Database Info

[Kernel] FluffKernel Epic 4G version 1.0.5 Rom Manager Compatiable

Here the the first offical release of Fluff Kernel for the Epic 4G
Ok here are two new versions for you all.One is the performance kernel and the other is the battery saver.Both are using the new version of my initramfs that comes with ChainsDD's Superuser.apk and su binary.So i suggest if you have Superuser.apk installed to uninstall it before flashing either of these kernels since Superuser.apk will be installed in /system/app instead of /data/app.And now for the kernels.Both of these kernels are Rom Manager compatiable and have root in them.
This is the battery saving kernel.Changes to it are:
Both Kernels are updated to DI18 sourcecode.
CPU governor set to userspace you can use SetCPU to set the speed of the kernel if you like although SetCPU seems a bit unstable on anything other then conservative.
Default scheduler set to CFQ
http://www.sdx-downloads.com/devs/skeeterslint/FluffKernel-Epic-V1.0.5B.zip
This is the performance kernel.Changes to it are:
CPU governor set to performance your cpu will always be set to max this gives the best numbers in linpack and quadrant if numbers are you thing.
Default scheduler is set to CFQ.
http://www.sdx-downloads.com/devs/skeeterslint/FluffKernel-Epic-V1.0.5P.zip
This is another battery saver kernel for those who don't want to mess with SetCPU is uses the conservative CPU governor that the overclocked kernels use.
http://www.sdx-downloads.com/devs/skeeterslint/FluffKernel-Epic-V1.0.5C.zip
All kernels have been compiled against a toolchain that is stable on the newest OTA.And all kernels have been built with stock Samsung kernel source with no modifications to the source code all changes were to the .config file.
​
This zip can be flashed with ClockWorkMod or can be taken out of the zip and the zImage can put used as a replacement for the zImage in the one click root method although this kernel has root built into it.I recommend removing the JoeyKrim root method to not cuase and conflicts.
This kernel still has some Samsung bloat in it this will be stripped out as time goes on.I will also be trying out different combinations of CPU governors and schedulers to see which one performs the best.So please test it out and post your feedback.
Link to the stock samsung source that was used for these kernels.
http://opensource.samsung.com/ Please search for SPH-D700 DI18.

Sent from my SPH-D700 using Tapatalk

Sorry for the double post but does this kernel have overclocking??
Sent from my SPH-D700 using Tapatalk

mrkrabs said:
Sorry for the double post but does this kernel have overclocking??
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
No it doesn't.

Is this the new kernel from the ota
Sent from my SPH-D700 using Tapatalk

dondadah88 said:
Is this the new kernel from the ota
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Was just about to ask..
No overclock. Will this conflict with custom roms?

rjmjr69 said:
Was just about to ask..
No overclock. Will this conflict with custom roms?
Click to expand...
Click to collapse
This is not the kernel from the ota this is a custom compiled kernel it should run fine on any roms that are out right now.I am running it myself with no issues at all to speak of.

skeeterslint said:
This is not the kernel from the ota this is a custom compiled kernel it should run fine on any roms that are out right now.I am running it myself with no issues at all to speak of.
Click to expand...
Click to collapse
Thank you. And your right its running just fine right now. I am using it with noobnl latest rom. And I had it running fine on the BOSS rom

Hi
Does this kernel support loop-back. Im trying to install ubuntu on samsung epic.

darknoobie said:
Does this kernel support loop-back. Im trying to install ubuntu on samsung epic.
Click to expand...
Click to collapse
All the b usybox applets to setup the the loop device should be there. But I have never tried to use them I will have to check the kernel config to see if the kernel is setup for it.
Sent from my SPH-D700 using Tapatalk

Skeeter this its the best kernel I have used on my phone to date, however one thing to note is that the version of busy box used in this kernel is not compatible with ti backup so the busy box that comes with ti back up needs to be used.
Sent from my SPH-D700 using Tapatalk

mark920 said:
Skeeter this its the best kernel I have used on my phone to date, however one thing to note is that the version of busy box used in this kernel is not compatible with ti backup so the busy box that comes with ti back up needs to be used.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Really it works fine for me same version of busybox that i use in all my kernels.Try reloading Ti when its running and see what happens.

