Database Info

How to compile Jelly Bean from Source [UBUNTU]

Hey there! I know the current situation in the i9003. We have a functional but not full ICS and now we need kernel 3.X to make everything work perfectly. Dhiru is working hard, he made a very very good work but he cannot do more until hillbeast finishes a bootable 3.0 kernel. A few hours ago, JB Source Code was released and now it can be compiled from source. I have read a good tutorial made by dastin1015 which explains how to do that. I say THIS IS NOT MY WORK (obviously) so credits go for him.
If somebody knows how to do that, please, try it. Probably we will be saving a lot of time for further development. Only to make it boot in a i9003 is a big step and a big contribution for the community. Here are the steps:
GUIDE - HOW TO COMPILE JB ON UBUNTU FROM SOURCE​
To compile Jellybean on Ubuntu I'm going to first give you steps to set up your computer to get this thing rolling. Also note that this appears to be a development preview source code.
This will NOT make a fully functional ROM, but will give you a place to start. Also I CANNOT fix every error you run into.
Note: The source download is approximately 6GB in size. You will need 25GB free to complete a single build, and up to 80GB (or more) for a full set of builds.
1) You need the following:
-JDK 6 if you wish to build Jellybean. You can download it from java.sun.com. Or:
Code:
$ sudo apt-get install sun-java6-jdk
-Python 2.4 -- 2.7, which you can download from python.org. Or:
Code:
$ sudo apt-get install python
-Git 1.7 or newer. You can find it at git-scm.com. Or:
Code:
$ sudo apt-get install git-core
2) Install required packages. 64-bit (recommended)
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils
On newer versions of Ubuntu such as 11.10 you may need to do the following:
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
Building on Ubuntu 12.04 is currently only experimentally supported and is not guaranteed to work on branches other than master.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
3) Configure your USB.
Code:
$ gksudo gedit /etc/udev/rules.d/51-android.rules
Inside of this blank text file insert:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
4) Save the file and close it and then issue this command:
Code:
$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
5) Install the repo:
Code:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
6) Initialize the repo:
Code:
$ mkdir WORKING_DIRECTORY
$ cd WORKING_DIRECTORY
$ repo init -u https://android.googlesource.com/platform/manifest -b jb-dev
7) When prompted, enter your real name and email address.
8) Gather the files:
Code:
$ repo sync
9) Compiling:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
10) Issue:
Code:
$ lunch
11) Pick your poison.
12) Now issue (The '#' is the number of cores your processor has plus 1, ex. I have a dual core processor so I type 'make -j3':
Code:
$ make -j#
~How To Add A Device To The List~
1) Find the github for your device you wish to add. (For me it is the HTC Evo 3D CDMA)
2) Now navigate to the location you are going clone the device tree to:
Code:
$ cd WORKING_DIRECTORY/device
$ mkdir htc
3) Clone the github device tree from remote to local: (The shooter would be whatever you want that folder to be named so make sure it is whatever standard name would be for your device, example: Nexus One [passion], Nexus S [crespo], Motorola Droid [sholes], HTC Incredible [inc], etc.)
Code:
$ git clone git://github.com/CyanogenMod/android_device_htc_shooter.git shooter
4) Now navigate into the folder:
Code:
$ cd shooter
5) Connect phone to computer and make sure USB debugging is enabled and you have adb set up.
6) Extract Device Proprietary Files:
Code:
$ ./extract-files.sh
7) Navigate back to your home directory for building:
Code:
$ cd ~/WORKING_DIRECTORY
8) Prepare To Compile:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
9) Get your list of devices:
Code:
$ lunch
10) Pick your poison.
11) Now compile:
Code:
$ make -j#
Or for a flashable zip:
Code:
$ make -j# otapackage
~NOTE~
If you are running into issues such as:
Code:
Which would you like? [full-eng] 5
build/core/product_config.mk:209: *** No matches for product "full_shooter". Stop.
Device shooter not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Repository for shooter not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifest.xml.
build/core/product_config.mk:209: *** No matches for product "full_shooter". Stop.
** Don't have a product spec for: 'full_shooter'
** Do you have the right repo manifest?
What you need to do is to edit your blob to match the PRODUCT_NAME to the file name. For example with mine I have full_shooter.mk therefore in this file I need to have PRODUCT_NAME to match it. Whatever error it is looking for you just need to change the PRODUCT_NAME line to match what the error shows.
Source​
Hope it helps for our development, and again, if u know how to do that, please try
Click to expand...
Click to collapse

luiseteyo said:
Hey there! I know the current situation in the i9003. We have a functional but not full ICS and now we need kernel 3.X to make everything work perfectly. Dhiru is working hard, he made a very very good work but he cannot do more until hillbeast finishes a bootable 3.0 kernel. A few hours ago, JB Source Code was released and now it can be compiled from source. I have read a good tutorial made by dastin1015 which explains how to do that. I say THIS IS NOT MY WORK (obviously) so credits go for him.
If somebody knows how to do that, please, try it. Probably we will be saving a lot of time for further development. Only to make it boot in a i9003 is a big step and a big contribution for the community. Here are the steps:
GUIDE - HOW TO COMPILE JB ON UBUNTU FROM SOURCE​
To compile Jellybean on Ubuntu I'm going to first give you steps to set up your computer to get this thing rolling. Also note that this appears to be a development preview source code.
This will NOT make a fully functional ROM, but will give you a place to start. Also I CANNOT fix every error you run into.
Note: The source download is approximately 6GB in size. You will need 25GB free to complete a single build, and up to 80GB (or more) for a full set of builds.
1) You need the following:
-JDK 6 if you wish to build Jellybean. You can download it from java.sun.com. Or:
Code:
$ sudo apt-get install sun-java6-jdk
-Python 2.4 -- 2.7, which you can download from python.org. Or:
Code:
$ sudo apt-get install python
-Git 1.7 or newer. You can find it at git-scm.com. Or:
Code:
$ sudo apt-get install git-core
2) Install required packages. 64-bit (recommended)
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils
On newer versions of Ubuntu such as 11.10 you may need to do the following:
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
Building on Ubuntu 12.04 is currently only experimentally supported and is not guaranteed to work on branches other than master.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
3) Configure your USB.
Code:
$ gksudo gedit /etc/udev/rules.d/51-android.rules
Inside of this blank text file insert:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
4) Save the file and close it and then issue this command:
Code:
$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
5) Install the repo:
Code:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
6) Initialize the repo:
Code:
$ mkdir WORKING_DIRECTORY
$ cd WORKING_DIRECTORY
$ repo init -u https://android.googlesource.com/platform/manifest -b jb-dev
7) When prompted, enter your real name and email address.
8) Gather the files:
Code:
$ repo sync
9) Compiling:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
10) Issue:
Code:
$ lunch
11) Pick your poison.
12) Now issue (The '#' is the number of cores your processor has plus 1, ex. I have a dual core processor so I type 'make -j3':
Code:
$ make -j#
~How To Add A Device To The List~
1) Find the github for your device you wish to add. (For me it is the HTC Evo 3D CDMA)
2) Now navigate to the location you are going clone the device tree to:
Code:
$ cd WORKING_DIRECTORY/device
$ mkdir htc
3) Clone the github device tree from remote to local: (The shooter would be whatever you want that folder to be named so make sure it is whatever standard name would be for your device, example: Nexus One [passion], Nexus S [crespo], Motorola Droid [sholes], HTC Incredible [inc], etc.)
Code:
$ git clone git://github.com/CyanogenMod/android_device_htc_shooter.git shooter
4) Now navigate into the folder:
Code:
$ cd shooter
5) Connect phone to computer and make sure USB debugging is enabled and you have adb set up.
6) Extract Device Proprietary Files:
Code:
$ ./extract-files.sh
7) Navigate back to your home directory for building:
Code:
$ cd ~/WORKING_DIRECTORY
8) Prepare To Compile:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
9) Get your list of devices:
Code:
$ lunch
10) Pick your poison.
11) Now compile:
Code:
$ make -j#
Or for a flashable zip:
Code:
$ make -j# otapackage
~NOTE~
If you are running into issues such as:
Code:
Which would you like? [full-eng] 5
build/core/product_config.mk:209: *** No matches for product "full_shooter". Stop.
Device shooter not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Repository for shooter not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifest.xml.
build/core/product_config.mk:209: *** No matches for product "full_shooter". Stop.
** Don't have a product spec for: 'full_shooter'
** Do you have the right repo manifest?
What you need to do is to edit your blob to match the PRODUCT_NAME to the file name. For example with mine I have full_shooter.mk therefore in this file I need to have PRODUCT_NAME to match it. Whatever error it is looking for you just need to change the PRODUCT_NAME line to match what the error shows.
Source​
Click to expand...
Click to collapse
Nice efforts! Liked!! You should continue maybe you can be the 1st dev of JB ^^

