Choosing a Car Holder - Desire Accessories

I'll be driving around South Africa for a month next October and want to use my Desire as a GPS navigator. Don't yet know what car I'm going to be renting and even if I did, the rental company could easily give me a different (but similar) one when I get there. Can anyone suggest a reliable holder which I can use with a charger connected? I'm guessing that one which sticks to the windscreen would be a safer bet because it's more universal than an air-vent version but not sure if the phone will overheat. Looking for something sturdy that doesn't let the phone vibrate too much.
Thanks.

lambada24 said:
I'll be driving around South Africa for a month next October and want to use my Desire as a GPS navigator. Don't yet know what car I'm going to be renting and even if I did, the rental company could easily give me a different (but similar) one when I get there. Can anyone suggest a reliable holder which I can use with a charger connected? I'm guessing that one which sticks to the windscreen would be a safer bet because it's more universal than an air-vent version but not sure if the phone will overheat. Looking for something sturdy that doesn't let the phone vibrate too much.
Thanks.
Click to expand...
Click to collapse
Buy a cheap one, no more than 5 bucks. Every single car holder is made from poor quality plastic.

lambada24 said:
I'll be driving around South Africa for a month next October and want to use my Desire as a GPS navigator. Don't yet know what car I'm going to be renting and even if I did, the rental company could easily give me a different (but similar) one when I get there. Can anyone suggest a reliable holder which I can use with a charger connected? I'm guessing that one which sticks to the windscreen would be a safer bet because it's more universal than an air-vent version but not sure if the phone will overheat. Looking for something sturdy that doesn't let the phone vibrate too much.
Thanks.
Click to expand...
Click to collapse
There are 2 kinds of holders first choose the one you want then look it up on Ebay or Clove.
Active e.g. search google for Brodit Active Holder - HTC Desire
Passive e.g. search google for Brodit Passive holder with tilt swivel - HTC Desire

