I'm researching batteries with a view to getting the best life possible out of an XDA2 between recharges.
What replacement/spare batteries do people use and what is their power (mAh) rating?
What other things can people tell me on this?
I'm not averse to back-packs etc.
TIA
I have one of the batteries available on eBay. Seems the same as the original battery. I carry the spare in my belt case.
I got mine from www.pdamods.com and have been using it for three months now, must say better than the original and in fact looks like an original !!!
I have three batteries. One came with the unit, I bought another from the same shop, the third I bought 2nd hand. All appear identical and all 1200mah. I swap them through my XDA II every week or so so that they each get drained and recharged regularly. When not in use one is on charge in my desktop cradle in the office, other in my briefcase.
All seem to last about the same amount of time.
Must admit though since buying an integrated car kit for my XDA II (plus GPS) I do not have to swap batteries as often.
Ed
You can find batteries at 1400mAh, same size as the original and officially 20-30% increased autonomy.
Battery question
Thanks everyone for all the help you've given to me in the past. I have a couple battery related questions:
1. I just got a new battery from PCPockettechs. It is rated 3.8VDC 1200 mAh. The current battery in my XDA II is rated 3.7VDC 1200mAh. I have not tried the new battery yet and am worried that the extra 0.1VDC might cause it some harm. Does anyone know or have experience with this difference? Am i worrying for nothing?
2. The extra battery charger that is in the cradle - it does not appear to be working (the light does not come on). Does the XDA II battery have to be fully charged before it starts charging the extra battery? Does the cradle need to be plugged in to the AC (I have the EU cable which I cannot use) before it will charge or can it just be connected via USB as I do now?
Thanks again,
Sean
Hi,
When I purchased mine from www.pdamods.com it worked straight out of the box. Unless it is completely flat it should work even if charged for a short while, however you should charge it for 18 hours on the first charge.
Re: Battery question
senmc said:
Does the cradle need to be plugged in to the AC (I have the EU cable which I cannot use) before it will charge or can it just be connected via USB as I do now?
Click to expand...
Click to collapse
As far a I know you have to use the AC adapter. USB won't work.
Not true, I charge it with the USB, however NOTE it does take longer
The MDAII charges on USB only too.
Not sure about charging an extra battery (that is what the question is about I think)
thanks guys. Yes, the MDA II or XDA II both charge in the cradle just on USB... however, will it also charge the extra battery just on USB? I don't think it will unfortunately.
On my other question: does anyone know if the 0.1VDC difference will make a difference? The battery appears to be the right size, shape, same connectors, etc. as the original battery - the only difference being this 0.1VDC.
Anyone with some good electrical/technical info that they could share would be great. It would put my mind at ease - or stop me from making a big mistake!
The MDA II charges on USB (in the cradle).
But for the extra battery to charge in the cradle you need to plug in the power (and then the light will turn on!).
Hi All,
Couldn't find this posted before so wondered if anyone could recommend a USB Battery Charger to change the batt from my Desire without the phone. I have a spare and going on travels want to be able to just leave the battery charging on its own and not use the phone all the time.
Ive seen quite a few on ebay and some look really dodgy with adjustable charging pins etc whereas others are ridiculously cheap and i can only imagine will ruin my battery.
Key points are it should be small, light, USB powered and whilst I accept it will not charge as good/full as through the phone - not to knacker my batt completely.
Cheers for any help.
Bridgstfer
I have been looking for the same thing and found a battery pack on Amazon for £25, manufactured by New Trent it has a 5000mAh battery in it and can recharge your phone at least 3 times.
I ordered the dual output version on Sunday, so hope to get it and try it out in a couple of days.
Using a Veho pebble here, works great
would be nice for a faster charge though, it seems a bit slow for 750ma
mps711 said:
I have been looking for the same thing and found a battery pack on Amazon for £25, manufactured by New Trent it has a 5000mAh battery in it and can recharge your phone at least 3 times.
I ordered the dual output version on Sunday, so hope to get it and try it out in a couple of days.
