Hi,
I just received my TF700 and trying to connect to my XP PC to copy music and movies on to it.
My computer does not succeed in installing the necessary drivers to make it look like DOK.
What am I doing wrong? This should be a simple task (how will I be able to fill my 64GB ?)
Thanks,
edit: after installing PC suit from TF101 support page it works.
But why can't we charge the TF700 via USB....?
kubeb said:
Hi,
I just received my TF700 and trying to connect to my XP PC to copy music and movies on to it.
My computer does not succeed in installing the necessary drivers to make it look like DOK.
What am I doing wrong? This should be a simple task (how will I be able to fill my 64GB ?)
Thanks,
edit: after installing PC suit from TF101 support page it works.
But why can't we charge the TF700 via USB....?
Click to expand...
Click to collapse
I could be wrong but iirc i've read somewhere that in order to charge it from USB you have to power off your device first.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
kubeb said:
Hi,
I just received my TF700 and trying to connect to my XP PC to copy music and movies on to it.
My computer does not succeed in installing the necessary drivers to make it look like DOK.
What am I doing wrong? This should be a simple task (how will I be able to fill my 64GB ?)
Thanks,
edit: after installing PC suit from TF101 support page it works.
But why can't we charge the TF700 via USB....?
Click to expand...
Click to collapse
There's simply not enough power coming from the USB port.
The reason why connecting failed is because XP doesn't support the MTP connection, which the Infinity uses, from the beginning.
Sent from my Galaxy Nexus using xda premium
kubeb said:
Hi,
I just received my TF700 and trying to connect to my XP PC to copy music and movies on to it.
My computer does not succeed in installing the necessary drivers to make it look like DOK.
What am I doing wrong? This should be a simple task (how will I be able to fill my 64GB ?)
Thanks,
edit: after installing PC suit from TF101 support page it works.
But why can't we charge the TF700 via USB....?
Click to expand...
Click to collapse
Just for reference for new users reading through this thread: you cannot access an Android 4.x+ device as a USB Mass Storage device AT ALL -- this was sacrificed for the more stable and safe MTP connection. The latter should work if you install the drivers, as the OP already has found out.
MartyHulskemper said:
Just for reference for new users reading through this thread: you cannot access an Android 4.x+ device as a USB Mass Storage device AT ALL -- this was sacrificed for the more stable and safe MTP connection. The latter should work if you install the drivers, as the OP already has found out.
Click to expand...
Click to collapse
I would have to respectfully disagree. My SGS2 running ICS has the USB mode ability. Settings / More (under data usage) / USB Utilities / USB mass storage.click the button, connect the USB cable, and there ya go!
Unfortunately, this option is either disabled or nonexistant in the transformers.
pileot said:
I would have to respectfully disagree. My SGS2 running ICS has the USB mode ability. Settings / More (under data usage) / USB Utilities / USB mass storage.click the button, connect the USB cable, and there ya go!
Unfortunately, this option is either disabled or nonexistant in the transformers.
Click to expand...
Click to collapse
I reckon that's because the SGSII is not a original 4.0 device. It came with 2.3 on the market.
However I don't know if the manufacturers are still allowed to use it in their new devices.
pileot said:
I would have to respectfully disagree. My SGS2 running ICS has the USB mode ability. Settings / More (under data usage) / USB Utilities / USB mass storage.click the button, connect the USB cable, and there ya go!
Unfortunately, this option is either disabled or nonexistant in the transformers.
Click to expand...
Click to collapse
This is because the SGS2 was not released with ICS. It was upgraded to ICS. The real reason why UMS is not available on native ICS devices (aside from mounting external SD cards with UMS) is because Google decided to use one large volume for the internal storage instead of several. Devices that were upgraded to ICS after being release still have several volumes instead of one. Trying to rewrite the partition table during an update would be destructive, causing the loss of all data, and no manufacturer would want to do that to their customer's devices.
darkkterror said:
This is because the SGS2 was not released with ICS. It was upgraded to ICS. The real reason why UMS is not available on native ICS devices (aside from mounting external SD cards with UMS) is because Google decided to use one large volume for the internal storage instead of several. Devices that were upgraded to ICS after being release still have several volumes instead of one. Trying to rewrite the partition table during an update would be destructive, causing the loss of all data, and no manufacturer would want to do that to their customer's devices.