EDIT: Nevermind.

Anybody is going to try this? Almost all the big devices have a start build of JB. I can't do this so, isnt here any developer who wants to try this?

luiseteyo said:
Anybody is going to try this? Almost all the big devices have a start build of JB. I can't do this so, isnt here any developer who wants to try this?
Click to expand...
Click to collapse
Altough I'm not this device user, but i'm setting up my PC to start building for my LG-P500
And I must say that this is really a very helpful and the easiest guide available apart from the errors I'm going to face while building

luiseteyo said:
Anybody is going to try this? Almost all the big devices have a start build of JB. I can't do this so, isnt here any developer who wants to try this?
Click to expand...
Click to collapse
dhiru1602 said:
CM10 boots. Needs more testing.
Everything as that of CM9 seem to work fine with the only problem being the space on the system partition. It's too low to accommodate the full ROM and Jellybean Google apps. With the release of 3.0 kernel, we will resize the partitions, but as of now I have moved the applications to the data partition on a temporary basis.
Will make a release in a separate thread by the next few days.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=29018786&postcount=2809

shriomman said:
http://forum.xda-developers.com/showpost.php?p=29018786&postcount=2809
Click to expand...
Click to collapse
Yes i know
Sent from my iPad using Tapatalk HD

Workaround for repo syntax errors
For those getting a syntax error on
Code:
repo init
It's because of Python3 being listed as Python in /usr/bin.
A temporary workaround is to symlink python2 in place of python 3.
Code:
$ mkdir ~/bin
$ ln -s /usr/bin/python2 ~/bin/python
$ export PATH=~/bin:$PATH
Check to see if it worked
Code:
$ which python
And if it returns the binary in ~/bin/python it worked
The solution would either be to symlink python by default or rewrite repo in Python3.

[Tutorial][S4] How to make your very own Jellybean 4.1.1 on the HTC One S!

Hello everyone! I am anxiously awaiting jellybean for our phone and I know that many of you are also, so I decided to make this thread and help speed things up ! I am currently watching my repo sync so I am hard at work developing this for us but other users can work to, so we get it done faster . So if you are not on ubuntu 10 or 11, LEAVE because this is likely not going to work for you . A few things first: 1. the "$" is an indication of the command, there is one $ before every command and it is already in your terminal so do not type it. 2. You may want to copy and paste commands... 3. This will either not boot or have many bugs, as expected.
There are currently 2 JB roms available, here (by me) and here (by djsubtronic)
GENERAL JELLYBEAN THREAD IS HERE
1) First thing is first, install the required packages:
Open terminal and KEEP IT OPEN FOR ALL OF THIS!!!!!!!!!!!!
Code:
$ sudo apt-get install openjdk-6-jdk
$ sudo apt-get install python
$ sudo apt-get install git-core
Next, download the android sdk for linux and extract it to your home directory. Name it "android-sdk" (without the quotes) for simplicity. In you home folder, show the hidden files (hit Ctrl + H). Open the .bashrc file in the text editor. Add the following lines at the bottom (end) of it:
Code:
# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin
Save it and then go back to the home folder. Edit the .profile file and add this to the end:
Code:
PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"
You now have the sdk installed. In your terminal, enter:
Code:
$ cd android-sdk
$ android
When the sdk manager pops up, download platform-tools, and update the tools folder if needed.
If it does not pop up, try one the following 3 commands and see if it does:
Code:
$ cd tools
$ android
Or
Code:
$ cd platfrom-tools
$ android
Code:
$ cd
$ android
And if none of those bring up the manager, close your terminal window. Then open terminal and type:
Code:
$ android
MORE FILES?!?!?! Yes.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Finally! Past the downloads (for now... wait for the repo sync)
2) Configure the usb:
Code:
$ gksudo gedit /etc/udev/rules.d/51-android.rules
In the blank text field, paste the following:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
Save the new text file and close it. Enter this command in your terminal window:
Code:
$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
3) Installing the repo:
Code:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
4) Initialize (init) the repo:
Code:
$ mkdir WORKING_DIRECTORY
$ cd WORKING_DIRECTORY
$ repo init -u https://android.googlesource.com/platform/manifest -b android-4.1.1_r1
or, if you want to do CM10, replace the last line (repo init -u blahblahblah) with:
Code:
$ repo init -u git://github.com/CyanogenMod/android.git -b jellybean
4.5) If you already have the repo initialized and all of the above done, and are just starting over, do this:
Code:
$ cd WORKING_DIRECTORY
$ repo init -b android-4.1.1_r1
$ repo sync
Don't do it if you are starting new.
5) Sync the needed files (repo)
Code:
$ repo sync -j1
When it asks, enter your REAL name and email
6) Compile:
Code:
$ source build/envsetup.sh
or
Code:
$ . build/envsetup.sh
7) Who's hungry?
Code:
$ lunch
Seriously, you have to!
8) Adding HTC One S (ville) to the list
Code:
$ cd WORKING_DIRECTORY/device
$ mkdir htc
$ cd htc
9) I have no name for this (github sync )
Code:
$ git clone git://github.com/intervigilium/android_device_htc_ville.git -b jellybean-ril ville
or
Code:
$ git clone git://github.com/intervigilium/android_device_htc_ville.git -b jellybean ville
10) Navigate to "ville"
Code:
$ cd ville
11) Connect your HTC One S to the computer and verify that adb is working (usb debugging) and once that is verified do this:
Code:
$ ./extract-files.sh
You can disconnect after this is done.
11.5) Every .cpp file in device/htc/ville/libsensors needs these lines to be added after the #includes section:
Code:
#define LOGE
#define LOGE_IF
The following lines must be added to /device/htc/ville/liblights/lights.c after the #includes section:
Code:
#define LOGE
#define LOGE_IF
#define LOGV
(Thanks to djsubtronic for this step!)
12) Time to build!
Code:
$ cd ~/WORKING_DIRECTORY
then:
Code:
$ source build/envsetup.sh
or
Code:
$ . build/envsetup.sh
13) Verify the ville is there:
Code:
$ lunch
14) Choose from the list
15) Compile!
The # stand for the number of cores plus one (Example: my VAIO has 2 cores so I do -j3, if it were quad core I would do -j5)
Code:
$ make -j#
Flashable zip command (instead of above command):
Code:
$ make -j# otapackage
Thanks to dastin1015 for this (Look at it for a general build): http://forum.xda-developers.com/showthread.php?t=1762641
Thanks to everyone with a ville github account!
Post your results in this thread. Also, ask questions here too!
If I have done something wrong, just tell me politely what it is and I will fix it. It is late here and this is a long thread so there is likely at least one mistake. Thanks!
ERRORS AND FIXES:
Code:
build/core/product_config.mk:205: *** No matches for product "device_ville". Stop.
** Don't have a product spec for: 'device_ville'
** Do you have the right repo manifest?
Add this:
Code:
PRODUCT_NAME := device_ville
PRODUCT_DEVICE := ville
PRODUCT_BRAND := Android
PRODUCT_MODEL := Full Android on ville
to the bottom (end) of device_ville.mk
Ville does not show up in lunch menu? Make the file "vendorsetup.sh". Edit it and add this:
Code:
add_lunch_combo device_ville-userdebug

