Do we have a working method to root? I have tried jims script and my phone hangs in a boot loop any other luck/methods out there.
Att / atrix2 on the leak jim posted.
Sent from my MB865 using xda premium
I used the root zip from Jim's original ICS leak post, I assume you have the same. When I rooted, I ran the root.bat and waited until it said waiting for device. Then I enabled usb debugging and the rest took care of itself. *Note - The phone will reboot two or three times, but that's normal, and it should be rooted. That's how I did it, and it worked the first time. I hope that helps.
i think the driver on your PC is old, so it is not agree the phone, pls down and setup the update moto driver.
thanhthao2002 said:
i think the driver on your PC is old, so it is not agree the phone, pls down and setup the update moto driver.
Click to expand...
Click to collapse
huh?
in every thread posting an ics leak there is also a link or guide on how to root it make sure you follow exactly what it says and search before making new threads dont need to clog up the forum
in every thread posting an ics leak there is also a link or guide on how to root it make sure you follow exactly what it says and search before making new threads dont need to clog up the forum
Click to expand...
Click to collapse
+1
Sent from my Atari Falcon030
not rooring
41rw4lk said:
I used the root zip from Jim's original ICS leak post, I assume you have the same. When I rooted, I ran the root.bat and waited until it said waiting for device. Then I enabled usb debugging and the rest took care of itself. *Note - The phone will reboot two or three times, but that's normal, and it should be rooted. That's how I did it, and it worked the first time. I hope that helps.
Click to expand...
Click to collapse
i've followed all the steps but everytime
i get the same thing and its not going any further * daemon not running. starting it now *
* daemon started successfully *
i too am having the same problem. in most threads it only reads download zip, run the batch file, phone in debugging mode, etc. but i cannot root it.
*daemon not running. starting it now*
*daemon started successfully*
using windows 7 on my laptop, phone is in mass storage mode and is seen by the laptop. run as user and as administrator produces same effect. but folder at root of c: drive and desktop still the same.
solved it
jspugh said:
i too am having the same problem. in most threads it only reads download zip, run the batch file, phone in debugging mode, etc. but i cannot root it.
*daemon not running. starting it now*
*daemon started successfully*
using windows 7 on my laptop, phone is in mass storage mode and is seen by the laptop. run as user and as administrator produces same effect. but folder at root of c: drive and desktop still the same.
Click to expand...
Click to collapse
download the new moto device manager 2.2.26 uninstall all other moto drivers install this and run root bat again and everything runs smoothly
Do u guys have adb set up
Drivers are here and some other good stuff
http://forum.xda-developers.com/showthread.php?t=1784689
Absolutely cannot get phone working with ADB
Be sure to thank cogeary for the link
Sent from my MB865 using xda premium
thank you, will actually put 2.2.26 on another box which my phone has NOT been on and give that a shot.
---------- Post added at 04:10 PM ---------- Previous post was at 03:50 PM ----------
eddiemc12 said:
download the new moto device manager 2.2.26 uninstall all other moto drivers install this and run root bat again and everything runs smoothly
Click to expand...
Click to collapse
installed 2.2.26 on an old xp box. worked great! thank you, now rooted!
---------- Post added at 04:13 PM ---------- Previous post was at 04:10 PM ----------
chrisn91 said:
Do u guys have adb set up
Drivers are here and some other good stuff
http://forum.xda-developers.com/showthread.php?t=1784689
Absolutely cannot get phone working with ADB
Be sure to thank cogeary for the link
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
downloaded drivers from here, thanks for the link. i had fxz from 2.3.6 to 2.3.5, but that was awhile ago. guess i just needed new drivers.
sent both you guys some thanks, and cogeary as well. no thanks to those other two. i have been following this forum since October 2011 and only recently joined, and that was to give altered some thanks on the awesome work he has done and the help he has given people like myself. i usually search first before asking and don't make many posts, as you can tell. i have seen the amount of ridiculousness in all these threads, and yes, even told other people to use the search. if you don't know the answer, it doesn't help to respond with a "just search" anymore...so just don't post. all those "just search" posts clog our s**t up even more than the stupid posts or threads.
adb out of date error
if you are getting this error, do not do the crazy things that are suggested, just copy the three new files list below in the zip, they are 2012 version and overwrite the ones that were in the root download
sharingan92 said:
in every thread posting an ics leak there is also a link or guide on how to root it make sure you follow exactly what it says and search before making new threads dont need to clog up the forum
Click to expand...
Click to collapse
Sorry but when I post on those threads with a question I get flooded by idiots asking questions there are explained in the first post or later in the thread. So instead of making me look bad why not point you finger at some of the meaning less threads on the DEV side or the other ones in general.
I normally lurk here and have no issues. I provide feedback and important files if I have them. Its people like you who are quick to react that "clog" this place up.