skeeterslint said:
Really it works fine for me same version of busybox that i use in all my kernels.Try reloading Ti when its running and see what happens.
Click to expand...
Click to collapse
I actually tried installing an updated version of BusyBox from the market and it finds TWO different installs??? And both are old versions lol

Updated OP.
I added a link to a fully compatiable Rom Manager kernel.Try it out its just as fast as vaersion 1.0.1-2.Enjoy everyone.And I want to thank Koush for the recovery.

skeeterslint said:
Updated OP.
I added a link to a fully compatiable Rom Manager kernel.Try it out its just as fast as vaersion 1.0.1-2.Enjoy everyone.And I want to thank Koush for the recovery.
Click to expand...
Click to collapse
I have this running and recovery works fine as well as the kernel. Rom manager is nice to have so my thanx goes to skeeter and koush. Its late so I will report any issues I have tomorrow if any arise.

OK I apologize for this but it was very early in the morning when I put this up but I fubar'd my root scripts in the RM kernel it is fixed now please redownload and apply the new zip.
Thanks

skeeterslint said:
OK I apologize for this but it was very early in the morning when I put this up but I fubar'd my root scripts in the RM kernel it is fixed now please redownload and apply the new zip.
Thanks
Click to expand...
Click to collapse
That explains a lot lol. My battery has been draining like mad all day and I noticed that JuiceDefender was having all kinds of errors. Re-downloading and applying now....

odub303 said:
That explains a lot lol. My battery has been draining like mad all day and I noticed that JuiceDefender was having all kinds of errors. Re-downloading and applying now....
Click to expand...
Click to collapse
OK it was still broken but i promise its fixed now.The battery drain probably wasn't cuased by the kernel some people have had problems with android system running away and draining battery but it has nothing to do with the kernel they have flashed back to the stock kernel and still have had issues with battery drain and android system running away on them.

skeeterslint said:
OK it was still broken but i promise its fixed now.The battery drain probably wasn't cuased by the kernel some people have had problems with android system running away and draining battery but it has nothing to do with the kernel they have flashed back to the stock kernel and still have had issues with battery drain and android system running away on them.
Click to expand...
Click to collapse
I wasn't implying that the drain was caused by the kernel, I was saying that my battery was draining because JuiceDefender wasn't able to disable the APN because my root access was broken. D/l-ing update now. Thanks again!

Can i use this kernel with noobnl's Andromeda Galaxy v1.0.3 ROM?

[KERNEL] AT&T Stock-ish 0.3 BLN/USB-OTG/NFS/FUSE/init.d/adb root/boot animation

This is a mostly stock AT&T kernel I've packaged up. Its features include the BLN patch, USB-OTG support and in-kernel NFS and FUSE modules. The ramdisk has been tweaked to support init.d scripts, adb as root and boot animations (on those ROMs that support it - such as my Alien ROM).
I've tried to keep any other changes to a minimum. There is no UV/OC patching, etc as this kernel along with Alien ROM already perform outstanding.
You can grab it here.
Version 0.2 with NLS UTF-8 support is here.
Version 0.3 based on the UCLA3 kernel is here. I recommend you use the UCLA3 modem from here.
If you want to revert to stock AT&T 2.3.6 UCKK1, you can get it here. Thanks to pookieguy for the stock files!
Source is here.

mardos said:
What about for Rogers?
Click to expand...
Click to collapse
Does this forum name start with Rogers?

ouch cold.....blooded.
will there possibly be a version for rogers devices? I know the difference between kernels is minimal. not sure if its negligible. Da G mentions it a bit in his thread.

Thank you sir. Downloading now
Sent from a Red Sonja'ed Sgh I727

romracer said:
Does this forum name start with Rogers?
Click to expand...
Click to collapse
It sure doesn't but definitely includes ROGERS ROMs so maybe the name should change smh
Sent from my SAMSUNG-SGH-I727 using XDA App

Danielk425 said:
Thank you sir. Downloading now
Sent from a Red Sonja'ed Sgh I727
Click to expand...
Click to collapse
Let me know how it works Dan, im still kernel Shy..........from the Force Close shot gun

mardos said:
your a dev and this is how you talk to people who ask simple questions?
Click to expand...
Click to collapse
no rom fo jooooo...!

the2rrell said:
Let me know how it works Dan, im still kernel Shy..........from the Force Close shot gun
Click to expand...
Click to collapse
Will do going to try it when I get home.
Sent from a Red Sonja'ed Sgh I727