Click to expand...
Click to collapse
I've got one of those. It's really good, one of the outputs is 1A so charges up really quickly.
My only criticism is the on/off button is easily pressed by accident, but that's really looking for problems. Oh and it would have been nice if the usb socket to charge it was a microusb one so I could use the same lead as the phone.
It's a good battery pack.
It certainly sounds like it is going to be good.
With regards to charging the pack itself, does it come with a USB to mini USB charging lead?
mps711 said:
It certainly sounds like it is going to be good.
With regards to charging the pack itself, does it come with a USB to mini USB charging lead?
Click to expand...
Click to collapse
Mine didnt come with any charger or leads but as I have a box full of that stuff it wasn't an issue.
Edit: I'm an idiot. It came with a lead with a selection of interchangable tips to fit most phones.
I forgot as this is now also living at the bottom of my tangled box of leads.
Thanks for the replies guys.
Yeah i actually had one of those external battery packs (5000mah) but found that you could not even get 2 full charges out of it and therefore not worth the extra weight/charge time.
Basically its misleading because the voltage of the battery is different to you phone battery and it need to be upscaled or something - there are quite alot of posts about it. Let us know if you manage to get 3 charges though - that would be good.
But anyone used external chargers for the a spare phone battery?
So I was wondering if I could find the original G2 wall charger, the one that came in the box. I bought my phone from craigslist and that guy didnt have the charger for some reason. I've been using some motorola one and very happy with it cause it didnt have rapid charging and battery life was great too (not sure if the charger plays a role). But couple weeks ago the wire got loose and wouldnt connect properly, so I bought this: http://cgi.ebay.com/ws/eBayISAPI.dl...331986&ssPageName=STRK:MEWNX:IT#ht_1184wt_950
Ever since I've been using that my phone goes to 100% from 10% in two hours, and battery life has been bad too since using that. I have used the phone the same was as before, I even calibrated it again, tried it with setcpu and no setcpu, used edge only also, tried different roms, used just wifi only etc, and battery life still not same as before. I mean it has to be the charger right? Otherwise it wouldnt have made a difference in using a different one. So I'm trying to find opinions from you guys to see if I can find the original one ( I have no idea what it looks like) or a similar one from ebay/amazon. Thanks for reading!
What is the rated Output on the charger that you have? The stock one is supposed to put out 1 Amp (1000 ma). It isn't uncommon for it to go from 10 to 'full' in 2 hours, but just because the phone shows it full, doesn't mean its there. Are you charging overnight or just for that 2 hour period?
Yes I am charging overnight. Output says 5V, 1A, so I'm guessing thats 1000ma/1Amp?
The G2's cord is rounder at the USB end and the Plug- in end, but I would think it would not make a giant difference since I use a Motorola one since I don't know where my original one went.
OEM HTC charger
I'm not sure if your still looking, but i bought a Brand New OEM HTC charger from eBay. It was the same thing that came with G2. I'm pretty sure by the time you see this it will be sold but they list them everyday so just look at the sellers other items.
Since I'm a new user i cant post links, but the item number is 160619103766
http://web50-shopamerica.htc.com/accessories/accessory_result.htm
quierotacobell said:
Output says 5V, 1A, so I'm guessing thats 1000ma/1Amp?
Click to expand...
Click to collapse
That is the maximum current supported by the charger, but the device may request a lower current. Use something like Battery Monitor Widget or Current Widget to see how much current is actually being drawn over the USB port. The most accurate reading will be taken when the screen is off, the CPU is idle and underclocked, all radios are off, etc.
I had a cheap no-name AC adapter for my DZ, but it caused the touchscreen to go bonkers. I ended up buying one of these adapters:
http://canadacomputers.com/product_info.php?item_id=039726
Inexpensive, and having two USB ports is very convenient. One goes to my Mugen DZ charging cradle (phone + spare battery), the other to my BT headset. Any standard USB cable will work. It does not cause problems with the touchscreen, so I can continue to use the phone even while it is charging.