Sent from my MB865 using xda premium
Emoslayer8 said:
Sorry but when I post on those threads with a question I get flooded by idiots asking questions there are explained in the first post or later in the thread. So instead of making me look bad why not point you finger at some of the meaning less threads on the DEV side or the other ones in general.
I normally lurk here and have no issues. I provide feedback and important files if I have them. Its people like you who are quick to react that "clog" this place up.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Did you get it fixed? I have a couple of things for you to try. We had a few other have the same issue as you are, last week with the root script.
Are you using my script that I posted with the leak?
Try and unzip it and put the folder on your desktop or in C:\ and try and run it from there.
Also are you on Windows 7 or XP, if XP that might be an issue, all the exe's that I have included are most likely not 32 bit XP-able. I am not 100% since I did a lot of googling to get them. I just remember that most people that have has success were on Win 7 and did what I mention about unzipping to the desktop or C:\.
Hope that helps. Please let us know.
jimbridgman said:
Did you get it fixed? I have a couple of things for you to try. We had a few other have the same issue as you are, last week with the root script.
Are you using my script that I posted with the leak?
Try and unzip it and put the folder on your desktop or in C:\ and try and run it from there.
Also are you on Windows 7 or XP, if XP that might be an issue, all the exe's that I have included are most likely not 32 bit XP-able. I am not 100% since I did a lot of googling to get them. I just remember that most people that have has success were on Win 7 and did what I mention about unzipping to the desktop or C:\.
Hope that helps. Please let us know.
Click to expand...
Click to collapse
if its any help, i have windows 7 home on my laptop that i usually use with my phone. i used the batch file from your zip. i put it on the desktop, at the root of c, tried running as admin and as user, all to no avail. put updated drivers on an xp box and used your zip again and it worked fine.
jimbridgman said:
Did you get it fixed? I have a couple of things for you to try. We had a few other have the same issue as you are, last week with the root script.
Are you using my script that I posted with the leak?
Try and unzip it and put the folder on your desktop or in C:\ and try and run it from there.
Also are you on Windows 7 or XP, if XP that might be an issue, all the exe's that I have included are most likely not 32 bit XP-able. I am not 100% since I did a lot of googling to get them. I just remember that most people that have has success were on Win 7 and did what I mention about unzipping to the desktop or C:\.
Hope that helps. Please let us know.
Click to expand...
Click to collapse
I will try your script again when I get home. I'll make sure to back up this time I had to reinstall the leak to get it to boot. And I'm running win7 64x, debian, and Ubuntu 12.4. Haha maybe I'll do it off my raspberry pi jk jk
I'll let you know jim. I just built a new PC. Lost all my old data. RAID2RAID only saved a little of my raid0 from my old build. Oh well. Thanks for the quick response.
Also I tried windows 7 64x before with moto drivers and at the time I know my adb was working I have been making apps for a project I have reading from the serial port that my arduino writes to on USB host mode on an Acer tablet.
Sent from my MB865 using xda premium
Emoslayer8 said:
I will try your script again when I get home. I'll make sure to back up this time I had to reinstall the leak to get it to boot. And I'm running win7 64x, debian, and Ubuntu 12.4. Haha maybe I'll do it off my raspberry pi jk jk
I'll let you know jim. I just built a new PC. Lost all my old data. RAID2RAID only saved a little of my raid0 from my old build. Oh well. Thanks for the quick response.
Also I tried windows 7 64x before with moto drivers and at the time I know my adb was working I have been making apps for a project I have reading from the serial port that my arduino writes to on USB host mode on an Acer tablet.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Try it on your ubuntu 12.04, if windows is still giving you issues. I have both an sh and bat in the zip file.
Also the Moto drivers don't really matter since all the stuff I use is lower level (adb, is all you need, with it's drivers that come with the SDK, and I have included for both the windows and Linux in the ICS root zip).
Related
Hey guys. This is my first Android phone, and I'm trying to get ready to root it. I read the steps by toast in thread 690762 (it won't let me post a link due to "new member restrictions") but can't figure out how to do the adb shell commands. I have downloaded the Google SDK, and also eclipse, and am just utterly confused now. I've never really approached a project like this. Any help would be much appreciated.
yeah i had trouble setting it up also. what os are you using, by the way, some people might give u hell about posting this here.
Windows 7. First time posting in these forums, so I apologize in advance to anyone who may be annoyed with me for posting this here, admins may feel free to move this post to a more appropriate section.
in command prompt type
cd/
cd c:/android-sdk/tools
Sent from my Hero CDMA using the XDA mobile application powered by Tapatalk
appreciate the help guys finally got it to work by manully putting adb.exe, adbwinapi.dll, and adbwinusbapi.dll in my windows/system32 folder. took me about 6 hours of googling
thats from my post from a couple days ago, its prolly something with the drivers not being recognized, goto your sdk folder then the tools folder and look for the files and copy and move them to your windows/system32 folder and see if that works. also remember to use administrative access when trying to flash the recovery or really anything. i set mine up to automatically run adb.exe in administrative mode
That did the trick, now stuck on sprint loading animation after flashing stock rooted evo ota update and updated radio image.