Nice
Enviado desde mi HTC One S usando Tapatalk 2

Reserved for fixes and updates

Nice one.
You can add that every .cpp file in device/htc/ville/libsensors needs these lines to be added after the #includes section:
Code:
#define LOGE
#define LOGE_IF

djsubtronic said:
Nice one.
Click to expand...
Click to collapse
I'll post pictures tomorrow or the next day

djsubtronic said:
Nice one.
You can add that every .cpp file in device/htc/ville/libsensors needs these lines to be added after the #includes section:
Code:
#define LOGE
#define LOGE_IF
Click to expand...
Click to collapse
How would I say that (under what step do you recommend)

BiteBlaze said:
How would I say that (under what step do you recommend)
Click to expand...
Click to collapse
Needs to be done before make, so I would say just before the build steps.

djsubtronic said:
Needs to be done before make, so I would say just before the build steps.
Click to expand...
Click to collapse
I'll add that now

I won't be able to post pictures until monday so if anyone has screenshots of the terminal window at certain points in the instructions, email me. Goodnight and good luck!

Has anybody tried doing this?

Reviewers said:
Has anybody tried doing this?
Click to expand...
Click to collapse
There is a check the general sections topic on Jelly Bean. There are plenty of people trying. The only one with a booting build thus far is Team Liquid's Nocoast.

Why doesn't it work on ubuntu 10.04?

Add to OP after the libsensors bit:
The following lines must be added to /device/htc/ville/liblights/lights.c after the #includes section
Code:
#define LOGE
#define LOGE_IF
#define LOGV
---------- Post added at 12:31 PM ---------- Previous post was at 12:03 PM ----------
Stuck on this:
in function wpa_driver_nl80211_ops:driver_nl80211.c(.data.rel. ro.wpa_driver_nl80211_ops+0x1c8): error: undefined reference to 'wpa_driver_nl80211_driver_cmd'
Added this line to device/htc/ville/BoardConfig.mk: BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_wl12xx
and then got another error...
make: *** No rule to make target `out/target/product/ville/obj/STATIC_LIBRARIES/lib_driver_cmd_wl12xx_intermediates/lib_driver_cmd_wl12xx.a', needed by `out/target/product/ville/obj/EXECUTABLES/wpa_supplicant_intermediates/LINKED/wpa_supplicant'. Stop.
How to get that file?

Alie360 said:
Why doesn't it work on ubuntu 10.04?
Click to expand...
Click to collapse
It does. It doesn't work on 12
~ BiteBlaze via HTC One S... If I have helped you out, hit the Thanks button

BiteBlaze said:
It does. It doesn't work on 12
~ BiteBlaze via HTC One S... If I have helped you out, hit the Thanks button
Click to expand...
Click to collapse
You wrote "So if you are not on ubuntu 10 or 11, LEAVE because this is likely not going to work for you "...
I was assuming it was working only on 12

Alie360 said:
You wrote "So if you are not on ubuntu 10 or 11, LEAVE because this is likely not going to work for you "...
I was assuming it was working only on 12
Click to expand...
Click to collapse
Haha ok I get it you had it backwards. I mean that only people on 10 or 11 can do this ("If you are NOT on ubuntu 10 or 11, this is likely not going to work for you)

djsubtronic said:
Add to OP after the libsensors bit:
The following lines must be added to /device/htc/ville/liblights/lights.c after the #includes section
Code:
#define LOGE
#define LOGE_IF
#define LOGV
---------- Post added at 12:31 PM ---------- Previous post was at 12:03 PM ----------
Stuck on this:
in function wpa_driver_nl80211_ops:driver_nl80211.c(.data.rel. ro.wpa_driver_nl80211_ops+0x1c8): error: undefined reference to 'wpa_driver_nl80211_driver_cmd'
Added this line to device/htc/ville/BoardConfig.mk: BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_wl12xx
and then got another error...
make: *** No rule to make target `out/target/product/ville/obj/STATIC_LIBRARIES/lib_driver_cmd_wl12xx_intermediates/lib_driver_cmd_wl12xx.a', needed by `out/target/product/ville/obj/EXECUTABLES/wpa_supplicant_intermediates/LINKED/wpa_supplicant'. Stop.
How to get that file?
Click to expand...
Click to collapse
Added to the OP. Did you find the file?

