Related
First, my palm 750 was having the problem that it got stuck like always, and when it finally started working, i had no signal at all, radio on, turned off and back on, hard reset, soft reset, nothing. So then I saw that there was WM6 and upgrading sounded like a good idea. Started looking for the rom and i found the voda WM6 rom, followed the instructions and when it was upgrading the battery felt cuz I didn't put back the cover (my bad). After that, I tried to turn on the fone and all I got is the Bootloader screen, have read a lot and all the answers are to format the card to fat32, or to switch computers, I've used like 3 different cards, checked on 3 pc's, used another card reader and all I got is the boot screen, if I put the card in it says loading, press the end call botton, start updating and then got stuck after splash1 and bootloader says ok. What I'm wondering is if the it is a hardware problem was before the update I had no signal, and now it got stuck on the gsm part of the update. Any Ideas?? this is a really expensive paperweight!!!!!
A couple thoughts...first, when it gets to the GSM portion of the flash it takes significantly longer than the others, so you might just need to be a bit more patient. Run it again and leave it alone for 10 minutes.
If you can get to the bootloader screen, your device is not bricked. You didn't mention what carrier your device is from..is it a Vodafone device? If so, you might be able to just connect the device to your PC while it's in bootloader mode and run the full Vodafone updater on your PC. There's a chance that this method might not work if a partial flash has left your device in a state that the PC based updater can't identify.
pirulino23 said:
First, my palm 750 was having the problem that it got stuck like always, and when it finally started working, i had no signal at all, radio on, turned off and back on, hard reset, soft reset, nothing. So then I saw that there was WM6 and upgrading sounded like a good idea. Started looking for the rom and i found the voda WM6 rom, followed the instructions and when it was upgrading the battery felt cuz I didn't put back the cover (my bad). After that, I tried to turn on the fone and all I got is the Bootloader screen, have read a lot and all the answers are to format the card to fat32, or to switch computers, I've used like 3 different cards, checked on 3 pc's, used another card reader and all I got is the boot screen, if I put the card in it says loading, press the end call botton, start updating and then got stuck after splash1 and bootloader says ok. What I'm wondering is if the it is a hardware problem was before the update I had no signal, and now it got stuck on the gsm part of the update. Any Ideas?? this is a really expensive paperweight!!!!!
Click to expand...
Click to collapse
Thanks, and well it is a Cingular Treo, and I left the updater running several times for more than 3, 4 hours until the battery run out, and well, keep being stuck at gsm part, tried the tool that is on the update but after some % it got disconnected, any ideas???
im no expert. but if your using it with cingular (att) and you used a voda rom, i dont know how it would work in the first place without some sort of cid unlock? correct me if im wrong.
anyway. I would try that leaked att rom it it were me.
kapster said:
im no expert. but if your using it with cingular (att) and you used a voda rom, i dont know how it would work in the first place without some sort of cid unlock? correct me if im wrong.
anyway. I would try that leaked att rom it it were me.
Click to expand...
Click to collapse
Well First never do a rom update off the battery second I have a att/Cingular 750 had leaked att on it ran fine then moved to the voda rom still fine
If the ATT rom doesnt work search for a WM5 Rom I think someone said it was posted in here. If that doesnt work, the first rom update I screwed up killed my device I called ATT said I tried to install the audio update and it killed my device they sent a new one and then i up'ed the ATT rom GL.
mtty perhaps?
Hi there, i been looking through the forums and i am wanting to flash the phone with a new rom.
I currently have the Orange UK Rom and after installing all the HTC theme, homescreen, touchflow cube i have noticed the performance of the phone dropping so i guess what i am after is a rom with all of this on a standard rom or is there a ROM that someone can recommend me to use?
Thanks in advance
No one will tell you the best rom for your phone, you need to try them to find out which works best for you.
A lot of the ROM cooks have moved here from Hermes and Wizard and produce some great roms so most will work on your phone. May of these are optimised for the US market, so I prefer Schaps (on Hermes and Kaiser) which, for me, appears to be optimised as a rom without country or carrier specific additions and I can then customise to suit.