Danielk425 said:
Will do going to try it when I get home.
Sent from a Red Sonja'ed Sgh I727
Click to expand...
Click to collapse
Ok so I decided not to wait and everything is silky smooth love not having to look at the stupid att splash screen. Good job romracer, thanks.
Sent from a Red Sonja'ed Sgh I727

Thanks rom racer downloading now. Usb otg is sweet

Very nice! Battery is juiced again! Thank you!
Sent from my SGH-I727 using XDA App

Oh...romracer.....what a beautiful job this is.
Even though I am accustom to zImage kernels and these are forign to me....I am no stranger to source. I have to say good job.
I am currently in the process of repacking a stock kernel, and am having a tremndous amount of trouble. I believe its my repacking scripts and methods....never the less, I am working on a rom release (without a device no less)
And with your permission I would be very pleased to include this kernel with the distrubtion.
May I?
Thanks
Sent from my SAMSUNG-SGH-I897 using Tapatalk

Johnsondr80 said:
Oh...romracer.....what a beautiful job this is.
Even though I am accustom to zImage kernels and these are forign to me....I am no stranger to source. I have to say good job.
I am currently in the process of repacking a stock kernel, and am having a tremndous amount of trouble. I believe its my repacking scripts and methods....never the less, I am working on a rom release (without a device no less)
And with your permission I would be very pleased to include this kernel with the distrubtion.
May I?
Thanks
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
You may

Flash with cwm?
Sent from my SAMSUNG-SGH-I727 using xda premium

That's how I did it and it works well
Sent from my SAMSUNG-SGH-I727 using XDA App

How its battery life...will it work on skyrocketeer?
Sent via rooted SkyRocket

Battery life is the best I've seen. I'm running this on Skyrocketeer with the conservative governor set and the screen off frequency set at 192. Unlike Da_G's higher performance kernel, this one keeps the 2nd core offline until there is a heavy load, greatly increasing my battery life. I still get a 6400 score on CF-bench, while overclocked to 1.78 on Da_G's I get around 7800.

NM i got it.
Fast...

Will the boot animation support in this kernel allow me to flash a new animation to the rooted stock 2.3.6?
Sent from my SAMSUNG-SGH-I727 using XDA App

Just put a boot animation named sanim.zip in the system/media folder and it will work with this kernel.

Tsugi Rom-Anyone have access to UV rom?

Hey guys,
Searched the original page here, couldn't find an answer. So here's my question. Now that the US govt has done it and shut down websites, I was just wondering, would anyone happen to have a copy of the Tsugi ROM that's been undervolted?
If not, could someone point me to guides on how to undervolt and maybe even the ideal settings for overclocking using setcpu?
Thanks in advance!

You can get the Tsugi UV kernel on ROM Manager.
Sent from my Phoenix Blood G2x

C0dy said:
You can get the Tsugi UV kernel on ROM Manager.
Sent from my Phoenix Blood G2x
Click to expand...
Click to collapse
Cool. I'll look into it. And what software do I use to change the undervolt settings?

zeth006 said:
Cool. I'll look into it. And what software do I use to change the undervolt settings?
Click to expand...
Click to collapse
SetCPU. It's free on this site, just have to search for it.

buru898 said:
SetCPU. It's free on this site, just have to search for it.
Click to expand...
Click to collapse
Isn't that used mostly for overclocking?

anyone have any idea why i couldnt o/c past 1GHz on RG2X MIUI with FAux123 kernel? :3

zeth006 said:
Isn't that used mostly for overclocking?
Click to expand...
Click to collapse
You can also change voltage settings with it, though.

C0dy said:
You can also change voltage settings with it, though.
Click to expand...
Click to collapse
Cool. Phone arrives today afternoon/evening/whenever the FedEx guy decides to come around, off to flash the rom and undervolt the %%%% out of it.