Correction: All issues fixed, thanks for your help guys. My EVO is now rooted and running the stock ROM that is rooted with an updated radio.
I wanted to learn the manual ADB method suggested by JCASE in the developemen forum, however i've had trouble understanding, seting up, & using ADB.
I have rooted two two htc eris phones before with JCASE's simple one click root method, so that doesn't realy count. I also roote my Moto Droid, but that was a file that was downloadable by the phone it's self, so that was pretty simple also.
The thunderbolt root seems a little more complicated for my knowledge level, so I've decided to go about it using a youtube tutorial called How To: Root A HTC Thunderbolt ( Easiest Tutorial / Step by step .
this method envolves a program called TB-Auto-Root. I attempted to download it to the PC using slow DSL connection, but it said expected download time is over 8 hours. I followed the same link to my phone and it is at 12% in less than 30min. Can't i Just download it it my phone then copy it to my pc? If so, do I need to copy it directly to the C\ drive, or does it matter?
Thanks in advance, ~Dave
Sub-Standard said:
I wanted to learn the manual ADB method suggested by JCASE in the developemen forum, however i've had trouble understanding, seting up, & using ADB.
I have rooted two two htc eris phones before with JCASE's simple one click root method, so that doesn't realy count. I also roote my Moto Droid, but that was a file that was downloadable by the phone it's self, so that was pretty simple also.
The thunderbolt root seems a little more complicated for my knowledge level, so I've decided to go about it using a youtube tutorial called How To: Root A HTC Thunderbolt ( Easiest Tutorial / Step by step .
this method envolves a program called TB-Auto-Root. I attempted to download it to the PC using slow DSL connection, but it said expected download time is over 8 hours. I followed the same link to my phone and it is at 12% in less than 30min. Can't i Just download it it my phone then copy it to my pc? If so, do I need to copy it directly to the C\ drive, or does it matter?
Thanks in advance, ~Dave
Click to expand...
Click to collapse
First of all, don't use easy roots. If you insist on it, then yes you can download on your phone then transfer it to the PC. Check the MD5 to ensure the file is good. As far as where to put it, I am sure the tutorial should tell you.
Sent from my ADR6400L using XDA Premium App
You should YouTube a video called "thunderbolt adb setup" or something. Set up the Google driver, fix the config file so it works with the thunderbolt (google adb thunderbolt and its one of the first links). The rooting software shouldn't take that long to download, even on slow dsl...
sent from my rooted Thunderbolt with das BAMF 3.0 rc4
And follow the root guide stickied in the forum
sent from my rooted Thunderbolt with das BAMF 3.0 rc4
admiralspark said:
And follow the root guide stickied in the forum
sent from my rooted Thunderbolt with das BAMF 3.0 rc4
Click to expand...
Click to collapse
Wish people would read before responding
on auto root when i get to the step of pressig 1 it responds that "ADB is not a vlid internal or external......" what does adb have to do with auto root? please help me root my device.... thanx for every ones help, ~Dave
I replied to the other thread but if you insist on using the auto root I can only say this:
The auto root script does EXACTLY what is described in JCase's root sticky. It just automates the process so less user interaction is required. (i.e. It types in the commands for you) That is what it has to do with adb.
Sent from my HTC Thunderbolt
JBO1018 said:
I replied to the other thread but if you insist on using the auto root I can only say this:
The auto root script does EXACTLY what is described in JCase's root sticky. It just automates the process so less user interaction is required. (i.e. It types in the commands for you) That is what it has to do with adb.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
it might...but automation is prone to unforeseen errors, which is why no one recommends it
yareally said:
it might...but automation is prone to unforeseen errors, which is why no one recommends it
Click to expand...
Click to collapse
Which is the reason the only advice I had was to tell him what the auto root has to do with adb.
Sent from my HTC Thunderbolt
yareally said:
it might...but automation is prone to unforeseen errors, which is why no one recommends it
Click to expand...
Click to collapse
Exactly. I did the rooting (and eventually unrooting) manually by simply copying and pasting the commands from the tutorial jcase wrote up into ADB. Process of rooting took me roughly I'd say 25 minutes but honestly its not that hard. Just follow the steps and you'll be just fine.
Oh and unrooting took me all of four minutes to do lol.
Search YouTube for "HTC Thunderbolt root". Find the tutorial by Nat3Mil, explains step by step starting with how to set up adb all the way to installing the custom recovery image. Don't get overwhelmed just take your time. Probably takes about 45 minutes give or take. He did a handful of videos including flashing roms, radios, and kernels. See you on the other side my friend...
how are we to know what is wrong when you are using a tutorial posted on youtube as your guide?