The best I've seen on a DZ is about 650 mA net charge, which means an empty 1800 mAh battery should be fully charged in about 3 hours.
I've seen logs of my dz charging at 680-780mA, so long as you have a 1A output charger it should charge the same. The output is the max rated output, not what its feeding to the phone to charge.
On that note most moto chargers I've seen are 700mA max out and same with a lot of samsung chargers I've owned. I use my original that came with my g2 as well as an old htc diamond wall charger with a sony usb cable lol, I get the same charge from both.
Sent from my HTC Vision using XDA Premium App
I want a charging dock for my S4 that will feed the phone the full amount of power that it can take, for quickest charging. I believe the stock charger that came with it supplies 2 amps.
I also would like said charger to have a slot for charging a spare battery at the same time.
All the charging docks I've found so far only claim to supply 1 amp to the phone, or less. Except one dock I found that did say it outputs 1.6 amps.
Does anybody know of a charging dock that will supply the full 2 amps? How about one that also has a slot for charging a spare battery?
Thanks.
stuartv said:
I want a charging dock for my S4 that will feed the phone the full amount of power that it can take, for quickest charging. I believe the stock charger that came with it supplies 2 amps.
I also would like said charger to have a slot for charging a spare battery at the same time.
All the charging docks I've found so far only claim to supply 1 amp to the phone, or less. Except one dock I found that did say it outputs 1.6 amps.
Does anybody know of a charging dock that will supply the full 2 amps? How about one that also has a slot for charging a spare battery?
Thanks.
Click to expand...
Click to collapse
Would you like it to serve you eggs and ham as well?
Damn.. you are really asking for so much and not nearly searching for it yourself enough if that makes sense.
There are charging docks that have a battery charger slot as well. They have a microusb port for power input. You can use a 2A charger with it and I believe it should be charging the phone at 2A but only when you're not charging the spare battery. I do not have the link as I saw it while randomly browsing through S4 docks on eBay. It's easy enough to find.
No, thanks. If it could cook my eggs and ham, it would be too bulky. LOL!
I looked through roughly 150 listing on eBay. I saw a whole bunch that said 1A output. And a few that were 700 mA, and at least one that was 500 mA. And exactly one model, available from a few different vendors, that said 1.6A output.
I did not see any that said 2A output. Just because the wall wart can supply as much as 2 amps, doesn't mean the charger will actually output that much to the phone.
stuartv said:
No, thanks. If it could cook my eggs and ham, it would be too bulky. LOL!
I looked through roughly 150 listing on eBay. I saw a whole bunch that said 1A output. And a few that were 700 mA, and at least one that was 500 mA. And exactly one model, available from a few different vendors, that said 1.6A output.
I did not see any that said 2A output. Just because the wall wart can supply as much as 2 amps, doesn't mean the charger will actually output that much to the phone.
Click to expand...
Click to collapse
My advice, is you should risk it.
If you're looking a product with such precise specs, I'm afraid you're not going to find it.
I messaged several different ebay sellers last night to ask if their charger is really only 1A and if they'll be having a 2A model. So far, I've gotten responses from 3 or 4. All of them have said sorry, we only have 1A. Please note, it will charge more slowly.
Update info. This may be old news to many, but here it is.
I had an online chat with a Supervisor at Seidio this morning. Their website has 2 charging docks for the S4 and neither lists charging output.
They told me that the dock will output whatever the wall adapter supplies. The charging dock is a passthrough. So, if I use the stock OEM charger with the Seidio dock, my phone will (allegedly) still receive 2A of charging current.
This may have been intuitively obvious to some, but it wasn't to me.
So, my quest is now much easier. Apparently, the docks I looked at on eBay that say 1A charging output must say so because the supplied wall adapter only provides 1A. And ones that say that but don't include the AC adapter are just making an assumption about that AC adapter you'll use.
BUT, though the phone charging port may be a passthrough, the slot for charging a second battery (on docks that offer that) would have the charging logic/circuitry built into the dock, so that could still be limited to 1A or less. At least, that's what I think. Could be wrong.