If your phone is Orange UK then it is probably SIM and CID locked to Orange. SIM lock is easy to check by trying SIM cards from other peoples phones. If you intend to stay with Orange then you don't need to unlock the SIM to upgrade the ROM but you will probably need to unlock the CID and possibly (depending on ROM) need to upgrade the radio.
You can CID unlock by using HardSPL - and this is a MUST to prevent heartache if you are upgrading radios.
But before you go any further do a lot of reading about the relationship between Roms/radios/CID/SIM/SPL etc and also read the threads for each rom before you flash it.
And dont flash a rom that has a radio in it. It will SIM lock your Orange device. You must SIM unlock your phone (no free way to do this yet) before flashing to a different radio version.
I'm using Dutty's No.6 with CF 3.5 and it works a treat on a simlocked Orange UK handset.
thanks for your help, i will take a look at the rom that you are using!
i am getting a 260 error when trying to use Hard SPL, any idea what this is or how to solve this?
*subscription added*
interested in seeing and learning about this. Ive just recently got my Tytn II upgrade on orange and would like to unlock its full potential.
after about 5 hours of trying to search for a solution, i attempted the Hard SPL on a different pc and it worked first time, so guessing its my pc that is at fault for the error. After sorting that out, i flashed the phone with the Schaps_WM6Pro_Kaiser_4.22_WWE_Full ROM and so far so good! really happy with this ROM. Only thing i did not do was backup the orange ROM, does anyone know where i can find this in case i need to go back to the standard ROM?
Ive just flashed with the exact same ROM as you. Have you noticed, theres no voice dialing icon?
either that or ive forgotten where it was! but it used to be easily spotted. I need that function cos im a driver by trade and this phone is too complicated to use even at the wheel (which id never do! )
help me get back my voice dialing!
oh and another thing, i cant even figure out how to get my SIM contacts back onto the phone!! (ive only had it 1 day thou)
I'm not too sure what you mean? are you talking about the function that the button on the top left side of the phone?
Also for contacts, i sync my contacts on my pc with outlook before the flash and sync it again after the flash to get all the contacts back onto my phone
ive managed to figure out the contacts, it just started reading from the SIM again.......
but the voice dialing is defo missing. You can set a voice tag by holding down on a contacts name so the menu pops out, but the Add Voice tag... option isnt there no more. I believe this ROM doesnt have it, thats my only explanation. I might have to flash over it again but i dont have the original one no more.
im gonna give Kaiser AKU.0.7.0 Cooked ROM a try, it has Cyberon Voice SpeedDial=1_2_b070717_0 which is what i think i need.
Ooh, so far this looks like the thread I need to be reading.
I will have another go at doing this CID thingy with Hard SPL.
Then i'll try the same ROM as you. I don't need the voice dialling so that shouldn't be a problem.
BTW, does anyone know how much actual memory the TyTNII has? There is another thread where the guy says his ROM has 900Mb of maps on it. I didn't think there was that much storage?
Thanks for your help!
pete_vo said:
after about 5 hours of trying to search for a solution, i attempted the Hard SPL on a different pc and it worked first time, so guessing its my pc that is at fault for the error. After sorting that out, i flashed the phone with the Schaps_WM6Pro_Kaiser_4.22_WWE_Full ROM and so far so good! really happy with this ROM. Only thing i did not do was backup the orange ROM, does anyone know where i can find this in case i need to go back to the standard ROM?
Click to expand...
Click to collapse
I've created a ROM package for the Orange UK ROM which can be used to restore it to its original state, see http://forum.xda-developers.com/showpost.php?p=1709983&postcount=10
You only need to put back SPL 1.81 AFTER flashing my ROM, see http://forum.xda-developers.com/showthread.php?t=335568 for instructions on how to do that.
forza said:
I've created a ROM package for the Orange UK ROM which can be used to restore it to its original state, see http://forum.xda-developers.com/showpost.php?p=1709983&postcount=10
You only need to put back SPL 1.81 AFTER flashing my ROM, see http://forum.xda-developers.com/showthread.php?t=335568 for instructions on how to do that.
Click to expand...
