Related
Hello, i've no right to post in Development sub forum, so i put it here.
I have LG Optimus 3D MAX P720H and followed this thread
http://forum.xda-developers.com/showthread.php?t=1642590
and got error 'Fail to find file'. After checking the problem i found that the update files for P720H have different name from original thread ('LGP720h_AP[0*].bin' instead of 'LGP720_AP[0*].bin') and file 'hdcp.sh' which MaxRoot.exe looking for is in LGP720h_AP[06].bin
So, for anybody that has P720H and has the same problem. pls. download this file
LGP720h_AP[06].rar (http://www.mediafire.com/?78s4bacbund8tb1)
and extract it. after LGMobile Supporting Tool update until you see file 'LGP720h_AP[06].bin' (should be waiting until 'LGP720h_AP[07].bin' appear) just replace it with the file extracted from LGP720h_AP[06].rar
I'm not sure if the file i posted against any rules. If it is and removed, you guys just copy file LGP720h_AP[06].bin during update, rename it to LGP720_AP[02].bin, run MaxRoot.exe, rename it back to LGP720h_AP[06].bin
Thanks 985hPaKicK for this wonderful tool
ClockWorkMod possible for max?
Just asking...
Having p920...
Not Working for me
hellvy said:
Hello, i've no right to post in Development sub forum, so i put it here.
I have LG Optimus 3D MAX P720H and followed this thread
http://forum.xda-developers.com/showthread.php?t=1642590
and got error 'Fail to find file'. After checking the problem i found that the update files for P720H have different name from original thread ('LGP720h_AP[0*].bin' instead of 'LGP720_AP[0*].bin') and file 'hdcp.sh' which MaxRoot.exe looking for is in LGP720h_AP[06].bin
So, for anybody that has P720H and has the same problem. pls. download this file
LGP720h_AP[06].rar (http://www.mediafire.com/?78s4bacbund8tb1)
and extract it. after LGMobile Supporting Tool update until you see file 'LGP720h_AP[06].bin' (should be waiting until 'LGP720h_AP[07].bin' appear) just replace it with the file extracted from LGP720h_AP[06].rar
I'm not sure if the file i posted against any rules. If it is and removed, you guys just copy file LGP720h_AP[06].bin during update, rename it to LGP720_AP[02].bin, run MaxRoot.exe, rename it back to LGP720h_AP[06].bin
Thanks 985hPaKicK for this wonderful tool
Click to expand...
Click to collapse
:crying::crying::crying::crying::crying:
Is not working for me, I am doing exactly with your instructions and is still telling me Fail to find file, please retry... Why can I do????
Thanks
This tool works also on europeen P720! (without "h")!
By the way, where is the difference between this devices?
cheers,
---------- Post added at 04:05 PM ---------- Previous post was at 04:00 PM ----------
Samizzu321 said:
Just asking...
Having p920...
Click to expand...
Click to collapse
I´m working on this since nearly 2 weeks.
Now I found a german dev, wich probably can help me.
I also made a thread, for more information - search my thread!
cheers,
jee92 said:
...
Is not working for me, I am doing exactly with your instructions and is still telling me Fail to find file, please retry... Why can I do????
Thanks
Click to expand...
Click to collapse
ok, here's some short instruction (mostly copied from original post anyway )
1. Connect USB to Max.
2. Check USB debugging.
3. Execute Rooting.bat
4. After put some files, Max will reboot. then press and hold volume up button to go to S/W Upgrade mode.
If you fail, try manually. turn off your max. and while hold volume up button, connect usb to Max.
5. *** You can close command prompt which running Rooting.bat now.
6. Execute LGMobile Support Tool. and after check the connection with Max, Customer Support - Recovery phone. Reocovery phone function doesn't affect your data. If LGMobile Support Tool isn't installed, Execute B2CAppSetup for install support tool.
7. After LGMobile Supporting Tool update until you see file 'LGP720h_AP[06].bin' (should be waiting until 'LGP720h_AP[07].bin' appear) just replace it with the file extracted from LGP720h_AP[06].rar
8. Let updating process finish.
If you follow instruction on original thread, you should normally see that error. But if you replace the file correctly, you should get root even though you get that error
keanu1991 said:
This tool works also on europeen P720! (without "h")!