Regardless, i ordered a cheap dual charging dock off eBay that should be here by Friday. Using Galaxy Charging Current (a free app in the Play store), my phone shows 1900 mA charging current when plugged into the OEM charger directly. After I get the dock I ordered, I'll test that and report back.
If the dock will charge the phone at full speed, I can live with the spare battery being charged more slowly.
stuartv said:
I want a charging dock for my S4 that will feed the phone the full amount of power that it can take, for quickest charging. I believe the stock charger that came with it supplies 2 amps.
I also would like said charger to have a slot for charging a spare battery at the same time.
All the charging docks I've found so far only claim to supply 1 amp to the phone, or less. Except one dock I found that did say it outputs 1.6 amps.
Does anybody know of a charging dock that will supply the full 2 amps? How about one that also has a slot for charging a spare battery?
Thanks.
Click to expand...
Click to collapse
It's NOT a dock but a charger and it does come with an OEM spare battery. It charges a battery from 0 to 100% in about 4 hours, which is faster than your phone would deplete a battery, even when gaming. Paid $47, no shipping from Amazon
I see the price have changed a bit meanwhile but it's worth it if they still don't charge any shipping. Ships directly from Korea (made in Korea - both, charger and battery)
stuartv said:
Update info. This may be old news to many, but here it is.
I had an online chat with a Supervisor at Seidio this morning. Their website has 2 charging docks for the S4 and neither lists charging output.
They told me that the dock will output whatever the wall adapter supplies. The charging dock is a passthrough. So, if I use the stock OEM charger with the Seidio dock, my phone will (allegedly) still receive 2A of charging current.
This may have been intuitively obvious to some, but it wasn't to me.
So, my quest is now much easier. Apparently, the docks I looked at on eBay that say 1A charging output must say so because the supplied wall adapter only provides 1A. And ones that say that but don't include the AC adapter are just making an assumption about that AC adapter you'll use.
BUT, though the phone charging port may be a passthrough, the slot for charging a second battery (on docks that offer that) would have the charging logic/circuitry built into the dock, so that could still be limited to 1A or less. At least, that's what I think. Could be wrong.
Regardless, i ordered a cheap dual charging dock off eBay that should be here by Friday. Using Galaxy Charging Current (a free app in the Play store), my phone shows 1900 mA charging current when plugged into the OEM charger directly. After I get the dock I ordered, I'll test that and report back.
If the dock will charge the phone at full speed, I can live with the spare battery being charged more slowly.
Click to expand...
Click to collapse
Hope it works out. The dock i ordered from seidio for my evo 3d did not charge at full power with the supplied adapter. I used a diff cable and power source and the results were better, but still not very good. Most nights I simply removed the cable and plugged the phone directly to it bypassing the dock, kind of defeated the purpose. I hope to find one that keeps the S4 charged.
Well, I received my eBay dock today, 2 days early. It is this one:
http://www.ebay.com/itm/111066155507?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
And when I plug it in and put the phone in it, I get a message that the connected charger is not compatible with this phone. And the phone shows a red X over the battery icon in the notification bar, and doesn't charge at all.
I tried it using the OEM charger and cable, the cable that came with the dock, and I also tried both cables using my OEM charger that came with my Note 10.1 tablet.
Exactly one time, when I put the phone into the dock, it didn't display a message and Galaxy Charging Current (app in Play) showed that it was charging at 1900 mA. But, several times before, and every time after that, it just displayed the message and wouldn't charge at all.
:crying:
nacos said:
It's NOT a dock but a charger and it does come with an OEM spare battery. It charges a battery from 0 to 100% in about 4 hours, which is faster than your phone would deplete a battery, even when gaming. Paid $47, no shipping from Amazon
I see the price have changed a bit meanwhile but it's worth it if they still don't charge any shipping. Ships directly from Korea (made in Korea - both, charger and battery)
Click to expand...
