Related
=========================================================================================
=== Device: GT-P5100 (Galaxy Tab 2, 10.1", 3G model)
=== Description: Safe stock ODIN image, recovery and root
=== Packaged by: cheatman ( xda - http://forum.xda-developers.com/member.php?u=490310 )
=== Stock ROM version: P5100XWALD7
=== Build date: 07 June 2012
=========================================================================================
Disclaimer: I am not responsible and assume no liability on how this information is used. This package is provided "as is" without any warranty and does not guarantee any fitness for any purpose.
ONLY FOR GT-P5100 (3G model)!!! Do not flash on any other Galaxy Tab 2!!!
Download the ZIP (large, about 600MB) from here:
=> DOWNLOAD FROM HERE (HotFile)
How to use: Read the readme.txt file or this post here.
On to the safe stock restore process:
1. Make sure you have the Samsung device drivers installed before you begin. If you don't, install them from here:
- 64bit: http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
- 32bit: http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
2. Make sure your tablet's battery is at least 30% charged up before you begin.
3. Make sure you have an external microSD inserted in the device, if you also plan on rooting afterwards. Nothing will be erased from the microSD, there is no need to worry about that.
4. Run procedure to flash back the stock ROM from Samsung (Ice Cream Sandwitch 4.0.3 - P5100XWALD7) from the folder "Step1-Stock". STOP HERE FOR PURE STOCK!!!
5. Run procedure to enable ClockworkMod recovery from the folder "Step2-Recovery". This step is OPTIONAL (only if you want a custom recovery). STOP HERE IF YOU DON'T WANT ROOT!!!
6. Run procedure to enable "root" access from the folder "Step3-Root".
7. Done! Enjoy! Profit!
===============================================================
========== Step 1 - Flashing Stock P5100XWALD7 ================
===============================================================
1. Download the file from the link above.
2. Shut down your tab.
3. Disconnect tab from USB and/or power cables.
4. Hold "Power+Volume UP" physical buttons on your tablet to initiate download mode.
5. Press "Volume DOWN" physical button on your tablet to confirm and enter ODIN mode.
6. On your PC, open "Odin3 v1.85.exe"
7. Press "PDA" button in ODIN and select the "PLATFORM_P5100XWALD7_482645_REV02_user_low_ship.tar.md5" file.
8. Press "PHONE" button and select the "MODEM_P5100XXLD7_REV_01_CL1128355.tar.md5" file.
9. Connect your tablet using a USB cable. In ODIN you should see the device "<added>" message appear. If you do not, there is a problem with the Samsung drivers installation.
10. Confirm that only the following options are checked in ODIN: "Auto Reboot", "F. Reset Time", "PDA", "PHONE". DO NOT CHECK RE-PARTITION!!! NEVER!!!
11. Click the big "Start" button and WAIT. Be patient!!! The process takes about 3-4 minutes but can take longer.
12. Do not power down the tablet while this takes place. Do not shut down your PC. Do not touch anything! Just wait! Get a coffee or something...
13. After full flash the tablet will reset automatically.
14. Congratulations you are now safely back to stock P5100XXALD6.
15. There is no need to flash the bootloader and CSC. Do so at your own risk.
===================================================================
========== Step 2 - Flashing ClockworkMod Recovery ================
===================================================================
1. Download the attached recovery file "p5100-recovery.tar.md5.zip" and extract it.
2. Shut down your tab.
3. Disconnect tab from USB and/or power cables.
4. Hold "Power+Volume UP" physical buttons on your tablet to initiate download mode.
5. Press "Volume DOWN" physical button on your tablet to confirm and enter ODIN mode.
6. On your PC, open "Odin3 v1.85.exe"
7. Press "PDA" button in ODIN and select the "p5100-recovery.tar.md5" file.
8. Connect your tablet using a USB cable. In ODIN you should see the device "<added>" message appear. If you do not, there is a problem with the Samsung drivers installation.
9. Confirm that only the following options are checked in ODIN: "Auto Reboot", "F. Reset Time", "PDA". DO NOT CHECK RE-PARTITION!!! NEVER!!!
10. Click the big "Start" button and wait a few seconds. Flashing recovery.img is super-fast!
11. After recovery flash, the tablet will reset automatically.
12. Congratulations you are now running recovery for your tablet.
13. Note: Internal SD is not working with this recovery, you must use external microSD cards to load up ZIPs.
14. You can also download and extract the kernel and flash it also on "PDA" if you want a rooted Kernel
=========================================================
========== Step 3 - Enabling root access ================
=========================================================
1. Download the attached file "CWM-root-P5100-v1.zip".
2. Copy the "CWM-root-P5100-v1.zip" file to the external microSD card.
3. Shut down your tab.
4. Insert the microSD in the tablet.
5. Hold "Power+Volume DOWN" physical buttons on your tablet to initiate recovery mode. It takes a while to start up recovery (10-15 seconds) so be patient. Try not to press too hard on the buttons as it does not help at all (takes same amount of time :-D)
6. Use the "Volume UP" and "Volume DOWN" buttons to navigate (select options) and the "Power" button to select. Don't HOLD the buttons, just press them (like a click or something).
7. Select the option to install ZIP from sdcard.
8. Navigate to where you copied the "CWM-root-P5100-v1.zip" file and select it.
9. Wait for the operation to complete.
10. Navigate back and select option to "Reboot system"
11. Congratulations you have a fresh stock ROM with CWM and root ready to go!
12. Enjoy
=======================================================================================
Thanks and greetings go to:
- Galaxian-Soup
- nycbjr
- All others who help and bring value to the XDA comunity!
Peace and have fun!
C.
Reserved!
Looking for mirrors. This is a very large file!
Thanks.
Ah damnit lol this was almost what i was looking for. I need the one for the wifi version.
Do you think the recovery would be the same? Thats the only part i really need lol.
Nvmind i see its all in one file lol
Recovery is in an independent folder, you don't flash the initial zip lol.
Anyway, the recovery and root steps should apply to p5110 as well.
Cheers,
C.
Thank you for all the hard work. I'm sure my Willy nilly ways will require me to use this
Sent from a note on fire in the middle of the sea
Hi,
I see that in your instructions for flashin stock do not use file "BOOTLOADER_P5100XXALD6_365113_REV02_user_low_ship. tar.md5" which is otherwise included in the package, does that mean that it did not necessarily use one?
When it is necessary to use that file?
Thanks.
Updating the bootloader is not required.
Playing with bootloaders is very risky and dangerous in general (can permanently brick tab).
Bootloader is responsible for the download mode. If you can access it and flash using odin, there is no need to mess with it. Upgrading it may result in a locked boot mode, meaning you can't flash custom stuff anymore.
I included only the required files and steps so you guys don't have to look for the right combination.
Peace,
C.
Thank you for the file sir oh sir.
Rapidshare mirror
Sized at 492.65MB, i recompressed the file using 7-zip to cut off the size a bit. It is below 500MB, meaning it's Dev Host friendly.
Code:
stock-safe-p5100-4.0.3-v1.zip 2E5566F2311BAD666A8CFD9674AEE0A5
stock-safe-p5100-4.0.3-v1.7z 946AAC1EDE408FFCA48BAF592AC3F92C
Step1-Stock
MODEM_P5100XXLD6_REV_01_CL1128355.tar.md5 07EFC235DC6989D50C9321076EDCDFC1
PLATFORM_P5100XXALD6_365113_REV02_user_low_ship.tar.md5 8186B1660ED2D4C1752336014ED047FD
Step2-Recovery
recovery.tar.md5 16AFDD2FEDBD8476521D9C144C823023
Step3-Root
CWM-root-P5100-v1 4D2E472F0C0A640F4170B9500F39FCAC
Can someone please confirm the hashs?
I rooted my Galaxy Tab 2 10.1 WiFi GT-P5110 using the manual and it works fine!
Thanks for the manual
Sent from my r00t3d GT- P5110 using XDA Premium App
Updated new version of the stock image.
Thanks for this find go to our friend "zi0m3k" (cheers, mate!)
C.
How did you capture the stock recovery from the device? I would like to do the same from my GT-P5113, but (of course) one has to flash CWM first to get access, and that overwrites the recovery.
Stock recovery comes with the stock ROM, so you need to overwrite it, not capture it.
But, to clarify the issue, you can root your device without a custom recovery. After you root, you can dump system images using the "dd" command.
Rooting using CWM zips is just more convenient and easier for everyone, it's not the only option, though. There was root before recovery...
C.
cheatman said:
Stock recovery comes with the stock ROM, so you need to overwrite it, not capture it.
But, to clarify the issue, you can root your device without a custom recovery. After you root, you can dump system images using the "dd" command.
Rooting using CWM zips is just more convenient and easier for everyone, it's not the only option, though. There was root before recovery...
C.
Click to expand...
Click to collapse
I know that the final goal is to overwrite the recovery to get the benefits of CWM (e.g.). But if you want to save the *stock* recovery first, you need to capture/dump it from the device somehow before flashing (correct me if my logic here is incorrect).
Also, yes, I know a good way to dump it is with "dd", but one needs root to do that (I tried for the hell of it, to see if there was non-root read access, but alas, no).
I think you have hit upon my question regarding root: did you root the tab without flashing CWM? If so that will allow "dd" to capture the stock recovery, yes. If you used CWM, that you overwrote the recovery, and you would not have been able to save the stock recovery in that case.
