I updated to 4.0.3 and got bootloop/blackscreen, and then tried to downgrade to 2.3.5 and stuck with FlashBoot screen, with these words:
Invailid CG OTV (CG: cdrom): Invalid SP Data
Invailid CG OTV (CG: system): Invalid SP Data
Invailid CG OTV (CG: webtop): Invalid SP Data
Invailid CG Version (CG: recovery)
when I power up my phone ,I got blackscreen,said:
Invailid CG Version (CG: boot)
what can I do for my Atrix2(at&t)?can you help me ?
thanks a lot
I got 4.0.3from here:
cm9-edison-20120302
Wow! Have u tried flashing the 2.3.5 fxz?
Sent from my MB865 using XDA App
Next time please do a search, this has been covered and is a sticky in this section.
Here, this is how to fix it:
http://forum.xda-developers.com/showthread.php?t=1493386
oh,no,my phone is 4.0.3,not 2.3.6
what can i do
jimbridgman said:
Next time please do a search, this has been covered and is a sticky in this section.
Here, this is how to fix it:
http://forum.xda-developers.com/showthread.php?t=1493386
Click to expand...
Click to collapse
I have tried,but it does not work,have the same error
jimbridgman said:
Next time please do a search, this has been covered and is a sticky in this section.
Here, this is how to fix it:
http://forum.xda-developers.com/showthread.php?t=1493386
Click to expand...
Click to collapse
I flashed my phone to 4.0.3 before,I want to downgrade to 2.3.5,then it said four error:
Invailid CG OTV (CG: cdrom): Invalid SP Data
Invailid CG OTV (CG: system): Invalid SP Data
Invailid CG OTV (CG: webtop): Invalid SP Data
Invailid CG Version (CG: recovery)
when I reboot my phone ,I got blackscreen,said:
Invailid CG Version (CG: boot)
does the 4.0.3 downgrade to 2.3.5 and 2.3.6 downgrade to 2.3.5have the same method?
tuzisiji001 said:
I updated to 4.0.3 and got bootloop/blackscreen, and then tried to downgrade to 2.3.5 and stuck with FlashBoot screen, with these words:
Invailid CG OTV (CG: cdrom): Invalid SP Data
Invailid CG OTV (CG: system): Invalid SP Data
Invailid CG OTV (CG: webtop): Invalid SP Data
Invailid CG Version (CG: recovery)
when I power up my phone ,I got blackscreen,said:
Invailid CG Version (CG: boot)
what can I do for my Atrix2(at&t)?can you help me ?
thanks a lot
I got 4.0.3from here:
cm9-edison-20120302
Click to expand...
Click to collapse
EDIT: nvm didnt read it completely
tuzisiji001 said:
I flashed my phone to 4.0.3 before,I want to downgrade to 2.3.5,then it said four error:
Invailid CG OTV (CG: cdrom): Invalid SP Data
Invailid CG OTV (CG: system): Invalid SP Data
Invailid CG OTV (CG: webtop): Invalid SP Data
Invailid CG Version (CG: recovery)
when I reboot my phone ,I got blackscreen,said:
Invailid CG Version (CG: boot)
does the 4.0.3 downgrade to 2.3.5 and 2.3.6 downgrade to 2.3.5have the same method?
Click to expand...
Click to collapse
Where did u get that upgrade from. Didn't u know we don't have that for our phone?
Deliberate said:
Where did u get that upgrade from. Didn't u know we don't have that for our phone?
Click to expand...
Click to collapse
I get it from here :
h t t p://1 15.co m/ fi le/ anfk ix4o #cm 9-edi son-2012 0302-vid1 90.zip
(delete the blank space by yourself)
From that thread, did you try downloading moto-fastboot and reflashing that way using the boot.img in the thread?
Moverf16 said:
From that thread, did you try downloading moto-fastboot and reflashing that way using the boot.img in the thread?
Click to expand...
Click to collapse
no,I think it is dangerous,I have not try it before,can you tell me the detail step?thanks a lot
Hi,
This forum mui rom install,format / webtop after reboot,
Invalid CF OTV (CG:webtop):Invalid SP Data
Invalid CG Version (CG:webtop)
Invalid CG OTV (CG:webtop)
This forum subject ''2.3.6 from modified 2.3.5 Flashboot: "Invalid CG Version" FIX'' make but not fix problem
help please
Thanks
Hi
Last night i trying to clean my Instagram cache (Near 1.5 GB ) in that progress my phone going crazy and freezing and i hold power button for restarting phone but after phone restarting my device stuck in red Motorola logo
also recovery and fastboot still working so i trying to wipe my cache partition and factory rest but after wiping and factory rest phone still stuck in red logo , so i trying for flashing my phone with "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF" because my phone was updated to last version via OTA to last firmware without unlocking boot loader.