Click to collapse
I've seen that and that's a big "no way". My normal deal is, if I run out of battery, it's because I'm out and about. Traveling on a plane. Riding my motorcycle. Whatever. Situations where I don't have the option to plug in. So, I swap batteries on the go and the charge when I get to where I'm going.
This charger on Amazon would require me to carry it, plus my phone charger, plus an additional phone charger to run the separate battery charger. If I were just going to share my phone charger between the phone and the separate charger, I would rather just have the phone on the charger and, when it's fully charged, swap batteries, to charge the next one - not swap the charger cable over to the separate battery charger.
if I were going to go the route of a separate battery charger, I would spend $7 or so on eBay on one of the ones that has a flip-out plug built in and plugs right into the wall. That is the kind I have been using for a while to charge my Rezound batteries when traveling.
The biggest problem with those is that they charge the battery at something like 350mA. Ridiculously slow!
stuartv said:
I've seen that and that's a big "no way". ...if I run out of battery, it's because I'm out and about. Traveling on a plane. Riding my motorcycle. Whatever. Situations where I don't have the option to plug in. So, I swap batteries on the go and the charge when I get to where I'm going.
Click to expand...
Click to collapse
...buddy, that's EXACTLY what this is. It simply gives you the option of charging another OEM battery (in the charger NOT in the phone) BEFORE you go out and about and then swap them as you need.
NO, it's NOT charging as slow as you suggest. They use a technology called direct charge which means that it draws as much (or as little) as your wall plug allows it. In other words if you plug it in the PC USB, then yes, you'll have to wait until you grow a nice thick beard, but if you plug it in your original 2A charger, it'll charge the battery from 0-100% in about 4 hours or less.
stuartv said:
This charger on Amazon would require me to carry it, plus my phone charger, plus an additional phone charger to run the separate battery charger.
Click to expand...
Click to collapse
Absolutely NOT true:
1. You ONLY need to carry the charger if you plan on recharging the depleted battery BEFORE doing another swap - that's at least 12-15 hours on EXTENSIVELY using BOTH batteries - that's 12-15 hours screen on!!!
2. ONE phone charger can be used on either/or - you'll never have to charge them both in the same time (that's the idea with swapping the batteries, right?)
stuartv said:
If I were going to go the route of a separate battery charger, I would spend $7 or so on eBay on one of the ones that has a flip-out plug built in and plugs right into the wall.
Click to expand...
Click to collapse
Up to you buddy, but usually you get what you pay for. The one I suggested comes with an OEM battery. I always suggest using this method over any battery pack as an OEM battery will ALWAYS give you just as much "juice" (this translates into running time) as the...yeah, you guessed it, the Original Equipment Manufacturer's battery. Although the battery packs manufacturers, they all claim huge capacities and running times, this mostly never holds true to the advertised specifications. It's called marketing
nacos said:
...buddy, that's EXACTLY what this is. It simply gives you the option of charging another OEM battery (in the charger NOT in the phone) BEFORE you go out and about and then swap them as you need.
NO, it's NOT charging as slow as you suggest. They use a technology called direct charge which means that it draws as much (or as little) as your wall plug allows it. In other words if you plug it in the PC USB, then yes, you'll have to wait until you grow a nice thick beard, but if you plug it in your original 2A charger, it'll charge the battery from 0-100% in about 4 hours or less.
Absolutely NOT true:
1. You ONLY need to carry the charger if you plan on recharging the depleted battery BEFORE doing another swap - that's at least 12-15 hours on EXTENSIVELY using BOTH batteries - that's 12-15 hours screen on!!!
2. ONE phone charger can be used on either/or - you'll never have to charge them both in the same time (that's the idea with swapping the batteries, right?)
Up to you buddy, but usually you get what you pay for. The one I suggested comes with an OEM battery. I always suggest using this method over any battery pack as an OEM battery will ALWAYS give you just as much "juice" (this translates into running time) as the...yeah, you guessed it, Original Equipment Manufacturer's battery. Although the battery packs manufacturers, they all claim miraculous capacities, they NEVER actually last as per specifications. It's called marketing
Click to expand...