I have not found a rooting method for the GT-P5113 that does not involve flashing CWM, so I cannot figure out how to same my stock recovery, which I would like to do before flashing CWM (and thereby losing the stock recovery forever).
I obviously dumped the recovery before I flashed CWM, otherwise it wouldn't be stock.
If I get you right, you want to know the root exploit I used to root my p5100 to get suid and be able to copy the "su" binary. In fact, getting elevated rights on a linux system if you have direct access to it is not rocket science. However, because that's a lot to write, here is a more simple solution you can apply to get a stock recovery that I didn't have at the time:
1. Go to samfirmware.com and download a stock rom for your device.
2. Extract the .tar.md5 files and get the "recovery.img" out of them. Usually the "boot" and "platform" files have one inside.
I reckon all p51xx devices have the same recovery anyway, but it might not be the case.
C.
cheatman said:
I obviously dumped the recovery before I flashed CWM, otherwise it wouldn't be stock.
If I get you right, you want to know the root exploit I used to root my p5100 to get suid and be able to copy the "su" binary. In fact, getting elevated rights on a linux system if you have direct access to it is not rocket science. However, because that's a lot to write, here is a more simple solution you can apply to get a stock recovery that I didn't have at the time:
1. Go to samfirmware.com and download a stock rom for your device.
2. Extract the .tar.md5 files and get the "recovery.img" out of them. Usually the "boot" and "platform" files have one inside.
I reckon all p51xx devices have the same recovery anyway, but it might not be the case.
C.
Click to expand...
Click to collapse
Hi, yes, that's exactly right - I wanted to know how you got elevated rights in order to use dd for this.
I really want the recovery image from *my* stock tablet - not one off the net.
Could you private message me, if you are uncomfortable talking about it here. I am well-versed in Linux (I've done kernel development, I'm part of the Gentoo Linux dev team, etc.), so I am no stranger to Linux. I know there are exploits now and then, but they are not usually trivial. If you found a new one for the current kernel, then I'm impressed, and please do tell. If you found the exploit somewhere on the net, can you send me a link?
Thanks, Joe
Well, I must admit I actually took my time thinking whether I should actually write a reply :-D
However, my main concern is having to write a lot to explain stuff, but considering you are a kernel dev, this should be easy peasy. In short, I didn't force my way in, I just *convinced* the system to let me in. It's an inherent problem of Android, in fact:
1. Extracted the boot.img and unpacked it.
2. Replaced the adbd binary in the ramdisk with an unsecure one.
3. Repackaged and flashed using ODIN.
4. Used adb root to get into the system, the *regular* way. Once adbd lets
5. Installed su and superuser.apk.
There is no need to exploit the kernel if the system is inherently flawed when it comes to direct access (adb root exists). Any and all Android devices that use this layout (boot.img) can be rooted this way. Sorry to disappoint you about the exploit, but I am no *real* dev. I just know my way around :-D
PS: You can get the latest boot.img I did for this purpose here
Hope it helps with your recovery dump,
C.
cheatman said:
There is no need to exploit the kernel if the system is inherently flawed when it comes to direct access (adb root exists).
Click to expand...
Click to collapse
Very interesting - that was my missing piece of the puzzle - I had not realized one could replace the adbd. Makes sense. I will certainly give this all a try! I may be experienced with Linux, but I have a lot less background in android internals; learning quickly, though. In fact, my next project (when I get some time) is to try building the GT-P5113 ROM from source (and also some delving into AOSP). Being able to customize at the source level would be very cool.
LavaJoe said:
Very interesting - that was my missing piece of the puzzle - I had not realized one could replace the adbd. Makes sense. I will certainly give this all a try! I may be experienced with Linux, but I have a lot less background in android internals; learning quickly, though. In fact, my next project (when I get some time) is to try building the GT-P5113 ROM from source (and also some delving into AOSP). Being able to customize at the source level would be very cool.
Click to expand...
Click to collapse
I would be eternally grateful if you could post the stock rom for the 5113 (including stock recovery) if you can. I would settle for just the stock recovery in flashable form via odin etc.
A read through Samsung's kernel source reveals that the governors are already coded into the kernel (install voltage control and you can switch between governors and schedulers at will).
It looks like the set stock speed on the 10.1 5113 is 1008MHz.
Does anyone know how/where in the kernel overclocking is programmed?
The source also looks pretty comprehensive for the tablet and apparently is very similar to that of the 7" tab. I imagine it wouldn't be too hard for a veteran coder to fix this up for the 10" users.
I haven't coded in years and I'm not familiar enough with Android to do anything but attempt to compile the source from Samsung.
Hi,
Does this work on P5100XXLD6 ?
Android version 4.0.3
Thanks
Hi all.
I have an Spanish wifi-only Xoom (MZ604) and I'm tired of waiting for motorola's updates (still in Honeycomb 3.2!!!).
I want to test either EOS3 (Android 4.1.1) or EOS2 (Android 4.0.4) custom roms. I've read almost all tutoriales but I still have some doubts about the procedures... could anybody check this message and warn me if I'm going to do something wrong?
DOUBT 1.- Key shortcuts in Xoom
Can anybody tell me the existing key combinations in Xoom? I only know about POWER+VOL_UP key to enter bootloader mode.
DOUBT 2.- How to install CWM.
If I understand it correctly, both EOS2 and EOS3 should be installed from CWM recovery...
Is the following procedure OK?
- Some tutorials say that you have to be root first to install CWM ... is it really needed? Can't be done directly with ADB?
- Install Android SDK in the PC.
- Download eos-recovery-r6.img or eos-recovery-r6-softkeys.img
- Connect XOOM to PC with the original USB cable.
- Reboot XOOM in bootloader mode (Power + VolUp)
- Exec adb and then:
fastboot oem unlock <---- is this a requirement?
fastboot flash recovery eos-recovery-r6.img
fastboot reboot
DOUBT 3.- How to install or upgrade EOS 2 or 3 ROM?
Is the following procedure OK?
- Download ROM and gapps zip files.
- Start XOOM in recovery mode (CWM) -> How to do this?
- Do a nandroid backup.
- Wipe everything (data, cache, dalvik, etc)
- Install ROM zip.
- Install gapps zip.
- No need to do anything to root it, the rom is already rooted <-- is that right?
- Reboot
Is everything OK? Did I miss anything? Do I need to root my 3.2 install before any other step? Do I have to do the "oen unlock"?
Thanks.
All you need to do is unlock your boot loader and get into flashing eos3. Will give you details how to soon
Sent from my MZ601 using Tapatalk 2
wesamothman said:
All you need to do is unlock your boot loader and get into flashing eos3. Will give you details how to soon
Click to expand...
Click to collapse
Thanks for answering. If I'm understanding you correctly, you say that I don't need CWM and I can just flash the EOS ROM directly to my xoom without "applying" it as a zip in CWM...
I would really like to install CWM, I appreciate a lot the possibility to do "nandroid" backups to be able to go back before installing kernels, updates or so ...
NoP_Compiler said:
Thanks for answering. If I'm understanding you correctly, you say that I don't need CWM and I can just flash the EOS ROM directly to my xoom without "applying" it as a zip in CWM...
I would really like to install CWM, I appreciate a lot the possibility to do "nandroid" backups to be able to go back before installing kernels, updates or so ...
Click to expand...
Click to collapse
Since you are going to install EOS Jellybean, I don't advise you with CWM. A different recovery made by EOS team is better through which you can do nandroid backup and other stuff...
Here is what you need to do step by step...
Note: please read this procedure carefully more than once until you are fully aware of it. If you have any doubts or concerns, just ask to avoid confusion before you apply. This should be followed step by step.
To summarize:
First, download the above ROM and GAPPs and put them onto your xoom internal and external SD card. Put them under /mnt/sdcard for internal sd or somewhere accessible, and under the root of your external sd card.
To download:
• Get the Motorola USB drivers to your laptop: http://developer.motorola.com/docstools/USB_Drivers/
• Get the Android SDK to your laptop: http://developer.android.com/sdk/index.html
• Recovery Image: http://goo.im/devs/teameos/recoveries/wingray/eos-recovery-r6.img
• GAPPS: http://goo.im/devs/teameos/roms/eos3/gapps/gapps-jb-20120726-eos-signed.zip
• ROM: http://goo.im/devs/teameos/roms/eos3/nightlies/wingray/ ; get the latest one...
Steps:
1. Power off your XOOM device.
2. Press and hold the volume down button while pressing the power button at the same time. Note: Even if your xoom starts again, just keep the button pressed until you see "Starting fastboot protocol" on the screen.
3. Connect Xoom to your computer via USB.
4. Open a ‘Command Prompt’ or ‘Terminal’ window on your computer in your sdk/tools folder. This is the sdk you downloaded above.
5. unlock your xoom and flash the recovery image. The recovery image should be in your current working directory where you have command line navigated to: Type:
adb reboot bootloader
fastboot oem unlock
fastboot flash recovery eos-recovery-r6.img
fastboot reboot
adb reboot recovery
Now, you have your device unlocked and recovery installed.
Reboot your xoom by selecting the option "reboot system now" from recovery. you can navigate up and down using the volume buttons. Once an option is highlighted, press the power button to select, you will still have your old ROM.
To flash the other ROM downloaded above,
1. Boot into recovery by:
i. As soon as you hit the reboot command above, you should see a Motorola logo appear. Wait 3 seconds and tap the Volume down button and the words Android Recovery should appear on the screen. When you see that, tap the Volume up button and you’ll boot into recovery.