BiteBlaze said:
Added to the OP. Did you find the file?
Click to expand...
Click to collapse
I undid the change from BoardConfig.mk
http://translate.google.co.uk/trans...a=X&ei=crACUOCNFOeY1AXcxNWzBw&ved=0CHAQ7gEwCQ
That link has a link to a git that has drivers for the nl80211, wpa_supplicant, and hostapd. Trying to get it to work using those files.

djsubtronic said:
I undid the change from BoardConfig.mk
http://translate.google.co.uk/trans...a=X&ei=crACUOCNFOeY1AXcxNWzBw&ved=0CHAQ7gEwCQ
That link has a link to a git that has drivers for the nl80211, wpa_supplicant, and hostapd. Trying to get it to work using those files.
Click to expand...
Click to collapse
Good. I will try tomorrow. I am glad to say they are upgrading my internet to about 15MBs! I should get a good build on monday

villainhalf said:
There is a check the general sections topic on Jelly Bean. There are plenty of people trying. The only one with a booting build thus far is Team Liquid's Nocoast.
Click to expand...
Click to collapse
I think I will post a link to the general thread in the OP. Nocoast refuses to release it or give us any more info... hopefully some info comes today... maybe screenshots? Or hopefully what the issues are and maybe a logcat

[GUIDE][ROM][S4] How to build your own Baked BlackBean ROM! [AOSP 4.2.1][NOOB-PROOF]

How to compile your own Baked ROM (jb-4.2 branch)​
I have decided to create a guide on how to build your own Baked Blackbean ROM for the HTC One S. I will make this as simple as possible, so even people with no previous knowledge of Linux can follow this tutorial successfully. The ROMs that you compile are for your personal use only...please do not share or post them to show courtesy to TeamBaked. If you have any questions or have any trouble during any part of this tutorial, feel free to post them and I will try to get you sorted out.
I've tried to make this guide as comprehensive as possible, explaining what each step does. It should be fairly thorough and easy enough for anyone with a bit of patience to build.
Click to expand...
Click to collapse
Requirements:
patience (this is the most important)
Ubuntu 12.04 64bit, dual-booted or virtual machine
some space on your Ubuntu partition, I'd say about 50GB to be very safe
an internet connection
Step 1: Setting up your environment
1) You need to install the required packages for compiling AOSP. Open up a terminal, and type this in:
Code:
sudo apt-get install git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.8-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev openjdk-6-jre openjdk-6-jdk pngcrush schedtool g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline-gplv2-dev gcc-4.5-multilib g++-4.5-multilib libxml2-utils libxml2 xsltproc
Lastly:
Code:
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
OPTIONAL STEPS (Good if you want to do more Android development in the future)
Let's configure our USB access.
Code:
gksudo gedit /etc/udev/rules.d/51-android.rules
A text editor should pop up with a blank file. Copy and paste this to the file:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
Save and close the file. Now do this to change its permissions:
Code:
sudo chmod a+r /etc/udev/rules.d/51-android.rules
2) Now we will need to download the Android SDK and set it up properly.
Download the SDK here: http://developer.android.com/sdk/index.html
Extract the archive to your home directory and name it android-sdk
In your home folder, press CTRL + H to show hidden files.
Open up your .bashrc and paste this at the end:
Code:
# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin
Open .profile and put this at the end as well:
Code:
PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"
The SDK has now been setup properly. You can type
Code:
android
in terminal to bring up the SDK menu and install tools/packages if you want.
Step 2: Getting the source downloaded
1) Installing repo and syncing the repository.
Open a new terminal window and type this in:
Code:
mkdir ~/bin
PATH=~/bin:$PATH
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
chmod a+x ~/bin/repo
Now let's initialize the Baked repo. I am creating a folder name "baked" which is where I will download the source to.
Code:
mkdir baked
cd baked
repo init -u https://github.com/TeamBAKED/platform_manifest.git -b jb-4.2
Let's download the source.
Code:
repo sync -j#
The '#' refers to how many simultaneous jobs you want. I usually do -j16 since I have fast fiber-optic internet, so my command would be "repo sync -j16".
Now the source is downloading. You can leave your computer alone until it is done.
Step 3: Adding in configurations for ville.
This step is NOT needed anymore, because the One S has been merged into official BAKED. Skip ahead to step 4! :victory:
Because TeamBaked doesn't officially support the One S, we will have to add in the parts for ville manually and ensure buildability. I have pre-made everything, so there is really nothing you need to do on your part. You just need to download the parts and place them in their correct directories.
1) We need to first add a local_manifest.xml so we can integrate the projects needed for ville during repo sync. Luckily, I have already prepared one. In baked/.repo/ create a file named "local_manifest.xml", and paste this in:
Code:
Save and close. Then do another
Code:
repo sync -j#
so we can now fetch the additional ville-related parts. The manifest tracks the CM10.1 repos for the kernel and msm8960 common stuff, but the device tree that it tracks is from my Github because I have modified it for the Baked ROM. I'll try and keep it as updated as the CM10.1 device tree as development continues.
2) Now we need another config file, which tells the build system what to execute and which device-specific parameters to be set. Go into baked/vendor/baked/products/ and create a file named "ville.mk". Paste this in:
Code:
# Inherit AOSP device configuration for ville.
$(call inherit-product, device/htc/ville/device_ville.mk)
# Inherit common product files.
$(call inherit-product, vendor/baked/configs/common.mk)
# Inherit GSM common stuff
$(call inherit-product, vendor/baked/configs/gsm.mk)
# Setup device specific product configuration.
PRODUCT_NAME := baked_ville
PRODUCT_BRAND := HTC
PRODUCT_DEVICE := ville
PRODUCT_MODEL := HTC One S
PRODUCT_MANUFACTURER := HTC
PRODUCT_BUILD_PROP_OVERRIDES += PRODUCT_NAME=htc_ville BUILD_FINGERPRINT=tmous/ville/ville:4.0.4/IMM76D/96068.7:user/release-keys PRIVATE_BUILD_DESC="=2.35.531.7 CL96068 release-keys" BUILD_NUMBER=96068
# bootanimation
PRODUCT_COPY_FILES += \
vendor/baked/prebuilt/bootanimation/bootanimation_540_960.zip:system/media/bootanimation.zip
Now open up AndroidProducts.mk. We need to tell it to call the configuration file that you just created. Add in
Code:
$(LOCAL_DIR)/ville.mk \
right after vibrantmtd. So the whole file should look something like this (at the time of writing, YMMV):
Code:
PRODUCT_MAKEFILES := \
$(LOCAL_DIR)/captivatemtd.mk \
$(LOCAL_DIR)/crespo.mk \
$(LOCAL_DIR)/crespo4g.mk \
$(LOCAL_DIR)/d2att.mk \
$(LOCAL_DIR)/d2mtr.mk \
$(LOCAL_DIR)/d2spr.mk \
$(LOCAL_DIR)/d2tmo.mk \
$(LOCAL_DIR)/d2usc.mk \
$(LOCAL_DIR)/d2vzw.mk \
$(LOCAL_DIR)/endeavoru.mk \
$(LOCAL_DIR)/fascinatemtd.mk \
$(LOCAL_DIR)/galaxysmtd.mk \
$(LOCAL_DIR)/i9300.mk \
$(LOCAL_DIR)/grouper.mk \
$(LOCAL_DIR)/maguro.mk \
$(LOCAL_DIR)/mako.mk \
$(LOCAL_DIR)/manta.mk \
$(LOCAL_DIR)/mesmerizemtd.mk \
$(LOCAL_DIR)/p3113.mk \
$(LOCAL_DIR)/p5wifi.mk \
$(LOCAL_DIR)/toro.mk \
$(LOCAL_DIR)/tf201.mk \
$(LOCAL_DIR)/tf300t.mk \
$(LOCAL_DIR)/tf700t.mk \
$(LOCAL_DIR)/toroplus.mk \
$(LOCAL_DIR)/showcasemtd.mk \
$(LOCAL_DIR)/stingray.mk \
$(LOCAL_DIR)/vibrantmtd.mk \
[COLOR="Red"][B]$(LOCAL_DIR)/ville.mk \[/B][/COLOR]
$(LOCAL_DIR)/wingray.mk
Step 4: Actually building. FInally!
1) Open a terminal, and navigate to the baked/ directory.
2) Type this:
Code:
cp external/kernel-headers/original/sound/asound.h prebuilts/gcc/linux-x86/host/i686-linux-glibc2.7-4.6/sysroot/usr/include/sound/
You will run into errors if you don't copy over that kernel header. AOSP Jelly Bean glibc sysroot seems to include an asound.h that relies on uint32t which isn't (normally) defined.
3) Type:
Code:
. build/envsetup.sh
lunch
4) You will be brought up with a menu that looks something like this:
Code:
You're building on Linux
Lunch menu... pick a combo:
1. mini_armv7a_neon-userdebug
2. mini_armv7a-userdebug
[B][COLOR="Red"]3. baked_ville-userdebug[/COLOR][/B]
4. full_panda-userdebug
5. baked_toro-userdebug
6. baked_maguro-userdebug
7. baked_mako-userdebug
8. baked_manta-userdebug
9. baked_toroplus-userdebug
10. baked_crespo-userdebug
11. baked_crespo4g-userdebug
12. baked_grouper-userdebug
13. baked_captivatemtd-userdebug
14. baked_d2att-userdebug
15. baked_d2mtr-userdebug
16. baked_d2spr-userdebug
17. baked_d2tmo-userdebug
18. baked_d2usc-userdebug
19. baked_d2vzw-userdebug
20. baked_endeavoru-userdebug
21. baked_fascinatemtd-userdebug
22. baked_galaxysmtd-userdebug
23. baked_i9300-userdebug
24. baked_mesmerizemtd-userdebug
25. baked_p3113-userdebug
26. baked_p5wifi-userdebug
27. baked_showcasemtd-userdebug
28. baked_stingray-userdebug
29. baked_tf201-userdebug
30. baked_tf300t-userdebug
31. baked_tf700t-userdebug
32. baked_vibrantmtd-userdebug
33. baked_wingray-userdebug
Which would you like? [full-eng]
See that baked_ville-userdebug is at number 3. So type in '3' or whatever the corresponding number is.
4) Now wait a minute or two (depending on how fast your computer is) as it calls the makefiles and sets up your build system.
5) When the 'lunch' has finished, you should see something like this:
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.2.1
TARGET_PRODUCT=baked_ville
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_[email protected]_3.20GHz-with-gentoo-2.1
HOST_BUILD_TYPE=release
BUILD_ID=JOP40D
OUT_DIR=/home/klin1344/baked/out
============================================
Now type in
Code:
mka bacon -j#
and the build process will begin! Again, here the -j# is an option on how many simultaneous jobs you want. It's common to use a number between 1 and 2 times the number of hardware threads on the computer being used for the build.
5) When the build is done, you should get a package in baked/out/target/product/ville/.
6) Flash and enjoy!!
Updating / Re-building
Always do a full clean when you want to update your build.
1) Clean out the previous build(s).
Code:
rm -rf out
2) Sync up the repo to get the latest changes.
Code:
repo sync -j#
3) Follow the tutorial again starting from Step 4.