Related

Car Cradle/Mount for Desire

Hi,
Has anyone purchased a car mount for their desire?
My Desire should hopefully arrive tomorrow and I'm trying to get some accessories for it! The car kit is fairly essential, I have the bluetooth radio that supports A2DP so I'm very excited!
Could anyone recommend a decent car mount?
I have a suction one for my N95 but I think I'd rather one that clips into one of the vents.
I`m waiting for Brodit to release one for the desire, supposed to be soon.
I used their active kit for my G2/Hero and its good. Easy to fit into your car, took 5mins, you have to buy depending on your make/model and where you want it mounted.
Look at the 'Desire Accessories':
http://www.mobilefun.co.uk/trailblazer-universal-car-charger-and-holder-p22954.htm
Had it for several days... its cheap £9.99 and holds the phone and charges it as well! Delivery is megaquick too.
I read somewhere that the nexus one brodit is supposed to work with the desire - who's brave enough to try it now!?
paulruk said:
I`m waiting for Brodit to release one for the desire, supposed to be soon.
I used their active kit for my G2/Hero and its good. Easy to fit into your car, took 5mins, you have to buy depending on your make/model and where you want it mounted.
Click to expand...
Click to collapse
Brodit have told me its imminent and to check the website for release (dsldevelopments dot com) within 14 days.
I've used them for years, just replacing the holder on the mount for each new phone.
MOD EDIT - Moved to Accessories forum
Hi,
I was really suprised when tried my old brodit holder for iphone 3G - its almost ideally fitted for Desire too No need to buy new one, hurrey!
jimmythekey said:
Hi,
Has anyone purchased a car mount for their desire?
My Desire should hopefully arrive tomorrow and I'm trying to get some accessories for it! The car kit is fairly essential, I have the bluetooth radio that supports A2DP so I'm very excited!
Could anyone recommend a decent car mount?
I have a suction one for my N95 but I think I'd rather one that clips into one of the vents.
Click to expand...
Click to collapse
radskman said:
Hi,
I was really suprised when tried my old brodit holder for iphone 3G - its almost ideally fitted for Desire too No need to buy new one, hurrey!
Click to expand...
Click to collapse
Isnt the connection different for the iphone or is it a passive holder?
jannen said:
Look at the 'Desire Accessories':
http://www.mobilefun.co.uk/trailblazer-universal-car-charger-and-holder-p22954.htm
Had it for several days... its cheap £9.99 and holds the phone and charges it as well! Delivery is megaquick too.
Click to expand...
Click to collapse
Yes I'm going for this too , looks like the mutts nuts
ferryrich said:
Brodit have told me its imminent and to check the website for release (dsldevelopments dot com) within 14 days.
I've used them for years, just replacing the holder on the mount for each new phone.
Click to expand...
Click to collapse
Silly question, but wont the Brodit Mobile Phone Active Holder Tilt Swivel for Nexus One be ok for the Desire? It's on the dlsdevelopments website.
johnbanks said:
Silly question, but wont the Brodit Mobile Phone Active Holder Tilt Swivel for Nexus One be ok for the Desire? It's on the dlsdevelopments website.
Click to expand...
Click to collapse
Ask brodit theyre fast at resonding. I`d say it might not work as the connections might not align up. I`d try and wait a few weeks for the desire one
to appear.
Silly question, but wont the Brodit Mobile Phone Active Holder Tilt Swivel for Nexus One be ok for the Desire? It's on the dlsdevelopments website.
Click to expand...
Click to collapse
Ask brodit theyre fast at resonding. I`d say it might not work as the connections might not align up. I`d try and wait a few weeks for the desire one
to appear.
Click to expand...
Click to collapse
I emailed them and they said it wouldnt fit due to the clearance being 0.1mm
We're out of stock of Nexus One - but we get some I will test it.
Desire Brodit are on the site coming soon - but there is no date.
jannen said:
Look at the 'Desire Accessories':
.mobilefun.co.uk/trailblazer-universal-car-charger-and-holder-p22954.htm
Had it for several days... its cheap £9.99 and holds the phone and charges it as well! Delivery is megaquick too.
Click to expand...
Click to collapse
Really liked the look of this but I have an Audi A3 and the car cigarette lighter is housed within the ashtray about 3 inches from the outer dashboard. I doubt the trailblazer will fit.
Also it looks like the holding parts would go right over the volume controls on the Desire like it does on the HD2.
MINI WEIGHTED CUSHION FRICTION MOUNT with UNIVERSAL HOLDER for MOBILES SMART PHONES MP3 (SKU 5043)
I have just ordered this one for my desire, wanted something that wasnt a sucker mount and I dont like the airvent mounts, I also wanted something that meant that I could turn the desire from horizontal to vertical very easily without having to dismantle the device or struggle in doing so, lastly I wanted something that meant I could easily fit into another car quickly if i needed it, found this and it seems to fit the bill nicely, I have read up on the reviews on this mount with a garmin attatchment and they have all come back hugely favourable, love the fact that if i wanted to add another phone to the mount in the future all i have to do is to buy another back plate instead of the entire mount. was sceptical at first haven never seen a friction dash mount before but after reading the reviews and watching the video on the link i have provided and it only being £18.32 inc delivery i thought why not, will post up when i have received it and let you know how it is
buybits.com/product.aspx?id=5043
I have ordered the Nexus Brodit mount and it in fact does not fit as the Desire is 0.5mm wider and thicker.
So i have now ordered the Desire one from morpethmobiles.co.uk and should be receiving early next week so will post some pics
keleko said:
I have ordered the Nexus Brodit mount and it in fact does not fit as the Desire is 0.5mm wider and thicker.
So i have now ordered the Desire one from morpethmobiles.co.uk and should be receiving early next week so will post some pics
Click to expand...
Click to collapse
As I have said here, I think they may be selling the Nexus mount as the Desire mount.
i suspect that aswell because i talked to brodit directly 3/4 days ago and they said it should take at least 2 weeks for the holder to be available.
<START RANT>
It annoys me some shops are selling Nexus accessories as Desire ones - like this dock and also Clove are marketing the Proporta Alu Leather case for both the Nexus and the Desire.
If Brodit and Proporta think it necessary to redesign their accessories to fit the Desire, shops shouldn't be selling the Nexus versions as if they were designed for the Desire. I am sure Brodit and Proporta would have been delighted if their existing accessories would fit as they would increase their market without all the new R&D costs.
I would be very annoyed if I bought something as designed specifically for the Desire, only to find in a few weeks that the manufacturer had brought out a version that really was designed just for the Desire.
<END RANT>
norm2002 said:
As I have said here, I think they may be selling the Nexus mount as the Desire mount.
Click to expand...
Click to collapse
Thats rubbish, if it is then i'll kick off big time