Click to expand...
Click to collapse
When updating with kies it would copy personal data to the computer and restore that data after the update was complete. I wonder if the S3 has this functionality (usb mode). I know with the S2 there was a big deal about upgrading to ICS because it had to repartition everything, lots of warnings about losing data on the phone, never stopped us we just made backups and away we go. I dont see how the prime is much different, the USB mode COULD be put into it the same way it was put into the samsung roms, doesnt even need to be default, just there for those people like me that prefer it.
kubeb said:
Hi,
I just received my TF700 and trying to connect to my XP PC to copy music and movies on to it.
My computer does not succeed in installing the necessary drivers to make it look like DOK.
What am I doing wrong? This should be a simple task (how will I be able to fill my 64GB ?)
Thanks,
edit: after installing PC suit from TF101 support page it works.
But why can't we charge the TF700 via USB....?
Click to expand...
Click to collapse
Works fine under Win 7, tablet connected as media device, and i can confrim that the charging icon is active when connected and in config menu under battery says: charging.
kind regards,
profiler270 said:
Works fine under Win 7, tablet connected as media device, and i can confrim that the charging icon is active when connected and in config menu under battery says: charging.
kind regards,
Click to expand...
Click to collapse
As I said XP doesn't support MTP devices. Win 7 does it though.
Sent from my Galaxy Nexus using xda premium
pileot said:
I would have to respectfully disagree. My SGS2 running ICS has the USB mode ability. Settings / More (under data usage) / USB Utilities / USB mass storage.click the button, connect the USB cable, and there ya go!
Unfortunately, this option is either disabled or nonexistant in the transformers.
Click to expand...
Click to collapse
As said above, MTP mode is standard in ICS and UMS is no longer supported (and indeed the reason was the single-volume approach, and the fact that MTP makes the filesystem available to the host computer without the need for unmounting, and thus eliminates the risk for introducing filesystem errors on the host -- the Android system keeps everything under control and access to the filesystem is transparent to the host.)
Obviously, anything can be hacked together, and there are apps that seem to able to provide UMS mode.
Not a matter of disagreeing, but unfortunate reality.
---------- Post added at 10:30 PM ---------- Previous post was at 10:29 PM ----------
pileot said:
When updating with kies it would copy personal data to the computer and restore that data after the update was complete. I wonder if the S3 has this functionality (usb mode). I know with the S2 there was a big deal about upgrading to ICS because it had to repartition everything, lots of warnings about losing data on the phone, never stopped us we just made backups and away we go. I dont see how the prime is much different, the USB mode COULD be put into it the same way it was put into the samsung roms, doesnt even need to be default, just there for those people like me that prefer it.
Click to expand...
Click to collapse
By the way, I strongly prefer UMS mode as well, since the computers at work (hospital) are pretty much closed-off to anything included installing any software or drivers, and they disallow MTP. Previously, I could at least access my SGS2 as a thumb drive, but with my current ROM (RootBox ICS) that's no longer an option.
Nebucatnetzer said:
As I said XP doesn't support MTP devices. Win 7 does it though.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Windows XP does support MTP, but one would need to have Windows Media Player 10 or later installed (WMP10 added MTP).
hello kubeb
If you still searching, refer to my story on this thread:
http://forum.xda-developers.com/showthread.php?t=1861444
wish you succes
Related
Hi,
Quick background: Former sys admin with some Unix experience. Already own a Toshiba Thrive rooted with CWM. Gave that to the wife and got me the GT 7+. Read the forum here prior to buying. Rooted on day one.