2. From within Recovery, perform wipe data, wipe cache, and go to advanced, wipe dalvik cache and battery stats. Don't worry, if the ROM and GAPPs are deleted, which should not be the case, you will have them on your external sd card
Note: wipe data will delete your stuff on the xoom. It would be great if you backup your files that you need to your external sd card before you start any of this procedure.
3. In recovery, navigate to install zip from sdcard > choose zip from sd card and select the EOS ROM you copied to the root of the SD card. Once the files are flashed, DO NOT reboot afterwards. Hold on.
4. Again, from Recovery, choose install zip from sdcard > choose zip from sd card and select the GAPPs you copied to the root of the SD card.
Then hit reboot system now. It will take 2 - 3 minutes for the first reboot. Setup your google account. and you are good to go.
Later reboots will be much faster (around 30 - 45 seconds). The more apps you install, the slower it boots...
That is pretty much it. Enjoy, I hope this helps you
Of course it helps! In fact, a lot.
When I was talking about CRW I really meant EOS recovery (which is based in CRW itself IIRC).
The only that I can't understand is why some tutorials ask me to root the tablet before doing all this process...
Anyway, I think I'm finally going with EOS3 + EOS recovery if nobody here advices me to flash EOS 2 instead...
Sent from my Samsung Galaxy S2 using Tapatalk Pro.
So, before flashing:
- Do you think EOS3 (JB in Xoom) is mature enough to use it, or I should go with EOS2 final (ICS)?
- Do you know of anything not working in a wifi xoom with EOS3 rel.127?
- I've downloaded eos6-recovery.img ... do you think I should flash the "soft-keys" or the rogue-recovery instead?
- I don't have Microsoft Windows in my laptop: I work under Linux, so I haven't downloaded Motorola's USB drivers... I imagine that they are not needed under Linux, and It will work just with SDK's "adb" and "fastboot", right?
- Can the device be bricked with this procedure, or there is always a "Power+VolKey" way to flash a stock image? (like galaxys2 that its almost unbrickable).
PS: Thanks for informing me in the other thread that the EOS rom comes already rooted
I will be away for couple of hours, will answer your questions all as soon as I get back...
Sent from my MZ601 using Tapatalk 2
NoP_Compiler said:
So, before flashing:
- Do you think EOS3 (JB in Xoom) is mature enough to use it, or I should go with EOS2 final (ICS)?
- Do you know of anything not working in a wifi xoom with EOS3 rel.127?
- I've downloaded eos6-recovery.img ... do you think I should flash the "soft-keys" or the rogue-recovery instead?
- I don't have Microsoft Windows in my laptop: I work under Linux, so I haven't downloaded Motorola's USB drivers... I imagine that they are not needed under Linux, and It will work just with SDK's "adb" and "fastboot", right?
- Can the device be bricked with this procedure, or there is always a "Power+VolKey" way to flash a stock image? (like galaxys2 that its almost unbrickable).
PS: Thanks for informing me in the other thread that the EOS rom comes already rooted
Click to expand...
Click to collapse
Alright, eos jelly bean is fully stable, ,such faster and smoother than ICS. You want feel the difference until you try it... however, eos ICS is stable too and has more features and addons by eos because it has been there under dev for longer time, jellybean is new, one month old only... I recommend you to go for jellybean, and try and see for yourself. At anytime you can flash ICS since your Xoom booloader is already unlooked and recovery installed, you can do that by just wiping data and flash ICS zip. That is as simple as that...
For Motorola drivers on Linux, I think it is not needed, adb is built in with Linux, but I am not sure as I haven't tried that yet.
For eos recovery, don't use the soft key version, use the normal one...
with this recovery, you will be safe, because at all times, your external SD is accessible in emergencies...
Hope that helps...
Sent from my MZ601 using Tapatalk 2
You have it down perfectly. Just to recap.
1. Set up android sdk. Download recovery image and store in sdk folder. Download rom/gapps and store on tablet.
2. Boot into fastboot (power + volume up).
3. fastboot oem unlock (required). This will wipe all data.
4. fastboot flash recovery recovery.img (whatever recovery you decide to go with, I recommend eos soft key).
5. boot into recovery, make nandroid backup, flash rom of your choice + gapps if necessary.
People tie rooting to flashing custom roms because many people have become so reliant on apps like rom manager that flash the recovery for you, an app that requires root access. I never rooted my galaxy nexus or xoom. I simply flashed recoveries in fastboot and proceeded to flash roms in recovery.
It actually bothers me how some have become so reliant on root access to flash roms. It has gotten to a point where many people genuinely don't know the difference and that, to me, says they don't really understand what it is they're doing, which will lead to issues should they ever need to troubleshoot.
You seem to have it down well though. Good luck.
Thanks a lot to both.
I'm still waiting for JDK to download for Android SDK to work (I'm on hollydays in a small house in the middle of the forest and Im connecting with GPRS via tethering...).
I'll inform about the results...
Sent from my Samsung Galaxy S2 using Tapatalk Pro.
Good luck...
Sent from my MZ601 using Tapatalk 2
Ok. EOS6-RECOVERY installed correctly. There are a couple of mistakes and some missing info in the "tutorial", so I'm going to change it to help future users:
I finally did it under Windows because almost all tutorials in Internet explain all the possible problems that you can find in Windows, and it's a "too risky" task for me to "experiment" by myself.
PART 1 .- HOW TO INSTALL EOS6 RECOVERY:
Originally quoted from wesamothman:
First, download the above ROM and GAPPs and put them onto your xoom external SD card. Put them in a folder called /sources/ of your external sd card.
- Get the Motorola USB drivers to your laptop: http://developer.motorola.com/docstools/USB_Drivers/
- Get the Android SDK to your laptop: http://developer.android.com/sdk/index.html
- GAPPS: http://goo.im/devs/teameos/roms/eos3/gapps/gapps-jb-20120726-eos-signed.zip
- ROM: http://goo.im/devs/teameos/roms/eos3/nightlies/wingray/ ; get the latest one...
And the most important:
- Recovery Image: http://goo.im/devs/teameos/recoveries/wingray/eos-recovery-r6.img
Check that the md5sum of this file is correct and matches with the one provided in the download page. This is the most important file because it will allow to install the CWM recovery system and it's CRITICAL that the file is not corrupted.
Steps:
a.- Install in your PC the lastest JavaSE JDK from Oracle's website.
b.- Install in yout PC Android SDK, open Windows' cmd, enter the android-sdk folder and run:
Code:
tools\android.bat update sdk
Now select "Android SDK Tools", "Android SDK platform-tools", and Extras/"Google USB Driver". Click on "Install packages".
c.- Enable USB debugging in the XOOM (in settings, development).
d.- Install the Motorola USB drivers for your laptop (32 or 64 bits, check it in the Windows system properties).
e.- Plug the Xoom to your laptop.
f.- Execute cmd and enter the android-sdk/platform-tools folder.
Run "adb devices", if you get an empty "List of devices attached", then you must enter the control-panel -> devices and "Fix problem with device" over the MZ60x device. After a While, Windows will fix it and "adb devices" will show a message like:
Code:
List of devices attached
037887sda897xz device
(the digits string will vary according to your device)
NO NEED TO DO THIS:
NO -> 1. Power off your XOOM device.
NO -> 2. Press and hold the volume down button while pressing the power button at the same time. Note: Even if your xoom starts again, just keep the button pressed until you see "Starting fastboot protocol" on the screen.
Because the first command show after this lines: (adb reboot bootloader) won't work while in fastboot. Only "fastboot" commands work in fastboot mode. If you try that command in fastboot mode, it will say "Error: device not found".
So just, with your xoom working under the Android OS, do:
Code:
adb reboot bootloader
With the above, you'll enter fastboot mode without needing to press any key in the startup.
Now your Xoom will show the Motorola logo and the words "Fastboot protocol...". If you need to stop now for any reason, you can abandon this mode safely and reboot the tablet with "Power+VolUP+VolDown" for a few seconds.
But let's continue.... If you now do:
Code:
fastboot devices
You should get a string like
Code:
List of devices attached
037887sda897xz fastboot
If you don't see that string (and you see and error about device not found), you have to "fix/repair" the usb drivers again in the Windows ControlPanel / Devices. Now you'll see a "FASTBOOT" device instead of the MZ60x you repaired before (that's why we have to repair/fix again the device, because WIndows see it as a different device while in fastboot mode).
After repairing it, unplug and plug the USB cable (still in fastboot mode) and repeat the command:
Code:
fastboot devices
Now it will work and you'll see the device recognized by "fastboot"
Issue the following command to unlock the Xoom (you'll void the warranty):
Code:
fastboot oem unlock
Follow the Xoom's onscreen instructions to unlock the bootloader. You have to use VolDown to move through options and VolUP to accept an option.
The xoom will reboot and your old android OS will show, but now with a factory reset. Select language, time, etc and enable again USB debugging and execute in the PC:
Code:
adb reboot bootloader
(to start again the tablet in fastboot mode)
Now copy the file eos-recovery-r6.img to the android-sdk/platform-tools/ folder and execute:
Code:
fastboot flash recovery eos-recovery-r6.img
You will see something like:
Code:
C:\Users\sromero\Desktop\android-sdk-windows\platform-tools>
fastboot flash recovery eos-recovery-r6.img
sending 'recovery' (4114 KB)...