By the way, where is the difference between this devices?
cheers,
Click to expand...
Click to collapse
If you have p720, you can use instruction on original thread too
for model differentiation, i think it's about 3G freq.
Wondering if there is anyone here willing to help me with this issue. I tried flashing the phone with the LG Tool and the .cab firmware file but it keeps giving me a fatal error. I also could not use the tool for converting it to .kdz. Please can someone give me instructions for unbricking this phone and or point me to a firmware that I can try flashing with Odin or a .kdz package? Can it be done from the memory card? I had CWM recovery installed but all I can get it to do his hang on the LG logo or go into emergency mode. Any help appreciated. Thanks.
Use this to download your original kdz.
post-mortem said:
Use this to download your original kdz.
Click to expand...
Click to collapse
Only downloads a 7.88MB file when the firmware is 95.6MB.
After following these instructions:
Step 1: Get drivers here and install them
LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3. 7.2.exe
Step 2: Reboot
Step 3: Make sure phone has at least 50% battery
Step 4: Get firmware here
Firmware LGL45CT2_01
Step 5: Download this and extract
KDZ_FW_UPD_EN.zip
Step 6: Put phone in emergency mode
To put the LGL45C into download/emergency mode:
1. With the phone powered off you hold Volume Down and Back at the same time.
2. While holding the keys insert a USB cable plugged into a PC or charger, in a couple of seconds the the screen should say emergency mode at the bottom.
Step 7: Follow these steps in order (This is from the extracted "KDZ_FW_UPD_EN.zip" ZIP)
Install msxml.msi
Disable antivirus software
Open UpTestEX_mod2_marwin.exe
Wait for the program to open
Look for "Encrypt cab file to kdz file"
Click the folder icon
Choose the location of the cab you downloaded for L45C firmware
Encrypt cab -> kdz Program will freeze up. DO NOT EXIT until program says Done!!! Otherwise it won't finish converting.
Close program
Open KDZ_FW_UPD.exe
"Type" choose CDMA
Choose in "Phonemode": Emergency
Click the folder icon and choose the kdz file that UpTestEX_mod2_marwin.exe just made.
Click Launch software update and enjoy!
I get:
"
[R&D Test Tools Log File]
13:06:25 : Launching SW update
13:06:25 : Unpacking KDZ
13:06:28 : KDZ file extraced
13:06:35 : Files were extracted.
13:06:35 : LGMobileDL Load.
13:06:35 : Port = -1
13:06:35 : Connecting to phone
13:06:44 : Check Phone mode = 2
13:06:51 : Phone type check.......
13:06:51 : LGMobileDL.DLL Loading....
13:06:51 : _SetAuthMark Ok : wAuthMark(13164)
13:06:51 : LoadLibrary Error(126)
13:06:53 : ===FINISHED===
"
I believe the KDZ flasher will work with the phone in emergency mode. It's a bit more dangerous than LGMDP, because you can brick the phone if you pull the battery, or if your computer happens to freeze during the flash.
post-mortem said:
I believe the KDZ flasher will work with the phone in emergency mode. It's a bit more dangerous than LGMDP, because you can brick the phone if you pull the battery, or if your computer happens to freeze during the flash.
Click to expand...
Click to collapse
Yes, but I can't seem to find a solution to the error.
13:06:51 : LGMobileDL.DLL Loading....
13:06:51 : _SetAuthMark Ok : wAuthMark(13164)
13:06:51 : LoadLibrary Error(126)
Click to expand...
Click to collapse
It's unable to load the .dll file. If that file is included in the files you downloaded, try downloading it again. If it's downloaded on the fly by the program you were running, try running it again, to force it to redownload the dll. Also, make sure there isn't another version re: 32 vs. 64 bit. Lastly, try doing the update on another computer.
post-mortem said:
It's unable to load the .dll file. If that file is included in the files you downloaded, try downloading it again. If it's downloaded on the fly by the program you were running, try running it again, to force it to redownload the dll. Also, make sure there isn't another version re: 32 vs. 64 bit. Lastly, try doing the update on another computer.