Stats: GT-P6210 Build: HTJ85B.UEKL1 P6210UEKL1
PC: Windows 7 21 Bit Enterprise SP1
Kies: Kies_2.1.1.11124_17_6
Later on the first day, after installing aps, I installed latest version of Kies and plugged it in with the supplied usb cable in order to transfer some files to my Sandisk 32Gb microsd. Kies already running and debugging off as per the instructions. Results: Tab plays a notice and I see the MTP connected icon. My pc does NOTHING. No sound, no notice, Kies does nothing.
I unplugged and tried the other 3 ports. 2nd port gives me same result and on the 3 & 4 port I lose the tab's MTP notice and it begins charging.
So, this is what I have done in order:
1. Re-installed Kies--->same result. No MTP notice on tab.
2. Debugging on--->same
3. Tried in on my room mate's W7 machine---> Alas! I get a driver installation and I am able to see both drives. I quickly unplugged and thanked him.
4. Cleaned my pc by:
a. Deleting all USB controllers
b. Deleting all USB installations on registry (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSBSTOR)
c. CCLEANER the whole system.
d. Turn off. Pull off battery. Press power button to drain motherboard.
e. Restart and re-install USB controllers.
f. Restart again.
5. Plug in again--->Tab plays a notice and I see the MTP connected icon. My pc does NOTHING. No sound, no notice, Kies does nothing.
6. Pull my hair, bang my head, wished I would have kept the Thrive. (just plug, and drag and drop)
Left it plugged to the pc overnight. Next morning I see the found new device on systray and it is trying to find drivers. I quickly open Kies and see some activity as it tries to connect. and after a few seconds, it stops. Result: No drivers installed, no Kies recognition, no drive letters, nothing.
8. At this point I ask my room mate to let me plug in on his pc to see if he still sees it and nothing happens on his pc.
9. I wipe the table back to stock.--->Tab plays a notice and I see the MTP connected icon. My pc does NOTHING. No sound, no notice, Kies does nothing. Then after I tried other ports, it begins charging and I lose the MTP notice.
10. I re-roo,t reconfigure the beast, and do a backup. Tablet is running smooth as silk, but it never connects. This all happened in the last three days.
11. Last thing I did, as I am writing this with the tablet plugged in to the pc and MTP notice on, was to un-mount the microsd and remount. MTP re-initializes and it does nothing.
I may be suspecting a cable and unfortunately, I am in no position to get my hands on another one in a timely manner. At this point, I could reflash back to a stock firmware, send back to amazon and wait for another one to come in three to four weeks (I am deployed to a remote area) and I just don't want to do that.
The tab runs great. Love the size and speed. I guess I can continue taking out the microsd card out every time I want to add a file, but I am afraid that it may eventually end up ruining the card and possibly the tablet.
Please help. I have scoured the internet, but all I ever find is solutions that I already have tried.
Thanks in advance,
Sal
you could use adb over wifi.. There are a few apps in the market for this. Does adb recognize the tab when its plugged in via USB?
Also try Android commander, it is a GUI based adb server, you should be able to navigate to sdcard/extstorages/ and your external card should be there
Sent from my HTC Glacier using Tapatalk
You could also use a file explorer like Root Explorer and Dropbox to transfer files back and forth.
Have you tried a different USB port on the PC? like one round the back.
Also, try without the sdcard in.
Ticked/unticked USB development/debugging on the tablet?
If it works on another computer though it would suggest its your own PC which has the problem, not the tablet.
tried with Linux on the same PC?
Does Odin see the tablet when in download mode?
if you have clockwork mod recovery, doesn't that have a USB mount option ? It does on my gs 2. My tab isn't with me to check.
Oh and kies has an option to reinstall the driver. Did you try with the older version of kies again?
Sent from my GT-I9100 using xda premium
ringnutz said:
you could use adb over wifi.. There are a few apps in the market for this. Does adb recognize the tab when its plugged in via USB?