Click to collapse
I don't think you're getting me. The point is, I get to the end of the day and I need to charge my phone AND the battery I used up. In order to charge both at the same time, using this Samsung separate battery case/charger, I would have to have 2 actual chargers. One to attach to my phone, to charge that battery, and one to attach to the separate case/charger.
Get it now?
More detailed:
- I start the day with 2 fully charged batteries. One is in the phone.
- I ride my motorcycle all day, streaming music via Bluetooth to my helmet, and talking on the phone while I'm riding.
- Before I'm done riding for the day, my battery dies, so I swap it.
- I continue riding, etc.
- I get where I'm going and I'm ready to go to bed.
- I now have a dead battery in one hand and phone with a partly depleted battery in the other hand. I want them to both charge while I'm sleeping.
This separate case/charger does not help me.
stuartv said:
I don't think you're getting me. The point is, I get to the end of the day and I need to charge my phone AND the battery I used up. In order to charge both at the same time, using this Samsung separate battery case/charger, I would have to have 2 actual chargers. One to attach to my phone, to charge that battery, and one to attach to the separate case/charger.
Click to expand...
Click to collapse
No offense, but I believe you don't get it. You say: "I need to charge my phone AND the battery". I should ask you then, do you still need to charge your phone and the BATTERIES (this is the plural, meaning two or more) should you go by my suggestion?
Either, or, if you're such a heavy user and you find yourself at the end of the day with 2 or more depleted batteries on a regular basis, then this becomes even more handy - admittedly, yes, using a second wall plug...or, again, if you're such a heavy user, then buy a 3rd OEM battery - case solved. (1 charger, 2 extra batteries, 1 USB cable, 1 wall plug)
nacos said:
No offense, but I believe you don't get it. You say: "I need to charge my phone AND the battery". I should ask you then, do you still need to charge your phone and the BATTERIES (this the plural, meaning two or more) should you go by my suggestion?
Either, or, if you're such a heavy user and you get to deplete 2 (or more) batteries on a regular basis, then this becomes even more handy - admittedly, yes, using a second wall plug. Furthermore, again, if you're such a heavy user, then buy a 3rd OEM battery - case solved. (1 charger, 2 extra batteries, 1 wall plug)
Click to expand...
Click to collapse
You obviously didn't read my whole last post. Otherwise, you would understand that saying "I need to charge my phone AND the battery" is a short way of saying "I need to charge the battery that's in my phone (but not totally dead yet) AND the battery that I depleted earlier in the day."
And if I added a 3rd OEM battery (which you would also see that there is no need for, if you read my whole previous post), it still would not change the fact that, at the end of the day, I have 2 batteries I need to charge and only 1 wall charger to use. So, the separate case/charger still does not help.
If I charge the battery in my phone and then want to use my one and only wall charger to charge the battery that's in the case/charger, I may as well just swap the batteries and charge the second battery in my phone. Thus, I would save running down the battery that's in my phone while the other battery is charging in the case/charger AND I would save spending $50 on the case/charger when I just used my coupon last night and got an OEM battery straight from Samsung for only $20.
stuartv said:
You obviously didn't read my whole last post. Otherwise, you would understand that saying "I need to charge my phone AND the battery" is a short way of saying "I need to charge the battery that's in my phone (but not totally dead yet) AND the battery that I depleted earlier in the day."
And if I added a 3rd OEM battery (which you would also see that there is no need for, if you read my whole previous post), it still would not change the fact that, at the end of the day, I have 2 batteries I need to charge and only 1 wall charger to use. So, the separate case/charger still does not help.
If I charge the battery in my phone and then want to use my one and only wall charger to charge the battery that's in the case/charger, I may as well just swap the batteries and charge the second battery in my phone. Thus, I would save running down the battery that's in my phone while the other battery is charging in the case/charger AND I would save spending $50 on the case/charger when I just used my coupon last night and got an OEM battery straight from Samsung for only $20.