Click to expand...
Click to collapse
Still getting the same story on another PC.
Try this. Before you do the flash (the step which throws the error), look for LGMobileDL.dll on your computer, and replace it with this one or this one (they're different).
I'm sorry for bumping a nearly-year-old thread but I'm currently experiencing the same problems.
I successfully rooted my L45C but idiotically didn't do a backup and ran into some problems while playing around with it down the line. I am now stuck in a bootloop with CWM recovery.
I've tried the method that callihn tried (which I found on androidforums) and got the same results. I tried to force a system update with the LG Mobile Support Tool both to no avail. Replacing the LGMobileDL.dll (as suggested above) didn't help (the first link was dead for me as well).
I would love if it someone could help give me some insight on how to fix my problem.
DUDE, STOP!!
daihatsuboy said:
I'm sorry for bumping a nearly-year-old thread but I'm currently experiencing the same problems.
I successfully rooted my L45C but idiotically didn't do a backup and ran into some problems while playing around with it down the line. I am now stuck in a bootloop with CWM recovery.
I've tried the method that callihn tried (which I found on androidforums) and got the same results. I tried to force a system update with the LG Mobile Support Tool both to no avail. Replacing the LGMobileDL.dll (as suggested above) didn't help (the first link was dead for me as well).
I would love if it someone could help give me some insight on how to fix my problem.
Click to expand...
Click to collapse
K. Listen up. YOU ARE NOT BRICKED. DO NOT flash any of these solutions. If you can get into CWM recovery, you are GOLDEN. I wish
I could, as I am truly bricked. To truly brick it, just go to System>privacy>factory reset and then you can be where we are. What you want
is a copy of an LGl45c NANDROID backup. That's it, that's all. I have copies on my Linux partition (I'm in Windows now). You can email
me.
Do not lose ability to get to CWM. If you do, and all you can get to is the EMERGENCY download mode, you will find that the l45c is not
nearly as supported as you thought (just look at how many custom ROMs you could find). Flashing these firmware downloads may very well
brick your phone for real, especially since we are having difficulty finding the correct files that are not corrupt or really for a 'phone that may or
not be close....'.
I'd give you my phone number, but.... oh yeah, I'm bricked!!! lol!!! :cyclops:
Edit: Google for 'stock l45c images' (.img) files. They are hard to find. In fact, I did the same as you and couldn't find an original. I used
an older one. Know the definition of the word 'flash', and what you are flashing. You want to flash an .img, not a firmware update. (Firmware is the lowest. Think programming: machine>assembly>language). You are 'in assembly'. Yay!! Stay away from 'machine' !!)
Nandroid
COULD YOU PLEASE SEND ME THE BACKUPS!? Or any files you have for this phone!? Please and thank you!
what os did you use to flash the firmware my phone is bricked as well and none of these methods work, i always get load library error 126.
post-mortem said:
Try this. Before you do the flash (the step which throws the error), look for LGMobileDL.dll on your computer, and replace it with this one or this one (they're different).
Click to expand...
Click to collapse
Some of these links don't work any more. I've attached a ZIP archive of various versions of the LGMobileDL.dll file. I downloaded these versions from zhaodll.co (very skeptically at first), but ran them through my virus checked, then stripped the junk and identifier files that site added to the package.
Unfortunately, I haven't had success at using any of these modules with the KDZ program. I still either hit the LoadLibrary error ("LoadLibrary Error(126)"), or the KDZ program hangs.
post-mortem said:
It's unable to load the .dll file. If that file is included in the files you downloaded, try downloading it again. If it's downloaded on the fly by the program you were running, try running it again, to force it to redownload the dll. Also, make sure there isn't another version re: 32 vs. 64 bit. Lastly, try doing the update on another computer.
Click to expand...
Click to collapse
We are discussing a few different DLL files. I discovered that LGMobileDL.dll does not cause the problem. The absence of a different DLL file causes the problem (and the LGMobileDL reports the error).
