Hi, all
I try compile cm7 from source code for my device huawei vision u8850
and i have same error
Code:
prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/ld: out/target/product/u8850/obj/SHARED_LIBRARIES/libandroid_runtime_intermediates/android_hardware_Camera.o: in function android_hardware_Camera_native_setup(_JNIEnv*, _jobject*, _jobject*, int):frameworks/base/core/jni/android_hardware_Camera.cpp:324: error: undefined reference to 'android::Camera::connect(int)'
collect2: ld returned 1 exit status
make: *** [out/target/product/u8850/obj/SHARED_LIBRARIES/libandroid_runtime_intermediates/LINKED/libandroid_runtime.so] Ошибка 1
make: *** Ожидание завершения заданий...
please help with this error/
Up!!!
I think in this error guilty linker, but i can't solve this problem
Related
Hi all,
I'm trying to build the tiwlan_drv kernel module for my Droid1. I built the kernel, and now I am trying to build this module. However, I get several warnings and errors:
Code:
LD [M] /home/gnychis/Documents/android/ti/wilink_6_1/stad/build/linux/tiwlan_drv.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: "hPlatform_DevicePowerOn" [/home/gnychis/Documents/android/ti/wilink_6_1/stad/build/linux/tiwlan_drv.ko] undefined!
I'm not sure why I get that undefined error when I just built the core of the module.
Code:
make[2]: Entering directory `/home/gnychis/Documents/android/omap'
CC [M] /home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build/../../../../platforms/os/linux/src/WlanDrvIf.o
/home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build/../../../../platforms/os/linux/src/WlanDrvIf.c: In function 'wlanDrvIf_Create':
/home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build/../../../../platforms/os/linux/src/WlanDrvIf.c:855: error: implicit declaration of function 'create_freezeable_workqueue'
/home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build/../../../../platforms/os/linux/src/WlanDrvIf.c:855: warning: assignment makes pointer from integer without a cast
make[3]: *** [/home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build/../../../../platforms/os/linux/src/WlanDrvIf.o] Error 1
make[2]: *** [_module_/home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build] Error 2
make[2]: Leaving directory `/home/gnychis/Documents/android/omap'
make[1]: *** [../../../../platforms/os/linux/build/tiwlan_drv_stub.o] Error 2
make[1]: Leaving directory `/home/gnychis/Documents/android/ti/wilink_6_1/platforms/os/linux/build'
make: *** [../../../platforms/os/linux/build/tiwlan_drv_stub.o] Error 2
Here is the full output:
http://pastebin.com/6T0UcWgw
solved, this function name (where i get the error), was renamed in the kernel version i'm using... discrepancies between english
freezable and freezeable
Try to patch network toplogy from sakindia github.
but got the following error.
In file included from include/linux/topology.h:35:0,
from include/linux/gfp.h:7,
from include/linux/kmod.h:22,
from include/linux/module.h:13,
from drivers/net/wireless/bcmdhd/include/linuxver.h:42,
from drivers/net/wireless/bcmdhd/dhd_linux.c:29:
/home/dhruvin/Kernel/3/arch/arm/include/asm/topology.h: In function 'topology_register_notifier':
/home/dhruvin/Kernel/3/arch/arm/include/asm/topology.h:41:53: error: no return statement in function returning non-void [-Werror=return-type]
/home/dhruvin/Kernel/3/arch/arm/include/asm/topology.h: In function 'topology_unregister_notifier':
/home/dhruvin/Kernel/3/arch/arm/include/asm/topology.h:42:55: error: no return statement in function returning non-void [-Werror=return-type]
cc1: all warnings being treated as errors
make[4]: *** [drivers/net/wireless/bcmdhd/dhd_linux.o] Error 1
make[3]: *** [drivers/net/wireless/bcmdhd] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
so i guess its a lack of defining topology_register_notifier.
help me.. which identifier is need to be add in which header file?
kernel compiling with GCC 4.8 google toolcahin:
Got this error during generating bcmdhd module:
CC [M] drivers/net/wireless/bcmdhd/wl_cfgp2p.o
drivers/net/wireless/bcmdhd/wl_cfgp2p.c: In function 'wl_cfgp2p_act_frm_search':
drivers/net/wireless/bcmdhd/wl_cfgp2p.c:769:31: error: array subscript is above array bounds [-Werror=array-bounds]
eparams->params.channel_list = htodchanspec(channels);
^
drivers/net/wireless/bcmdhd/wl_cfgp2p.c:769:31: error: array subscript is above array bounds [-Werror=array-bounds]
cc1: all warnings being treated as errors
make[4]: *** [drivers/net/wireless/bcmdhd/wl_cfgp2p.o] Error 1
make[3]: *** [drivers/net/wireless/bcmdhd] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
Click to expand...
Click to collapse
kernel source : Here
OS: BBQ
I removed -Werror flag too. but i got thise error :
drivers/net/wireless/bcmdhd/wl_cfgp2p.c: In function 'wl_cfgp2p_act_frm_search':
drivers/net/wireless/bcmdhd/wl_cfgp2p.c:769:31: warning: array subscript is above array bounds [-Warray-bounds]
error, forbidden warning: wl_cfgp2p.c:769
make[4]: *** [drivers/net/wireless/bcmdhd/wl_cfgp2p.o] Error 1
make[3]: *** [drivers/net/wireless/bcmdhd] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
Click to expand...
Click to collapse
Thank you.
Hello!
I am quite new to this comunity. I am trying to build my own Cyanogenmod 12.1 for the Samsung p5100.