Troubleshooting
Troubleshooting​
Coming soon.

one more just in case.

I was just thinking about this since they wouldn't let you share blackbean 7. Thanks
Sent from my HTC One S using Tapatalk 2

thanks man, to bad you stop developing this;
baked blackbean made by you it's still the best ROM out here in it branch;
their are definitely good at it and also your build from baked6 is way in front of others
to bad we'll never have an (un)official build from baked7 made by profs

I've been thinking about trying to build from source.
But I don't meet the first requirement.
Thanks for the guide! Good work as usual.
Sent from my HTC One S using Tapatalk 2

Thanks a lot klin. Since blackbean 6 was best rom I had on my htc one s and you cannot give out the new version anymore I was thinking about building that rom on my own for the first time. But I didn't know how. I will definetly use that tutorial. I cannot understand why teambaked is so awkward.

I'm back, and I'm going to finish this guide right now. Glad to see that people are looking forward to this and that it'll help quite a few who want to build for themselves.
Sent from my SGH-T999 using Tapatalk 2

Guide is finished and up! If you guys run into ANY errors, feel free to post in the thread and I'll do my best to help you out. Happy building!

klin1344 said:
Guide is finished and up! If you guys run into ANY errors, feel free to post in the thread and I'll do my best to help you out. Happy building!
Click to expand...
Click to collapse
[email protected]:~$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
ln: failed to create symbolic link `/usr/lib/i386-linux-gnu/libGL.so': File exists

essentialmindz said:
[email protected]:~$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
ln: failed to create symbolic link `/usr/lib/i386-linux-gnu/libGL.so': File exists
Click to expand...
Click to collapse
This means that creating a symlink failed because the file already exists. You can just skip this step as there is no need to symlink if the file is there.
Sent from my SGH-T999 using Tapatalk 2

Very detailed and accurate... Thanks for the time you took writing this... Great job.. This makes me wanna build from source again..
Sent from my HTC One S using xda premium

$droyd$ said:
Very detailed and accurate... Thanks for the time you took writing this... Great job.. This makes me wanna build from source again..
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
droyd, are you perhaps thinking about building this ROM?

Jeez, klin1344! You're THE MAN! I was devastated when the BBB download link was pulled cause I didn't download it in time! This guide of yours is a GREAT initiative and I for one will be following it in the next few days! :good::good::laugh:

Is this going to work for villec2 (S3)??
Sent from my HTC One S using xda app-developers app

mteezey said:
I was just thinking about this since they wouldn't let you share blackbean 7. Thanks
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
This is ridiculous, they never said he couldn't share Blackbean 7, they only asked that he not share before they shared! It has not been officially released on any device by teambaked why is this such a sin? I don't understand. I think it's just pure respect and self discipline. I want Blackbean 7 on HTC One S just as much as the rest of us but they simply have chosen not to release it til they are ready. I think it's crazy to think we can have it here before any official builds. We don't have to be mad. They gave permission.
Anyway Thanks for the guide, it is a great offering to help us.

luxandroid said:
Is this going to work for villec2 (S3)??
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
I don't think so, because there is no cm10 for the c2
Gesendet von meinem Nexus 7 mit Tapatalk 2

CrayzyBoy said:
I don't think so, because there is no cm10 for the c2
Gesendet von meinem Nexus 7 mit Tapatalk 2
Click to expand...
Click to collapse
yeah but who knows maybe with some corrections...just wondering...

many thanks klin, you're the best
I'll give it a chance this week, as I'll have some spare time in a few days

LibertyMonger said:
This is ridiculous, they never said he couldn't share Blackbean 7, they only asked that he not share before they shared! It has not been officially released on any device by teambaked why is this such a sin? I don't understand. I think it's just pure respect and self discipline. I want Blackbean 7 on HTC One S just as much as the rest of us but they simply have chosen not to release it til they are ready. I think it's crazy to think we can have it here before any official builds. We don't have to be mad. They gave permission.
Anyway Thanks for the guide, it is a great offering to help us.
Click to expand...
Click to collapse
I get where you coming from but team Baked had the same issue before and they went about it in a lame way which they did again so that's why some are not happy with it and you got the fact this site about sharing work.
Think I have to give this a try but guess I better give more space to Linux lol.