Cool
Sent from my LG-P999 using XDA App

i found them from here (apologies for retarded links, they are outside links, and i don't have enough posts):
rootzwiki DOT com/topic/10184-rom-tsugi-2011-12-31-the-next-g2x-stock-234-leaked-lg-firmware/
i reuploaded the kernel here, i believe its the 1.5 gHz kernel and underclocked:
2shared DOT com/file/KC25xjMv/P999-234KernelOyasumi-01-signe.html

yourwhiteshadow said:
i found them from here (apologies for retarded links, they are outside links, and i don't have enough posts):
rootzwiki DOT com/topic/10184-rom-tsugi-2011-12-31-the-next-g2x-stock-234-leaked-lg-firmware/
i reuploaded the kernel here, i believe its the 1.5 gHz kernel and underclocked:
2shared DOT com/file/KC25xjMv/P999-234KernelOyasumi-01-signe.html
Click to expand...
Click to collapse
Questions from a noob. Is this different from the undervolted file? What do I do with each file? Substitute them for the installation guide on the front page of the tsugi rom guide?

the one that i linked to on 2shared is the overclocked undervolted file. ideally you should flash the ROM first through CWM, and then the kernel through CWM. try the undervolted file, if its stable, then keep it, if its not stable, try the one that is just overclocked and not undervolted.

yourwhiteshadow said:
the one that i linked to on 2shared is the overclocked undervolted file. ideally you should flash the ROM first through CWM, and then the kernel through CWM. try the undervolted file, if its stable, then keep it, if its not stable, try the one that is just overclocked and not undervolted.
Click to expand...
Click to collapse
Kinda new to the world of flashing. How do you distinguish between the rom and the kernel?

in the development thread for the G2x, the rom threads start with [ROM], that would be the easiest way.

yourwhiteshadow said:
in the development thread for the G2x, the rom threads start with [ROM], that would be the easiest way.
Click to expand...
Click to collapse
Wait. So that file you gave me. Does it have the rom and kernel, or just one?
ETA: The link the dev provides here has a download link to a "smartinstaller." is that the ROM? And the oyasumi 0.1 UV is the kernel, right?
Gah. This is stuff is confusing but interesting to learn!

zeth006 said:
Wait. So that file you gave me. Does it have the rom and kernel, or just one?
ETA: The link the dev provides here has a download link to a "smartinstaller." is that the ROM? And the oyasumi 0.1 UV is the kernel, right?
Gah. This is stuff is confusing but interesting to learn!
Click to expand...
Click to collapse
correct, the TSUGI rom has a smart installer that does everything for you. it simply installs the ROM. afterwards, its suggested that you get the oyasumi KERNEL.
ROM is most analogous to an operating system, and kernel allows the operating system to interact with the hardware. you need to install the two separately. ROM first, and then kernel.

What is the best rom and kernal for the g2x
Sent from my LG-P999 using XDA App

timothy7732 said:
What is the best rom and kernal for the g2x
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
How about creating a separate thread for that question instead of hijacking mine? Or better yet, search around. I've chosen to use Tsugi because of its reputation for stability and battery life.

Sorry I'm new to this obviously thanks for the help
Sent from my LG-P999 using XDA App

[KERNEL] UCLF5 bootanimation-enabled

Unsecure
Bootanimation enabled
borrowed some init. and init.rc from mohan (The kernel master)
to bypass samsunani and bootanimation
and JimmyStale for uploading these
Safe on UCLE2 UCLD2 UXCLF3 UCALC4 UCLF5 based roms
UXCLF5 unsecure KERNEL
http://d-h.st/iEQ
UXCLF5 Stock KERNEL
http://d-h.st/WRy

seanzscreams said:
Unrestricted
Bootanimation enabled
borrowed some init. and init.rc from mohan (The kernel master)
to bypass samsunani and bootanimation
UXCLF5 KERNEL
Wrong boot img 2 mins
Click to expand...
Click to collapse
Thanks for all the hard work seanz! You know if this will work with your uxclf3 rom? That thread gonna be unlocked anytime?

DOOOOOOODDD you're a monster!!!

yes dont please mention the thread lock be up within the hour
sorry i named them and the font looked so small i uploaded the wrong one
and yes this will work with uxclf rom

seanzscreams said:
yes dont please mention the thread lock be up within the hour
Click to expand...
Click to collapse

If you don't mind me asking, how is it that the 'UXCLF5' Kernel works with the AT&T 'Skyrocket' variant phones? I thought the Rogers & AT&T phones were slightly different, just as the international version's hardware is different. Correct me if I'm wrong!
This is all new to me as I'm just beginning to understand what's going on here, and I'm very interested in delving into custom ROM development.