Most of us used jcase tutorial to root. Really, it is very simple to do. You probably don't have the files in the right spot on your pc, or you don't have adb in the right spot.
Wow ok aside from the pricks that are not helping...make sure your phone is in charge only, debug is checked, and make sure you have the HTC drivers installed on your PC, if you downloaded the file onto your phone I'm assuming you didn't install the drivers and that what's probably wrong. Here's the link if ya need it, also make sure you haven't done the latest update if you did its not going to work.
http://www.htc.com/www/SupportDownload.aspx?p_id=312&cat=3&dl_id=1073
Sent from my ThunderBolt using XDA App
oxidant11 said:
Wow ok aside from the pricks that are not helping...make sure your phone is in charge only, debug is checked, and make sure you have the HTC drivers installed on your PC, if you downloaded the file onto your phone I'm assuming you didn't install the drivers and that what's probably wrong. Here's the link if ya need it, also make sure you haven't done the latest update if you did its not going to work.
http://www.htc.com/www/SupportDownload.aspx?p_id=312&cat=3&dl_id=1073
Sent from my ThunderBolt using XDA App
Click to expand...
Click to collapse
They're not bashing the guy.. you're a prick for saying that. OP, if you look in the Thunderbolt help and info thread in the Dev section, there is a llink to a thread that has an ADB auto installer and set up guide
Sent from my ThunderBolt using XDA Premium App
Dont know if you know this but you have use the rear usb ports on the pc or the program doesnt read it also need the htc sync drivers
Sent from my ThunderBolt using XDA Premium App
ScoobarSTI said:
Dont know if you know this but you have use the rear usb ports on the pc or the program doesnt read it also need the htc sync drivers
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
That might be the case with your pc, but usb port has never mattered on my desktop pc, laptop or from within a virtual machine. Perhaps if you attach to some sort of weird device usb like a monitor's usb ports it might.
I would advice the OP to read the tutorial in the development section that's stickied and as a fallback for more information, find a youtube video that explains the same process. I don't know of any links offhand, but I'm sure a 2minute search or less will make a couple show up that do basically what you see in the tutorial sticky thread. However, I would not use the youtube videos alone.
ScoobarSTI said:
Dont know if you know this but you have use the rear usb ports on the pc or the program doesnt read it also need the htc sync drivers
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
Not true on my PC. Sounds like your front ones are messed up. In response to the OP simply watch a youtube video. You are really going to want to learn ADB instead of using one of the auto-rooters. You will still need an ADB connection either way as it is just automated.
oxidant11 said:
Wow ok aside from the pricks that are not helping...make sure your phone is in charge only, debug is checked, and make sure you have the HTC drivers installed on your PC, if you downloaded the file onto your phone I'm assuming you didn't install the drivers and that what's probably wrong. Here's the link if ya need it, also make sure you haven't done the latest update if you did its not going to work.
Click to expand...
Click to collapse
Nobody was trying to be a jerk, but there are 19 different auto root scripts that all have a pretty high possibility of failing at a random point. Leaving you with no clue which step things went wrong at. This makes it really hard to offer any help aside from telling them it is a much better idea to do it the "long" way.
So OP I apologize if you took what I said as being rude. It was not my intention. I was trying to answer what I could without giving bad advice about the problem with the auto script.
Sent from my HTC Thunderbolt
I agree with most everyone else's answers. Don't be afraid to follow the standard method jcase laid out. It's not hard, there's little margin for error so long as you follow the instructions, and it never hurts to learn a little adb knowledge. I came from a DINC, and I never used adb before (I rooted the DINC with unrevoked). It's simple. Getting the proper drivers installed is probably the hardest part for someone not experienced in this department, but even so, still really simple.
I'd avoid the 1 click root's. Like mentioned previously, basically all they are is a batch script that runs the same exact commands you'd be copying and pasting yourself if you followed the jcase tutorial. Given that, there's margin for error as you have no control over it unless you modify the script yourself. You're much better off to listen to most people's advice here and just follow the jcase method.
cstrife999 said:
Not true on my PC. Sounds like your front ones are messed up. In response to the OP simply watch a youtube video. You are really going to want to learn ADB instead of using one of the auto-rooters. You will still need an ADB connection either way as it is just automated.
Click to expand...
Click to collapse
yareally said:
That might be the case with your pc, but usb port has never mattered on my desktop pc, laptop or from within a virtual machine. Perhaps if you attach to some sort of weird device usb like a monitor's usb ports it might.
I would advice the OP to read the tutorial in the development section that's stickied and as a fallback for more information, find a youtube video that explains the same process. I don't know of any links offhand, but I'm sure a 2minute search or less will make a couple show up that do basically what you see in the tutorial sticky thread. However, I would not use the youtube videos alone.
Click to expand...