[Pantech Burst] [Guide] Build your own AOKP_JB Rom

You must be running a 64bit version of Ubuntu.
If you attempt to build with 32bit I will not help as it is not supported.
This will NOT make a fully functional ROM, but will give you a place to start. Also I CANNOT fix every error you run into.
READ the entire OP and make sure to properly follow instructions. Don't forget to search the thread as your question may have already been answered.
Please use http://pastebin.com/ for all errors you run into. Posting a link is much easier than a long list of errors in the thread. Thank you.
You will need 25GB (or more) free to complete a single build, and up to 80GB (or more) for a full set of builds.
1) You need the following:
-JDK 6 if you wish to build Jellybean.
Code:
$ sudo apt-get install openjdk-6-jdk
-Python 2.4 -- 2.7, which you can download from python.org. Or:
Code:
$ sudo apt-get install python
-Git 1.7 or newer. You can find it at git-scm.com. Or:
Code:
$ sudo apt-get install git-core
-Java ™ SE Runtime Environment (build 1.6.0_37-b06)
-Android SDK:
Download the SDK here: http://developer.android.com/sdk/index.html
Extract the SDK and place it in your home directory.
I renamed my SDK to android-sdk to make it easier to navigate to.
Go to your home folder, press Ctrl+H to show hidden files, and open up your .bashrc file.
Add these lines at the bottom of the file:
Code:
# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin
Find your .profile file and add this at the bottom of the file:
Code:
PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"
You have now successfully installed the Android SDK.
To check for updates issue this into your terminal:
Code:
$ android
2) Install required packages.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline-gplv2-dev schedtool lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils
On newer versions of Ubuntu such as 11.10 you may need to do the following:
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
Building on Ubuntu 12.04 is currently only experimentally supported and is not guaranteed to work on branches other than master.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386 \
pngcrush optipng
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
3) Configure your USB.
Code:
$ gksudo gedit /etc/udev/rules.d/51-android.rules
Inside of this blank text file insert:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
4) Save the file and close it and then issue this command:
Code:
$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
5) Install the repo:
Code:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
Create the following directories for where the AOKP repo will be stored and synced
Code:
mkdir ~/android
mkdir ~/android/aokp_jb
Move to our new AOKP directory
Code:
cd ~/android/aokp_jb
Initialize the AOKP repo and download the manifest
Code:
repo init -u git://github.com/AOKP/platform_manifest.git -b jb
Sync AOKP source
Code:
repo sync
Sit and wait for a long time. Nearing 10GB of source code now.
Open the aokp_jb_prestofiles.zip file and copy the contents to the following
Code:
aokp_jb/vendor/aokp/products/AndroidProducts.mk
aokp_jb/vendor/aokp/products/presto.mk
aokp_jb/.repo/manifest.xml
go back to ~/android/aokp_jb/
Sync source to pull files from TeamPresto and any changes to either aokp or TeamPresto's Github
Code:
repo sync
Start the build
This is probably the EASIEST part of all, simply copy/paste this command and walk away!
Code:
. build/envsetup.sh && brunch presto
Syncing the repo is dependent upon your Internet connection. It can take anywhere from 30 minutes to several hours to fully sync. Same thing goes for build times. Don't expect this to be short. If you have patience and have no build errors, you'll end up with a flashable zip in ~/aokp_jb/out/target/product/presto! Happy crack-flashing!

[Reserved]
Thank you goes to AOKP Team, Rootswiki, TeamPresto, and everyone else who's contributed.

kagedws6 said:
[Reserved]
Thank you goes to AOKP Team, Rootswiki, TeamPresto, and everyone else who's contributed.
Click to expand...
Click to collapse
**edit** at the moment this will build a bootable rom that is crazy fast but does not have access to wifi or the radio. still in progress

kagedws6 said:
**edit** at the moment this will build a bootable rom that is crazy fast but does not have access to wifi or the radio. still in progress
Click to expand...
Click to collapse
Well when I get home I will help with this. WE SHALL HAVE THE AOKP. And I realize that I have to back up all my windows stuff.......... To do a full install. Instead of dual boot. My hdd isn't big enough Lol.

hi
Is there a compiled .zip file that i can download because i don't have ubuntu, but i really want jb on m pantech burst.
Thanks

mustafa.ali61 said:
Is there a compiled .zip file that i can download because i don't have ubuntu, but i really want jb on m pantech burst.
Thanks
Click to expand...
Click to collapse
We are still getting the bugs worked out. This page is primarily for people who want to learn to build aokp from scratch and its got setup information to pull from the 3 github folders we are currently modifying to get everything working. right now wifi and data works but we are working on being to answer calls at the moment. any builds now would not be usable on a daily basis