Also try Android commander, it is a GUI based adb server, you should be able to navigate to sdcard/extstorages/ and your external card should be there
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
I'll try adb. I will install it and see if how it works. Time is tight so I will report later.
Sal
crunchie-uk said:
Have you tried a different USB port on the PC? like one round the back.
Also, try without the sdcard in.
Ticked/unticked USB development/debugging on the tablet?
If it works on another computer though it would suggest its your own PC which has the problem, not the tablet.
tried with Linux on the same PC?
Does Odin see the tablet when in download mode?
if you have clockwork mod recovery, doesn't that have a USB mount option ? It does on my gs 2. My tab isn't with me to check.
Oh and kies has an option to reinstall the driver. Did you try with the older version of kies again?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have done all that you mentioned with the exception of Linux and Odin. I am not going to get into Linux as that would start a whole other project. I will install ADB to see if I can force the drivers.
I just tried the CWM mount USB mount but get "E: Unable to open ums lunfile (No such file or directory)"
Also, on my friend's pc worked once but not after that.
I will continue to explore the ODIN suggestion.
Thanks,
Sal
chad_k69 said:
You could also use a file explorer like Root Explorer and Dropbox to transfer files back and forth.
Click to expand...
Click to collapse
I use ES Explorer (wonderful app!) now. My end-state is not to have to remove the card every time I transfer a file.
Sal
EDIT: Sorry, I see now the dropbox suggestion. Yes that would work for smaller files, but I am not sure that dropbox can handle movie size files. It would be a last resort solution.
Thanks,
Sal
Adb is probably going to be your best bet. It can be a pain to set up at times, but in the long run is a must have for any Android device. Kies normally installs the drivers that adb uses, so hopefully you can get them to install. If it still doesn't work I would suggest swapping it out for a new tab, as much as that sucks. If you need help, I constantly check these forums, so I should be able to provide some support
Sent from my HTC Glacier using Tapatalk
ringnutz said:
Adb is probably going to be your best bet. It can be a pain to set up at times, but in the long run is a must have for any Android device. Kies normally installs the drivers that adb uses, so hopefully you can get them to install. If it still doesn't work I would suggest swapping it out for a new tab, as much as that sucks. If you need help, I constantly check these forums, so I should be able to provide some support
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
Well, got ADB installed and running. Set the path and ran it. Plug the tab with debugging clicked on, and got "MTP connected" on the tab's screen. At this point I am excited since I never seen the "MTP connected " on debug mode. I typed the "adb devices" command and got "List of devices attached" ___________________.
Yep, blank. Obviously the pc is not seeing it. My conclusions are the following:
1. Bad cable
2. Bad device
The fact that it recognized once on my room mates' pc and then none at all, and the fact that it was recognized on my pc for a brief random time, then it means that the device can't handshake with the motherboard and thus is a communication issue.
I'll try my luck with Samsung tech support and see if they can replace the cable.
Just thought of something, would installing Windows XP Mode under a Windows Virtual PC recognize new devices or just feed from the Windows 7 library?
Sal
saldman said:
Well, got ADB installed and running. Set the path and ran it. Plug the tab with debugging clicked on, and got "MTP connected" on the tab's screen. At this point I am excited since I never seen the "MTP connected " on debug mode. I typed the "adb devices" command and got "List of devices attached" ___________________.
Yep, blank. Obviously the pc is not seeing it. My conclusions are the following:
1. Bad cable
2. Bad device
The fact that it recognized once on my room mates' pc and then none at all, and the fact that it was recognized on my pc for a brief random time, then it means that the device can't handshake with the motherboard and thus is a communication issue.
I'll try my luck with Samsung tech support and see if they can replace the cable.
Just thought of something, would installing Windows XP Mode under a Windows Virtual PC recognize new devices or just feed from the Windows 7 library?
Sal
Click to expand...
