-ip.org/blog/?p=1915
I tried z4root v 1.30 , superoneclick v1.95 , universalandroot-1.6.2-beta5. but not happened..
I can not install gingerbreak v1.20 it gives me error..":There is a problem parsing the package"
How can I root my phone? Pls help me.
Is there any manuel way?
details of my phone:
Android Firmware Information
Model number: MSM7227-1G
Firmware Version: 2.3-update1
Baseband version: 40005100E22E1134
Kernel version: Linux version 2.6.29-nxp (@XRproject)(gcc version 4.2.1) #12 PREEMPT Tue May 17
Build number: ANDROID-2011-05-17
Hardware version: HW 0.A_900
Device Info
OS Type: Android 2.3-Update1
Manufacturer: m301X
Model ID: MSM7227-1G
CPU vendor: ARM
CPU speed: 416000 (416 Mhz)
CPU version: 926Ej-S rev 5 (v5l)
Rom size: 512MB
RAM size: 200 MB
Horizontal pixels: 320
Vertical pixels 480
Camera ov2655
GPS STE GNS7560
Bluetooth: STLC 2584
CDMA: PNX67XX
FM radio: TEA 5991
MCP type: Samsung

I'm sorry but I don't wanna click on your link. Seems suspicious. Just go to your devices forum and search for a guide.

agree with upstairs

No, the site seems okay.
It's a small tech blog or something like that.
Have you tried other versions of gingerbreake?
Sent out of my Free Candy Van.

Flussen said:
No, the site seems okay.
It's a small tech blog or something like that.
Have you tried other versions of gingerbreake?
Sent out of my Free Candy Van.
Click to expand...
Click to collapse
I tried v1 , v1.1 , and v1.2 but always same error...

use OneClickRecovery_ver2.apk not need to root to install clockworkmod, an then you can install custom ROM in clockwormod (without ROM Manager)
P.S. when I bought ZTE Blade II the I had same problems an my phone wasn't sim locked..

I have to root this phone.. but I can't..
pls help me...

if i have read correctly (that you have gingerbread 2.3), you first need to downgrade to 2.2/2.2.1/2.2.2 to be able to root using those methods

sweetnsour said:
if i have read correctly (that you have gingerbread 2.3), you first need to downgrade to 2.2/2.2.1/2.2.2 to be able to root using those methods
Click to expand...
Click to collapse
Thank you for your advice but this is a chinese rom and I don't have 2.2 version for this phone.
And it cann't open recovery mode with key combination...

teuer said:
Thank you for your advice but this is a chinese rom and I don't have 2.2 version for this phone.
And it cann't open recovery mode with key combination...
Click to expand...
Click to collapse
what model phone do you have?

That's is clone of iphone which have iphone interface and android os. I believe you have not try Universal Androot, that's only way to root this phone.

porkapple said:
That's is clone of iphone which have iphone interface and android os. I believe you have not try Universal Androot, that's only way to root this phone.
Click to expand...
Click to collapse
I tried but program said I cann't root this phone.....

-help me with my SGS Fascinate.

->.^ any help will do, btw. I already rooted my Fascinate.

Just A Wish ; Custom Rom, For Iphone 5 (CLONE) MTK6575. PLEASE TAKE A LOOK.

Hello everybody, im from Turkey and already registered new in your forum.
Im also a devoloper like all of you =).
There is a Turkish Page about CHINESE PHONES, ROMS, CWM, FLASH TOOLS and mostly s3 Clones. I hope u find there anything usefull for your self... '''cepnoloji.com'''
(you cann find also this page in my signature or i cann send you through PM)
Now... My problem is like i said, need a new CUSTOM ROM that stable + nemo problemo is : For the device :
Hardware : MT6575 (MT6589 is Fake!)
Model : iPhone5
Build number : ALPS.ICS2.MP.V1.20
Build date UTC : 20130329-071641
Android v : 4.2.0
Baseband v: MAUI.11AMD.W12.22.SP.V7, 2012/09/14 18:37
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Mar 29 15:13:12 CST 2013
Uboot build v : MAIN2.2.ubt.3396
LCD Driver IC : 1-nt35510_mipi
*My original ROM; using 350MB 'RAM' only for system interfaces + datas... THAT SUX !!
*My original Mother Language is Turkish and second Language is Germany, so i cant speak good english.... THAT SUX !! too
Thank you for your Atention. Thank you for all of yours advices...
See you next time... Respect at all of DEVELOPERS USERS...