[DEV] - Compile Unofficial CM10 for Pantech Flex

To compile Unofficial CyanogenMod for Pantech Flex P8010 (oscar), following the next steps.
1º - Prepare the Build Environment:
This step is based on the following tutorial: [Tutorial] Compile JB on Ubuntu - Thanks dastin1015.
A) Install Python and Git:
Code:
$ sudo apt-get install python
Code:
$ sudo apt-get install git-core
B) Install Android SDK:
- Download the SDK here: http://developer.android.com/sdk/index.html
- Extract the SDK and place it in your home directory.
- I renamed my SDK to android-sdk to make it easier to navigate to.
- Go to your home folder, press Ctrl+H to show hidden files, and open up your .bashrc file.
- Add these lines at the bottom of the file:
Code:
# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin
- Find your .profile file and add this at the bottom of the file:
Code:
PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"
You have now successfully installed the Android SDK.
To check for updates issue this into your terminal:
Code:
$ android
C) Install required packages:
Building on Ubuntu 10.10/11.10:
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils xsltproc
On Ubuntu 10.10:
Code:
$ sudo ln -s /usr/lib32/mesa/libGL.so.1 /usr/lib32/mesa/libGL.so
On Ubuntu 11.10:
Code:
$ sudo apt-get install libx11-dev:i386
On newer versions of Ubuntu such as 11.10 you may need to do the following:
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so
Building on Ubuntu 12.04/10:
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386 \
pngcrush optipng
Code:
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
D) Install Oracle Java 6:
To install Oracle Java 6 in Ubuntu via PPA: http://www.webupd8.org/2012/11/oracle-sun-java-6-installer-available.html
Code:
$ sudo add-apt-repository ppa:webupd8team/java
$ sudo apt-get update
$ sudo apt-get install oracle-java6-installer
After the installation, check the version of java, using the command:
Code:
$ java -version
Output console:
Code:
java version "1.6.0_38"
Java(TM) SE Runtime Environment (build 1.6.0_38-b05)
Java HotSpot(TM) 64-Bit Server VM (build 20.13-b02, mixed mode)
Note: The installed version of java, may have been updated, but should be kept in version 1.6.XX
Verify the symlinks:
Code:
$ ls -la /etc/alternatives/java* && ls -la /etc/alternatives/jar
Output console:
Code:
lrwxrwxrwx 1 root root 39 ene 17 08:02 /etc/alternatives/java -> /usr/lib/jvm/java-6-oracle/jre/bin/java
lrwxrwxrwx 1 root root 45 ene 17 08:02 /etc/alternatives/java.1.gz -> /usr/lib/jvm/java-6-oracle/man/man1/java.1.gz
lrwxrwxrwx 1 root root 36 ene 17 08:02 /etc/alternatives/javac -> /usr/lib/jvm/java-6-oracle/bin/javac
lrwxrwxrwx 1 root root 46 ene 17 08:02 /etc/alternatives/javac.1.gz -> /usr/lib/jvm/java-6-oracle/man/man1/javac.1.gz
lrwxrwxrwx 1 root root 38 ene 17 08:02 /etc/alternatives/javadoc -> /usr/lib/jvm/java-6-oracle/bin/javadoc
lrwxrwxrwx 1 root root 48 ene 17 08:02 /etc/alternatives/javadoc.1.gz -> /usr/lib/jvm/java-6-oracle/man/man1/javadoc.1.gz
lrwxrwxrwx 1 root root 36 ene 17 08:02 /etc/alternatives/javah -> /usr/lib/jvm/java-6-oracle/bin/javah
lrwxrwxrwx 1 root root 46 ene 17 08:02 /etc/alternatives/javah.1.gz -> /usr/lib/jvm/java-6-oracle/man/man1/javah.1.gz
lrwxrwxrwx 1 root root 36 ene 17 08:02 /etc/alternatives/javap -> /usr/lib/jvm/java-6-oracle/bin/javap
lrwxrwxrwx 1 root root 46 ene 17 08:02 /etc/alternatives/javap.1.gz -> /usr/lib/jvm/java-6-oracle/man/man1/javap.1.gz
lrwxrwxrwx 1 root root 42 ene 17 08:02 /etc/alternatives/java_vm -> /usr/lib/jvm/java-6-oracle/jre/bin/java_vm
lrwxrwxrwx 1 root root 41 ene 17 08:02 /etc/alternatives/javaws -> /usr/lib/jvm/java-6-oracle/jre/bin/javaws
lrwxrwxrwx 1 root root 47 ene 17 08:02 /etc/alternatives/javaws.1.gz -> /usr/lib/jvm/java-6-oracle/man/man1/javaws.1.gz
lrwxrwxrwx 1 root root 34 ene 17 08:02 /etc/alternatives/jar -> /usr/lib/jvm/java-6-oracle/bin/jar
E) Configure your USB:
Code:
$ gksudo gedit /etc/udev/rules.d/51-android.rules
Inside of this blank text file insert:
Code:
#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
Save the file and close it and then issue this command:
Code:
$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
2º - Create the Directories
You will need to set up some directories in your build environment.
Note: For the next steps, I modified the installation path sources, because in this way you can include other repositories (CAF, AOSP, etc ...).
To create them:
Code:
mkdir -p ~/bin
mkdir -p ~/android
mkdir -p ~/android/cyanogenmod
mkdir -p ~/android/cyanogenmod/jellybean
3º - Install the repo:
Enter the following to download make executable the "repo" binary:
Code:
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
Note: You may need to reboot for these changes to take effect.
4º - Install the CM10 Repository:
Now enter the following to initialize the CyanogenMod repository:
Code:
cd ~/android/cyanogenmod/jellybean/
repo init -u git://github.com/CyanogenMod/android.git -b jellybean
repo sync -j16
5º - Obtain the oscar device tree:
Create/Edit a file with the name roomservice.xml in the ".repo/local_manifests/" directory. To see this directory, you have to press Ctrl-H in your file manager.
Code:
mkdir -p ~/android/cyanogenmod/jellybean/.repo/local_manifests/
gedit ~/android/cyanogenmod/jellybean/.repo/local_manifests/roomservice.xml
Add these lines:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="mifl/android_device_pantech_oscar" path="device/pantech/oscar" remote="github" revision="jellybean" />
<project name="mifl/android_device_pantech_qcom-common" path="device/pantech/qcom-common" remote="github" revision="jellybean" />
<project name="mifl/android_device_pantech_msm8960-common" path="device/pantech/msm8960-common" remote="github" revision="jellybean" />
<project name="mifl/android_kernel_pantech_p8010" path="kernel/pantech/p8010" remote="github" revision="jellybean" />
</manifest>
Synchronize the repositories:
Code:
cd ~/android/cyanogenmod/jellybean/
repo sync
6º - Copy proprietary files:
Option 1:
To compile Pantech oscar, connect the device to the computer and ensure that ADB is working properly.
Code:
cd ~/android/cyanogenmod/jellybean/device/pantech/oscar
./extract-files.sh
Option 2:
You can also include the repository with the necessary files for compilation:
Code:
gedit ~/android/cyanogenmod/jellybean/.repo/local_manifests/roomservice.xml
Add this line:
Code:
<project name="mifl/android_vendor_pantech_oscar" path="vendor/pantech/oscar" remote="github" revision="jellybean" />
Synchronize the repositories:
Code:
cd ~/android/cyanogenmod/jellybean/
repo sync
7º - Download RomManager:
Note: This only needs to be done when an update to RomManager is released. If you are-up-to date, you may skip to Building CyanogenMod.
Download RomManager which is needed by the build:
Code:
cd ~/android/cyanogenmod/jellybean
./vendor/cm/get-prebuilts
8º - Building CyanogenMod:
First, check for updates in the source:
Code:
cd ~/android/cyanogenmod/jellybean/
repo sync
Now, the environment must be configured to build and the ROM compiled.
Code:
. build/envsetup.sh && brunch oscar
9º - Compiled files:
Files generated in the compilation are in the /out directory, the build file is:
~/android/cyanogenmod/jellybean/out/target/product/oscar/cm-10-XXXXX-UNOFFICIAL-oscar.zip
-------------------------------
I hope that more users try to compile the ROM, and report bugs they find. Any help is greatly appreciated.
Greetings.

**Reserved for future updates**

**Reserved for future updates**

**Reserved for future updates**

I followed your instructions to the lleter, and this is what i get.
build/core/product_config.mk:189: *** _nic.PRODUCTS.[[device/*/oscar/cm.mk]]: "device/*/oscar/cm.mk" does not exist.
Device oscar not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/Cyanogen
Repository for oscar not found in the CyanogenMod Github repository list. If this is in error, you may need to manuato your local_manifests/roomservice.xml.
build/core/product_config.mk:189: *** _nic.PRODUCTS.[[device/*/oscar/cm.mk]]: "device/*/oscar/cm.mk" does not exist.
** Don't have a product spec for: 'cm_oscar'
** Do you have the right repo manifest?

superbart007 said:
I followed your instructions to the lleter, and this is what i get.
build/core/product_config.mk:189: *** _nic.PRODUCTS.[[device/*/oscar/cm.mk]]: "device/*/oscar/cm.mk" does not exist.
Device oscar not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/Cyanogen
Repository for oscar not found in the CyanogenMod Github repository list. If this is in error, you may need to manuato your local_manifests/roomservice.xml.
build/core/product_config.mk:189: *** _nic.PRODUCTS.[[device/*/oscar/cm.mk]]: "device/*/oscar/cm.mk" does not exist.
** Don't have a product spec for: 'cm_oscar'
** Do you have the right repo manifest?
Click to expand...
Click to collapse
Sorry:
There is an error in the wording of post. The kernel repository was wrong, must be changed p9070 for P8010.
Code:
<project name="mifl/android_kernel_pantech_p8010" path="kernel/pantech/p8010" remote="github" revision="jellybean" />
The rest of the repositories are well, and have been updated today and compiled fine.
----------------------------------------------------------------------------------------------------------------
Update:
In CyanogenMod Source, ~/.repo/local_manifest.xml file has been changed to ~/.repo/local_manifests/roomservice.xml
To adapt to change into the your "~/.repo" dir, must create the dir "local_manifests", rename the file local_manifest.xml to roomservice.xml, and move it into the new dir.
----------------------------------------------------------------------------------------------------------------
Greetings.