car holders!

Any one seen any nice car holders, I like the look of the brodit ones but I dont think they have updated their range yet.
Been using Brodit for a while now, love the custom mounts they do for almost every car on the road. Still waiting on the i9000 holder, but imagine it will be similar to their i5700 one, just getting a little impatient now, they are normally quicker than this at putting out new holders.
I received this from Brodit support yesterday:
Hi!
Thank for the interest in our products.
We have this under construction so please check our web for updates.
As soon as the holders are ready we have this ready it will be on our web.
But due to summer vacation we can’t say any clear date.
Best Regards
Click to expand...
Click to collapse
So I guess it will still take some time ...
there's someone on ebay with 3 different models, ranging from $10.74 to $13 (vent mount, and two different windshield mounts - one of which appears to be very similiar to the OEM one samsung australia dealers are displaying, ie it will mount to driver's door window as well)
but the ebay seller's prices include shipping from Hong Kong - they're specific to the i9000, so i figured at the price, i'd grab one till Tmo USA had theirs up
his do not include any charger but as ive already got a Tmo car charger, i'm good to go for now
From Brodit:
Thank you for the mail.
We hope to release holders for this in the middle of August.
dakine said:
From Brodit:
Thank you for the mail.
We hope to release holders for this in the middle of August.
Click to expand...
Click to collapse
Yikes! Its just a piece of moulded plastic and a USB connector.
TravUK said:
Yikes! Its just a piece of moulded plastic and a USB connector.
Click to expand...
Click to collapse
I bought this to tie me over, it's really cheap and doesn't look half bad I think: cgi.ebay.com/UNIVERSAL-CAR-MOUNT-HOLDER-SAMSUNG-i9000-GALAXY-S-/120580246943?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item1c13248d9f
Got one of these as well: cgi.ebay.co.uk/Samsung-Bluetooth-Visor-Car-Kit-HF1000-Brand-New-/140408962166?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item20b106bc76
TravUK said:
Yikes! Its just a piece of moulded plastic and a USB connector.
Click to expand...
Click to collapse
maybe they will be special!!
Brodit is a swedish company and normally nearly everybody in sweden is off during july. I guess that explains.
Sent from my GT-I9000 using XDA App
dakine said:
I bought this to tie me over, it's really cheap and doesn't look half bad I think: cgi.ebay.com/UNIVERSAL-CAR-MOUNT-HOLDER-SAMSUNG-i9000-GALAXY-S-/120580246943?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item1c13248d9f
Got one of these as well: cgi.ebay.co.uk/Samsung-Bluetooth-Visor-Car-Kit-HF1000-Brand-New-/140408962166?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item20b106bc76
Click to expand...
Click to collapse
yeah found same item on ebay UK, though from HK, but like you say will do until brodit release theres.
I ordered this: http://cgi.ebay.co.uk/Dash-Genie-Phone-Holder-Car-Kit-Samsung-i9000-Galaxy-S-/200488583857?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item2eae0d02b1
with my new Galaxy S. Hope to get them both today and test them out.
wuoma said:
I ordered this: http://cgi.ebay.co.uk/Dash-Genie-Phone-Holder-Car-Kit-Samsung-i9000-Galaxy-S-/200488583857?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item2eae0d02b1
with my new Galaxy S. Hope to get them both today and test them out.
Click to expand...
Click to collapse
Let us know how this works out, I did see this but wasnt too sure how stable it would be, especially through the bends!!
dakine said:
I bought this to tie me over, it's really cheap and doesn't look half bad I think: cgi.ebay.com/UNIVERSAL-CAR-MOUNT-HOLDER-SAMSUNG-i9000-GALAXY-S-/120580246943?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item1c13248d9f
Got one of these as well: cgi.ebay.co.uk/Samsung-Bluetooth-Visor-Car-Kit-HF1000-Brand-New-/140408962166?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item20b106bc76