Click to collapse
No with that program it needs to be the rear usb ports i dont know why its that way but thats how it is. Research it. All my usb ports are in perfect working condition. But for what ever reason you will get that error if you use the front ports.
Sent from my ThunderBolt using XDA Premium App
Sent from my ThunderBolt using XDA Premium App
I'm coming from an iPhone after having all previous gens so I'm completely clueless about Android and the ins/outs of the OS.
I only own MacBooks and curious if:
1. I can root my Skyrocket, if so how?
2. Can I install the Cyanogenmod's?
Also, what exactly are the Cyanogenmods? I've been watching YouTube vids but actually explain what they are and how to install from start to finish on SGS2 SR w/ Macbook.
thanks
cyanogenmod is a custom version of android gingerbread. currently the skyrocket is not supported by cm therefore we do not have cm available. this device is very new so there arent a ton of roms just yet. but the future is promising. you can root your phone on a mac go to this thread and follow the instructions http://forum.xda-developers.com/showthread.php?t=1340710 if you are on android version 2.3.5
This is all pretty confusing to me...I have team viewer installed on my mac...would you be willing to help me out through this program?
I have no idea what teamviewer is i have a windows machine. But i can do my best to talk u through it. First on your phone push menu then settings then applications then development....then turn on usb debuging
Then download this file http://www.holylivingfuck.com/ACS/stuff/Root/Skyrocket-Easy-Root.zip
Now install the usb drivers for the phone which is here http://www.holylivingfuck.com/Crap/Samsung_USB_Driver_for_Mobile_Phones_v1_3_2200_0.exe
When the drivers are done installing plugin your phone and let it fully install
Next unzip the other file you downloaded open the unziped folder, and run the batch/sh file depending on your operating system.
And you should now be rooted
---------- Post added 26th November 2011 at 12:05 AM ---------- Previous post was 25th November 2011 at 11:46 PM ----------
You have to be very careful doing this stuff though. You may want to google. What is rooting an android and also browse around the forums on here and read about rooting and the questions others have posted and the answers they were given before you attempt this. If you mess up rooting or trying to install a custom rom its very easy to break your phone making any mistake. Bottom line is read everything in the skyrocket q&a section general section , and development section about rooting you can before you try it.
silver03wrx said:
I have no idea what teamviewer is i have a windows machine. But i can do my best to talk u through it. First on your phone push menu then settings then applications then development....then turn on usb debuging
Then download this file http://www.holylivingfuck.com/ACS/stuff/Root/Skyrocket-Easy-Root.zip
Now install the usb drivers for the phone which is here http://www.holylivingfuck.com/Crap/Samsung_USB_Driver_for_Mobile_Phones_v1_3_2200_0.exe
When the drivers are done installing plugin your phone and let it fully install
Next unzip the other file you downloaded open the unziped folder, and run the batch/sh file depending on your operating system.
And you should now be rooted
---------- Post added 26th November 2011 at 12:05 AM ---------- Previous post was 25th November 2011 at 11:46 PM ----------
You have to be very careful doing this stuff though. You may want to google. What is rooting an android and also browse around the forums on here and read about rooting and the questions others have posted and the answers they were given before you attempt this. If you mess up rooting or trying to install a custom rom its very easy to break your phone making any mistake. Bottom line is read everything in the skyrocket q&a section general section , and development section about rooting you can before you try it.
Click to expand...
Click to collapse
Thanks, team viewer is a free app that works on mac/PC...allows you to control my computer. .EXE files won't work on a Mac so I'm kind of stuff right?
I would trust you to remote in on my computer and help me if you're willing. Like I said, team viewer is free.
http://www.teamviewer.com/en/download/index.aspx
Thanks
drivers are not needed on a mac or a linux machine.
so ignore the .exe
if you dont do this yourself, you will always be reliant on someone to fix it for you if it messes up in the future. not taking the time to learn it is fkn lazy. if you dont want to learn it, stay stock unrooted, end of story.
Pirateghost said:
drivers are not needed on a mac or a linux machine.
so ignore the .exe
if you dont do this yourself, you will always be reliant on someone to fix it for you if it messes up in the future. not taking the time to learn it is fkn lazy. if you dont want to learn it, stay stock unrooted, end of story.
Click to expand...
Click to collapse
Ok well thanks for the .exe part...
I learn better by watching someone else do a task...if I watched someone do it then I would be good. Same thing when I first got my iPhone, someone remoted in and walked me through the process.
Oh wow so macs dont do not require drivers? Thats cool . Never personally even used anything but a windows machine.. and even if someone rooted for you thats not it youd need to know about using cwm recovery and about flashing roms and odin. And tars and nandroids and titanium backups so someone rooting for you is just going to give u the ability to break your phone even easier then attempting to root.
silver03wrx said:
Oh wow so macs dont do not require drivers? Thats cool . Never personally even used anything but a windows machine.. and even if someone rooted for you thats not it youd need to know about using cwm recovery and about flashing roms and odin. And tars and nandroids and titanium backups so someone rooting for you is just going to give u the ability to break your phone even easier then attempting to root.