Unfortunately, the download for this specific device (the CAB file) does not contain a DLL which the flasher application expects to use. LG's own "Mobile Support Tool" downloads a file from LG's servers and expects the package to contain this DLL file to process the flashing, but for the LGL45C, the package does not contain this DLL (again, from LG's own servers!).
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search that how to go back to my stock 4.4 and now I want to share this method with you people, it may help some those who are really stuck in there. It's my own effort so if you find it helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
amir. said:
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search how to go back to my stock and now want to share with you people. It my own effort so if you find out helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
Click to expand...
Click to collapse
Can this method be used for my phone which is now on Future ROM, but originally is D838 32GB?
I just need to get the tot file?
There is easy way to go back on stock for d838 model.. Use kdz method..
Secondly i didn't check on d838 model but u can check by using tot file n tot flash method.. Just search for F350L tot file.. I guess its available online.. Then u can try if it works may b it work but i m not sure..
Thirdly its my guess.but u can check if d838 firm can be edited then.edit that file and change it to f350L then use it through kdz method..
But u have to check it at ur own risks..
Sent from my LG-F350K using XDA Free mobile app
amir. said:
There is easy way to go back on stock for d838 model.. Use kdz method..
Secondly i didn't check on d838 model but u can check by using tot file n tot flash method.. Just search for F350L tot file.. I guess its available online.. Then u can try if it works may b it work but i m not sure..
Thirdly its my guess.but u can check if d838 firm can be edited then.edit that file and change it to f350L then use it through kdz method..
But u have to check it at ur own risks..
Sent from my LG-F350K using XDA Free mobile app
Click to expand...
Click to collapse
From what @orsonwang posted, his phone goes to bootloop when flash using kdz.
Your guide, I can get F350 tot file and change the hex to D838? I have found a working F350S v10e tot file and DLL. Can I use these file?
xb360 said:
Can this method be used for my phone which is now on Future ROM, but originally is D838 32GB?
I just need to get the tot file?
Click to expand...
Click to collapse
Here is link of tot file for F350L:
https://www.fshare.vn/file/TVR9DPAC7T
for dll file you can use any variant dll file because it is common for all K/L/S..
xb360 said:
From what @orsonwang posted, his phone goes to bootloop when flash using kdz.
Your guide, I can get F350 tot file and change the hex to D838? I have found a working F350S v10e tot file and DLL. Can I use these file?
Click to expand...
Click to collapse
yes orsonwang eventually did the same tot method to get his phone back that give more confidence in this method. you can check this as this modification works for all tot files.. if it works i hope it will go beyond 80% and then its ok even at the end it gives error on flash tool because in my experience it didn't able to make to 100% not even a single time but it worked for me.. you can check if didn't start flashing then you have you current at least and if it started then hopefully it will go beyond 80% and i hope it will work but not confirmed you have to make your own mind to take risk as i have no such experience i am just guessing it might work..
Best of Luck..
amir. said:
yes orsonwang eventually did the same tot method to get his phone back that give more confidence in this method. you can check this as this modification works for all tot files.. if it works i hope it will go beyond 80% and then its ok even at the end it gives error on flash tool because in my experience it didn't able to make to 100% not even a single time but it worked for me.. you can check if didn't start flashing then you have you current at least and if it started then hopefully it will go beyond 80% and i hope it will work but not confirmed you have to make your own mind to take risk as i have no such experience i am just guessing it might work..
Best of Luck..
Click to expand...
Click to collapse
It only goes till 80%, but the phone still able to boot up?
xb360 said:
It only goes till 80%, but the phone still able to boot up?
Click to expand...
Click to collapse
no it went beyond 80 but didn't complete 100.. it normally went to 92 to 93.. but once phone rebooted by itself then it should be ok..
Back to Stock
amir. said:
no it went beyond 80 but didn't complete 100.. it normally went to 92 to 93.. but once phone rebooted by itself then it should be ok..
Click to expand...
Click to collapse
Hy !
Please help me. My device is D838. I installed the "Future_V3.1_Lollipop".
How can'i revert back to STOCK D838 ?
I have D838.tot but when I try to flash it back, there is a many error messages.