Click to expand...
Click to collapse
For now, I've 'modified' my Brodit HD1 holder to fit my Galaxy S. Which seems to work ok. Just wish the GPS was a bit more accurate at times.
kirandeep said:
Let us know how this works out, I did see this but wasnt too sure how stable it would be, especially through the bends!!
Click to expand...
Click to collapse
The Galaxy S is light enough to stay put by itself on the Dash Genie. Though I found that the charging cable can pull on it and eventually un-stick it. I have to ensure the cable stays put and in the right position. It's not the bends that matter, more the potholes. And if you have to touch it it's fiddly. Neat idea, but would not buy it again.
i ordered ths one from ebay - it's specific to the i9000 - http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
figured i'd use it till Tmo came out with the Samsung OEM unit here in the states - but after seeing the price for the Samsung unit on techbuy in australia (iirc either $79 or $89 AUD) i might just stay with this one
same seller on ebay has another for a couple bucks more that looks real similiar to the samsung one techbuy has pictured on their web - it looks like it will turn a full 180 degrees in the horizontal plane so you could mount it on the driver's door window -
and he has a 3rd unit that is meant for vent mounting
Try Arkon.
Look at this video:
http://www.youtube.com/watch?v=YulhYNgR6EM
Here is their website:
http://www.arkon.com/Smartphone_Holder.php
The company is based in the US.
I'm interested to here feedback on the dash genie http://cgi.ebay.co.uk/Dash-Genie-Ph...UK_Mobiles_Accessories_RL&hash=item2eae0d02b1 does the phone securely stick to the holder (i.e the phone doesnt fall out when cornering hard)? - Does it work aswell in landscape as portrait? Is the red dot on the holder simply a magnet (does that affect signal or GPS?) ? - From the video on the auction it looks brilliant - I drive a 1 series similar to the one in the video too - so I know it will work on my dash
kirandeep said:
yeah found same item on ebay UK, though from HK, but like you say will do until brodit release theres.
Click to expand...
Click to collapse
I actually received it today. First impresson: cheap but well designed. It comes with a little stick on mount so you can also stick the thing to your dash instead of the windscreen. The clamp is spring loaded so it can fit the phone even if it's in a case. I like it.
larryccf said:
i ordered ths one from ebay - it's specific to the i9000 - http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
figured i'd use it till Tmo came out with the Samsung OEM unit here in the states - but after seeing the price for the Samsung unit on techbuy in australia (iirc either $79 or $89 AUD) i might just stay with this one
same seller on ebay has another for a couple bucks more that looks real similiar to the samsung one techbuy has pictured on their web - it looks like it will turn a full 180 degrees in the horizontal plane so you could mount it on the driver's door window -
and he has a 3rd unit that is meant for vent mounting
Click to expand...
Click to collapse
Did you receive the car mount yet, i am curious if it is ok?
I also ordered this one but haven't received it yet.
Regards
Peter
yeah - it'll do fine
definitely strong enough, grip wise on the unit - in fact a little too tight, so i dremel'd out the lower capture points to give it a little relief in the vertical axis (vertical when the holder is in "landscape" position
the mechanical action on the locking cam (that locks the suction cup) feels good, real solid
and the mechanical action on the capture nut that tightens on the ball socket is actually impressive - pretty infinitely adjustable, easy to find that sweet spot where the ball socket is stiff enough to hold the phone at the angle / position you want, while not letting the holder move or shift, plus with the wgt of the vibrant so light, it's not inclined to

