Hi,
Wondering if anyone has problems connecting a smartphone ? When trying to connect to the usb port of the dock on TF700T my Sony Xperia S is not recognized, no message appears that "mass storage device" or "usb device is being prepared".
kind regards,
What Android version is your phone running?
Once my phone was in USB connect mode, I had to go to the transformer settings > storage and then scroll down to the bottom and select the option to mount the mass storage device.
MartyHulskemper said:
What Android version is your phone running?
Click to expand...
Click to collapse
Currently running version 4.0.4
kind regards,
GaryParr said:
Once my phone was in USB connect mode, I had to go to the transformer settings > storage and then scroll down to the bottom and select the option to mount the mass storage device.
Click to expand...
Click to collapse
Doesn't work for me, there is no available device to mount, there is no sign it is even connected in usb mode,my phone simply isn't recognized for some reason.
kind regards,
profiler270 said:
Doesn't work for me, there is no available device to mount, there is no sign it is even connected in usb mode,my phone simply isn't recognized for some reason.
Click to expand...
Click to collapse
I never saw any pop-ups or notifications in the status bar either. My first thought was that the device didn't know my phone was attached. I had to do some google-fu before I found the suggestion that, even though you don't see any notifications, to look at the storage settings anyway. Very strange that nothing is showing up for you. This might seem odd, but would you happen to have a USB hub you could run through? Try connecting the phone to the hub in storage mode, then connecting the hub to the transformer.
I can confirm that I did not have any notification either. My phone however detect the USB plug and I could activate USB mass storage on its side.
Then i needed to manually mount the external storage in settings. This done, I have access to the external SD card of the phone but not to the internal one.
Dehele said:
This done, I have access to the external SD card of the phone but not to the internal one.
Click to expand...
Click to collapse
Besides the fact i can't seem to connect it, that would be a problem also, because with the Sony Xperia S there is no SD card slot available for external memory, only 32GB of internal memory.
kind regards,
Not quite satisfied by my first test, I have made it again. With the two cards in the phone I can only access the external one. So I retreave the external card out of the phone and renew the test. this time, I can access the internal card.
So it seems that i can only see one card at a time, even if I need to mount it manually.
In any case if you have only one card, you should be able to access it.
Related
I'm a Nexus One owner, previously G1/MyTouch3G also, so I'm no n00b.
With all Androids, if you have a microSD card, you just plug in the USB and you can mount the microSD card as a drive and copy stuff to it. Which is necessary since we have stupid small ass internal storage. Also it's where we copy pictures/mp3s to it.
So now, with the Samsung Galaxy S series of phones with 16 GIGS of internal storage, how do we ACCESS this storage from the PC so we can copy pictures/mp3s to the internal storage? Is there a way to MOUNT the internal storage?
I haven't read a SINGLE thing about this.
It would REALLY suck if we had to manually do it: Mount microSD, copy stuff to it, unmount, use a file explorer on the phone itself and manually move the files into internal storage.
Yeah there's probably root apps and such that you can ssh in, or use adb to transfer, but that's NOT ideal.
Would be nice is the internal storage auto mounts when mounting microSD like Garmin GPS systems. Garmin GPS systems have SD card slot, when you plug it in, you can see the INTERNAL Garmin memory as well as whatever is on the SD card. (You'll see 2 removable storage devices mounting in Windows).
I think when it's plugged in, the normal notice pops up in the notification bar. But instead of just asking you to mount, it asks if you want to mount internal or the sd card.
nxt said:
I'm a Nexus One owner, previously G1/MyTouch3G also, so I'm no n00b.
With all Androids, if you have a microSD card, you just plug in the USB and you can mount the microSD card as a drive and copy stuff to it. Which is necessary since we have stupid small ass internal storage. Also it's where we copy pictures/mp3s to it.
So now, with the Samsung Galaxy S series of phones with 16 GIGS of internal storage, how do we ACCESS this storage from the PC so we can copy pictures/mp3s to the internal storage? Is there a way to MOUNT the internal storage?
I haven't read a SINGLE thing about this.
It would REALLY suck if we had to manually do it: Mount microSD, copy stuff to it, unmount, use a file explorer on the phone itself and manually move the files into internal storage.
Yeah there's probably root apps and such that you can ssh in, or use adb to transfer, but that's NOT ideal.