I edited the build.prop to correct anything in it.
KDZ not work, only hope is the TOT method.
Please help me !
THX !!
LorinczG77 said:
Hy !
Please help me. My device is D838. I installed the "Future_V3.1_Lollipop".
How can'i revert back to STOCK D838 ?
I have D838.tot but when I try to flash it back, there is a many error messages.
I edited the build.prop to correct anything in it.
KDZ not work, only hope is the TOT method.
Please help me !
THX !!
Click to expand...
Click to collapse
Are you using the correct DLL file?
Try this DLL file: http://forum.xda-developers.com/showpost.php?p=58628114&postcount=32
This is for 32GB phone.
Your tot file is original D838 or modified from F350?
Maybe you want to try this to file, it's from TW 10D 32GB
http://forum.xda-developers.com/showpost.php?p=58628087&postcount=31
Then just follow the steps from the guide on 1st post
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
I did mine with both these files and that guide, flashed without problem.
amir. said:
Here is some guide as i faced problem to go back once from future 3.0 and the other time i installed drake v1 and it changed to d838 so when i tried to install tot it gave me error like crossDL so i figured it out after alot of search how to go back to my stock and now want to share with you people. It my own effort so if you find out helpful then plz appreciate.. thanks.
Steps to follow:
1. Download Winhex software: https://mega.co.nz/#!IUFnRRBb!JlQpWk_PiQ5NIpE2Pc7y7ovRuv3Fx-slT0A3W7ARpMc
2. Extract it and open it and there will be folder inside winhex. its pre-installed app so you don't need to install it just open folder and run the application and it give some message that you can not save larger file with evaluation version.. just open and click on help and then register option then a dialogue box will be opened and past the key you will find in the main folder text file named with "key". it will be registered version now you can open your tot file and edit it.
3. Open your tot file and click on edit and then on find then search for word "F350" and you will be there. Just change the last word with "L". if you have F350K than K with L and if you have F350S then S with L. if you want to go back from future 3.0 rom and change whole letter with "D838" and remove last digit by putting 00 on left column. you can see the pics for guide.
4. Now save the file and with this file flash your lg g pro 2 and for that i m sure you guys already have guide to flash tot file otherwise you can search for it..
Guide for flashing through tot and dll file:
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Note: I am not responsible for any damage do it at your own risk..
Click to expand...
Click to collapse
I was on Drake v1 and i flashed 4.4 rom after that phone is giving security error at boot. I downloaded tot and dll for my ph (F350s) and following your above mentioned post i edited F350s to D838 but still i am getting cross dl error. Any help pl?
Ahmed Xperia p said:
I was on Drake v1 and i flashed 4.4 rom after that phone is giving security error at boot. I downloaded tot and dll for my ph (F350s) and following your above mentioned post i edited F350s to D838 but still i am getting cross dl error. Any help pl?
Click to expand...
Click to collapse
Did u delete "S" from F350S??
amir. said:
Did u delete "S" from F350S??
Click to expand...
Click to collapse
yes id deleted S by putting 00 on left column
Should i use dll file for D838?
Ahmed Xperia p said:
yes id deleted S by putting 00 on left column
Should i use dll file for D838?
Click to expand...
Click to collapse
yes.. u should use dll for d838.. once i faced that..
amir. said:
yes.. u should use dll for d838.. once i faced that..
Click to expand...
Click to collapse
i have downloaded dll for 8d38 but not sure it's for 16 g or 32 g. Will it make any difference? If possible send me dll you flashed. Thanks
Update: Tried using D838 Dll but same error
PS: I am on windows 8.1 if this makes difference
---------- Post added at 11:27 AM ---------- Previous post was at 11:12 AM ----------
DL upgrade or Board Dl
I figured out there are these options on lg flashtool. By default upgrade dl is selected. Do i need to select board dl?
Ahmed Xperia p said:
i have downloaded dll for 8d38 but not sure it's for 16 g or 32 g. Will it make any difference? If possible send me dll you flashed. Thanks
Update: Tried using D838 Dll but same error
PS: I am on windows 8.1 if this makes difference
---------- Post added at 11:27 AM ---------- Previous post was at 11:12 AM ----------
DL upgrade or Board Dl
I figured out there are these options on lg flashtool. By default upgrade dl is selected. Do i need to select board dl?