+++++++++++++

KatranXxX said:
Hello everybody, im from Turkey and already registered new in your forum.
Im also a devoloper like all of you =).
There is a Turkish Page about CHINESE PHONES, ROMS, CWM, FLASH TOOLS and mostly s3 Clones. I hope u find there anything usefull for your self... '''cepnoloji.com'''
(you cann find also this page in my signature or i cann send you through PM)
Now... My problem is like i said, need a new CUSTOM ROM that stable + nemo problemo is : For the device :
Hardware : MT6575 (MT6589 is Fake!)
Model : iPhone5
Build number : ALPS.ICS2.MP.V1.20
Build date UTC : 20130329-071641
Android v : 4.2.0
Baseband v: MAUI.11AMD.W12.22.SP.V7, 2012/09/14 18:37
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Mar 29 15:13:12 CST 2013
Uboot build v : MAIN2.2.ubt.3396
LCD Driver IC : 1-nt35510_mipi
*My original ROM; using 350MB 'RAM' only for system interfaces + datas... THAT SUX !!
*My original Mother Language is Turkish and second Language is Germany, so i cant speak good english.... THAT SUX !! too
Thank you for your Atention. Thank you for all of yours advices...
See you next time... Respect at all of DEVELOPERS USERS...
Click to expand...
Click to collapse
Hard to make a custom rom without actually having the phone, and if it is an iPhone 5 clone then chances are no one will develop a rom unless a lot of people are requesting it, sorry mate, but I hope you get your wish

If it's only got 350MB of RAM it's probably best if you downgrade to Gingerbread. Hell even with GB on my Ace, it was running out of memory even after pruning most unused apps, and apps installed to SD card.

sollick which
ricky310711 said:
Hard to make a custom rom without actually having the phone, and if it is an iPhone 5 clone then chances are no one will develop a rom unless a lot of people are requesting it, sorry mate, but I hope you get your wish
Click to expand...
Click to collapse
Yeah thanks for answering... I gueess i got my wish =))
Berties123 said:
If it's only got 350MB of RAM it's probably best if you downgrade to Gingerbread. Hell even with GB on my Ace, it was running out of memory even after pruning most unused apps, and apps installed to SD card.
Click to expand...
Click to collapse
Hmmm im talking about CLONE phones dude it isnt possible to downgrade to gingerbread. (OR I DONT KNOW HOW IT WORKS =) btw u right that memory problem sux but if your ROM's kernel support EXPANDING RAM TRY : Ram expendar Roesoft or something u cann creat a extra 'RAM' part in your phone from your internal memory. Cya =)

I am having same phone also. I bought it prerooted. Also from Istanbul when visiting. Anyway seem best chance is to be made a full backup rom with cwm or twrp and to be found another simmilar rom for doner or to be made a aosp version. I have seen somewhere around how to make a custom rom on you own but was not interested untill now

I have the same unit as yours.. though I don't know the actual brand of the clone iPhone 5.
I tried to flash my phone with zoPhone firmware coz i thought we had the same unit and specs.
But now I have a brick Android iPhone 5 clone phone. =) I wish someone can help us with this.

Thanks Kub

Reinstall Rom etc

hi
I am a total newbie in the android field. I have a Samsung grand 2 which I got rooted with cynagen mod which had pre-root installed . the baseband version is G7102DDUANE2 & kernel version is 3.4.0-2575608 se,[email protected] #1 Tue Mar 4 09:41:59 KST 2014
and build number is Gen.NxtG7102ZTUANC1. this version is not working well and one or the other app is always " unfortunately stopped working"
I would request that if some one can suggest some other good rom for this phone and the process to flash the same. Need to keep the phone rooted as need to install some apps later. also any way I can remove this previous rom and do clean install type of thing ( as we do for computers) . I would just like to delete the whole thing and install a totally new rom and work on that.
thank you.
vickram