Car Dock

I want the official car dock... simple right?
Problem is that I live in Canada, HTC won't ship it here or to a mailbox on their side of the border. They require a US credit card or whatever. Is there any way to get these from elsewhere?
Try the usual suspects...
My recommendation is that you try to get it used from either Amazon or Ebay, I don't think that you have any other options.
I don't have the original dock, as my car has integrated bluetooth, but I bought this car mount: Kensington Windshield /Vent Car Mount with Quick-Release Cradle for iPhone/iPod touch. Yes, I know what it says, but it works perfectly with the N1, especially if you have a case and don't want to take your phone out of it every time you get in your car.
As far as a car charger, you need to get this: Motorola Vehicle Power Adapter MicroUSB Rapid Rate Charger, there is no other charger that works better than this, and it is actually very cheap (US$ 5.49). It will actually charge your phone while using navigation, with GPS and bluetooth active, and full screen brightness, that's how good this charger is.
I actually modded the mount so it will hold the cable, I will try to post a picture later on.
I hope that this helps.
I really want the official dock as it has speakers and hookups for 3.5mm so I can listen to music from my phone.
ebay, I tried that. I don't want to pay $200 for a car dock. They are so over priced on there. Amazon.com doesn't ship most of their stuff to canada, however I did find it on there (thanks). I will try purchasing one of these and see what happens.
In the US does HTC have a store you can walk into to buy this dock? I find it doubtful but I'm going on vacation in the US next week, thinking maybe I could pick one up...
No store...
No, HTC doesn't have stores in the US at all. I know that a few months ago, some T-Mobile stores were carrying some of the N1 accessories, but I think that that is a very long shot. If you are coming here, I would recommend that you order it from HTC and have it express mailed to wherever you will be staying, that should solve your problem. Good luck.
Except for how they don't take Canadian credit cards...
You can have mine for $60 (the price I paid after tax) + shipping. Do you want the desktop dock too?
http://www.comgateway.com/CGW/com.comgateway.cgw.Home.do?4403cgtyxsd=VCcJgLeKfUPpJXO8/HboxjXm14w=
I used these guys to get my Nexus one to Australia. They are a mail forwarding company. they don't even charge you a commission over and above normal shipping afaik, they get a special deal with DHL and make money on the difference.
As for the credit card, mine worked when i put my normal address for the street, but put a US state as the state.
Im gonna get this carholder: http://goo.gl/IJdUG
irishrally said:
You can have mine for $60 (the price I paid after tax) + shipping. Do you want the desktop dock too?
Click to expand...
Click to collapse
hey sorry for the thread jack..shoot me an email ill take it if its in good conditions. Is it the htc one??? Are u throwing the desktop one too?
thanks
rault18 said:
hey sorry for the thread jack..shoot me an email ill take it if its in good conditions. Is it the htc one??? Are u throwing the desktop one too?
thanks
Click to expand...
Click to collapse
Thanks a lot for the thread jack. I've been trying to find one of these for months.