Click to collapse
Hmm, that is strange.. I was new to samsungs and when I tried to root it it took me a while because I didn't know that kies installed the drivers. After I installed it though adb devices showed my tab connected...
Sent from my HTC Glacier using Tapatalk
You still haven't tried Odin in download mode though.it could just be a bad flash
Sent from my GT-P6210 using xda premium
crunchie-uk said:
You still haven't tried Odin in download mode though.it could just be a bad flash
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
I placed the tab on download mode and queried it from adb and got nothing. I then queried it via ODIN3 and got no response as well.
I have come to terms that it has to be the device or the USB cable. Just ordered two (yes, two) different type cables to test out the theory. If they don't do it, then I am sending the tab back to Amazon.
It takes about a week to get stuff shipped where I am at so I'll check in later and report.
Sal
Just an update.
I bought a cheap cable from Amazon for $ 3.31 US to test the cable theory and guess what? It worked.
Curse you Samsung for your lack of QC with your cables. I have read throughout most of the forums (not just this one) and it seems that cables for these devices are notoriously finicky.
While on the one hand, I am glad that I got a cable that works, Samsung owes me over thirty hours of my life that I had to spend on troubleshooting a brand new device.
The part that I hate the most is that when I tried to contact Samsung's tech support, all they kept telling me is that it must be my pc even after I told them all the troubleshooting that I had done. Yes, they played the blame game.
My Toshiba Thrive worked right out of the box with a standard micro usb cable.
Ok. Rant off.
Sal
Glad to hear you got it working. Personally I have a ftp server set up on my comp that I use to transfer files back and forth. Much easier IMO than having a cable every time I need something transferred
Sent from my HTC Glacier using Tapatalk
Is it possible to connect my Xoom to PC using USB Mass Storage, not this buggy MTP protocol?
mooop12 said:
Is it possible to connect my Xoom to PC using USB Mass Storage, not this buggy MTP protocol?
Click to expand...
Click to collapse
I'm wondering the same thing ... I didn't notice this until now but on the new 4.0.4 Mass Storage as an option is gone.
I'm running JB ota and MTP is running fine. Actually it's running exceptionally!
Sent from my Razr machine
Well, I don't like it. It doesn't show me real progress of what I'm copying, and it doesn't even refresh all the files, so last time I tried to check something on my xoom I saw only 3 folders of 20, and no amount of refreshing and reconnecting my xoom could fix that.
any updates?
Are there any updates in this?
I have lost all my pictures (8gb) while working with this silly MTP mode.
Went through unlocking and rooting my device (which was quite the challenge), tried to use some recovery apps without any success... The USB Mass Storage Watcher app from Skidmrk doesnt get me mass storage mode... (I'm not allowed to post a link to it.)
I just want to get it connected via mass storage, so that I can scan it with recuva!!!
You might need to download USB driver for Motorola Xoom from Motorola site. Just Google for it.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Sent from my Nexus 4 using xda app-developers app
You just need to keep the screen Always ON an password unlocked and don't touch the tablet (since its ROM) while on USB on PC it should work fine.
mooop12 said:
Is it possible to connect my Xoom to PC using USB Mass Storage, not this buggy MTP protocol?
Click to expand...
Click to collapse
I do not try this.
DavilaDarkness said:
You just need to keep the screen Always ON an password unlocked and don't touch the tablet (since its ROM) while on USB on PC it should work fine.
Click to expand...
Click to collapse
Good to know for further reference... Only: How exactly do you keep the screen on without touching the phone? The max screen timeout setting I can see is 30 minutes...
thx
The for this topic really informative
I seriously hope I'm wrong about this. Connecting my phone to a computer with the USB cable no longer brings up the selection screen. Instead, it automatically turns on USB debugging. This makes it impossible to transfer files from phone to computer via USB. (This is true on Mac and Linux PCs with the newest HTC drivers.)
How am I supposed to get these ROM files onto the phone from my PC? Am I missing something?