Click to expand...
Click to collapse
Jeez, bunch of stuff. Is there a thread that explains all this individually?
A user named qbking has made a bunch of how to videos its not for our phone its for an epic so
There will be dofferences but you can watch them and learn alot about rooting and cwm recovery and flashing roms http://forum.xda-developers.com/showthread.php?t=1009997 theres a link watch his videos youll learn alot. But as i said not our phone so youll still need to read about rooting in our forums. Like i said browse around the general , and q&a and development sections for the skyrocket. And just read everything u see about rooting and flashing roms, and the risks involved if u make a mistake.. lol basically read read read read. There isno easy answer you have to put in the time and research to learn these things
Looking for a post to detailing root and recommended tools.
Thx
Sent from my SCH-I535 using xda premium
Root VZW Galaxy Slll
Try This
http://forum.xda-developers.com/showthread.php?t=1792342
No... go to development forums and freaking learn how to read stickys.
Verizon clearly have the most noobs.
VERIZON GALAXY S 3 (CM10)
Root for VZW GSlll and WINDOWS
This worked first time. IF ARE USING XP you MUST install the Samsung driver first
Enjoy
http://forum.xda-developers.com/showthread.php?t=1792342
---------- Post added at 03:06 PM ---------- Previous post was at 03:01 PM ----------
DROID3R said:
No... go to development forums and freaking learn how to read stickys.
Verizon clearly have the most noobs.
VERIZON GALAXY S 3 (CM10)
Click to expand...
Click to collapse
Yes your Royal High Ass....At once
of course if you just got the phone, and you are used to a much more organized forum...and you're a bit confused, please just PM droid3r.
He'll be sure to tell you where to go Ü
I just had surgery on my arm making it extremely difficult to type..sorry to upset you.
Sent from my SCH-I535 using xda premium
DROID3R said:
No... go to development forums and freaking learn how to read stickys.
Verizon clearly have the most noobs.
VERIZON GALAXY S 3 (CM10)
Click to expand...
Click to collapse
I just had surgery on my arm making it extremely difficult to type...sorry to upset you.
Sent from my SCH-I535 using xda premium
I get this message when I try to do this root. What do I do?
mjbrowny21 said:
I get this message when I try to do this root. What do I do?
Click to expand...
Click to collapse
You need to install the drivers
Sent from my SCH-I535 using xda premium
Thanks
Thanks
I did install the drivers. And ever since I did my phone does not appear in "my computer" anymore when its plugged into the USB. Also I tried it from scratch on a co-workers computer and got the same thing.
Looks like you don't have adb set up correctly. Did you install the Android SDK? Did you then install platform tools? And finally did you edit the windows environment path to include adb?
mjbrowny21 said:
I get this message when I try to do this root. What do I do?
Click to expand...
Click to collapse
Did you try reading the very first question in the FAQ in the thread? Although if the phone stopped showing up, that probably won't help you.
Sent from my Verizon GSIII using Tapatalk 2
Root steps
What OS are you using?
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
mjbrowny21 said:
I did install the drivers. And ever since I did my phone does not appear in "my computer" anymore when its plugged into the USB. Also I tried it from scratch on a co-workers computer and got the same thing.
Click to expand...
Click to collapse
What OS are you using?
Bleelas said:
Looks like you don't have adb set up correctly. Did you install the Android SDK? Did you then install platform tools? And finally did you edit the windows environment path to include adb?
Click to expand...
Click to collapse
I did not do any of that. Didn't see that anywhere in any of the instructions I read. Not exactly sure how to do all that.
I'm using Windows 7. I tried reading everything i could before commenting
mjbrowny21 said:
I did not do any of that. Didn't see that anywhere in any of the instructions I read. Not exactly sure how to do all that.
I'm using Windows 7. I tried reading everything i could before commenting
Click to expand...
Click to collapse
Yeah, that's the issue. It's okay though because it's easy to fix! First, I'd uninstall the Verizon GS3 drivers and reinstall them. Then, follow the instructions here to install the Android SDK and platform tools. It also shows you how to change the path variable. You can confirm it is working by opening a command prompt and typing adb. It will spit some stuff back at you instead of telling you it can't be found.
Just fyi I didn't have to install anything extra to the Win7 laptop I used, aside from the drivers, to run that tool. It should have its own built in adb setup. Did you run it as admin?
mjbrowny21 said:
I did not do any of that. Didn't see that anywhere in any of the instructions I read. Not exactly sure how to do all that.
I'm using Windows 7. I tried reading everything i could before commenting
Click to expand...