Would be nice is the internal storage auto mounts when mounting microSD like Garmin GPS systems. Garmin GPS systems have SD card slot, when you plug it in, you can see the INTERNAL Garmin memory as well as whatever is on the SD card. (You'll see 2 removable storage devices mounting in Windows).
Click to expand...
Click to collapse
No luck accessing internal RAM from me either (and I think other reviewers on CNET had the same bad luck)...Just got mine on Friday, and it is great except for connecting to the PC (64bit Vista) looping through MTP mode (the device keeps flashing back and forth between main screen and MTP mode, and the PC keeps trying to install the right driver to access the device as a USB mass storage device). Multiple restarts and messing with the device in Device Manager yielded no results, so I just used removable SD card to add files to the device. That obviously works fine, but is irritating.
Anyone else having trouble accessing Captivate as Mass Storage Device?
Best wishes to all.
I can't tell if you're using the Captivate driver located here.
Loosely related...I'm curious as to whether all the work going on in the Modaco SGS forums to optimize I/O (such as this) is applicable at all to the Captivate...anyone know?
I installed the driver on my Win7 machine.
I set up the USB to ask when I plug it in. I select Mass Storage. Two drives show up in the list of drivers, but when I click either one, it says "Please insert a disk in the removable disk".
What am I missing?
[EDIT]
Hang on, there was a window behind my windows with a message about install failure, device unplugged. Trying again.
[EDIT2]
Installed again. Didn't get error. Using same method as above, still no go.
So then I select PC Internet the next time I plugged in the USB cable, and it then gave the Windows POPUP saying Installing Drivers, and finished with Ready to Use. But, now I don't see the drives in Explorer. So I launched Windows Mobile Device Center...didn't see anything.
In settings goto Applications > USB Settings > select "Mass Storage" and viola!
moosefist said:
In settings goto Applications > USB Settings > select "Mass Storage" and viola!
Click to expand...
Click to collapse
I have the popup set to ask, and as noted in my post, I did select Mass Storage first couple times. It does show drives, but but when I click either one, it says "Please insert a disk in the removable disk".
Thanks for the suggestion though.
The windows 7 drivers for htc android phones are hosed in general for me. I have to use linux in a virtual machine to access ANY htc android phone.
once you hit mass storage, if you bring the notification bar down, you can click the "usb" setting and select mount. Perhaps that will work? (or is that for mac only?)
once you hit mass storage, if you bring the notification bar down, you can click the "usb" setting and select mount. Perhaps that will work? (or is that for mac only?)
yes, when you do this you will be able to access both drives without it asking you to insert a disk
I am new to android so I had this problem for a while. But you made my day madjsp. I have been trying to get this phone connected to my pc for the past 2 days, but with very little success. The kies software detected my phone only twice. But this connection was very erratic. Just to copy 200mb of photos the link showed a transfer time of 7 hours. The device would often disconnect itself after like 10 secs.
But until samsung fixes their software and drivers, the mass storage option works very reliably for transfering files between pc and (internal+external) sd cards.
My directions:
1) Choose the Mass storage option in USB settings of the device
2) Then connect to the comp.
3) There should be a message in the notification bar: "USB connected. Select to copy files to/from your computer" . Tap the notification and select mount from the popup.
Now you can view both sd cards from pc and transfer files to/fro w/ ease.
The last step is the most important one. For all those having the problem where clicking the drive in the pc reads "Insert a media into the drive", this should fix the problem. Maybe it is something android specific that I didn't know...
Same thing happen to me, i found drivers on this site and instead or hitting mass storage when it is connect to PC, I hit media PLAYER and it worked fine i was able to see the 16GB and my SD card, Loaded music and videos and pics with no problem, also remember only plug into the back of computer. you can find drivers on this site that will work on like pages 3-6
doomah69 said:
Same thing happen to me, i found drivers on this site and instead or hitting mass storage when it is connect to PC, I hit media PLAYER and it worked fine i was able to see the 16GB and my SD card, Loaded music and videos and pics with no problem, also remember only plug into the back of computer. you can find drivers on this site that will work on like pages 3-6
Click to expand...
Click to collapse
Selecting Media player worked for me as well. I now can see and have access to both my internal and external / removable SD card. Good lookin' out!