OKAY [ 0.499s]
writing 'recovery'...
OKAY [ 1.014s]
finished. total time: 1.529s
Check in the xoom's screen that the file was correctly written and execute:
Code:
fastboot reboot
You xoom will start again in Android OS mode. Execute:
Code:
adb reboot recovery
And you'll start the nice EOS Recovery (based on Clockworld Mod) recovery system.
You can also do it manually by powering on the Xoom and when the motorola logo appears, wait 3 seconds and press VolUp.
Now, you have your device unlocked and recovery installed. Now, you are SAFE because you can do nandroid backups and restores and can put any ROM in your system and go back with a backup or flash another different rom.
PART 2 .- HOW TO USE CWM / EOS RECOVERY
Code:
Up -> VolumeUp button
Down -> VolumeDown button
Select -> POWER button
PART 3 .- HOW TO INSTALL EOS3 ROM:
Under recovery mode (abd reboot recovery), do:
- Backup/restore -> backup to external SD.
- Wipe data/factory reset
- Wipe cache
- Advanced -> Wipe Dalvik Cache
- Advanced -> Wipe Battery Stats
- Install ZIP from SDCARD -> /sources/ -> the eos3 rom .zip file.
- Install ZIP from SDCARD -> /sources/ -> the gapps .zip file.
- Reboot
- Enjoy your new rom!
Very well detailed... great...thx.
Sent from my MZ601 using Tapatalk 2
wesamothman said:
Very well detailed... great...thx.
Click to expand...
Click to collapse
No... thank you for the initial info
After restarting, I have a notification about a ROM update (128). The ROM-management app allows me to download it or apply a incremental update...
Do you know if that second option (incremental update) is safe?
Anyway, I can just always do a Nandroid and test it ... having CWM I can't loose never anything, right?
Of course it is safe, I use it a lot. Just boot into recovery now by long press on power menu, select reboot, recovery,
First download build128. It will be under /storage/sdcard0/goo manager.
From recovery, wipe cache, dalvik, flash build 128, and reboot,
FYI, this latest build has theme engine now
Sent from my MZ601 using Tapatalk 2
wesamothman said:
First download build128. It will be under /storage/sdcard0/goo manager.
From recovery, wipe cache, dalvik, flash build 128, and reboot,
FYI, this latest build has theme engine now
Click to expand...
Click to collapse
So, the incremental update has to be flashed from recovery too?
I'll try it after a few days, when people confirms that it has not any major bug...
Thanks.
NoP_Compiler said:
Thanks a lot to both.
I'm still waiting for JDK to download for Android SDK to work (I'm on hollydays in a small house in the middle of the forest and Im connecting with GPRS via tethering...).
I'll inform about the results...
Sent from my Samsung Galaxy S2 using Tapatalk Pro.
Click to expand...
Click to collapse
Worth noting that to use fastboot and stuff, you only really need to install the Android SDK Platform-tools, maybe the regular SDK tools as well, I can't remember.
You don't need to install all the other stuff.
---------- Post added at 08:02 AM ---------- Previous post was at 08:01 AM ----------
NoP_Compiler said:
So, the incremental update has to be flashed from recovery too?
I'll try it after a few days, when people confirms that it has not any major bug...
Thanks.
Click to expand...
Click to collapse
Yes, any updates/mods/gapps updates need to be flashed in recovery.
Unless specified that its necessary by devs though, you don't need to wipe anything. I've been on JB nightlies from day 1 and I haven't wiped cache or anything since the initial wipe.
Is it possible to...
a.- change the system font (too 'light' in my xoom).
b.- disable jellybean UI animations...
?
I don't know about question a, though I'm sure its possible.
As for question b, try a different launcher. Apex launcher and nova launcher are both popular Android 4.0+ launchers (check play store for them).
Eos ROM,m settings, developer options, disable animations and transitions
Sent from my MZ601 using Tapatalk 2
Hi all.
A few days ago I entered the Xoom forum asking about how to modify an "unaltered" Spanish/European Xoom (Wifi Only, MZ604) running stock Android Honeycomb (3.2) and flash a custom ROM with Android 4.1.1 (JellyBean), so that I don't have to wait Motorola to release the updates (still in Honeycomb in Europe, while in US they're enjoying JB), and to enjoy the extras that custom ROMs offer (root, overclocking, etc).
Xda users "wesamothman" and "Cubanluke88" answered quickly to my question and this allowed me to unlock my Xoom bootloader, install TWRP Recovery and flash EOS3 ROM (JellyBean for Xoom from TEAM EOS). The results are awesome; the change from Honeycomb to Jellybean, plus the totally stable overclocking at 1.2 and even 1.4 Ghz is worth the fact that you void the Xoom warranty by doing this procedure. It's like having a brand new tablet.
As I found some problems/mistakes in the procedure I was given, I've created a new "Guide for Noobs" (based on wesamothman's) so that anybody can reproduce the same steps and convert an European Xoom (Wifi Model, MZ604) into a modern EOS3-powered Xoom.
NOTE: I initially wrote this tutorial using the EOS-RECOVERY-6.IMG as the CWM Recovery software to install in the Recovery Partition. The recommended recovery software now is TWRP so I've updated the tutorial replacing the download links and filename.img to flash. The procedure remains the same, although I really tested and executed it with eos-recovery-6, not with TWRP. Anyway, it is supposed to be flashed and work the same way than I initially described it.
NOTE THAT THIS PROCEDURE IS FOR EOS3 - (EOS NIGHTLY <= v155).
EOS4 (nightly >= v156) requires a slightly different procedure!!!
Please, remember that by unlocking the bootloader (and flashing non official software) you're voiding the device warranty and that I'm not responsible of any damage that your device can suffer. I'm just explaining how I did the unlocking+flashing to convert my SLOW XOOM in a fully working JellyBean system. Remember also that this procedure is for WIFI ONLY Xooms. 3g xooms need a different rom/procedure.
So, sumarizing, that's what we are going to do:
a.- Unlock the "bootloader" of the Motorola Xoom so that we can "install" custom software in both the "recovery" and the "data" partitions. Please notice that by unlocking the bootloader you void the device warranty.
b.- Flash TWRP software into the recovery partition, (I was flashing EOS-Recovery-v6 software initially but now is deprecated and TWRP must be used) so that we can launch this software pressing a combination of keys during power-on. This software will allow us to make full backup/restore of the device memory, and to install any ROM (EOS2, EOS3, cyanogenmod, EDGE, etc) in the system. Thanks to this recovery we are safe against problems in the O.S. (even if we break it), because we can always recover from backup or flash a new ROM (including the "stock" ROM, I mean, the ROM shipped oficially with the device) and solve the situation.
c.- Once recovery is installed, do a NANDROID backup of the NAND of our device, to have a copy of the "stock" system.
d.- From Recovery, flash the desired ROM (EOS3 in my case) and the Google Apps applications (they can't be included inside the ROM for legal reasons, so they are flashed separately) to the "data" particion.
e.- Restart and enjoy our new system (you can also made another NANDROID backup to save this "working point" for the future).
Steps a). and b). need a working computer with Linux, Windows or Mac. After doing b).- you can do everything from the Xoom itself and you don't need the computer anymore. After doing b)., you'll be able to download ROM images directly under your Xoom in the uSD card and reflash any new ROM directly rebooting the tablet into recovery-mode.
Steps a) and b) can be done from Linux, Windows and Mac. Although I have Linux in my laptop, I found that almost all the tutorials in Internet explain the procedure under Windows so I installed temporary a Windows system to do the "PC dependant" steps, because I didn't want to experiment with the "risky" actions in both steps.
So, let's start with the "PC dependant" actions, which includes steps a). and b).
I'll try to update the thread with screenshots in the future, as I didn't take photos/screenshots of the procedure, I'll check images.google.com to find something that fits the text, and add the later to the tutorial if they are really needed.
PART 1 .- HOW TO INSTALL TWRP RECOVERY:
Here we are going to unlock our Xoom and install a custom recovery software into the recovery partition. The recovery software is launched when you start your Xoom in recovery mode, and this is achieved by pushing Power, VolUP and VolDown key combinations when you power-on the tablet (we'll see how later).
So we'll replace the original "recovery" software by a custom one that allows us to flash NON OFFICIAL software to the data partition.
To do that, first we have to download all the required software in the Xoom enternal uSD card and prepare our PC system to recognize and work with the Xoom. We have to download:
Get the Motorola USB drivers for your system: http://developer.motorola.com/docstools/USB_Drivers/ . This step is only needed under Windows, so that the Windows System recognizes the Xoom and the Android SDK binaries (adb and fastboot) can send data to the tablet. Check that you're downloading the right drivers (32 or 64 bits) for your 32 or 64 bits System, and install them. If the Android SDK in your Linux system can recognize the Xoom, you're ready to use Linux also to do the following steps.
Download and Install in your PC the lastest JavaSE JDK from Oracle's website: http://www.oracle.com/technetwork/java/javase/downloads/index.html.
Download and install the Android SDK for your system: http://developer.android.com/sdk/index.html .
Download the EOS v155 ROM and GoogleAPPS for that version. My final choose was EOS3 ROM Wingray (Jellybean for Xoom), and installed v155 from the nightly compilations (which is the latest nightly in Android 4.1, being v156+ Android 4.2). "Nightly" means that as the software is still not "final version" (it's still in development) a new version is released almost everyday, correcting bugs or adding new features. I personally didn't found any bug in v155 but you can check the EOS3 thread in XDA to check that the latest version has no bugs reported by people in that thread.