Click to expand...
Click to collapse
OK, now I did get what you were saying (admittedly, I didn't read the whole post initially) but I still believe that carrying a second set (wall charger + USB cable) would render a better overall usage time without compromising on convenience or quality (again, due to using a certified OEM battery). Think about it, the only "compromise" you're making is carrying another set - which is nothing, both in terms of money and used space/volume.
So, your on-the-go package would consist of: 1 Samsung charger, 1 extra battery and 2 sets of wall chargers/USB cables.
Now, we're getting somewhere!
Your alternative would cost me something like $70 for the case/charger (w/battery) plus a second AC adapter.
My alternative will cost me less than $30. $20 that I already spent on a second OEM battery, plus less than $10 for a wall charger like this:
http://www.ebay.com/itm/Charging-Cr...l_Phone_PDA_Chargers&var=&hash=item27d35082af
And I have less "pieces" to carry around.
Of course, the cheap wall charger won't charge the battery as quickly. But, I have been using a charger just like that for my Rezound batteries for a while now and it always seems to manage to get the job done overnight.
However, the PREFERRED solution is what I asked about in my OP in this thread. I want a dock that will supply full power to the phone and a spare battery at the same time. As I posted later in this thread, it now seems that most any charging dock should supply full power to the phone (as long as the AC adapter is providing 2A). Those docks still won't probably give full power to charge the spare battery, but I can live with that. So, with a dock like that, I would carry the same number of "pieces", but I'd have the advantage of having a dock to prop my phone up next to the bed, so I can see it.
stuartv said:
Update info. This may be old news to many, but here it is.
I had an online chat with a Supervisor at Seidio this morning. Their website has 2 charging docks for the S4 and neither lists charging output.
They told me that the dock will output whatever the wall adapter supplies. The charging dock is a passthrough. So, if I use the stock OEM charger with the Seidio dock, my phone will (allegedly) still receive 2A of charging current.
This may have been intuitively obvious to some, but it wasn't to me.
Click to expand...
Click to collapse
I can 100% attest to this NOT being true. I have my OEM Samsung S4 2A charger hooked up to my Seidio Innodock Jr. at it receives a MAX of 1020mA. Yes, I realize it isn't the exact charger you are looking for since it doesn't have the spare battery compartment, but Seidio is NOT being truthful to you when they say that it is "a passthrough" dock. Just a heads up!
KryptosXLayer2 said:
I can 100% attest to this NOT being true. I have my OEM Samsung S4 2A charger hooked up to my Seidio Innodock Jr. at it receives a MAX of 1020mA. Yes, I realize it isn't the exact charger you are looking for since it doesn't have the spare battery compartment, but Seidio is NOT being truthful to you when they say that it is "a passthrough" dock. Just a heads up!
Click to expand...
Click to collapse
What are you using to determine your max of 1020A? Galaxy Charging Current? Battery Monitor Widget?
stuartv said:
What are you using to determine your max of 1020A? Galaxy Charging Current? Battery Monitor Widget?
Click to expand...
Click to collapse
Both, they both display the same data - the BMW widget takes longer to update since I paid for the full version of GCC
KryptosXLayer2 said:
Both, they both display the same data - the BMW widget takes longer to update since I paid for the full version of GCC
Click to expand...
Click to collapse
I have both and they do not display the same data. As far as I can tell, GCC shows the actual full incoming current. OTOH, BMW shows the current being used to charge the battery.
When I plug in my OEM charger, GCC shows 1900. But, if the screen is using 100 and other stuff running is using another 100, the BMW would only show 1700.
So, as far as your post about the Innodock, if GCC shows 1020, then that's what I would believe. But, if it's BMW that's telling you 1020, then that could simply be because there is other stuff using almost 900 mA of current.
For the record, I looked through my BMW Usage log from last night when my phone was on the charger. The log shows every 5 minutes, I think. It only had one log entry where it showed 1992. All the rest were in the 1500 - 1600 range or less. And the phone screen was off that whole time.