Hey guys,
1) thanks to many for tips/tricks etc, especially easy root
2) Man this GPS is a pain in my ass. Otherwise, BEAUTIFUL phone. (Day 1, 20 minutes into launch day)
Real problem:
I got weird behavior yesterday, wherein I connected the phone to my laptop (tried them all same prob) and it's configured as auto Mass Storage (I use DoubleTwist) but now I see the device, but NOT the SD cards...
Things recently done that could be a part of the issue, I suppose: installed SDK.
Now, unless I have it in USB dbg, and using Droid Explorer, I can't even friggen' tell it's there!
Any ideas? :/
Also, yesterday on the way home where it suddenly told me the that the SDCARD was invalid... rebooted and it's fine.. but some media arent locating right.
UHg.
Please help if you can, and TYIA
When i had USB Debugging on i couldn't see Drives also , turned that off , and all is back to normal.
And Mass Storage mode on off course. And once connected select Mount SD cards from phone.
I did have some weird issues with mounting/unmounting behavior when I connected the phone to my computer, but when I toggled USB debugging it started working perfectly.
in your phone go to "Settings -> Applications -> Development -> USB debugging" and enable that option. This allows both my internal SD and my external SD card to show up. While the phone is connected to the computer, it unmounts those cards from the phone so if you look up your "Settings -> SD card and phone storage" you will see them marked as unavailable. But after disconnecting the phone will remount them.
Well,
I've gone back and toggle usb debugging back on.
As point of fact Astro is now telling me /sdcard is empty, and threw me an error "error creating external cache". Doesn't help that Settings > SD Card and phone Storage > Internal SD card is showing me unavailable.
Oh crap.. :/ guess I might be exchanging soon
max_warheads said:
Well,
I've gone back and toggle usb debugging back on.
As point of fact Astro is now telling me /sdcard is empty, and threw me an error "error creating external cache". Doesn't help that Settings > SD Card and phone Storage > Internal SD card is showing me unavailable.
Oh crap.. :/ guess I might be exchanging soon
Click to expand...
Click to collapse
This happened to me before I enabled debugging. Simply power down the phone and restart it. It will remount your drives.
I've power cycled this thing so many times over the last day, it'd think a weeks gone by.
New whacky behavior... apparently the included Music Player sees my songs, but DoubleTwist doesn't. Also, about half my MP3's have 4 entries... oh what fun.
Looks like I might just be backing up my contacts, factory reset, format SD and reflash the stock image :/
When connecting to the PC with MTP, it loses the SD card if the PC doesnt properly talk MTP to it. Reboot.
When connecting to my work PC as mass storage, its not even seen on the front ports.
Reboot phone.
Set to USB to Mass Storage.
Install Samsung drivers on PC (needed? idk)
Install DoubleTwist on PC.
Uninstall DT on phone.
Reboot Phone.
Install DT on phone.
Plug into back port of work PC
Working drive.
Oh wtf. Wierd. I'll wax my config at home entirely tonight....
So i installed CM 7.1 tonight and when i plug my phone into the computer using my usb cable it detects my phone, charges it and allows me to mount for usb storage.
when i mount for usb storage i do not see the sd card under removable hard drives. im new to all of this rooting and this is my first time rooting and installing a custom rom so any help is greatly appreciated.
thanks!
Search on forums. Theres a thread about that. I think you need a proper driver for you pc, in order to communicate with your phone.
Sent from my LG-P999
i have searched the forums, most of the issues are saying its not mounting and what not. i do have the LGdriver downloaded otherwise i would not have been able to put the necessary files onto my sd card. the problem started after i rooted my phone. my computer recognizes the phone when i plug it in but once i got into USB mass storage mode it doesnt show up in my removable hard drives..
sorry if sounds confusing, im having a hard time describing what exactly is wrong with it.
when i click turn on usb storage it'll say USB storage is on and the green android guy will turn orange and all the apps that are on my SD card are no longer in the app menu. but i have no way of copying files over to my sd card.
Go to Settings>Applications>Development>USB Debugging and turn that on, then plug in you USB as usual.