ROM: http://goo.im/devs/teameos/roms/eos3/nightlies/wingray/ (as of date September-2012 - I recommend v141 )
GAPPS: Latest: http://teameos.org/gapps/wingray (I used http://goo.im/devs/teameos/roms/eos3/gapps/gapps-jb-20120802-eos-signed.zip for v155).
EOS3 THREAD: http://forum.xda-developers.com/showthread.php?t=1764751
And the most important, download TWRP the "recovery software" that will allow you to work without the need of the PC (I was using Team Eos Recovery 6 initially, but now is deprecated and TWRP must be used):
Team Win Recovery Project 2.x, (TWRP): http://forum.xda-developers.com/showthread.php?t=1782235
You should download the IMG file (example: R.A.H.v3_TWRPv2.5.0.img). Check that the size of the downloaded file matches the size that is shown in the above link. This is the most important file because it will allow to install the recovery system and it's CRITICAL that the file is not corrupted..
Steps:
a.- Install in your PC the Android SDK, open Windows' cmd, enter the android-sdk folder and run:
Code:
tools\android.bat update sdk
Now select "Android SDK Tools", "Android SDK platform-tools", and Extras/"Google USB Driver". Click on "Install packages".
This will download and install the packages needed so that we can access the Xoom from the PC for "flashing" data purposes; mainly "adb" and "fastboot". Adb allows us to work with the xoom started in the Android System, and fastboot allows us to work with the xoom started in fastboot mode, which is the mode we'll use to "flash" the recovery software.
b.- Enable USB debugging in the XOOM (in settings, development), so that we can use adb with the tablet.
c.- Install the Motorola USB drivers for your laptop (32 or 64 bits, check it in the Windows system properties).
d.- Plug the Xoom to your PC.
e.- Execute cmd and enter the android-sdk/platform-tools folder.
Run "adb devices". You should see that the system identifies your Xoom with a long numbers+letters string. If you get an empty "List of devices attached", then you must enter the control-panel -> devices and "Fix problem with device" over the MZ60x device, so that the system can bind the right USB drivers we installed to that concrete device.
After a While, Windows will fix it and re-executing "adb devices" will show a message like:
Code:
List of devices attached
037887sda897xz device
(the digits string will vary according to your device)
Now, with your xoom working under the Android OS, do:
Code:
adb reboot bootloader
With the above, you'll enter fastboot mode without needing to press any key in the startup. Fastboot mode is a special bootmode in the xoom that allows the PC to send data to the Xoom and "write" to Recovery and Data partitions. You can also enter that mode starting the Xoom with "Power+Volume Up" pressed simultaneously.
Now your Xoom will show the Motorola logo and the words "Fastboot protocol...". If you need to stop now for any reason, you can abandon this mode safely and reboot the tablet with "Power+VolUP+VolDown" for a few seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Photo: fastboot mode, taken from google images)
But let's continue.... If you now do:
Code:
fastboot devices
You should get a string like
Code:
List of devices attached
037887sda897xz fastboot
If you don't see that string (and you see and error about device not found), you have to "fix/repair" the usb drivers again in the Windows ControlPanel / Devices. Now you'll see a "FASTBOOT" device instead of the MZ60x you repaired before (that's why we have to repair/fix again the device, because Windows see it as a different device while in fastboot mode).
After repairing it, unplug and plug the USB cable (still in fastboot mode) and repeat the command:
Code:
fastboot devices
Now it will work and you'll see the device recognized by "fastboot".
Issue the following command to unlock the Xoom (you'll void the warranty). If you don't unlock the xoom, data and recovery partitions will be "read only" and you can't send the "new software" to them.
Code:
fastboot oem unlock
Follow the Xoom's onscreen instructions to unlock the bootloader. You have to use VolDown to move through options and VolUP to accept an option. The device will ask you twice if you are sure that you want to unlock the device and void the warranty, and then it will make a "factory reset" of the O.S. .
The xoom will reboot and your old android OS will show, but now with a factory reset. Select language, time, etc. Enable again "USB debugging" and execute in the PC:
Code:
adb reboot bootloader
(to start again the tablet in fastboot mode)
Now copy the recovery file (the name may vary, with something like R.A.H.v3_TWRPv2.5.0.img) to the android-sdk/platform-tools/ folder with name "recovery.img" and execute:
Code:
fastboot flash recovery recovery.img
You will see something like:
Code:
C:\Users\sromero\Desktop\android-sdk-windows\platform-tools>
fastboot flash recovery recovery.img
sending 'recovery' (XXXXX KB)...
OKAY [ 0.499s]
writing 'recovery'...
OKAY [ 1.014s]
finished. total time: 1.529s
Check in the xoom's screen that the file was correctly written and execute:
Code:
fastboot reboot
Now disconnect the USB cable and enter recovery mode with:
- When the Motorola logo appears, tap Volume Down (not press, tap) repeteadly until "Android Recovery" is displayed in the screen.
- In this moment, pressing Volume Up will send you to Recovery Mode.
- If you press by mistake again Volume Down, you'll enter DRS mode. You can leave it with VolUP+VolDown+Power and try again (Xoom is powered off).
And you'll start the TWRP Recovery recovery system. If you see the standard Android recovery system instead of TWRP recovery, you can repeat the above "fastboot flash recovery recovery.img". You don't have to unlock the bootloader again, just flash the recovery software and reboot again in recovery mode with "fastboot reboot" and "adb reboot recovery".
(Photo: my Xoom in EOS6 recovery mode, TWRP is different, with better controls and more features )
You can start recovery mode also manually by powering on the Xoom and when the motorola logo appears, wait 3 seconds and press VolUp.
Now, you have your device unlocked and recovery installed. Now, you are SAFE because you can do nandroid backups and restores and can put any ROM in your system and go back with a backup or flash another different rom.
PART 2 .- HOW TO USE TWRP RECOVERY
How to enter in recovery mode:
A.- Manually:
- Turn Xoom off.
- Press Power to turn Xoom on.
- When the Motorola logo appears, tap Volume Down (not press, tap) repeteadly until "Android Recovery" is displayed in the screen.
- In this moment, pressing Volume Up will send you to Recovery Mode.
- If you press by mistake again Volume Down, you'll enter DRS mode. You can leave it with VolUP+VolDown+Power and try again (Xoom is powered off).
b.- From "adb" in a PC system with Android running on the tablet connected to that PC:
Executing "adb reboot recovery"
c.- With a custom ROM, selecting "reboot" will ask you if you want a normal reboot or a recovery-reboot.
How to use recovery mode:
Use the Volume Up and Volume Down keys to move between options and Power button to select an Option:
Code:
Up -> VolumeUp button
Down -> VolumeDown button
Select -> POWER button
Available options for a basic CWM / recovery are:
Reboot system now -> exit Recovery mode.
install zip from sdcard -> allows to install ZIPs to data partitions such as ROMs.
wipe data/factory reset -> delete all the contents in the data partition (needed before flashing a ROM)
wipe cache partition -> delete cache partition.
backup and restore -> allows doing "nandroid" backups and restore of our system (FULL MEMORY BACKUPS).
mounts and storage -> allows to mount aditional media to save/read data.
advanced -> extra options.
(Photo: Nandroid backup)
NOTE: TWRP is newer than the OLD EOS-recovery-6, the above capture and options may differ.
PART 3 .- HOW TO INSTALL EOS3 ROM:
Now we've installed recovery, so we don't need the PC anymore. We can enter in recovery mode at any moment and do backup/restores, flash new roms, flash updates, etc.
To install EOS3 ROM (or any other "full install" -not update- ROM, do):
Start the Xoom in recovery mode.
Backup/restore -> backup the current system to our external SD.
Wipe data/factory reset -> remove partition contents
Wipe cache -> delete the cache
Advanced -> Wipe Dalvik Cache
Advanced -> Wipe Battery Stats
Install ZIP from SDCARD -> /sources/ -> the eos3 rom .zip file.
Install ZIP from SDCARD -> /sources/ -> the gapps .zip file.
Reboot
Install gmail, youtube, etc from Market (not included anymore in gapps).
Enjoy your new rom!
PART 4 .- HOW TO UPDATE EOS3 ROM or install a new different ROM:
Start the Xoom in recovery mode.
Backup/restore -> backup the current system to our external SD.
Wipe data/factory reset -> remove partition contents
Wipe cache -> delete the cache
Advanced -> Wipe Dalvik Cache
Advanced -> Wipe Battery Stats
Install ZIP from SDCARD -> /sources/ -> the new rom .zip file.
Install ZIP from SDCARD -> /sources/ -> the gapps .zip file.
Reboot
Enjoy your new rom!
I hope this can help people to unlock their xooms.
Thanks to "wesamothman" and "Cubanluke88" for the initial support given and specially to EOS Team and the people that created ClockWorkMod for sharing their time, work and knowledge with us. They've converted my "slow xoom" in a very powerfull and fully functional tablet.
Couldn't expect less from you. Super great guide...
Sent from my MZ601 using Tapatalk 2
Post reserved for updates in case the initial post gets too large...