I always get stuck with the following error:
Code:
target Executable: pvrsrvinit (/home/user/Development/Cyanogenmod/android/system/out/target/product/p5100/obj/EXECUTABLES/pvrsrvinit_intermediates/LINKED/pvrsrvinit)
/home/user/Development/Cyanogenmod/android/system/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_init_SGX540_120
/home/user/Development/Cyanogenmod/android/system/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_um_SGX540_120
hardware/ti/omap4/pvrsrvinit/pvrsrvinit.c:8: error: undefined reference to 'SrvInit'
collect2: error: ld returned 1 exit status
make: *** [/home/user/Development/Cyanogenmod/android/system/out/target/product/p5100/obj/EXECUTABLES/pvrsrvinit_intermediates/LINKED/pvrsrvinit] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory `/home/user/Development/Cyanogenmod/android/system'
I would have liked to post this Question in the right forum but i am not allowed to unless i have 10 posts. So i am doing it here.
I have searched the forums already but i didnt find any answer that worked for me.
Any help would be greatly appreciated!
THX!
Are there any solutions?
I run into the same problem.
Code:
.../android/cm-12.1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_init_SGX540_120
.../android/cm-12.1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_um_SGX540_120
hardware/ti/omap4/pvrsrvinit/pvrsrvinit.c:8: error: undefined reference to 'SrvInit'
collect2: error: ld returned 1 exit status
make: *** [.../android/cm-12.1/out/target/product/p5100/obj/EXECUTABLES/pvrsrvinit_intermediates/LINKED/pvrsrvinit] Fehler 1
jameson777 said:
Hello!
I am quite new to this comunity. I am trying to build my own Cyanogenmod 12.1 for the Samsung p5100.
I always get stuck with the following error:
Code:
target Executable: pvrsrvinit (/home/user/Development/Cyanogenmod/android/system/out/target/product/p5100/obj/EXECUTABLES/pvrsrvinit_intermediates/LINKED/pvrsrvinit)
/home/user/Development/Cyanogenmod/android/system/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_init_SGX540_120
/home/user/Development/Cyanogenmod/android/system/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_um_SGX540_120
hardware/ti/omap4/pvrsrvinit/pvrsrvinit.c:8: error: undefined reference to 'SrvInit'
collect2: error: ld returned 1 exit status
make: *** [/home/user/Development/Cyanogenmod/android/system/out/target/product/p5100/obj/EXECUTABLES/pvrsrvinit_intermediates/LINKED/pvrsrvinit] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory `/home/user/Development/Cyanogenmod/android/system'
I would have liked to post this Question in the right forum but i am not allowed to unless i have 10 posts. So i am doing it here.
I have searched the forums already but i didnt find any answer that worked for me.
Any help would be greatly appreciated!
THX!
Click to expand...
Click to collapse
I found a solution.
add
Code:
<project name="CyanogenMod/android_device_samsung_omap4-common" path="device/samsung/omap4-common" remote="github" revision="refs/heads/cm-12.1" />
to
Code:
roomservice.xml
and then run
Code:
./extract-files.sh
with your device connected. The proprietary blobs will be downloaded and the error is gone.
OldSparky said:
I found a solution.
add
Code:
<project name="CyanogenMod/android_device_samsung_omap4-common" path="device/samsung/omap4-common" remote="github" revision="refs/heads/cm-12.1" />
to
Code:
roomservice.xml
and then run
Code:
./extract-files.sh
with your device connected. The proprietary blobs will be downloaded and the error is gone.
Click to expand...
Click to collapse
I'm trying to build a maguro 12.1 image and this didn't work. The build is still dying on:
Code:
target Strip: ping (/Cyanogenmod/out/target/product/maguro/obj/EXECUTABLES/ping_intermediates/ping)
target Executable: ping6 (/Cyanogenmod/out/target/product/maguro/obj/EXECUTABLES/ping6_intermediates/LINKED/ping6)
target Executable: pngtest (/Cyanogenmod/out/target/product/maguro/obj/EXECUTABLES/pngtest_intermediates/LINKED/pngtest)
target Executable: pvrsrvinit (/Cyanogenmod/out/target/product/maguro/obj/EXECUTABLES/pvrsrvinit_intermediates/LINKED/pvrsrvinit)
target Strip: librilutils (/Cyanogenmod/out/target/product/maguro/obj/lib/librilutils.so)
/Cyanogenmod/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_init_SGX540_120
/Cyanogenmod/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lsrv_um_SGX540_120
hardware/ti/omap4/pvrsrvinit/pvrsrvinit.c:8: error: undefined reference to 'SrvInit'
Im pretty late but have the same issue have any of you guys x0ra , jameson777, OldSparky be able to fix it?
Build CM; "fatal error: soc/qcom/lge/board_lge.h: No such file or directory"
Here is the full error:
/home/android/android/system/kernel/lge/msm8916/drivers/leds/leds-qpnp.c:31:36: fatal error: soc/qcom/lge/board_lge.h: No such file or directory
#include <soc/qcom/lge/board_lge.h>
^
compilation terminated.
make[4]: *** [drivers/leds/leds-qpnp.o] Error 1
make[3]: *** [drivers/leds] Error 2
make[2]: *** [drivers] Error 2
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/android/android/system/kernel/lge/msm8916'
make: *** [TARGET_KERNEL_BINARIES] Error 2
make: Leaving directory `/home/android/android/system'
I was building for the LG H631 and it had been building for a few minutes. Any suggestions?
Hi,
Thanks for using XDA Assist.
I guess it's fixed now: http://forum.xda-developers.com/android/software/cyanogenmod-12-1-h631-ms631-10j-10j-t3259281/
Thread closed.