Click to collapse
Okay
Slowly, Make sure you are logged into an account with Admin Privileges. Uninstall the Samsung drivers.
Now you should have taken the zip file that Ninja created, AND EXTRACTED it to a folder. There should be 8 files there.
On your phone make sure you've gone into settings developer options, checked USB debugging. in settings> security> down almost all the way check Unknown sources.
next re-install the Samsung driver, after the install, REBOOT the computer. YOU DON"T NEED TO INSTALL ANYTHING ELSE!
After the computer comes back up connect the phone via USB, make sure the phone shows "connected as a Multimedia Device" in the notification area.
If it does, go to the folder where you extracted Ninja's toolkit. find RootDebugfs.bat, RIGHT CLICK, "RUN AS ADMINISTRATOR"
Follow the directions will take 2-3 re-boots of the phone.
Oops, my bad. I hadn't looked at the contents of the zip at all recently. I just remembered that it needed adb (as in Noxious Ninja's original post before he made the tool). Sorry for confusing the issue, but the bottom line is adb wasn't available to the script. Pharrisworth should have solved it.
Okay this is REALLY freakin' irritating!!
I have been itching to cook up my own ROM in the kitchen...BUT I CAN'T EVEN USE IT!
I have tried installing it, multiple times (deleting everything each time to start fresh), and follow all instructions to the "T", and every single time I open Cygwin (after putting in the kitchen and renaming it) and "cd kitchen" enter "./menu", it always comes up saying "Error: The application 'gcc' is not installed - the kitchen will not function properly without it. Ensure you did not miss a step during installation! Refer to the Android Kitchen FAQ...", etc. (I could swear it installed devel > gcc when I installed Cygwin. Even used the Install all option and stuff...)
Checked out the FAQ and everything, but I still can't find it! Everything I try just doesn't work! Can someone please help?? (thank you)
R: [Q] Android Kitchen "gcc not installed" error
Thats weird.....u on ubuntu? As far a s i remember i never had to install gcc it was already there....but i could be wrong.
Uninstall gcc. Go get it from official repo, retry. If it doesn't work this is more of a question for ubuntu forums theyll get anything working on a pc.
Sent from my GT-I9300 using xda app-developers app
Haha, actually I'm using Windows XP Professional. (Though I do have it dual-booted with Zorin OS...)
Yeah and uh...I'm not sure how you would directly uninstall gcc either...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
R: [Q] Android Kitchen "gcc not installed" error
Wait.....what? Isnt zorin based off ubuntu? Why dont u install android kitchen stuff there?
Sent from my GT-I9300 using xda app-developers app
killbubble said:
Wait.....what? Isnt zorin based off ubuntu? Why dont u install android kitchen stuff there?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well, yes. It is.... I just figured it would be a lot more convenient to do everything on Windows instead.
There are times when it seems like things that were designed for Ubuntu don't really seem to work on the zorin distro. In this case, it probably will. I'm not really sure why I can't effectively connect to my phone though when in Zorin...maybe because there is a Kies for linux? I dunno...
I suppose I could try to install it though.
But anyways, more to the point! If cygwin/android kitchen was designed to also work in Windows XP/Vista/7, then why am I getting this error, and how do I fix it?
R: [Q] Android Kitchen "gcc not installed" error
Thats why i use kubuntu. Though i can't answer your question, i do know ubuntu and windows hate each other, getting that stuff to work is gonna probab be a pain.
If zorin has got problems try emulating a small os (so u dont waste too much time) based off linux (lucid puppy linux) and see if that works.
I wouldve thought people would also be modding android stuff directly on windows rather than emulating ubuntu stuff...after all android is open source.
Sent from my GT-I9300 using xda app-developers app
killbubble said:
Thats why i use kubuntu. Though i can't answer your question, i do know ubuntu and windows hate each other, getting that stuff to work is gonna probab be a pain.
If zorin has got problems try emulating a small os (so u dont waste too much time) based off linux (lucid puppy linux) and see if that works.
I wouldve thought people would also be modding android stuff directly on windows rather than emulating ubuntu stuff...after all android is open source.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay. Thanks for your suggestions. I may try and either do it on zorin, or repartition with kubuntu or something.
Too bad I can't do it in Windows...
Yeah, it's dumb that we still can't directly modify Android from Windows and have to use Linux. Well, actually, not as much "dumb" as inconvenient. Linux is free, yet it's different. I think we should be able to do it anywhere due to Android being open source.
Oh well... I don't understand why no-one else is having this problem. They have the guides for it on here (beginner's guides to making ROMs and stuff like that), and it seems as though nobody else has had this problem...or nobody even uses Windows. orz
Hopefully someone else will attempt to answer my question. thanks though. <
R: [Q] Android Kitchen "gcc not installed" error
well many developers are also pc fanatics and experiment new oses and grow to like open soyrce/free ones more than windows. many java devs use linux oses. Thats how devs roll. I use c and i like windows so i do it all in windows, but i know the editor/debugging programs are better on ubuntu than those available for windows....still....windows is...too much to shut down at times...