I wish all new Android users would do the level of research the OP did prior to making his initial question thread. We guided you a bit but if I remember right, your first post showed quite well that you had done your homework. If more people committed themselves to understanding what they're doing prior to doing it, I'd imagine there'd be a lot less "bricks" in the android world. Great work dude and nice job entering the forums with a bang.
Sent from my Xoom using Tapatalk 2
Thanks for your words...
In this thread I've tried not only to give a procedure (the forums and lots of websites are full of procedures) but also explain the concepts themselves (oem unlock, adb, fastboot, recovery mode, gapps, etc).
"Give a man a fish and you feed him for a day. Teach a man to fish and you feed him for a lifetime".
Thanks.
--
Sent from my Xoom with EOS3 ROM using Tapatalk 2
Updated with some pictures
Updated with links to v141...
eos 6 recovery.img not available
the recovery image file is not available in the link..could you update the link. Thank You !
Great tutorial
kakrikakri said:
the recovery image file is not available in the link..could you update the link. Thank You !
Great tutorial
Click to expand...
Click to collapse
Hi.
According to this URL, EOS6 RECOVERY.IMG has been deprecated:
http://forum.xda-developers.com/showthread.php?t=1604014
Now you can use Team Win Recovery Project 2.2, (TWRP):
http://forum.xda-developers.com/showthread.php?t=1782235
Flashing is almost similar to EOS6 recovery method described above, just check the last link.
NoP_Compiler said:
Hi.
According to this URL, EOS6 RECOVERY.IMG has been deprecated:
http://forum.xda-developers.com/showthread.php?t=1604014
Now you can use Team Win Recovery Project 2.2, (TWRP):
http://forum.xda-developers.com/showthread.php?t=1782235
Flashing is almost similar to EOS6 recovery method described above, just check the last link.
Click to expand...
Click to collapse
wow that was a quick reply.. THANKS (Y)
kakrikakri said:
wow that was a quick reply.. THANKS (Y)
Click to expand...
Click to collapse
Anyway, I have the eos-recovery-r6.img.zip file in my desktop, I can send you via email if you want to use it instead of TWRP (but you should not, as Team Eos recommends their new recovery system).
I'm going myself to update to TWRP this evening (they have a .zip file that you can flash from an existing recovery like my current "EOS6 recovery").
Same method for stock ics?
Sorry I am a bit paranoid..but will this same unlocking bootloader and flashing recovery method work for stock ics on my xoom?
Thanks !
Help !!! In a lot of trouble
I flashed the twrp recovery and then it rebooted..everything was perfect till that point
then i rebooted into recovery..and when i selected to install zip from usb drive..it said mount to sdcard failed (at this point the roms were downloaded in my internal storage) and it does not detect any zip files.
I tried putting the zip files on a proper micro sdcard and then rebooted into recovery..but still no luck.. it just says it failed to mount sdcard.
Special note:- and btw.. when i reboot into recovery and after pressing the vol up button there is a droid icon on my screen, but no 'recovery' menu shows up.. then i pressed volup+power button, this action popped up the list of menus of the recovery screen... (do u think this might be a problem?)
please help me i am panicking here..is there anyway i can flash a different recovery..like the eos recovery or the cmw?
HELP !!!!
kakrikakri said:
I flashed the twrp recovery and then it rebooted..everything was perfect till that point
then i rebooted into recovery..and when i selected to install zip from usb drive..it said mount to sdcard failed (at this point the roms were downloaded in my internal storage) and it does not detect any zip files.
I tried putting the zip files on a proper micro sdcard and then rebooted into recovery..but still no luck.. it just says it failed to mount sdcard.
Special note:- and btw.. when i reboot into recovery and after pressing the vol up button there is a droid icon on my screen, but no 'recovery' menu shows up.. then i pressed volup+power button, this action popped up the list of menus of the recovery screen... (do u think this might be a problem?)
please help me i am panicking here..is there anyway i can flash a different recovery..like the eos recovery or the cmw?
HELP !!!!
Click to expand...
Click to collapse
Twrp recovery doesnt mount external sdcard by default, you need to mount it first thru recovery. Just go to mounts and check the box to mount external sdcard
wesamothman said:
Twrp recovery doesnt mount external sdcard by default, you need to mount it first thru recovery. Just go to mounts and check the box to mount external sdcard
Click to expand...
Click to collapse
I am sorry i panicked.. I think its working fine now..i flashed a wrong recovery it seems.
May i ask ! if we are installing the eos 3 rom for the first time, does it take very long to boot the very first time?
because i my xoom is booting up after installing, and the eos logo is on display for more than 10-15 mins.. is it supposed to take this long?
kakrikakri said:
I am sorry i panicked.. I think its working fine now..i flashed a wrong recovery it seems.
May i ask ! if we are installing the eos 3 rom for the first time, does it take very long to boot the very first time?
because i my xoom is booting up after installing, and the eos logo is on display for more than 10-15 mins.. is it supposed to take this long?
Click to expand...
Click to collapse
First time ROM flashing is longer than normal booting, like 5 min ,
If you got stuck in boot loop, reboot into recovery using the power and sound keys combination and clear cache and dalvik and reboot again
kakrikakri said:
I am sorry i panicked.. I think its working fine now..i flashed a wrong recovery it seems.
May i ask ! if we are installing the eos 3 rom for the first time, does it take very long to boot the very first time?
because i my xoom is booting up after installing, and the eos logo is on display for more than 10-15 mins.. is it supposed to take this long?
Click to expand...
Click to collapse
Did you finally succeded "booting" EOS3?
NoP_Compiler said:
Did you finally succeded "booting" EOS3?
Click to expand...
Click to collapse
Yes it did and it works perfectly
Thank you NoP_Compiler and wesamothman
Sent from my Xoom using xda app-developers app
Just to say thanks for 1 of the best tutorials I have ever found,from stock ICS to eos 3 wingray nightly 151 in less than 20 mins. Only prob I had was android SDK wouldn't find x64 java on win had to install 32bit version on top but only hiccup
dead android in step 2
Hi,
Thanks for the great tutorial.
I got thru Step 1, using the image "openrecovery-twrp-2.3.1.0-wingray.img"
In Step 2, when I enter in recovery mode, I get a screen with a "dead droid" image.
Any idea about what I might be missing?
thanks!
Installing ROMS & Such on the A700/701
For Extreme A700/Android Neophytes
Read It All BEFORE Beginning!
Important Links:
http://forum.xda-developers.com/showthread.php?t=1710755 ← Unlock Bootloader
http://forum.xda-developers.com/showthread.php?t=1791165 ← CWM
http://forum.xda-developers.com/showthread.php?t=1806980 ← CM10 Official Thread
http://forum.xda-developers.com/showthread.php?t=2056964 ← CM10.1 Official Thread
http://forum.xda-developers.com/showthread.php?t=2489708 ← CM10.2 Official Thread
-----http://get.cm/?device=a700 ← CM10 Download
-----http://goo.im/gapps ← Google Apps 4.1.2
http://forum.xda-developers.com/showthread.php?t=1995981 ← AOSP 4.2
http://forum.xda-developers.com/showthread.php?t=1952124 ← iconiaN
http://forum.xda-developers.com/showthread.php?t=1953917 ← Vorbeth’s EasyRoot ← Do This to Root!
http://forum.xda-developers.com/showthread.php?t=2004441 ← Vorbeth’s OC GPU Kernel
http://forum.xda-developers.com/showthread.php?t=1994294 ← CoolOne700
http://forum.xda-developers.com/showthread.php?t=2196266 ← IcOdiv for A701 & A700 based on CyanogenMod 10.1
http://forum.xda-developers.com/showthread.php?t=2219575 ← Evil Alex Purgatory A701
http://forum.xda-developers.com/showthread.php?t=2232411 ← 7comp based on RootBox
http://forum.xda-developers.com/showthread.php?t=2510004 ← Official PAC-man 4.3
Software You Will Use/Need (depending on your root method):
http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=4318 ← Acer USB Drivers
http://developer.android.com/sdk/index.html ← Android SDK
General Information:
First off, this was never made adequately clear for new users (without going through a hundred different posts with hundreds of replies): You will be using the Android SDK and the Windows Command Prompt. When installing the Android SDK, change the directory to something easy like C:\SDK because you will be typing it a lot. The directory in that folder you will be using exclusively for this process is the “platform-tools” directory. This is where adb and fastboot are found.
In addition, you will need to activate ADB Debugging on your tablet. This is found by going to Settings -> Developer Options -> USB Debugging. If this isn’t done, you will get nothing accomplished. Yes, you will need to have your tablet connected through USB to your PC for this to work. I know there are other ways, but I’m writing this with brand new users in mind.
After you’ve got that set, you should go ahead and install the Acer USB Drivers. None of my computers could properly identify the tablet without the drivers. Speaking of quirks, 64GB microsd cards are not generally very friendly with CM10 or CWM even when formatted as Fat32. There are lots of issues I can’t find a workaround to. Consider using a 32GB until the kinks are worked out.
I’m also assuming you are currently running the JB OTA that was pushed worldwide in October 2012. If you are not, then there are a few extra steps when installing IconiaN. Although I compiled the instructions you’re reading, I had nothing to do with anything else. In fact, I didn’t write the codes used to install things through the command prompt….I just compiled all the information into one easy-ish to follow paper.