vickramchandak said:
hi
I am a total newbie in the android field. I have a Samsung grand 2 which I got rooted with cynagen mod which had pre-root installed . the baseband version is G7102DDUANE2 & kernel version is 3.4.0-2575608 se,[email protected] #1 Tue Mar 4 09:41:59 KST 2014
and build number is Gen.NxtG7102ZTUANC1. this version is not working well and one or the other app is always " unfortunately stopped working"
I would request that if some one can suggest some other good rom for this phone and the process to flash the same. Need to keep the phone rooted as need to install some apps later. also any way I can remove this previous rom and do clean install type of thing ( as we do for computers) . I would just like to delete the whole thing and install a totally new rom and work on that.
thank you.
vickram
Click to expand...
Click to collapse
roms for your phone can be found here. installation instructions and requirements can be found in the respective thread, and in the first post of those threads.

220
bweN diorD said:
roms for your phone can be found here. installation instructions and requirements can be found in the respective thread, and in the first post of those threads.
Click to expand...
Click to collapse
What rom do you recommend ? I need to install some spyware on the phone. That's the reason I got it rooted. The first one turbo kitkat I read last night but the author seems to removed the attachments. your reply and response is appreciated.

vickramchandak said:
What rom do you recommend ? I need to install some spyware on the phone. That's the reason I got it rooted. The first one turbo kitkat I read last night but the author seems to removed the attachments. your reply and response is appreciated.
Click to expand...
Click to collapse
I don't have any direct experience with your phone, so I would just be guessing.
Usually, you just have to try them out and see what one works best for your uses.
Some ROMs will work good for some and not others, I don't know why. That's why its difficult to say what one is better than another.
Sent from my LG-VS980 using XDA Premium 4 mobile app

[Q] please, any one help me

please, I need rom for this phone :
Hardware : MT6577 (MTK6589 is Fake!)
Model : GT-I9500
Build number : ALPS.ICS2.MP.V1.3
Build date UTC : 20140304-024218
Android v : 4.4
Baseband v: MAUI.11AMD.W12.22.SP.V7.P3, 2013/12/06 10:18
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Mar 4 10:40:25 CST 2014
can any one help me .
thanks

There's a whole forum dedicated to this phone. I recommend you check there for rooting and roms.
http://forum.xda-developers.com/galaxy-s4

BlackOutFist said:
There's a whole forum dedicated to this phone. I recommend you check there for rooting and roms.
http://forum.xda-developers.com/galaxy-s4
Click to expand...
Click to collapse
No. GT-I9500 can't be with that CPU.
Looks like the OP's got a fake phone.

He is right. It is a knock off. Best bet would be search around as there are very few that even touch these devices. None of the big name roms support them so you will be looking for a port

thanks to all repliers, but this info I get from droid tool program and I don't know the real info for my phone;
so if any one can help me to flash this phone because I tried to flash it but now not power on only the screen is flashing
I'm so sorry but I need rom for it .
if any one know the real info about this phone ,please say it, this phone is like S4 exactly
thank you for all

amotawea said:
thanks to all repliers, but this info I get from droid tool program and I don't know the real info for my phone;
so if any one can help me to flash this phone because I tried to flash it but now not power on only the screen is flashing
I'm so sorry but I need rom for it .
if any one know the real info about this phone ,please say it, this phone is like S4 exactly
thank you for all
Click to expand...
Click to collapse
That's the thing is it really is not. It has a different chip, the hardware advertised is almost never true as far as memory and camera goes. The software is pirated and the kernel source is never even released. The stock software is almost never posted.
For these reasons you are gonna be hard pressed to find anything at all for that device.

Firmware for MT6572 Note30 Plus

Hello, I'm new to this Forum and I like to request some firmware to unbrick my Chinese MT6572 Note30 Plus smartphone.
Below this message some specifications of the ROM I need:
Brand model: Maimeite Note30 Plus
Chipset: MT6572
PreLoader: x6_v5_x50
Android OS: KitKat 4.4.2
Buildnumber: HY_W116_P907A-FW-Note30_Plus
RAM: 466Mb
Storage: 1,3Gb
Hopefully you wil soon help me with the firmware request.
Like to hear from you & here some thanx for helping me out...