Click to expand...
Click to collapse
bro i m using windows 7 and i m not sure if that is the case.. anyhow i am attaching dll file..
amir. said:
bro i m using windows 7 and i m not sure if that is the case.. anyhow i am attaching dll file..
Click to expand...
Click to collapse
Didint get dll file bro
Ahmed Xperia p said:
Didint get dll file bro
Click to expand...
Click to collapse
I guess this time I have attached it..
amir. said:
I guess this time I have attached it..
Click to expand...
Click to collapse
Thanks but i solved my problem my eidting and flashing kdz
Sent from my LG-D838 using XDA Free mobile app
Ahmed Xperia p said:
Thanks but i solved my problem my eidting and flashing kdz
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
Good nice to hear that..
Hi guys, last week i've got a problem with LGUP while installing a KDZ on my LG G7. The error is 0x2000 and it can't complete the flash of KDZ firmware.
After i fix the problem and i create this thread to help you.
1. Download the Official KDZ firmware of LG G7 ( it's a large file ): https://goo.gl/ESWAhb
2. Uninstall LGUP if you have an old version, restart the PC, and install this new version of LGUP: https://goo.gl/GRFHGu
3. Download this ZIP file : https://goo.gl/6idLqN
4. Open the ZIP and copy the DLL file ( named "LGUP_Common.dll" ) in this directory " C:\Program Files (x86)\LG Electronics\LGUP\model\common ". If there isn't the common folder, create it and copy the dll file inside.
5. Now the LGUP program works without any Error.
many many thank my friend works fine thanks again
gavsi said:
many many thank my friend works fine thanks again
Click to expand...
Click to collapse
No problem. You're welcome
tks
seannolo24 said:
Hi guys, last week i've got a problem with LGUP while installing a KDZ on my LG G7. The error is 0x2000 and it can't complete the flash of KDZ firmware.
After i fix the problem and i create this thread to help you.
1. Download the Official KDZ firmware of LG G7 ( it's a large file ): https://goo.gl/ESWAhb
2. Uninstall LGUP if you have an old version, restart the PC, and install this new version of LGUP: https://goo.gl/GRFHGu
3. Download this ZIP file : https://goo.gl/6idLqN
4. Open the ZIP and copy the DLL file ( named "LGUP_Common.dll" ) in this directory " C:\Program Files (x86)\LG Electronics\LGUP\model\common ". If there isn't the common folder, create it and copy the dll file inside.
5. Now the LGUP program works without any Error.
Click to expand...
Click to collapse
The DLL File saved life while rolling back to oreo from pie on lg g6. I was getting the error Use the latest dll LAF Protocol version is not match on lg up. The whole scenario in this thread https://forum.xda-developers.com/lg-g6/help/lg-g600k-pie-issues-t3953256
I am trying to upgrade my G7 through LG UP ( as the ota never arrived, and LG Bridge does not work), and although I follow the exact directions mentioned above I still get the 0x2000 error and my update aborts at 75%.
my G7 region is TIM, not sure if this is relevant.. can anyone help?
Will this LGUP for the G7 work with the G6.? I have tried to replace or make a common folder with the Common.dll file however on booting LGUP version 1.0.28.9 the file becomes replaced with the stock Common.dll file. Any help would be appreciated as I'm trying to get my phone out of a boot loop situation.
ulalume said:
I am trying to upgrade my G7 through LG UP ( as the ota never arrived, and LG Bridge does not work), and although I follow the exact directions mentioned above I still get the 0x2000 error and my update aborts at 75%.
my G7 region is TIM, not sure if this is relevant.. can anyone help?
Click to expand...
Click to collapse
Hey, how did you solve this issue? I have same problem. my phone got reset now (just restart and poweroff options)
Long story short, my phone was flashed with a neutral rom (not tim) from the store I bought it, although ot was brand new amd sealed...don't know how, probably in order for them to remove the Tim branding.