Ok tried our again still no joy. But also your instructions never mention how the dir pantech, and oscar are made, and when i goto build it say it can't find the mk file in the /devices/pantech/oscar.
Sent from my PantechP8010 using xda app-developers app

superbart007 said:
Ok tried our again still no joy. But also your instructions never mention how the dir pantech, and oscar are made, and when i goto build it say it can't find the mk file in the /devices/pantech/oscar.
Sent from my PantechP8010 using xda app-developers app
Click to expand...
Click to collapse
Projects in the file roomservice.xml have this structure:
Code:
<project name="mifl/android_device_pantech_oscar" path="device/pantech/oscar" remote="github" revision="jellybean" />
Each of the fields is:
name: name of the repository.
path: directory where the files are placed.
remote: git server
Revision: version (branch) to synchronize.
Each time you add a line to your roomservice.xml, you must synchronize the repositories:
Code:
cd ~/android/cyanogenmod/jellybean/
repo sync
Greetings.

Ok thank you, I'm new at doing this, and I'm trying to learn.
Sent from my PantechP8010 using xda app-developers app

Berry does this compile include gapps pu or do i need to use a jb one from goo.im
Sent from my PantechP8010 using xda app-developers app

superbart007 said:
Berry does this compile include gapps pu or do i need to use a jb one from goo.im
Sent from my PantechP8010 using xda app-developers app
Click to expand...
Click to collapse
You have to download Google Apps and flash from CWM Recovery.
Greetings.

Ok cool thanks
Sent from my PantechP8010 using xda app-developers app

Refactor to use repo msm8960-common
Changes in the repositories structure:
The repositories are needed:
Code:
android_device_pantech_oscar
| - android_device_pantech_qcom-common
| - android_device_pantech_msm8960-common
| - android_kernel_pantech_p8010
| - android_vendor_pantech_oscar
To complete this refactoring, you need to add a repository to your file: ~/.repo/local_manifests/roomservice.xml:
Code:
<project name="mifl/android_device_pantech_msm8960-common" path="device/pantech/msm8960-common" remote="github" revision="jellybean" />
And synchronize:
Code:
repo sync
Greetings.

mifl said:
Changes in the repositories structure:
The repositories are needed:
Code:
android_device_pantech_oscar
| - android_device_pantech_qcom-common
| - android_device_pantech_msm8960-common
| - android_kernel_pantech_p8010
| - android_vendor_pantech_oscar
To complete this refactoring, you need to add a repository to your file: ~/.repo/local_manifest/roomservice.xml:
Code:
<project name="mifl/android_device_pantech_msm8960-common" path="device/pantech/msm8960-common" remote="github" revision="jellybean" />
And synchronize:
Code:
repo sync
Greetings.
Click to expand...
Click to collapse
im getting this error message on step 8
Device oscar not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Repository for oscar not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifests/roomservice.xml.
build/core/product_config.mk:189: *** _nic.PRODUCTS.[[device/*/oscar/cm.mk]]: "device/*/oscar/cm.mk" does not exist. Stop.
** Don't have a product spec for: 'cm_oscar'
** Do you have the right repo manifest?
No such item in brunch menu. Try 'breakfast'
Please help

atadres said:
im getting this error message on step 8
Device oscar not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Repository for oscar not found in the CyanogenMod Github repository list. If this is in error, you may need to manually add it to your local_manifests/roomservice.xml.
build/core/product_config.mk:189: *** _nic.PRODUCTS.[[device/*/oscar/cm.mk]]: "device/*/oscar/cm.mk" does not exist. Stop.
** Don't have a product spec for: 'cm_oscar'
** Do you have the right repo manifest?
No such item in brunch menu. Try 'breakfast'
Please help
Click to expand...
Click to collapse
Can you write the contents of your file: ~/.repo/local_manifest/roomservice.xml
Greetings.

mifl said:
Can you write the contents of your file: ~/.repo/local_manifest/roomservice.xml
Greetings.
Click to expand...
Click to collapse
sure heres what it says
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="mifl/android_device_pantech_oscar" path="device/pantech/oscar" remote="github" revision="jellybean" />
<project name="mifl/android_device_pantech_msm8960-common" path="device/pantech/msm8960-common" remote="github" revision="jellybean" />
<project name="mifl/android_device_pantech_qcom-common" path="device/pantech/qcom-common" remote="github" revision="jellybean" />
<project name="mifl/android_kernel_pantech_p8010" path="kernel/pantech/p8010" remote="github" revision="jellybean" />
</manifest>

atadres said:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="mifl/android_device_pantech_oscar" path="device/pantech/oscar" remote="github" revision="jellybean" />
<project name="mifl/android_device_pantech_msm8960-common" path="device/pantech/msm8960-common" remote="github" revision="jellybean" />
<project name="mifl/android_device_pantech_qcom-common" path="device/pantech/qcom-common" remote="github" revision="jellybean" />
<project name="mifl/android_kernel_pantech_p8010" path="kernel/pantech/p8010" remote="github" revision="jellybean" />
</manifest>
Click to expand...
Click to collapse
The file seems fine.
To ensure:
Code:
cp ~/android/cyanogenmod/jellybean/.repo/local_manifests/roomservice.xml ~/android/cyanogenmod/jellybean/.repo/local_manifest.xml
Synchronize the repository:
Code:
repo sync
If synchronizing the repository, you get an error, saying it has duplicate projects, you should delete the file: local_manifest.xml.
Greetings.

Ok got it build with no errors, but it just boot loops at the 1st showing of pantech. It could be that you are using cm10.1(jelly bean), and that there is only ics available for this phone. Could you post the changes to build cm9 and then I could give that a try.

superbart007 said:
Ok got it build with no errors, but it just boot loops at the 1st showing of pantech. It could be that you are using cm10.1(jelly bean), and that there is only ics available for this phone. Could you post the changes to build cm9 and then I could give that a try.
Click to expand...
Click to collapse
Before installing the rom, have you applied?
Wipe data/factory reset;
Wipe cache partition;
Advanced -> Wipe dalvik cache;
Greetings.

Yes wiped every thing.
Sent from my PantechP8010 using xda app-developers app