No, JB uses the MTP crap instead. How are you going to transfer files? Well, in windows it still shows up as a drive. But you can also use adb to transfer files (which is usually faster than the MTP crap)
JohnHenrySDM said:
I seriously hope I'm wrong about this. Connecting my phone to a computer with the USB cable no longer brings up the selection screen. Instead, it automatically turns on USB debugging. This makes it impossible to transfer files from phone to computer via USB. (This is true on Mac and Linux PCs with the newest HTC drivers.)
How am I supposed to get these ROM files onto the phone from my PC? Am I missing something?
Click to expand...
Click to collapse
It should automatically pick it up on your pc that's what it should do now instead of a selection screen and usb debugging isn't enabled automatically you have to enable it in the settings under development in settings...... But yea that's what's changed in JB but your phone pc should pick it up and it should say HTC one s now instead of removable disk
Sent from my HTC One S
So is this the end of UMS for good? It's ridiculous! There are so many devices that use Mass storage Still. I can't use my phone with my Car stereo as it only has a USB port! I don't understand why google has ditched it in favor of MTP? It's slow to copy files, doesn't generate thumbnails on pictures and most of the time it crashes when copying large files!
---------- Post added at 08:42 PM ---------- Previous post was at 08:28 PM ----------
Anyone know if there a ROM available with UMS working?
Google hasnt ditched it afaik. All AOSP roms still runs mass storage-mode. CM10 does it for sure.
Are you running a mac or pc?
Works on CM10
Goatshocker said:
Google hasnt ditched it afaik. All AOSP roms still runs mass storage-mode. CM10 does it for sure.
Click to expand...
Click to collapse
I can confirm that Mass Storage Mode works on CM10. I'm running the nightly from 1/20. I often bounce back between Sense and CM10 and I would this is one of the advantages of CM10, although I'm not sure how much of an advantage.
Nick
Well, MTP is about 10x slower than mass-storage, and 5x slower than ADB.
So if you transfer files often mass-storage is a giant advantage. If you transfer files once in a while ADB is the way to go.
MTP is only usable when theres no other option.
npiper05 said:
I can confirm that Mass Storage Mode works on CM10. I'm running the nightly from 1/20. I often bounce back between Sense and CM10 and I would this is one of the advantages of CM10, although I'm not sure how much of an advantage.
Nick
Click to expand...
Click to collapse
Does CM10 ROM include UMS for Internal storage? Or only SD Card?
Only /sdcard/, its not really possible to mount anything else on the PC.
If you have the need to explore the whole phone, check out quick adb It gives you access to the whole device as long as youre rooted.
I want to move a 10GB file to my computer from another one, but I don't have a pen drive or external HD around... I used to install the USB drivers on my computer, and plugged my tablet into my computer's USB port, it worked like a charm but since I upgraded to JB the drivers are useless now, what do I do?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
You need to buy a USB pen drive or an external HD, or a network cable. The tablet cannot be mounted as USB mass storage device because that mode would need to give full control over the internal storage to the computer, i.e. Android could not run at the same time.
It still works fine I copy large files all the time. Just make sure you have the latest SDK from Google installed and you should get the latest USB drivers then you can use it like a pen drive again.
sbdags said:
It still works fine I copy large files all the time. Just make sure you have the latest SDK from Google installed and you should get the latest USB drivers then you can use it like a pen drive again.
Click to expand...
Click to collapse
As USB mass storage? I don't think so - which filesystem should be unmounted here?. Otherwise please explain in detail how. And if you mean only as MTP device, how do you transfer files > 2 GB?
Ah right yes not as a mass storage device. I never tried anything over about a gig so never thought about that.
Since JB, only MTP(Media Device) and PTP (Camera) protocols are supported. The MTP protocol is achingly slow, not just on the TF700. My SGS3 (supposedly 'faster than the tf700') is equally slow in terms of USB transfer.
I agree that it used to work as a regular Mass Storage Device before JellyBean. Mine always showed up as F:\Asus TF700T. Updated to JB and to my great annoyance, only MTP. (PTP is pointless.)