Sent from my GT-I9300 using xda app-developers app
killbubble said:
well many developers are also pc fanatics and experiment new oses and grow to like open soyrce/free ones more than windows. many java devs use linux oses. Thats how devs roll. I use c and i like windows so i do it all in windows, but i know the editor/debugging programs are better on ubuntu than those available for windows....still....windows is...too much to shut down at times...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You're probably right. I'm sure I'll be able to get used to it eventually, when I become a full developer. For now though, it's the learning curve. XD
Haha, yeah. That's good though. Windows is definitely enjoyable. (though I can't say much for W8. Ugh.)
So uh, I guess the Android Kitchen definitely works here in Zorin. Went to the menu without any problems. Funny still how it doesn't work in Windows....
You know, I'd probably have just skipped the whole kitchen thing and gone straight to development from source...but I'm not running on a x64 system, and therefore can't work on ICS and JB. :c
Soon though...very soon I will have all the parts to build my new computer, and not have to use this low-power laptop. >m>
Ascyndaeon said:
Okay this is REALLY freakin' irritating!!
I have been itching to cook up my own ROM in the kitchen...BUT I CAN'T EVEN USE IT!
I have tried installing it, multiple times (deleting everything each time to start fresh), and follow all instructions to the "T", and every single time I open Cygwin (after putting in the kitchen and renaming it) and "cd kitchen" enter "./menu", it always comes up saying "Error: The application 'gcc' is not installed - the kitchen will not function properly without it. Ensure you did not miss a step during installation! Refer to the Android Kitchen FAQ...", etc. (I could swear it installed devel > gcc when I installed Cygwin. Even used the Install all option and stuff...)
Checked out the FAQ and everything, but I still can't find it! Everything I try just doesn't work! Can someone please help?? (thank you)
Click to expand...
Click to collapse
My ERROR like ur ERROR.!
What should I do????
moj.enjoy said:
My ERROR like ur ERROR.!
What should I do????
Click to expand...
Click to collapse
Well, if I could go back in time 3 years I would be able to try and help you...I just tried it on Windows 10 here and everything works.
So, follow the instructions as far as even the cygwin_install.txt they provided. You should make sure you install /just/ the gcc-core and gcc-g++ when it tells you to tick the gcc (do not get the "cygwin gcc", idk if that did it, but just get the normal gcc). Follow all the others as well; far as I could tell the linux-util wasn't actually in utils (core instead I think?) but was already ticked, so don't worry about it unless it isn't.
After everything is done, make sure java is good to go and all, and cd to the kitchen location (just put the files in a new file, C:/kitchen/) and change directory to that. Then do the ./menu and it should work....
Also don't bump super old posts, not good. c: Either way I hope this helps. Real simple.
I really have no use for the kitchen anymore, since my GS3 gets CM nightlies (up to marshmallow? Wat!) and I have a Nexus 5X anyway so it's all gucci. But either way...yeah. It works to my knowledge.
Cheers~
(admin close thread nao? or can I do that...)
Ascyndaeon said:
Well, if I could go back in time 3 years I would be able to try and help you...I just tried it on Windows 10 here and everything works.
So, follow the instructions as far as even the cygwin_install.txt they provided. You should make sure you install /just/ the gcc-core and gcc-g++ when it tells you to tick the gcc (do not get the "cygwin gcc", idk if that did it, but just get the normal gcc). Follow all the others as well; far as I could tell the linux-util wasn't actually in utils (core instead I think?) but was already ticked, so don't worry about it unless it isn't.
After everything is done, make sure java is good to go and all, and cd to the kitchen location (just put the files in a new file, C:/kitchen/) and change directory to that. Then do the ./menu and it should work....
Also don't bump super old posts, not good. c: Either way I hope this helps. Real simple.
I really have no use for the kitchen anymore, since my GS3 gets CM nightlies (up to marshmallow? Wat!) and I have a Nexus 5X anyway so it's all gucci. But either way...yeah. It works to my knowledge.
Cheers~
(admin close thread nao? or can I do that...)
Click to expand...
Click to collapse
before ur comment
I found my answer with try and try..!!:laugh:
just setup cygwin again and saearch(gcc) and enable to install.
next ,another error and ...
THX for ur comment.
by the way how to create custom recovery for galaxy?
I'm glad to hear it's working for you! Hope you have great fun with it like I did. ^-^
And for the custom recovery...I say it's not really worth it unless you're really serious and can code. Not sure myself how one would make such a thing that has that access, you probably should ask somebody who's actually made them. Otherwise I strongly recommend either Team Win Recovery Project or ClockworkMod. (I use ClockworkMod, but most say twrp is better)
^-^