Hope it works
it worked! thanks!
at least you guys arent having the annoying problem im having.........every other day my phone says i have a blank sd card and when i put it in the pc it tells me it is damaged. It only does it when i mount it to usb. I think it is because the phone gets a little hot sometimes. Quite annoying
Hi. I've searched but found no answer so here is my thread . So I am somewhat unhappy with how my Verizon GSIII is behaving. Since day 2 I learned I cannot connect this phone as a disc drive on WIndows or Linux. The only options I get when connected via USB to a computer are Media device (MTP) and Camera (PTP). My friend show me his ATT GSII last night. It connects as a disc drive (regular flash drive behavior).
When connecting an external HDD via USB Android should recognize that drive as a mass storage device. His ATT SIII did this, my Verizon SIII did not. I got the message in the notification area "USB Connect" followed by "USB Disconnected." Thankfully, I have no files I want to transfer onto my device as I'm coming from an HTC Incredible, but in the future I will want to browse my file system on my laptop.
Am I the only one here with these issues? I am not rooted.
-Justin
Edit: I found an article which looks like I can browse the external SD Card but not hte internal memory. This is only for root users however. Enable USB Mass Storage for root.
If your Galaxy S3 connects as mass storage, post the carrier.
My S3 shows up as separate internal and external devices when I plug it into my USB port and is listed as SCH-I535 when ejecting. However my Nexus show up as an MTP device when ejecting. Both devices are rooted.
So there may be hope. I'm going to root today, well try to. Can you link me to the ROM you flashed so I have a higher possibility of achieving what I want?
Will every build ROM found in the developer section here get rid of the OEM functionality?
I have the same 2 options as you when connecting to a PC, but, when connected windows will pop the "browse for files" instantly and the 2 drives will be displayed under Computer, one for the internal SD and for the external.
This was like this from the first time i plugged the phone in, before root, same after.
It actually seems like we get to skip the step of "Enable USB sharing" which I find great, plug in and the drives pop.
JMooney5115 said:
So there may be hope. I'm going to root today, well try to. Can you link me to the ROM you flashed so I have a higher possibility of achieving what I want?
Will every build ROM found in the developer section here get rid of the OEM functionality?
Click to expand...
Click to collapse
I used root66 to do mine.
However I had access to both drives prior to doing the root update.
Both of you seem to have more luck than I'm having. When I plug it into Windows I had no way of browsing files. In (K)ubuntu when I plug it in a popup has an option to browse which takes me to 1 folder names 'USB PTP Class Camera' which I can get to the internal storage, but not the SD Card. I'll be making a trip to Verizon today for sure. It makes me wonder if a rooted stock image from Samsung would fix the issue.
Quick question.
Which drivers did you install?
Why do I need drivers, I'm not doing anything but reading the flash memory? It should just work in both Linux and Windows.
Note that the guide to enable UMS on the S3 is for the International version, not the US version. The US version doesn't yet have a UMS option.
You shouldn't (and don't) need drivers for the SD storage to show up on your computer.
Just to test it I connected my S3 to my gf's laptop running W7, both drives popped right away there too.
I just want to make a note: Can't remember exactly what I did but after a few drivers on my AT&T SGS III I am able to just plug into my computer and move files around.
Can anyone helo me transfer video files...pic files i can transfer but all the video files wint...i get an error message on the computer ( pc ) and my s3 says syncing and does nothing. Its a verizon gs3.
skillzo1: How are you trying to transfer these video files?
Madcat81 said:
Just to test it I connected my S3 to my gf's laptop running W7, both drives popped right away there too.
Click to expand...
Click to collapse
Thanks for the test. Just to be sure, you have a Verizon S3?
JMooney5115 said:
Thanks for the test. Just to be sure, you have a Verizon S3?
Click to expand...
Click to collapse
Sure do.
ICS devices use MTP to transfer files, not UMS. I have a verizon S3 and the drives appear when I plug it in. I had USB debug mode enabled and when I plugged it in it automatically downloaded and installed drivers and worked after that. You shouldn't need root to do all of this.
kthung, thanks for that tid-bit of information. Now how do I do this in Linux? I can browse internal memory, but not my micro SD card via USB.
JMooney5115 said:
kthung, thanks for that tid-bit of information. Now how do I do this in Linux? I can browse internal memory, but not my micro SD card via USB.
Click to expand...