So, I reflashed it with it's original tim rom through lg up, the process went smoothly, and it immediately received the new OS update OTA.
Downside is that now I get a Tim startup screen, for which I don't care, and the Tim preinstalled apps, which can all be deactivated, so mo problem there too
So I just got the Aristo 3 and wanted to root it. after an extensive search I have come up empty. Does anyone know if there is a method available to use yet or maybe something is in the works? I've unlocked flashing but I cant seem to boot recovery. Any help would be greatly appreciated.
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Nvitethedark said:
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Click to expand...
Click to collapse
Hmm I'll give it a try. The phone is still new enough that I don't have much saved to it and if I brick it can take it back
should be able to just get the boot image may be the aristo 2 dev would pick this up since he's familiar with it I see you have a few posts in that forum maybe you can send that dev a message see if they would pick it up.
I eagerly await any progress in this run! My girlfriend cracked her screen on her Aristo 2 and decided that it was time to upgrade. I've never been disappointed in the idea of upgrading my phone...until it meant giving up my Aristoboy Mk.2(which was/is quite formidable)and rooted status along with it. If there is anything I might read about the process online, I would at very least consider the task myself. I am learning, but I have some decent skills and experience behind me. Please let me know if I can assist in any way. If not, I hope to see the first strides towards tackling this latest addition to the Aristo line!
My thanks to all my fellow devs here! You each make up a piece of the whole collection that make this, hands down the best forum/online community available the world over! Keep it up! We are making a difference in so many lives!
Your friend,
~[ProTech]~
So I've been busy as **** lately, but I found that the issue seems to be with the os more than the phone itself. I'm not that proficient with downgrading the os to a earlier version since this phone came stock with Oreo. I will try and talk to some of the devs who did the aristo 2 x210ma. Hopefully they have a solution. I've been using my 2 instead. I never realized how much you can't do with a stock phone and os.
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
LgPWN'd said:
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
Click to expand...
Click to collapse
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Reckless459 said:
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Click to expand...
Click to collapse
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...
So I have LGup, is there a difference with the dev patched one?
.
Click to expand...
Click to collapse
in answer to that YES quite a difference...
devpatched lgup gives you extra options such as Dump and Partitions-DL and Chiperase among others...
you'll NEED that dump and partitions-DL option....
LgPWN'd said:
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...ll
Click to expand...
Click to collapse
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Reckless459 said:
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Click to expand...
Click to collapse
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
LgPWN'd said:
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
Click to expand...
Click to collapse
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Reckless459 said:
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Click to expand...
Click to collapse
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
@Reckless459
is there nothing further?
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
Dude...
First off let me say MertoPCS has the biggest pile of **** customer care department. I'm still waiting on my new device to comr from the warrenty department. I did however fix the sim issue (again metro sucks leaky bowels). I will definitely post any new developments as soon as the happen.
Oh also i did a dump on another phone (aristo 2) and had no issuses. And i saw what ypu meant with the boot_COM##. Thanks for the help.
LGUP dll
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Nvitethedark said:
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Click to expand...
Click to collapse
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
LgPWN'd said:
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
Click to expand...
Click to collapse
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
DOWNGRADE Don't UPGRADE
Nvitethedark said:
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
Click to expand...
Click to collapse
If at all posible find the OLDEST firmware possible in kdz and do a full flash of that .
and try your dll mod with that by extracting the dll from said kdz and renaming to what ever the one in Common folder is and keep the UI_Config.lgl in there to keep the extra options if possible...
It's all trial and error with this stuff, so keep at it.
DO NOT flash a firmware.kdz from a different model of the device as it'll flash aboot sbl etc and you'll end with a brick that can't be fixed.
and I've always liked { in my experiments} to use the partitions DL option even when downgrading etc to be able to NOT CHOOSE the boot-stack partitions...
but give it a shot and tell us how it go's.
we may be able to split a root-bounty if we come up with something working across users
LgPWN'd said:
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
Click to expand...
Click to collapse
reinstalled a non-patched version of lgup and used your common folder and set read-only options attempted a dump got this:
https://imgur.com/FJPMUwv