Request the Stock ROM from OEM.

jwoegerbauer said:
Request the Stock ROM from OEM.
Click to expand...
Click to collapse
Thanks for the tip. Allready had contact with them but sadly the communication was lack and they
couln't help me. On the internet I got a "bad" firmwarefile, so I flashed it and now my screen stays white,
can hear the startup sound, but the screen maintains white...
Do you know a software package so I can view the screen of my Chinese Clone?

TrippyBlade said:
Hello, I'm new to this Forum and I like to request some firmware to unbrick my Chinese MT6572 Note30 Plus smartphone.
Below this message some specifications of the ROM I need:
Brand model: Maimeite Note30 Plus
Chipset: MT6572
PreLoader: x6_v5_x50
Android OS: KitKat 4.4.2
Buildnumber: HY_W116_P907A-FW-Note30_Plus
RAM: 466Mb
Storage: 1,3Gb
Hopefully you wil soon help me with the firmware request.
Like to hear from you & here some thanx for helping me out...
Click to expand...
Click to collapse
Did you find the firmware?

Ursuru said:
Did you find the firmware?
Click to expand...
Click to collapse
At last I did have found the right firmware package, but sadly the phone was allready ruined by a
bad software update package with SP Flash Tool. Now during the boot up the screen stays white while
you can hear the startup sound of the smartphone... Help me out please?
I try to install a recovery app like TWRP and hopefully that will help out

TrippyBlade said:
At last I did have found the right firmware package, but sadly the phone was allready ruined by a
bad software update package with SP Flash Tool. Now during the boot up the screen stays white while
you can hear the startup sound of the smartphone... Help me out please?
I try to install a recovery app like TWRP and hopefully that will help out
Click to expand...
Click to collapse
hello&greetings from las vegas..i did the same thing..w sp flash..i am not able to get the firmware for this phone...you said you found it???i was wondering if you could wrap it in a zip for me or something to that effect???please>>ty.even a url link would be better then what i have.thanks again

Servirebbe anche ame il firmware del note 30 plus

TrippyBlade said:
Thanks for the tip. Allready had contact with them but sadly the communication was lack and they
couln't help me. On the internet I got a "bad" firmwarefile, so I flashed it and now my screen stays white,
can hear the startup sound, but the screen maintains white...
Do you know a software package so I can view the screen of my Chinese Clone?
Click to expand...
Click to collapse
hello&greetings from las vegas...this is big problem,this note 30 plus..ive searched the entire net it seems,and have found 3 software packages for this phone..thats it...1has a password,so impossible to extract,one from some indonesian guy,and another,which is for alps..i have the exact problem as you do, my screen is now white after flashing,now,ive done some extensive work on this with hovatek,they seem to think that if you can hear start up sound ,thatit is def.incompatible aboot.img,amongst others,view my posts there.there is usefull info...i was wondering if you ever solved this or had gotten the right firmware??maybe we can help each other out here,this clone is trouble,but i think w the right firmware and a good version of android,this would be a kick ass clone.,..the problem is,for sure,the damn software these chinese dudes put on it in the first place...

wesside298 said:
hello&greetings from las vegas..i did the same thing..w sp flash..i am not able to get the firmware for this phone...you said you found it???i was wondering if you could wrap it in a zip for me or something to that effect???please>>ty.even a url link would be better then what i have.thanks again
Click to expand...
Click to collapse
I have send you a private message with an attachment of the firmware package. Please reply me if it was usefull or not

TrippyBlade said:
I have send you a private message with an attachment of the firmware package. Please reply me if it was usefull or not
Click to expand...
Click to collapse
i try to put a different images on mt6572 4.4.2 note80. it is corrupt. nand error ufi error. i like to see to try your file. can please provide.
thank you
Hardware : MT6572
Model : Note80
Build number : ALPS.KK1.MP7.V1.7
Build date UTC : 20210903-060958
Android v : 4.4.2
Baseband v: -----
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 3 14:08:00 CST 2021