Click to collapse
Hmm unfortunately I don't really know anything about linux. Maybe check this thread out http://forum.xda-developers.com/showthread.php?t=1785243
Hi all,
Apologies if this has been answered elsewhere but I have looked and cant find anything.
My One S is Jelly Bean 4.0.1 (un-rooted)
The problem I have is basically this.
I have a Micro-B Usb Otg On The Go Cable and Integral MicroSD USB Card Reader with a 32gb Micro SD.
When I first put all this together and plugged into the USB slot of the phone everything was fine, the little red light on the Integral MicroSD USB Card Reader was lit up. The message of Unable To Charge Device was coming up but the phone was also mounting the storage for reading via Astro File Manager no problem, so I was able to play MP3's and 4's and so on. But then it literally just stopped reading the Micro SD card and the Micro USB Card Reader is not lighting up at all.
Any help will be greatly appreciated as I am at a lost as to why it would be working perfectly one second and then not another.
Thanks you.
Follow up.
Been doing a little bit more looking into this and it looks like it has to do with USB hosting. Is there any reason my phone would just stop hosting a OTG USB Flash Drive? As i mentioned before it work fine for a while and literally just stopped recognizing that there was any Mini Sd attached.
spruggs said:
Hi all,
Apologies if this has been answered elsewhere but I have looked and cant find anything.
My One S is Jelly Bean 4.0.1 (un-rooted)
The problem I have is basically this.
I have a Micro-B Usb Otg On The Go Cable and Integral MicroSD USB Card Reader with a 32gb Micro SD.
When I first put all this together and plugged into the USB slot of the phone everything was fine, the little red light on the Integral MicroSD USB Card Reader was lit up. The message of Unable To Charge Device was coming up but the phone was also mounting the storage for reading via Astro File Manager no problem, so I was able to play MP3's and 4's and so on. But then it literally just stopped reading the Micro SD card and the Micro USB Card Reader is not lighting up at all.
Any help will be greatly appreciated as I am at a lost as to why it would be working perfectly one second and then not another.
Thanks you.
Click to expand...
Click to collapse
You seem to be stock so not sure what's up with that but could try factory reset in the bootloader has long has you haven't changed recovery but backup what's on the SD Card because that will get wiped too.
Darknites said:
You seem to be stock so not sure what's up with that but could try factory reset in the bootloader has long has you haven't changed recovery but backup what's on the SD Card because that will get wiped too.
Click to expand...
Click to collapse
Thanks Darknites,
I have reset hard from the settings menu, does it make a difference if i reset from bootloader? I have downloaded USB Host Controller and look at what results I get from running that and I get the SC3 USB Host Driver Not Found which I believe is something to do with the chip set which doesnt apply to my phone but I also get the message of USB Root Hub Present but I also get Not Present sometimes when re-running and the same with USB Host Mode is Active and then sometimes Not Active after re-running the Host Controller App.
I did read somewhere that its possible that certain chip/chips might have been damaged/fried by an extended use of USB Hosting to a flash drive, is this correct?
Thanks again for the reply.
spruggs said:
I did read somewhere that its possible that certain chip/chips might have been damaged/fried by an extended use of USB Hosting to a flash drive, is this correct?
Click to expand...
Click to collapse
I havnt heard of that in YEARS, and even that was in most cases a false rumor. I have never encountered a chip dying by being used properly.
If you short-circut the cables or something - then yeah, thats a different story.
spruggs said:
Thanks Darknites,
I have reset hard from the settings menu, does it make a difference if i reset from bootloader? I have downloaded USB Host Controller and look at what results I get from running that and I get the SC3 USB Host Driver Not Found which I believe is something to do with the chip set which doesnt apply to my phone but I also get the message of USB Root Hub Present but I also get Not Present sometimes when re-running and the same with USB Host Mode is Active and then sometimes Not Active after re-running the Host Controller App.
I did read somewhere that its possible that certain chip/chips might have been damaged/fried by an extended use of USB Hosting to a flash drive, is this correct?
Thanks again for the reply.
Click to expand...
Click to collapse
Ya in bootloader everything gets wiped even sd.
I did cross my mind re the cable because the drives are fine in my PC, I know they are powered there though. I might try another OTG cable, there cheap as. Its just strange that one minute the Micro SD drive was working perfectly and then kaput.