Thank you sir

seanzscreams said:
and JimmyStale for uploading these
Click to expand...
Click to collapse
You sir, are quite welcome.

seanzscreams said:
yes dont please mention the thread lock be up within the hour
Click to expand...
Click to collapse
:laugh::laugh::laugh::good::good::laugh:

What's the difference in this kernel vs the f3 kernel?

What's a unsecure kernel?
Sent from my SAMSUNG-SGH-I727 using xda premium

nest75068 said:
What's the difference in this kernel vs the f3 kernel?
Click to expand...
Click to collapse
I don't think we'll see a changelog for this. I'm flashing it and will look for diffs, e.g., whether or not touch key lights stay on - obeying the phone's always on setting. Right now, only Mohan's kernel offers a fix for this.

stoopendis said:
What's a unsecure kernel?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
In noob terms, It's a kernel that's insecure
Thank you for the kernel, sean, Nice work!

Jack45 said:
I don't think we'll see a changelog for this. I'm flashing it and will look for diffs, e.g., whether or not touch key lights stay on - obeying the phone's always on setting. Right now, only Mohan's kernel offers a fix for this.
Click to expand...
Click to collapse
Please post the results of your findings. It will be interesting to see if the issues you mentioned were fixed.

M0D1441 said:
In noob terms, It's a kernel that's insecure
Thank you for the kernel, sean, Nice work!
Click to expand...
Click to collapse
Thanks.. You don't know either eh?
Sent from my SAMSUNG-SGH-I727 using xda premium

stoopendis said:
What's a unsecure kernel?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Just means you're able to run commands on it (adb/root).

scott14719 said:
Please post the results of your findings. It will be interesting to see if the issues you mentioned were fixed.
Click to expand...
Click to collapse
The I727UCLF5 kernels (both flavors) do not fix the touch keys always on issue.
Back to Mohan's Cymbaline 1.3.

Can someone conform that bootanimation are working. I can't make them work. I make ton of them and have knowlage how to but on unsecure or stock no go on bootanimation.

Sean, how difficult would it be to put certain working files from Kernels like CymBaline (or the source it was built from) and inject them into a kernel like the one in this thread? Basically fixing the issues that still exist in the skyrocket kernels. Would having the source code from the Cymbaline build, but not from the syrocket build be an opstical? I am just wondering if it could be done. TIA.

Yes and no. But It wouldnt be from ice source. Ics nor ics source Has been released,yet. Or well ..its complicated..
But soon ican assure you
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

[Kernel]ICS/CM9 LZ Kernel from Team Fah-Q (Updated 20OCT12)

Many of you have asked for the GummyMutt kernel.
Here is it.
Read the FULL OP
I nor Team Fah-Q is responsible for anything you do that leaves your phone in a bricked or broken state.
This is for ICS and CM9 ROMs ONLY!!!!!!!!!!!
This is NOW a cwm flashable zip. Follow the instructions to a TEE or things won't work and you may damage your device
Make a nandroid and Titanium backup!
Install Instructions
1 Download zip and copy to your phone's SDcard
2 Reboot to recovery
3 Flash
4 Reboot
5 Wait ten minutes
6 Enjoy!
Want to build your own Lightning Zap! kernel?
Here's the source:
Lightning Zap! kernel
Thanks to
jeffsfs for Hefe kernel source
All the great Devs at Team Acid
Team Fah-q
You guys for your support!

Change log and bug tracker
Release 2:
Included parts from jeffsf's hefe kernel
Now has OC/UV option (Works great with setcpu in Gummy)
New bootsplash
Fully integrated Lightning Zap tweaks
Only ROM based init.d tweaks needed. (Might want to remove any kernel based scripts from init.d, i.e. 04sys in Gummy)
Release 1:
Kernel is injected with Lightning Zap (Yep, it's built right into it)
Includeds necessary modules, binaries, libs
Includeds necessary init.d scripts to get the FULL Lightning Zap benefits

Download Links:
SGS4G_LZ_Kernal_r2.zip
Just download the zip, extract it, open /TeamFahQ-sgs4g_lz_kernel-ac3ecd1 and copy/cut all files and folders found inside
Then, in your build directory, navigate to /kernel/samsung/galaxys4gmtd, remove all files and folders in that directory and paste the ones you just copied.
If you just want to build the kernel and you are using the build directory from Team Acid or GummyMutt (source will be completed soon):
In terminal, navigate to your working directory
Type**:
Code:
source build/envsetup.sh
lunch
make bootimage
Then download the Lightning Zap! Tools to create a flashable cwm package
Just copy/paste boot.img and /system/modules/* into the /system folder, compress with 7z, place on sdcard, reboot to recovery, flash and enjoy.
**NOTE I use my GummyMutt directory to build so this may or may not work for you.