Click to collapse
Thanks a lot for this!!
i dont need the voice dailing thing so not really too bothered about this, i am not sure how much memory this phone has but the rom i used was about 50mb!!
pete_vo said:
Hi there, i been looking through the forums and i am wanting to flash the phone with a new rom.
I currently have the Orange UK Rom and after installing all the HTC theme, homescreen, touchflow cube i have noticed the performance of the phone dropping so i guess what i am after is a rom with all of this on a standard rom or is there a ROM that someone can recommend me to use?
Thanks in advance
Click to expand...
Click to collapse
Orange rom is very bad. when you click on "goto" (main screen) and try to change your wallpaper by personalising, device gets stuck. i have this brand new phone and showed it to the orange store and they change my device but still the same problem.
i show them again and they want to swop it to another one again. (funny right) so remember to goto ornage "goto" menu (bottom left of the main screen) and try to change the wallpaper, when you need to cancel your contact or claim warrenty. (every ornage kaiser will get stuck 100% sure)
thanks to our graduate pof i have done the hard spl on my orange kaiser and now it is ready to flash the hybird rom. far better than orange rom.
Gah!
I really want to get home and set up my PC to get this done!
I'm using my MacBook Pro atm and I don't think you can use the TyTN II with it.
Really annoyed at Orange though for crippling my phone.
haha orange prob done the worst job on this phone compared to all the other networks
ojfoggin said:
Ooh, so far this looks like the thread I need to be reading.
I will have another go at doing this CID thingy with Hard SPL.
Then i'll try the same ROM as you. I don't need the voice dialling so that shouldn't be a problem.
BTW, does anyone know how much actual memory the TyTNII has? There is another thread where the guy says his ROM has 900Mb of maps on it. I didn't think there was that much storage?
Thanks for your help!
Click to expand...
Click to collapse
Mines been working a treat today. The voice dialing is back on the phone, it works just like it did before. The phone functions are all there (well from what i can remember after only 1 day of original use!)
All i need now is someone to be so kind as to show me where i can get a GPS software with maps for my phone gratis
Dear Folks at XDA,
I would like to ask for you help with my HTC Touch Pro 2. I recently tried to update it to the new AthineOS CHome TF3D WM6.5 Manila ROM v 1.0 and unfortunately I failed.
The problem is that my phone now freezes at the black startup screen with the Touch Pro 2 logo and the red codes at the bottom.
I've flashed the ROM several times before and never got this issue.
Due to the fact that the phone doesn't finish the boot-up and I thus I can't get ActiveSync I'm afraid I messed up my phone for ever.
Please someone tell me I got a way out of this, I'd appreciate it very much.
Greetz,
SjonSjon
umm.... I don't think you can change the firmware just yet on the CDMA version of the phone... if you used a HardSPL that's available in the Rhodium forums then you probably used a GSM specific ROM on your CDMA phone... not sure what to tell you other than making sure you read the CDMA forum before trying something so risky. Best solution, unless someone knows how fix your phone in it's current state, is to toss it under your car and run it over and try to cash in on the insurance.
Problem solved!
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
I am glad you have recovered the beautiful device; and thanks for sharing a working solution.
sjonsjon said:
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
Click to expand...
Click to collapse
Good job!
big thanks for solution.
You just saved my life!!!
Don't get our hopes up! This is the wrong forum. CDMA TP2s can't be flashed at all yet.
This was a life saver post so a quick bump for anyone that needs it.
I unlocked my CDMA phone, installed a few roms -- decided to go back to my stock rom default (which was Telus) -- reinstalled and bam -- bricked.
Well, technically it's not a brick if you can get back into the bootloader to reflash. So no worries everyone. If everyone reads instructions well enough we should hopefully see zero "real" bricks. Or at most, just enough to only build bbq pit rather than a house.
I think my phone is truly bricked
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
my cdma is rebooting endlessley i reflashed stock rom and evorything. it seriously dosnt want to work. its most sadness... i am cashing in on the insurence. but they are going to send me a refurb..
spend 600$ on a phone got inurnce i hope the used one dosnt fail me.
Esazi said:
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
Click to expand...
Click to collapse
I did the same exact thing to mt TP2. Same outcome.
We have to learn somehow....