Kickass Car Holder!

got this installed in my mitsubishi lancer ralliart! mounted it to my handbrake! there is a microphone mounted on the holder! just had to plug it in to the ciggarette lighter jack and a cable to the AUX on my stereo! and voila handsfree kit for 25 pounds!
really well made! fits the phone "like a glove"
http://www.mobilefun.co.uk/htc-desire-hd-car-mount-p26829.htm
MMmmm, that is pretty
Really really nice car holder
wow very nice
does it work with a case on?
winwiz said:
wow very nice
does it work with a case on?
Click to expand...
Click to collapse
was going to ask this question aswell? Does it?
I bought one of these when they first came out - really excellent, as are all Kidigi holders. The speaker and microphone are high quality, good enough to allow you to use it easily as a hands-free kit. No distortion to the speaker, but the colied cable is a bit of a pain as it can put tension on the cord clamp at the speaker end - I wish they's make these things with a straight cord!
Other than that I'd strongly recommend this active holder. Works brilliantly with SatNav as well!
It does not work with a case on - it's designed to fit the phone, not the zillions of different case designs that you can get for the DHD.
That is one big ass connector, i bought this one
http://www.amazon.com/gp/product/B003SE6LD0/ref=ox_ya_os_product
so good so far.
I ordered one from that company. They did not advise me that they were out of stock untill they had my money.
I am still waiting six weeks later. I will not be using them again and would reccomend others going to a more reliable vendor.
I just purchased one from the distributor listed on the manufacturers website.
Free shipping world wide and only $49.90 USD.
mhardyman said:
I ordered one from that company. They did not advise me that they were out of stock untill they had my money.
I am still waiting six weeks later. I will not be using them again and would reccomend others going to a more reliable vendor.
Click to expand...
Click to collapse
I've had the same problem with MobileFun; ordered a Desire HD case with kickstand - knowing it was out of stock for "1 to 2 weeks" - six weeks later, their website still states the same and no item. I cancelled the order and bought from Expansys with no delay and £5 cheaper too...

Cheap Car Holder

I use my N4 for navigation and to monitor my car's ODBII output. I needed a windshield mounted holder that was secure but easy to install/remove.
There are a bunch on ebay from China but I wanted one faster so I found a US supplier. Very simple design that could be used for most any bar type device; phone, iPod, GPS ...
For $4.65 I cannot complain: Universal phone holder
The seller shipped fast with a USPS tracking number.
Does it stick to the windshield firmly? I never actually bought one of these before so I'm a bit skeptical about how well it'll work since it's from a eBay seller.
chlehqls said:
Does it stick to the windshield firmly? I never actually bought one of these before so I'm a bit skeptical about how well it'll work since it's from a eBay seller.
Click to expand...
Click to collapse
Yup, you can't pull it off. You have to use the release to remove it. We've had temperatures from 30-70F and it's still stuck.
Thanks, about to buy one.
bought one.. how long did it take to arrive?
I hope it'll arrive to Canada fast. The seller shipped it but didn't provide a tracking number.... weird :S
beegbear said:
bought one.. how long did it take to arrive?
I hope it'll arrive to Canada fast. The seller shipped it but didn't provide a tracking number.... weird :S
Click to expand...
Click to collapse
It arrived in less than a week, I don't recall the exact time period, sorry.
I switched the mount to my 1994 Blazer and back again without issue. I mention this because old windshields tend to collect "stuff" on them and sometimes things don't stick well. I did not clean the windshield, it just stuck on.
Shipping time
I just checked, I purchased it April 3rd, it arrived April 8th.:cyclops:
Yeah, mine came pretty fast. Came in a couple of days.
And this thing is pretty awesome for a car holder. It does feel a bit cheap and you probably will have to be bit more careful with it, but basically, stick it and forget is the motto for this thing.
4.5/5 is my rating for this.
Sent from my Nexus 4
still happy
I've been using mine for about a month, multiple car changes, it still works as advertised. The only issue is if you goo over REALLY rough roads it tends to bounce around a bit. I just lower it so that the bottom touches the dash and the issue goes away.
I think I'll buy two more for my other cars so I don't have to keep swapping it out.
That's an Exogear knockoff.
http://www.exogear.com/products-exomount-car-mount-holder.html

Categories

Resources