Lol...me first...let me guess...is this ur LZ kernel? hehe...great job Thomas
P/s: I am testing it as well and the build.prop is ok (no duplicate scripts ^^) as I added it in by default ...anw, I am forcing the battery to be drained and seems like it drains not so fast but not slow, too lol...just for the next full recharge to take a look on battery drainage of this
Sent from my SGH-T959V using xda premium

daothanhduy1996 said:
Lol...me first...let me guess...is this ur LZ kernel? hehe...great job Thomas
P/s: I am testing it as well and the build.prop is ok (no duplicate scripts ^^) as I added it in by default ...anw, I am forcing the battery to be drained and seems like it drains not so fast but not slow, too lol...just for the next full recharge to take a look on battery drainage of this
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
It sure is. Thanks for testing man! I made the .zip that I sent you wrong. I had the init.d scripts in the wrong place... and I forgot the sysctl.conf

Minor note...
In the tweak script init.d/04sys
on line 11
Code:
echo ${READ_AHEAD_KB} > /sys/block/mmcblk0/queue/read_ahead_kb
is executed, but the READ_AHEAD_KB value isn't set until line 26
Code:
READ_AHEAD_KB="4096"

IDisposable said:
In the tweak script init.d/04sys
on line 11
Code:
echo ${READ_AHEAD_KB} > /sys/block/mmcblk0/queue/read_ahead_kb
is executed, but the READ_AHEAD_KB value isn't set until line 26
Code:
READ_AHEAD_KB="4096"
Click to expand...
Click to collapse
Good call... thanks
But it doesn't matter cause later down the script, it sets it anyways... so it is doing the same thing, but I will fix it on the next update

Anybody tried this on miui?
Sent from my SGH-T959V using xda app-developers app

pisherthefisher said:
Anybody tried this on miui?
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
nope... why don't you make anandroid backup and try, then let us know what you think...
Sent from my SGH-I727 using xda app-developers app

pisherthefisher said:
Anybody tried this on miui?
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
I believe that this is the kernel already included with erikmm's latest build.
Edit: I stand corrected, refer to Thomas.Raines post above
Sent from my SGH-T959V using xda premium

gregcapps said:
I believe that this is the kernel already included with erikmm's latest build.
Edit: I stand corrected, refer to Thomas.Raines post above
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
It's not it's my own kernel and different than thomas one
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol

Eollie brought to my attention that this kernel may not function well with slimics... slim is very picking Rom to say the least so if you are on that Rom, i would suggest not using the files lib and bin folder included in this package and see how it works... but it still should be ok to use the init.d scripts, sysctl.conf and boot.img
Sent from my SGH-I727 using xda app-developers app

Fah-Q to !!!
Sent from my SGH-T959V using xda premium

ericmpanda said:
Fah-Q to !!!
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Lmfao!!!
Sent from my SGH-I727 using xda app-developers app

thomas your kernel works perfectly in nexus beam codename and remics great job and btw im go try to see if i can make this kernel able to flash in cwm and twrp to help you

Can confirm kernel works on cm9 r6 and gummy. Love gummy! Although rom doesnt go down to 100mhz, or not saying it is
Sent from my SGH-T959V using XDA Premium HD app

turtlepa said:
Can confirm kernel works on cm9 r6 and gummy. Love gummy! Although rom doesnt go down to 100mhz, or not saying it is
Sent from my SGH-T959V using XDA Premium HD app
Click to expand...
Click to collapse
First off, this kernel and tweaks is already in gummymutt...lol
Second off, where does it not say it's going to 100mhz?

I think the not going to 100mhz is a known cm9 thing. I remember seeing ti talked about at some point.

eollie said:
I think the not going to 100mhz is a known cm9 thing. I remember seeing ti talked about at some point.
Click to expand...
Click to collapse
I thought so too...
Sent from my SGH-I727 using xda app-developers app

CPUSpy is reporting some 100mhz activity on my set-up (SlimROM with LZ kernel modified as per Thomas's directions - i.e., using only boot.img, bcm4329.ko, and init.d scripts).