That stinks man. If you did, then your phone is truly bricked. You are going to have to get a replacement or switch to another phone because there is nothing you can do to get it going again. I tried everything possible and eventually just ordered a replacement. I have it now and it's working beautifully, but needless to say I am a little scared away from any more unlocking or flashing for a while.
If you read carefully you dont have to be scared of flashing
I was a noob some time ago but before doing anything I took care of reading and understanding before doing nothing.
lesson learned
By now I have flashed more than 60 times on 3 diferent HTC devices and all were a succes
Hope you get your TP2 working again!
I hope I can get there
Someday I hope to be a flashing expert, but until then I will take it slow and read carefully. Thanks for your encouragement. When I actually get money to pay for the unlock for my TP2, I will let you know how flashing goes.
How do you keep the phone in bootloader? Mine goes right to the press volume instuction screen. Other than that I'm stuck on the black name screen,also my usb will not register in device manager. This was my first try at flashing.
gadgetgirl28 said:
You just saved my life!!!
Click to expand...
Click to collapse
Holy hell, you're not lying. Thanks for coming back to post your solution!
This post saved me at least a few hours of frustration and ever worsening decision making.
So it's totally true???
this situation hasn't solution;
I was unlocking my phone (the HTC Touch Pro 2 <SPRINT>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, AND PLEASE somebody tell me , that it can be save it
;9
please help
i have the same problem. is there a way to save my phone?
hello im quite new hear but i just have one consern at the moment that im hopeing someone will help me with i just bought a hct hd2 and put wp7 on it
curently running mango os version 7.0.7392.0
any way i just got my pre payed sim card from tmoble and everythang seams to be working fine but when i set it up i couldent do the part ware it says connection setup i got
WARNING
Thare is no SIM card or PIN code has not
been input.
Please insert SIM card or input PIN code
first to use Connection setup
so any way i skiped that and chated wit ms toget my activation code everythangs seams to work fine on my home wifi
but now i have my sim card and i just put it in AND THE PHONE STILL SAYS I DONT HAVE A SIM CARD? i havent activated it yet at tmoble because be4 i do i wana make sure my device settings are right so its suposed to get recognised as an hd7 am i right?
in my settings /about it clearly states I have name /model htc hd2
so my question is am I good or did I do something wrong IS MY REGISTRY EDITED CORECTLY TO MAKE IT HD7 OR NOT HOW CAN I TELL? AND WHAT PHONE SHOULD I SAY I HAVE WHEN I ACTIVATE IT AT TMOBLE?
You'll probably get better luck asking the HD2 forums since this is in regards to their phone.
But as for the SIM issue, if your SIM card is not activated then the phone will say that there is no SIM card in the device. It needs to be activated before the phone will recognize it as a legit SIM card.
firstly 7392 is NODO,7712,7714 & 7720 is Mango.Does the features of wp7 in your hd2 workable ?
jackrabbit72380 said:
hello im quite new hear but i just have one consern at the moment that im hopeing someone will help me with i just bought a hct hd2 and put wp7 on it
curently running mango os version 7.0.7392.0
any way i just got my pre payed sim card from tmoble and everythang seams to be working fine but when i set it up i couldent do the part ware it says connection setup i got
WARNING
Thare is no SIM card or PIN code has not
been input.
Please insert SIM card or input PIN code
first to use Connection setup
so any way i skiped that and chated wit ms toget my activation code everythangs seams to work fine on my home wifi
but now i have my sim card and i just put it in AND THE PHONE STILL SAYS I DONT HAVE A SIM CARD? i havent activated it yet at tmoble because be4 i do i wana make sure my device settings are right so its suposed to get recognised as an hd7 am i right?
in my settings /about it clearly states I have name /model htc hd2
so my question is am I good or did I do something wrong IS MY REGISTRY EDITED CORECTLY TO MAKE IT HD7 OR NOT HOW CAN I TELL? AND WHAT PHONE SHOULD I SAY I HAVE WHEN I ACTIVATE IT AT TMOBLE?
Click to expand...