TrippyBlade said:
I have send you a private message with an attachment of the firmware package. Please reply me if it was usefull or not
Click to expand...
Click to collapse
hello bud...hey..i was wondering..this white screen you speaking of....it is white and yellow pixels..and this popped up after you flashing it,correct?if you do have sound then prob this is acase of incompatable firmware...did you ever fix this issue???mine...is same screen,also i too,have sound,but i am not able to get sp to read this,im sure i have to short the test points,but....help

wesside298 said:
hello bud...hey..i was wondering..this white screen you speaking of....it is white and yellow pixels..and this popped up after you flashing it,correct?if you do have sound then prob this is acase of incompatable firmware...did you ever fix this issue???mine...is same screen,also i too,have sound,but i am not able to get sp to read this,im sure i have to short the test points,but....help
Click to expand...
Click to collapse
Goodevening,
Yep, I got the same result as you were speakimg of. But the phone details were fake also...
Now you have to search again for the proper firmware I guess. I shall delete the file though.
You can still evive your phone, just take patience and search for the right package

TrippyBlade said:
Hello, I'm new to this Forum and I like to request some firmware to unbrick my Chinese MT6572 Note30 Plus smartphone.
Below this message some specifications of the ROM I need:
Brand model: Maimeite Note30 Plus
Chipset: MT6572
PreLoader: x6_v5_x50
Android OS: KitKat 4.4.2
Buildnumber: HY_W116_P907A-FW-Note30_Plus
RAM: 466Mb
Storage: 1,3Gb
Hopefully you wil soon help me with the firmware request.
Like to hear from you & here some thanx for helping me out...
Click to expand...
Click to collapse
does anyone have the note 30 plus firmware?

[email protected] said:
does anyone have the note 30 plus firmware?
Click to expand...
Click to collapse
yes,i have it..this is mtk chip,soc...you flashing w spft,n.p..i am currently working on a comprehensive list of which programmer file goes with which phone also..i figured id just throw that out there..lol..quallcomm giving me some headaches lately..anyways i will upload this firmware for you

here is firmware for note 30

wesside298 said:
here is firmware for note 30
Click to expand...
Click to collapse
should I deodex it from the google stuff?

mailipoovu said:
i try to put a different images on mt6572 4.4.2 note80. it is corrupt. nand error ufi error. i like to see to try your file. can please provide.
thank you
Hardware : MT6572
Model : Note80
Build number : ALPS.KK1.MP7.V1.7
Build date UTC : 20210903-060958
Android v : 4.4.2
Baseband v: -----
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 3 14:08:00 CST 2021
Click to expand...
Click to collapse
By2_9009_Smart_(ALPS.KK1.MP7.V1.7)_by_(FirmwareOS.com).zip | by Shohag Malik for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
here's your proper firmware

guess i'll make my own firmware for this note 30 plus

notnoelchannel said:
By2_9009_Smart_(ALPS.KK1.MP7.V1.7)_by_(FirmwareOS.com).zip | by Shohag Malik for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
here's your proper firmware
Click to expand...
Click to collapse
used the file and i get the message
error: s_ft_enable_dram_fail (4032)
[emi] enable dram failed!
[hint]lease check your load matches to your target which is to be downloaded
mediatek splash tool v5.2016.00
in the download 'list' i choose 'format-all and download' in the format tab , i select 'validation' and auto
I did a recovery before this mess. That one did not contain 'preloader' and 'userdata' image files. I copied the files from 'MT6572_ZTE_Kis_II_Max_P172R10_4.4.2_DIS_EUR_QB18D_P172R10V1.0.0_clean' this one. I get the first menu 'recovery, fastboot, normal'. If i select anyone, nothing happens. The panel light on. Phone charge works. After charge complete, the back flash light on. From PC fastboot detect the device. When I did the fastboot to flash recovery image. 'no partition error'.
thank you for your comments.

mailipoovu said:
i try to put a different images on mt6572 4.4.2 note80. it is corrupt. nand error ufi error. i like to see to try your file. can please provide.
thank you
Hardware : MT6572
Model : Note80
Build number : ALPS.KK1.MP7.V1.7
Build date UTC : 20210903-060958
Android v : 4.4.2
Baseband v: -----
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 3 14:08:00 CST 2021
Click to expand...
Click to collapse
The additional information
4.4.2, Android 1630651846
NOTE80, Build/KOT49H
Can some one give the custom-rom complete files to unbrick.
The brand says 'hello'
thank you