As usual, if anything in this causes a brick to your tablet, it was your decision. I’m just providing the information that has worked for me (repeatedly). Also, as I’m not a developer, nor am I very handy with editing files or trouble shooting things without actually handling them…….Ask your specific questions directly to those people in charge of the files (pawitp, Vorbeth, Moscow Desire, meier2009, odiv81 and alx5962). They’re the gurus at this..I am a plebe in their shadow.
TL;DR:
Install Android SDK to an easy directory.
Install Acer USB Drivers.
Unlock Your Bootloader: (codes from alx5962)
1. Open a command prompt in windows and navigate to the directory where adb is stored. For the sake of conversation, I’m going to call it “C:\SDK\platform-tools”
2. Plug your tablet into your computer through USB. It should automatically mount because you’ve installed the Acer USB Drivers and didn’t skip that step above. J
3. At the command prompt, enter the following:
Code:
adb reboot-bootloader
-- Allow the device to reboot.
4. Type Code:
Code:
fastboot oem unlock
5. Press the + Volume button to select Unlock then - Volume button to confirm.
6. Restart :
Code:
fastboot reboot-bootloader
----- I had issues on step 6. I tried that, and it rebooted to the bootloader screen. To be on the safe side without hard rebooting (not knowing what was going on), I used the command from Step 3. to reboot. This works for ICS and for JB bootloaders, I confirm I used the above steps on both.-----7. Confirmation of your unlocked status will be seen in the upper left hand corner of the screen.
Install Clockwork Mod Recovery: (all work & codes from pawitp)
Somehow I wasn’t able to install this properly (permanently) until last night (11/09/12). I’m still not entirely sure what I did differently, but I’ll try to document it here. The safest version of CWM is 6.0.1.5. Don’t attempt anything without that version or better. I’ve heard that at this time the touch version isn’t working properly, so be sure to download the original style CWM.
To navigate CWM, the following bit of information will come in handy (especially if you’ve never used it before.) Use the ‘Vol-‘ and ‘Vol+’ buttons to navigate up and down and the ‘Power’ button to select your choice. When you have made a choice it will sometimes give a screen with a ton of “NO” options with only one “YES” option (usually near the bottom). Like any good video game, if you scroll upwards, you can get to the bottom of the screen faster.
1. Place the CWM file you downloaded into your “platform-tools” directory. For the sake of being easy to install, I changed the file name to ‘recovery.img.’
2. Open a command prompt in windows and navigate to the directory where adb is stored. For the sake of conversation, I’m going to call it “C:\SDK\platform-tools”
3. Plug your tablet into your computer through USB.
4. At the command prompt, enter the following:
Code:
fastboot flash recovery recovery.img
5. At this point, you have flashed CWM to the system, BUT you will now need to boot into CWM using :
Code:
fastboot boot recovery.img
The caveat here is that you will need to install either a custom ROM or unencumbered boot.img (kernel) NOW. If you do not install one, flashing CWM was pointless because stock recovery will overwrite it at next reboot. When prompted at reboot (leaving CWM after flashing a ROM) you should choose to keep CWM. This was sort of a miscommunication between the devs and myself, but meier2009 and Moscow Desire cleared it up.
-----Step 5. does NOT install recovery, but forces your system to boot into CWM by pushing the file to your A700 from your ‘platform-tools’ directory.-----
For Future Reference: Enter recovery…(JB):
a. With system powered off, press and hold ‘Power’ and ‘Vol -‘
b. When the system vibrates, release the ‘Power’ button.
c. When the system vibrates a second time, slide your finger from ‘Vol-‘ to ‘Vol+.”
d. When the system vibrates a third time, release that button.
Install pawitp’s CM10.1 OR IcOdiv (A701): (all work & codes from pawitp)
Download the CM10 nightly from the official Cyanogen page and grab the Google Apps file (optional, but you won’t have market without it) listed in the links section. Despite what people say, I have always been unable to install from my external SD card. Instead, I save the zip files to the root/main directory of the internal SD. Save BOTH FILES to internal SD at this time. This has always worked for me, but your mileage may vary. You do this at your own risk, blah, blah, blah.
1. Boot your A700 into CWM using the steps outlined in Step 5. (or 6) from “Install Clockwork Recovery Mod.”
2. Backup your system by navigating to “backup and restore” by using the ‘Vol-‘ and ‘Vol+’ buttons to navigate up and down and the ‘Power’ button to select your choice.
3. At this point, there are two options for you. “backup” and “backup to external_sdcard”…. I have never been able to mount my 64GB Fat32 external_sd in CWM. Try a smaller card if you have one available (I don’t). If you can backup to external, that is probably necessary when coming from stock. I would only backup to internal if you are just updating from an older nightly or previous rom.
4. On the main screen, assuming you’re coming from stock JB or ICS, you will need to do a couple of wipes. I’m positive the first is necessary, and have read in other parts of threads and other forums that the other two wipes are needed, but as they’re both called “cache,” I went ahead and did both (with no ill effects).
Select “wipe data/factory reset”
Select “wipe cache partition”
Select “advanced” and navigate to “wipe dalvik cache”
Go back to the main menu.
5. From the main menu, select “install zip from sdcard”.
6. Select “choose zip from sdcard” and scroll down to the CM10 zip file. Press the ‘Power’ button to select and confirm.
After this has successfully installed, you can choose to install Google Apps or not. I’m assuming you will want to install them because…well…who doesn’t?
7. To install Google Apps, follow Steps 3 and 4 from above, but this time you will choose the gapps zip file instead of the CM10 zip.
8. Reboot Device & Enjoy well sorted Jelly Beans.
Install iconiaN: (all work & codes from Vorbeth)
At the moment this is my favorite. It is one version number (4.1.1) behind CM10 (4.1.2), BUT it is compatible with my SD card, and is similar to the stock experience …. only faster and without the bloatware. The only reason it is second in this guide is because of the alphabet (C before I & P before V).
The latest updates to the ROM bring the latest GAPPS and firmware. meier2009’s 4Way Reboot Mod is also included (and rocks).
1. Boot your A700 into CWM.
2. Follow Steps 2-6 from above if coming from stock JB (or CM10, or CoolOne700) with the exception that you’re installing the iconiaN zip (not CM10, duh). Also, iconiaN comes with v4.2 Google Apps pre-installed, so no need for Step 7.
-----2.a. If coming from stock ICS, you will need to install the Jelly Bean Firmware (Found in the Aroma Setup of the ROM)
3. If coming from an older version of iconiaN, you shouldn’t need to do the wipes, but go ahead and do the backup just to be safe.
4. Reboot Device & Enjoy well sorted Jelly Beans.
-----On a side note, I went ahead and installed BusyBox (https://play.google.com/store/apps/details?id=stericson.busybox) not sure if this was necessary, but I am suffering no ill effects from having it running on my tablet. -----
Install Vorbeth's OC GPU Kernel: (all work & codes from Vorbeth)
This is a custom kernel (as of this writing available only for the A700) that overclocks the Tegra 3 from 1.3Ghz to 1.5Ghz. There has been a noted improvement in gaming performance using this kernel.
1. Boot your A700 into CWM.
2. From the main menu, select “install zip from sdcard”.
3. Select “choose zip from sdcard” and scroll down to the iconiaN Kernel zip file. Press the ‘Power’ button to select and confirm.
4. Reboot Device PLAY SOME GAMES! WEE!
Install Vorbeth’s EasyRoot: (all work & codes from Vorbeth)
If for some reason you’re happy with stock and just want a very simple way to ROOT, then this is for you. Using this kernel will cause OTA to stop working (or you will have to edit the updater-script) and remove all the file checks. The latest update has made all previous instructions null, and it is now exceedingly easy to install ROOT on your A700. Awesome! Still, this does require an unlocked bootloader.
1. Download and extract the EasyRoot ZIP on your computer.
2. Locate and double click the file 'easyroot.bat'.
3. Follow all onscreen instructions.
4. Profit.
CoolOne700: (all work & codes from meier2009)
This is the new kid on the block. meier2009 has included three different install options in this ROM including Full (rooted stock), Small (all the Acer bloatware removed), and Custom (Choose what you want.) It’s definitely one to keep an eye on. Custom install is very handy. He’s also got his 4Way Reboot Mod which adds all our favorite reboot/recovery features. Sweet! Also, BusyBox and SuperSU are included on install, so you don’t need to worry about that.
1. Boot your A700 into CWM.
2. Follow Steps 2-6 from CM10 Install if coming from stock JB (or CM10, or iconiaN) with the exception that you’re installing the CoolOne700 zip (not CM10, duh). Also, CoolOne700 comes with Google Apps pre-installed, so no need for Step 7.
-----2. a. If coming from stock ICS, you will need to install the Jelly Bean Firmware (Found in the Aroma Setup of the ROM)
3. If updating from an older version of CoolOne700, you won’t need to do any of the wipes, but it is always a great idea to do the backup.
4. Reboot Device & Enjoy well sorted Jelly Beans.
Code:
6. If upon reboot, you hit the old system recovery, you will need to reflash the recovery.img OR just work around it by doing:
Code:
fastboot boot recovery.img
-----Step 6. does NOT install recovery, but forces your system to boot into CWM by pushing the file to your A700 from your ‘platform-tools’ directory. I had to use this method to install CM10 because I was never able to get CWM to install. Your luck may be different.-----
THAT´s the Trick my Friend !
Install recovery with
Code:
fastboot flash recovery recovery.img
AND THEN
Code:
fastboot boot recovery.img
Install any ROM and if you´re rebooting and asked to FIX Recovery, answer YES, then it will be leaved there !!!