Click to collapse
Good lord, man. Here's the best piece of advice you will ever receive: Put down the phone and go to school. Learn to spell and write complete sentences. That skill set will serve you much better in the long run than getting WP7 working on an HD2.
radeon_x said:
Good lord, man. Here's the best piece of advice you will ever receive: Put down the phone and go to school. Learn to spell and write complete sentences. That skill set will serve you much better in the long run than getting WP7 working on an HD2.
Click to expand...
Click to collapse
This is uncalled for. XDA is a worldwide website, maybe English isn't the OP's first language. I think OP did a pretty good job trying.
@OP: prjkthack is coorect. This should of been posted in the HD2 section as it's a non-official WP7 device & god knows what could cause such a complication. Also, as he said, it could very well be that the SIM is not Activated.
Put your question here so someone can help you: HD2 Windows Phone 7 Q&A and General
...that my time with HTC One SV is running out.
But lets start from beginning!
I'm very sad to tell you, that my device has an error. Something i can not reproduce, its happening randomly, from time to time and that makes it hard to solve.
The phone is shutting down, from one moment to the next. Without any logical reason, and without i get noticed of it. That means, until i see that my phone is off, nobody can call me. And thats the reason, why i can't longer use this phone anymore.
Missing calls or connectivity is a no go for me!
Of course i have sent in the phone for warranty/repair, but without luck. Every time i've got it back, it was ok some time, but always this error came back.
What i know is, it is related to GSM network. Its happening, when the phone is trying to connect to mobile internet. But like i said, not always, only sometimes.
Without Sim-Card, all is fine (changing Sim-Card to a new one did not solve it). While plugged in for charging, also all is fine.
This situation was also the reason, why i stopped almost all of my development activities with this device! I had to make it sure, that its not coming from buggy mods
So now i came to the point, where i had to make a decision. And the answer is: HTC One (M8) :laugh:
Yes, i've bought it. And it is great. And i love it. Yes, Kitkat and Sense 6
It feels so good to hold this alu-unibody phone (i know, its "only" a phone, but its simply fantastic). It feels like One SV was the step i needed on the way to a 5" phone.
Back to HTC One SV:
I'm not sure, maybe i'll try another time the repair service, but i always have to pay the cost of the delivery. Maybe i'll sell it as defect. Maybe i'll keep it as "Wifi-Surf-Machine", lol. Don't know yet.
But that means, my phone is back to stock, completely "Locked". No TWRP, no root, nothing.
That also means, no development or testing or anything like that from my side for this phone anymore.
Sorry, this was not planned, but the situation was not longer bearable!
Well, i will try to look into this forum here and keep my threads up to date, but i also will not promise anything (i can't look what happens in the future).
You still can contact me, if you see something in my threads that needs to be updated or if you want something added to my index thread.
All in all i think it will be a long slow goodbye! :crying:
At least, i wanna thank all people here, for the funny time i had and for the good things i've learned!
Special thanks i want to bring up to @Modding.MyMind @russellvone @xpirt @rollon76 @BrateloSlava (and all i forgot, can't mention all), who helped me to bring this device going up and growing better from day to day!
Thanks guys! :good:
Thanks a lot for your great work on this device and bringing up this forum!
Just one last question! Is your car holder compatible with the M8!?
Thank you for you help and for everything that you do for us ! Enjoy your new device I will leave the phone soon too ...
I may be joining you @old.splatterhand. Battery on my device is becoming unstable and I am not in the mood to deal with repairs. Can't afford to be without a phone for a week or so. My line of work won't allow it lol.
Sent from my C525c using Tapatalk
Very sad news. But thank you very much for your time, help and company, old.splatterhand.
I afraid that without you this thread will be dead
Code:
"I demolish my bridges behind me...then there is no choice but to move forward."
~Fridtjof Nansen
Au revoir...
HTC K2_PLC_CL
#M8
This saddens me. However the M8 is on my radar anyway. ?
Glad to had you here. You have begun this xda forum and put a lot of work. Thank you for your support here and have fun with All New One.
I got my LG G2 since few days . My friends just made me a gift for my bday . Sorry but i am leaving the phone too ...