After removing var line in .xml file my phone have problem with flashing
this is what i see in my fast boot screen in my phone display
10.98(*) (sha-61146a2,2014-07-29 )
device is locked status code 0
battery ok
field to read signature for partition about
RSD 6.2.4 Log :
11/28/15 19:43:38 New Log Started For Software Download.
11/28/15 19:44:31 The FlashLog key is turned off.
11/28/15 19:44:36 Arrival, interface=28(0x0), device id=28.
11/28/15 19:44:40 Multi upgrade started for 1 phones
11/28/15 19:44:40 [Device ID: 0] 1/16 oem fb_mode_set
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn"
11/28/15 19:44:40 ERROR: 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL. - on device ID 0.
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL.
11/28/15 19:44:40 ERROR: Failed flashing process. - on device ID 0.
11/28/15 19:44:40 Multi upgrade finished.
11/28/15 20:05:32 Removal, interface=28(0x0), device id=28.
How can fix my phone ????
Sorry for my bad English.
kami_vile said:
Hi
Last night i trying to clean my Instagram cache (Near 1.5 GB ) in that progress my phone going crazy and freezing and i hold power button for restarting phone but after phone restarting my device stuck in red Motorola logo
also recovery and fastboot still working so i trying to wipe my cache partition and factory rest but after wiping and factory rest phone still stuck in red logo , so i trying for flashing my phone with "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF" because my phone was updated to last version via OTA to last firmware without unlocking boot loader.
After removing var line in .xml file my phone have problem with flashing
this is what i see in my fast boot screen in my phone display
10.98(*) (sha-61146a2,2014-07-29 )
device is locked status code 0
battery ok
field to read signature for partition about
RSD 6.2.4 Log :
11/28/15 19:43:38 New Log Started For Software Download.
11/28/15 19:44:31 The FlashLog key is turned off.
11/28/15 19:44:36 Arrival, interface=28(0x0), device id=28.
11/28/15 19:44:40 Multi upgrade started for 1 phones
11/28/15 19:44:40 [Device ID: 0] 1/16 oem fb_mode_set
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn"
11/28/15 19:44:40 ERROR: 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL. - on device ID 0.
11/28/15 19:44:40 [Device ID: 0] 2/16 flash sbl2 "sbl2.mbn" -> Phone returned FAIL.
11/28/15 19:44:40 ERROR: Failed flashing process. - on device ID 0.
11/28/15 19:44:40 Multi upgrade finished.
11/28/15 20:05:32 Removal, interface=28(0x0), device id=28.
How can fix my phone ????
Sorry for my bad English.
Click to expand...
Click to collapse
I have the same problem why no one answer ;(
I have a Motorola Xoom 2 (MZ615-16) at some point one of the kids has fiddled about with it and now it wont boot up at all. i keep getting a black display with white writing on it. If anyone can help me or give guidance to how to restore what seems to be a boot failure it would be very helpful.
This is what appears on the Xoom 2
AP Fastboot Flash Mode (S) (Boot Failure)
0A.74 (sha-db24cb6, 2012-04-25 10:52:50)
eMMC Info: Size 16G
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
Hope someone can help me restore this.
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
Wait for phone...
Phone found! [ 1087 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122and I get this message error if I try to flash it with MT6750
Error: STATUS_INSUFFICIENT_BUFFER
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!
Operation Failed
Elapsed: 00:00:52
Reconnect Power/Cable!
Click to expand...
Click to collapse
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
octopus82 said:
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
Click to expand...
Click to collapse
I have pretty much the same problem with my MOTO M (XT1662). It happened after I did the "Format whole flash" in SP flash tool.
Now the SP flash tool is giving me the following,
Chip Info
=======
Chip name: MT6755
Chip Version: 0x0000cb00
Ext Clock: EXT_26M
Extern RAM Type: DRAM
Extern RAM Size: 0xc0000000 (!!!)
SRAM Size: 0x00040000
EMMC Flash
=========
Boot 1 Size: 0x400000
Boot 2 Size: 0x400000
RPMB Size: 0x400000
GP1 Size: 0x0 (same for GP2, GP3 and GP4)
UA Size: 0x747c00000
No matter what ROM I'm trying to flash (stock or custom) , I always get the error "STATUS_INSUFFICIENT_BUFFER (0xC0010007)".
It looks like it has to do something with the External RAM Size (0xc0000000).
I found this firmware "XT1662_Kungfu_m_MT6755_USR_S0924_1612291517_mp7V2.3_CN (RepairMyMobile.in)", which seems to be what I need but I can't get pass this error.
Any help will be greatly appreciated.
i have the same problem
STATUS_INSUFFICIENT_BUFFER (0xC0010007)
i try to update with OTA and failed too
anyone can help ?