With this way your also able to start CWM Recovery temporary
only use
Code:
fastboot boot recovery.img
then CWM will start, you can flash anything and after that CWM is gone, because the Stock Recovery is always inside the Recovery Partition
Makes sense then how I finally ended up with CWM actually installed on my tablet. Were the original instructions from pawitp mistaken, or just incomplete?
ExtremeRyno said:
Makes sense then how I finally ended up with CWM actually installed on my tablet. Were the original instructions from pawitp mistaken, or just incomplete?
Click to expand...
Click to collapse
Lost in translation...
ROFLMAO
Added more info last night and have now included the AOSP 4.2 to the links. Keepin' this bumped & updated.
Thanks for posting this excellent How To! I used it to install CM10.
I can confirm the backup to external backup functionality does work with a 8 GB MicroSDHC card. One thing you could do to bypass the external vs internal SD card discussion is to use sideloading. I used it to both install CM10 and the Google Apps and it works nicely. Just select Update through sideload in CWM and then enter 'adb sideload <filename>' on the command line and everything works nicely.
Also for the real beginner you could may be suggest backing up all user applications using Titanium Backup in order to easily restore them after flashing a mod.
Bumping thread back near the top. Lots of people got an A700 for the holiday and it seems many of them are bricking or at least screwing things up using outdated methods or strange new forms of CWM from other forums.
Also, thanks for the info, SanjuroE. Appreciated, and I can honestly say I never knew how to do the sideloading thing. I didn't actually realize that was what it was as on my old tablet (three years ago) sideloading was always in reference to installing from the external SD.
This guide was awesome. Many thanks for this.
I flashed CWM 6.0.3.1 via fastboot.
After that I tried fastboot boot recovery.img but it doesn't work.
On the display:
Booting downloaded image.
But nothing happens ??
Can anyone help me ??
schlex2010 said:
I flashed CWM 6.0.3.1 via fastboot.
After that I tried fastboot boot recovery.img but it doesn't work.
On the display:
Booting downloaded image.
But nothing happens ??
Can anyone help me ??
Click to expand...
Click to collapse
Loot at
http://forum.xda-developers.com/showthread.php?t=1791165
Post #166 to end of thread.
cfgh said:
Loot at
http://forum.xda-developers.com/showthread.php?t=1791165
Post #166 to end of thread.
Click to expand...
Click to collapse
Thanks mate!
I tried another recovery.img and than everything went fine!! :good:
USB driver link is not working.
papars said:
USB driver link is not working.
Click to expand...
Click to collapse
Check this : http://forum.xda-developers.com/showpost.php?p=58172023
Many files available, including Drivers
I can't connect my iconia a700 to PC (Windows 10) is say: device not found. Any help?
I install USB Driver, but in Device managers shows Acer Iconia Tab a700 with yellow worming sign.
Driver Issues WIN10
goralpm said:
I can't connect my iconia a700 to PC (Windows 10) is say: device not found. Any help?
I install USB Driver, but in Device managers shows Acer Iconia Tab a700 with yellow worming sign.
Click to expand...
Click to collapse
Hi,
I have the same issue and it took me hours to even find a driver from ACER. But even after the installation I cannot get the tablet to work stable. I installed general MTP drivers which gave me access to the "adb reboot-bootloader" command but during the reboot the tablet gets stuck on the Acer logo screen and does not boot into the bootloader. I have to unplug the tablet and only then I get the white text in the top left corner of the screen saying "starting Fastboot USB download protocol". But that is it. I assume that fastboot would use the Acer drivers to access the tablet but I don't have any for windows 10.
My question: Could somebody post drivers for Windows 10 for the A700/A701?
Thanks
realshadow
realShadow said:
Hi,
... ...
My question: Could somebody post drivers for Windows 10 for the A700/A701?
Thanks
realshadow
Click to expand...
Click to collapse
I had exactly the same problem. The solution was give here: https://forum.xda-developers.com/showthread.php?p=48915118
You don not need Acer driver.
- Wayne
Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Internal Memory
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
TechSoft said:
Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Click to expand...
Click to collapse
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
alanfrank said:
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
Click to expand...
Click to collapse
I've found this: http://forum.xda-developers.com/showthread.php?t=1171531
Any idea if this can be used with another phone them the LG one he have used in the guide?
I cant post in the thread because Im new user here =/
problem
I have done everithing you said, and my cell freezes on boot forever, now what????
BLU Quattro 4.5 HD & 5.7
Need to know how to restore both devices to stock. Any aplication ODIN like to restore it back to stock from the download mode?
Please help me root, i try binary method but i just get boot loop.
Recovery + Root My experience
Hello... I got my BLU Quattro 4.5 (D440) a while back, didn't fuzz with it much right off. The Stock ROM was sluggish at best thought there was even an issue with the Digitizer/screen. But this thread was extremely helpful. I am now running Shendu ROM 4.1.2 one of the suggested ROM's above. I tried the other 2 first and they were mostly in Chineese and I had an especially hard time getting them switched over to English. Either way onward to the point. I have put together a few helpful tips-tricks for my experience with this phone and its phoenix transition to an awesome handset. Thats right now this is my daily driver and I love it! See below hope its helpful.
BLU Quattro 4.5 (440D) GSM Recovery+Root
These steps for this phone only!! Not responsible for any issues.
1. download ROM's, Recovery, & Driver from XDA (this thread)
http://forum.xda-developers.com/showthread.php?t=2327417
2. Enable USB Debugging! Go into Apps-Settings-DevOptions - Check box for USB Debug
3. Have original USB cord if handy! I tried with a Samsung OEM cable but no luck getting drivers to stick. Use original is best. (If you have one.)
Plug in USB Cord to PC then Phone and see if windows detects drivers. let it. It wont get the ones u need later, but what it does find is for USB storage. (you can move over your ROM's/Gapps to storage, downloads folder is a good spot).
4. Go to... http://junefabrics.com/android/downloadold.php to get pdanet software. Install it and it will give i the right drivers for ADB support. I used 4.01 to match the android version currently on my phone.
5. Extract the Driver provided from XDA. Put it in a folder with the ADB commands. Or you can get it all here... http://downloadandroidrom.com/file/GalaxyNexus/rooting/GalaxyNexusRootNew.zipn <-- I know this isn't for BLU but, if you extract this to a folder, and also add the drivers extracted to it as well this works! I've done it.
6. Extract the English Recovery to the same folder.
7. Turn off your phone. Hold down Vol up and Power button for about 5-9 seconds. Once you see a green screen let go of both. Screen may flicker then go black but the icons at the bottom will stay lit. You are now in APX mode (nvflash) mode. (as stated above in original post)
8. Check your Win 7 PC device manager. For a Phone device with ADB. If you you may need to update driver with the one that came from XDA, but the PDANet software should make it work.
8. Go to the folder and find Recovery.bat file (may have Chinese in file name. Double click and a command prompt window will pop up with a bunch of unknown characters, wait 5 sec then hit enter. The batch file should take of pushing the necessary recovery through ADB to the phone. It will error if it can't.
9. If completes OK. Push power for 7-9 seconds to power off the phone. Hit power like normal to turn it back on. It will boot up like normal (or it should).
10. USB is still connected this whole time and you can open a command prompt window. Navigate to the folder you placed the Recovery into. Something like user/username/desktop/BLU/recovery..etc)
Type ADB devices....it should show you that is is connected to your device. Then type " adb reboot recovery " and the device should reboot, give it some time.
11. Once in recovery. Best to do a backup of the original ROM & system. that way you can get back into recovery if anything goes wrong and wipe out the problem by restoring and starting again.
After you backup === you can get into recovery without the command being typed in or even being connected to your PC.... By holding Vol up + Power till you see the green screen then let go of power but keep holding Vol up till you see the BLU Products boot screen then let go ===
Clockworkmod Recovery should be on your screen.
you can reboot phone now and get back to original with no changes. Or you can venture into the world of loading ROM's (There in your downloads folder if you saved them in Step 3)
ROM 101
BACKUP-BACKUP-BACKUP 1st thing once in Recovery ...can't stress enough how much of trouble you can keep yourself out of by keeping an original backup.
As I stated before the Shendu ROM + Gapps is running smooth and all features I've been trying are working flawlessly!! Thanks to original post for getting me going. Just thought I'd add my 2 Cents.
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Altomugriento said:
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Click to expand...
Click to collapse
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
dinizbruno said:
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
Click to expand...
Click to collapse
Do you try the procedure posted in 3dgames . com . ar? ( its my work translated from the 592zn page, all the credits for the chinesse people)
Anyone tried the K-touch V9 kit kat in the BLU??
www
needrom
com/
download/
k-touch-v9-miui-v5-kk
Yes, those roms (v5) are very slow. Just use the 4.0.4 stock.
I want to try the JB stock, but i can´t find the official one anywhere.
Blu quattro 4.5 official rom to download, after you delete the bloatware and put a nice and clean theme you´ll get a nice speed.
orig D440 (quattro 4.5) rom
You can find the rom on google plus under BLU Products Development search for the model!
Hope that helps. I took your advice tonight and I am back running old school. Works ok husfar
I need phone.apk of this rom for Blu Quattro
Trozzul said:
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
Click to expand...
Click to collapse
I need phone.apk for blu quatro
please send me the file
[email protected]