Thanks
Thank you soooo much for responding to all our questions, Especially mine
You are another reason for me to buy a M8
Thanks so much for help, for ROMs and any other things you've done for our One SV
Regarding unstable phone... Try to clean gold connectors on battery and phone. I had similar situation. Phone 10months old just started to shut down. I press power to turn on screen and htc sign - turning phone on...it was off. Random, once-twice a day. I think also network coul be problem... So I did twrp restore and clean those connectors because i read somewhere that it can be oxidized and need to be schrached a bit. Since then phone is ok. Maybe weak signal + some apps load phone to give more energy and oxydation on conectors cause instability... I didnt do any big mods. Stock one sv lte 4.2.2 root supersu, twrp, rumrunner s off. Just deleted some bloat. In time of restarts i started using app superbeam, but restarts happened random. Also instaled call recorder, but didt use it. Thats it. I have now super beam and works ok. Didnt try call recorder again, dont need it.
mlesic said:
Regarding unstable phone... Try to clean gold connectors on battery and phone. I had similar situation. Phone 10months old just started to shut down. I press power to turn on screen and htc sign - turning phone on...it was off. Random, once-twice a day. I think also network coul be problem... So I did twrp restore and clean those connectors because i read somewhere that it can be oxidized and need to be schrached a bit. Since then phone is ok. Maybe weak signal + some apps load phone to give more energy and oxydation on conectors cause instability... I didnt do any big mods. Stock one sv lte 4.2.2 root supersu, twrp, rumrunner s off. Just deleted some bloat. In time of restarts i started using app superbeam, but restarts happened random. Also instaled call recorder, but didt use it. Thats it. I have now super beam and works ok. Didnt try call recorder again, dont need it.
Click to expand...
Click to collapse
Interesting find!
What did you use to clean? Can you make a picture of yours?
Actually my wife is using the One SV as her main phone. Without a problem!
But she has no mobile internet in her provider contract, so it is disabled all the time. And for me it crashed always when it was connecting to mobile internet.
The idea about the "higher energy load could cause instability" was also in my mind, but i had no idea how to resolve it.
I think i will take a look at this :good:
I used small knife, pocket knife..didnt press hard. I read that affects some htc phones, sensation i belive.. when it happened i was in forest, weak signal...
Report back if that helps...i dont know is that solution or twrp restore solved things...i did everything i could think off so dont know what solved problem..
I will try as soon as the problem comes again.
Right now i don't want to wake sleeping dogs...
There is nothing strange you do. Just pull battery out an clean...
Now my phone works ok 2 months without turning off.. fingers crossed..
@old.splatterhand
I'm sorry sir I've just now noticed this....The m8 is great, I bought two early this year.
The M9 (HIMA) I will buy as soon as it's released
See you around my friend
russellvone said:
@old.splatterhand
I'm sorry sir I've just now noticed this....The m8 is great, I bought two early this year.
The M9 (HIMA) I will buy as soon as it's released
See you around my friend
Click to expand...
Click to collapse
Hi Russel, nice to talk to you again
Sometimes i have seen your posts in M8 forum or in Sunshine thread, always great to see "old" folks again :highfive:
Yeah, i have the M8 since early May now and its great. Nothing to worry about, for me!
That also could be the reason, that i maybe skip the M9. My M8 is just great :good:
And honestly: i'm in hope that HTC releases a tablet with Sense, similar size like Nexus 9 and with Snapdragon CPU...
I think its amazing to see your dedication to the sv forum..
All the work, time, effort and time you have put into this..
Its simply amazing..respect!!
Did the error also contain inernet browser shutting of randomly?
I have never had any issue with my sv..
I did not do much to it, dont know much about all the how to's, why not's, but have shyed away from the stuff i thought to be too risky for me (well for my sv).
In the mean while i bought a m7 and tried a bit of the risky stuff, wich made me smile and think back to my sv..
Yesterday i did s-off my sv for the first time and wanted to remove red warning, wich, in the end resulted in my sv not booting up into rom any longer.. will look into that to solve that, but...
Before i did this, i wanted to change my boot animation, turned on 'show gif' in internet browser and immediately i experienced random shut down's of internet browser.
Maybe you forgot about the sv, maybe you still think back once in a while, maybe this info is of any use, maybe not...
Thanks