ICS with Regular took 30 seconds to copy 600MB. JB's MTP requires 5 minutes! On both of my devices.
As for it not showing up, it's not in the list of drives. It should show up below everything else, without a drive letter(!). For me it's below Control Panel and above Shared Documents. (WinXP)
Did you, by any chance, kill the wufdhost.exe process in taskmanager's processes tab? You see, I did. And not a single MTP device would be recognised afterwards. It should A, running in Taskmanager, B, be in C:\WINDOWS\system32 and C, as 'Windows Driver Foundation - User-mode Driver Framework' in services.exe.
I am running the June 19 build of a CyanogenMod based on version 11-20140620-Sultan-skyrocket (Android 4.4.4).
I was working to reorganize my music library and finally dump iTunes. I am experimenting with a new Music Player that requires a USB synch using MTP.
The main reason for the switch from iTunes is that a lot of my Music is Lossless encoded and it just takes up too much room on my phone. I could not find an iTunes synching solution that would transcode those large files to a smaller format during the synch process (unless I go with an iPod / iPhone).
When I switch my phone to MTP mode, the PC (Windows 8.1) does not recognize it. If I switch to Mass Storage (UMS) the phone shows up in the file explorer.
Any suggestions on how to get the MTP working would be appreciated.
Thanks
Go to device manager and look for the the icon with an exclamation mark, with your phone hooked up to usb. Right click on it and update software. Then go to where it says let me pick from a list..... Choose android composite adb interface. It'll ask you if your sure, just say yes.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go to device manager and look for the the icon with an exclamation mark, with your phone hooked up to usb. Right click on it and update software. Then go to where it says let me pick from a list..... Choose android composite adb interface. It'll ask you if your sure, just say yes.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for the slow reply and Thanks for the post. Unfortunately Windows would not let me update the driver in error in the Device Manager. It said it was an unrecognized USB Device and would not browse for additional drivers. I tried every way I could think of to "force" it.
Just to help determine what might be going on, I restored the ATT / Samsung ICS using CWM. Unfortunately I am having similar issues with that. Sometimes the USB connects and sometimes it is unrecognized. I tested the cables and my Windows 8.1 PC with my Galaxy 5 (stock ATT KITKAT) and everything seems to work fine. I guess the micro USB port on my phone must be going bad.
Thanks again
tomcrable said:
Sorry for the slow reply and Thanks for the post. Unfortunately Windows would not let me update the driver in error in the Device Manager. It said it was an unrecognized USB Device and would not browse for additional drivers. I tried every way I could think of to "force" it.
Just to help determine what might be going on, I restored the ATT / Samsung ICS using CWM. Unfortunately I am having similar issues with that. Sometimes the USB connects and sometimes it is unrecognized. I tested the cables and my Windows 8.1 PC with my Galaxy 5 (stock ATT KITKAT) and everything seems to work fine. I guess the micro USB port on my phone must be going bad.
Thanks again
Click to expand...
Click to collapse
if its seen as a mass storage device but not mtp its a driver and/or win8 issue
tomcrable said:
Sorry for the slow reply and Thanks for the post. Unfortunately Windows would not let me update the driver in error in the Device Manager. It said it was an unrecognized USB Device and would not browse for additional drivers. I tried every way I could think of to "force" it.
Just to help determine what might be going on, I restored the ATT / Samsung ICS using CWM. Unfortunately I am having similar issues with that. Sometimes the USB connects and sometimes it is unrecognized. I tested the cables and my Windows 8.1 PC with my Galaxy 5 (stock ATT KITKAT) and everything seems to work fine. I guess the micro USB port on my phone must be going bad.
Thanks again
Click to expand...
Click to collapse
You might try this http://forum.xda-developers.com/showthread.php?p=42022027
Windows 8 can be a pita to get drivers installed
Sent from my Nexus 5 using XDA Free mobile app